+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright 2017 The DPDK contributors
+
DPDK Release 17.08
==================
-.. **Read this first.**
-
- The text in the sections below explains how to update the release notes.
-
- Use proper spelling, capitalization and punctuation in all sections.
-
- Variable and config names should be quoted as fixed width text:
- ``LIKE_THIS``.
-
- Build the docs and view the output file to ensure the changes are correct::
-
- make doc-guides-html
-
- xdg-open build/doc/html/guides/rel_notes/release_17_08.html
-
-
New Features
------------
-.. This section should contain new features added in this release. Sample
- format:
-
- * **Add a title in the past tense with a full stop.**
-
- Add a short 1-2 sentence description in the past tense. The description
- should be enough to allow someone scanning the release notes to
- understand the new feature.
-
- If the feature adds a lot of sub-features you can use a bullet list like
- this:
-
- * Added feature foo to do something.
- * Enhanced feature bar to do something else.
-
- Refer to the previous release notes for examples.
+* **Increase minimum x86 ISA version to SSE4.2.**
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ Starting with version 17.08, DPDK requires SSE4.2 to run on x86.
+ Previous versions required SSE3.
* **Added Service Core functionality.**
The service core functionality added to EAL allows DPDK to run services such
- as SW PMDs on lcores without the application manually running them. The
+ as software PMDs on lcores without the application manually running them. The
service core infrastructure allows flexibility of running multiple services
on the same service lcore, and provides the application with powerful APIs to
configure the mapping from service lcores to services.
* **Added Generic Receive Offload API.**
- Generic Receive Offload (GRO) API supports to reassemble TCP/IPv4
- packets. GRO API assumes all inputted packets are with correct
+ Added Generic Receive Offload (GRO) API support to reassemble TCP/IPv4
+ packets. The GRO API assumes all input packets have the correct
checksums. GRO API doesn't update checksums for merged packets. If
- inputted packets are IP fragmented, GRO API assumes they are complete
+ input packets are IP fragmented, the GRO API assumes they are complete
packets (i.e. with L4 headers).
-* **Added support for generic flow API (rte_flow) on igb NIC.**
+* **Added Fail-Safe PMD**
- This API provides a generic means to configure hardware to match specific
- ingress or egress traffic, alter its behavior and query related counters
+ Added the new Fail-Safe PMD. This virtual device allows applications to
+ support seamless hotplug of devices.
+ See the :doc:`/nics/fail_safe` guide for more details about this driver.
+
+* **Added support for generic flow API (rte_flow) on igb NICs.**
+
+ This API provides a generic means of configuring hardware to match specific
+ ingress or egress traffic, altering its behavior and querying related counters
according to any number of user-defined rules.
- * Generic flow API support for Ethernet, IPv4, UDP, TCP and
- RAW pattern items with QUEUE actions. There are four
- type of filter support for this feature on igb.
+ Added generic flow API support for Ethernet, IPv4, UDP, TCP and RAW pattern
+ items with QUEUE actions. There are four types of filter support for this
+ feature on igb.
-* **Added Generic Flow API support to enic.**
+* **Added support for generic flow API (rte_flow) on enic.**
- Flow API support for outer Ethernet, VLAN, IPv4, IPv6, UDP, TCP, SCTP, VxLAN
- and inner Ethernet, VLAN, IPv4, IPv6, UDP and TCP pattern items with QUEUE,
- MARK, FLAG and VOID actions for ingress traffic.
+ Added flow API support for outer Ethernet, VLAN, IPv4, IPv6, UDP, TCP, SCTP,
+ VxLAN and inner Ethernet, VLAN, IPv4, IPv6, UDP and TCP pattern items with
+ QUEUE, MARK, FLAG and VOID actions for ingress traffic.
* **Added support for Chelsio T6 family of adapters**
- CXGBE PMD updated to run Chelsio T6 family of adapters.
+ The CXGBE PMD was updated to run Chelsio T6 family of adapters.
* **Added latency and performance improvements for cxgbe**
- TX and RX path reworked to improve performance. Also reduced latency
- for slow traffic.
+ the Tx and Rx path in cxgbe were reworked to improve performance. In
+ addition the latency was reduced for slow traffic.
-* **Updated bnxt PMD.**
+* **Updated the bnxt PMD.**
+
+ Updated the bnxt PMD. The major enhancements include:
- Major enhancements include:
* Support MTU modification.
