in a transparent way, with EAL uncompressing using libarchive if this library
is available when building DPDK.
+* **Updated Amazon ENA PMD.**
+
+ The new driver version (v2.4.0) introduced bug fixes and improvements,
+ including:
+
+ * Added Rx interrupt support.
+ * RSS hash function key reconfiguration support.
+
* **Updated Intel iavf driver.**
* Added Tx QoS VF queue TC mapping.
+ * Added FDIR and RSS for GTPoGRE, support filter based on GTPU TEID/QFI,
+ outer most L3 or inner most l3/l4.
* **Updated Intel ice driver.**
* **Updated Mellanox mlx5 driver.**
+ * Added Sub-Function support based on auxiliary bus.
* Added support for meter hierarchy.
+ * Added support for metering policy actions of yellow color.
+ * Added support for metering trTCM RFC2698 and RFC4115.
* Added devargs options ``allow_duplicate_pattern``.
+ * Added matching on IPv4 Internet Header Length (IHL).
+ * Added support for matching on VXLAN header last 8-bits reserved field.
+ * Optimized multi-thread flow rule insertion rate.
+
+* **Added Wangxun ngbe PMD.**
+
+ Added a new PMD driver for Wangxun 1 Gigabit Ethernet NICs.
+ See the :doc:`../nics/ngbe` for more details.
+
+* **Updated Solarflare network PMD.**
+
+ Updated the Solarflare ``sfc_efx`` driver with changes including:
+
+ * Added COUNT action support for SN1000 NICs
+
+* **Added inflight packets clear API in vhost library.**
+
+ Added an API which can clear the inflight packets submitted to DMA
+ engine in vhost async data path.
+
+* **Updated Intel QuickAssist crypto PMD.**
+
+ Added fourth generation of QuickAssist Technology(QAT) devices support.
+ Only symmetric crypto has been currently enabled, compression and asymmetric
+ crypto PMD will fail to create.
* **Added support for Marvell CNXK crypto driver.**
Added support for crypto adapter OP_FORWARD mode.
+* **Added support for Nvidia crypto device driver.**
+
+ Added mlx5 crypto driver to support AES-XTS cipher operations.
+ The first device to support it is ConnectX-6.
+
+* **Updated ISAL compress device PMD.**
+
+ The ISAL compress device PMD now supports Arm platforms.
+
* **Added Baseband PHY CNXK PMD.**
Added Baseband PHY PMD which allows to configure BPHY hardware block
comprising accelerators and DSPs specifically tailored for 5G/LTE inline
- usecases. Configuration happens via standard rawdev enq/deq operations. See
+ use cases. Configuration happens via standard rawdev enq/deq operations. See
the :doc:`../rawdevs/cnxk_bphy` rawdev guide for more details on this driver.
+* **Added support for Marvell CN10K, CN9K, event Rx/Tx adapter.**
+
+ * Added Rx/Tx adapter support for event/cnxk when the ethernet device requested
+ is net/cnxk.
+ * Added support for event vectorization for Rx/Tx adapter.
+
* **Added cppc_cpufreq support to Power Management library.**
Added support for cppc_cpufreq driver which works on most arm64 platforms.
+* **Added multi-queue support to Ethernet PMD Power Management**
+
+ The experimental PMD power management API now supports managing
+ multiple Ethernet Rx queues per lcore.
+
+* **Updated testpmd to log errors to stderr.**
+
+ Updated testpmd application to log errors and warnings to stderr
+ instead of stdout used before.
+
Removed Items
-------------
* eal: ``rte_strscpy`` sets ``rte_errno`` to ``E2BIG`` in case of string
truncation.
+* eal: ``rte_bsf32_safe`` now takes a 32-bit value for its first argument.
+ This fixes warnings about loss of precision
+ when used with some compilers settings.
+
+* eal: ``rte_power_monitor`` and the ``rte_power_monitor_cond`` struct changed
+ to use a callback mechanism.
+
+* rte_power: The experimental PMD power management API is no longer considered
+ to be thread safe; all Rx queues affected by the API will now need to be
+ stopped before making any changes to the power management scheme.
