Deprecation Notices
-------------------
-* make: Support for building DPDK with "make" has been deprecated and
- support will be removed in the 20.11 release. From 20.11 onwards, DPDK
- should be built using meson and ninja. For basic instructions see the
- `Quick-start Guide <https://core.dpdk.org/doc/quick-start/>`_ on the
- website or the `Getting Started Guide
- <https://doc.dpdk.org/guides/linux_gsg/build_dpdk.html>`_ document.
-
-* meson: The minimum supported version of meson for configuring and building
- DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
- those users with a version earlier than 0.47.1, an updated copy of meson
- can be got using the ``pip``, or ``pip3``, tool for downloading python
- packages.
-
* kvargs: The function ``rte_kvargs_process`` will get a new parameter
for returning key match count. It will ease handling of no-match case.
* eal: The function ``rte_eal_remote_launch`` will return new error codes
after read or write error on the pipe, instead of calling ``rte_panic``.
-* eal: The ``rte_logs`` struct and global symbol will be made private to
- remove it from the externally visible ABI and allow it to be updated in the
- future.
-
* rte_atomicNN_xxx: These APIs do not take memory order parameter. This does
not allow for writing optimized code for all the CPU architectures supported
in DPDK. DPDK will adopt C11 atomic operations semantics and provide wrappers
These wrappers must be used for patches that need to be merged in 20.08
onwards. This change will not introduce any performance degradation.
-* rte_cio_*mb: Since the IO barriers for ARMv8 platforms are relaxed from DSB
- to DMB, rte_cio_*mb APIs provide the same functionality as rte_io_*mb
- APIs (taking all platforms into consideration). rte_io_*mb APIs should be
- used in the place of rte_cio_*mb APIs. The rte_cio_*mb APIs will be
- deprecated in 20.11 release.
-
-* igb_uio: In the view of reducing the kernel dependency from the main tree,
- as a first step, the Technical Board decided to move ``igb_uio``
- kernel module to the dpdk-kmods repository in the /linux/igb_uio/ directory
- in 20.11.
- Minutes of Technical Board Meeting of `2019-11-06
- <https://mails.dpdk.org/archives/dev/2019-November/151763.html>`_.
-
* lib: will fix extending some enum/define breaking the ABI. There are multiple
samples in DPDK that enum/define terminated with a ``.*MAX.*`` value which is
used by iterators, and arrays holding these values are sized with this
us extending existing enum/define.
One solution can be using a fixed size array instead of ``.*MAX.*`` value.
-* ethdev: Split the ``struct eth_dev_ops`` struct to hide it as much as possible
- will be done in 20.11.
- Currently the ``struct eth_dev_ops`` struct is accessible by the application
- because some inline functions, like ``rte_eth_tx_descriptor_status()``,
- access the struct directly.
- The struct will be separate in two, the ops used by inline functions will be
- moved next to Rx/Tx burst functions, rest of the ``struct eth_dev_ops`` struct
- will be moved to header file for drivers to hide it from applications.
-
-* ethdev: the legacy filter API, including
- ``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
- as filter types MACVLAN, ETHERTYPE, FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR,
- HASH and L2_TUNNEL, is superseded by the generic flow API (rte_flow) in
- PMDs that implement the latter.
- Target release for removal of the legacy API will be defined once most
- PMDs have switched to rte_flow.
-
-* ethdev: Update API functions returning ``void`` to return ``int`` with
- negative errno values to indicate various error conditions (e.g.
- invalid port ID, unsupported operation, failed operation):
-
- - ``rte_eth_dev_stop``
- - ``rte_eth_dev_close``
+* ethdev: The flow director API, including ``rte_eth_conf.fdir_conf`` field,
+ and the related structures (``rte_fdir_*`` and ``rte_eth_fdir_*``),
+ will be removed in DPDK 20.11.
* ethdev: New offload flags ``DEV_RX_OFFLOAD_FLOW_MARK`` will be added in 19.11.
This will allow application to enable or disable PMDs from updating
In 19.11 PMDs will still update the field even when the offload is not
enabled.