- * Support LRO.
- * Support VLAN filter and strip functionality.
- * Other enhancements to add support for more dev_ops.
- * Add PMD specific APIs mainly to control VF from PF.
+ * Add support for LRO.
+ * Add support for VLAN filter and strip functionality.
+ * Additional enhancements to add support for more dev_ops.
+ * Added PMD specific APIs mainly to control VF from PF.
* Update HWRM version to 1.7.7
* **Added support for Rx interrupts on mlx4 driver.**
- Rx queues can be armed with an interrupt which will trigger on the
+ Rx queues can be now be armed with an interrupt which will trigger on the
next packet arrival.
+* **Updated mlx5 driver.**
+
+ Updated the mlx5 driver including the following changes:
+
+ * Added vectorized Rx/Tx burst for x86.
+ * Added support for isolated mode from flow API.
+ * Reworked the flow drop action to implement in hardware classifier.
+ * Improved Rx interrupts management.
+
* **Updated szedata2 PMD.**
- Added support for firmwares with multiple Ethernet ports per physical port.
+ Added support for firmware with multiple Ethernet ports per physical port.
+
+* **Updated dpaa2 PMD.**
+
+ Updated dpaa2 PMD. Major enhancements include:
+
+ * Added support for MAC Filter configuration.
+ * Added support for Segmented Buffers.
+ * Added support for VLAN filter and strip functionality.
+ * Additional enhancements to add support for more dev_ops.
+ * Optimized the packet receive path
* **Reorganized the symmetric crypto operation structure.**
The crypto operation (``rte_crypto_sym_op``) has been reorganized as follows:
- * Removed field ``rte_crypto_sym_op_sess_type``.
- * Replaced pointer and physical address of IV with offset from the start
+ * Removed the ``rte_crypto_sym_op_sess_type`` field.
+ * Replaced the pointer and physical address of IV with offset from the start
of the crypto operation.
* Moved length and offset of cipher IV to ``rte_crypto_cipher_xform``.
- * Removed Additional Authentication Data (AAD) length.
+ * Removed "Additional Authentication Data" (AAD) length.
* Removed digest length.
* Removed AAD pointer and physical address from ``auth`` structure.
* Added ``aead`` structure, containing parameters for AEAD algorithms.
The crypto operation (``rte_crypto_op``) has been reorganized as follows:
- * Added field ``rte_crypto_op_sess_type``.
- * Enumerations ``rte_crypto_op_status`` and ``rte_crypto_op_type``
- have been modified to be uint8_t values.
+ * Added the ``rte_crypto_op_sess_type`` field.
+ * The enumerations ``rte_crypto_op_status`` and ``rte_crypto_op_type``
+ have been modified to be ``uint8_t`` values.
* Removed the field ``opaque_data``.
* Pointer to ``rte_crypto_sym_op`` has been replaced with a zero length array.
The crypto symmetric session structure (``rte_cryptodev_sym_session``) has
been reorganized as follows:
- * ``dev_id`` field has been removed.
- * ``driver_id`` field has been removed.
- * Mempool pointer ``mp`` has been removed.
+ * The ``dev_id`` field has been removed.
+ * The ``driver_id`` field has been removed.
+ * The mempool pointer ``mp`` has been removed.
* Replaced ``private`` marker with array of pointers to private data sessions
``sess_private_data``.
* Added support for multi-device sessions, so a single session can be
used in multiple drivers.
* Added functions to initialize and free individual driver private data
- with a same session.
+ with the same session.
* **Updated dpaa2_sec crypto PMD.**
- Added support for AES-GCM and AES-CTR
+ Added support for AES-GCM and AES-CTR.
* **Updated the AESNI MB PMD.**
The AESNI MB PMD has been updated with additional support for:
- * 12-byte IV on AES Counter Mode, apart from the previous 16-byte IV.
+ * 12-byte IV on AES Counter Mode, apart from the previous 16-byte IV.
* **Updated the AES-NI GCM PMD.**
The AES-NI GCM PMD was migrated from the ISA-L library to the Multi Buffer
library, as the latter library has Scatter Gather List support
- now. The migration entailed adding additional support for:
-
- * 192-bit key.
+ now. The migration entailed adding additional support for 192-bit keys.
