Also, make sure to start the actual text at the margin.
=========================================================
+* **Bumped minimal x86 ISA to SSE4.2.**
+
+ Starting with version 17.08, DPDK requires SSE4.2 to run on x86.
+ Previous versions required SSE3.
+
+* **Added Service Core functionality.**
+
+ The service core functionality added to EAL allows DPDK to run services such
+ as SW PMDs on lcores without the application manually running them. The
+ service core infrastructure allows flexibility of running multiple services
+ on the same service lcore, and provides the application with powerful APIs to
+ configure the mapping from service lcores to services.
+
+* **Added Generic Receive Offload API.**
+
+ Generic Receive Offload (GRO) API supports to reassemble TCP/IPv4
+ packets. GRO API assumes all inputted packets are with correct
+ checksums. GRO API doesn't update checksums for merged packets. If
+ inputted packets are IP fragmented, GRO API assumes they are complete
+ packets (i.e. with L4 headers).
+
* **Added support for generic flow API (rte_flow) on igb NIC.**
This API provides a generic means to configure hardware to match specific
Rx queues can be armed with an interrupt which will trigger on the
next packet arrival.
+* **Updated mlx5 driver.**
+
+ Updated the mlx5 driver, include the following changes:
+
+ * Added vectorized Rx/Tx burst for x86.
+ * Added support for isolated mode from flow API.
+ * Re-worked flow drop action to implement in hardware classifier.
+ * Improved Rx interrupts management.
+
* **Updated szedata2 PMD.**
Added support for firmwares with multiple Ethernet ports per physical port.
+* **Updated dpaa2 PMD.**
+
+ Major enhancements include:
+ * Support MAC Filter configuration
+ * Support Segmented Buffers
+ * Support VLAN filter and strip functionality.
+ * Other enhancements to add support for more dev_ops.
+ * Optimized the packet receive path
+
* **Reorganized the symmetric crypto operation structure.**
The crypto operation (``rte_crypto_sym_op``) has been reorganized as follows:
Added a multicore based distribution mode, which distributes the enqueued
crypto operations among several slaves, running on different logical cores.
+* **Added NXP DPAA2 Eventdev PMD.**
+
+ Added the new dpaa2 eventdev driver for NXP DPAA2 devices. See the
+ "Event Device Drivers" document for more details on this new driver.
+
+* **Added dpdk-test-eventdev test application.**
+
+ The dpdk-test-eventdev tool is a Data Plane Development Kit (DPDK) application
+ that allows exercising various eventdev use cases.
+ This application has a generic framework to add new eventdev based test cases
+ to verify functionality and measure the performance parameters of DPDK
+ eventdev devices.
+
Resolved Issues
---------------
Also, make sure to start the actual text at the margin.
=========================================================
+* **Modified the _rte_eth_dev_callback_process function in the ethdev library.**
+
+ The function ``_rte_eth_dev_callback_process()`` has been modified. The return
+ value has been changed from void to int and an extra parameter ``void *ret_param``
+ has been added.
+
+* **Moved bypass functions from the rte_ethdev library to ixgbe PMD**
+
+ * The following rte_ethdev library functions were removed:
+
+ * ``rte_eth_dev_bypass_event_show``
+ * ``rte_eth_dev_bypass_event_store``
+ * ``rte_eth_dev_bypass_init``
+ * ``rte_eth_dev_bypass_state_set``
+ * ``rte_eth_dev_bypass_state_show``
+ * ``rte_eth_dev_bypass_ver_show``
+ * ``rte_eth_dev_bypass_wd_reset``
+ * ``rte_eth_dev_bypass_wd_timeout_show``
+ * ``rte_eth_dev_wd_timeout_store``
+
+ * The following ixgbe PMD functions were added:
+
+ * ``rte_pmd_ixgbe_bypass_event_show``
+ * ``rte_pmd_ixgbe_bypass_event_store``
+ * ``rte_pmd_ixgbe_bypass_init``
+ * ``rte_pmd_ixgbe_bypass_state_set``
+ * ``rte_pmd_ixgbe_bypass_state_show``
+ * ``rte_pmd_ixgbe_bypass_ver_show``
+ * ``rte_pmd_ixgbe_bypass_wd_reset``
+ * ``rte_pmd_ixgbe_bypass_wd_timeout_show``
+ * ``rte_pmd_ixgbe_bypass_wd_timeout_store``
+
* **Reworked rte_cryptodev library.**
The rte_cryptodev library has been reworked and updated. The following changes
* Modified parameters of ``rte_cryptodev_sym_session_create()``, to accept
``mempool``, instead of ``device id`` and ``rte_crypto_sym_xform``.
* Remove ``device id`` parameter from ``rte_cryptodev_sym_session_free()``.
+ * Added new field ``session_pool`` to ``rte_cryptodev_queue_pair_setup()``.
+ * Removed ``aad_size`` parameter from ``rte_cryptodev_sym_capability_check_auth()``.
+ * Added ``iv_size`` parameter to ``rte_cryptodev_sym_capability_check_auth()``.
+ * Removed ``RTE_CRYPTO_OP_STATUS_ENQUEUED`` from enum ``rte_crypto_op_status``.
ABI Changes
* **Reorganized the ``rte_crypto_sym_cipher_xform`` structure.**
* Added cipher IV length and offset parameters.
+ * Changed field size of key length from size_t to uint16_t.
* **Reorganized the ``rte_crypto_sym_auth_xform`` structure.**
* Changed field size of AAD length from uint32_t to uint16_t.
* Changed field size of digest length from uint32_t to uint16_t.
* Removed AAD length.
+ * Changed field size of key length from size_t to uint16_t.
* Replaced ``dev_type`` enumeration with uint8_t ``driver_id`` in
``rte_cryptodev_info`` and ``rte_cryptodev`` structures.
+ librte_cryptodev.so.3
librte_distributor.so.1
librte_eal.so.4
- librte_ethdev.so.6
+ + librte_ethdev.so.7
+ + librte_gro.so.1
librte_hash.so.2
librte_ip_frag.so.1
librte_jobstats.so.1
This section is a comment. do not overwrite or remove it.
Also, make sure to start the actual text at the margin.
=========================================================
+
+* Intel(R) platforms with Mellanox(R) NICs combinations
+
+ * Platform details:
+
+ * Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz
+ * Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
+ * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+ * Intel(R) Xeon(R) CPU E5-2640 @ 2.50GHz
+
+ * OS:
+
+ * Red Hat Enterprise Linux Server release 7.3 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.2 (Maipo)
+ * Ubuntu 16.10
+ * Ubuntu 16.04
+ * Ubuntu 14.04
+
+ * MLNX_OFED: 4.1-1.0.2.0
+
+ * NICs:
+
+ * Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1007
+ * Firmware version: 2.40.5030
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.18.2000
+
+ * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.19.1200
+
+ * Mellanox(R) ConnectX-5 Ex EN 100G MCX516A-CDAT (2x100G)
+
+ * Host interface: PCI Express 4.0 x16
+ * Device ID: 15b3:1019
+ * Firmware version: 16.19.1200