testpmd> show port <TAB>
- info [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc X
- info [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc all
- stats [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc X
- stats [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc all
+ info [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc|cap X
+ info [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc|cap all
+ stats [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc|cap X
+ stats [Mul-choice STRING]: show|clear port info|stats|xstats|fdir|stat_qmap|dcb_tc|cap all
...
help all : All of the above sections.
+Command File Functions
+----------------------
+
+To facilitate loading large number of commands or to avoid cutting and pasting where not
+practical or possible testpmd supports alternative methods for executing commands.
+
+* If started with the ``--cmdline-file=FILENAME`` command line argument testpmd
+ will execute all CLI commands contained within the file immediately before
+ starting packet forwarding or entering interactive mode.
+
+.. code-block:: console
+
+ ./testpmd -n4 -r2 ... -- -i --cmdline-file=/home/ubuntu/flow-create-commands.txt
+ Interactive-mode selected
+ CLI commands to be read from /home/ubuntu/flow-create-commands.txt
+ Configuring Port 0 (socket 0)
+ Port 0: 7C:FE:90:CB:74:CE
+ Configuring Port 1 (socket 0)
+ Port 1: 7C:FE:90:CB:74:CA
+ Checking link statuses...
+ Port 0 Link Up - speed 10000 Mbps - full-duplex
+ Port 1 Link Up - speed 10000 Mbps - full-duplex
+ Done
+ Flow rule #0 created
+ Flow rule #1 created
+ ...
+ ...
+ Flow rule #498 created
+ Flow rule #499 created
+ Read all CLI commands from /home/ubuntu/flow-create-commands.txt
+ testpmd>
+
+
+* At run-time additional commands can be loaded in bulk by invoking the ``load FILENAME``
+ command.
+
+.. code-block:: console
+
+ testpmd> load /home/ubuntu/flow-create-commands.txt
+ Flow rule #0 created
+ Flow rule #1 created
+ ...
+ ...
+ Flow rule #498 created
+ Flow rule #499 created
+ Read all CLI commands from /home/ubuntu/flow-create-commands.txt
+ testpmd>
+
+
+In all cases output from any included command will be displayed as standard output.
+Execution will continue until the end of the file is reached regardless of
+whether any errors occur. The end user must examine the output to determine if
+any failures occurred.
+
+
Control Functions
-----------------
Display information for a given port or all ports::
- testpmd> show port (info|stats|xstats|fdir|stat_qmap|dcb_tc) (port_id|all)
+ testpmd> show port (info|stats|xstats|fdir|stat_qmap|dcb_tc|cap) (port_id|all)
The available information categories are:
* ``dcb_tc``: DCB information such as TC mapping.
+* ``cap``: Supported offload capabilities.
+
For example:
.. code-block:: console
testpmd> read txd 0 0 4
0x00000001 - 0x24C3C440 / 0x000F0000 - 0x2330003C
+ddp get list
+~~~~~~~~~~~~
+
+Get loaded dynamic device personalization (DDP) package info list::
+
+ testpmd> ddp get list (port_id)
+
+ddp get info
+~~~~~~~~~~~~
+
+Display information about dynamic device personalization (DDP) profile::
+
+ testpmd> ddp get info (profile_patch)
+
+show vf stats
+~~~~~~~~~~~~~
+
+Display VF statistics::
+
+ testpmd> show vf stats (port_id) (vf_id)
+
+clear vf stats
+~~~~~~~~~~~~~~
+
+Reset VF statistics::
+
+ testpmd> clear vf stats (port_id) (vf_id)
Configuration Functions
-----------------------
testpmd> set vf mac antispoof (port_id) (vf_id) (on|off)
+set macsec offload
+~~~~~~~~~~~~~~~~~~
+
+Enable/disable MACsec offload::
+
+ testpmd> set macsec offload (port_id) on encrypt (on|off) replay-protect (on|off)
+ testpmd> set macsec offload (port_id) off
+
+set macsec sc
+~~~~~~~~~~~~~
+
+Configure MACsec secure connection (SC)::
+
+ testpmd> set macsec sc (tx|rx) (port_id) (mac) (pi)
+
+.. note::
+
+ The pi argument is ignored for tx.
