+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright 2017 The DPDK contributors
+
DPDK Release 17.02
==================
-.. **Read this first.**
+New Features
+------------
- The text below explains how to update the release notes.
+* **Added support for representing buses in EAL**
- Use proper spelling, capitalization and punctuation in all sections.
+ The ``rte_bus`` structure was introduced into the EAL. This allows for
+ devices to be represented by buses they are connected to. A new bus can be
+ added to DPDK by extending the ``rte_bus`` structure and implementing the
+ scan and probe functions. Once a new bus is registered using the provided
+ APIs, new devices can be detected and initialized using bus scan and probe
+ callbacks.
- Variable and config names should be quoted as fixed width text: ``LIKE_THIS``.
+ With this change, devices other than PCI or VDEV type can be represented
+ in the DPDK framework.
- Build the docs and view the output file to ensure the changes are correct::
+* **Added generic EAL API for I/O device memory read/write operations.**
- make doc-guides-html
+ This API introduces 8 bit, 16 bit, 32 bit and 64 bit I/O device
+ memory read/write operations along with "relaxed" versions.
- firefox build/doc/html/guides/rel_notes/release_17_02.html
+ Weakly-ordered architectures like ARM need an additional I/O barrier for
+ device memory read/write access over PCI bus. By introducing the EAL
+ abstraction for I/O device memory read/write access, the drivers can access
+ I/O device memory in an architecture-agnostic manner. The relaxed version
+ does not have an additional I/O memory barrier, which is useful in accessing
+ the device registers of integrated controllers which is implicitly strongly
+ ordered with respect to memory access.
+* **Added generic flow API (rte_flow).**
-New Features
-------------
+ This API provides a generic means to configure hardware to match specific
+ ingress or egress traffic, alter its behavior and query related counters
+ according to any number of user-defined rules.
-.. This section should contain new features added in this release. Sample format:
+ In order to expose a single interface with an unambiguous behavior that is
+ common to all poll-mode drivers (PMDs) the ``rte_flow`` API is slightly
+ higher-level than the legacy filtering framework, which it encompasses and
+ supersedes (including all functions and filter types) .
- * **Add a title in the past tense with a full stop.**
+ See the :doc:`../prog_guide/rte_flow` documentation for more information.
- Add a short 1-2 sentence description in the past tense. The description
- should be enough to allow someone scanning the release notes to understand
- the new feature.
+* **Added firmware version get API.**
- If the feature adds a lot of sub-features you can use a bullet list like this.
+ Added a new function ``rte_eth_dev_fw_version_get()`` to fetch the firmware
+ version for a given device.
- * Added feature foo to do something.
- * Enhanced feature bar to do something else.
+* **Added APIs for MACsec offload support to the ixgbe PMD.**
- Refer to the previous release notes for examples.
+ Six new APIs have been added to the ixgbe PMD for MACsec offload support.
+ The declarations for the APIs can be found in ``rte_pmd_ixgbe.h``.
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+* **Added I219 NICs support.**
-* **Added generic flow API (rte_flow).**
+ Added support for I219 Intel 1GbE NICs.
- This API provides a generic means to configure hardware to match specific
- ingress or egress traffic, alter its fate and query related counters
- according to any number of user-defined rules.
+* **Added VF Daemon (VFD) for i40e. - EXPERIMENTAL**
- It is slightly higher-level than the legacy filtering framework which it
- encompasses and supersedes (including all functions and filter types) in
- order to expose a single interface with an unambiguous behavior that is
- common to all poll-mode drivers (PMDs).
+ This is an EXPERIMENTAL feature to enhance the capability of the DPDK PF as
+ many VF management features are not currently supported by the kernel PF
+ driver. Some new private APIs are implemented directly in the PMD without an
+ abstraction layer. They can be used directly by some users who have the
+ need.
- See the :ref:`Generic flow API <Generic_flow_API>` documentation for more
- information.
+ The new APIs to control VFs directly from PF include:
-* **Added APIs for MACsec offload support to the ixgbe PMD.**
+ * Set VF MAC anti-spoofing.
+ * Set VF VLAN anti-spoofing.
+ * Set TX loopback.
+ * Set VF unicast promiscuous mode.
+ * Set VF multicast promiscuous mode.
+ * Set VF MTU.
+ * Get/reset VF stats.
+ * Set VF MAC address.
+ * Set VF VLAN stripping.
+ * Vf VLAN insertion.
+ * Set VF broadcast mode.
+ * Set VF VLAN tag.
