examples/l2fwd: add promiscuous mode option

[dpdk.git] / doc / guides / rawdevs / dpaa2_cmdif.rst

diff --git a/doc/guides/rawdevs/dpaa2_cmdif.rst b/doc/guides/rawdevs/dpaa2_cmdif.rst
index 20a6099..4eed661 100644 (file)
--- a/doc/guides/rawdevs/dpaa2_cmdif.rst
+++ b/doc/guides/rawdevs/dpaa2_cmdif.rst
@@ -29,53 +29,7 @@ Supported DPAA2 SoCs
 Prerequisites
 -------------
 
-There are three main pre-requisities for executing DPAA2 CMDIF on a DPAA2
-compatible board:
-
-1. **ARM 64 Tool Chain**
-
-   For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/6.3-2017.02/aarch64-linux-gnu>`_.
-
-2. **Linux Kernel**
-
-   It can be obtained from `NXP's Github hosting <https://github.com/qoriq-open-source/linux>`_.
-
-3. **Rootfile system**
-
-   Any *aarch64* supporting filesystem can be used. For example,
-   Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
-   from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
-
-As an alternative method, DPAA2 CMDIF can also be executed using images provided
-as part of SDK from NXP. The SDK includes all the above prerequisites necessary
-to bring up a DPAA2 board.
-
-The following dependencies are not part of DPDK and must be installed
-separately:
-
-- **NXP Linux SDK**
-
-  NXP Linux software development kit (SDK) includes support for family
-  of QorIQ® ARM-Architecture-based system on chip (SoC) processors
-  and corresponding boards.
-
-  It includes the Linux board support packages (BSPs) for NXP SoCs,
-  a fully operational tool chain, kernel and board specific modules.
-
-  SDK and related information can be obtained from:  `NXP QorIQ SDK  <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
-
-- **DPDK Extra Scripts**
-
-  DPAA2 based resources can be configured easily with the help of ready scripts
-  as provided in the DPDK Extra repository.
-
-  `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_.
-
-Currently supported by DPDK:
-
-- NXP SDK **2.0+**.
-- MC Firmware version **10.0.0** and higher.
-- Supported architectures:  **arm64 LE**.
+See :doc:`../platform/dpaa2` for setup information
 
 - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
 
@@ -84,17 +38,6 @@ Currently supported by DPDK:
    Some part of fslmc bus code (mc flib - object library) routines are
    dual licensed (BSD & GPLv2).
 
-Pre-Installation Configuration
-------------------------------
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``config`` file.
-
-- ``CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV`` (default ``y``)
-
-  Toggle compilation of the ``lrte_pmd_dpaa2_cmdif`` driver.
 
 Enabling logs
 -------------
@@ -108,16 +51,6 @@ For enabling logs, use the following EAL parameter:
 Using ``pmd.raw.dpaa2.cmdif`` as log matching criteria, all Event PMD logs can be
 enabled which are lower than logging ``level``.
 
-Driver Compilation
-~~~~~~~~~~~~~~~~~~
-
-To compile the DPAA2 CMDIF PMD for Linux arm64 gcc target, run the
-following ``make`` command:
-
-.. code-block:: console
-
-   cd <DPDK-source-directory>
-   make config T=arm64-dpaa2-linuxapp-gcc install
 
 Initialization
 --------------