DPDK Release 21.05
==================
-.. **Read this first.**
-
- The text in the sections below explains how to update the release notes.
-
- Use proper spelling, capitalization and punctuation in all sections.
-
- Variable and config names should be quoted as fixed width text:
- ``LIKE_THIS``.
-
- Build the docs and view the output file to ensure the changes are correct::
-
- make doc-guides-html
- xdg-open build/doc/html/guides/rel_notes/release_21_05.html
-
-
New Features
------------
-.. This section should contain new features added in this release.
- Sample format:
+* **Added support for GCC 11 and clang 12.**
- * **Add a title in the past tense with a full stop.**
+ Added support for building with GCC 11.1.1 and clang 12.0.0.
- Add a short 1-2 sentence description in the past tense.
- The description should be enough to allow someone scanning
- the release notes to understand the new feature.
+* **Added support for Alpine Linux with musl libc.**
- If the feature adds a lot of sub-features you can use a bullet list
- like this:
-
- * Added feature foo to do something.
- * Enhanced feature bar to do something else.
-
- Refer to the previous release notes for examples.
-
- Suggested order in release notes items:
- * Core libs (EAL, mempool, ring, mbuf, buses)
- * Device abstraction libs and PMDs
- - ethdev (lib, PMDs)
- - cryptodev (lib, PMDs)
- - eventdev (lib, PMDs)
- - etc
- * Other libs
- * Apps, Examples, Tools (if significant)
-
- This section is a comment. Do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =======================================================
+ Added initial support for building DPDK, without modification,
+ on Alpine Linux using musl libc and busybox.
* **Added phase-fair lock.**
- Phase-fair lock provides fairness guarantees.
+ Added support for a Phase-fair lock. This provides fairness guarantees.
It has two ticket pools, one for readers and one for writers.
* **Added support for Marvell CN10K SoC drivers.**
- Added Marvell CN10K SoC support. Marvell CN10K SoC are based on Octeon 10
- family of ARM64 processors with ARM Neoverse N2 core with accelerators for
+ Added Marvell CN10K SoC support. Marvell CN10K SoCs are based on the Octeon 10
+ family of ARM64 processors with the ARM Neoverse N2 core with accelerators for
packet processing, timers, cryptography, etc.
- * Added common/cnxk driver consisting of common API to be used by
- net, crypto and event PMD's.
+ * Added common/cnxk driver consisting of a common API to be used by
+ net, crypto and event PMDs.
* Added mempool/cnxk driver which provides the support for the integrated
mempool device.
+ * Added event/cnxk driver which provides the support for the integrated event
+ device.
-* **Enhanced ethdev representor syntax.**
+* **Added enhanced ethdev representor syntax.**
* Introduced representor type of VF, SF and PF.
- * Supported sub-function and multi-host in representor syntax::
+ * Added support for sub-function and multi-host in representor syntax::
representor=# [0,2-4] /* Legacy VF compatible. */
representor=[[c#]pf#]vf# c1pf2vf3 /* VF 3 on PF 2 of controller 1. */
* **Added queue state in queried Rx/Tx queue info.**
- * Added new field ``queue_state`` to ``rte_eth_rxq_info`` structure to
- provide indicated Rx queue state.
- * Added new field ``queue_state`` to ``rte_eth_txq_info`` structure to
- provide indicated Tx queue state.
+ * Added new field ``queue_state`` to the ``rte_eth_rxq_info`` structure to
+ provide the indicated Rx queue state.
+ * Added new field ``queue_state`` to the ``rte_eth_txq_info`` structure to
+ provide the indicated Tx queue state.
+
+* **Updated meter API.**
+
+ * Added packet mode in the meter profile parameters data structures
+ to support metering traffic by packet per second (PPS),
+ in addition to the initial bytes per second (BPS) mode (value 0).
+ * Added support for pre-defined meter policy via flow action list per color.
+
+* **Added packet integrity match to flow rules.**
-* **Added support for meter PPS profile.**
+ * Added ``RTE_FLOW_ITEM_TYPE_INTEGRITY`` flow item.
+ * Added ``rte_flow_item_integrity`` data structure.
- Added packet mode in the meter profile parameters data structures
- to support metering traffic by packet per second (PPS),
- in addition to the initial bytes per second (BPS) mode (value 0).
+* **Added TCP connection tracking offload in flow API.**
+
+ * Added conntrack item and action for stateful connection offload.
+
+* **Updated Amazon ENA PMD.**
+
+ The new driver version (v2.3.0) introduced bug fixes and improvements,
+ including:
+
+ * Changed ``memcpy()`` mapping to the dpdk-optimized version.
