========================================
The SFC EFX PMD (**librte_pmd_sfc_efx**) provides poll mode driver support
-for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters and
-**Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps adapters.
+for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters,
+**Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps adapters and
+**Alveo SN1000 SmartNICs** family of 10/25/40/50/100 Gbps adapters.
SFC EFX PMD has support for the latest Linux and FreeBSD operating systems.
More information can be found at `Solarflare Communications website
Supported NICs
--------------
+- Xilinx Adapters:
+
+ - Alveo SN1022 SmartNIC
+
- Solarflare XtremeScale Adapters:
- Solarflare X2522 Dual Port SFP28 10/25GbE Adapter
**ef100** chooses EF100 native datapath which is the only supported
Rx datapath for EF100 architecture based NICs.
-- ``tx_datapath`` [auto|efx|ef10|ef10_simple] (default **auto**)
+- ``tx_datapath`` [auto|efx|ef10|ef10_simple|ef100] (default **auto**)
Choose transmit datapath implementation.
**auto** allows the driver itself to make a choice based on firmware
(full-feature firmware variant only), TSO and multi-segment mbufs.
Mbuf segments may come from different mempools, and mbuf reference
counters are treated responsibly.
+ Supported for SFN7xxx, SFN8xxx and X2xxx family adapters only.
**ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
more efficient than libefx-based but has no VLAN insertion support yet.
Mbuf segments may come from different mempools, and mbuf reference
**ef10_simple** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which
is even more faster then **ef10** but does not support multi-segment
mbufs, disallows multiple mempools and neglects mbuf reference counters.
+ **ef100** chooses EF100 native datapath which supports multi-segment
+ mbufs, VLAN insertion, inner/outer IPv4 and TCP/UDP checksum and TCP
+ segmentation offloads including VXLAN and GENEVE IPv4/IPv6 tunnels.
- ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
- ``fw_variant`` [dont-care|full-feature|ultra-low-latency|
capture-packed-stream|dpdk] (default **dont-care**)
- Choose the preferred firmware variant to use. In order for the selected
- option to have an effect, the **sfboot** utility must be configured with the
- **auto** firmware-variant option. The preferred firmware variant applies to
- all ports on the NIC.
+ Choose the preferred firmware variant to use.
+ The parameter is supported for SFN7xxX, SFN8xxx and X2xxx families only.
+ In order for the selected option to have an effect, the **sfboot** utility
+ must be configured with the **auto** firmware-variant option.
+ The preferred firmware variant applies to all ports on the NIC.
**dont-care** ensures that the driver can attach to an unprivileged function.
The datapath firmware type to use is controlled by the **sfboot**
utility.