Deprecation Notices
-------------------
-* ring: Changes are planned to rte_ring APIs in release 17.05. Proposed
- changes include:
-
- - Removing build time options for the ring:
- CONFIG_RTE_RING_SPLIT_PROD_CONS
- CONFIG_RTE_RING_PAUSE_REP_COUNT
- - Adding an additional parameter to enqueue functions to return the
- amount of free space in the ring
- - Adding an additional parameter to dequeue functions to return the
- number of remaining elements in the ring
- - Removing direct support for watermarks in the rings, since the
- additional return value from the enqueue function makes it
- unneeded
- - Adjusting the return values of the bulk() enq/deq functions to
- make them consistent with the burst() equivalents. [Note, parameter
- to these functions are changing too, per points above, so compiler
- will flag them as needing update in legacy code]
- - Updates to some library functions e.g. rte_ring_get_memsize() to
- allow for variably-sized ring elements.
-
-* igb_uio: iomem mapping and sysfs files created for iomem and ioport in
- igb_uio will be removed, because we are able to detect these from what Linux
- has exposed, like the way we have done with uio-pci-generic. This change
- targets release 17.05.
-
-* vfio: Some functions are planned to be exported outside librte_eal in 17.05.
- VFIO APIs like ``vfio_setup_device``, ``vfio_get_group_fd`` can be used by
- subsystem other than EAL/PCI. For that, these need to be exported symbols.
- Such APIs are planned to be renamed according to ``rte_*`` naming convention
- and exported from librte_eal.
-
-* The PCI and VDEV subsystems will be converted as drivers of the new bus model.
- It will imply some EAL API changes in 17.05.
-
-* ``eth_driver`` is planned to be removed in 17.05. This currently serves as
- a placeholder for PMDs to register themselves. Changes for ``rte_bus`` will
- provide a way to handle device initialization currently being done in
- ``eth_driver``. Similarly, ``rte_pci_driver`` is planned to be removed from
- ``rte_cryptodev_driver`` in 17.05.
-
-* ethdev: an API change is planned for 17.02 for the function
- ``_rte_eth_dev_callback_process``. In 17.02 the function will return an ``int``
- instead of ``void`` and a fourth parameter ``void *ret_param`` will be added.
-
-* ABI changes are planned for 17.05 in the ``rte_mbuf`` structure: some fields
- may be reordered to facilitate the writing of ``data_off``, ``refcnt``, and
- ``nb_segs`` in one operation, because some platforms have an overhead if the
- store address is not naturally aligned. Other mbuf fields, such as the
- ``port`` field, may be moved or removed as part of this mbuf work. A
- ``timestamp`` will also be added.
-
-* The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and
- are respectively replaced by PKT_RX_VLAN_STRIPPED and
- PKT_RX_QINQ_STRIPPED, that are better described. The old flags and
- their behavior will be kept until 17.02 and will be removed in 17.05.
-
-* mempool: The functions ``rte_mempool_count`` and ``rte_mempool_free_count``
- will be removed in 17.05.
- They are replaced by ``rte_mempool_avail_count`` and
- ``rte_mempool_in_use_count`` respectively.
-
-* mempool: The functions for single/multi producer/consumer are deprecated
- and will be removed in 17.05.
- It is replaced by ``rte_mempool_generic_get/put`` functions.
+* eal: both declaring and identifying devices will be streamlined in v18.05.
+ New functions will appear to query a specific port from buses, classes of
+ device and device drivers. Device declaration will be made coherent with the
+ new scheme of device identification.
+ As such, ``rte_devargs`` device representation will change.
+
+ - removal of ``name`` and ``args`` fields.
+ - The enum ``rte_devtype`` was used to identify a bus and will disappear.
+ - The ``rte_devargs_list`` will be made private.
+ - Functions previously deprecated will change or disappear:
+
+ + ``rte_eal_devargs_add``
+ + ``rte_eal_devargs_type_count``
+ + ``rte_eal_parse_devargs_str``, replaced by ``rte_eal_devargs_parse``
+ + ``rte_eal_devargs_parse`` will change its format and use.
+ + all ``rte_devargs`` related functions will be renamed, changing the
+ ``rte_eal_devargs_`` prefix to ``rte_devargs_``.
+
+* pci: Several exposed functions are misnamed.
+ The following functions are deprecated starting from v17.11 and are replaced:
+
+ - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse``
+ - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse``
+ - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp``
+
+* eal: The semantics of the return value for the ``rte_lcore_has_role`` function
+ are planned to change in v18.05. The function currently returns 0 and <0 for
+ success and failure, respectively. This will change to 1 and 0 for true and
+ false, respectively, to make use of the function more intuitive.
