Deprecation Notices
-------------------
-* build: The macros defined to indicate which DPDK libraries and drivers
- are included in the meson build are changing to a standardized format of
- ``RTE_LIB_<NAME>`` and ``RTE_<CLASS>_<NAME>``, where ``NAME`` is the
- upper-case component name, e.g. EAL, ETHDEV, IXGBE, and ``CLASS`` is the
- upper-case name of the device class to which a driver belongs e.g.
- ``NET``, ``CRYPTO``, ``VDPA``. The old macros are deprecated and will be
- removed in a future release.
-
-* meson: The minimum supported version of meson for configuring and building
- DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
- those users with a version earlier than 0.47.1, an updated copy of meson
- can be got using the ``pip3`` tool (or ``python3 -m pip``) for downloading
- python packages.
-
* kvargs: The function ``rte_kvargs_process`` will get a new parameter
for returning key match count. It will ease handling of no-match case.
-* eal: The terms blacklist and whitelist to describe devices used
- by DPDK will be replaced in the 20.11 relase.
- This will apply to command line arguments as well as macros.
-
- The macro ``RTE_DEV_BLACKLISTED`` will be replaced with ``RTE_DEV_EXCLUDED``
- and ``RTE_DEV_WHITELISTED`` will be replaced with ``RTE_DEV_INCLUDED``
- ``RTE_BUS_SCAN_BLACKLIST`` and ``RTE_BUS_SCAN_WHITELIST`` will be
- replaced with ``RTE_BUS_SCAN_EXCLUDED`` and ``RTE_BUS_SCAN_INCLUDED``
- respectively. Likewise ``RTE_DEVTYPE_BLACKLISTED_PCI`` and
- ``RTE_DEVTYPE_WHITELISTED_PCI`` will be replaced with
- ``RTE_DEVTYPE_EXCLUDED`` and ``RTE_DEVTYPE_INCLUDED``.
-
- The old macros will be marked as deprecated in 20.11 and any
- usage will cause a compile warning. They will be removed in
- a future release.
-
- The command line arguments to ``rte_eal_init`` will change from
- ``-b, --pci-blacklist`` to ``-x, --exclude`` and
- ``-w, --pci-whitelist`` to ``-i, --include``.
- The old command line arguments will continue to be accepted in 20.11
- but will cause a runtime warning message. The old arguments will
- be removed in a future release.
-
* eal: The function ``rte_eal_remote_launch`` will return new error codes
after read or write error on the pipe, instead of calling ``rte_panic``.
+* eal: The lcore state ``FINISHED`` will be removed from
+ the ``enum rte_lcore_state_t``.
+ The lcore state ``WAIT`` is enough to represent the same state.
+
+* eal: Making ``struct rte_intr_handle`` internal to avoid any ABI breakages
+ in future.
+
* rte_atomicNN_xxx: These APIs do not take memory order parameter. This does
not allow for writing optimized code for all the CPU architectures supported
- in DPDK. DPDK will adopt C11 atomic operations semantics and provide wrappers
- using C11 atomic built-ins. These wrappers must be used for patches that
- need to be merged in 20.08 onwards. This change will not introduce any
- performance degradation.
+ in DPDK. DPDK has adopted the atomic operations from
+ https://gcc.gnu.org/onlinedocs/gcc/_005f_005fatomic-Builtins.html. These
+ operations must be used for patches that need to be merged in 20.08 onwards.
+ This change will not introduce any performance degradation.
* rte_smp_*mb: These APIs provide full barrier functionality. However, many
- use cases do not require full barriers. To support such use cases, DPDK will
- adopt C11 barrier semantics and provide wrappers using C11 atomic built-ins.
- These wrappers must be used for patches that need to be merged in 20.08
- onwards. This change will not introduce any performance degradation.
+ use cases do not require full barriers. To support such use cases, DPDK has
+ adopted atomic operations from
+ https://gcc.gnu.org/onlinedocs/gcc/_005f_005fatomic-Builtins.html. These
+ operations and a new wrapper ``rte_atomic_thread_fence`` instead of
+ ``__atomic_thread_fence`` must be used for patches that need to be merged in
+ 20.08 onwards. This change will not introduce any performance degradation.
+
+* mbuf: The mbuf offload flags ``PKT_*`` will be renamed as ``RTE_MBUF_F_*``.
