* eal: The function ``rte_eal_remote_launch`` will return new error codes
after read or write error on the pipe, instead of calling ``rte_panic``.
-* eal: The lcore state ``FINISHED`` will be removed from
- the ``enum rte_lcore_state_t``.
- The lcore state ``WAIT`` is enough to represent the same state.
-
-* eal: Making ``struct rte_intr_handle`` internal to avoid any ABI breakages
- in future.
-
* rte_atomicNN_xxx: These APIs do not take memory order parameter. This does
not allow for writing optimized code for all the CPU architectures supported
in DPDK. DPDK has adopted the atomic operations from
* mempool: The mempool API macros ``MEMPOOL_PG_*`` are deprecated and
will be removed in DPDK 22.11.
-* mbuf: The mbuf offload flags ``PKT_*`` will be renamed as ``RTE_MBUF_F_*``.
- A compatibility layer will be kept until DPDK 22.11, except for the flags
- that are already deprecated (``PKT_RX_L4_CKSUM_BAD``, ``PKT_RX_IP_CKSUM_BAD``,
- ``PKT_RX_EIP_CKSUM_BAD``, ``PKT_TX_QINQ_PKT``) which will be removed.
-
* pci: To reduce unnecessary ABIs exposed by DPDK bus driver, "rte_bus_pci.h"
will be made internal in 21.11 and macros/data structures/functions defined
in the header will not be considered as ABI anymore. This change is inspired
``RTE_ETH_FLOW_MAX`` is one sample of the mentioned case, adding a new flow
type will break the ABI because of ``flex_mask[RTE_ETH_FLOW_MAX]`` array
usage in following public struct hierarchy:
- ``rte_eth_fdir_flex_conf -> rte_fdir_conf -> rte_eth_conf (in the middle)``.
+ ``rte_eth_fdir_flex_conf -> rte_eth_fdir_conf -> rte_eth_conf (in the middle)``.
Need to identify this kind of usages and fix in 20.11, otherwise this blocks
us extending existing enum/define.
One solution can be using a fixed size array instead of ``.*MAX.*`` value.
-* ethdev: Will add ``RTE_ETH_`` prefix to all ethdev macros/enums in v21.11.
- Macros will be added for backward compatibility.
- Backward compatibility macros will be removed on v22.11.
- A few old backward compatibility macros from 2013 that does not have
- proper prefix will be removed on v21.11.
-
* ethdev: The flow director API, including ``rte_eth_conf.fdir_conf`` field,
and the related structures (``rte_fdir_*`` and ``rte_eth_fdir_*``),
will be removed in DPDK 20.11.
-* ethdev: New offload flags ``DEV_RX_OFFLOAD_FLOW_MARK`` will be added in 19.11.
- This will allow application to enable or disable PMDs from updating
- ``rte_mbuf::hash::fdir``.
- This scheme will allow PMDs to avoid writes to ``rte_mbuf`` fields on Rx and
- thereby improve Rx performance if application wishes do so.
- In 19.11 PMDs will still update the field even when the offload is not
- enabled.
-
* ethdev: Announce moving from dedicated modify function for each field,
to using the general ``rte_flow_modify_field`` action.
In v21.11 LTS, protocol header fields will be cleaned and only protocol header
struct will remain.
-* ethdev: Add new Rx queue offload flag ``RTE_ETH_RX_OFFLOAD_SHARED_RXQ`` and
- ``shared_group`` field to ``struct rte_eth_rxconf``.
-
* ethdev: Queue specific stats fields will be removed from ``struct rte_eth_stats``.
Mentioned fields are: ``q_ipackets``, ``q_opackets``, ``q_ibytes``, ``q_obytes``,
``q_errors``.
is deprecated as ambiguous with respect to the embedded switch. The use of
these attributes will become invalid starting from DPDK 22.11.
-* vhost: ``rte_vdpa_register_device``, ``rte_vdpa_unregister_device``,
- ``rte_vhost_host_notifier_ctrl`` and ``rte_vdpa_relay_vring_used`` vDPA
- driver interface will be marked as internal in DPDK v21.11.
