=====================
Application for rte_flow performance testing.
+The application provide the ability to test insertion rate of specific
+rte_flow rule, by stressing it to the NIC, and calculate the insertion
+rate.
+
+The application offers some options in the command line, to configure
+which rule to apply.
+
+After that the application will start producing rules with same pattern
+but increasing the outer IP source address by 1 each time, thus it will
+give different flow each time, and all other items will have open masks.
+
+
+Known Limitations
+=================
+
+The current version has limitations which can be removed in future:
+
+* Support outer items up to tunnel layer only.
+* Single core insertion only.
+* Only one instance of same action can be added in one rule.
+
+The application also provide the ability to measure rte flow deletion rate,
+in addition to memory consumption before and after the flows creation.
+
+The app supports single and multi core performance measurements.
Compiling the Application
.. code-block:: console
- sudo ./dpdk-test-flow-perf -n 4 -w 08:00.0 --
+ sudo ./dpdk-test-flow_perf -n 4 -w 08:00.0 -- --ingress --ether --ipv4 --queue --flows-count=1000000
The command line options are:
* ``--help``
Display a help message and quit.
+
+* ``--flows-count=N``
+ Set the number of needed flows to insert,
+ where 1 <= N <= "number of flows".
+ The default value is 4,000,000.
+
+* ``--dump-iterations``
+ Print rates for each iteration of flows.
+ Default iteration is 1,00,000.
+
+* ``--deletion-rate``
+ Enable deletion rate calculations.
+
+* ``--dump-socket-mem``
+ Dump the memory stats for each socket before the insertion and after.
+
+* ``--enable-fwd``
+ Enable packets forwarding after insertion/deletion operations.
+
+
+Attributes:
+
+* ``--ingress``
+ Set Ingress attribute to all flows attributes.
+
+* ``--egress``
+ Set Egress attribute to all flows attributes.
+
+* ``--transfer``
+ Set Transfer attribute to all flows attributes.
+
+* ``--group=N``
+ Set group for all flows, where N >= 0.
+ Default group is 0.
+
+Items:
+
+* ``--ether``
+ Add Ether item to all flows items, This item have open mask.
+
+* ``--vlan``
+ Add VLAN item to all flows items,
+ This item have VLAN value defined in user_parameters.h
+ under ``VNI_VALUE`` with full mask, default value = 1.
+ Other fields are open mask.
+
+* ``--ipv4``
+ Add IPv4 item to all flows items,
+ This item have incremental source IP, with full mask.
+ Other fields are open mask.
+
+* ``--ipv6``
+ Add IPv6 item to all flows item,
+ This item have incremental source IP, with full mask.
+ Other fields are open mask.
+
+* ``--tcp``
+ Add TCP item to all flows items, This item have open mask.
+
+* ``--udp``
+ Add UDP item to all flows items, This item have open mask.
+
+* ``--vxlan``
+ Add VXLAN item to all flows items,
+ This item have VNI value defined in user_parameters.h
+ under ``VNI_VALUE`` with full mask, default value = 1.
+ Other fields are open mask.
+
+* ``--vxlan-gpe``
+ Add VXLAN-GPE item to all flows items,
+ This item have VNI value defined in user_parameters.h
+ under ``VNI_VALUE`` with full mask, default value = 1.
+ Other fields are open mask.
+
+* ``--gre``
+ Add GRE item to all flows items,
+ This item have protocol value defined in user_parameters.h
+ under ``GRE_PROTO`` with full mask, default protocol = 0x6558 "Ether"
+ Other fields are open mask.
+
+* ``--geneve``
+ Add GENEVE item to all flows items,
+ This item have VNI value defined in user_parameters.h
+ under ``VNI_VALUE`` with full mask, default value = 1.
+ Other fields are open mask.
+
+* ``--gtp``
+ Add GTP item to all flows items,
+ This item have TEID value defined in user_parameters.h
+ under ``TEID_VALUE`` with full mask, default value = 1.
+ Other fields are open mask.
+
+* ``--meta``
+ Add Meta item to all flows items,
+ This item have data value defined in user_parameters.h
+ under ``META_DATA`` with full mask, default value = 1.
+ Other fields are open mask.
+
+* ``--tag``
+ Add Tag item to all flows items,
+ This item have data value defined in user_parameters.h
+ under ``META_DATA`` with full mask, default value = 1.
+
+ Also it have tag value defined in user_parameters.h
+ under ``TAG_INDEX`` with full mask, default value = 0.
+ Other fields are open mask.
+
+
+Actions:
+
+* ``--port-id``
+ Add port redirection action to all flows actions.
+ Port redirection destination is defined in user_parameters.h
+ under PORT_ID_DST, default value = 1.
+
+* ``--rss``
+ Add RSS action to all flows actions,
+ The queues in RSS action will be all queues configured
+ in the app.
+
+* ``--queue``
+ Add queue action to all flows items,
+ The queue will change in round robin state for each flow.
+
+ For example:
+ The app running with 4 RX queues
+ Flow #0: queue index 0
+ Flow #1: queue index 1
+ Flow #2: queue index 2
+ Flow #3: queue index 3
+ Flow #4: queue index 0
+ ...
+
+* ``--jump``
+ Add jump action to all flows actions.
+ Jump action destination is defined in user_parameters.h
+ under ``JUMP_ACTION_TABLE``, default value = 2.
+
+* ``--mark``
+ Add mark action to all flows actions.
+ Mark action id is defined in user_parameters.h
+ under ``MARK_ID``, default value = 1.
+
+* ``--count``
+ Add count action to all flows actions.
+
+* ``--set-meta``
+ Add set-meta action to all flows actions.
+ Meta data is defined in user_parameters.h under ``META_DATA``
+ with full mask, default value = 1.
+
+* ``--set-tag``
+ Add set-tag action to all flows actions.
+ Meta data is defined in user_parameters.h under ``META_DATA``
+ with full mask, default value = 1.
+
+ Tag index is defined in user_parameters.h under ``TAG_INDEX``
+ with full mask, default value = 0.
+
+* ``--drop``
+ Add drop action to all flows actions.
+
+* ``--hairpin-queue=N``
+ Add hairpin queue action to all flows actions.
+ The queue will change in round robin state for each flow.
+
+ For example:
+ The app running with 4 RX hairpin queues and 4 normal RX queues
+ Flow #0: queue index 4
+ Flow #1: queue index 5
+ Flow #2: queue index 6
+ Flow #3: queue index 7
+ Flow #4: queue index 4
+ ...
+
+* ``--hairpin-rss=N``
+ Add hairpin RSS action to all flows actions.
+ The queues in RSS action will be all hairpin queues configured
+ in the app.
git.droids-corp.org / dpdk.git / blobdiff