+ * Updated ena_com (HAL) to the latest version.
+ * Added indication of the RSS hash presence in the mbuf.
* **Updated Arkville PMD driver.**
Updated the Intel iavf driver with new features and improvements, including:
- * Added flow filter to support GTPU inner L3/L4 fields matching.
+ * Added flow filter to support GTPU inner L3/L4 field matching.
* In AVX512 code, added the new RX and TX paths to use the HW offload
features. When the HW offload features are configured to be used, the
- offload paths are chosen automatically. In parallel the support of HW
+ offload paths are chosen automatically. In parallel the support for HW
offload features was removed from the legacy AVX512 paths.
* **Updated Intel ice driver.**
Updated the Mellanox mlx5 driver with new features and improvements, including:
+ * Added support for matching on packet integrity status.
* Added support for VXLAN and NVGRE encap as sample actions.
+ * Added support for flow COUNT action handle.
* Support push VLAN on ingress traffic and pop VLAN on egress traffic in E-Switch mode.
+ * Added support for pre-defined meter policy API.
+ * Added support for ASO (Advanced Steering Operation) meter.
+ * Added support for ASO metering by PPS (packet per second).
+ * Added support for the monitor policy of Power Management API.
+ * Added support for connection tracking.
+ * Added support for Sub-Function representors.
* **Updated NXP DPAA driver.**
* Added support for txgbevf PMD.
* Support device arguments to handle AN training for backplane NICs.
+ * Added support for VXLAN-GPE.
* **Enabled vmxnet3 PMD on Windows.**
+* **Enabled libpcap-based PMD on Windows.**
+
+ Enabled libpcap-based PMD support on Windows.
+ A libpcap distribution, such as Npcap or WinPcap, is required to run the PMD.
+
* **Updated the AF_XDP driver.**
* Added support for preferred busy polling.
-* **Added support of multiple data-units in cryptodev API.**
+* **Added support for vhost async packed ring data path.**
+
+ Added packed ring support for async vhost.
+
+* **Added support of multiple data-units in the cryptodev API.**
The cryptodev library has been enhanced to allow operations on multiple
- data-units for AES-XTS algorithm, the data-unit length should be set in the
+ data-units for the AES-XTS algorithm. The data-unit length should be set in the
transformation. A capability for it was added too.
* **Added a cryptodev feature flag to support cipher wrapped keys.**
- A new feature flag has been added to allow application to provide
+ A new feature flag has been added to allow applications to provide
cipher wrapped keys in session xforms.
* **Updated the OCTEON TX crypto PMD.**
- * Added support for DIGEST_ENCRYPTED mode in OCTEON TX crypto PMD.
+ * Added support for ``DIGEST_ENCRYPTED`` mode in the OCTEON TX crypto PMD.
* **Updated the OCTEON TX2 crypto PMD.**
- * Added support for DIGEST_ENCRYPTED mode in OCTEON TX2 crypto PMD.
+ * Added support for ``DIGEST_ENCRYPTED`` mode in OCTEON TX2 crypto PMD.
* Added support in lookaside protocol offload mode for IPsec with
UDP encapsulation support for NAT Traversal.
* Added support in lookaside protocol offload mode for IPsec with
IPv4 transport mode.
+* **Updated Intel QuickAssist compression PMD.**
+
+ * The compression is now available on all QAT GEN3 devices
+ that support it in hardware.
+
* **Updated Mellanox RegEx PMD.**
* Added support for multi-segments mbuf.
* **Added event device vector capability.**
- * Added ``rte_event_vector`` data structure which is capable of holding
+ * Added the ``rte_event_vector`` data structure which is capable of holding
multiple ``uintptr_t`` of the same flow thereby allowing applications
to vectorize their pipelines and also reduce the complexity of pipelining
the events across multiple stages.
* This also reduced the scheduling overhead on a event device.
+* **Enhanced crypto adapter forward mode.**
+
+ * Added ``rte_event_crypto_adapter_enqueue()`` API to enqueue events to the
+ crypto adapter if forward mode is supported by the driver.
+ * Added support for crypto adapter forward mode in octeontx2 event and crypto
+ device driver.
+
+* **Updated Intel DLB2 driver.**
+
+ * Added support for the DLB v2.5 device.
+
* **Added Predictable RSS functionality to the Toeplitz hash library.**
Added feature for finding collisions of the Toeplitz hash function -
* **Updated testpmd.**
- * Added a command line option to configure forced speed for Ethernet port.
- ``dpdk-testpmd -- --eth-link-speed N``
- * Added command to display Rx queue used descriptor count.