+ * Set VF VLAN filter.
- Six new APIs have been added to the ixgbe PMD for MACsec offload support.
- The declarations for the APIs can be found in ``rte_pmd_ixgbe.h``.
+ VFD also includes VF to PF mailbox message management from an application.
+ When the PF receives mailbox messages from the VF the PF should call the
+ callback provided by the application to know if they're permitted to be
+ processed.
+ As an EXPERIMENTAL feature, please be aware it can be changed or even
+ removed without prior notice.
-Resolved Issues
----------------
+* **Updated the i40e base driver.**
-.. This section should contain bug fixes added to the relevant sections. Sample format:
+ Updated the i40e base driver, including the following changes:
- * **code/section Fixed issue in the past tense with a full stop.**
+ * Replace existing legacy ``memcpy()`` calls with ``i40e_memcpy()`` calls.
+ * Use ``BIT()`` macro instead of bit fields.
+ * Add clear all WoL filters implementation.
+ * Add broadcast promiscuous control per VLAN.
+ * Remove unused ``X722_SUPPORT`` and ``I40E_NDIS_SUPPORT`` macros.
- Add a short 1-2 sentence description of the resolved issue in the past tense.
- The title should contain the code/lib section like a commit message.
- Add the entries in alphabetic order in the relevant sections below.
+* **Updated the enic driver.**
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ * Set new Rx checksum flags in mbufs to indicate unknown, good or bad checksums.
+ * Fix set/remove of MAC addresses. Allow up to 64 addresses per device.
+ * Enable TSO on outer headers.
+* **Added Solarflare libefx-based network PMD.**
-EAL
-~~~
+ Added a new network PMD which supports Solarflare SFN7xxx and SFN8xxx family
+ of 10/40 Gbps adapters.
+* **Updated the mlx4 driver.**
-Drivers
-~~~~~~~
+ * Addressed a few bugs.
+* **Added support for Mellanox ConnectX-5 adapters (mlx5).**
-Libraries
-~~~~~~~~~
+ Added support for Mellanox ConnectX-5 family of 10/25/40/50/100 Gbps
+ adapters to the existing mlx5 PMD.
+* **Updated the mlx5 driver.**
-Examples
-~~~~~~~~
+ * Improve Tx performance by using vector logic.
+ * Improve RSS balancing when number of queues is not a power of two.
+ * Generic flow API support for Ethernet, IPv4, IPv4, UDP, TCP, VLAN and
+ VXLAN pattern items with DROP and QUEUE actions.
+ * Support for extended statistics.
+ * Addressed several data path bugs.
+ * As of MLNX_OFED 4.0-1.0.1.0, the Toeplitz RSS hash function is not
+ symmetric anymore for consistency with other PMDs.
-* **examples/ethtool: Fixed crash with non-PCI devices.**
+* **virtio-user with vhost-kernel as another exceptional path.**
- Querying a non-PCI device was dereferencing non-existent PCI data
- resulting in a segmentation fault.
+ Previously, we upstreamed a virtual device, virtio-user with vhost-user as
+ the backend as a way of enabling IPC (Inter-Process Communication) and user
+ space container networking.
+ Virtio-user with vhost-kernel as the backend is a solution for the exception
+ path, such as KNI, which exchanges packets with the kernel networking stack.
+ This solution is very promising in:
-Other
-~~~~~
+ * Maintenance: vhost and vhost-net (kernel) is an upstreamed and extensively
+ used kernel module.
+ * Features: vhost-net is designed to be a networking solution, which has
+ lots of networking related features, like multi-queue, TSO, multi-seg
+ mbuf, etc.
+ * Performance: similar to KNI, this solution would use one or more
+ kthreads to send/receive packets from user space DPDK applications,
+ which has little impact on user space polling thread (except that
+ it might enter into kernel space to wake up those kthreads if
+ necessary).
+* **Added virtio Rx interrupt support.**
-Known Issues
-------------
+ Added a feature to enable Rx interrupt mode for virtio pci net devices as
+ bound to VFIO (noiommu mode) and driven by virtio PMD.
-.. This section should contain new known issues in this release. Sample format:
+ With this feature, the virtio PMD can switch between polling mode and
+ interrupt mode, to achieve best performance, and at the same time save
+ power. It can work on both legacy and modern virtio devices. In this mode,
+ each ``rxq`` is mapped with an excluded MSIx interrupt.
- * **Add title in present tense with full stop.**
+ See the :ref:`Virtio Interrupt Mode <virtio_interrupt_mode>` documentation
+ for more information.
