* Features of mac/vlan filter are supported, negotiation with vhost/backend are needed to support them.
When backend can't support vlan filter, virtio app on guest should not enable vlan filter in order
to make sure the virtio port is configured correctly. E.g. do not specify '--enable-hw-vlan' in testpmd
- command line.
+ command line. Note that, mac/vlan filter is best effort: unwanted packets could still arrive.
* "RTE_PKTMBUF_HEADROOM" should be defined
no less than "sizeof(struct virtio_net_hdr_mrg_rxbuf)", which is 12 bytes when mergeable or
a virtio device needs to work in vDPA mode.
(Default: 0 (disabled))
+#. ``speed``:
+
+ It is used to specify link speed of virtio device. Link speed is a part of
+ link status structure. It could be requested by application using
+ rte_eth_link_get_nowait function.
+ (Default: 10000 (10G))
+
+#. ``vectorized``:
+
+ It is used to specify whether virtio device prefers to use vectorized path.
+ Afterwards, dependencies of vectorized path will be checked in path
+ election.
+ (Default: 0 (disabled))
+
Below devargs are supported by the virtio-user vdev:
#. ``path``:
It is used to enable virtio device packed virtqueue feature.
(Default: 0 (disabled))
+
+#. ``speed``:
+
+ It is used to specify link speed of virtio device. Link speed is a part of
+ link status structure. It could be requested by application using
+ rte_eth_link_get_nowait function.
+ (Default: 10000 (10G))
+
+
+Virtio paths Selection and Usage
+--------------------------------
+
+Logically virtio-PMD has 9 paths based on the combination of virtio features
+(Rx mergeable, In-order, Packed virtqueue), below is an introduction of these
+features:
+
+* `Rx mergeable <https://docs.oasis-open.org/virtio/virtio/v1.1/cs01/
+ virtio-v1.1-cs01.html#x1-2140004>`_: With this feature negotiated, device
+ can receive large packets by combining individual descriptors.
+* `In-order <https://docs.oasis-open.org/virtio/virtio/v1.1/cs01/
+ virtio-v1.1-cs01.html#x1-690008>`_: Some devices always use descriptors
+ in the same order in which they have been made available, these
+ devices can offer the VIRTIO_F_IN_ORDER feature. With this feature negotiated,
+ driver will use descriptors in order.
+* `Packed virtqueue <https://docs.oasis-open.org/virtio/virtio/v1.1/cs01/
+ virtio-v1.1-cs01.html#x1-610007>`_: The structure of packed virtqueue is
+ different from split virtqueue, split virtqueue is composed of available ring,
+ used ring and descriptor table, while packed virtqueue is composed of descriptor
+ ring, driver event suppression and device event suppression. The idea behind
+ this is to improve performance by avoiding cache misses and make it easier
+ for hardware to implement.
+
+Virtio paths Selection
+~~~~~~~~~~~~~~~~~~~~~~
+
+If packed virtqueue is not negotiated, below split virtqueue paths will be selected
+according to below configuration:
+
+#. Split virtqueue mergeable path: If Rx mergeable is negotiated, in-order feature is
+ not negotiated, this path will be selected.
+#. Split virtqueue non-mergeable path: If Rx mergeable and in-order feature are not
+ negotiated, also Rx offload(s) are requested, this path will be selected.
+#. Split virtqueue in-order mergeable path: If Rx mergeable and in-order feature are
+ both negotiated, this path will be selected.
+#. Split virtqueue in-order non-mergeable path: If in-order feature is negotiated and
+ Rx mergeable is not negotiated, this path will be selected.
+#. Split virtqueue vectorized Rx path: If Rx mergeable is disabled and no Rx offload
+ requested, this path will be selected.
+
+If packed virtqueue is negotiated, below packed virtqueue paths will be selected
+according to below configuration:
+
+#. Packed virtqueue mergeable path: If Rx mergeable is negotiated, in-order feature
+ is not negotiated, this path will be selected.
+#. Packed virtqueue non-mergeable path: If Rx mergeable and in-order feature are not
+ negotiated, this path will be selected.
