- ``rte_set_log_type``, replaced by ``rte_log_set_level``
- ``rte_get_log_type``, replaced by ``rte_log_get_level``
-* ring: Changes are planned to rte_ring APIs in release 17.05. Proposed
- changes include:
-
- - Removing build time options for the ring:
- CONFIG_RTE_RING_SPLIT_PROD_CONS
- CONFIG_RTE_RING_PAUSE_REP_COUNT
- - Adding an additional parameter to enqueue functions to return the
- amount of free space in the ring
- - Adding an additional parameter to dequeue functions to return the
- number of remaining elements in the ring
- - Removing direct support for watermarks in the rings, since the
- additional return value from the enqueue function makes it
- unneeded
- - Adjusting the return values of the bulk() enq/deq functions to
- make them consistent with the burst() equivalents. [Note, parameter
- to these functions are changing too, per points above, so compiler
- will flag them as needing update in legacy code]
- - Updates to some library functions e.g. rte_ring_get_memsize() to
- allow for variably-sized ring elements.
+* devargs: An ABI change is planned for 17.08 for the structure ``rte_devargs``.
+ The current version is dependent on bus-specific device identifier, which will
+ be made generic and abstracted, in order to make the EAL bus-agnostic.
+
+ Accompanying this evolution, device command line parameters will thus support
+ explicit bus definition in a device declaration.
* igb_uio: iomem mapping and sysfs files created for iomem and ioport in
igb_uio will be removed, because we are able to detect these from what Linux
has exposed, like the way we have done with uio-pci-generic. This change
targets release 17.05.
-* vfio: Some functions are planned to be exported outside librte_eal in 17.05.
- VFIO APIs like ``vfio_setup_device``, ``vfio_get_group_fd`` can be used by
- subsystem other than EAL/PCI. For that, these need to be exported symbols.
- Such APIs are planned to be renamed according to ``rte_*`` naming convention
- and exported from librte_eal.
-
-* The PCI and VDEV subsystems will be converted as drivers of the new bus model.
- It will imply some EAL API changes in 17.05.
-
-* ``eth_driver`` is planned to be removed in 17.05. This currently serves as
- a placeholder for PMDs to register themselves. Changes for ``rte_bus`` will
- provide a way to handle device initialization currently being done in
- ``eth_driver``. Similarly, ``rte_pci_driver`` is planned to be removed from
- ``rte_cryptodev_driver`` in 17.05.
-
-* ethdev: An API change is planned for 17.05 for the function
- ``_rte_eth_dev_callback_process``. In 17.05 the function will return an ``int``
- instead of ``void`` and a fourth parameter ``void *ret_param`` will be added.
-
-* ethdev: for 17.05 it is planned to deprecate the following nine rte_eth_dev_*
- functions and move them into the ixgbe PMD:
-
- ``rte_eth_dev_bypass_init``, ``rte_eth_dev_bypass_state_set``,
- ``rte_eth_dev_bypass_state_show``, ``rte_eth_dev_bypass_event_store``,
- ``rte_eth_dev_bypass_event_show``, ``rte_eth_dev_wd_timeout_store``,
- ``rte_eth_dev_bypass_wd_timeout_show``, ``rte_eth_dev_bypass_ver_show``,
- ``rte_eth_dev_bypass_wd_reset``.
-
- The following fields will be removed from ``struct eth_dev_ops``:
-
- ``bypass_init_t``, ``bypass_state_set_t``, ``bypass_state_show_t``,
- ``bypass_event_set_t``, ``bypass_event_show_t``, ``bypass_wd_timeout_set_t``,
- ``bypass_wd_timeout_show_t``, ``bypass_ver_show_t``, ``bypass_wd_reset_t``.
-
- The functions will be renamed to the following, and moved to the ``ixgbe`` PMD:
+* The VDEV subsystem will be converted as driver of the new bus model.
+ It may imply some EAL API changes in 17.08.