- Add a short 1-2 sentence description of the known issue in the present
- tense. Add information on any known workarounds.
+* **Added ARMv8 crypto PMD.**
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ A new crypto PMD has been added, which provides combined mode cryptographic
+ operations optimized for ARMv8 processors. The driver can be used to enhance
+ performance in processing chained operations such as cipher + HMAC.
+* **Updated the QAT PMD.**
-API Changes
------------
+ The QAT PMD has been updated with additional support for:
-.. This section should contain API changes. Sample format:
+ * DES algorithm.
+ * Scatter-gather list (SGL) support.
- * Add a short 1-2 sentence description of the API change. Use fixed width
- quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past tense.
+* **Updated the AESNI MB PMD.**
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ * The Intel(R) Multi Buffer Crypto for IPsec library used in
+ AESNI MB PMD has been moved to a new repository, in GitHub.
+ * Support has been added for single operations (cipher only and
+ authentication only).
+* **Updated the AES-NI GCM PMD.**
-ABI Changes
------------
+ The AES-NI GCM PMD was migrated from the Multi Buffer library to the ISA-L
+ library. The migration entailed adding additional support for:
-.. This section should contain ABI changes. Sample format:
+ * GMAC algorithm.
+ * 256-bit cipher key.
+ * Session-less mode.
+ * Out-of place processing
+ * Scatter-gather support for chained mbufs (only out-of place and destination
+ mbuf must be contiguous)
- * Add a short 1-2 sentence description of the ABI change that was announced in
- the previous releases and made in this release. Use fixed width quotes for
- ``rte_function_names`` or ``rte_struct_names``. Use the past tense.
+* **Added crypto performance test application.**
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ Added a new performance test application for measuring performance
+ parameters of PMDs available in the crypto tree.
+* **Added Elastic Flow Distributor library (rte_efd).**
+ Added a new library which uses perfect hashing to determine a target/value
+ for a given incoming flow key.
-Shared Library Versions
------------------------
+ The library does not store the key itself for lookup operations, and
+ therefore, lookup performance is not dependent on the key size. Also, the
+ target/value can be any arbitrary value (8 bits by default). Finally, the
+ storage requirement is much smaller than a hash-based flow table and
+ therefore, it can better fit in CPU cache and scale to millions of flow
+ keys.
-.. Update any library version updated in this release and prepend with a ``+``
- sign, like this:
+ See the :ref:`Elastic Flow Distributor Library <Efd_Library>` documentation in
+ the Programmers Guide document, for more information.
- librte_acl.so.2
- + librte_cfgfile.so.2
- librte_cmdline.so.2
- This section is a comment. do not overwrite or remove it.
- =========================================================
+Resolved Issues
+---------------
+Drivers
+~~~~~~~
+
+* **net/virtio: Fixed multiple process support.**
+
+ Fixed a few regressions introduced in recent releases that break the virtio
+ multiple process support.
+
+
+Examples
+~~~~~~~~
+
+* **examples/ethtool: Fixed crash with non-PCI devices.**
+
+ Fixed issue where querying a non-PCI device was dereferencing non-existent
+ PCI data resulting in a segmentation fault.
+
+
+API Changes
+-----------
+
+* **Moved five APIs for VF management from the ethdev to the ixgbe PMD.**
+
+ The following five APIs for VF management from the PF have been removed from
+ the ethdev, renamed, and added to the ixgbe PMD::
+
+ rte_eth_dev_set_vf_rate_limit()
+ rte_eth_dev_set_vf_rx()
+ rte_eth_dev_set_vf_rxmode()
+ rte_eth_dev_set_vf_tx()
+ rte_eth_dev_set_vf_vlan_filter()
+
+ The API's have been renamed to the following::
+
+ rte_pmd_ixgbe_set_vf_rate_limit()
+ rte_pmd_ixgbe_set_vf_rx()
+ rte_pmd_ixgbe_set_vf_rxmode()
+ rte_pmd_ixgbe_set_vf_tx()
+ rte_pmd_ixgbe_set_vf_vlan_filter()
+
+ The declarations for the API’s can be found in ``rte_pmd_ixgbe.h``.
+
+
+Shared Library Versions
+-----------------------
The libraries prepended with a plus sign were incremented in this version.
librte_cryptodev.so.2
librte_distributor.so.1
librte_eal.so.3
- librte_ethdev.so.5
+ + librte_ethdev.so.6
librte_hash.so.2
librte_ip_frag.so.1
librte_jobstats.so.1
Tested Platforms
----------------
-.. This section should contain a list of platforms that were tested with this release.
