-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#include <string.h>
#include <rte_bus.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
-#include <rte_eal_memconfig.h>
#include <rte_malloc.h>
#include <rte_devargs.h>
#include <rte_memcpy.h>
#include <rte_vfio.h>
-#include "eal_private.h"
#include "eal_filesystem.h"
#include "private.h"
extern struct rte_pci_bus rte_pci_bus;
static int
-pci_get_kernel_driver_by_path(const char *filename, char *dri_name)
+pci_get_kernel_driver_by_path(const char *filename, char *dri_name,
+ size_t len)
{
int count;
char path[PATH_MAX];
name = strrchr(path, '/');
if (name) {
- strncpy(dri_name, name + 1, strlen(name + 1) + 1);
+ strlcpy(dri_name, name + 1, len);
return 0;
}
/* try mapping the NIC resources using VFIO if it exists */
switch (dev->kdrv) {
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
#ifdef VFIO_PRESENT
if (pci_vfio_is_enabled())
ret = pci_vfio_map_resource(dev);
#endif
break;
- case RTE_KDRV_IGB_UIO:
- case RTE_KDRV_UIO_GENERIC:
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
if (rte_eal_using_phys_addrs()) {
/* map resources for devices that use uio */
ret = pci_uio_map_resource(dev);
{
/* try unmapping the NIC resources using VFIO if it exists */
switch (dev->kdrv) {
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
#ifdef VFIO_PRESENT
if (pci_vfio_is_enabled())
pci_vfio_unmap_resource(dev);
#endif
break;
- case RTE_KDRV_IGB_UIO:
- case RTE_KDRV_UIO_GENERIC:
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
/* unmap resources for devices that use uio */
pci_uio_unmap_resource(dev);
break;
}
}
-void *
-pci_find_max_end_va(void)
+static int
+find_max_end_va(const struct rte_memseg_list *msl, void *arg)
{
- const struct rte_memseg *seg = rte_eal_get_physmem_layout();
- const struct rte_memseg *last = seg;
- unsigned i = 0;
+ size_t sz = msl->len;
+ void *end_va = RTE_PTR_ADD(msl->base_va, sz);
+ void **max_va = arg;
- for (i = 0; i < RTE_MAX_MEMSEG; i++, seg++) {
- if (seg->addr == NULL)
- break;
+ if (*max_va < end_va)
+ *max_va = end_va;
+ return 0;
+}
- if (seg->addr > last->addr)
- last = seg;
+void *
+pci_find_max_end_va(void)
+{
+ void *va = NULL;
- }
- return RTE_PTR_ADD(last->addr, last->len);
+ rte_memseg_list_walk(find_max_end_va, &va);
+ return va;
}
+
/* parse one line of the "resource" sysfs file (note that the 'line'
* string is modified)
*/
return -1;
memset(dev, 0, sizeof(*dev));
+ dev->device.bus = &rte_pci_bus.bus;
dev->addr = *addr;
/* get vendor id */
/* parse driver */
snprintf(filename, sizeof(filename), "%s/driver", dirname);
- ret = pci_get_kernel_driver_by_path(filename, driver);
+ ret = pci_get_kernel_driver_by_path(filename, driver, sizeof(driver));
if (ret < 0) {
RTE_LOG(ERR, EAL, "Fail to get kernel driver\n");
free(dev);
if (!ret) {
if (!strcmp(driver, "vfio-pci"))
- dev->kdrv = RTE_KDRV_VFIO;
+ dev->kdrv = RTE_PCI_KDRV_VFIO;
else if (!strcmp(driver, "igb_uio"))
- dev->kdrv = RTE_KDRV_IGB_UIO;
+ dev->kdrv = RTE_PCI_KDRV_IGB_UIO;
else if (!strcmp(driver, "uio_pci_generic"))
- dev->kdrv = RTE_KDRV_UIO_GENERIC;
+ dev->kdrv = RTE_PCI_KDRV_UIO_GENERIC;
else
- dev->kdrv = RTE_KDRV_UNKNOWN;
- } else
- dev->kdrv = RTE_KDRV_NONE;
-
+ dev->kdrv = RTE_PCI_KDRV_UNKNOWN;
+ } else {
+ dev->kdrv = RTE_PCI_KDRV_NONE;
+ return 0;
+ }
/* device is valid, add in list (sorted) */
if (TAILQ_EMPTY(&rte_pci_bus.device_list)) {
rte_pci_add_device(dev);
int ret;
TAILQ_FOREACH(dev2, &rte_pci_bus.device_list, next) {
- ret = pci_addr_cmp(&dev->addr, &dev2->addr);
+ ret = rte_pci_addr_cmp(&dev->addr, &dev2->addr);
if (ret > 0)
continue;
if (ret < 0) {
rte_pci_insert_device(dev2, dev);
} else { /* already registered */
- dev2->kdrv = dev->kdrv;
- dev2->max_vfs = dev->max_vfs;
- pci_name_set(dev2);
- memmove(dev2->mem_resource, dev->mem_resource,
- sizeof(dev->mem_resource));
+ if (!rte_dev_is_probed(&dev2->device)) {
+ dev2->kdrv = dev->kdrv;
+ dev2->max_vfs = dev->max_vfs;
+ dev2->id = dev->id;
+ pci_name_set(dev2);
+ memmove(dev2->mem_resource,
+ dev->mem_resource,
+ sizeof(dev->mem_resource));
+ } else {
+ /**
+ * If device is plugged and driver is
+ * probed already, (This happens when
+ * we call rte_dev_probe which will
+ * scan all device on the bus) we don't
+ * need to do anything here unless...
