net/axgbe: support 1/2.5Gbps

[dpdk.git] / doc / guides / testpmd_app_ug / testpmd_funcs.rst

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 6779822..fbb3c5a 100644 (file)
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -487,6 +487,21 @@ set packet types classification for a specific port::
 
    testpmd> set port (port_id) ptypes_mask (mask)
 
+show port mac addresses info
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show mac addresses added for a specific port::
+
+   testpmd> show port (port_id) macs
+
+
+show port multicast mac addresses info
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Show multicast mac addresses added for a specific port::
+
+   testpmd> show port (port_id) mcast_macs
+
 show device info
 ~~~~~~~~~~~~~~~~
 
@@ -1718,8 +1733,7 @@ Enable or disable a per port Tx offloading on all Tx queues of a port::
                   sctp_cksum, tcp_tso, udp_tso, outer_ipv4_cksum,
                   qinq_insert, vxlan_tnl_tso, gre_tnl_tso,
                   ipip_tnl_tso, geneve_tnl_tso, macsec_insert,
-                  mt_lockfree, multi_segs, mbuf_fast_free, security,
-                  match_metadata
+                  mt_lockfree, multi_segs, mbuf_fast_free, security
 
 This command should be run when the port is stopped, or else it will fail.
 
@@ -2303,6 +2317,16 @@ testpmd will add this value to any Tx packet sent from this port::
 
    testpmd> port config (port_id) tx_metadata (value)
 
+port config dynf
+~~~~~~~~~~~~~~~~
+
+Set/clear dynamic flag per port.
+testpmd will register this flag in the mbuf (same registration
+for both Tx and Rx). Then set/clear this flag for each Tx
+packet sent from this port. The set bit only works for Tx packet::
+
+   testpmd> port config (port_id) dynf (name) (set|clear)
+
 port config mtu
 ~~~~~~~~~~~~~~~
 
@@ -3955,6 +3979,10 @@ This section lists supported pattern items and their attributes, if any.
 
   - ``proto_id {unsigned}``: PPP protocol identifier.
 
+- ``l2tpv3oip``: match L2TPv3 over IP header.
+
+  - ``session_id {unsigned}``: L2TPv3 over IP session identifier.
+
 Actions list
 ^^^^^^^^^^^^
 
@@ -4214,6 +4242,14 @@ This section lists supported actions and their attributes, if any.
 
   - ``value {unsigned}``: Value to decrease TCP acknowledgment number by.
 
+- ``set_ipv4_dscp``: Set IPv4 DSCP value with specified value
+
+  - ``dscp_value {unsigned}``: The new DSCP value to be set
+
+- ``set_ipv6_dscp``: Set IPv6 DSCP value with specified value
+
+  - ``dscp_value {unsigned}``: The new DSCP value to be set
+
 Destroying flow rules
 ~~~~~~~~~~~~~~~~~~~~~
 
@@ -4752,6 +4788,20 @@ Decapsulating VxLAN::
  testpmd> flow create 0 ingress pattern eth / ipv4 / udp / vxlan / eth / ipv4 /
         end actions raw_decap / queue index 0 / end
 
+Sample ESP rules
+~~~~~~~~~~~~~~~~
+
+ESP rules can be created by the following commands::
+
+ testpmd> flow create 0 ingress pattern eth / ipv4 / esp spi is 1 / end actions
+        queue index 3 / end
+ testpmd> flow create 0 ingress pattern eth / ipv4 / udp / esp spi is 1 / end
+        actions queue index 3 / end
+ testpmd> flow create 0 ingress pattern eth / ipv6 / esp spi is 1 / end actions
+        queue index 3 / end
+ testpmd> flow create 0 ingress pattern eth / ipv6 / udp / esp spi is 1 / end
+        actions queue index 3 / end
+
 BPF Functions
 --------------