* **Updated the Cryptodev Scheduler PMD.**
Added a multicore based distribution mode, which distributes the enqueued
crypto operations among several slaves, running on different logical cores.
+* **Added NXP DPAA2 Eventdev PMD.**
+
+ Added the new dpaa2 eventdev driver for NXP DPAA2 devices. See the
+ "Event Device Drivers" document for more details on this new driver.
+
* **Added dpdk-test-eventdev test application.**
The dpdk-test-eventdev tool is a Data Plane Development Kit (DPDK) application
eventdev devices.
-Resolved Issues
----------------
-
-.. This section should contain bug fixes added to the relevant
- sections. Sample format:
-
- * **code/section Fixed issue in the past tense with a full stop.**
-
- Add a short 1-2 sentence description of the resolved issue in the past
- tense.
-
- The title should contain the code/lib section like a commit message.
-
- Add the entries in alphabetic order in the relevant sections below.
-
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
-
-
-EAL
-~~~
-
-
-Drivers
-~~~~~~~
-
-
-Libraries
-~~~~~~~~~
-
-
-Examples
-~~~~~~~~
-
-
-Other
-~~~~~
-
-
Known Issues
------------
-.. This section should contain new known issues in this release. Sample format:
-
- * **Add title in present tense with full stop.**
-
- Add a short 1-2 sentence description of the known issue in the present
- tense. Add information on any known workarounds.
-
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+* **Starting with version 17.08, libnuma is required to build DPDK.**
API Changes
-----------
-.. This section should contain API changes. Sample format:
-
- * Add a short 1-2 sentence description of the API change. Use fixed width
- quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past
- tense.
+* **Modified the _rte_eth_dev_callback_process function in the ethdev library.**
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ The function ``_rte_eth_dev_callback_process()`` has been modified. The
+ return value has been changed from void to int and an extra parameter ``void
+ *ret_param`` has been added.
* **Moved bypass functions from the rte_ethdev library to ixgbe PMD**
* The following rte_ethdev library functions were removed:
- * ``rte_eth_dev_bypass_event_show``
- * ``rte_eth_dev_bypass_event_store``
- * ``rte_eth_dev_bypass_init``
- * ``rte_eth_dev_bypass_state_set``
- * ``rte_eth_dev_bypass_state_show``
- * ``rte_eth_dev_bypass_ver_show``
- * ``rte_eth_dev_bypass_wd_reset``
- * ``rte_eth_dev_bypass_wd_timeout_show``
- * ``rte_eth_dev_wd_timeout_store``
+ * ``rte_eth_dev_bypass_event_show()``
+ * ``rte_eth_dev_bypass_event_store()``
+ * ``rte_eth_dev_bypass_init()``
+ * ``rte_eth_dev_bypass_state_set()``
+ * ``rte_eth_dev_bypass_state_show()``
+ * ``rte_eth_dev_bypass_ver_show()``
+ * ``rte_eth_dev_bypass_wd_reset()``
+ * ``rte_eth_dev_bypass_wd_timeout_show()``
+ * ``rte_eth_dev_wd_timeout_store()``
* The following ixgbe PMD functions were added:
- * ``rte_pmd_ixgbe_bypass_event_show``
- * ``rte_pmd_ixgbe_bypass_event_store``
- * ``rte_pmd_ixgbe_bypass_init``
- * ``rte_pmd_ixgbe_bypass_state_set``
- * ``rte_pmd_ixgbe_bypass_state_show``
- * ``rte_pmd_ixgbe_bypass_ver_show``
- * ``rte_pmd_ixgbe_bypass_wd_reset``
- * ``rte_pmd_ixgbe_bypass_wd_timeout_show``
- * ``rte_pmd_ixgbe_bypass_wd_timeout_store``
+ * ``rte_pmd_ixgbe_bypass_event_show()``
+ * ``rte_pmd_ixgbe_bypass_event_store()``
+ * ``rte_pmd_ixgbe_bypass_init()``
+ * ``rte_pmd_ixgbe_bypass_state_set()``
+ * ``rte_pmd_ixgbe_bypass_state_show()``
+ * ``rte_pmd_ixgbe_bypass_ver_show()``
+ * ``rte_pmd_ixgbe_bypass_wd_reset()``
+ * ``rte_pmd_ixgbe_bypass_wd_timeout_show()``
+ * ``rte_pmd_ixgbe_bypass_wd_timeout_store()``
* **Reworked rte_cryptodev library.**
by the new function ``rte_crypto_count_by_driver()``.
