testpmd> set port (port_id) vf (vf_id) rate (rate_value) queue_mask (queue_mask)
-set port - mirror rule
-~~~~~~~~~~~~~~~~~~~~~~
-
-Set pool or vlan type mirror rule for a port::
-
- testpmd> set port (port_id) mirror-rule (rule_id) \
- (pool-mirror-up|pool-mirror-down|vlan-mirror) \
- (poolmask|vlanid[,vlanid]*) dst-pool (pool_id) (on|off)
-
-Set link mirror rule for a port::
-
- testpmd> set port (port_id) mirror-rule (rule_id) \
- (uplink-mirror|downlink-mirror) dst-pool (pool_id) (on|off)
-
-For example to enable mirror traffic with vlan 0,1 to pool 0::
-
- set port 0 mirror-rule 0 vlan-mirror 0,1 dst-pool 0 on
-
-reset port - mirror rule
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Reset a mirror rule for a port::
-
- testpmd> reset port (port_id) mirror-rule (rule_id)
-
set flush_rx
~~~~~~~~~~~~
Where:
-* ``valid_only``: A flag indicates if only list valid items(=1) or all itemss(=0).
+* ``valid_only``: A flag indicates if only list valid items(=1) or all items(=0).
Replace a specific or a group of software defined ptype with a new one::
Active Slaves (3): [1 3 4]
Primary: [3]
+show bonding lacp info
+~~~~~~~~~~~~~~~~~~~~~~
+
+Show information about the Link Bonding device in mode 4 (link-aggregation-802.3ad)::
+
+ testpmd> show bonding lacp info (port_id)
Register Functions
------------------
- ``vxlan``: match VXLAN header.
- ``vni {unsigned}``: VXLAN identifier.
+ - ``last_rsvd {unsigned}``: VXLAN last reserved 8-bits.
- ``e_tag``: match IEEE 802.1BR E-Tag header.
- ``pdu_type {unsigned}``: PDU type.
- - ``qfi {unsigned}``: PPP, RQI and QoS flow identifier.
+ - ``qfi {unsigned}``: QoS flow identifier.
- ``pppoes``, ``pppoed``: match PPPoE header.
- ``conntrack``: match conntrack state.
+- ``port_representor``: match traffic entering the embedded switch from the given ethdev
+
+ - ``port_id {unsigned}``: ethdev port ID
+
Actions list
^^^^^^^^^^^^
Raw encapsulation configuration can be set by the following commands
-Eecapsulating VxLAN::
+Encapsulating VxLAN::
testpmd> set raw_encap 4 eth src is 10:11:22:33:44:55 / vlan tci is 1
inner_type is 0x0800 / ipv4 / udp dst is 4789 / vxlan vni