+ A compatibility layer will be kept until DPDK 22.11, except for the flags
+ that are already deprecated (``PKT_RX_L4_CKSUM_BAD``, ``PKT_RX_IP_CKSUM_BAD``,
+ ``PKT_RX_EIP_CKSUM_BAD``, ``PKT_TX_QINQ_PKT``) which will be removed.
+
+* pci: To reduce unnecessary ABIs exposed by DPDK bus driver, "rte_bus_pci.h"
+ will be made internal in 21.11 and macros/data structures/functions defined
+ in the header will not be considered as ABI anymore. This change is inspired
+ by the RFC https://patchwork.dpdk.org/project/dpdk/list/?series=17176.
* lib: will fix extending some enum/define breaking the ABI. There are multiple
samples in DPDK that enum/define terminated with a ``.*MAX.*`` value which is
us extending existing enum/define.
One solution can be using a fixed size array instead of ``.*MAX.*`` value.
-* mbuf: Some fields will be converted to dynamic API in DPDK 20.11
- in order to reserve more space for the dynamic fields, as explained in
- `this presentation <https://www.youtube.com/watch?v=Ttl6MlhmzWY>`_.
- As a consequence, the layout of the ``struct rte_mbuf`` will be re-arranged,
- avoiding impact on vectorized implementation of the driver datapaths,
- while evaluating performance gains of a better use of the first cache line.
-
-
-* ethdev: the legacy filter API, including
- ``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
- as filter types MACVLAN, ETHERTYPE, FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR,
- HASH and L2_TUNNEL, is superseded by the generic flow API (rte_flow) in
- PMDs that implement the latter.
- The legacy API will be removed in DPDK 20.11.
+* ethdev: Will add ``RTE_ETH_`` prefix to all ethdev macros/enums in v21.11.
+ Macros will be added for backward compatibility.
+ Backward compatibility macros will be removed on v22.11.
+ A few old backward compatibility macros from 2013 that does not have
+ proper prefix will be removed on v21.11.
* ethdev: The flow director API, including ``rte_eth_conf.fdir_conf`` field,
and the related structures (``rte_fdir_*`` and ``rte_eth_fdir_*``),
will be removed in DPDK 20.11.
-* ethdev: The legacy L2 tunnel filtering API is deprecated as the rest of
- the legacy filtering API.
- The functions ``rte_eth_dev_l2_tunnel_eth_type_conf`` and
- ``rte_eth_dev_l2_tunnel_offload_set`` which were not marked as deprecated,
- will be removed in DPDK 20.11.
-
* ethdev: New offload flags ``DEV_RX_OFFLOAD_FLOW_MARK`` will be added in 19.11.
This will allow application to enable or disable PMDs from updating
``rte_mbuf::hash::fdir``.
In 19.11 PMDs will still update the field even when the offload is not
enabled.
+* ethdev: ``uint32_t max_rx_pkt_len`` field of ``struct rte_eth_rxmode``, will be
+ replaced by a new ``uint32_t mtu`` field of ``struct rte_eth_conf`` in v21.11.
+ The new ``mtu`` field will be used to configure the initial device MTU via
+ ``rte_eth_dev_configure()`` API.
+ Later MTU can be changed by ``rte_eth_dev_set_mtu()`` API as done now.
+ The existing ``(struct rte_eth_dev)->data->mtu`` variable will be used to store
+ the configured ``mtu`` value,
+ and this new ``(struct rte_eth_dev)->data->dev_conf.mtu`` variable will
+ be used to store the user configuration request.
+ Unlike ``max_rx_pkt_len``, which was valid only when ``JUMBO_FRAME`` enabled,
+ ``mtu`` field will be always valid.
+ When ``mtu`` config is not provided by the application, default ``RTE_ETHER_MTU``
+ value will be used.
+ ``(struct rte_eth_dev)->data->mtu`` should be updated after MTU set successfully,
+ either by ``rte_eth_dev_configure()`` or ``rte_eth_dev_set_mtu()``.
+
+ An application may need to configure device for a specific Rx packet size, like for
+ cases ``DEV_RX_OFFLOAD_SCATTER`` is not supported and device received packet size
+ can't be bigger than Rx buffer size.
+ To cover these cases an application needs to know the device packet overhead to be
+ able to calculate the ``mtu`` corresponding to a Rx buffer size, for this
+ ``(struct rte_eth_dev_info).max_rx_pktlen`` will be kept,
+ the device packet overhead can be calculated as:
+ ``(struct rte_eth_dev_info).max_rx_pktlen - (struct rte_eth_dev_info).max_mtu``
+
* ethdev: ``rx_descriptor_done`` dev_ops and ``rte_eth_rx_descriptor_done``
will be removed in 21.11.