- ``rte_pmd_ixgbe_bypass_init``, ``rte_pmd_ixgbe_bypass_state_set``,
- ``rte_pmd_ixgbe_bypass_state_show``, ``rte_pmd_ixgbe_bypass_event_set``,
- ``rte_pmd_ixgbe_bypass_event_show``, ``rte_pmd_ixgbe_bypass_wd_timeout_set``,
- ``rte_pmd_ixgbe_bypass_wd_timeout_show``, ``rte_pmd_ixgbe_bypass_ver_show``,
- ``rte_pmd_ixgbe_bypass_wd_reset``.
+* The struct ``rte_pci_driver`` is planned to be removed from
+ ``rte_cryptodev_driver`` and ``rte_eventdev_driver`` in 17.08.
* The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and
are respectively replaced by PKT_RX_VLAN_STRIPPED and
PKT_RX_QINQ_STRIPPED, that are better described. The old flags and
- their behavior will be kept until 17.02 and will be removed in 17.05.
+ their behavior will be kept until 17.05 and will be removed in 17.08.
+
+* ethdev: Tx offloads will no longer be enabled by default in 17.08.
+ Instead, the ``rte_eth_txmode`` structure will be extended with
+ bit field to enable each Tx offload.
+ Besides of making the Rx/Tx configuration API more consistent for the
+ application, PMDs will be able to provide a better out of the box performance.
+ As part of the work, ``ETH_TXQ_FLAGS_NO*`` will be superseded as well.
* ethdev: the legacy filter API, including
``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
Target release for removal of the legacy API will be defined once most
PMDs have switched to rte_flow.
-* ABI changes are planned for 17.05 in the ``rte_cryptodev_ops`` structure.
- A pointer to a rte_cryptodev_config structure will be added to the
- function prototype ``cryptodev_configure_t``, as a new parameter.
+* cryptodev: All PMD names definitions will be moved to the individual PMDs
+ in 17.08.
+
+* cryptodev: The following changes will be done in in 17.08:
+
+ - the device type enumeration ``rte_cryptodev_type`` will be removed
+ - the following structures will be changed: ``rte_cryptodev_session``,
+ ``rte_cryptodev_sym_session``, ``rte_cryptodev_info``, ``rte_cryptodev``
+ - the function ``rte_cryptodev_count_devtype`` will be replaced by
+ ``rte_cryptodev_device_count_by_driver``
+
+* cryptodev: API changes are planned for 17.08 for the sessions management
+ to make it agnostic to the underlying devices, removing coupling with
+ crypto PMDs, so a single session can be used on multiple devices.
+
+ - ``struct rte_cryptodev_sym_session``, dev_id, dev_type will be removed,
+ _private field changed to the indirect array of private data pointers of
+ all supported devices
+
+ An API of followed functions will be changed to allow operate on multiple
+ devices with one session:
+
+ - ``rte_cryptodev_sym_session_create``
+ - ``rte_cryptodev_sym_session_free``
+ - ``rte_cryptodev_sym_session_pool_create``
+
+ While dev_id will not be stored in the ``struct rte_cryptodev_sym_session``,
+ directly, the change of followed API is required:
+
+ - ``rte_cryptodev_queue_pair_attach_sym_session``
+ - ``rte_cryptodev_queue_pair_detach_sym_session``
-* cryptodev: A new parameter ``max_nb_sessions_per_qp`` will be added to
- ``rte_cryptodev_info.sym``. Some drivers may support limited number of
- sessions per queue_pair. With this new parameter application will know
- how many sessions can be mapped to each queue_pair of a device.
+* cryptodev: the structures ``rte_crypto_op``, ``rte_crypto_sym_op``
+ and ``rte_crypto_sym_xform`` will be restructured in 17.08,
+ for correctness and improvement.
-* distributor: library API will be changed to incorporate a burst-oriented
- API. This will include a change to ``rte_distributor_create``
- to specify which type of instance to create (single or burst), and
- additional calls for ``rte_distributor_poll_pkt_burst`` and
- ``rte_distributor_return_pkt_burst``, among others.
+* librte_table: The ``key_mask`` parameter will be added to all the hash tables
+ that currently do not have it, as well as to the hash compute function prototype.
+ The non-"do-sig" versions of the hash tables will be removed
+ (including the ``signature_offset`` parameter)
+ and the "do-sig" versions renamed accordingly.