+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright 2018 The DPDK contributors
+
DPDK Release 18.08
==================
Flow API support has been added to CXGBE Poll Mode Driver to offload
flows to Chelsio T5/T6 NICs. Support added for:
+
* Wildcard (LE-TCAM) and Exact (HASH) match filters.
* Match items: physical ingress port, IPv4, IPv6, TCP and UDP.
* Action items: queue, drop, count, and physical egress port redirect.
* **Added descriptor status check support for fm10k.**
- ``rte_eth_rx_descritpr_status`` and ``rte_eth_tx_descriptor_status``
- are supported by fm10K.
+ The ``rte_eth_rx_descriptor_status`` and ``rte_eth_tx_descriptor_status``
+ APIs are now supported by fm10K.
* **Updated the enic driver.**
* Added port representors support.
* Added Flow API support for e-switch rules.
- Supported ACTION_PORT_ID, ACTION_DROP, ACTION_OF_POP_VLAN,
+ Added support for ACTION_PORT_ID, ACTION_DROP, ACTION_OF_POP_VLAN,
ACTION_OF_PUSH_VLAN, ACTION_OF_SET_VLAN_VID, ACTION_OF_SET_VLAN_PCP
and ITEM_PORT_ID.
- * Supported 32-bit compilation.
+ * Added support for 32-bit compilation.
-* **Added TSO support for mlx4 driver.**
+* **Added TSO support for the mlx4 driver.**
- The support is from MLNX_OFED_4.4 and above.
+ Added TSO support for the mlx4 drivers from MLNX_OFED_4.4 and above.
* **SoftNIC PMD rework.**
- The SoftNIC PMD infrastructure is restructured to use the Packet Framework,
- which makes it more flexible, modular and easier to add new functionality
- in future.
+ The SoftNIC PMD infrastructure has been restructured to use the Packet
+ Framework, which makes it more flexible, modular and easier to add new
+ functionality in the future.
* **Updated the AESNI MB PMD.**
Also, make sure to start the actual text at the margin.
=========================================================
-* Path to runtime config file has changed. The new path is determined as
- follows:
+* The path to the runtime config file has changed. The new path is determined
+ as follows:
- If DPDK is running as root, ``/var/run/dpdk/<prefix>/config``
- If DPDK is not running as root:
* If ``$XDG_RUNTIME_DIR`` is set, ``${XDG_RUNTIME_DIR}/dpdk/<prefix>/config``
* Otherwise, ``/tmp/dpdk/<prefix>/config``
+* eal: The function ``rte_eal_mbuf_default_mempool_ops`` was deprecated
+ and is removed in 18.08. It shall be replaced by
+ ``rte_mbuf_best_mempool_ops``.
+
* mempool: Following functions were deprecated and are removed in 18.08:
- ``rte_mempool_populate_iova_tab``
- ``rte_eth_conf.rxmode.ignore_offload_bitfield``
- ``ETH_TXQ_FLAGS_IGNORE``
-* cryptodev: In struct ``struct rte_cryptodev_info``, field ``rte_pci_device *pci_dev``
- has been replaced with field ``struct rte_device *device``.
- Value 0 is accepted in ``sym.max_nb_sessions``, meaning that a device
- supports an unlimited number of sessions.
- Two new fields of type ``uint16_t`` have been added:
- ``min_mbuf_headroom_req`` and ``min_mbuf_tailroom_req``.
- These parameters specify the recommended headroom and tailroom for mbufs
- to be processed by the PMD.
+* cryptodev: The following API changes have been made in 18.08:
+
+ - In struct ``struct rte_cryptodev_info``, field ``rte_pci_device *pci_dev``
+ has been replaced with field ``struct rte_device *device``.
+ - Value 0 is accepted in ``sym.max_nb_sessions``, meaning that a device
+ supports an unlimited number of sessions.
+ - Two new fields of type ``uint16_t`` have been added:
+ ``min_mbuf_headroom_req`` and ``min_mbuf_tailroom_req``. These parameters
+ specify the recommended headroom and tailroom for mbufs to be processed by
+ the PMD.