Existing ``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
as deprecated in DPDK 20.11, along with the associated macros ``ETH_MIRROR_*``.
This API will be fully removed in DPDK 21.11.
+* ethdev: Attribute ``shared`` of the ``struct rte_flow_action_count``
+ is deprecated and will be removed in DPDK 21.11. Shared counters should
+ be managed using shared actions API (``rte_flow_shared_action_create`` etc).
+
+* ethdev: The flow API matching pattern structures, ``struct rte_flow_item_*``,
+ should start with relevant protocol header.
+ Some matching pattern structures implements this by duplicating protocol header
+ fields in the struct. To clarify the intention and to be sure protocol header
+ is intact, will replace those fields with relevant protocol header struct.
+ In v21.02 both individual protocol header fields and the protocol header struct
+ will be added as union, target is switch usage to the protocol header by time.
+ In v21.11 LTS, protocol header fields will be cleaned and only protocol header
+ struct will remain.
+
* ethdev: Queue specific stats fields will be removed from ``struct rte_eth_stats``.
Mentioned fields are: ``q_ipackets``, ``q_opackets``, ``q_ibytes``, ``q_obytes``,
``q_errors``.
will be limited to maximum 256 queues.
Also compile time flag ``RTE_ETHDEV_QUEUE_STAT_CNTRS`` will be removed.
-* cryptodev: support for using IV with all sizes is added, J0 still can
- be used but only when IV length in following structs ``rte_crypto_auth_xform``,
- ``rte_crypto_aead_xform`` is set to zero. When IV length is greater or equal
- to one it means it represents IV, when is set to zero it means J0 is used
- directly, in this case 16 bytes of J0 need to be passed.
-
-* sched: To allow more traffic classes, flexible mapping of pipe queues to
- traffic classes, and subport level configuration of pipes and queues
- changes will be made to macros, data structures and API functions defined
- in "rte_sched.h". These changes are aligned to improvements suggested in the
- RFC https://mails.dpdk.org/archives/dev/2018-November/120035.html.
+* ethdev: The offload flag ``PKT_RX_EIP_CKSUM_BAD`` will be removed and
+ replaced by the new flag ``PKT_RX_OUTER_IP_CKSUM_BAD``. The new name is more
+ consistent with existing outer header checksum status flag naming, which
+ should help in reducing confusion about its usage.
+
+* i40e: As there are both i40evf and iavf pmd, the functions of them are
+ duplicated. And now more and more advanced features are developed on iavf.
+ To keep consistent with kernel driver's name
+ (https://patchwork.ozlabs.org/patch/970154/), i40evf is no need to maintain.
+ Starting from 21.05, the default VF driver of i40e will be iavf, but i40evf
+ can still be used if users specify the devarg "driver=i40evf". I40evf will
+ be deleted in DPDK 21.11.
+
+* net: ``s_addr`` and ``d_addr`` fields of ``rte_ether_hdr`` structure
+ will be renamed in DPDK 21.11 to avoid conflict with Windows Sockets headers.
+
+* net: The structure ``rte_ipv4_hdr`` will have two unions.
+ The first union is for existing ``version_ihl`` byte
+ and new bitfield for version and IHL.
+ The second union is for existing ``fragment_offset``
+ and new bitfield for fragment flags and offset.
+
+* vhost: The experimental tags of ``rte_vhost_driver_get_protocol_features``,
+ ``rte_vhost_driver_get_queue_num``, ``rte_vhost_crypto_create``,
+ ``rte_vhost_crypto_free``, ``rte_vhost_crypto_fetch_requests``,
+ ``rte_vhost_crypto_finalize_requests``, ``rte_vhost_crypto_set_zero_copy``,
+ ``rte_vhost_va_from_guest_pa``, ``rte_vhost_extern_callback_register``,
+ and ``rte_vhost_driver_set_protocol_features`` functions will be removed
+ and the API functions will be made stable in DPDK 21.11.
+
+* compressdev: ``min`` and ``max`` fields of ``rte_param_log2_range`` structure
+ will be renamed in DPDK 21.11 to avoid conflict with Windows Sockets headers.
+
+* cryptodev: ``min`` and ``max`` fields of ``rte_crypto_param_range`` structure
+ will be renamed in DPDK 21.11 to avoid conflict with Windows Sockets headers.