* Moved crypto device driver names definitions to the particular PMDs.
These names are not public anymore.
- * ``rte_cryptodev_configure()`` does not create the session mempool
- for the device anymore.
- * ``rte_cryptodev_queue_pair_attach_sym_session()`` and
- ``rte_cryptodev_queue_pair_dettach_sym_session()`` functions require
+ * The ``rte_cryptodev_configure()`` function does not create the session
+ mempool for the device anymore.
+ * The ``rte_cryptodev_queue_pair_attach_sym_session()`` and
+ ``rte_cryptodev_queue_pair_detach_sym_session()`` functions require
the new parameter ``device id``.
- * Modified parameters of ``rte_cryptodev_sym_session_create()``, to accept
- ``mempool``, instead of ``device id`` and ``rte_crypto_sym_xform``.
- * Remove ``device id`` parameter from ``rte_cryptodev_sym_session_free()``.
- * Added new field ``session_pool`` to ``rte_cryptodev_queue_pair_setup()``.
- * Removed ``aad_size`` parameter from ``rte_cryptodev_sym_capability_check_auth()``.
- * Added ``iv_size`` parameter to ``rte_cryptodev_sym_capability_check_auth()``.
+ * Parameters of ``rte_cryptodev_sym_session_create()`` were modified to
+ accept ``mempool``, instead of ``device id`` and ``rte_crypto_sym_xform``.
+ * Removed ``device id`` parameter from ``rte_cryptodev_sym_session_free()``.
+ * Added a new field ``session_pool`` to ``rte_cryptodev_queue_pair_setup()``.
+ * Removed ``aad_size`` parameter from
+ ``rte_cryptodev_sym_capability_check_auth()``.
+ * Added ``iv_size`` parameter to
+ ``rte_cryptodev_sym_capability_check_auth()``.
+ * Removed ``RTE_CRYPTO_OP_STATUS_ENQUEUED`` from enum
+ ``rte_crypto_op_status``.
ABI Changes
-----------
-.. This section should contain ABI changes. Sample format:
+* Changed type of ``domain`` field in ``rte_pci_addr`` to ``uint32_t``
+ to follow the PCI standard.
- * Add a short 1-2 sentence description of the ABI change that was announced
- in the previous releases and made in this release. Use fixed width quotes
- for ``rte_function_names`` or ``rte_struct_names``. Use the past tense.
+* Added new ``rte_bus`` experimental APIs available as operators within the
+ ``rte_bus`` structure.
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+* Made ``rte_devargs`` structure internal device representation generic to
+ prepare for a bus-agnostic EAL.
* **Reorganized the crypto operation structures.**
- Some fields have been modified in the ``rte_crypto_op`` and ``rte_crypto_sym_op``
- structures, as described in the `New Features`_ section.
+ Some fields have been modified in the ``rte_crypto_op`` and
+ ``rte_crypto_sym_op`` structures, as described in the `New Features`_
+ section.
* **Reorganized the crypto symmetric session structure.**
Some fields have been modified in the ``rte_cryptodev_sym_session``
structure, as described in the `New Features`_ section.
-* **Reorganized the ``rte_crypto_sym_cipher_xform`` structure.**
+* **Reorganized the rte_crypto_sym_cipher_xform structure.**
* Added cipher IV length and offset parameters.
+ * Changed field size of key length from ``size_t`` to ``uint16_t``.
-* **Reorganized the ``rte_crypto_sym_auth_xform`` structure.**
+* **Reorganized the rte_crypto_sym_auth_xform structure.**
* Added authentication IV length and offset parameters.
- * Changed field size of AAD length from uint32_t to uint16_t.
- * Changed field size of digest length from uint32_t to uint16_t.
+ * Changed field size of AAD length from ``uint32_t`` to ``uint16_t``.
+ * Changed field size of digest length from ``uint32_t`` to ``uint16_t``.
* Removed AAD length.
+ * Changed field size of key length from ``size_t`` to ``uint16_t``.
-* Replaced ``dev_type`` enumeration with uint8_t ``driver_id`` in
+* Replaced ``dev_type`` enumeration with ``uint8_t`` ``driver_id`` in
``rte_cryptodev_info`` and ``rte_cryptodev`` structures.