+ **/
+ if (dev2->kdrv != dev->kdrv ||
+ dev2->max_vfs != dev->max_vfs ||
+ memcmp(&dev2->id, &dev->id, sizeof(dev2->id)))
+ /*
+ * This should not happens.
+ * But it is still possible if
+ * we unbind a device from
+ * vfio or uio before hotplug
+ * remove and rebind it with
+ * a different configure.
+ * So we just print out the
+ * error as an alarm.
+ */
+ RTE_LOG(ERR, EAL, "Unexpected device scan at %s!\n",
+ filename);
+ else if (dev2->device.devargs !=
+ dev->device.devargs) {
+ rte_devargs_remove(dev2->device.devargs);
+ pci_name_set(dev2);
+ }
+ }
free(dev);
}
return 0;
return 0;
}
-int
-pci_update_device(const struct rte_pci_addr *addr)
-{
- char filename[PATH_MAX];
-
- snprintf(filename, sizeof(filename), "%s/" PCI_PRI_FMT,
- pci_get_sysfs_path(), addr->domain, addr->bus, addr->devid,
- addr->function);
-
- return pci_scan_one(filename, addr);
-}
-
/*
* split up a pci address into its constituent parts.
*/
RTE_LOG(DEBUG, EAL, "VFIO PCI modules not loaded\n");
#endif
- dir = opendir(pci_get_sysfs_path());
+ dir = opendir(rte_pci_get_sysfs_path());
if (dir == NULL) {
RTE_LOG(ERR, EAL, "%s(): opendir failed: %s\n",
__func__, strerror(errno));
if (parse_pci_addr_format(e->d_name, sizeof(e->d_name), &addr) != 0)
continue;
+ if (rte_pci_ignore_device(&addr))
+ continue;
+
snprintf(dirname, sizeof(dirname), "%s/%s",
- pci_get_sysfs_path(), e->d_name);
+ rte_pci_get_sysfs_path(), e->d_name);
if (pci_scan_one(dirname, &addr) < 0)
goto error;
return -1;
}
-/*
- * Is pci device bound to any kdrv
- */
-static inline int
-pci_one_device_is_bound(void)
+#if defined(RTE_ARCH_X86)
+bool
+pci_device_iommu_support_va(const struct rte_pci_device *dev)
{
- struct rte_pci_device *dev = NULL;
- int ret = 0;
+#define VTD_CAP_MGAW_SHIFT 16
+#define VTD_CAP_MGAW_MASK (0x3fULL << VTD_CAP_MGAW_SHIFT)
+ const struct rte_pci_addr *addr = &dev->addr;
+ char filename[PATH_MAX];
+ FILE *fp;
+ uint64_t mgaw, vtd_cap_reg = 0;
- FOREACH_DEVICE_ON_PCIBUS(dev) {
- if (dev->kdrv == RTE_KDRV_UNKNOWN ||
- dev->kdrv == RTE_KDRV_NONE) {
- continue;
- } else {
- ret = 1;
- break;
- }
+ snprintf(filename, sizeof(filename),
+ "%s/" PCI_PRI_FMT "/iommu/intel-iommu/cap",
+ rte_pci_get_sysfs_path(), addr->domain, addr->bus, addr->devid,
+ addr->function);
+
+ fp = fopen(filename, "r");
+ if (fp == NULL) {
+ /* We don't have an Intel IOMMU, assume VA supported */
+ if (errno == ENOENT)
+ return true;
+
+ RTE_LOG(ERR, EAL, "%s(): can't open %s: %s\n",
+ __func__, filename, strerror(errno));
+ return false;
}
- return ret;
-}
-/*
- * Any one of the device bound to uio
- */
-static inline int
-pci_one_device_bound_uio(void)
+ /* We have an Intel IOMMU */
+ if (fscanf(fp, "%" PRIx64, &vtd_cap_reg) != 1) {
+ RTE_LOG(ERR, EAL, "%s(): can't read %s\n", __func__, filename);
+ fclose(fp);
+ return false;
+ }
+
+ fclose(fp);
+
+ mgaw = ((vtd_cap_reg & VTD_CAP_MGAW_MASK) >> VTD_CAP_MGAW_SHIFT) + 1;
+
+ /*
+ * Assuming there is no limitation by now. We can not know at this point
+ * because the memory has not been initialized yet. Setting the dma mask
+ * will force a check once memory initialization is done. We can not do
+ * a fallback to IOVA PA now, but if the dma check fails, the error
+ * message should advice for using '--iova-mode pa' if IOVA VA is the
+ * current mode.