+* ethdev: ``uint32_t max_rx_pkt_len`` field of ``struct rte_eth_rxmode``, will be
+ replaced by a new ``uint32_t mtu`` field of ``struct rte_eth_conf`` in v21.11.
+ The new ``mtu`` field will be used to configure the initial device MTU via
+ ``rte_eth_dev_configure()`` API.
+ Later MTU can be changed by ``rte_eth_dev_set_mtu()`` API as done now.
+ The existing ``(struct rte_eth_dev)->data->mtu`` variable will be used to store
+ the configured ``mtu`` value,
+ and this new ``(struct rte_eth_dev)->data->dev_conf.mtu`` variable will
+ be used to store the user configuration request.
+ Unlike ``max_rx_pkt_len``, which was valid only when ``JUMBO_FRAME`` enabled,
+ ``mtu`` field will be always valid.
+ When ``mtu`` config is not provided by the application, default ``RTE_ETHER_MTU``
+ value will be used.
+ ``(struct rte_eth_dev)->data->mtu`` should be updated after MTU set successfully,
+ either by ``rte_eth_dev_configure()`` or ``rte_eth_dev_set_mtu()``.
+
+ An application may need to configure device for a specific Rx packet size, like for
+ cases ``DEV_RX_OFFLOAD_SCATTER`` is not supported and device received packet size
+ can't be bigger than Rx buffer size.
+ To cover these cases an application needs to know the device packet overhead to be
+ able to calculate the ``mtu`` corresponding to a Rx buffer size, for this
+ ``(struct rte_eth_dev_info).max_rx_pktlen`` will be kept,
+ the device packet overhead can be calculated as:
+ ``(struct rte_eth_dev_info).max_rx_pktlen - (struct rte_eth_dev_info).max_mtu``
+
* ethdev: ``rx_descriptor_done`` dev_ops and ``rte_eth_rx_descriptor_done``
- will be deprecated in 20.11 and will be removed in 21.11.
+ will be removed in 21.11.
Existing ``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
APIs can be used as replacement.
-* ethdev: Some internal APIs for driver usage are exported in the .map file.
- Now DPDK has ``__rte_internal`` marker so we can mark internal APIs and move
- them to the INTERNAL block in .map. Although these APIs are internal it will
- break the ABI checks, that is why change is planned for 20.11.
- The list of internal APIs are mainly ones listed in ``rte_ethdev_driver.h``.
-
-* traffic manager: All traffic manager API's in ``rte_tm.h`` were mistakenly made
- ABI stable in the v19.11 release. The TM maintainer and other contributors have
- agreed to keep the TM APIs as experimental in expectation of additional spec
- improvements. Therefore, all APIs in ``rte_tm.h`` will be marked back as
- experimental in v20.11 DPDK release. For more details, please see `the thread
- <https://mails.dpdk.org/archives/dev/2020-April/164970.html>`_.
-
-* pmd_dpaa: The API ``rte_pmd_dpaa_set_tx_loopback`` will have extended
- ``port_id`` definition from ``uint8_t`` to ``uint16_t``.
-
-* cryptodev: support for using IV with all sizes is added, J0 still can
- be used but only when IV length in following structs ``rte_crypto_auth_xform``,
- ``rte_crypto_aead_xform`` is set to zero. When IV length is greater or equal
- to one it means it represents IV, when is set to zero it means J0 is used
- directly, in this case 16 bytes of J0 need to be passed.
-
-* rawdev: The rawdev APIs which take a device-specific structure as
- parameter directly, or indirectly via a "private" pointer inside another
- structure, will be modified to take an additional parameter of the
- structure size. The affected APIs will include ``rte_rawdev_info_get``,
- ``rte_rawdev_configure``, ``rte_rawdev_queue_conf_get`` and
- ``rte_rawdev_queue_setup``.
+* ethdev: The port mirroring API can be replaced with a more fine grain flow API.
+ The structs ``rte_eth_mirror_conf``, ``rte_eth_vlan_mirror`` and the functions
+ ``rte_eth_mirror_rule_set``, ``rte_eth_mirror_rule_reset`` will be marked
+ as deprecated in DPDK 20.11, along with the associated macros ``ETH_MIRROR_*``.
