net/ice/base: add more capability to admin queue

[dpdk.git] / drivers / baseband / acc100 / rte_acc100_pmd.h

diff --git a/drivers/baseband/acc100/rte_acc100_pmd.h b/drivers/baseband/acc100/rte_acc100_pmd.h
index 6525d66..03ed0b3 100644 (file)
--- a/drivers/baseband/acc100/rte_acc100_pmd.h
+++ b/drivers/baseband/acc100/rte_acc100_pmd.h
@@ -7,6 +7,7 @@
 
 #include "acc100_pf_enum.h"
 #include "acc100_vf_enum.h"
+#include "rte_acc100_cfg.h"
 
 /* Helper macro for logging */
 #define rte_bbdev_log(level, fmt, ...) \
@@ -87,6 +88,8 @@
 #define ACC100_TMPL_PRI_3      0x0f0e0d0c
 #define ACC100_QUEUE_ENABLE    0x80000000  /* Bit to mark Queue as Enabled */
 #define ACC100_WORDS_IN_ARAM_SIZE (128 * 1024 / 4)
+#define ACC100_FDONE    0x80000000
+#define ACC100_SDONE    0x40000000
 
 #define ACC100_NUM_TMPL       32
 /* Mapping of signals for the available engines */
@@ -98,6 +101,13 @@
 #define ACC100_SIG_UL_4G_LAST 21
 #define ACC100_SIG_DL_4G      27
 #define ACC100_SIG_DL_4G_LAST 31
+#define ACC100_NUM_ACCS       5
+#define ACC100_ACCMAP_0       0
+#define ACC100_ACCMAP_1       2
+#define ACC100_ACCMAP_2       1
+#define ACC100_ACCMAP_3       3
+#define ACC100_ACCMAP_4       4
+#define ACC100_PF_VAL         2
 
 /* max number of iterations to allocate memory block for all rings */
 #define ACC100_SW_RING_MEM_ALLOC_ATTEMPTS 5
@@ -112,6 +122,9 @@
 #define ACC100_FCW_TD_BLEN                24
 #define ACC100_FCW_LE_BLEN                32
 #define ACC100_FCW_LD_BLEN                36
+#define ACC100_5GUL_SIZE_0                16
+#define ACC100_5GUL_SIZE_1                40
+#define ACC100_5GUL_OFFSET_0              36
 
 #define ACC100_FCW_VER         2
 #define ACC100_MUX_5GDL_DESC   6
@@ -145,6 +158,7 @@
 #define ACC100_RESET_HARD       0x1FF
 #define ACC100_ENGINES_MAX      9
 #define ACC100_LONG_WAIT        1000
+#define ACC100_GPEX_AXIMAP_NUM  17
 
 /* ACC100 DMA Descriptor triplet */
 struct acc100_dma_triplet {
@@ -394,6 +408,7 @@ struct __rte_packed acc100_dma_req_desc {
 union acc100_dma_desc {
        struct acc100_dma_req_desc req;
        union acc100_dma_rsp_desc rsp;
+       uint64_t atom_hdr;
 };
 
 
@@ -514,11 +529,74 @@ static const struct acc100_registry_addr vf_reg_addr = {
        .ddr_range = HWVfDmaDdrBaseRangeRoVf,
 };
 
+/* Structure associated with each queue. */
+struct __rte_cache_aligned acc100_queue {
+       union acc100_dma_desc *ring_addr;  /* Virtual address of sw ring */
+       rte_iova_t ring_addr_iova;  /* IOVA address of software ring */
+       uint32_t sw_ring_head;  /* software ring head */
+       uint32_t sw_ring_tail;  /* software ring tail */
+       /* software ring size (descriptors, not bytes) */
+       uint32_t sw_ring_depth;
+       /* mask used to wrap enqueued descriptors on the sw ring */
+       uint32_t sw_ring_wrap_mask;
+       /* MMIO register used to enqueue descriptors */
+       void *mmio_reg_enqueue;
+       uint8_t vf_id;  /* VF ID (max = 63) */
+       uint8_t qgrp_id;  /* Queue Group ID */
+       uint16_t aq_id;  /* Atomic Queue ID */
+       uint16_t aq_depth;  /* Depth of atomic queue */
+       uint32_t aq_enqueued;  /* Count how many "batches" have been enqueued */
+       uint32_t aq_dequeued;  /* Count how many "batches" have been dequeued */
+       uint32_t irq_enable;  /* Enable ops dequeue interrupts if set to 1 */
+       struct rte_mempool *fcw_mempool;  /* FCW mempool */
+       enum rte_bbdev_op_type op_type;  /* Type of this Queue: TE or TD */
+       /* Internal Buffers for loopback input */
+       uint8_t *lb_in;
+       uint8_t *lb_out;
+       rte_iova_t lb_in_addr_iova;
+       rte_iova_t lb_out_addr_iova;
+       struct acc100_device *d;
+};
+
 /* Private data structure for each ACC100 device */
 struct acc100_device {
        void *mmio_base;  /**< Base address of MMIO registers (BAR0) */
+       void *sw_rings_base;  /* Base addr of un-aligned memory for sw rings */
+       void *sw_rings;  /* 64MBs of 64MB aligned memory for sw rings */
+       rte_iova_t sw_rings_iova;  /* IOVA address of sw_rings */
+       /* Virtual address of the info memory routed to the this function under
+        * operation, whether it is PF or VF.
+        * HW may DMA information data at this location asynchronously
+        */
+       union acc100_info_ring_data *info_ring;
+
+       union acc100_harq_layout_data *harq_layout;
+       /* Virtual Info Ring head */
+       uint16_t info_ring_head;
+       /* Number of bytes available for each queue in device, depending on
+        * how many queues are enabled with configure()
+        */
+       uint32_t sw_ring_size;
+       uint32_t ddr_size; /* Size in kB */
+       uint32_t *tail_ptrs; /* Base address of response tail pointer buffer */
+       rte_iova_t tail_ptr_iova; /* IOVA address of tail pointers */
+       /* Max number of entries available for each queue in device, depending
+        * on how many queues are enabled with configure()
+        */
+       uint32_t sw_ring_max_depth;
+       struct rte_acc100_conf acc100_conf; /* ACC100 Initial configuration */
+       /* Bitmap capturing which Queues have already been assigned */
+       uint16_t q_assigned_bit_map[ACC100_NUM_QGRPS];
        bool pf_device; /**< True if this is a PF ACC100 device */
        bool configured; /**< True if this ACC100 device is configured */
 };
 
+/**
+ * Structure with details about RTE_BBDEV_EVENT_DEQUEUE event. It's passed to
+ * the callback function.
+ */
+struct acc100_deq_intr_details {
+       uint16_t queue_id;
+};
+
 #endif /* _RTE_ACC100_PMD_H_ */