+ Check the NIC Datasheet for hardware limits.
+
+set macsec sa
+~~~~~~~~~~~~~
+
+Configure MACsec secure association (SA)::
+
+ testpmd> set macsec sa (tx|rx) (port_id) (idx) (an) (pn) (key)
+
+.. note::
+
+ The IDX value must be 0 or 1.
+ Check the NIC Datasheet for hardware limits.
+
+set broadcast mode (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set broadcast mode for a VF from the PF::
+
+ testpmd> set vf broadcast (port_id) (vf_id) (on|off)
+
vlan set strip
~~~~~~~~~~~~~~
testpmd> set vf vlan insert (port_id) (vf_id) (vlan_id)
+vlan set tag (for VF)
+~~~~~~~~~~~~~~~~~~~~~
+
+Set VLAN tag for a VF from the PF::
+
+ testpmd> set vf vlan tag (port_id) (vf_id) (on|off)
+
vlan set antispoof (for VF)
~~~~~~~~~~~~~~~~~~~~~~~~~~~
testpmd> tso show (port_id)
+gro
+~~~
+
+Enable or disable GRO in ``csum`` forwarding engine::
+
+ testpmd> gro (on|off) (port_id)
+
+If enabled, the csum forwarding engine will perform GRO on the TCP/IPv4
+packets received from the given port.
+
+If disabled, packets received from the given port won't be performed
+GRO. By default, GRO is disabled for all ports.
+
+.. note::
+
+ When enable GRO for a port, TCP/IPv4 packets received from the port
+ will be performed GRO. After GRO, the merged packets are multi-segments.
+ But csum forwarding engine doesn't support to calculate TCP checksum
+ for multi-segment packets in SW. So please select TCP HW checksum
+ calculation for the port which GROed packets are transmitted to.
+
+gro set
+~~~~~~~
+
+Set max flow number and max packet number per-flow for GRO::
+
+ testpmd> gro set (max_flow_num) (max_item_num_per_flow) (port_id)
+
+The product of ``max_flow_num`` and ``max_item_num_per_flow`` is the max
+number of packets a GRO table can store.
+
+If current packet number is greater than or equal to the max value, GRO
+will stop processing incoming packets.
+
mac_addr add
~~~~~~~~~~~~
testpmd> mac_add add port (port_id) vf (vf_id) (XX:XX:XX:XX:XX:XX)
+mac_addr set
+~~~~~~~~~~~~
+
+Set the default MAC address for a port::
+
+ testpmd> mac_addr set (port_id) (XX:XX:XX:XX:XX:XX)
+
mac_addr set (for VF)
~~~~~~~~~~~~~~~~~~~~~
Same as the ifconfig (8) option. Controls how multicast packets are handled.
+set promisc (for VF)
+~~~~~~~~~~~~~~~~~~~~
+
+Set the unicast promiscuous mode for a VF from PF.
+It's supported by Intel i40e NICs now.
+In promiscuous mode packets are not dropped if they aren't for the specified MAC address::
+
+ testpmd> set vf promisc (port_id) (vf_id) (on|off)
+
+set allmulticast (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set the multicast promiscuous mode for a VF from PF.
+It's supported by Intel i40e NICs now.
+In promiscuous mode packets are not dropped if they aren't for the specified MAC address::
+
+ testpmd> set vf allmulti (port_id) (vf_id) (on|off)
+
+set tx max bandwidth (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set TX max absolute bandwidth (Mbps) for a VF from PF::
+
+ testpmd> set vf tx max-bandwidth (port_id) (vf_id) (max_bandwidth)
+
+set tc tx min bandwidth (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set all TCs' TX min relative bandwidth (%) for a VF from PF::
+
+ testpmd> set vf tc tx min-bandwidth (port_id) (vf_id) (bw1, bw2, ...)
+
+set tc tx max bandwidth (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set a TC's TX max absolute bandwidth (Mbps) for a VF from PF::
+
+ testpmd> set vf tc tx max-bandwidth (port_id) (vf_id) (tc_no) (max_bandwidth)
+
+set tc strict link priority mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set some TCs' strict link priority mode on a physical port::
+
+ testpmd> set tx strict-link-priority (port_id) (tc_bitmap)
+
+set tc tx min bandwidth
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Set all TCs' TX min relative bandwidth (%) globally for all PF and VFs::
+
+ testpmd> set tc tx min-bandwidth (port_id) (bw1, bw2, ...)