+ This API will be fully removed in DPDK 21.11.
+
+* ethdev: Attribute ``shared`` of the ``struct rte_flow_action_count``
+ is deprecated and will be removed in DPDK 21.11. Shared counters should
+ be managed using shared actions API (``rte_flow_shared_action_create`` etc).
+
+* ethdev: The flow API matching pattern structures, ``struct rte_flow_item_*``,
+ should start with relevant protocol header.
+ Some matching pattern structures implements this by duplicating protocol header
+ fields in the struct. To clarify the intention and to be sure protocol header
+ is intact, will replace those fields with relevant protocol header struct.
+ In v21.02 both individual protocol header fields and the protocol header struct
+ will be added as union, target is switch usage to the protocol header by time.
+ In v21.11 LTS, protocol header fields will be cleaned and only protocol header
+ struct will remain.
+
+* ethdev: Queue specific stats fields will be removed from ``struct rte_eth_stats``.
+ Mentioned fields are: ``q_ipackets``, ``q_opackets``, ``q_ibytes``, ``q_obytes``,
+ ``q_errors``.
+ Instead queue stats will be received via xstats API. Current method support
+ will be limited to maximum 256 queues.
+ Also compile time flag ``RTE_ETHDEV_QUEUE_STAT_CNTRS`` will be removed.
+
+* ethdev: The offload flag ``PKT_RX_EIP_CKSUM_BAD`` will be removed and
+ replaced by the new flag ``PKT_RX_OUTER_IP_CKSUM_BAD``. The new name is more
+ consistent with existing outer header checksum status flag naming, which
+ should help in reducing confusion about its usage.
+
+* i40e: As there are both i40evf and iavf pmd, the functions of them are
+ duplicated. And now more and more advanced features are developed on iavf.
+ To keep consistent with kernel driver's name
+ (https://patchwork.ozlabs.org/patch/970154/), i40evf is no need to maintain.
+ Starting from 21.05, the default VF driver of i40e will be iavf, but i40evf
+ can still be used if users specify the devarg "driver=i40evf". I40evf will
+ be deleted in DPDK 21.11.
+
+* eventdev: The structure ``rte_event_eth_rx_adapter_queue_conf`` will be
+ extended to include ``rte_event_eth_rx_adapter_event_vector_config`` elements
+ and the function ``rte_event_eth_rx_adapter_queue_event_vector_config`` will
+ be removed in DPDK 21.11.
+
+ An application can enable event vectorization by passing the desired vector
+ values to the function ``rte_event_eth_rx_adapter_queue_add`` using
+ the structure ``rte_event_eth_rx_adapter_queue_add``.
* sched: To allow more traffic classes, flexible mapping of pipe queues to
traffic classes, and subport level configuration of pipes and queues
in "rte_sched.h". These changes are aligned to improvements suggested in the
RFC https://mails.dpdk.org/archives/dev/2018-November/120035.html.
-* mbuf: ``refcnt_atomic`` member in structures ``rte_mbuf`` and
- ``rte_mbuf_ext_shared_info`` is of type ``rte_atomic16_t``. Due to adoption
- of C11 atomic builtins it will be of type ``uint16_t``. ``refcnt_atomic``
- will be removed in 20.11. It will be replaced with ``refcnt`` of type
- ``uint16_t``.
-
* metrics: The function ``rte_metrics_init`` will have a non-void return
in order to notify errors instead of calling ``rte_exit``.
-* power: ``rte_power_set_env`` function will no longer return 0 on attempt
- to set new power environment if power environment was already initialized.
- In this case the function will return -1 unless the environment is unset first
- (using ``rte_power_unset_env``). Other function usage scenarios will not change.
-
-* python: Since the beginning of 2020, Python 2 has officially reached
- end-of-support: https://www.python.org/doc/sunset-python-2/.
- Python 2 support will be completely removed in 20.11.
- In 20.08, explicit deprecation warnings will be displayed when running
- scripts with Python 2.
+* cmdline: ``cmdline`` structure will be made opaque to hide platform-specific
+ content. On Linux and FreeBSD, supported prior to DPDK 20.11,
+ original structure will be kept until DPDK 21.11.