+* ethdev: Actions ``OF_SET_MPLS_TTL``, ``OF_DEC_MPLS_TTL``, ``OF_SET_NW_TTL``,
+ ``OF_COPY_TTL_OUT``, ``OF_COPY_TTL_IN`` are deprecated as not supported by
+ any PMD, so they will be removed in DPDK 22.11.
-* vhost: rename ``struct vhost_device_ops`` to ``struct rte_vhost_device_ops``
- in DPDK v21.11.
-
-* vhost: The experimental tags of ``rte_vhost_driver_get_protocol_features``,
- ``rte_vhost_driver_get_queue_num``, ``rte_vhost_crypto_create``,
- ``rte_vhost_crypto_free``, ``rte_vhost_crypto_fetch_requests``,
- ``rte_vhost_crypto_finalize_requests``, ``rte_vhost_crypto_set_zero_copy``,
- ``rte_vhost_va_from_guest_pa``, ``rte_vhost_extern_callback_register``,
- and ``rte_vhost_driver_set_protocol_features`` functions will be removed
- and the API functions will be made stable in DPDK 21.11.
+* ethdev: Actions ``OF_DEC_NW_TTL``, ``SET_IPV4_SRC``, ``SET_IPV4_DST``,
+ ``SET_IPV6_SRC``, ``SET_IPV6_DST``, ``SET_TP_SRC``, ``SET_TP_DST``,
+ ``DEC_TTL``, ``SET_TTL``, ``SET_MAC_SRC``, ``SET_MAC_DST``, ``INC_TCP_SEQ``,
+ ``DEC_TCP_SEQ``, ``INC_TCP_ACK``, ``DEC_TCP_ACK``, ``SET_IPV4_DSCP``,
+ ``SET_IPV6_DSCP``, ``SET_TAG``, ``SET_META`` are marked as legacy and
+ superseded by the generic MODIFY_FIELD action.
+ The legacy actions should be deprecated in 22.07, once MODIFY_FIELD
+ alternative is implemented.
+ The legacy actions should be removed in DPDK 22.11.
* cryptodev: Hide structures ``rte_cryptodev_sym_session`` and
``rte_cryptodev_asym_session`` to remove unnecessary indirection between
pointer for the private data to the application which can be attached
to the packet while enqueuing.
-* eventdev: The file ``rte_eventdev_pmd.h`` will be renamed to ``eventdev_driver.h``
- to make the driver interface as internal and the structures ``rte_eventdev_data``,
- ``rte_eventdev`` and ``rte_eventdevs`` will be moved to a new file named
- ``rte_eventdev_core.h`` in DPDK 21.11.
- The ``rte_`` prefix for internal structures and functions will be removed across the
- library.
- The experimental eventdev trace APIs and ``rte_event_vector_pool_create``,
- ``rte_event_eth_rx_adapter_vector_limits_get`` will be promoted to stable.
- An 8-byte reserved field will be added to the structure ``rte_event_timer`` to
- support future extensions.
-
-* eventdev: The structure ``rte_event_eth_rx_adapter_queue_conf`` will be
- extended to include ``rte_event_eth_rx_adapter_event_vector_config`` elements
- and the function ``rte_event_eth_rx_adapter_queue_event_vector_config`` will
- be removed in DPDK 21.11.
-
- An application can enable event vectorization by passing the desired vector
- values to the function ``rte_event_eth_rx_adapter_queue_add`` using
- the structure ``rte_event_eth_rx_adapter_queue_add``.
-
* metrics: The function ``rte_metrics_init`` will have a non-void return
in order to notify errors instead of calling ``rte_exit``.
-* cmdline: ``cmdline`` structure will be made opaque to hide platform-specific
- content. On Linux and FreeBSD, supported prior to DPDK 20.11,
- original structure will be kept until DPDK 21.11.
+* raw/ioat: The ``ioat`` rawdev driver has been deprecated, since it's
+ functionality is provided through the new ``dmadev`` infrastructure.
+ To continue to use hardware previously supported by the ``ioat`` rawdev driver,
+ applications should be updated to use the ``dmadev`` library instead,
+ with the underlying HW-functionality being provided by the ``ioat`` or
+ ``idxd`` dma drivers