+
ABI Changes
-----------
This section is a comment. Do not overwrite or remove it.
Also, make sure to start the actual text at the margin.
=======================================================
+
+* Intel\ |reg| platforms with Intel\ |reg| NICs combinations
+
+ * CPU
+
+ * Intel\ |reg| Atom\ |trade| CPU C3958 @ 2.00GHz
+ * Intel\ |reg| Atom\ |trade| CPU C3758 @ 2.20GHz
+ * Intel\ |reg| Xeon\ |reg| CPU D-1541 @ 2.10GHz
+ * Intel\ |reg| Xeon\ |reg| CPU D-1553N @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2680 v2 @ 2.80GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2699 v3 @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2699 v4 @ 2.20GHz
+ * Intel\ |reg| Xeon\ |reg| Gold 6140M CPU @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| Gold 6139 CPU @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| Gold 6252N CPU @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| Platinum 8180 CPU @ 2.50GHz
+ * Intel\ |reg| Xeon\ |reg| Platinum 8180M CPU @ 2.50GHz
+ * Intel\ |reg| Xeon\ |reg| Platinum 8280M CPU @ 2.70GHz
+
+ * OS:
+
+ * Fedora 34
+ * OpenWRT 19.07.4
+ * FreeBSD 12.1
+ * Red Hat Enterprise Linux Server release 8.3
+ * Suse 15 SP2
+ * Ubuntu 20.04
+ * Ubuntu 21.04
+
+ * NICs:
+
+ * Intel\ |reg| Ethernet Controller E810-C for SFP (4x25G)
+
+ * Firmware version: 3.10
+ * Device id (pf/vf): 8086:1593 / 8086:1889
+ * Driver version: 1.7.0 (ice)
+ * OS Default DDP: 1.3.27.0
+ * COMMS DDP: 1.3.31.0
+ * Wireless Edge DDP: 1.3.7.0
+
+ * Intel\ |reg| Ethernet Controller E810-C for QSFP (2x100G)
+
+ * Firmware version: 3.10
+ * Device id (pf/vf): 8086:1592 / 8086:1889
+ * Driver version: 1.7.0 (ice)
+ * OS Default DDP: 1.3.27.0
+ * COMMS DDP: 1.3.31.0
+ * Wireless Edge DDP: 1.3.7.0
+
+ * Intel\ |reg| 82599ES 10 Gigabit Ethernet Controller
+
+ * Firmware version: 0x61bf0001
+ * Device id (pf/vf): 8086:10fb / 8086:10ed
+ * Driver version: 5.1.0-k (ixgbe)
+
+ * Intel\ |reg| Corporation Ethernet Connection X552/X557-AT 10GBASE-T
+
+ * Firmware version: 0x800003e7
+ * Device id (pf/vf): 8086:15ad / 8086:15a8
+ * Driver version: 5.1.0-k (ixgbe)
+
+ * Intel\ |reg| Corporation Ethernet Controller 10G X550T
+
+ * Firmware version: 0x8000113b
+ * Device id (pf): 8086:1563
+ * Driver version: 5.11.3 (ixgbe)
+
+ * Intel\ |reg| Ethernet Controller 10-Gigabit X540-AT2
+
+ * Firmware version: 0x800005f9
+ * Device id (pf): 8086:1528
+ * Driver version: 4.18.0-305.7.1.el8_4.x86_64 (ixgbe)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter X710-DA4 (4x10G)
+
+ * Firmware version: 8.30 0x8000a49d 1.2926.0
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 2.15.9 (i40e)
+
+ * Intel\ |reg| Corporation Ethernet Connection X722 for 10GbE SFP+ (4x10G)
+
+ * Firmware version: 5.30 0x80002a29 1.2926.0
+ * Device id (pf/vf): 8086:37d0 / 8086:37cd
+ * Driver version: 2.15.9 (i40e)
+
+ * Intel\ |reg| Corporation Ethernet Connection X722 for 10GBASE-T (2x10G)
+
+ * Firmware version: 4.10 0x80001a7a 1.2154.0
+ * Device id (pf/vf): 8086:37d2 / 8086:37cd
+ * Driver version: 2.15.9 (i40e)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter XXV710-DA2 (2x25G)
+
+ * Firmware version: 8.30 0x8000a485 1.2926.0
+ * Device id (pf/vf): 8086:158b / 8086:154c
+ * Driver version: 2.15.9 (i40e)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
+
+ * Firmware version: 8.30 0x8000a4ae 1.2926.0
+ * Device id (pf/vf): 8086:1583 / 8086:154c
+ * Driver version: 2.15.9 (i40e)
+
