Deprecation Notices
-------------------
-* build: The macros defined to indicate which DPDK libraries and drivers
- are included in the meson build are changing to a standardized format of
- ``RTE_LIB_<NAME>`` and ``RTE_<CLASS>_<NAME>``, where ``NAME`` is the
- upper-case component name, e.g. EAL, ETHDEV, IXGBE, and ``CLASS`` is the
- upper-case name of the device class to which a driver belongs e.g.
- ``NET``, ``CRYPTO``, ``VDPA``. The old macros are deprecated and will be
- removed in a future release.
-
* kvargs: The function ``rte_kvargs_process`` will get a new parameter
for returning key match count. It will ease handling of no-match case.
* eal: The function ``rte_eal_remote_launch`` will return new error codes
after read or write error on the pipe, instead of calling ``rte_panic``.
+* eal: Making ``struct rte_intr_handle`` internal to avoid any ABI breakages
+ in future.
+
* rte_atomicNN_xxx: These APIs do not take memory order parameter. This does
not allow for writing optimized code for all the CPU architectures supported
- in DPDK. DPDK will adopt C11 atomic operations semantics and provide wrappers
- using C11 atomic built-ins. These wrappers must be used for patches that
- need to be merged in 20.08 onwards. This change will not introduce any
- performance degradation.
+ in DPDK. DPDK has adopted the atomic operations from
+ https://gcc.gnu.org/onlinedocs/gcc/_005f_005fatomic-Builtins.html. These
+ operations must be used for patches that need to be merged in 20.08 onwards.
+ This change will not introduce any performance degradation.
* rte_smp_*mb: These APIs provide full barrier functionality. However, many
- use cases do not require full barriers. To support such use cases, DPDK will
- adopt C11 barrier semantics and provide wrappers using C11 atomic built-ins.
- These wrappers must be used for patches that need to be merged in 20.08
- onwards. This change will not introduce any performance degradation.
+ use cases do not require full barriers. To support such use cases, DPDK has
+ adopted atomic operations from
+ https://gcc.gnu.org/onlinedocs/gcc/_005f_005fatomic-Builtins.html. These
+ operations and a new wrapper ``rte_atomic_thread_fence`` instead of
+ ``__atomic_thread_fence`` must be used for patches that need to be merged in
+ 20.08 onwards. This change will not introduce any performance degradation.
+
+* mbuf: The mbuf offload flags ``PKT_*`` will be renamed as ``RTE_MBUF_F_*``.
+ A compatibility layer will be kept until DPDK 22.11, except for the flags
+ that are already deprecated (``PKT_RX_L4_CKSUM_BAD``, ``PKT_RX_IP_CKSUM_BAD``,
+ ``PKT_RX_EIP_CKSUM_BAD``, ``PKT_TX_QINQ_PKT``) which will be removed.
+
+* pci: To reduce unnecessary ABIs exposed by DPDK bus driver, "rte_bus_pci.h"
+ will be made internal in 21.11 and macros/data structures/functions defined
+ in the header will not be considered as ABI anymore. This change is inspired
+ by the RFC https://patchwork.dpdk.org/project/dpdk/list/?series=17176.
* lib: will fix extending some enum/define breaking the ABI. There are multiple
samples in DPDK that enum/define terminated with a ``.*MAX.*`` value which is
us extending existing enum/define.
One solution can be using a fixed size array instead of ``.*MAX.*`` value.
+* ethdev: Will add ``RTE_ETH_`` prefix to all ethdev macros/enums in v21.11.
+ Macros will be added for backward compatibility.
+ Backward compatibility macros will be removed on v22.11.
+ A few old backward compatibility macros from 2013 that does not have
+ proper prefix will be removed on v21.11.
+
* ethdev: The flow director API, including ``rte_eth_conf.fdir_conf`` field,
and the related structures (``rte_fdir_*`` and ``rte_eth_fdir_*``),
will be removed in DPDK 20.11.
In 19.11 PMDs will still update the field even when the offload is not
enabled.
+* ethdev: ``uint32_t max_rx_pkt_len`` field of ``struct rte_eth_rxmode``, will be
+ replaced by a new ``uint32_t mtu`` field of ``struct rte_eth_conf`` in v21.11.
+ The new ``mtu`` field will be used to configure the initial device MTU via
+ ``rte_eth_dev_configure()`` API.
+ Later MTU can be changed by ``rte_eth_dev_set_mtu()`` API as done now.
+ The existing ``(struct rte_eth_dev)->data->mtu`` variable will be used to store
+ the configured ``mtu`` value,
+ and this new ``(struct rte_eth_dev)->data->dev_conf.mtu`` variable will
+ be used to store the user configuration request.
+ Unlike ``max_rx_pkt_len``, which was valid only when ``JUMBO_FRAME`` enabled,
+ ``mtu`` field will be always valid.
+ When ``mtu`` config is not provided by the application, default ``RTE_ETHER_MTU``
+ value will be used.
