+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright 2018 The DPDK contributors
+
ABI and API Deprecation
=======================
Deprecation Notices
-------------------
-* eal: the following functions are deprecated starting from 17.05 and will
- be removed in 17.11:
-
- - ``rte_set_log_level``, replaced by ``rte_log_set_global_level``
- - ``rte_get_log_level``, replaced by ``rte_log_get_global_level``
- - ``rte_set_log_type``, replaced by ``rte_log_set_level``
- - ``rte_get_log_type``, replaced by ``rte_log_get_level``
-
-* eal: several API and ABI changes are planned for ``rte_devargs`` in v17.11.
- The format of device command line parameters will change. The bus will need
- to be explicitly stated in the device declaration. The enum ``rte_devtype``
- was used to identify a bus and will disappear.
- The structure ``rte_devargs`` will change.
- The ``rte_devargs_list`` will be made private.
- The following functions are deprecated starting from 17.08 and will either be
- modified or removed in 17.11:
-
- - ``rte_eal_devargs_add``
- - ``rte_eal_devargs_type_count``
- - ``rte_eal_parse_devargs_str``, replaced by ``rte_eal_devargs_parse``
-
-* eal: the support of Xen dom0 will be removed from EAL in 17.11; and with
- that, drivers/net/xenvirt and examples/vhost_xen will also be removed.
-
-* eal: An ABI change is planned for 17.11 to make DPDK aware of IOVA address
- translation scheme.
- Reference to phys address in EAL data-structure or functions may change to
- IOVA address or more appropriate name.
- The change will be only for the name.
- Functional aspects of the API or data-structure will remain same.
-
-* The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and
- are respectively replaced by PKT_RX_VLAN_STRIPPED and
- PKT_RX_QINQ_STRIPPED, that are better described. The old flags and
- their behavior will be kept until 17.08 and will be removed in 17.11.
-
-* mempool: The following will be modified in 17.11:
-
- - ``rte_mempool_xmem_size`` and ``rte_mempool_xmem_usage`` need to know
- the mempool flag status so adding new param rte_mempool in those API.
- - Removing __rte_unused int flag param from ``rte_mempool_generic_put``
- and ``rte_mempool_generic_get`` API.
- - ``rte_mempool`` flags data type will changed from int to
- unsigned int.
-
-* ethdev: Tx offloads will no longer be enabled by default in 17.11.
- Instead, the ``rte_eth_txmode`` structure will be extended with
- bit field to enable each Tx offload.
- Besides of making the Rx/Tx configuration API more consistent for the
- application, PMDs will be able to provide a better out of the box performance.
- As part of the work, ``ETH_TXQ_FLAGS_NO*`` will be superseded as well.
+* meson: The minimum supported version of meson for configuring and building
+ DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
+ those users with a version earlier than 0.47.1, an updated copy of meson
+ can be got using the ``pip``, or ``pip3``, tool for downloading python
+ packages.
+
+* kvargs: The function ``rte_kvargs_process`` will get a new parameter
+ for returning key match count. It will ease handling of no-match case.
+
+* eal: both declaring and identifying devices will be streamlined in v18.11.
+ New functions will appear to query a specific port from buses, classes of
+ device and device drivers. Device declaration will be made coherent with the
+ new scheme of device identification.
+ As such, ``rte_devargs`` device representation will change.
+
+ - The enum ``rte_devtype`` was used to identify a bus and will disappear.
+ - Functions previously deprecated will change or disappear:
+
+ + ``rte_eal_devargs_type_count``
+
+* vfio: removal of ``rte_vfio_dma_map`` and ``rte_vfio_dma_unmap`` APIs which
+ have been replaced with ``rte_dev_dma_map`` and ``rte_dev_dma_unmap``
+ functions. The due date for the removal targets DPDK 20.02.
+
+* pci: Several exposed functions are misnamed.
