-.. BSD LICENSE
+.. SPDX-License-Identifier: BSD-3-Clause
Copyright 2016 6WIND S.A.
- Copyright 2016 Mellanox.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of 6WIND S.A. nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ Copyright 2016 Mellanox Technologies, Ltd
.. _Generic_flow_API:
| ``mask`` | ``id`` | zeroed to match any port ID |
+----------+----------+-----------------------------+
+Item: ``MARK``
+^^^^^^^^^^^^^^
+
+Matches an arbitrary integer value which was set using the ``MARK`` action in
+a previously matched rule.
+
+This item can only specified once as a match criteria as the ``MARK`` action can
+only be specified once in a flow action.
+
+Note the value of MARK field is arbitrary and application defined.
+
+Depending on the underlying implementation the MARK item may be supported on
+the physical device, with virtual groups in the PMD or not at all.
+
+- Default ``mask`` matches any integer value.
+
+.. _table_rte_flow_item_mark:
+
+.. table:: MARK
+
+ +----------+----------+---------------------------+
+ | Field | Subfield | Value |
+ +==========+==========+===========================+
+ | ``spec`` | ``id`` | integer value |
+ +----------+--------------------------------------+
+ | ``last`` | ``id`` | upper range value |
+ +----------+----------+---------------------------+
+ | ``mask`` | ``id`` | zeroed to match any value |
+ +----------+----------+---------------------------+
+
Data matching item types
~~~~~~~~~~~~~~~~~~~~~~~~
.. table:: Mark, count then redirect
- +-------+--------+-----------+-------+
- | Index | Action | Field | Value |
- +=======+========+===========+=======+
- | 0 | MARK | ``mark`` | 0x2a |
- +-------+--------+-----------+-------+
- | 1 | COUNT |
- +-------+--------+-----------+-------+
- | 2 | QUEUE | ``queue`` | 10 |
- +-------+--------+-----------+-------+
- | 3 | END |
- +-------+----------------------------+
+ +-------+--------+------------+-------+
+ | Index | Action | Field | Value |
+ +=======+========+============+=======+
+ | 0 | MARK | ``mark`` | 0x2a |
+ +-------+--------+------------+-------+
+ | 1 | COUNT | ``shared`` | 0 |
+ | | +------------+-------+
+ | | | ``id`` | 0 |
+ +-------+--------+------------+-------+
+ | 2 | QUEUE | ``queue`` | 10 |
+ +-------+--------+------------+-------+
+ | 3 | END |
+ +-------+-----------------------------+
|
Action: ``COUNT``
^^^^^^^^^^^^^^^^^
-Enables counters for this rule.
+Adds a counter action to a matched flow.
+
+If more than one count action is specified in a single flow rule, then each
+action must specify a unique id.
-These counters can be retrieved and reset through ``rte_flow_query()``, see
+Counters can be retrieved and reset through ``rte_flow_query()``, see
``struct rte_flow_query_count``.
-- Counters can be retrieved with ``rte_flow_query()``.
-- No configurable properties.
+The shared flag indicates whether the counter is unique to the flow rule the
+action is specified with, or whether it is a shared counter.
+
+For a count action with the shared flag set, then then a global device
+namespace is assumed for the counter id, so that any matched flow rules using
+a count action with the same counter id on the same port will contribute to
+that counter.
+
+For ports within the same switch domain then the counter id namespace extends
+to all ports within that switch domain.
.. _table_rte_flow_action_count:
.. table:: COUNT
- +---------------+
- | Field |
- +===============+
- | no properties |
- +---------------+
+ +------------+---------------------+
+ | Field | Value |
+ +============+=====================+
+ | ``shared`` | shared counter flag |
+ +------------+---------------------+
+ | ``id`` | counter id |
+ +------------+---------------------+
Query structure to retrieve and reset flow rule counters:
This action modifies the payload of matched flows.
