Deprecation Notices
-------------------
-* In 16.11 ABI changes are planned: the ``rte_eth_dev`` structure will be
- extended with new function pointer ``tx_pkt_prep`` allowing verification
- and processing of packet burst to meet HW specific requirements before
- transmit. Also new fields will be added to the ``rte_eth_desc_lim`` structure:
- ``nb_seg_max`` and ``nb_mtu_seg_max`` providing information about number of
- segments limit to be transmitted by device for TSO/non-TSO packets.
-
-* ABI changes are planned for 17.02 in the ``rte_mbuf`` structure: some fields
- may be reordered to facilitate the writing of ``data_off``, ``refcnt``, and
- ``nb_segs`` in one operation, because some platforms have an overhead if the
- store address is not naturally aligned. Other mbuf fields, such as the
- ``port`` field, may be moved or removed as part of this mbuf work. A
- ``timestamp`` will also be added.
-
-* The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and
- are respectively replaced by PKT_RX_VLAN_STRIPPED and
- PKT_RX_QINQ_STRIPPED, that are better described. The old flags and
- their behavior will be kept until 16.11 and will be removed in 17.02.
-
-* mempool: The functions ``rte_mempool_count`` and ``rte_mempool_free_count``
- will be removed in 17.02.
- They are replaced by ``rte_mempool_avail_count`` and
- ``rte_mempool_in_use_count`` respectively.
-
-* mempool: The functions for single/multi producer/consumer are deprecated
- and will be removed in 17.02.
- It is replaced by ``rte_mempool_generic_get/put`` functions.
+* eal: several API and ABI changes are planned for ``rte_devargs`` in v18.02.
+ The format of device command line parameters will change. The bus will need
+ to be explicitly stated in the device declaration. The enum ``rte_devtype``
+ was used to identify a bus and will disappear.
+ The structure ``rte_devargs`` will change.
+ The ``rte_devargs_list`` will be made private.
+ The following functions are deprecated starting from 17.08 and will either be
+ modified or removed in 18.02:
+
+ - ``rte_eal_devargs_add``
+ - ``rte_eal_devargs_type_count``
+ - ``rte_eal_parse_devargs_str``, replaced by ``rte_eal_devargs_parse``
+
+* pci: Several exposed functions are misnamed.
+ The following functions are deprecated starting from v17.11 and are replaced:
+
+ - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse``
+ - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse``
+ - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp``
+
+* ethdev: a new Tx and Rx offload API was introduced on 17.11.
+ In the new API, offloads are divided into per-port and per-queue offloads.
+ Offloads are disabled by default and enabled per application request.
+ The old offloads API is target to be deprecated on 18.05. This includes:
+
+ - removal of ``ETH_TXQ_FLAGS_NO*`` flags.
+ - removal of ``txq_flags`` field from ``rte_eth_txconf`` struct.
+ - removal of the offloads bit-field from ``rte_eth_rxmode`` struct.
+
+* ethdev: the legacy filter API, including
+ ``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
+ as filter types MACVLAN, ETHERTYPE, FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR,
+ HASH and L2_TUNNEL, is superseded by the generic flow API (rte_flow) in
+ PMDs that implement the latter.
+ Target release for removal of the legacy API will be defined once most
+ PMDs have switched to rte_flow.
+
+* i40e: The default flexible payload configuration which extracts the first 16
+ bytes of the payload for RSS will be deprecated starting from 18.02. If
+ required the previous behavior can be configured using existing flow
+ director APIs. There is no ABI/API break. This change will just remove a
+ global configuration setting and require explicit configuration.
+
+* librte_meter: The API will change to accommodate configuration profiles.
+ Most of the API functions will have an additional opaque parameter.
+
+* ring: The alignment constraints on the ring structure will be relaxed
+ to one cache line instead of two, and an empty cache line padding will
+ be added between the producer and consumer structures. The size of the
+ structure and the offset of the fields will remain the same on
+ platforms with 64B cache line, but will change on other platforms.
+
+* mbuf: The control mbuf API (``rte_ctrlmbuf_init()`` function,
+ ``rte_ctrlmbuf_alloc()`` macro, ``rte_ctrlmbuf_free()`` macro,
+ ``rte_ctrlmbuf_data()`` macro, ``rte_ctrlmbuf_len()`` macro,
+ ``rte_is_ctrlmbuf()`` macro and ``CTRL_MBUF_FLAG`` macro) will be
+ removed in v18.05. The packet mbuf API should be used as a
+ replacement.
+
+* mbuf: The mbuf flags ``PKT_TX_VLAN_PKT`` and ``PKT_TX_QINQ_PKT`` are
+ respectively renamed as ``PKT_TX_VLAN`` and ``PKT_TX_QINQ``. The old
+ names will be removed in v18.08.