Set the speed and duplex mode for all ports or a specific port::
- testpmd> port config (port_id|all) speed (10|100|1000|10000|auto) \
+ testpmd> port config (port_id|all) speed (10|100|1000|10000|40000|100000|auto) \
duplex (half|full|auto)
port config - queues/descriptors
The ``on`` option is equivalent to the ``--crc-strip`` command-line option.
+port config - scatter
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Set RX scatter mode on or off for all ports::
+
+ testpmd> port config all scatter (on|off)
+
+RX scatter mode is off by default.
+
+The ``on`` option is equivalent to the ``--enable-scatter`` command-line option.
+
+port config - TX queue flags
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set a hexadecimal bitmap of TX queue flags for all ports::
+
+ testpmd> port config all txqflags value
+
+This command is equivalent to the ``--txqflags`` command-line option.
+
port config - RX Checksum
~~~~~~~~~~~~~~~~~~~~~~~~~
# Commands to add flow director filters of different flow types::
flow_director_filter (port_id) mode IP (add|del|update) \
- flow (ipv4-other|ipv4-frag|ipv6-other|ipv6-frag)
+ flow (ipv4-other|ipv4-frag|ipv6-other|ipv6-frag) \
src (src_ip_address) dst (dst_ip_address) \
+ tos (tos_value) proto (proto_value) ttl (ttl_value) \
vlan (vlan_value) flexbytes (flexbytes_value) \
(drop|fwd) pf|vf(vf_id) queue (queue_id) \
fd_id (fd_id_value)
flow (ipv4-tcp|ipv4-udp|ipv6-tcp|ipv6-udp) \
src (src_ip_address) (src_port) \
dst (dst_ip_address) (dst_port) \
+ tos (tos_value) ttl (ttl_value) \
vlan (vlan_value) flexbytes (flexbytes_value) \
(drop|fwd) queue pf|vf(vf_id) (queue_id) \
fd_id (fd_id_value)
flow_director_filter (port_id) mode IP (add|del|update) \
flow (ipv4-sctp|ipv6-sctp) \
src (src_ip_address) (src_port) \
- dst (dst_ip_address) (dst_port)
+ dst (dst_ip_address) (dst_port) \
+ tos (tos_value) ttl (ttl_value) \
tag (verification_tag) vlan (vlan_value) \
flexbytes (flexbytes_value) (drop|fwd) \
pf|vf(vf_id) queue (queue_id) fd_id (fd_id_value)
For example, to add an ipv4-udp flow type filter::
testpmd> flow_director_filter 0 add flow ipv4-udp src 2.2.2.3 32 \
- dst 2.2.2.5 33 vlan 0x1 flexbytes (0x88,0x48) fwd pf queue 1 fd_id 1
+ dst 2.2.2.5 33 tos 2 ttl 40 vlan 0x1 flexbytes (0x88,0x48) \
+ fwd pf queue 1 fd_id 1
For example, add an ipv4-other flow type filter::
testpmd> flow_director_filter 0 add flow ipv4-other src 2.2.2.3 \
- dst 2.2.2.5 vlan 0x1 flexbytes (0x88,0x48) fwd pf queue 1 fd_id 1
+ dst 2.2.2.5 tos 2 proto 20 ttl 40 vlan 0x1 \
+ flexbytes (0x88,0x48) fwd pf queue 1 fd_id 1
flush_flow_director
~~~~~~~~~~~~~~~~~~~
Set the input set for hash::
- set_hash_input_set (port_id) (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp| \
- ipv4-other|ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other| \
+ set_hash_input_set (port_id) (ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp| \
+ ipv4-other|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other| \
l2_payload) (ovlan|ivlan|src-ipv4|dst-ipv4|src-ipv6|dst-ipv6|ipv4-tos| \
ipv4-proto|ipv6-tc|ipv6-next-header|udp-src-port|udp-dst-port| \
tcp-src-port|tcp-dst-port|sctp-src-port|sctp-dst-port|sctp-veri-tag| \
udp-key|gre-key|fld-1st|fld-2nd|fld-3rd|fld-4th|fld-5th|fld-6th|fld-7th| \
fld-8th|none) (select|add)
-For example, to add source IP to hash input set for flow type of ipv4 on port 0::
+For example, to add source IP to hash input set for flow type of ipv4-udp on port 0::
- testpmd> set_hash_input_set 0 ipv4 src-ipv4 add
+ testpmd> set_hash_input_set 0 ipv4-udp src-ipv4 add
set_fdir_input_set
~~~~~~~~~~~~~~~~~~
-Set the input set for Fdir::
+The Flow Director filters can match the different fields for different type of packet, i.e. specific input set
+on per flow type and the flexible payload. This command can be used to change input set for each flow type.
- set_fdir_input_set (port_id) (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp| \
- ipv4-other|ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload)
- (src-ipv4|dst-ipv4|src-ipv6|dst-ipv6|udp-src-port|udp-dst-port| \
- tcp-src-port|tcp-dst-port|sctp-src-port|sctp-dst-port|sctp-veri-tag| \
- fld-1st|fld-2nd|fld-3rd|fld-4th|fld-5th|fld-6th|fld-7th|fld-8th|none) \
- (select|add)
+Set the input set for flow director::
+
+ set_fdir_input_set (port_id) (ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp| \
+ ipv4-other|ipv6|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other| \
+ l2_payload) (ivlan|ethertype|src-ipv4|dst-ipv4|src-ipv6|dst-ipv6|ipv4-tos| \
+ ipv4-proto|ipv4-ttl|ipv6-tc|ipv6-next-header|ipv6-hop-limits| \
+ tudp-src-port|udp-dst-port|cp-src-port|tcp-dst-port|sctp-src-port| \
+ sctp-dst-port|sctp-veri-tag|none) (select|add)
-For example to add source IP to FD input set for flow type of ipv4 on port 0::
+For example to add source IP to FD input set for flow type of ipv4-udp on port 0::
- testpmd> set_fdir_input_set 0 ipv4 src-ipv4 add
+ testpmd> set_fdir_input_set 0 ipv4-udp src-ipv4 add
global_config
~~~~~~~~~~~~~