Deprecation Notices
-------------------
-* build: The macros defined to indicate which DPDK libraries and drivers
- are included in the meson build are changing to a standardized format of
- ``RTE_LIB_<NAME>`` and ``RTE_<CLASS>_<NAME>``, where ``NAME`` is the
- upper-case component name, e.g. EAL, ETHDEV, IXGBE, and ``CLASS`` is the
- upper-case name of the device class to which a driver belongs e.g.
- ``NET``, ``CRYPTO``, ``VDPA``. The old macros are deprecated and will be
- removed in a future release.
-
-* meson: The minimum supported version of meson for configuring and building
- DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
- those users with a version earlier than 0.47.1, an updated copy of meson
- can be got using the ``pip3`` tool (or ``python3 -m pip``) for downloading
- python packages.
-
* kvargs: The function ``rte_kvargs_process`` will get a new parameter
for returning key match count. It will ease handling of no-match case.
-* eal: The terms blacklist and whitelist to describe devices used
- by DPDK will be replaced in the 20.11 relase.
- This will apply to command line arguments as well as macros.
-
- The macro ``RTE_DEV_BLACKLISTED`` will be replaced with ``RTE_DEV_EXCLUDED``
- and ``RTE_DEV_WHITELISTED`` will be replaced with ``RTE_DEV_INCLUDED``
- ``RTE_BUS_SCAN_BLACKLIST`` and ``RTE_BUS_SCAN_WHITELIST`` will be
- replaced with ``RTE_BUS_SCAN_EXCLUDED`` and ``RTE_BUS_SCAN_INCLUDED``
- respectively. Likewise ``RTE_DEVTYPE_BLACKLISTED_PCI`` and
- ``RTE_DEVTYPE_WHITELISTED_PCI`` will be replaced with
- ``RTE_DEVTYPE_EXCLUDED`` and ``RTE_DEVTYPE_INCLUDED``.
-
- The old macros will be marked as deprecated in 20.11 and any
- usage will cause a compile warning. They will be removed in
- a future release.
-
- The command line arguments to ``rte_eal_init`` will change from
- ``-b, --pci-blacklist`` to ``-x, --exclude`` and
- ``-w, --pci-whitelist`` to ``-i, --include``.
- The old command line arguments will continue to be accepted in 20.11
- but will cause a runtime warning message. The old arguments will
- be removed in a future release.
-
* eal: The function ``rte_eal_remote_launch`` will return new error codes
after read or write error on the pipe, instead of calling ``rte_panic``.
us extending existing enum/define.
One solution can be using a fixed size array instead of ``.*MAX.*`` value.
-* mbuf: Some fields will be converted to dynamic API in DPDK 20.11
- in order to reserve more space for the dynamic fields, as explained in
- `this presentation <https://www.youtube.com/watch?v=Ttl6MlhmzWY>`_.
- The following static fields will be moved as dynamic:
-
- - ``timestamp``
- - ``seqn``
-
- As a consequence, the layout of the ``struct rte_mbuf`` will be re-arranged,
- avoiding impact on vectorized implementation of the driver datapaths,
- while evaluating performance gains of a better use of the first cache line.
-
-
-* ethdev: the legacy filter API, including
- ``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
- as filter types MACVLAN, ETHERTYPE, FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR,
- HASH and L2_TUNNEL, is superseded by the generic flow API (rte_flow) in
- PMDs that implement the latter.
- The legacy API will be removed in DPDK 20.11.
-
* ethdev: The flow director API, including ``rte_eth_conf.fdir_conf`` field,
and the related structures (``rte_fdir_*`` and ``rte_eth_fdir_*``),
will be removed in DPDK 20.11.
-* ethdev: The legacy L2 tunnel filtering API is deprecated as the rest of
- the legacy filtering API.
- The functions ``rte_eth_dev_l2_tunnel_eth_type_conf`` and
- ``rte_eth_dev_l2_tunnel_offload_set`` which were not marked as deprecated,
- will be removed in DPDK 20.11.
-
* ethdev: New offload flags ``DEV_RX_OFFLOAD_FLOW_MARK`` will be added in 19.11.
This will allow application to enable or disable PMDs from updating
``rte_mbuf::hash::fdir``.
In 19.11 PMDs will still update the field even when the offload is not
enabled.
+* ethdev: ``uint32_t max_rx_pkt_len`` field of ``struct rte_eth_rxmode``, will be
+ replaced by a new ``uint32_t mtu`` field of ``struct rte_eth_conf`` in v21.11.
+ The new ``mtu`` field will be used to configure the initial device MTU via
+ ``rte_eth_dev_configure()`` API.
+ Later MTU can be changed by ``rte_eth_dev_set_mtu()`` API as done now.
+ The existing ``(struct rte_eth_dev)->data->mtu`` variable will be used to store
+ the configured ``mtu`` value,
+ and this new ``(struct rte_eth_dev)->data->dev_conf.mtu`` variable will
+ be used to store the user configuration request.