+ The following functions are deprecated starting from v17.11 and are replaced:
+
+ - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse``
+ - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse``
+ - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp``
+
+* dpaa2: removal of ``rte_dpaa2_memsegs`` structure which has been replaced
+ by a pa-va search library. This structure was earlier being used for holding
+ memory segments used by dpaa2 driver for faster pa->va translation. This
+ structure would be made internal (or removed if all dependencies are cleared)
+ in future releases.
* ethdev: the legacy filter API, including
``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
Target release for removal of the legacy API will be defined once most
PMDs have switched to rte_flow.
-* ethdev: The device flag advertizing hotplug capability
- ``RTE_ETH_DEV_DETACHABLE`` is not needed anymore and will be removed in
- v17.11.
- This capability is verified upon calling the relevant hotplug functions in EAL
- by checking that the ``unplug`` ops is set in the bus. This verification is
- done by the EAL and not by the ``ethdev`` layer anymore. Users relying on this
- flag being present only have to remove their checks to follow the change.
-
-* ABI/API changes are planned for 17.11 in all structures which include port_id
- definition such as "rte_eth_dev_data", "rte_port_ethdev_reader_params",
- "rte_port_ethdev_writer_params", and so on. The definition of port_id will be
- changed from 8 bits to 16 bits in order to support more than 256 ports in
- DPDK. All APIs which have port_id parameter will be changed at the same time.
-
-* ethdev: An ABI change is planned for 17.11 for the structure rte_eth_dev_data.
- The size of the unique name will increase RTE_ETH_NAME_MAX_LEN from 32 to
- 64 characters to allow using a globally unique identifier (GUID) in this field.
-
-* ethdev: new parameters - ``rte_security_capabilities`` and
- ``rte_security_ops`` will be added to ``rte_eth_dev_info`` and
- ``rte_eth_dev`` respectively to support security operations like
- ipsec inline.
-
-* cryptodev: new parameters - ``rte_security_capabilities`` and
- ``rte_security_ops`` will be added to ``rte_cryptodev_info`` and
- ``rte_cryptodev`` respectively to support security protocol offloaded
- operations.
-
-* cryptodev: the following function is deprecated starting from 17.08 and will
- be removed in 17.11:
-
- - ``rte_cryptodev_create_vdev``
-
-* cryptodev: the following function will be static in 17.11 and included
- by all crypto drivers, therefore, will not be public:
-
- - ``rte_cryptodev_vdev_pmd_init``
-
-* librte_table: The ``key_mask`` parameter will be added to all the hash tables
- that currently do not have it, as well as to the hash compute function prototype.
- The non-"do-sig" versions of the hash tables will be removed
- (including the ``signature_offset`` parameter)
- and the "do-sig" versions renamed accordingly.
+* kni: remove KNI ethtool support. To clarify, this is not to remove the KNI,
+ but only to remove ethtool support of it that is disabled by default and
+ can be enabled via ``CONFIG_RTE_KNI_KMOD_ETHTOOL`` config option.
+ Existing KNI ethtool implementation is only supported by ``igb`` & ``ixgbe``
+ drivers, by using a copy of kernel drivers in DPDK. This model cannot be
+ extended to all drivers in DPDK and it is too much effort to maintain
+ kernel modules in DPDK. As a result users won't be able to use ``ethtool``
+ via ``igb`` & ``ixgbe`` anymore.
+
+* cryptodev: New member in ``rte_cryptodev_config`` to allow applications to
+ disable features supported by the crypto device. Only the following features
+ would be allowed to be disabled this way,
+
+ - ``RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO``
+ - ``RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO``
+ - ``RTE_CRYPTODEV_FF_SECURITY``
+
+ Disabling unused features would facilitate efficient usage of HW/SW offload.
+
+ - Member ``uint64_t ff_disable`` in ``rte_cryptodev_config``
+
+ The field would be added in v19.08.
+
+* cryptodev: the ``uint8_t *data`` member of ``key`` structure in the xforms
+ structure (``rte_crypto_cipher_xform``, ``rte_crypto_auth_xform``, and
+ ``rte_crypto_aead_xform``) will be changed to ``const uint8_t *data``.