+
set flow_ctrl rx
~~~~~~~~~~~~~~~~
* ``mac_ctrl_frame_fwd``: Enable receiving MAC control frames.
-* ``autoneg``: Change the auto-negotiation para mete.
+* ``autoneg``: Change the auto-negotiation parameter.
set pfc_ctrl rx
~~~~~~~~~~~~~~~
Delete an E-tag forwarding filter on a port::
testpmd> E-tag set filter del e-tag-id (value) port (port_id)
+ddp add
+~~~~~~~
+
+Load a dynamic device personalization (DDP) package::
+
+ testpmd> ddp add (port_id) (package_path[,output_path])
+
+ddp del
+~~~~~~~
+
+Delete a dynamic device personalization package::
+
+ testpmd> ddp del (port_id) (package_path)
+
+ptype mapping
+~~~~~~~~~~~~~
+
+List all items from the ptype mapping table::
+
+ testpmd> ptype mapping get (port_id) (valid_only)
+
+Where:
+
+* ``valid_only``: A flag indicates if only list valid items(=1) or all itemss(=0).
+
+Replace a specific or a group of software defined ptype with a new one::
+
+ testpmd> ptype mapping replace (port_id) (target) (mask) (pkt_type)
+
+where:
+
+* ``target``: A specific software ptype or a mask to represent a group of software ptypes.
+
+* ``mask``: A flag indicate if "target" is a specific software ptype(=0) or a ptype mask(=1).
+
+* ``pkt_type``: The new software ptype to replace the old ones.
+
+Update hardware defined ptype to software defined packet type mapping table::
+
+ testpmd> ptype mapping update (port_id) (hw_ptype) (sw_ptype)
+
+where:
+
+* ``hw_ptype``: hardware ptype as the index of the ptype mapping table.
+
+* ``sw_ptype``: software ptype as the value of the ptype mapping table.
+
+Reset ptype mapping table::
+
+ testpmd> ptype mapping reset (port_id)
Port Functions
--------------
.. code-block:: console
# Check the status of the available devices.
- ./tools/dpdk-devbind.py --status
+ ./usertools/dpdk-devbind.py --status
Network devices using DPDK-compatible driver
============================================
# Bind the device to igb_uio.
- sudo ./tools/dpdk-devbind.py -b igb_uio 0000:0a:00.0
+ sudo ./usertools/dpdk-devbind.py -b igb_uio 0000:0a:00.0
# Recheck the status of the devices.
- ./tools/dpdk-devbind.py --status
+ ./usertools/dpdk-devbind.py --status
Network devices using DPDK-compatible driver
============================================
0000:0a:00.0 '82599ES 10-Gigabit' drv=igb_uio unused=
.. code-block:: console
- sudo ./tools/dpdk-devbind.py -b ixgbe 0000:0a:00.0
+ sudo ./usertools/dpdk-devbind.py -b ixgbe 0000:0a:00.0
- ./tools/dpdk-devbind.py --status
+ ./usertools/dpdk-devbind.py --status
Network devices using DPDK-compatible driver
============================================
testpmd> port config all crc-strip (on|off)
-CRC stripping is off by default.
+CRC stripping is on by default.
-The ``on`` option is equivalent to the ``--crc-strip`` command-line option.
+The ``off`` option is equivalent to the ``--disable-crc-strip`` command-line option.
port config - scatter
~~~~~~~~~~~~~~~~~~~~~~~
testpmd> set bonding mon_period 5 150
+set bonding lacp dedicated_queue
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Enable dedicated tx/rx queues on bonding devices slaves to handle LACP control plane traffic
+when in mode 4 (link-aggregration-802.3ad)
+
+ testpmd> set bonding lacp dedicated_queues (port_id) (enable|disable)
+
+
show bonding config
~~~~~~~~~~~~~~~~~~~
---------------------
Control of the generic flow API (*rte_flow*) is fully exposed through the
-``flow`` command (validation, creation, destruction and queries).