+ Unlike ``max_rx_pkt_len``, which was valid only when ``JUMBO_FRAME`` enabled,
+ ``mtu`` field will be always valid.
+ When ``mtu`` config is not provided by the application, default ``RTE_ETHER_MTU``
+ value will be used.
+ ``(struct rte_eth_dev)->data->mtu`` should be updated after MTU set successfully,
+ either by ``rte_eth_dev_configure()`` or ``rte_eth_dev_set_mtu()``.
+
+ An application may need to configure device for a specific Rx packet size, like for
+ cases ``DEV_RX_OFFLOAD_SCATTER`` is not supported and device received packet size
+ can't be bigger than Rx buffer size.
+ To cover these cases an application needs to know the device packet overhead to be
+ able to calculate the ``mtu`` corresponding to a Rx buffer size, for this
+ ``(struct rte_eth_dev_info).max_rx_pktlen`` will be kept,
+ the device packet overhead can be calculated as:
+ ``(struct rte_eth_dev_info).max_rx_pktlen - (struct rte_eth_dev_info).max_mtu``
+
* ethdev: ``rx_descriptor_done`` dev_ops and ``rte_eth_rx_descriptor_done``
will be removed in 21.11.
Existing ``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
as deprecated in DPDK 20.11, along with the associated macros ``ETH_MIRROR_*``.
This API will be fully removed in DPDK 21.11.
+* ethdev: Attribute ``shared`` of the ``struct rte_flow_action_count``
+ is deprecated and will be removed in DPDK 21.11. Shared counters should
+ be managed using shared actions API (``rte_flow_shared_action_create`` etc).
+
+* ethdev: The flow API matching pattern structures, ``struct rte_flow_item_*``,
+ should start with relevant protocol header.
+ Some matching pattern structures implements this by duplicating protocol header
+ fields in the struct. To clarify the intention and to be sure protocol header
+ is intact, will replace those fields with relevant protocol header struct.
+ In v21.02 both individual protocol header fields and the protocol header struct
+ will be added as union, target is switch usage to the protocol header by time.
+ In v21.11 LTS, protocol header fields will be cleaned and only protocol header
+ struct will remain.
+
* ethdev: Queue specific stats fields will be removed from ``struct rte_eth_stats``.
Mentioned fields are: ``q_ipackets``, ``q_opackets``, ``q_ibytes``, ``q_obytes``,
``q_errors``.
will be limited to maximum 256 queues.
Also compile time flag ``RTE_ETHDEV_QUEUE_STAT_CNTRS`` will be removed.
-* cryptodev: support for using IV with all sizes is added, J0 still can
- be used but only when IV length in following structs ``rte_crypto_auth_xform``,
- ``rte_crypto_aead_xform`` is set to zero. When IV length is greater or equal
- to one it means it represents IV, when is set to zero it means J0 is used
- directly, in this case 16 bytes of J0 need to be passed.
+* ethdev: The offload flag ``PKT_RX_EIP_CKSUM_BAD`` will be removed and
+ replaced by the new flag ``PKT_RX_OUTER_IP_CKSUM_BAD``. The new name is more
+ consistent with existing outer header checksum status flag naming, which
+ should help in reducing confusion about its usage.
+
+* i40e: As there are both i40evf and iavf pmd, the functions of them are
+ duplicated. And now more and more advanced features are developed on iavf.
+ To keep consistent with kernel driver's name
+ (https://patchwork.ozlabs.org/patch/970154/), i40evf is no need to maintain.
+ Starting from 21.05, the default VF driver of i40e will be iavf, but i40evf
+ can still be used if users specify the devarg "driver=i40evf". I40evf will
+ be deleted in DPDK 21.11.
+
+* eventdev: The structure ``rte_event_eth_rx_adapter_queue_conf`` will be
+ extended to include ``rte_event_eth_rx_adapter_event_vector_config`` elements
+ and the function ``rte_event_eth_rx_adapter_queue_event_vector_config`` will
+ be removed in DPDK 21.11.
+
+ An application can enable event vectorization by passing the desired vector
+ values to the function ``rte_event_eth_rx_adapter_queue_add`` using
+ the structure ``rte_event_eth_rx_adapter_queue_add``.
* sched: To allow more traffic classes, flexible mapping of pipe queues to
traffic classes, and subport level configuration of pipes and queues
* metrics: The function ``rte_metrics_init`` will have a non-void return
in order to notify errors instead of calling ``rte_exit``.
-* power: ``rte_power_set_env`` function will no longer return 0 on attempt
- to set new power environment if power environment was already initialized.
- In this case the function will return -1 unless the environment is unset first
- (using ``rte_power_unset_env``). Other function usage scenarios will not change.
-
* cmdline: ``cmdline`` structure will be made opaque to hide platform-specific
content. On Linux and FreeBSD, supported prior to DPDK 20.11,
original structure will be kept until DPDK 21.11.
-
-* dpdk-setup.sh: This old script relies on deprecated stuff, and especially
- ``make``. Given environments are too much variables for such a simple script,
- it will be removed in DPDK 20.11.
- Some useful parts may be converted into specific scripts.