- ``show port (port_id) rxq (queue_id) desc used count``
- * Added command to dump internal representation information of single flow.
- ``flow dump (port_id) rule (rule_id)``
+ * Added a command line option to configure forced speed for an Ethernet port:
+ ``dpdk-testpmd -- --eth-link-speed N``.
+ * Added command to show link flow control info:
+ ``show port (port_id) flow_ctrl``.
+ * Added command to display Rx queue used descriptor count:
+ ``show port (port_id) rxq (queue_id) desc used count``.
+ * Added command to cleanup a Tx queue's mbuf on a port:
+ ``port cleanup (port_id) txq (queue_id) (free_cnt)``.
+ * Added command to dump internal representation information of a single flow:
+ ``flow dump (port_id) rule (rule_id)``.
+ * Added commands to create and delete meter policy:
+ ``add port meter policy (port_id) (policy_id) ...``.
+ * Added commands to construct conntrack context and relevant indirect
+ action handle creation, update for conntrack action as well as conntrack
+ item matching.
+ * Added commands for action meter color to color the packet to reflect
+ the meter color result:
+ ``color type (green|yellow|red)``.
* **Added support for the FIB lookup method in the l3fwd example app.**
- Previously the l3fwd sample app only supported LPM and EM lookup methods,
- the app now supports the Forwarding Information Base (FIB) lookup method.
+ Added support to the l3fwd application to support
+ the Forwarding Information Base (FIB) lookup method.
+ Previously l3fwd only supported the LPM and Exact Match lookup methods.
-* **Updated ipsec-secgw sample application.**
+* **Updated the ipsec-secgw sample application.**
* Updated the ``ipsec-secgw`` sample application with UDP encapsulation
support for NAT Traversal.
-* **Enhanced crypto adapter forward mode.**
+* **Added sub-testsuite support.**
- * Added ``rte_event_crypto_adapter_enqueue()`` API to enqueue events to crypto
- adapter if forward mode is supported by driver.
- * Added support for crypto adapter forward mode in octeontx2 event and crypto
- device driver.
+ * The unit test suite struct now supports having both a nested
+ list of sub-testsuites, and a list of testcases as before.
Removed Items
-------------
-.. This section should contain removed items in this release. Sample format:
-
- * Add a short 1-2 sentence description of the removed item
- in the past tense.
-
- This section is a comment. Do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =======================================================
-
* Removed support for Intel DLB V1 hardware. This is not a broad market device,
and existing customers already obtain the source code directly from Intel.
API Changes
-----------
-.. This section should contain API changes. Sample format:
-
- * sample: Add a short 1-2 sentence description of the API change
- which was announced in the previous releases and made in this release.
- Start with a scope label like "ethdev:".
- Use fixed width quotes for ``function_names`` or ``struct_names``.
- Use the past tense.
-
- This section is a comment. Do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =======================================================
-
* eal: The experimental TLS API added in ``rte_thread.h`` has been renamed
from ``rte_thread_tls_*`` to ``rte_thread_*`` to avoid naming redundancy
and confusion with the transport layer security term.
and can be replaced with ``RTE_PCI_ANY_ID``.
* ethdev: Added a ``rte_flow`` pointer parameter to the function
- ``rte_flow_dev_dump()`` allowing dump for single flow.
+ ``rte_flow_dev_dump()`` allowing dumping of a single flow.
* cryptodev: The experimental raw data path API for dequeue
``rte_cryptodev_raw_dequeue_burst`` got a new parameter
The action ``RTE_FLOW_ACTION_TYPE_SHARED`` is deprecated and can be
replaced with ``RTE_FLOW_ACTION_TYPE_INDIRECT``.
+* ethdev: The experimental function ``rte_mtr_policer_actions_update()``,
+ the enum ``rte_mtr_policer_action``, and the struct members
+ ``policer_action_recolor_supported`` and ``policer_action_drop_supported``
+ have been removed.
-ABI Changes
------------
+* vhost: The vhost library currently populates received mbufs from a virtio
+ driver with Tx offload flags while not filling Rx offload flags.
+ While this behavior is arguable, it is kept untouched.
+ A new flag ``RTE_VHOST_USER_NET_COMPLIANT_OL_FLAGS`` has been added to ask
+ for a behavior compliant with the mbuf offload API.
-.. This section should contain ABI changes. Sample format:
+* stack: Lock-free ``rte_stack`` no longer silently ignores push and pop when
+ it's not supported on the current platform. Instead ``rte_stack_create()``
+ fails and ``rte_errno`` is set to ``ENOTSUP``.
- * sample: Add a short 1-2 sentence description of the ABI change
- which was announced in the previous releases and made in this release.
