-.. BSD LICENSE
- Copyright (c) 2016 Solarflare Communications Inc.
- All rights reserved.
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2019-2020 Xilinx, Inc.
+ Copyright(c) 2016-2019 Solarflare Communications Inc.
This software was jointly developed between OKTET Labs (under contract
for Solarflare) and Solarflare Communications, Inc.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation
- and/or other materials provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
Solarflare libefx-based Poll Mode Driver
========================================
The SFC EFX PMD (**librte_pmd_sfc_efx**) provides poll mode driver support
-for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters and
-**Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps adapters.
+for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters,
+**Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps adapters and
+**Alveo SN1000 SmartNICs** family of 10/25/40/50/100 Gbps adapters.
SFC EFX PMD has support for the latest Linux and FreeBSD operating systems.
More information can be found at `Solarflare Communications website
- Loopback
+- SR-IOV PF
+
Non-supported Features
----------------------
Supported NICs
--------------
+- Xilinx Adapters:
+
+ - Alveo SN1022 SmartNIC
+
- Solarflare XtremeScale Adapters:
- Solarflare X2522 Dual Port SFP28 10/25GbE Adapter
------------------------------
-Config File Options
-~~~~~~~~~~~~~~~~~~~
+Build Options
+~~~~~~~~~~~~~
-The following options can be modified in the ``.config`` file.
-Please note that enabling debugging options may affect system performance.
-
-- ``CONFIG_RTE_LIBRTE_SFC_EFX_PMD`` (default **y**)
+The following build-time options may be enabled on build time using
+``-Dc_args=`` meson argument (e.g. ``-Dc_args=-DRTE_LIBRTE_SFC_EFX_DEBUG``).
- Enable compilation of Solarflare libefx-based poll-mode driver.
+Please note that enabling debugging options may affect system performance.
-- ``CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG`` (default **n**)
+- ``RTE_LIBRTE_SFC_EFX_DEBUG`` (undefined by default)
Enable compilation of the extra run-time consistency checks.
Case-insensitive 1/y/yes/on or 0/n/no/off may be used to specify
boolean parameters value.
-- ``rx_datapath`` [auto|efx|ef10|ef10_esps] (default **auto**)
+- ``rx_datapath`` [auto|efx|ef10|ef10_essb] (default **auto**)
Choose receive datapath implementation.
**auto** allows the driver itself to make a choice based on firmware
features available and required by the datapath implementation.
**efx** chooses libefx-based datapath which supports Rx scatter.
+ Supported for SFN7xxx, SFN8xxx and X2xxx family adapters only.
**ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
more efficient than libefx-based and provides richer packet type
classification.
- **ef10_esps** chooses SFNX2xxx equal stride packed stream datapath
+ **ef10_essb** chooses SFNX2xxx equal stride super-buffer datapath
which may be used on DPDK firmware variant only
(see notes about its limitations above).
+ **ef100** chooses EF100 native datapath which is the only supported
+ Rx datapath for EF100 architecture based NICs.
-- ``tx_datapath`` [auto|efx|ef10|ef10_simple] (default **auto**)
+- ``tx_datapath`` [auto|efx|ef10|ef10_simple|ef100] (default **auto**)
Choose transmit datapath implementation.
**auto** allows the driver itself to make a choice based on firmware
(full-feature firmware variant only), TSO and multi-segment mbufs.
Mbuf segments may come from different mempools, and mbuf reference
counters are treated responsibly.
+ Supported for SFN7xxx, SFN8xxx and X2xxx family adapters only.
**ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
more efficient than libefx-based but has no VLAN insertion support yet.
Mbuf segments may come from different mempools, and mbuf reference
**ef10_simple** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which
is even more faster then **ef10** but does not support multi-segment
mbufs, disallows multiple mempools and neglects mbuf reference counters.
+ **ef100** chooses EF100 native datapath which supports multi-segment
+ mbufs, VLAN insertion, inner/outer IPv4 and TCP/UDP checksum and TCP
+ segmentation offloads including VXLAN and GENEVE IPv4/IPv6 tunnels.
- ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
- ``fw_variant`` [dont-care|full-feature|ultra-low-latency|
capture-packed-stream|dpdk] (default **dont-care**)
- Choose the preferred firmware variant to use. In order for the selected
- option to have an effect, the **sfboot** utility must be configured with the
- **auto** firmware-variant option. The preferred firmware variant applies to
- all ports on the NIC.
+ Choose the preferred firmware variant to use.
+ The parameter is supported for SFN7xxX, SFN8xxx and X2xxx families only.
+ In order for the selected option to have an effect, the **sfboot** utility
+ must be configured with the **auto** firmware-variant option.
+ The preferred firmware variant applies to all ports on the NIC.
**dont-care** ensures that the driver can attach to an unprivileged function.
The datapath firmware type to use is controlled by the **sfboot**
utility.
git.droids-corp.org / dpdk.git / blobdiff