-.. BSD LICENSE
- Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2010-2014 Intel Corporation.
.. _l2_fwd_app_real_and_virtual:
Compiling the Application
-------------------------
-#. Go to the example directory:
+To compile the sample application see :doc:`compiling`.
- .. code-block:: console
-
- export RTE_SDK=/path/to/rte_sdk
- cd ${RTE_SDK}/examples/l2fwd
-
-#. Set the target (a default target is used if not specified). For example:
-
- .. code-block:: console
-
- export RTE_TARGET=x86_64-native-linuxapp-gcc
-
- *See the DPDK Getting Started Guide* for possible RTE_TARGET values.
-
-#. Build the application:
-
- .. code-block:: console
-
- make
+The application is located in the ``l2fwd`` sub-directory.
Running the Application
-----------------------
* --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default).
-To run the application in linuxapp environment with 4 lcores, 16 ports and 8 RX queues per lcore and MAC address
+To run the application in linux environment with 4 lcores, 16 ports and 8 RX queues per lcore and MAC address
updating enabled, issue the command:
.. code-block:: console
/* create the mbuf pool */
- l2fwd_pktmbuf_pool = rte_mempool_create("mbuf_pool", NB_MBUF, MBUF_SIZE, 32, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL, SOCKET0, 0);
+ l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF,
+ MEMPOOL_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
+ rte_socket_id());
if (l2fwd_pktmbuf_pool == NULL)
rte_panic("Cannot init mbuf pool\n");
The rte_mempool is a generic structure used to handle pools of objects.
-In this case, it is necessary to create a pool that will be used by the driver,
-which expects to have some reserved space in the mempool structure,
-sizeof(struct rte_pktmbuf_pool_private) bytes.
-The number of allocated pkt mbufs is NB_MBUF, with a size of MBUF_SIZE each.
+In this case, it is necessary to create a pool that will be used by the driver.
+The number of allocated pkt mbufs is NB_MBUF, with a data room size of
+RTE_MBUF_DEFAULT_BUF_SIZE each.
A per-lcore cache of 32 mbufs is kept.
The memory is allocated in NUMA socket 0,
but it is possible to extend this code to allocate one mbuf pool per socket.
-Two callback pointers are also given to the rte_mempool_create() function:
-
-* The first callback pointer is to rte_pktmbuf_pool_init() and is used
- to initialize the private data of the mempool, which is needed by the driver.
- This function is provided by the mbuf API, but can be copied and extended by the developer.
-
-* The second callback pointer given to rte_mempool_create() is the mbuf initializer.
- The default is used, that is, rte_pktmbuf_init(), which is provided in the rte_mbuf library.
- If a more complex application wants to extend the rte_pktmbuf structure for its own needs,
- a new function derived from rte_pktmbuf_init( ) can be created.
+The rte_pktmbuf_pool_create() function uses the default mbuf pool and mbuf
+initializers, respectively rte_pktmbuf_pool_init() and rte_pktmbuf_init().
+An advanced application may want to use the mempool API to create the
+mbuf pool with more control.
.. _l2_fwd_app_dvr_init:
.. code-block:: c
- if (rte_eal_pci_probe() < 0)
- rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
-
- nb_ports = rte_eth_dev_count();
-
- if (nb_ports == 0)
- rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");
-
/* reset l2fwd_dst_ports */
for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++)
* Each logical core is assigned a dedicated TX queue on each port.
*/
- for (portid = 0; portid < nb_ports; portid++) {
+ RTE_ETH_FOREACH_DEV(portid) {
/* skip ports that are not enabled */
if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
rte_eth_dev_info_get((uint8_t) portid, &dev_info);
}
-Observe that:
-
-* rte_igb_pmd_init_all() simultaneously registers the driver as a PCI driver and as an Ethernet* Poll Mode Driver.
-
-* rte_eal_pci_probe() parses the devices on the PCI bus and initializes recognized devices.
-
The next step is to configure the RX and TX queues.
For each port, there is only one RX queue (only one lcore is able to poll a given port).
The number of TX queues depends on the number of available lcores.
"err=%d, port=%u\n",
ret, portid);
-The global configuration is stored in a static structure:
-
-.. code-block:: c
-
- static const struct rte_eth_conf port_conf = {
- .rxmode = {
- .split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc= 0, /**< CRC stripped by hardware */
- },
-
- .txmode = {
- .mq_mode = ETH_DCB_NONE
- },
- };
-
.. _l2_fwd_app_rx_init:
RX Queue Initialization
The values n_rx_port and rx_port_list[] are used in the main packet processing loop
(see :ref:`l2_fwd_app_rx_tx_packets`).
-The global configuration for the RX queues is stored in a static structure:
-
-.. code-block:: c
-
- static const struct rte_eth_rxconf rx_conf = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
- };
-
.. _l2_fwd_app_tx_init:
TX Queue Initialization
static void
l2fwd_simple_forward(struct rte_mbuf *m, unsigned portid)
{
- struct ether_hdr *eth;
+ struct rte_ether_hdr *eth;
void *tmp;
unsigned dst_port;
dst_port = l2fwd_dst_ports[portid];
- eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
+ eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
/* 02:00:00:00:00:xx */
/* src addr */
- ether_addr_copy(&l2fwd_ports_eth_addr[dst_port], ð->s_addr);
+ rte_ether_addr_copy(&l2fwd_ports_eth_addr[dst_port], ð->s_addr);
l2fwd_send_packet(m, (uint8_t) dst_port);
}
/* Send the packet on an output interface */
static int
- l2fwd_send_packet(struct rte_mbuf *m, uint8_t port)
+ l2fwd_send_packet(struct rte_mbuf *m, uint16_t port)
{
unsigned lcore_id, len;
struct lcore_queue_conf *qconf;
git.droids-corp.org / dpdk.git / blobdiff