================
The MLX5 vDPA (vhost data path acceleration) driver library
-(**librte_pmd_mlx5_vdpa**) provides support for **Mellanox ConnectX-6**,
+(**librte_vdpa_mlx5**) provides support for **Mellanox ConnectX-6**,
**Mellanox ConnectX-6 Dx** and **Mellanox BlueField** families of
10/25/40/50/100/200 Gb/s adapters as well as their virtual functions (VF) in
SR-IOV context.
.. note::
- Due to external dependencies, this driver is disabled in default
- configuration of the "make" build. It can be enabled with
- ``CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD=y`` or by using "meson" build system which
+ This driver is enabled automatically when using "meson" build system which
will detect dependencies.
- DevX allows to access firmware objects
- Direct Rules manages flow steering at low-level hardware layer
-Enabling librte_pmd_mlx5_vdpa causes DPDK applications to be linked against
+Enabling librte_vdpa_mlx5 causes DPDK applications to be linked against
libibverbs.
A Mellanox mlx5 PCI device can be probed by either net/mlx5 driver or vdpa/mlx5
--------------
* Mellanox\ |reg| ConnectX\ |reg|-6 200G MCX654106A-HCAT (2x200G)
+* Mellanox\ |reg| ConnectX\ |reg|-6 Dx EN 25G MCX621102AN-ADAT (2x25G)
* Mellanox\ |reg| ConnectX\ |reg|-6 Dx EN 100G MCX623106AN-CDAT (2x100G)
* Mellanox\ |reg| ConnectX\ |reg|-6 Dx EN 200G MCX623105AN-VDAT (1x200G)
* Mellanox\ |reg| BlueField SmartNIC 25G MBF1M332A-ASCAT (2x25G)
- Mellanox OFED version: **5.0**
see :doc:`../../nics/mlx5` guide for more Mellanox OFED details.
-Compilation options
-~~~~~~~~~~~~~~~~~~~
+Compilation option
+~~~~~~~~~~~~~~~~~~
-These options can be modified in the ``.config`` file.
+The meson option ``ibverbs_link`` is **shared** by default,
+but can be configured to have the following values:
-- ``CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD`` (default **n**)
-
- Toggle compilation of librte_pmd_mlx5 itself.
-
-- ``CONFIG_RTE_IBVERBS_LINK_DLOPEN`` (default **n**)
+- ``dlopen``
Build PMD with additional code to make it loadable without hard
dependencies on **libibverbs** nor **libmlx5**, which may not be installed
In this mode, their presence is still required for it to run properly,
however their absence won't prevent a DPDK application from starting (with
- ``CONFIG_RTE_BUILD_SHARED_LIB`` disabled) and they won't show up as
- missing with ``ldd(1)``.
+ DPDK shared build disabled) and they won't show up as missing with ``ldd(1)``.
It works by moving these dependencies to a purpose-built rdma-core "glue"
- plug-in which must either be installed in a directory whose name is based
- on ``CONFIG_RTE_EAL_PMD_PATH`` suffixed with ``-glue`` if set, or in a
- standard location for the dynamic linker (e.g. ``/lib``) if left to the
- default empty string (``""``).
+ plug-in which must be installed in a directory whose name is based
+ on ``RTE_EAL_PMD_PATH`` suffixed with ``-glue``.
This option has no performance impact.
-- ``CONFIG_RTE_IBVERBS_LINK_STATIC`` (default **n**)
+- ``static``
Embed static flavor of the dependencies **libibverbs** and **libmlx5**
in the PMD shared library or the executable static binary.
.. note::
- For BlueField, target should be set to ``arm64-bluefield-linux-gcc``. This
- will enable ``CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD`` and set
- ``RTE_CACHE_LINE_SIZE`` to 64. Default armv8a configuration of make build and
- meson build set it to 128 then brings performance degradation.
+ Default armv8a configuration of meson build sets ``RTE_CACHE_LINE_SIZE``
+ to 128 then brings performance degradation.
Run-time configuration
~~~~~~~~~~~~~~~~~~~~~~
- 2, Completion queue scheduling will be managed by interrupts. Each CQ burst
arms the CQ in order to get an interrupt event in the next traffic burst.
- - Default mode is 0.
+ - Default mode is 1.
- ``event_us`` parameter [int]
- 0, A nonzero value to set timer step in micro-seconds. The timer thread
dynamic delay change steps according to this value. Default value is 1us.
- - 1, A nonzero value to set fixed timer delay in micro-seconds. Default value
- is 100us.
+ - 1, A value to set fixed timer delay in micro-seconds. Default value is 0us.
- ``no_traffic_time`` parameter [int]
driver to no-traffic mode. In this mode the timer events are stopped and
interrupts are configured to the device in order to notify traffic for the
driver. Default value is 2s.
+
+- ``event_core`` parameter [int]
+
+ CPU core number to set polling thread affinity to, default to control plane
+ cpu.
+
+- ``hw_latency_mode`` parameter [int]
+
+ The completion queue moderation mode:
+
+ - 0, HW default.
+
+ - 1, Latency is counted from the first packet completion report.
+
+ - 2, Latency is counted from the last packet completion.
+
+- ``hw_max_latency_us`` parameter [int]
+
+ - 1 - 4095, The maximum time in microseconds that packet completion report
+ can be delayed.
+
+ - 0, HW default.
+
+- ``hw_max_pending_comp`` parameter [int]
+
+ - 1 - 65535, The maximum number of pending packets completions in an HW queue.
+
+ - 0, HW default.
+
+
+Error handling
+^^^^^^^^^^^^^^
+
+Upon potential hardware errors, mlx5 PMD try to recover, give up if failed 3
+times in 3 seconds, virtq will be put in disable state. User should check log
+to get error information, or query vdpa statistics counter to know error type
+and count report.
git.droids-corp.org / dpdk.git / blobdiff