Deprecation Notices
-------------------
-* linux: Linux kernel version 3.2 (which is the current minimum required
- version for the DPDK) is not maintained anymore. Therefore the planned
- minimum required kernel version for DPDK 19.02 will be the next oldest
- Long Term Stable (LTS) version which is 3.16, but compatibility for
- recent distribution kernels will be kept.
+* meson: The minimum supported version of meson for configuring and building
+ DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
+ those users with a version earlier than 0.47.1, an updated copy of meson
+ can be got using the ``pip``, or ``pip3``, tool for downloading python
+ packages.
* kvargs: The function ``rte_kvargs_process`` will get a new parameter
for returning key match count. It will ease handling of no-match case.
+ ``rte_eal_devargs_type_count``
+* vfio: removal of ``rte_vfio_dma_map`` and ``rte_vfio_dma_unmap`` APIs which
+ have been replaced with ``rte_dev_dma_map`` and ``rte_dev_dma_unmap``
+ functions. The due date for the removal targets DPDK 20.02.
+
* pci: Several exposed functions are misnamed.
The following functions are deprecated starting from v17.11 and are replaced:
structure would be made internal (or removed if all dependencies are cleared)
in future releases.
-* mbuf: The opaque ``mbuf->hash.sched`` field will be updated to support generic
- definition in line with the ethdev TM and MTR APIs. Currently, this field
- is defined in librte_sched in a non-generic way. The new generic format
- will contain: queue ID, traffic class, color. Field size will not change.
-
-* sched: Some API functions will change prototype due to the above
- deprecation note for mbuf->hash.sched, e.g. ``rte_sched_port_pkt_write()``
- and ``rte_sched_port_pkt_read()`` will likely have an additional parameter
- of type ``struct rte_sched_port``.
-
-* mbuf: the macro ``RTE_MBUF_INDIRECT()`` will be removed in v18.08 or later and
- replaced with ``RTE_MBUF_CLONED()`` which is already added in v18.05. As
- ``EXT_ATTACHED_MBUF`` is newly introduced in v18.05, ``RTE_MBUF_INDIRECT()``
- can no longer be mutually exclusive with ``RTE_MBUF_DIRECT()`` if the new
- experimental API ``rte_pktmbuf_attach_extbuf()`` is used. Removal of the macro
- is to fix this semantic inconsistency.
-
* ethdev: the legacy filter API, including
``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
as filter types MACVLAN, ETHERTYPE, FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR,
Target release for removal of the legacy API will be defined once most
PMDs have switched to rte_flow.
-* ethdev: Maximum and minimum MTU values vary between hardware devices. In
- hardware agnostic DPDK applications access to such information would allow
- a more accurate way of validating and setting supported MTU values on a per
- device basis rather than using a defined default for all devices. To
- resolve this, the following members will be added to ``rte_eth_dev_info``.
- Note: these can be added to fit a hole in the existing structure for amd64
- but not for 32-bit, as such ABI change will occur as size of the structure
- will increase.
-
- - Member ``uint16_t min_mtu`` the minimum MTU allowed.
- - Member ``uint16_t max_mtu`` the maximum MTU allowed.
-
-* security: New field ``uint64_t opaque_data`` is planned to be added into
- ``rte_security_session`` structure. That would allow upper layer to easily
- associate/de-associate some user defined data with the security session.
-
-* cryptodev: several API and ABI changes are planned for rte_cryptodev
- in v19.02:
-
- - The size and layout of ``rte_cryptodev_sym_session`` will change
- to fix existing issues.
- - The size and layout of ``rte_cryptodev_qp_conf`` and syntax of
- ``rte_cryptodev_queue_pair_setup`` will change to to allow to use
- two different mempools for crypto and device private sessions.
+* kni: remove KNI ethtool support. To clarify, this is not to remove the KNI,
+ but only to remove ethtool support of it that is disabled by default and
+ can be enabled via ``CONFIG_RTE_KNI_KMOD_ETHTOOL`` config option.
+ Existing KNI ethtool implementation is only supported by ``igb`` & ``ixgbe``
+ drivers, by using a copy of kernel drivers in DPDK. This model cannot be
+ extended to all drivers in DPDK and it is too much effort to maintain
+ kernel modules in DPDK. As a result users won't be able to use ``ethtool``
+ via ``igb`` & ``ixgbe`` anymore.
+
+* meter: New ``rte_color`` definition will be added in 19.02 and that will
+ replace ``enum rte_meter_color`` in meter library in 19.05. This will help
+ to consolidate color definition, which is currently replicated in many places,
+ such as: rte_meter.h, rte_mtr.h, rte_tm.h.
+
+* cryptodev: New member in ``rte_cryptodev_config`` to allow applications to
+ disable features supported by the crypto device. Only the following features
+ would be allowed to be disabled this way,
+
+ - ``RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO``
+ - ``RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO``
+ - ``RTE_CRYPTODEV_FF_SECURITY``
+
+ Disabling unused features would facilitate efficient usage of HW/SW offload.
+
+ - Member ``uint64_t ff_disable`` in ``rte_cryptodev_config``
+
+ The field would be added in v19.08.
+
+* cryptodev: the ``uint8_t *data`` member of ``key`` structure in the xforms
+ structure (``rte_crypto_cipher_xform``, ``rte_crypto_auth_xform``, and
+ ``rte_crypto_aead_xform``) will be changed to ``const uint8_t *data``.
git.droids-corp.org / dpdk.git / blobdiff