- Start with a scope label like "ethdev:".
- Use fixed width quotes for ``function_names`` or ``struct_names``.
- Use the past tense.
+* raw/ioat: The experimental function ``rte_ioat_completed_ops()`` now
+ supports two additional parameters, ``status`` and ``num_unsuccessful``,
+ to allow the reporting of errors from hardware when performing copy
+ operations.
- This section is a comment. Do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =======================================================
+
+ABI Changes
+-----------
* No ABI change that would break compatibility with 20.11.
and was not for use by external applications.
-Known Issues
-------------
+Tested Platforms
+----------------
-.. This section should contain new known issues in this release. Sample format:
+* Intel\ |reg| platforms with Intel\ |reg| NICs combinations
- * **Add title in present tense with full stop.**
+ * CPU
- Add a short 1-2 sentence description of the known issue
- in the present tense. Add information on any known workarounds.
+ * Intel\ |reg| Atom\ |trade| CPU C3758 @ 2.20GHz
+ * Intel\ |reg| Atom\ |trade| CPU C3958 @ 2.00GHz
+ * Intel\ |reg| Xeon\ |reg| CPU D-1541 @ 2.10GHz
+ * Intel\ |reg| Xeon\ |reg| CPU D-1553N @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2680 v2 @ 2.80GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2699 v3 @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2699 v4 @ 2.20GHz
+ * Intel\ |reg| Xeon\ |reg| Gold 6140M CPU @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| Gold 6139 CPU @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| Gold 6252N CPU @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| Platinum 8180 CPU @ 2.50GHz
+ * Intel\ |reg| Xeon\ |reg| Platinum 8280M CPU @ 2.70GHz
- This section is a comment. Do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =======================================================
+ * OS:
+ * CentOS 8.3
+ * CentOS Stream 8
+ * Fedora 33
+ * FreeBSD 12.1
+ * OpenWRT 19.07.4
+ * Red Hat Enterprise Linux Server release 8.3
+ * Suse 15 SP2
+ * Ubuntu 20.04
+ * Ubuntu 21.04
-Tested Platforms
-----------------
+ * NICs:
+
+ * Intel\ |reg| Ethernet Controller E810-C for SFP (4x25G)
+
+ * Firmware version: 3.00
+ * Device id (pf/vf): 8086:1593 / 8086:1889
+ * Driver version: 1.6.0 (ice)
+ * OS Default DDP: 1.3.26.0
+ * COMMS DDP: 1.3.30.0
+ * Wireless Edge DDP: 1.3.6.0
+
+ * Intel\ |reg| Ethernet Controller E810-C for QSFP (2x100G)
+
+ * Firmware version: 3.00
+ * Device id (pf/vf): 8086:1592 / 8086:1889
+ * Driver version: 1.6.0 (ice)
+ * OS Default DDP: 1.3.26.0
+ * COMMS DDP: 1.3.30.0
+ * Wireless Edge DDP: 1.3.6.0
+
+ * Intel\ |reg| 82599ES 10 Gigabit Ethernet Controller
+
+ * Firmware version: 0x61bf0001
+ * Device id (pf/vf): 8086:10fb / 8086:10ed
+ * Driver version: 5.1.0-k (ixgbe)
+
+ * Intel\ |reg| Corporation Ethernet Connection X552/X557-AT 10GBASE-T
+
+ * Firmware version: 0x800003e7
+ * Device id (pf/vf): 8086:15ad / 8086:15a8
+ * Driver version: 5.1.0-k (ixgbe)
+
+ * Intel\ |reg| Corporation Ethernet Controller 10G X550T
+
+ * Firmware version: 0x8000113b
+ * Device id (pf): 8086:1563
+ * Driver version: 5.11.3 (ixgbe)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter X710-DA4 (4x10G)
+
+ * Firmware version: 8.30 0x8000a49d 1.2926.0
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 2.15.9 (i40e)
+
+ * Intel\ |reg| Corporation Ethernet Connection X722 for 10GbE SFP+ (4x10G)
+
+ * Firmware version: 5.30 0x80002a29 1.2527.0
+ * Device id (pf/vf): 8086:37d0 / 8086:37cd
+ * Driver version: 2.15.9 (i40e)
+
+ * Intel\ |reg| Corporation Ethernet Connection X722 for 10GBASE-T (2x10G)
+
+ * Firmware version: 4.10 0x80001a7a
+ * Device id (pf/vf): 8086:37d2 / 8086:37cd
+ * Driver version: 2.15.9 (i40e)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter XXV710-DA2 (2x25G)
+
+ * Firmware version: 8.30 0x8000a485 1.2926.0
+ * Device id (pf/vf): 8086:158b / 8086:154c
+ * Driver version: 2.15.9 (i40e)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
+
+ * Firmware version: 8.30 0x8000a4ae 1.2926.0
+ * Device id (pf/vf): 8086:1583 / 8086:154c
+ * Driver version: 2.15.9 (i40e)
+
+ * Intel\ |reg| Corporation I350 Gigabit Network Connection
+
+ * Firmware version: 1.63, 0x80001001
+ * Device id (pf/vf): 8086:1521 / 8086:1520