+ * Intel\ |reg| Ethernet Converged Network Adapter X710-T2L
+
+ * Firmware version: 8.30 0x8000a489 1.2926.0
+ * Device id (pf): 8086:15ff
+ * Driver version: 2.15.9 (i40e)
+
+* Intel\ |reg| platforms with Mellanox\ |reg| NICs combinations
+
+ * CPU:
+
+ * Intel\ |reg| Xeon\ |reg| Gold 6154 CPU @ 3.00GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2697A v4 @ 2.60GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2697 v3 @ 2.60GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2680 v2 @ 2.80GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2670 0 @ 2.60GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2650 v4 @ 2.20GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2650 v3 @ 2.30GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2640 @ 2.50GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2650 0 @ 2.00GHz
+ * Intel\ |reg| Xeon\ |reg| CPU E5-2620 v4 @ 2.10GHz
+
+ * OS:
+
+ * Red Hat Enterprise Linux release 8.2 (Ootpa)
+ * Red Hat Enterprise Linux Server release 7.8 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.6 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.5 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.4 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.3 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.2 (Maipo)
+ * Ubuntu 20.04
+ * Ubuntu 18.04
+ * Ubuntu 16.04
+ * SUSE Enterprise Linux 15 SP2
+ * SUSE Enterprise Linux 12 SP4
+
+ * OFED:
+
+ * MLNX_OFED 5.4-1.0.3.0 and above
+ * MLNX_OFED 5.3-1.0.0.1
+
+ * upstream kernel:
+
+ * Linux 5.14.0-rc3 and above
+
+ * rdma-core:
+
+ * rdma-core-36.0 and above
+
+ * NICs:
+
+ * Mellanox\ |reg| ConnectX\ |reg|-3 Pro 40G MCX354A-FCC_Ax (2x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1007
+ * Firmware version: 2.42.5000
+
+ * Mellanox\ |reg| ConnectX\ |reg|-3 Pro 40G MCX354A-FCCT (2x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1007
+ * Firmware version: 2.42.5000
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.31.1014 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-4 Lx 50G MCX4131A-GCAT (1x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.31.1014 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 100G MCX516A-CCAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.31.1014 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.31.1014 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 100G MCX556A-EDAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.31.1014 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-5 Ex EN 100G MCX516A-CDAT (2x100G)
+
+ * Host interface: PCI Express 4.0 x16
+ * Device ID: 15b3:1019
+ * Firmware version: 16.31.1014 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-6 Dx EN 100G MCX623106AN-CDAT (2x100G)
+
+ * Host interface: PCI Express 4.0 x16
+ * Device ID: 15b3:101d
+ * Firmware version: 22.31.1014 and above
+
+ * Mellanox\ |reg| ConnectX\ |reg|-6 Lx EN 25G MCX631102AN-ADAT (2x25G)
+
+ * Host interface: PCI Express 4.0 x8
+ * Device ID: 15b3:101f
+ * Firmware version: 26.31.1014 and above
+
+* Mellanox\ |reg| BlueField\ |reg| SmartNIC
+
+ * Mellanox\ |reg| BlueField\ |reg| 2 SmartNIC MT41686 - MBF2H332A-AEEOT_A1 (2x25G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:a2d6
+ * Firmware version: 24.31.1014 and above
+
+ * Embedded software:
+
+ * CentOS Linux release 7.6.1810 (AltArch)
+ * MLNX_OFED 5.4-1.0.3.0 and above
+ * DPDK application running on Arm cores
git.droids-corp.org / dpdk.git / blobdiff