ethdev: refine debug build option

[dpdk.git] / doc / guides / nics / sfc_efx.rst

diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index 959b52c..cf1269c 100644 (file)
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -1,5 +1,5 @@
 ..  SPDX-License-Identifier: BSD-3-Clause
-    Copyright(c) 2019-2020 Xilinx, Inc.
+    Copyright(c) 2019-2021 Xilinx, Inc.
     Copyright(c) 2016-2019 Solarflare Communications Inc.
 
     This software was jointly developed between OKTET Labs (under contract
@@ -8,7 +8,7 @@
 Solarflare libefx-based Poll Mode Driver
 ========================================
 
-The SFC EFX PMD (**librte_pmd_sfc_efx**) provides poll mode driver support
+The SFC EFX PMD (**librte_net_sfc_efx**) provides poll mode driver support
 for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters,
 **Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps adapters and
 **Alveo SN1000 SmartNICs** family of 10/25/40/50/100 Gbps adapters.
@@ -144,8 +144,9 @@ Flow API support
 Supported attributes:
 
 - Ingress
+- Transfer
 
-Supported pattern items:
+Supported pattern items (***non-transfer*** rules):
 
 - VOID
 
@@ -173,7 +174,7 @@ Supported pattern items:
 
 - NVGRE (exact match of virtual subnet ID)
 
-Supported actions:
+Supported actions (***non-transfer*** rules):
 
 - VOID
 
@@ -187,10 +188,66 @@ Supported actions:
 
 - MARK (supported only with ef10_essb Rx datapath)
 
+Supported pattern items (***transfer*** rules):
+
+- PORT_ID (cannot repeat; conflicts with other traffic source items)
+
+- PHY_PORT (cannot repeat; conflicts with other traffic source items)
+
+- PF (cannot repeat; conflicts with other traffic source items)
+
+- VF (cannot repeat; conflicts with other traffic source items)
+
+- ETH
+
+- VLAN (double-tagging is supported)
+
+- IPV4 (source/destination addresses, IP transport protocol,
+  type of service, time to live)
+
+- IPV6 (source/destination addresses, IP transport protocol,
+  traffic class, hop limit)
+
+- TCP (source/destination ports, TCP header length + TCP flags)
+
+- UDP (source/destination ports)
+
+- VXLAN (exact match of VXLAN network identifier)
+
+- GENEVE (exact match of virtual network identifier)
+
+- NVGRE (exact match of virtual subnet ID)
+
+Supported actions (***transfer*** rules):
+
+- OF_POP_VLAN
+
+- OF_PUSH_VLAN
+
+- OF_VLAN_SET_VID
+
+- OF_VLAN_SET_PCP
+
+- FLAG
+
+- MARK
+
+- PHY_PORT
+
+- PF
+
+- VF
+
+- PORT_ID
+
+- DROP
+
 Validating flow rules depends on the firmware variant.
 
 The :ref:`flow_isolated_mode` is supported.
 
+The implementation is natively thread-safe.
+
 Ethernet destination individual/group match
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -295,11 +352,19 @@ Per-Device Parameters
 ~~~~~~~~~~~~~~~~~~~~~
 
 The following per-device parameters can be passed via EAL PCI device
-whitelist option like "-w 02:00.0,arg1=value1,...".
+allow option like "-a 02:00.0,arg1=value1,...".
 
 Case-insensitive 1/y/yes/on or 0/n/no/off may be used to specify
 boolean parameters value.
 
+- ``class`` [net|vdpa] (default **net**)
+
+  Choose the mode of operation of ef100 device.
+  **net** device will work as network device and will be probed by net/sfc driver.
+  **vdpa** device will work as vdpa device and will be probed by vdpa/sfc driver.
+  If this parameter is not specified then ef100 device will operate as
+  network device.
+
 - ``rx_datapath`` [auto|efx|ef10|ef10_essb] (default **auto**)
 
   Choose receive datapath implementation.