+Action: ``SET_IPV4_SRC``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new IPv4 source address in the outermost IPv4 header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_IPV4 flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv4_src:
+
+.. table:: SET_IPV4_SRC
+
+ +-----------------------------------------+
+ | Field | Value |
+ +===============+=========================+
+ | ``ipv4_addr`` | new IPv4 source address |
+ +---------------+-------------------------+
+
+Action: ``SET_IPV4_DST``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new IPv4 destination address in the outermost IPv4 header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_IPV4 flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv4_dst:
+
+.. table:: SET_IPV4_DST
+
+ +---------------+------------------------------+
+ | Field | Value |
+ +===============+==============================+
+ | ``ipv4_addr`` | new IPv4 destination address |
+ +---------------+------------------------------+
+
+Action: ``SET_IPV6_SRC``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new IPv6 source address in the outermost IPv6 header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_IPV6 flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv6_src:
+
+.. table:: SET_IPV6_SRC
+
+ +---------------+-------------------------+
+ | Field | Value |
+ +===============+=========================+
+ | ``ipv6_addr`` | new IPv6 source address |
+ +---------------+-------------------------+
+
+Action: ``SET_IPV6_DST``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new IPv6 destination address in the outermost IPv6 header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_IPV6 flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_ipv6_dst:
+
+.. table:: SET_IPV6_DST
+
+ +---------------+------------------------------+
+ | Field | Value |
+ +===============+==============================+
+ | ``ipv6_addr`` | new IPv6 destination address |
+ +---------------+------------------------------+
+
+Action: ``SET_TP_SRC``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new source port number in the outermost TCP/UDP header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_TCP or RTE_FLOW_ITEM_TYPE_UDP
+flow pattern item. Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_tp_src:
+
+.. table:: SET_TP_SRC
+
+ +----------+-------------------------+
+ | Field | Value |
+ +==========+=========================+
+ | ``port`` | new TCP/UDP source port |
+ +---------------+--------------------+
+
+Action: ``SET_TP_DST``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set a new destination port number in the outermost TCP/UDP header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_TCP or RTE_FLOW_ITEM_TYPE_UDP
+flow pattern item. Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_set_tp_dst:
+
+.. table:: SET_TP_DST
+
+ +----------+------------------------------+
+ | Field | Value |
+ +==========+==============================+
+ | ``port`` | new TCP/UDP destination port |
+ +---------------+-------------------------+
+
+Action: ``MAC_SWAP``
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Swap the source and destination MAC addresses in the outermost Ethernet
+header.
+
+It must be used with a valid RTE_FLOW_ITEM_TYPE_ETH flow pattern item.
+Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error will be returned.
+
+.. _table_rte_flow_action_mac_swap:
+
+.. table:: MAC_SWAP
+
+ +---------------+
+ | Field |
+ +===============+
+ | no properties |
+ +---------------+
+
+Action: ``DEC_TTL``
+^^^^^^^^^^^^^^^^^^^
+
+Decrease TTL value.
+
+If there is no valid RTE_FLOW_ITEM_TYPE_IPV4 or RTE_FLOW_ITEM_TYPE_IPV6
+in pattern, Some PMDs will reject rule because behaviour will be undefined.
+
+.. _table_rte_flow_action_dec_ttl:
+
+.. table:: DEC_TTL
+
+ +---------------+
+ | Field |
+ +===============+
+ | no properties |
+ +---------------+
+
+Action: ``SET_TTL``
+^^^^^^^^^^^^^^^^^^^
+
+Assigns a new TTL value.
+
+If there is no valid RTE_FLOW_ITEM_TYPE_IPV4 or RTE_FLOW_ITEM_TYPE_IPV6
+in pattern, Some PMDs will reject rule because behaviour will be undefined.
+
+.. _table_rte_flow_action_set_ttl:
+
+.. table:: SET_TTL
+
+ +---------------+--------------------+
+ | Field | Value |
+ +===============+====================+
+ | ``ttl_value`` | new TTL value |
+ +---------------+--------------------+
+
Negative types
~~~~~~~~~~~~~~
int
rte_flow_query(uint16_t port_id,
struct rte_flow *flow,
- enum rte_flow_action_type action,
+ const struct rte_flow_action *action,
void *data,
struct rte_flow_error *error);
- ``port_id``: port identifier of Ethernet device.
- ``flow``: flow rule handle to query.
-- ``action``: action type to query.
+- ``action``: action to query, this must match prototype from flow rule.
- ``data``: pointer to storage for the associated query data type.
- ``error``: perform verbose error reporting if not NULL. PMDs initialize
this structure in case of error only.
parameters and sets ``rte_errno`` to ``code``. A negative error ``code`` is
then returned.
+Object conversion
+~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+ int
+ rte_flow_conv(enum rte_flow_conv_op op,
+ void *dst,
+ size_t size,
+ const void *src,
+ struct rte_flow_error *error);
+
+Convert ``src`` to ``dst`` according to operation ``op``. Possible
+operations include:
+
+- Attributes, pattern item or action duplication.
+- Duplication of an entire pattern or list of actions.
+- Duplication of a complete flow rule description.
+- Pattern item or action name retrieval.
+
Caveats
-------