+ * Driver version: 4.18.0-277.el8.x86_64 (igb)
+
+ * Intel\ |reg| Corporation I210 Gigabit Network Connection
+
+ * Firmware version: 3.25, 0x800006eb
+ * Device id (pf): 8086:1533
+ * Driver version: 5.5.2 (igb)
+
+ * Intel\ |reg| Ethernet Controller 10-Gigabit X540-AT2
+
+ * Firmware version: 0x800005f9
+ * Device id (pf): 8086:1528
+ * Driver version: 4.18.0-277.el8.x86_64 (ixgbe)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter X710-T2L
+
+ * Firmware version: 8.30 0x8000a489 1.2926.0
+ * Device id (pf): 8086:15ff
+ * Driver version: 2.15.9 (i40e)
+
+* Intel\ |reg| platforms with Mellanox\ |reg| NICs combinations
+
+ * CPU:
+
+ * Intel\ |reg| Xeon\ |reg| Gold 6154 CPU @ 3.00GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2697A v4 @ 2.60GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2697 v3 @ 2.60GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2680 v2 @ 2.80GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2670 0 @ 2.60GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2650 v4 @ 2.20GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2650 v3 @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2640 @ 2.50GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2650 0 @ 2.00GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2620 v4 @ 2.10GHz
+
+ * OS:
+
+ * Red Hat Enterprise Linux release 8.2 (Ootpa)
+ * Red Hat Enterprise Linux Server release 7.8 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.6 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.5 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.4 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.3 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.2 (Maipo)
+ * Ubuntu 20.04
+ * Ubuntu 18.04
+ * Ubuntu 16.04
+ * SUSE Enterprise Linux 15 SP2
+ * SUSE Enterprise Linux 12 SP4
+
+ * OFED:
+
+ * MLNX_OFED 5.3-1.0.0.1 and above
+ * MLNX_OFED 5.2-2.2.0.0
+
+ * upstream kernel:
+
+ * Linux 5.13.0-rc1 and above
+
+ * rdma-core:
+
+ * rdma-core-35.0-1 and above
+
+ * NICs:
+
+ * Mellanox\ |reg| ConnectX\ |reg|-3 Pro 40G MCX354A-FCC_Ax (2x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1007
+ * Firmware version: 2.42.5000
+
+ * Mellanox\ |reg| ConnectX\ |reg|-3 Pro 40G MCX354A-FCCT (2x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1007
+ * Firmware version: 2.42.5000
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.30.1004 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 Lx 50G MCX4131A-GCAT (1x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.30.1004 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 100G MCX516A-CCAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.30.1004 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.30.1004 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 100G MCX556A-EDAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.30.1004 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 Ex EN 100G MCX516A-CDAT (2x100G)
+
+ * Host interface: PCI Express 4.0 x16
+ * Device ID: 15b3:1019
+ * Firmware version: 16.30.1004 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-6 Dx EN 100G MCX623106AN-CDAT (2x100G)
+
+ * Host interface: PCI Express 4.0 x16
+ * Device ID: 15b3:101d
+ * Firmware version: 22.30.1004 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-6 Lx EN 25G MCX631102AN-ADAT (2x25G)
+
+ * Host interface: PCI Express 4.0 x8
+ * Device ID: 15b3:101f
+ * Firmware version: 26.30.1004 and above
-.. This section should contain a list of platforms that were tested
- with this release.
+* Mellanox\ |reg| BlueField\ |reg| SmartNIC
- The format is:
+ * Mellanox\ |reg| BlueField\ |reg| 2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
- * <vendor> platform with <vendor> <type of devices> combinations
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:a2d2
+ * Firmware version: 24.30.1004 and above
- * List of CPU
- * List of OS
- * List of devices
- * Other relevant details...
+ * Embedded software:
- This section is a comment. Do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =======================================================
+ * CentOS Linux release 8.2.2004 (Core)
+ * MLNX_OFED 5.3-1.0.0 and above
+ * DPDK application running on Arm cores
git.droids-corp.org / dpdk.git / blobdiff