+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright 2018 The DPDK contributors
+
ABI and API Deprecation
=======================
Deprecation Notices
-------------------
-* eal: the following functions are deprecated starting from 17.05 and will
- be removed in 17.08:
-
- - ``rte_set_log_level``, replaced by ``rte_log_set_global_level``
- - ``rte_get_log_level``, replaced by ``rte_log_get_global_level``
- - ``rte_set_log_type``, replaced by ``rte_log_set_level``
- - ``rte_get_log_type``, replaced by ``rte_log_get_level``
-
-* devargs: An ABI change is planned for 17.08 for the structure ``rte_devargs``.
- The current version is dependent on bus-specific device identifier, which will
- be made generic and abstracted, in order to make the EAL bus-agnostic.
-
- Accompanying this evolution, device command line parameters will thus support
- explicit bus definition in a device declaration.
-
-* igb_uio: iomem mapping and sysfs files created for iomem and ioport in
- igb_uio will be removed, because we are able to detect these from what Linux
- has exposed, like the way we have done with uio-pci-generic. This change
- targets release 17.05.
-
-* The VDEV subsystem will be converted as driver of the new bus model.
- It may imply some EAL API changes in 17.08.
+* meson: The minimum supported version of meson for configuring and building
+ DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
+ those users with a version earlier than 0.47.1, an updated copy of meson
+ can be got using the ``pip``, or ``pip3``, tool for downloading python
+ packages.
-* The struct ``rte_pci_driver`` is planned to be removed from
- ``rte_cryptodev_driver`` and ``rte_eventdev_driver`` in 17.08.
+* kvargs: The function ``rte_kvargs_process`` will get a new parameter
+ for returning key match count. It will ease handling of no-match case.
-* ethdev: An API change is planned for 17.08 for the function
- ``_rte_eth_dev_callback_process``. In 17.08 the function will return an ``int``
- instead of ``void`` and a fourth parameter ``void *ret_param`` will be added.
+* eal: both declaring and identifying devices will be streamlined in v18.11.
+ New functions will appear to query a specific port from buses, classes of
+ device and device drivers. Device declaration will be made coherent with the
+ new scheme of device identification.
+ As such, ``rte_devargs`` device representation will change.
-* ethdev: for 17.08 it is planned to deprecate the following nine rte_eth_dev_*
- functions and move them into the ixgbe PMD:
+ - The enum ``rte_devtype`` was used to identify a bus and will disappear.
+ - Functions previously deprecated will change or disappear:
- ``rte_eth_dev_bypass_init``, ``rte_eth_dev_bypass_state_set``,
- ``rte_eth_dev_bypass_state_show``, ``rte_eth_dev_bypass_event_store``,
- ``rte_eth_dev_bypass_event_show``, ``rte_eth_dev_wd_timeout_store``,
- ``rte_eth_dev_bypass_wd_timeout_show``, ``rte_eth_dev_bypass_ver_show``,
- ``rte_eth_dev_bypass_wd_reset``.
+ + ``rte_eal_devargs_type_count``
- The following fields will be removed from ``struct eth_dev_ops``:
+* vfio: removal of ``rte_vfio_dma_map`` and ``rte_vfio_dma_unmap`` APIs which
+ have been replaced with ``rte_dev_dma_map`` and ``rte_dev_dma_unmap``
+ functions. The due date for the removal targets DPDK 20.02.
- ``bypass_init_t``, ``bypass_state_set_t``, ``bypass_state_show_t``,
- ``bypass_event_set_t``, ``bypass_event_show_t``, ``bypass_wd_timeout_set_t``,
- ``bypass_wd_timeout_show_t``, ``bypass_ver_show_t``, ``bypass_wd_reset_t``.
+* pci: Several exposed functions are misnamed.
+ The following functions are deprecated starting from v17.11 and are replaced:
- The functions will be renamed to the following, and moved to the ``ixgbe`` PMD:
+ - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse``
+ - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse``
+ - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp``
- ``rte_pmd_ixgbe_bypass_init``, ``rte_pmd_ixgbe_bypass_state_set``,
- ``rte_pmd_ixgbe_bypass_state_show``, ``rte_pmd_ixgbe_bypass_event_set``,
- ``rte_pmd_ixgbe_bypass_event_show``, ``rte_pmd_ixgbe_bypass_wd_timeout_set``,
- ``rte_pmd_ixgbe_bypass_wd_timeout_show``, ``rte_pmd_ixgbe_bypass_ver_show``,
- ``rte_pmd_ixgbe_bypass_wd_reset``.
