testpmd> set port (port_id) fec_mode auto|off|rs|baser
+Config Sample actions list
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Configure the sample actions list to be used when sampling a packet by
+rte_flow_action_sample::
+
+ set sample_actions {index} {action} [/ {action} [...]] / end
+
+There are multiple global buffers for ``sample_actions``, this command will set
+one internal buffer index by ``{index}``.
+
+In order to use different sample actions list, ``index`` must be specified
+during the flow rule creation::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / end actions
+ sample ratio 2 index 2 / end
+
+Otherwise the default index ``0`` is used.
Port Functions
--------------
Add meter profile (srTCM rfc2697) to the ethernet device::
testpmd> add port meter profile srtcm_rfc2697 (port_id) (profile_id) \
- (cir) (cbs) (ebs)
+ (cir) (cbs) (ebs) (packet_mode)
where:
* ``profile_id``: ID for the meter profile.
-* ``cir``: Committed Information Rate (CIR) (bytes/second).
-* ``cbs``: Committed Burst Size (CBS) (bytes).
-* ``ebs``: Excess Burst Size (EBS) (bytes).
+* ``cir``: Committed Information Rate (CIR) (bytes per second or packets per second).
+* ``cbs``: Committed Burst Size (CBS) (bytes or packets).
+* ``ebs``: Excess Burst Size (EBS) (bytes or packets).
+* ``packet_mode``: Packets mode for meter profile.
add port meter profile (trTCM rfc2968)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add meter profile (srTCM rfc2698) to the ethernet device::
testpmd> add port meter profile trtcm_rfc2698 (port_id) (profile_id) \
- (cir) (pir) (cbs) (pbs)
+ (cir) (pir) (cbs) (pbs) (packet_mode)
where:
* ``profile_id``: ID for the meter profile.
-* ``cir``: Committed information rate (bytes/second).
-* ``pir``: Peak information rate (bytes/second).
-* ``cbs``: Committed burst size (bytes).
-* ``pbs``: Peak burst size (bytes).
+* ``cir``: Committed information rate (bytes per second or packets per second).
+* ``pir``: Peak information rate (bytes per second or packets per second).
+* ``cbs``: Committed burst size (bytes or packets).
+* ``pbs``: Peak burst size (bytes or packets).
+* ``packet_mode``: Packets mode for meter profile.
add port meter profile (trTCM rfc4115)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add meter profile (trTCM rfc4115) to the ethernet device::
testpmd> add port meter profile trtcm_rfc4115 (port_id) (profile_id) \
- (cir) (eir) (cbs) (ebs)
+ (cir) (eir) (cbs) (ebs) (packet_mode)
where:
* ``profile_id``: ID for the meter profile.
-* ``cir``: Committed information rate (bytes/second).
-* ``eir``: Excess information rate (bytes/second).
-* ``cbs``: Committed burst size (bytes).
-* ``ebs``: Excess burst size (bytes).
+* ``cir``: Committed information rate (bytes per second or packets per second).
+* ``eir``: Excess information rate (bytes per second or packets per second).
+* ``cbs``: Committed burst size (bytes or packets).
+* ``ebs``: Excess burst size (bytes or packets).
+* ``packet_mode``: Packets mode for meter profile.
delete port meter profile
~~~~~~~~~~~~~~~~~~~~~~~~~
- Dump internal representation information of all flows in hardware::
- flow dump {port_id} {output_file}
+ flow dump {port_id} all {output_file}
+
+ for one flow::
+
+ flow dump {port_id} rule {rule_id} {output_file}
- List and destroy aged flow rules::
testpmd> flow create 0 ingress pattern eth / ipv6 / pfcp s_field is 1
seid is 1 / end actions queue index 3 / end
+Sample Sampling/Mirroring rules
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Sample/Mirroring rules can be set by the following commands
+
+NIC-RX Sampling rule, the matched ingress packets and sent to the queue 1,
+and 50% packets are duplicated and marked with 0x1234 and sent to queue 0.
+
+::
+
+ testpmd> set sample_actions 0 mark id 0x1234 / queue index 0 / end
+ testpmd> flow create 0 ingress group 1 pattern eth / end actions
+ sample ratio 2 index 0 / queue index 1 / end
+
+Mirroring rule with port representors (with "transfer" attribute), the matched
+ingress packets with encapsulation header are sent to port id 0, and also
+mirrored the packets and sent to port id 2.
+
+::
+
+ testpmd> set sample_actions 0 port_id id 2 / end
+ testpmd> flow create 1 ingress transfer pattern eth / end actions
+ sample ratio 1 index 0 / raw_encap / port_id id 0 / end
+
+Mirroring rule with port representors (with "transfer" attribute), the matched
+ingress packets are sent to port id 2, and also mirrored the packets with
+encapsulation header and sent to port id 0.
+
+::
+
+ testpmd> set sample_actions 0 raw_encap / port_id id 0 / end
+ testpmd> flow create 0 ingress transfer pattern eth / end actions
+ sample ratio 1 index 0 / port_id id 2 / end
+
+Mirroring rule with port representors (with "transfer" attribute), the matched
+ingress packets are sent to port id 2, and also mirrored the packets with
+VXLAN encapsulation header and sent to port id 0.
+
+::
+
+ testpmd> set vxlan ip-version ipv4 vni 4 udp-src 4 udp-dst 4 ip-src 127.0.0.1
+ ip-dst 128.0.0.1 eth-src 11:11:11:11:11:11 eth-dst 22:22:22:22:22:22
+ testpmd> set sample_actions 0 vxlan_encap / port_id id 0 / end
+ testpmd> flow create 0 ingress transfer pattern eth / end actions
+ sample ratio 1 index 0 / port_id id 2 / end
+
+Mirroring rule with port representors (with "transfer" attribute), the matched
+ingress packets are sent to port id 2, and also mirrored the packets with
+NVGRE encapsulation header and sent to port id 0.
+
+::
+
+ testpmd> set nvgre ip-version ipv4 tni 4 ip-src 127.0.0.1 ip-dst 128.0.0.1
+ eth-src 11:11:11:11:11:11 eth-dst 22:22:22:22:22:22
+ testpmd> set sample_actions 0 nvgre_encap / port_id id 0 / end
+ testpmd> flow create 0 ingress transfer pattern eth / end actions
+ sample ratio 1 index 0 / port_id id 2 / end
+
BPF Functions
--------------
git.droids-corp.org / dpdk.git / blobdiff