+This release has been tested with the below list of CPU/device/firmware/OS.
+Each section describes a different set of combinations.
- The format is:
+* Intel(R) platforms with Mellanox(R) NICs combinations
- #. Platform name.
+ * Platform details
- * Platform details.
- * Platform details.
+ * Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz
+ * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+ * Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ * OS:
+ * CentOS 7.0
+ * Fedora 23
+ * Fedora 24
+ * FreeBSD 10.3
+ * Red Hat Enterprise Linux 7.2
+ * SUSE Enterprise Linux 12
+ * Ubuntu 14.04 LTS
+ * Ubuntu 15.10
+ * Ubuntu 16.04 LTS
+ * Wind River Linux 8
-Tested NICs
------------
+ * MLNX_OFED: 4.0-1.0.1.0
-.. This section should contain a list of NICs that were tested with this release.
+ * NICs:
- The format is:
+ * Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2x40G)
- #. NIC name.
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1007
+ * Firmware version: 2.40.5030
- * NIC details.
- * NIC details.
+ * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+ * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
-Tested OSes
------------
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.18.1000
+
+ * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.18.1000
+
+ * Mellanox(R) ConnectX-5 Ex EN 100G MCX516A-CDAT (2x100G)
+
+ * Host interface: PCI Express 4.0 x16
+ * Device ID: 15b3:1019
+ * Firmware version: 16.18.1000
+
+* IBM(R) Power8(R) with Mellanox(R) NICs combinations
+
+ * Machine:
+
+ * Processor: POWER8E (raw), AltiVec supported
+
+ * type-model: 8247-22L
+ * Firmware FW810.21 (SV810_108)
+
+ * OS: Ubuntu 16.04 LTS PPC le
+
+ * MLNX_OFED: 4.0-1.0.1.0
+
+ * NICs:
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.18.1000
+
+ * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.18.1000
+
+ * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.18.1000
+
+* Intel(R) platforms with Intel(R) NICs combinations
+
+ * Platform details
+
+ * Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
+ * Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
+ * Intel(R) Xeon(R) CPU E5-4667 v3 @ 2.00GHz
+ * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+ * Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
+ * Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz
+ * Intel(R) Xeon(R) CPU E5-2658 v2 @ 2.40GHz
+
+ * OS:
+
+ * CentOS 7.2
+ * Fedora 25
+ * FreeBSD 11
+ * Red Hat Enterprise Linux Server release 7.3
+ * SUSE Enterprise Linux 12
+ * Wind River Linux 8
+ * Ubuntu 16.04
+ * Ubuntu 16.10
+
+ * NICs:
+
+ * Intel(R) 82599ES 10 Gigabit Ethernet Controller
+
+ * Firmware version: 0x61bf0001
+ * Device id (pf/vf): 8086:10fb / 8086:10ed
+ * Driver version: 4.0.1-k (ixgbe)
+
+ * Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T
+
+ * Firmware version: 0x800001cf
+ * Device id (pf/vf): 8086:15ad / 8086:15a8
+ * Driver version: 4.2.5 (ixgbe)
+
+ * Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G)
+
+ * Firmware version: 5.05
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 1.5.23 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter X710-DA2 (2x10G)
+
+ * Firmware version: 5.05
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 1.5.23 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter XL710-QDA1 (1x40G)
+
+ * Firmware version: 5.05
+ * Device id (pf/vf): 8086:1584 / 8086:154c
+ * Driver version: 1.5.23 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
+
+ * Firmware version: 5.05
+ * Device id (pf/vf): 8086:1583 / 8086:154c
+ * Driver version: 1.5.23 (i40e)
+
+ * Intel(R) Corporation I350 Gigabit Network Connection
-.. This section should contain a list of OSes that were tested with this release.
- The format is as follows, in alphabetical order:
-
- * CentOS 7.0
- * Fedora 23
- * Fedora 24
- * FreeBSD 10.3
- * Red Hat Enterprise Linux 7.2
- * SUSE Enterprise Linux 12
- * Ubuntu 15.10
- * Ubuntu 16.04 LTS
- * Wind River Linux 8
-
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ * Firmware version: 1.48, 0x800006e7
+ * Device id (pf/vf): 8086:1521 / 8086:1520
+ * Driver version: 5.2.13-k (igb)
git.droids-corp.org / dpdk.git / blobdiff