verify functionality and measure the performance parameters of DPDK eventdev
devices.
-Compiling the Application
--------------------------
-
-**Build the application**
-
-Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the
-``dpdk-test-eventdev`` application.
-
-Initially, the user must select a DPDK target to choose the correct target type
-and compiler options to use when building the libraries.
-The user must have all libraries, modules, updates and compilers installed
-in the system prior to this,
-as described in the earlier chapters in this Getting Started Guide.
Running the Application
-----------------------
order_atq
perf_queue
perf_atq
+ pipeline_atq
+ pipeline_queue
* ``--socket_id <n>``
Use ethernet device as producer.
+* ``--prod_type_timerdev``
+
+ Use event timer adapter as producer.
+
+* ``--prod_type_timerdev_burst``
+
+ Use burst mode event timer adapter as producer.
+
+* ``--timer_tick_nsec``
+
+ Used to dictate number of nano seconds between bucket traversal of the
+ event timer adapter. Refer `rte_event_timer_adapter_conf`.
+
+* ``--max_tmo_nsec``
+
+ Used to configure event timer adapter max arm timeout in nano seconds.
+
+* ``--expiry_nsec``
+
+ Dictate the number of nano seconds after which the event timer expires.
+
+* ``--nb_timers``
+
+ Number of event timers each producer core will generate.
+
+* ``--nb_timer_adptrs``
+
+ Number of event timer adapters to be used. Each adapter is used in
+ round robin manner by the producer cores.
+
+* ``--deq_tmo_nsec``
+
+ Global dequeue timeout for all the event ports if the provided dequeue
+ timeout is out of the supported range of event device it will be
+ adjusted to the highest/lowest supported dequeue timeout supported.
+
+* ``--mbuf_sz``
+
+ Set packet mbuf size. Can be used to configure Jumbo Frames. Only
+ applicable for `pipeline_atq` and `pipeline_queue` tests.
+
+* ``--max_pkt_sz``
+
+ Set max packet mbuf size. Can be used configure Rx/Tx scatter gather.
+ Only applicable for `pipeline_atq` and `pipeline_queue` tests.
+
+
Eventdev Tests
--------------
--nb_flows
--nb_pkts
--worker_deq_depth
+ --deq_tmo_nsec
Example
^^^^^^^
.. code-block:: console
- sudo build/app/dpdk-test-eventdev --vdev=event_sw0 -- \
+ sudo <build_dir>/app/dpdk-test-eventdev --vdev=event_sw0 -- \
--test=order_queue --plcores 1 --wlcores 2,3
--nb_flows
--nb_pkts
--worker_deq_depth
+ --deq_tmo_nsec
Example
^^^^^^^
.. code-block:: console
- sudo build/app/dpdk-test-eventdev --vdev=event_octeontx -- \
+ sudo <build_dir>/app/dpdk-test-eventdev --vdev=event_octeontx -- \
--test=order_atq --plcores 1 --wlcores 2,3
--fwd_latency
--queue_priority
--prod_type_ethdev
+ --prod_type_timerdev_burst
+ --prod_type_timerdev
+ --timer_tick_nsec
+ --max_tmo_nsec
+ --expiry_nsec
+ --nb_timers
+ --nb_timer_adptrs
+ --deq_tmo_nsec
Example
^^^^^^^
.. code-block:: console
- sudo build/app/dpdk-test-eventdev -c 0xf -s 0x1 --vdev=event_sw0 -- \
+ sudo <build_dir>/app/dpdk-test-eventdev -c 0xf -s 0x1 --vdev=event_sw0 -- \
--test=perf_queue --plcores=2 --wlcore=3 --stlist=p --nb_pkts=0
Example command to run perf queue test with ethernet ports:
sudo build/app/dpdk-test-eventdev --vdev=event_sw0 -- \
--test=perf_queue --plcores=2 --wlcore=3 --stlist=p --prod_type_ethdev
+Example command to run perf queue test with event timer adapter:
+
+.. code-block:: console
+
+ sudo <build_dir>/app/dpdk-test-eventdev --vdev="event_octeontx" -- \
+ --wlcores 4 --plcores 12 --test perf_queue --stlist=a \
+ --prod_type_timerdev --fwd_latency
+
PERF_ATQ Test
~~~~~~~~~~~~~~~
--worker_deq_depth
--fwd_latency
--prod_type_ethdev
+ --prod_type_timerdev_burst
+ --prod_type_timerdev
+ --timer_tick_nsec
+ --max_tmo_nsec
+ --expiry_nsec
+ --nb_timers
+ --nb_timer_adptrs
+ --deq_tmo_nsec
Example
^^^^^^^
.. code-block:: console
- sudo build/app/dpdk-test-eventdev --vdev=event_octeontx -- \
+ sudo <build_dir>/app/dpdk-test-eventdev --vdev=event_octeontx -- \
--test=perf_atq --plcores=2 --wlcore=3 --stlist=p --nb_pkts=0
+Example command to run perf ``all types queue`` test with event timer adapter:
+
+.. code-block:: console
+
+ sudo <build_dir>/app/dpdk-test-eventdev --vdev="event_octeontx" -- \
+ --wlcores 4 --plcores 12 --test perf_atq --verbose 20 \
+ --stlist=a --prod_type_timerdev --fwd_latency
+
PIPELINE_QUEUE Test
~~~~~~~~~~~~~~~~~~~
+===+==============+================+=========================================+
| 1 | nb_queues | (nb_producers | Queues will be configured based on the |
| | | * nb_stages) + | user requested sched type list(--stlist)|
- | | | x | Here value of x is 1 in generic pipeline|