+
+* cryptodev: The field ``dataunit_len`` of the ``struct rte_crypto_cipher_xform``
+ has a limited size ``uint16_t``.
+ It will be moved and extended as ``uint32_t`` in DPDK 21.11.
+
+* cryptodev: The structure ``rte_crypto_sym_vec`` would be updated to add
+ ``dest_sgl`` to support out of place processing.
+ This field will be null for inplace processing.
+ This change is targeted for DPDK 21.11.
+
+* cryptodev: The structure ``rte_crypto_vec`` would be updated to add
+ ``tot_len`` to support total buffer length.
+ This is required for security cases like IPsec and PDCP encryption offload
+ to know how much additional memory space is available in buffer other than
+ data length so that driver/HW can write expanded size data after encryption.
+ This change is targeted for DPDK 21.11.
+
+* cryptodev: The interface between library and drivers will be marked
+ as internal in DPDK 21.11.
+
+* security: Hide structure ``rte_security_session`` and expose an opaque
+ pointer for the private data to the application which can be attached
+ to the packet while enqueuing.
+
+* security: The IPsec configuration structure
+ ``struct rte_security_ipsec_xform`` will be updated with new members to allow
+ SA lifetime configuration. A new structure would be introduced to replace the
+ current member, ``esn_soft_limit``.
+
+* security: The IPsec SA config options ``struct rte_security_ipsec_sa_options``
+ will be updated with new fields to support new features like IPsec inner
+ checksum, tunnel header verification, TSO in case of protocol offload.
+
+* eventdev: The file ``rte_eventdev_pmd.h`` will be renamed to ``eventdev_driver.h``
+ to make the driver interface as internal and the structures ``rte_eventdev_data``,
+ ``rte_eventdev`` and ``rte_eventdevs`` will be moved to a new file named
+ ``rte_eventdev_core.h`` in DPDK 21.11.
+ The ``rte_`` prefix for internal structures and functions will be removed across the
+ library.
+ The experimental eventdev trace APIs and ``rte_event_vector_pool_create``,
+ ``rte_event_eth_rx_adapter_vector_limits_get`` will be promoted to stable.
+ An 8-byte reserved field will be added to the structure ``rte_event_timer`` to
+ support future extensions.
+
+* eventdev: The structure ``rte_event_eth_rx_adapter_queue_conf`` will be
+ extended to include ``rte_event_eth_rx_adapter_event_vector_config`` elements
+ and the function ``rte_event_eth_rx_adapter_queue_event_vector_config`` will
+ be removed in DPDK 21.11.
+
+ An application can enable event vectorization by passing the desired vector
+ values to the function ``rte_event_eth_rx_adapter_queue_add`` using
+ the structure ``rte_event_eth_rx_adapter_queue_add``.
+
+* eventdev: Reserved bytes of ``rte_event_crypto_request`` is a space holder
+ for ``response_info``. Both should be decoupled for better clarity.
+ New space for ``response_info`` can be made by changing
+ ``rte_event_crypto_metadata`` type to structure from union.
+ This change is targeted for DPDK 21.11.
* metrics: The function ``rte_metrics_init`` will have a non-void return
in order to notify errors instead of calling ``rte_exit``.
-* power: ``rte_power_set_env`` function will no longer return 0 on attempt
- to set new power environment if power environment was already initialized.
- In this case the function will return -1 unless the environment is unset first
- (using ``rte_power_unset_env``). Other function usage scenarios will not change.
-
* cmdline: ``cmdline`` structure will be made opaque to hide platform-specific
content. On Linux and FreeBSD, supported prior to DPDK 20.11,
original structure will be kept until DPDK 21.11.
-* dpdk-setup.sh: This old script relies on deprecated stuff, and especially
- ``make``. Given environments are too much variables for such a simple script,
- it will be removed in DPDK 20.11.
- Some useful parts may be converted into specific scripts.
+* security: The functions ``rte_security_set_pkt_metadata`` and
+ ``rte_security_get_userdata`` will be made inline functions and additional
+ flags will be added in structure ``rte_security_ctx`` in DPDK 21.11.
+
+* cryptodev: The structure ``rte_crypto_op`` would be updated to reduce
+ reserved bytes to 2 (from 3), and use 1 byte to indicate warnings and other
+ information from the crypto/security operation. This field will be used to
+ communicate events such as soft expiry with IPsec in lookaside mode.