+
+* eal: new ``numa_node_count`` member will be added to ``rte_config`` structure
+ in v18.05.
+
+* eal: due to internal data layout reorganization, there will be changes to
+ several structures and functions as a result of coming changes to support
+ memory hotplug in v18.05.
+ ``rte_eal_get_physmem_layout`` will be deprecated and removed in subsequent
+ releases.
+ ``rte_mem_config`` contents will change due to switch to memseg lists.
+ ``rte_memzone`` member ``memseg_id`` will no longer serve any useful purpose
+ and will be removed.
+
+* eal: a new set of mbuf mempool ops name APIs for user, platform and best
+ mempool names have been defined in ``rte_mbuf`` in v18.02. The uses of
+ ``rte_eal_mbuf_default_mempool_ops`` shall be replaced by
+ ``rte_mbuf_best_mempool_ops``.
+ The following function is now redundant and it is target to be deprecated
+ in 18.05:
+
+ - ``rte_eal_mbuf_default_mempool_ops``
+
+* mempool: several API and ABI changes are planned in v18.05.
+ The following functions, introduced for Xen, which is not supported
+ anymore since v17.11, are hard to use, not used anywhere else in DPDK.
+ Therefore they will be deprecated in v18.05 and removed in v18.08:
+
+ - ``rte_mempool_xmem_create``
+ - ``rte_mempool_xmem_size``
+ - ``rte_mempool_xmem_usage``
+
+ The following changes are planned:
+
+ - removal of ``get_capabilities`` mempool ops and related flags.
+ - substitute ``register_memory_area`` with ``populate`` ops.
+ - addition of new ops to customize required memory chunk calculation,
+ customize objects population and allocate contiguous
+ block of objects if underlying driver supports it.
+
+* mbuf: The control mbuf API will be removed in v18.05. The impacted
+ functions and macros are:
+
+ - ``rte_ctrlmbuf_init()``
+ - ``rte_ctrlmbuf_alloc()``
+ - ``rte_ctrlmbuf_free()``
+ - ``rte_ctrlmbuf_data()``
+ - ``rte_ctrlmbuf_len()``
+ - ``rte_is_ctrlmbuf()``
+ - ``CTRL_MBUF_FLAG``
+
+ The packet mbuf API should be used as a replacement.
+
+* mbuf: The opaque ``mbuf->hash.sched`` field will be updated to support generic
+ definition in line with the ethdev TM and MTR APIs. Currently, this field
+ is defined in librte_sched in a non-generic way. The new generic format
+ will contain: queue ID, traffic class, color. Field size will not change.
+
+* ethdev: a new Tx and Rx offload API was introduced on 17.11.
+ In the new API, offloads are divided into per-port and per-queue offloads.
+ Offloads are disabled by default and enabled per application request.
+ The old offloads API is target to be deprecated on 18.05. This includes:
+
+ - removal of ``ETH_TXQ_FLAGS_NO*`` flags.
+ - removal of ``txq_flags`` field from ``rte_eth_txconf`` struct.
+ - removal of the offloads bit-field from ``rte_eth_rxmode`` struct.
* ethdev: the legacy filter API, including
``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
Target release for removal of the legacy API will be defined once most
PMDs have switched to rte_flow.
-* distributor: library API will be changed to incorporate a burst-oriented
- API. This will include a change to ``rte_distributor_create``
- to specify which type of instance to create (single or burst), and
- additional calls for ``rte_distributor_poll_pkt_burst`` and
- ``rte_distributor_return_pkt_burst``, among others.
+* ethdev: A new rss level field planned in 18.05.
+ The new API add rss_level field to ``rte_eth_rss_conf`` to enable a choice
+ of RSS hash calculation on outer or inner header of tunneled packet.
-* The architecture TILE-Gx and the associated mpipe driver are not
- maintained and will be removed in 17.05.
+* i40e: The default flexible payload configuration which extracts the first 16
+ bytes of the payload for RSS will be deprecated starting from 18.02. If
+ required the previous behavior can be configured using existing flow
+ director APIs. There is no ABI/API break. This change will just remove a
+ global configuration setting and require explicit configuration.
+
+* librte_meter: The API will change to accommodate configuration profiles.
+ Most of the API functions will have an additional opaque parameter.
+
+* ring: The alignment constraints on the ring structure will be relaxed
+ to one cache line instead of two, and an empty cache line padding will
+ be added between the producer and consumer structures. The size of the
+ structure and the offset of the fields will remain the same on
+ platforms with 64B cache line, but will change on other platforms.