+#. Packed virtqueue in-order mergeable path: If in-order and Rx mergeable feature are
+ both negotiated, this path will be selected.
+#. Packed virtqueue in-order non-mergeable path: If in-order feature is negotiated and
+ Rx mergeable is not negotiated, this path will be selected.
+
+Rx/Tx callbacks of each Virtio path
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Refer to above description, virtio path and corresponding Rx/Tx callbacks will
+be selected automatically. Rx callbacks and Tx callbacks for each virtio path
+are shown in below table:
+
+.. table:: Virtio Paths and Callbacks
+
+ ============================================ ================================= ========================
+ Virtio paths Rx callbacks Tx callbacks
+ ============================================ ================================= ========================
+ Split virtqueue mergeable path virtio_recv_mergeable_pkts virtio_xmit_pkts
+ Split virtqueue non-mergeable path virtio_recv_pkts virtio_xmit_pkts
+ Split virtqueue in-order mergeable path virtio_recv_pkts_inorder virtio_xmit_pkts_inorder
+ Split virtqueue in-order non-mergeable path virtio_recv_pkts_inorder virtio_xmit_pkts_inorder
+ Split virtqueue vectorized Rx path virtio_recv_pkts_vec virtio_xmit_pkts
+ Packed virtqueue mergeable path virtio_recv_mergeable_pkts_packed virtio_xmit_pkts_packed
+ Packed virtqueue non-meregable path virtio_recv_pkts_packed virtio_xmit_pkts_packed
+ Packed virtqueue in-order mergeable path virtio_recv_mergeable_pkts_packed virtio_xmit_pkts_packed
+ Packed virtqueue in-order non-mergeable path virtio_recv_pkts_packed virtio_xmit_pkts_packed
+ ============================================ ================================= ========================
+
+Virtio paths Support Status from Release to Release
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Virtio feature implementation:
+
+* In-order feature is supported since DPDK 18.08 by adding new Rx/Tx callbacks
+ ``virtio_recv_pkts_inorder`` and ``virtio_xmit_pkts_inorder``.
+* Packed virtqueue is supported since DPDK 19.02 by adding new Rx/Tx callbacks
+ ``virtio_recv_pkts_packed`` , ``virtio_recv_mergeable_pkts_packed`` and
+ ``virtio_xmit_pkts_packed``.
+
+All virtio paths support status are shown in below table:
+
+.. table:: Virtio Paths and Releases
+
+ ============================================ ============= ============= =============
+ Virtio paths 16.11 ~ 18.05 18.08 ~ 18.11 19.02 ~ 19.11
+ ============================================ ============= ============= =============
+ Split virtqueue mergeable path Y Y Y
+ Split virtqueue non-mergeable path Y Y Y
+ Split virtqueue vectorized Rx path Y Y Y
+ Split virtqueue simple Tx path Y N N
+ Split virtqueue in-order mergeable path Y Y
+ Split virtqueue in-order non-mergeable path Y Y
+ Packed virtqueue mergeable path Y
+ Packed virtqueue non-mergeable path Y
+ Packed virtqueue in-order mergeable path Y
+ Packed virtqueue in-order non-mergeable path Y
+ ============================================ ============= ============= =============
+
+QEMU Support Status
+~~~~~~~~~~~~~~~~~~~
+
+* Qemu now supports three paths of split virtqueue: Split virtqueue mergeable path,
+ Split virtqueue non-mergeable path, Split virtqueue vectorized Rx path.
+* Since qemu 4.2.0, Packed virtqueue mergeable path and Packed virtqueue non-mergeable
+ path can be supported.
+
+How to Debug
+~~~~~~~~~~~~
+
+If you meet performance drop or some other issues after upgrading the driver
+or configuration, below steps can help you identify which path you selected and
+root cause faster.
+
+#. Run vhost/virtio test case;
+#. Run "perf top" and check virtio Rx/Tx callback names;
+#. Identify which virtio path is selected refer to above table.
git.droids-corp.org / dpdk.git / blobdiff