app/testpmd: fix CRC strip command

[dpdk.git] / doc / guides / testpmd_app_ug / testpmd_funcs.rst

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 0d31538..1da60fa 100644 (file)
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -198,9 +198,7 @@ For example:
    Maximum number of MAC addresses: 64
    Maximum number of MAC addresses of hash filtering: 0
    VLAN offload:
-       strip on
-       filter on
-       qinq(extend) off
+       strip on, filter on, extend off, qinq strip off
    Redirection table size: 512
    Supported flow types:
      ipv4-frag
@@ -467,6 +465,13 @@ Show Tx metadata value set for a specific port::
 
    testpmd> show port (port_id) tx_metadata
 
+show port supported ptypes
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show ptypes supported for a specific port::
+
+   testpmd> show port (port_id) ptypes
+
 show device info
 ~~~~~~~~~~~~~~~~
 
@@ -799,13 +804,6 @@ Set broadcast mode for a VF from the PF::
 
    testpmd> set vf broadcast (port_id) (vf_id) (on|off)
 
-vlan set strip
-~~~~~~~~~~~~~~
-
-Set the VLAN strip on a port::
-
-   testpmd> vlan set strip (on|off) (port_id)
-
 vlan set stripq
 ~~~~~~~~~~~~~~~
 
@@ -841,19 +839,11 @@ Set VLAN antispoof for a VF from the PF::
 
    testpmd> set vf vlan antispoof (port_id) (vf_id) (on|off)
 
-vlan set filter
-~~~~~~~~~~~~~~~
-
-Set the VLAN filter on a port::
-
-   testpmd> vlan set filter (on|off) (port_id)
-
-vlan set qinq
-~~~~~~~~~~~~~
-
-Set the VLAN QinQ (extended queue in queue) on for a port::
+vlan set (strip|filter|qinq_strip|extend)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Set the VLAN strip/filter/QinQ strip/extend on for a port::
 
-   testpmd> vlan set qinq (on|off) (port_id)
+   testpmd> vlan set (strip|filter|qinq_strip|extend) (on|off) (port_id)
 
 vlan set tpid
 ~~~~~~~~~~~~~
@@ -1663,7 +1653,7 @@ Enable or disable a per port Rx offloading on all Rx queues of a port::
                   vlan_strip, ipv4_cksum, udp_cksum, tcp_cksum, tcp_lro,
                   qinq_strip, outer_ipv4_cksum, macsec_strip,
                   header_split, vlan_filter, vlan_extend, jumbo_frame,
-                  crc_strip, scatter, timestamp, security, keep_crc
+                  scatter, timestamp, security, keep_crc
 
 This command should be run when the port is stopped, or else it will fail.
 
@@ -1678,7 +1668,7 @@ Enable or disable a per queue Rx offloading only on a specific Rx queue::
                   vlan_strip, ipv4_cksum, udp_cksum, tcp_cksum, tcp_lro,
                   qinq_strip, outer_ipv4_cksum, macsec_strip,
                   header_split, vlan_filter, vlan_extend, jumbo_frame,
-                  crc_strip, scatter, timestamp, security, keep_crc
+                  scatter, timestamp, security, keep_crc
 
 This command should be run when the port is stopped, or else it will fail.
 
@@ -3403,7 +3393,7 @@ set_hash_global_config
 
 Set the global configurations of hash filters::
 
-   set_hash_global_config (port_id) (toeplitz|simple_xor|default) \
+   set_hash_global_config (port_id) (toeplitz|simple_xor|symmetric_toeplitz|default) \
    (ipv4|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|ipv4-other|ipv6|ipv6-frag| \
    ipv6-tcp|ipv6-udp|ipv6-sctp|ipv6-other|l2_payload|<flow_id>) \
    (enable|disable)
@@ -3892,6 +3882,14 @@ This section lists supported pattern items and their attributes, if any.
   - ``pdu_type {unsigned}``: PDU type.
   - ``qfi {unsigned}``: QoS flow identifier.
 
+- ``pppoes``, ``pppoed``: match PPPoE header.
+
+  - ``session_id {unsigned}``: session identifier.
+
+- ``pppoe_proto_id``: match PPPoE session protocol identifier.
+
+  - ``proto_id {unsigned}``: PPP protocol identifier.
+
 Actions list
 ^^^^^^^^^^^^
 
@@ -4373,7 +4371,7 @@ Sample QinQ flow rules
 Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
 
    testpmd> port stop 0
-   testpmd> vlan set qinq on 0
+   testpmd> vlan set qinq_strip on 0
 
 The above command sets the inner and outer TPID's to 0x8100.