-
-* The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and
- are respectively replaced by PKT_RX_VLAN_STRIPPED and
- PKT_RX_QINQ_STRIPPED, that are better described. The old flags and
- their behavior will be kept until 17.05 and will be removed in 17.08.
-
-* ethdev: Tx offloads will no longer be enabled by default in 17.08.
- Instead, the ``rte_eth_txmode`` structure will be extended with
- bit field to enable each Tx offload.
- Besides of making the Rx/Tx configuration API more consistent for the
- application, PMDs will be able to provide a better out of the box performance.
- As part of the work, ``ETH_TXQ_FLAGS_NO*`` will be superseded as well.
+* dpaa2: removal of ``rte_dpaa2_memsegs`` structure which has been replaced
+ by a pa-va search library. This structure was earlier being used for holding
+ memory segments used by dpaa2 driver for faster pa->va translation. This
+ structure would be made internal (or removed if all dependencies are cleared)
+ in future releases.
* ethdev: the legacy filter API, including
``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
Target release for removal of the legacy API will be defined once most
PMDs have switched to rte_flow.
-* cryptodev: All PMD names definitions will be moved to the individual PMDs
- in 17.08.
-
-* cryptodev: The following changes will be done in in 17.08:
-
- - the device type enumeration ``rte_cryptodev_type`` will be removed
- - the following structures will be changed: ``rte_cryptodev_session``,
- ``rte_cryptodev_sym_session``, ``rte_cryptodev_info``, ``rte_cryptodev``
- - the function ``rte_cryptodev_count_devtype`` will be replaced by
- ``rte_cryptodev_device_count_by_driver``
-
-* cryptodev: API changes are planned for 17.08 for the sessions management
- to make it agnostic to the underlying devices, removing coupling with
- crypto PMDs, so a single session can be used on multiple devices.
-
- - ``struct rte_cryptodev_sym_session``, dev_id, dev_type will be removed,
- _private field changed to the indirect array of private data pointers of
- all supported devices
+* kni: remove KNI ethtool support. To clarify, this is not to remove the KNI,
+ but only to remove ethtool support of it that is disabled by default and
+ can be enabled via ``CONFIG_RTE_KNI_KMOD_ETHTOOL`` config option.
+ Existing KNI ethtool implementation is only supported by ``igb`` & ``ixgbe``
+ drivers, by using a copy of kernel drivers in DPDK. This model cannot be
+ extended to all drivers in DPDK and it is too much effort to maintain
+ kernel modules in DPDK. As a result users won't be able to use ``ethtool``
+ via ``igb`` & ``ixgbe`` anymore.
- An API of followed functions will be changed to allow operate on multiple
- devices with one session:
+* cryptodev: New member in ``rte_cryptodev_config`` to allow applications to
+ disable features supported by the crypto device. Only the following features
+ would be allowed to be disabled this way,
- - ``rte_cryptodev_sym_session_create``
- - ``rte_cryptodev_sym_session_free``
- - ``rte_cryptodev_sym_session_pool_create``
+ - ``RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO``
+ - ``RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO``
+ - ``RTE_CRYPTODEV_FF_SECURITY``
- While dev_id will not be stored in the ``struct rte_cryptodev_sym_session``,
- directly, the change of followed API is required:
+ Disabling unused features would facilitate efficient usage of HW/SW offload.
- - ``rte_cryptodev_queue_pair_attach_sym_session``
- - ``rte_cryptodev_queue_pair_detach_sym_session``
+ - Member ``uint64_t ff_disable`` in ``rte_cryptodev_config``
-* crypto/scheduler: the following two functions are deprecated starting
- from 17.05 and will be removed in 17.08:
+ The field would be added in v19.08.
- - ``rte_crpytodev_scheduler_mode_get``, replaced by ``rte_cryptodev_scheduler_mode_get``
- - ``rte_crpytodev_scheduler_mode_set``, replaced by ``rte_cryptodev_scheduler_mode_set``
+* cryptodev: the ``uint8_t *data`` member of ``key`` structure in the xforms
+ structure (``rte_crypto_cipher_xform``, ``rte_crypto_auth_xform``, and
+ ``rte_crypto_aead_xform``) will be changed to ``const uint8_t *data``.