help all : All of the above sections.
+Command File Functions
+----------------------
+
+To facilitate loading large number of commands or to avoid cutting and pasting where not
+practical or possible testpmd supports alternative methods for executing commands.
+
+* If started with the ``--cmdline-file=FILENAME`` command line argument testpmd
+ will execute all CLI commands contained within the file immediately before
+ starting packet forwarding or entering interactive mode.
+
+.. code-block:: console
+
+ ./testpmd -n4 -r2 ... -- -i --cmdline-file=/home/ubuntu/flow-create-commands.txt
+ Interactive-mode selected
+ CLI commands to be read from /home/ubuntu/flow-create-commands.txt
+ Configuring Port 0 (socket 0)
+ Port 0: 7C:FE:90:CB:74:CE
+ Configuring Port 1 (socket 0)
+ Port 1: 7C:FE:90:CB:74:CA
+ Checking link statuses...
+ Port 0 Link Up - speed 10000 Mbps - full-duplex
+ Port 1 Link Up - speed 10000 Mbps - full-duplex
+ Done
+ Flow rule #0 created
+ Flow rule #1 created
+ ...
+ ...
+ Flow rule #498 created
+ Flow rule #499 created
+ Read all CLI commands from /home/ubuntu/flow-create-commands.txt
+ testpmd>
+
+
+In all cases output from any included command will be displayed as standard output.
+Execution will continue until the end of the file is reached regardless of
+whether any errors occur. The end user must examine the output to determine if
+any failures occurred.
+
+
Control Functions
-----------------
testpmd> read txd 0 0 4
0x00000001 - 0x24C3C440 / 0x000F0000 - 0x2330003C
+show vf stats
+~~~~~~~~~~~~~
+
+Display VF statistics::
+
+ testpmd> show vf stats (port_id) (vf_id)
+
+clear vf stats
+~~~~~~~~~~~~~~
+
+Reset VF statistics::
+
+ testpmd> clear vf stats (port_id) (vf_id)
Configuration Functions
-----------------------
testpmd> set vf tx max-bandwidth (port_id) (vf_id) (max_bandwidth)
+set tc tx min bandwidth (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set all TCs' TX min relative bandwidth (%) for a VF from PF::
+
+ testpmd> set vf tc tx min-bandwidth (port_id) (vf_id) (bw1, bw2, ...)
+
+set tc tx max bandwidth (for VF)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set a TC's TX max absolute bandwidth (Mbps) for a VF from PF::
+
+ testpmd> set vf tc tx max-bandwidth (port_id) (vf_id) (tc_no) (max_bandwidth)
+
+set tc strict link priority mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Set some TCs' strict link priority mode on a physical port::
+
+ testpmd> set tx strict-link-priority (port_id) (tc_bitmap)
+
+set tc tx min bandwidth
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Set all TCs' TX min relative bandwidth (%) globally for all PF and VFs::
+
+ testpmd> set tc tx min-bandwidth (port_id) (bw1, bw2, ...)
+
set flow_ctrl rx
~~~~~~~~~~~~~~~~
Delete an E-tag forwarding filter on a port::
testpmd> E-tag set filter del e-tag-id (value) port (port_id)
+ptype mapping
+~~~~~~~~~~~~~
+
+List all items from the ptype mapping table::
+
+ testpmd> ptype mapping get (port_id) (valid_only)
+
+Where:
+
+* ``valid_only``: A flag indicates if only list valid items(=1) or all itemss(=0).
+
+Replace a specific or a group of software defined ptype with a new one::
+
+ testpmd> ptype mapping replace (port_id) (target) (mask) (pkt_type)
+
+where:
+
+* ``target``: A specific software ptype or a mask to represent a group of software ptypes.
+
+* ``mask``: A flag indicate if "target" is a specific software ptype(=0) or a ptype mask(=1).
+
+* ``pkt_type``: The new software ptype to replace the old ones.
+
+Update hardware defined ptype to software defined packet type mapping table::
+
+ testpmd> ptype mapping update (port_id) (hw_ptype) (sw_ptype)
+
+where:
+
+* ``hw_ptype``: hardware ptype as the index of the ptype mapping table.
+
+* ``sw_ptype``: software ptype as the value of the ptype mapping table.
+
+Reset ptype mapping table::
+
+ testpmd> ptype mapping reset (port_id)
Port Functions
--------------
testpmd> port config all crc-strip (on|off)
-CRC stripping is off by default.
+CRC stripping is on by default.
-The ``on`` option is equivalent to the ``--crc-strip`` command-line option.
+The ``off`` option is equivalent to the ``--disable-crc-strip`` command-line option.
port config - scatter
~~~~~~~~~~~~~~~~~~~~~~~
- ``vni {unsigned}``: VXLAN identifier.
+- ``e_tag``: match IEEE 802.1BR E-Tag header.
+
+ - ``grp_ecid_b {unsigned}``: GRP and E-CID base.
+
+- ``nvgre``: match NVGRE header.
+
+ - ``tni {unsigned}``: virtual subnet ID.
+
+- ``mpls``: match MPLS header.
+
+ - ``label {unsigned}``: MPLS label.
+
+- ``gre``: match GRE header.
+
+ - ``protocol {unsigned}``: protocol type.
+
Actions list
^^^^^^^^^^^^
5 0 1000 i- ETH IPV6 ICMP => QUEUE
7 63 0 i- ETH IPV6 UDP VXLAN => MARK QUEUE
testpmd>
+
+Sample QinQ flow rules
+~~~~~~~~~~~~~~~~~~~~~~
+
+Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.
+
+::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tpid is 0x8100 tci is 4 /
+ vlan tpid is 0x8100 tci is 5 / end actions vf id 1 / queue index 0 / end
+ Flow rule #0 validated
+
+ testpmd> flow create 0 ingress pattern eth / vlan tpid is 0x8100 tci is 4 /
+ vlan tpid is 0x8100 tci is 5 / end actions vf id 1 / queue index 0 / end
+ Flow rule #0 created
+
+ testpmd> flow list 0
+ ID Group Prio Attr Rule
+ 0 0 0 i- ETH VLAN VLAN=>VF QUEUE
+
+Validate and create a QinQ rule on port 0 to steer traffic to a queue on the host.
+
+::
+
+ testpmd> flow validate 0 ingress pattern eth / vlan tpid is 0x8100 tci is 6 /
+ vlan tpid is 0x8100 tci is 7 / end actions pf / queue index 0 / end
+ Flow rule #1 validated
+
+ testpmd> flow create 0 ingress pattern eth / vlan tpid is 0x8100 tci is 6 /
+ vlan tpid is 0x8100 tci is 7 / end actions pf / queue index 1 / end
+ Flow rule #1 created
+
+ testpmd> flow list 0
+ ID Group Prio Attr Rule
+ 0 0 0 i- ETH VLAN VLAN=>VF QUEUE
+ 1 0 0 i- ETH VLAN VLAN=>PF QUEUE
+
+After creating QinQ rule(s) the following command should be issued to enable QinQ::
+
+ testpmd> vlan set qinq on 0
+
git.droids-corp.org / dpdk.git / blobdiff