-* cryptodev: Following functions were deprecated and are removed in 18.08:
+* cryptodev: The following functions were deprecated and are removed in 18.08:
- ``rte_cryptodev_queue_pair_start``
- ``rte_cryptodev_queue_pair_stop``
- ``rte_cryptodev_queue_pair_attach_sym_session``
- ``rte_cryptodev_queue_pair_detach_sym_session``
-* cryptodev: Following functions were deprecated and are replaced by
- other functions in 18.08:
+* cryptodev: The following functions were deprecated and are replaced by other
+ functions in 18.08:
- ``rte_cryptodev_get_header_session_size`` is replaced with
``rte_cryptodev_sym_get_header_session_size``
- ``RTE_COMP_FF_OOP_LB_IN_SGL_OUT``
-ABI Changes
------------
-
-.. This section should contain ABI changes. Sample format:
-
- * Add a short 1-2 sentence description of the ABI change
- that was announced in the previous releases and made in this release.
- Use fixed width quotes for ``function_names`` or ``struct_names``.
- Use the past tense.
-
- This section is a comment. Do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
-
-
-Removed Items
--------------
-
-.. This section should contain removed items in this release. Sample format:
-
- * Add a short 1-2 sentence description of the removed item
- in the past tense.
-
- This section is a comment. Do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
-
-
Shared Library Versions
-----------------------
librte_compressdev.so.1
+ librte_cryptodev.so.5
librte_distributor.so.1
- librte_eal.so.7
+ + librte_eal.so.8
+ librte_ethdev.so.10
librte_eventdev.so.4
librte_flow_classify.so.1
librte_vhost.so.3
-Known Issues
-------------
-
-.. This section should contain new known issues in this release. Sample format:
-
- * **Add title in present tense with full stop.**
-
- Add a short 1-2 sentence description of the known issue
- in the present tense. Add information on any known workarounds.
-
- This section is a comment. Do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =========================================================
-
-
Tested Platforms
----------------
Also, make sure to start the actual text at the margin.
=========================================================
+* Intel(R) platforms with Intel(R) NICs combinations
+
+ * CPU
+
+ * Intel(R) Atom(TM) CPU C3858 @ 2.00GHz
+ * Intel(R) Xeon(R) CPU D-1541 @ 2.10GHz
+ * Intel(R) Xeon(R) CPU E5-4667 v3 @ 2.00GHz
+ * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+ * Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
+ * Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz
+ * Intel(R) Xeon(R) CPU E5-2658 v2 @ 2.40GHz
+ * Intel(R) Xeon(R) CPU E5-2658 v3 @ 2.20GHz
+ * Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz
+
+ * OS:
+
+ * CentOS 7.4
+ * Fedora 25
+ * Fedora 27
+ * Fedora 28
+ * FreeBSD 11.1
+ * Red Hat Enterprise Linux Server release 7.5
+ * SUSE Enterprise Linux 12
+ * Wind River Linux 8
+ * Ubuntu 14.04
+ * Ubuntu 16.04
+ * Ubuntu 16.10
+ * Ubuntu 17.10
+ * Ubuntu 18.04
+
+ * NICs:
+
+ * Intel(R) 82599ES 10 Gigabit Ethernet Controller
+
+ * Firmware version: 0x61bf0001
+ * Device id (pf/vf): 8086:10fb / 8086:10ed
+ * Driver version: 5.2.3 (ixgbe)
+
+ * Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T
+
+ * Firmware version: 0x800003e7
+ * Device id (pf/vf): 8086:15ad / 8086:15a8
+ * Driver version: 4.4.6 (ixgbe)
+
+ * Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G)
+
+ * Firmware version: 6.01 0x80003221
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 2.4.6 (i40e)
+
+ * Intel Corporation Ethernet Connection X722 for 10GbE SFP+ (4x10G)
+
+ * Firmware version: 3.33 0x80000fd5 0.0.0
+ * Device id (pf/vf): 8086:37d0 / 8086:37cd
+ * Driver version: 2.4.3 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter XXV710-DA2 (2x25G)
+
+ * Firmware version: 6.01 0x80003221
+ * Device id (pf/vf): 8086:158b / 8086:154c
+ * Driver version: 2.4.6 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
+
+ * Firmware version: 6.01 0x8000321c
+ * Device id (pf/vf): 8086:1583 / 8086:154c
+ * Driver version: 2.4.6 (i40e)
+
+ * Intel(R) Corporation I350 Gigabit Network Connection
+
+ * Firmware version: 1.63, 0x80000dda
+ * Device id (pf/vf): 8086:1521 / 8086:1520
+ * Driver version: 5.4.0-k (igb)
+
* Intel(R) platforms with Mellanox(R) NICs combinations
* CPU: