These cycles are consumed by retries and inefficient API calls enqueuing and
dequeuing smaller bursts than specified by the cmdline parameter. This results
in a larger cycle-count measurement and should not be interpreted as an offload
-cost measurement.
+cost measurement. Using "pmd-cyclecount" mode will give a better idea of
+actual costs of hardware acceleration.
On hardware devices the throughput measurement is not necessarily the maximum
possible for the device, e.g. it may be necessary to use multiple cores to keep
throughput
latency
+ verify
+ pmd-cyclecount
* ``--silent``
Set the number of packets per burst.
+ This can be set as:
+ * Single value (i.e. ``--burst-sz 16``)
+ * Range of values, using the following structure ``min:inc:max``,
+ where ``min`` is minimum size, ``inc`` is the increment size and ``max``
+ is the maximum size (i.e. ``--burst-sz 16:2:32``)
+ * List of values, up to 32 values, separated in commas (i.e. ``--burst-sz 16,24,32``)
+
* ``--buffer-sz <n>``
Set the size of single packet (plaintext or ciphertext in it).
-* ``--segments-nb <n>``
+ This can be set as:
+ * Single value (i.e. ``--buffer-sz 16``)
+ * Range of values, using the following structure ``min:inc:max``,
+ where ``min`` is minimum size, ``inc`` is the increment size and ``max``
+ is the maximum size (i.e. ``--buffer-sz 16:2:32``)
+ * List of values, up to 32 values, separated in commas (i.e. ``--buffer-sz 32,64,128``)
+
- Set the number of segments per packet.
+* ``--segment-sz <n>``
+
+ Set the size of the segment to use, for Scatter Gather List testing.
+ By default, it is set to the size of the maximum buffer size, including the digest size,
+ so a single segment is created.
* ``--devtype <name>``
crypto_snow3g
crypto_kasumi
crypto_zuc
+ crypto_dpaa_sec
+ crypto_dpaa2_sec
+ crypto_armv8
+ crypto_scheduler
+ crypto_mrvl
* ``--optype <name>``
Enable out-of-place crypto operations mode.
-* ``--verify``
-
- Enable verify that all crypto operations were successful.
- The verification is done after the performance test.
-
* ``--test-file <name>``
Set test vector file path. See the Test Vector File chapter.
3des-ecb
3des-ctr
aes-cbc
- aes-ccm
aes-ctr
aes-ecb
- aes-gcm
aes-f8
aes-xts
arc4
3des-cbc
aes-cbc-mac
- aes-ccm
aes-cmac
- aes-gcm
aes-gmac
aes-xcbc-mac
md5
Set the size of authentication key.
-* ``--auth-digest-sz <n>``
+* ``--auth-iv-sz <n>``
+
+ Set the size of auth iv.
+
+* ``--aead-algo <name>``
+
+ Set AEAD algorithm name, where ``name`` is one
+ of the following::
+
+ aes-ccm
+ aes-gcm
+
+* ``--aead-op <mode>``
+
+ Set AEAD operation mode, where ``mode`` is one of
+ the following::
+
+ encrypt
+ decrypt
+
+* ``--aead-key-sz <n>``
+
+ Set the size of AEAD key.
+
+* ``--aead-iv-sz <n>``
- Set the size of authentication digest.
+ Set the size of AEAD iv.
-* ``--auth-aad-sz <n>``
+* ``--aead-aad-sz <n>``
- Set the size of authentication aad.
+ Set the size of AEAD aad.
+
+* ``--digest-sz <n>``
+
+ Set the size of digest.
+
+* ``--desc-nb <n>``
+
+ Set number of descriptors for each crypto device.
+
+* ``--pmd-cyclecount-delay-ms <n>``
+
+ Add a delay (in milliseconds) between enqueue and dequeue in
+ pmd-cyclecount benchmarking mode (useful when benchmarking
+ hardware acceleration).
* ``--csv-friendly``
The test vector file is a text file contain information about test vectors.
The file is made of the sections. The first section doesn't have header.
It contain global information used in each test variant vectors -
-typicaly information about plaintext, ciphertext, cipher key, aut key,
+typically information about plaintext, ciphertext, cipher key, aut key,
initial vector. All other sections begin header.
-The sections contain particular information typicaly digest.
+The sections contain particular information typically digest.
**Format of the file:**
Key used in auth operation.
-* ``iv``
+* ``cipher_iv``
+
+ Cipher Initial Vector.
+
+* ``auth_iv``
- Initial vector.
+ Auth Initial Vector.
* ``aad``
Call application for performance throughput test of single Aesni MB PMD
for cipher encryption aes-cbc and auth generation sha1-hmac,
-one milion operations, burst size 32, packet size 64::
+one million operations, burst size 32, packet size 64::
- dpdk-test-crypto-perf -l 6-7 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 --
+ dpdk-test-crypto-perf -l 6-7 --vdev crypto_aesni_mb -w 0000:00:00.0 --
--ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth
--cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo
- sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12
+ sha1-hmac --auth-op generate --auth-key-sz 64 --digest-sz 12
--total-ops 10000000 --burst-sz 32 --buffer-sz 64
Call application for performance latency test of two Aesni MB PMD executed
on two cores for cipher encryption aes-cbc, ten operations in silent mode::
- dpdk-test-crypto-perf -l 4-7 --vdev crypto_aesni_mb_pmd1
- --vdev crypto_aesni_mb_pmd2 -w 0000:00:00.0 -- --devtype crypto_aesni_mb
+ dpdk-test-crypto-perf -l 4-7 --vdev crypto_aesni_mb1
+ --vdev crypto_aesni_mb2 -w 0000:00:00.0 -- --devtype crypto_aesni_mb
--cipher-algo aes-cbc --cipher-key-sz 16 --cipher-iv-sz 16
--cipher-op encrypt --optype cipher-only --silent
--ptest latency --total-ops 10
-Call application for performance latency test of single open ssl PMD
+Call application for verification test of single open ssl PMD
for cipher encryption aes-gcm and auth generation aes-gcm,ten operations
in silent mode, test vector provide in file "test_aes_gcm.data"
with packet verification::
dpdk-test-crypto-perf -l 4-7 --vdev crypto_openssl -w 0000:00:00.0 --
- --devtype crypto_openssl --cipher-algo aes-gcm --cipher-key-sz 16
- --cipher-iv-sz 16 --cipher-op encrypt --auth-algo aes-gcm --auth-key-sz 16
- --auth-digest-sz 16 --auth-aad-sz 16 --auth-op generate --optype aead
- --silent --ptest latency --total-ops 10
- --test-file test_aes_gcm.data --verify
+ --devtype crypto_openssl --aead-algo aes-gcm --aead-key-sz 16
+ --aead-iv-sz 16 --aead-op encrypt --aead-aad-sz 16 --digest-sz 16
+ --optype aead --silent --ptest verify --total-ops 10
+ --test-file test_aes_gcm.data
Test vector file for cipher algorithm aes cbc 256 with authorization sha::
0xf5, 0x0c, 0xe7, 0xa2, 0xa6, 0x23, 0xd5, 0x3d, 0x95, 0xd8, 0xcd, 0x86, 0x79, 0xf5, 0x01, 0x47,
0x4f, 0xf9, 0x1d, 0x9d, 0x36, 0xf7, 0x68, 0x1a, 0x64, 0x44, 0x58, 0x5d, 0xe5, 0x81, 0x15, 0x2a,
0x41, 0xe4, 0x0e, 0xaa, 0x1f, 0x04, 0x21, 0xff, 0x2c, 0xf3, 0x73, 0x2b, 0x48, 0x1e, 0xd2, 0xf7
- iv =
+ cipher_iv =
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
# Section sha 1 hmac buff 32
[sha1_hmac_buff_32]
git.droids-corp.org / dpdk.git / blobdiff