testpmd> show port (port_id) tx_metadata
+show device info
+~~~~~~~~~~~~~~~~
+
+Show general information about devices probed::
+
+ testpmd> show device info (<identifier>|all)
+
+For example:
+
+.. code-block:: console
+
+ testpmd> show device info net_pcap0
+
+ ********************* Infos for device net_pcap0 *********************
+ Bus name: vdev
+ Driver name: net_pcap
+ Devargs: iface=enP2p6s0,phy_mac=1
+ Connect to socket: -1
+
+ Port id: 2
+ MAC address: 1E:37:93:28:04:B8
+ Device name: net_pcap0
+
dump physmem
~~~~~~~~~~~~
To have a different decapsulation header, one of those commands must be called
before the flow rule creation.
+Config Raw Encapsulation
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Configure the raw data to be used when encapsulating a packet by
+rte_flow_action_raw_encap::
+
+ set raw_encap {item} [/ {item} [...]] / end_set
+
+This command will set an internal buffer inside testpmd, any following flow rule
+using the action raw_encap will use the last configuration set.
+To have a different encapsulation header, this command must be called before the
+flow rule creation.
+
+Config Raw Decapsulation
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Configure the raw data to be used when decapsulating a packet by
+rte_flow_action_raw_decap::
+
+ set raw_decap {item} [/ {item} [...]] / end_set
+
+This command will set an internal buffer inside testpmd, any following flow rule
+using the action raw_decap will use the last configuration set.
+
Port Functions
--------------
This is equivalent to the ``--max-pkt-len`` command-line option.
-port config - CRC Strip
-~~~~~~~~~~~~~~~~~~~~~~~
-
-Set hardware CRC stripping on or off for all ports::
-
- testpmd> port config all crc-strip (on|off)
-
-CRC stripping is on by default.
-
-The ``off`` option is equivalent to the ``--disable-crc-strip`` command-line option.
-
-port config - scatter
-~~~~~~~~~~~~~~~~~~~~~~~
-
-Set RX scatter mode on or off for all ports::
-
- testpmd> port config all scatter (on|off)
-
-RX scatter mode is off by default.
-
-The ``on`` option is equivalent to the ``--enable-scatter`` command-line option.
-
-port config - RX Checksum
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Set hardware RX checksum offload to on or off for all ports::
-
- testpmd> port config all rx-cksum (on|off)
-
-Checksum offload is off by default.
-
-The ``on`` option is equivalent to the ``--enable-rx-cksum`` command-line option.
-
-port config - VLAN
-~~~~~~~~~~~~~~~~~~
-
-Set hardware VLAN on or off for all ports::
-
- testpmd> port config all hw-vlan (on|off)
-
-Hardware VLAN is off by default.
-
-The ``on`` option is equivalent to the ``--enable-hw-vlan`` command-line option.
-
-port config - VLAN filter
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Set hardware VLAN filter on or off for all ports::
-
- testpmd> port config all hw-vlan-filter (on|off)
-
-Hardware VLAN filter is off by default.
-
-The ``on`` option is equivalent to the ``--enable-hw-vlan-filter`` command-line option.
-
-port config - VLAN strip
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Set hardware VLAN strip on or off for all ports::
-
- testpmd> port config all hw-vlan-strip (on|off)
-
-Hardware VLAN strip is off by default.
-
-The ``on`` option is equivalent to the ``--enable-hw-vlan-strip`` command-line option.
-
-port config - VLAN extend
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Set hardware VLAN extend on or off for all ports::
-
- testpmd> port config all hw-vlan-extend (on|off)
-
-Hardware VLAN extend is off by default.
-
-The ``on`` option is equivalent to the ``--enable-hw-vlan-extend`` command-line option.
-
port config - Drop Packets
~~~~~~~~~~~~~~~~~~~~~~~~~~
-Set packet drop for packets with no descriptors on or off for all ports::
+Enable or disable packet drop on all RX queues of all ports when no receive buffers available::
testpmd> port config all drop-en (on|off)
-Packet dropping for packets with no descriptors is off by default.
+Packet dropping when no receive buffers available is off by default.
The ``on`` option is equivalent to the ``--enable-drop-en`` command-line option.
ipv6-udp-ex <string of hex digits \
(variable length, NIC dependent)>)
+Device Functions
+----------------
+
+The following sections show functions for device operations.
+
+device detach
+~~~~~~~~~~~~~
+
+Detach a device specified by pci address or virtual device args::
+
+ testpmd> device detach (identifier)
+
+Before detaching a device associated with ports, the ports should be stopped and closed.
+
+For example, to detach a pci device whose address is 0002:03:00.0.
+
+.. code-block:: console
+
+ testpmd> device detach 0002:03:00.0
+ Removing a device...
+ Port 1 is now closed
+ EAL: Releasing pci mapped resource for 0002:03:00.0
+ EAL: Calling pci_unmap_resource for 0002:03:00.0 at 0x218a050000
+ EAL: Calling pci_unmap_resource for 0002:03:00.0 at 0x218c050000
+ Device 0002:03:00.0 is detached
+ Now total ports is 1
+
+For example, to detach a port created by pcap PMD.
+
+.. code-block:: console
+
+ testpmd> device detach net_pcap0
+ Removing a device...
+ Port 0 is now closed
+ Device net_pcap0 is detached
+ Now total ports is 0
+ Done
+
+In this case, identifier is ``net_pcap0``.
+This identifier format is the same as ``--vdev`` format of DPDK applications.
+
Link Bonding Functions
----------------------
testpmd> flow create 0 ingress pattern eth / vlan / ipv6 / udp / mpls / end
actions mplsoudp_decap / l2_encap / end
+Sample Raw encapsulation rule
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Raw encapsulation configuration can be set by the following commands
+
+Eecapsulating VxLAN::
+
+ testpmd> set raw_encap eth src is 10:11:22:33:44:55 / vlan tci is 1
+ inner_type is 0x0800 / ipv4 / udp dst is 4789 / vxlan vni
+ is 2 / end_set
+ testpmd> flow create 0 egress pattern eth / ipv4 / end actions
+ raw_encap / end
+
+Sample Raw decapsulation rule
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Raw decapsulation configuration can be set by the following commands
+
+Decapsulating VxLAN::
+
+ testpmd> set raw_decap eth / ipv4 / udp / vxlan / end_set
+ testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan / eth / ipv4 /
+ end actions raw_decap / queue index 0 / end
+
BPF Functions
--------------
git.droids-corp.org / dpdk.git / blobdiff