+``flow`` command (validation, creation, destruction, queries and operation
+modes).
Considering *rte_flow* overlaps with all `Filter Functions`_, using both
features simultaneously may cause undefined side-effects and is therefore
flow list {port_id} [group {group_id}] [...]
+- Restrict ingress traffic to the defined flow rules::
+
+ flow isolate {port_id} {boolean}
+
Validating flow rules
~~~~~~~~~~~~~~~~~~~~~
- ``vni {unsigned}``: VXLAN identifier.
+- ``e_tag``: match IEEE 802.1BR E-Tag header.
+
+ - ``grp_ecid_b {unsigned}``: GRP and E-CID base.
+
+- ``nvgre``: match NVGRE header.
+
+ - ``tni {unsigned}``: virtual subnet ID.
+
+- ``mpls``: match MPLS header.
+
+ - ``label {unsigned}``: MPLS label.
+
+- ``gre``: match GRE header.
+
+ - ``protocol {unsigned}``: protocol type.
+
+- ``fuzzy``: fuzzy pattern match, expect faster than default.
+
+ - ``thresh {unsigned}``: accuracy threshold.
+
Actions list
^^^^^^^^^^^^
5 0 1000 i- ETH IPV6 ICMP => QUEUE
7 63 0 i- ETH IPV6 UDP VXLAN => MARK QUEUE
testpmd>
+
+Toggling isolated mode
+~~~~~~~~~~~~~~~~~~~~~~
+
+``flow isolate`` can be used to tell the underlying PMD that ingress traffic
+must only be injected from the defined flow rules; that no default traffic
+is expected outside those rules and the driver is free to assign more
+resources to handle them. It is bound to ``rte_flow_isolate()``::
+
+ flow isolate {port_id} {boolean}
+
+If successful, enabling or disabling isolated mode shows either::
+
+ Ingress traffic on port [...]
+ is now restricted to the defined flow rules
+
+Or::
+
+ Ingress traffic on port [...]
+ is not restricted anymore to the defined flow rules
+
+Otherwise, in case of error::
+
+ Caught error type [...] ([...]): [...]
+
+Mainly due to its side effects, PMDs supporting this mode may not have the
+ability to toggle it more than once without reinitializing affected ports
+first (e.g. by exiting testpmd).
+
+Enabling isolated mode::
+
+ testpmd> flow isolate 0 true
+ Ingress traffic on port 0 is now restricted to the defined flow rules
+ testpmd>
+
+Disabling isolated mode::
+
+ testpmd> flow isolate 0 false
+ Ingress traffic on port 0 is not restricted anymore to the defined flow rules
+ testpmd>
+
+Sample QinQ flow rules
+~~~~~~~~~~~~~~~~~~~~~~
+
+Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
+
+ testpmd> port stop 0
+ testpmd> vlan set qinq on 0
+
+The above command sets the inner and outer TPID's to 0x8100.
+
+To change the TPID's the following commands should be used::
+
+ testpmd> vlan set outer tpid 0xa100 0
+ testpmd> vlan set inner tpid 0x9100 0
+ testpmd> port start 0
+
+Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.
+
+::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 123 /
+ vlan tci is 456 / end actions vf id 1 / queue index 0 / end
+ Flow rule #0 validated
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 4 /
+ vlan tci is 456 / end actions vf id 123 / queue index 0 / end
+ Flow rule #0 created
+
+ testpmd> flow list 0
+ ID Group Prio Attr Rule
+ 0 0 0 i- ETH VLAN VLAN=>VF QUEUE
+
+Validate and create a QinQ rule on port 0 to steer traffic to a queue on the host.
+
+::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 321 /
+ vlan tci is 654 / end actions pf / queue index 0 / end
+ Flow rule #1 validated
+
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 321 /
+ vlan tci is 654 / end actions pf / queue index 1 / end
+ Flow rule #1 created
+
+ testpmd> flow list 0
+ ID Group Prio Attr Rule
+ 0 0 0 i- ETH VLAN VLAN=>VF QUEUE
+ 1 0 0 i- ETH VLAN VLAN=>PF QUEUE
git.droids-corp.org / dpdk.git / blobdiff