-.. BSD LICENSE
- Copyright (c) 2016 Solarflare Communications Inc.
- All rights reserved.
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2019-2020 Xilinx, Inc.
+ Copyright(c) 2016-2019 Solarflare Communications Inc.
This software was jointly developed between OKTET Labs (under contract
for Solarflare) and Solarflare Communications, Inc.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation
- and/or other materials provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
Solarflare libefx-based Poll Mode Driver
========================================
- Allmulticast mode
-- TCP segmentation offload (TSO)
+- TCP segmentation offload (TSO) including VXLAN and GENEVE encapsulated
- Multicast MAC filter
- Scattered Rx DMA for packet that are larger that a single Rx descriptor
+- Receive queue interrupts
+
- Deferred receive and transmit queue start
- Transmit VLAN insertion (if running firmware variant supports it)
- Loopback
+- SR-IOV PF
+
Non-supported Features
----------------------
The features not yet supported include:
-- Receive queue interupts
-
- Priority-based flow control
- Configurable RX CRC stripping (always stripped)
It should be taken into account when mbuf pool for receive is created.
+Equal stride super-buffer mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When the receive queue uses equal stride super-buffer DMA mode, one HW Rx
+descriptor carries many Rx buffers which contiguously follow each other
+with some stride (equal to total size of rte_mbuf as mempool object).
+Each Rx buffer is an independent rte_mbuf.
+However dedicated mempool manager must be used when mempool for the Rx
+queue is created. The manager must support dequeue of the contiguous
+block of objects and provide mempool info API to get the block size.
+
+Another limitation of a equal stride super-buffer mode, imposed by the
+firmware, is that it allows for a single RSS context.
+
+
Tunnels support
---------------
- DROP
+- FLAG (supported only with ef10_essb Rx datapath)
+
+- MARK (supported only with ef10_essb Rx datapath)
+
Validating flow rules depends on the firmware variant.
-Ethernet destinaton individual/group match
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The :ref:`flow_isolated_mode` is supported.
+
+Ethernet destination individual/group match
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ethernet item supports I/G matching, if only the corresponding bit is set
-in the mask of destination address. If destinaton address in the spec is
-multicast, it matches all multicast (and broadcast) packets, oherwise it
+in the mask of destination address. If destination address in the spec is
+multicast, it matches all multicast (and broadcast) packets, otherwise it
matches unicast packets that are not filtered by other flow rules.
Exceptions to flow rules
- Solarflare X2522 Dual Port SFP28 10/25GbE Adapter
+ - Solarflare X2541 Single Port QSFP28 10/25G/100G Adapter
+
+ - Solarflare X2542 Dual Port QSFP28 10/25G/100G Adapter
+
- Solarflare Flareon [Ultra] Server Adapters:
- Solarflare SFN8522 Dual Port SFP+ Server Adapter
Case-insensitive 1/y/yes/on or 0/n/no/off may be used to specify
boolean parameters value.
-- ``rx_datapath`` [auto|efx|ef10] (default **auto**)
+- ``rx_datapath`` [auto|efx|ef10|ef10_esps] (default **auto**)
Choose receive datapath implementation.
**auto** allows the driver itself to make a choice based on firmware
**efx** chooses libefx-based datapath which supports Rx scatter.
**ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
more efficient than libefx-based and provides richer packet type
- classification, but lacks Rx scatter support.
+ classification.
+ **ef10_esps** chooses SFNX2xxx equal stride packed stream datapath
+ which may be used on DPDK firmware variant only
+ (see notes about its limitations above).
- ``tx_datapath`` [auto|efx|ef10|ef10_simple] (default **auto**)
Mbuf segments may come from different mempools, and mbuf reference
counters are treated responsibly.
**ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
- more efficient than libefx-based but has no VLAN insertion and TSO
- support yet.
+ more efficient than libefx-based but has no VLAN insertion support yet.
Mbuf segments may come from different mempools, and mbuf reference
counters are treated responsibly.
**ef10_simple** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which
- ``perf_profile`` [auto|throughput|low-latency] (default **throughput**)
- Choose hardware tunning to be optimized for either throughput or
+ Choose hardware tuning to be optimized for either throughput or
low-latency.
**auto** allows NIC firmware to make a choice based on
- installed licences and firmware variant configured using **sfboot**.
+ installed licenses and firmware variant configured using **sfboot**.
- ``stats_update_period_ms`` [long] (default **1000**)
value will select a fixed update period of **1000** milliseconds
- ``fw_variant`` [dont-care|full-feature|ultra-low-latency|
- capture-packed-stream] (default **dont-care**)
+ capture-packed-stream|dpdk] (default **dont-care**)
Choose the preferred firmware variant to use. In order for the selected
option to have an effect, the **sfboot** utility must be configured with the
**ultra-low-latency** chooses firmware with fewer features but lower latency.
**capture-packed-stream** chooses firmware for SolarCapture packed stream
mode.
+ **dpdk** chooses DPDK firmware with equal stride super-buffer Rx mode
+ for higher Rx packet rate and packet marks support and firmware subvariant
+ without checksumming on transmit for higher Tx packet rate if
+ checksumming is not required.
+
+- ``rxd_wait_timeout_ns`` [long] (default **200 us**)
+
+ Adjust timeout in nanoseconds to head-of-line block to wait for
+ Rx descriptors.
+ The accepted range is 0 to 400 ms.
+ Flow control should be enabled to make it work.
+ The value of **0** disables it and packets are dropped immediately.
+ When a packet is dropped because of no Rx descriptors,
+ ``rx_nodesc_drop_cnt`` counter grows.
+ The feature is supported only by the DPDK firmware variant when equal
+ stride super-buffer Rx mode is used.
Dynamic Logging Parameters
git.droids-corp.org / dpdk.git / blobdiff