- | | | | and nb_producers in lockfree pipeline |
+ | | | nb_producers | At the last stage of the schedule list |
+ | | | | the event is enqueued onto per port |
+ | | | | unique queue which is then Transmitted. |
+---+--------------+----------------+-----------------------------------------+
| 2 | nb_producers | >= 1 | Producers will be configured based on |
| | | | the number of detected ethernet devices.|
| | | | argument |
+---+--------------+----------------+-----------------------------------------+
| 4 | nb_ports | nb_workers + | Workers use port 0 to port n. |
- | | | nb_producers | Producers use port n+1 to port n+m, |
- | | | | depending on the Rx adapter capability. |
+ | | | (nb_produces * | Producers use port n+1 to port n+m, |
+ | | | 2) | depending on the Rx adapter capability. |
+ | | | | Consumers use port n+m+1 to port n+o |
+ | | | | depending on the Tx adapter capability. |
+---+--------------+----------------+-----------------------------------------+
.. _figure_eventdev_pipeline_queue_test_generic:
.. figure:: img/eventdev_pipeline_queue_test_generic.*
-.. _figure_eventdev_pipeline_queue_test_lockfree:
+.. _figure_eventdev_pipeline_queue_test_internal_port:
-.. figure:: img/eventdev_pipeline_queue_test_lockfree.*
+.. figure:: img/eventdev_pipeline_queue_test_internal_port.*
pipeline queue test operation.
onto ethdev Tx queue else to maintain ordering the event type is set to
``atomic`` and enqueued onto the last stage queue.
-If the ethernet has ``DEV_TX_OFFLOAD_MT_LOCKFREE`` capability then the worker
-cores transmit the packets directly. Else the worker cores enqueue the packet
-onto the ``SINGLE_LINK_QUEUE`` that is managed by a Tx service. The Tx service
-dequeues the packet and transmits it.
+If the ethdev and eventdev pair have ``RTE_EVENT_ETH_TX_ADAPTER_CAP_INTERNAL_PORT``
+capability then the worker cores enqueue the packets to the eventdev directly
+using ``rte_event_eth_tx_adapter_enqueue`` else the worker cores enqueue the
+packet onto the ``SINGLE_LINK_QUEUE`` that is managed by the Tx adapter.
+The Tx adapter dequeues the packet and transmits it.
On packet Tx, application increments the number events processed and print
periodically in one second to get the number of events processed in one
--stlist
--worker_deq_depth
--prod_type_ethdev
+ --deq_tmo_nsec
.. Note::
.. code-block:: console
- sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
+ sudo <build_dir>/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
--test=pipeline_queue --wlcore=1 --prod_type_ethdev --stlist=a
+===+==============+================+=========================================+
| 1 | nb_queues | nb_producers + | Queues will be configured based on the |
| | | x | user requested sched type list(--stlist)|
- | | | | where x = 1 in generic pipeline and 0 |
- | | | | in lockfree pipeline |
+ | | | | where x = nb_producers in generic |
+ | | | | pipeline and 0 if all the ethdev |
+ | | | | being used have Internal port capability|
+---+--------------+----------------+-----------------------------------------+
| 2 | nb_producers | >= 1 | Producers will be configured based on |
| | | | the number of detected ethernet devices.|
| | | | argument |
+---+--------------+----------------+-----------------------------------------+
| 4 | nb_ports | nb_workers + | Workers use port 0 to port n. |
- | | | nb_producers | Producers use port n+1 to port n+m, |
- | | | | depending on the Rx adapter capability. |
+ | | | nb_producers + | Producers use port n+1 to port n+m, |
+ | | | x | depending on the Rx adapter capability. |
+ | | | | x = nb_producers in generic pipeline and|
+ | | | | 0 if all the ethdev being used have |
+ | | | | Internal port capability. |
+ | | | | Consumers may use port n+m+1 to port n+o|
+ | | | | depending on the Tx adapter capability. |
+---+--------------+----------------+-----------------------------------------+
.. _figure_eventdev_pipeline_atq_test_generic:
.. figure:: img/eventdev_pipeline_atq_test_generic.*
-.. _figure_eventdev_pipeline_atq_test_lockfree:
+.. _figure_eventdev_pipeline_atq_test_internal_port:
-.. figure:: img/eventdev_pipeline_atq_test_lockfree.*
+.. figure:: img/eventdev_pipeline_atq_test_internal_port.*
pipeline atq test operation.
--stlist
--worker_deq_depth
--prod_type_ethdev
+ --deq_tmo_nsec
.. Note::
.. code-block:: console
- sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
+ sudo <build_dir>/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
--test=pipeline_atq --wlcore=1 --prod_type_ethdev --stlist=a
git.droids-corp.org / dpdk.git / blobdiff