testpmd> show port <TAB>
- info [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc X
- info [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc all
- stats [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc X
- stats [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc all
+ info [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc|cap X
+ info [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc|cap all
+ stats [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc|cap X
+ stats [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc|cap all
...
Display information for a given port or all ports::
- testpmd> show port (info|stats|xstats|fdir|stat_qmap|dcb_tc) (port_id|all)
+ testpmd> show port (info|stats|xstats|fdir|stat_qmap|dcb_tc|cap) (port_id|all)
The available information categories are:
* ``dcb_tc``: DCB information such as TC mapping.
+* ``cap``: Supported offload capabilities.
+
For example:
.. code-block:: console
testpmd> set vf mac antispoof (port_id) (vf_id) (on|off)
+set macsec offload
+~~~~~~~~~~~~~~~~~~
+
+Enable/disable MACsec offload::
+
+ testpmd> set macsec offload (port_id) on encrypt (on|off) replay-protect (on|off)
+ testpmd> set macsec offload (port_id) off
+
+set macsec sc
+~~~~~~~~~~~~~
+
+Configure MACsec secure connection (SC)::
+
+ testpmd> set macsec sc (tx|rx) (port_id) (mac) (pi)
+
+.. note::
+
+ The pi argument is ignored for tx.
+ Check the NIC Datasheet for hardware limits.
+
+set macsec sa
+~~~~~~~~~~~~~
+
+Configure MACsec secure association (SA)::
+
+ testpmd> set macsec sa (tx|rx) (port_id) (idx) (an) (pn) (key)
+
+.. note::
+
+ The IDX value must be 0 or 1.
+ Check the NIC Datasheet for hardware limits.
+
+set broadcast mode (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set broadcast mode for a VF from the PF::
+
+ testpmd> set vf broadcast (port_id) (vf_id) (on|off)
+
vlan set strip
~~~~~~~~~~~~~~
testpmd> set vf vlan insert (port_id) (vf_id) (vlan_id)
+vlan set tag (for VF)
+~~~~~~~~~~~~~~~~~~~~~
+
+Set VLAN tag for a VF from the PF::
+
+ testpmd> set vf vlan tag (port_id) (vf_id) (on|off)
+
vlan set antispoof (for VF)
~~~~~~~~~~~~~~~~~~~~~~~~~~~
testpmd> mac_add add port (port_id) vf (vf_id) (XX:XX:XX:XX:XX:XX)
+mac_addr set
+~~~~~~~~~~~~
+
+Set the default MAC address for a port::
+
+ testpmd> mac_addr set (port_id) (XX:XX:XX:XX:XX:XX)
+
mac_addr set (for VF)
~~~~~~~~~~~~~~~~~~~~~
Same as the ifconfig (8) option. Controls how multicast packets are handled.
+set promisc (for VF)
+~~~~~~~~~~~~~~~~~~~~
+
+Set the unicast promiscuous mode for a VF from PF.
+It's supported by Intel i40e NICs now.
+In promiscuous mode packets are not dropped if they aren't for the specified MAC address::
+
+ testpmd> set vf promisc (port_id) (vf_id) (on|off)
+
+set allmulticast (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set the multicast promiscuous mode for a VF from PF.
+It's supported by Intel i40e NICs now.
+In promiscuous mode packets are not dropped if they aren't for the specified MAC address::
+
+ testpmd> set vf allmulti (port_id) (vf_id) (on|off)
+
+set tx max bandwidth (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set TX max absolute bandwidth (Mbps) for a VF from PF::
+
+ testpmd> set vf tx max-bandwidth (port_id) (vf_id) (max_bandwidth)
+
set flow_ctrl rx
~~~~~~~~~~~~~~~~
* ``mac_ctrl_frame_fwd``: Enable receiving MAC control frames.
-* ``autoneg``: Change the auto-negotiation para mete.
+* ``autoneg``: Change the auto-negotiation parameter.
set pfc_ctrl rx
~~~~~~~~~~~~~~~