* Removed ``session_mp`` from ``rte_cryptodev_config``.
Shared Library Versions
-----------------------
-.. Update any library version updated in this release and prepend with a ``+``
- sign, like this:
-
- librte_acl.so.2
- + librte_cfgfile.so.2
- librte_cmdline.so.2
-
- This section is a comment. do not overwrite or remove it.
- =========================================================
-
-
The libraries prepended with a plus sign were incremented in this version.
.. code-block:: diff
librte_cmdline.so.2
+ librte_cryptodev.so.3
librte_distributor.so.1
- librte_eal.so.4
- librte_ethdev.so.6
+ + librte_eal.so.5
+ + librte_ethdev.so.7
+ + librte_eventdev.so.2
+ librte_gro.so.1
librte_hash.so.2
librte_ip_frag.so.1
Tested Platforms
----------------
-.. This section should contain a list of platforms that were tested with this
- release.
+* Intel(R) platforms with Mellanox(R) NICs combinations
+
+ * Platform details:
+
+ * Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz
+ * Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
+ * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+ * Intel(R) Xeon(R) CPU E5-2640 @ 2.50GHz
+
+ * OS:
+
+ * Red Hat Enterprise Linux Server release 7.3 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.2 (Maipo)
+ * Ubuntu 16.10
+ * Ubuntu 16.04
+ * Ubuntu 14.04
+
+ * MLNX_OFED: 4.1-1.0.2.0
+
+ * NICs:
+
+ * Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1007
+ * Firmware version: 2.40.5030
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT
+ (2x50G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.18.2000
+
+ * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.19.1200
+
+ * Mellanox(R) ConnectX-5 Ex EN 100G MCX516A-CDAT (2x100G)
+
+ * Host interface: PCI Express 4.0 x16
+ * Device ID: 15b3:1019
+ * Firmware version: 16.19.1200
+
+* Intel(R) platforms with Intel(R) NICs combinations
+
+ * CPU
+
+ * Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
+ * Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
+ * Intel(R) Xeon(R) CPU D-1541 @ 2.10GHz
+ * Intel(R) Xeon(R) CPU E5-4667 v3 @ 2.00GHz
+ * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+ * Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
+ * Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz
+ * Intel(R) Xeon(R) CPU E5-2658 v2 @ 2.40GHz
+ * Intel(R) Xeon(R) CPU E5-2658 v3 @ 2.20GHz
+
+ * OS:
+
+ * CentOS 7.2
+ * Fedora 25
+ * FreeBSD 11
+ * Red Hat Enterprise Linux Server release 7.3
+ * SUSE Enterprise Linux 12
+ * Wind River Linux 8
+ * Ubuntu 16.04
+ * Ubuntu 16.10
+
+ * NICs:
+
+ * Intel(R) 82599ES 10 Gigabit Ethernet Controller
+
+ * Firmware version: 0x61bf0001
+ * Device id (pf/vf): 8086:10fb / 8086:10ed
+ * Driver version: 4.0.1-k (ixgbe)
+
+ * Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T
+
+ * Firmware version: 0x800001cf
+ * Device id (pf/vf): 8086:15ad / 8086:15a8
+ * Driver version: 4.2.5 (ixgbe)
+
+ * Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G)
+
+ * Firmware version: 6.01 0x80003205
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 2.0.19 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter X710-DA2 (2x10G)
+
+ * Firmware version: 6.01 0x80003204
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 2.0.19 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter XXV710-DA2 (2x25G)
+
+ * Firmware version: 6.01 0x80003221
+ * Device id (pf/vf): 8086:158b
+ * Driver version: 2.0.19 (i40e)
- The format is:
+ * Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
- * <vendor> platform with <vendor> <type of devices> combinations
+ * Firmware version: 6.01 0x8000321c
+ * Device id (pf/vf): 8086:1583 / 8086:154c
+ * Driver version: 2.0.19 (i40e)
- * List of CPU
- * List of OS
- * List of devices
- * Other relevant details...
+ * Intel(R) Corporation I350 Gigabit Network Connection
- This section is a comment. do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
+ * Firmware version: 1.48, 0x800006e7
+ * Device id (pf/vf): 8086:1521 / 8086:1520
+ * Driver version: 5.2.13-k (igb)