+ ``(struct rte_eth_dev)->data->mtu`` should be updated after MTU set successfully,
+ either by ``rte_eth_dev_configure()`` or ``rte_eth_dev_set_mtu()``.
+
+ An application may need to configure device for a specific Rx packet size, like for
+ cases ``DEV_RX_OFFLOAD_SCATTER`` is not supported and device received packet size
+ can't be bigger than Rx buffer size.
+ To cover these cases an application needs to know the device packet overhead to be
+ able to calculate the ``mtu`` corresponding to a Rx buffer size, for this
+ ``(struct rte_eth_dev_info).max_rx_pktlen`` will be kept,
+ the device packet overhead can be calculated as:
+ ``(struct rte_eth_dev_info).max_rx_pktlen - (struct rte_eth_dev_info).max_mtu``
+
* ethdev: ``rx_descriptor_done`` dev_ops and ``rte_eth_rx_descriptor_done``
will be removed in 21.11.
Existing ``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
will be limited to maximum 256 queues.
Also compile time flag ``RTE_ETHDEV_QUEUE_STAT_CNTRS`` will be removed.
-* Broadcom bnxt PMD: NetXtreme devices belonging to the ``BCM573xx and
- BCM5740x`` families will no longer be supported as of DPDK 21.02.
- Specifically the support for the following Broadcom PCI IDs will be removed
- from the release: ``0x16c8, 0x16c9, 0x16ca, 0x16ce, 0x16cf, 0x16df,``
- ``0x16d0, 0x16d1, 0x16d2, 0x16d4, 0x16d5, 0x16e7, 0x16e8, 0x16e9``.
+* ethdev: The offload flag ``PKT_RX_EIP_CKSUM_BAD`` will be removed and
+ replaced by the new flag ``PKT_RX_OUTER_IP_CKSUM_BAD``. The new name is more
+ consistent with existing outer header checksum status flag naming, which
+ should help in reducing confusion about its usage.
+
+* i40e: As there are both i40evf and iavf pmd, the functions of them are
+ duplicated. And now more and more advanced features are developed on iavf.
+ To keep consistent with kernel driver's name
+ (https://patchwork.ozlabs.org/patch/970154/), i40evf is no need to maintain.
+ Starting from 21.05, the default VF driver of i40e will be iavf, but i40evf
+ can still be used if users specify the devarg "driver=i40evf". I40evf will
+ be deleted in DPDK 21.11.
+
+* net: ``s_addr`` and ``d_addr`` fields of ``rte_ether_hdr`` structure
+ will be renamed in DPDK 21.11 to avoid conflict with Windows Sockets headers.
+
+* net: The structure ``rte_ipv4_hdr`` will have two unions.
+ The first union is for existing ``version_ihl`` byte
+ and new bitfield for version and IHL.
+ The second union is for existing ``fragment_offset``
+ and new bitfield for fragment flags and offset.
-* sched: To allow more traffic classes, flexible mapping of pipe queues to
- traffic classes, and subport level configuration of pipes and queues
- changes will be made to macros, data structures and API functions defined
- in "rte_sched.h". These changes are aligned to improvements suggested in the
- RFC https://mails.dpdk.org/archives/dev/2018-November/120035.html.
+* compressdev: ``min`` and ``max`` fields of ``rte_param_log2_range`` structure
+ will be renamed in DPDK 21.11 to avoid conflict with Windows Sockets headers.
+
+* cryptodev: ``min`` and ``max`` fields of ``rte_crypto_param_range`` structure
+ will be renamed in DPDK 21.11 to avoid conflict with Windows Sockets headers.
+
+* cryptodev: The field ``dataunit_len`` of the ``struct rte_crypto_cipher_xform``
+ has a limited size ``uint16_t``.
+ It will be moved and extended as ``uint32_t`` in DPDK 21.11.
+
+* cryptodev: The interface between library and drivers will be marked
+ as internal in DPDK 21.11.
+
+* eventdev: The structure ``rte_event_eth_rx_adapter_queue_conf`` will be
+ extended to include ``rte_event_eth_rx_adapter_event_vector_config`` elements
+ and the function ``rte_event_eth_rx_adapter_queue_event_vector_config`` will
+ be removed in DPDK 21.11.
+
+ An application can enable event vectorization by passing the desired vector
+ values to the function ``rte_event_eth_rx_adapter_queue_add`` using
+ the structure ``rte_event_eth_rx_adapter_queue_add``.
* metrics: The function ``rte_metrics_init`` will have a non-void return
in order to notify errors instead of calling ``rte_exit``.
* cmdline: ``cmdline`` structure will be made opaque to hide platform-specific
content. On Linux and FreeBSD, supported prior to DPDK 20.11,
original structure will be kept until DPDK 21.11.
+
+* security: The functions ``rte_security_set_pkt_metadata`` and
+ ``rte_security_get_userdata`` will be made inline functions and additional
+ flags will be added in structure ``rte_security_ctx`` in DPDK 21.11.
git.droids-corp.org / dpdk.git / blobdiff