+ */
+ rte_mem_set_dma_mask(mgaw);
+ return true;
+}
+#elif defined(RTE_ARCH_PPC_64)
+bool
+pci_device_iommu_support_va(__rte_unused const struct rte_pci_device *dev)
{
- struct rte_pci_device *dev = NULL;
+ /*
+ * IOMMU is always present on a PowerNV host (IOMMUv2).
+ * IOMMU is also present in a KVM/QEMU VM (IOMMUv1) but is not
+ * currently supported by DPDK. Test for our current environment
+ * and report VA support as appropriate.
+ */
- FOREACH_DEVICE_ON_PCIBUS(dev) {
- if (dev->kdrv == RTE_KDRV_IGB_UIO ||
- dev->kdrv == RTE_KDRV_UIO_GENERIC) {
- return 1;
- }
+ char *line = NULL;
+ size_t len = 0;
+ char filename[PATH_MAX] = "/proc/cpuinfo";
+ FILE *fp = fopen(filename, "r");
+ bool ret = false;
+
+ if (fp == NULL) {
+ RTE_LOG(ERR, EAL, "%s(): can't open %s: %s\n",
+ __func__, filename, strerror(errno));
+ return ret;
}
- return 0;
-}
-/*
- * Any one of the device has iova as va
- */
-static inline int
-pci_one_device_has_iova_va(void)
-{
- struct rte_pci_device *dev = NULL;
- struct rte_pci_driver *drv = NULL;
-
- FOREACH_DRIVER_ON_PCIBUS(drv) {
- if (drv && drv->drv_flags & RTE_PCI_DRV_IOVA_AS_VA) {
- FOREACH_DEVICE_ON_PCIBUS(dev) {
- if (dev->kdrv == RTE_KDRV_VFIO &&
- rte_pci_match(drv, dev))
- return 1;
- }
+ /* Check for a PowerNV platform */
+ while (getline(&line, &len, fp) != -1) {
+ if (strstr(line, "platform") != NULL)
+ continue;
+
+ if (strstr(line, "PowerNV") != NULL) {
+ RTE_LOG(DEBUG, EAL, "Running on a PowerNV system\n");
+ ret = true;
+ break;
}
}
- return 0;
+
+ free(line);
+ fclose(fp);
+ return ret;
}
+#else
+bool
+pci_device_iommu_support_va(__rte_unused const struct rte_pci_device *dev)
+{
+ return true;
+}
+#endif
-/*
- * Get iommu class of PCI devices on the bus.
- */
enum rte_iova_mode
-rte_pci_get_iommu_class(void)
+pci_device_iova_mode(const struct rte_pci_driver *pdrv,
+ const struct rte_pci_device *pdev)
{
- bool is_bound;
- bool is_vfio_noiommu_enabled = true;
- bool has_iova_va;
- bool is_bound_uio;
-
- is_bound = pci_one_device_is_bound();
- if (!is_bound)
- return RTE_IOVA_DC;
+ enum rte_iova_mode iova_mode = RTE_IOVA_DC;
- has_iova_va = pci_one_device_has_iova_va();
- is_bound_uio = pci_one_device_bound_uio();
+ switch (pdev->kdrv) {
+ case RTE_PCI_KDRV_VFIO: {
#ifdef VFIO_PRESENT
- is_vfio_noiommu_enabled = vfio_noiommu_is_enabled() == true ?
- true : false;
+ static int is_vfio_noiommu_enabled = -1;
+
+ if (is_vfio_noiommu_enabled == -1) {
+ if (rte_vfio_noiommu_is_enabled() == 1)
+ is_vfio_noiommu_enabled = 1;
+ else
+ is_vfio_noiommu_enabled = 0;
+ }
+ if (is_vfio_noiommu_enabled != 0)
+ iova_mode = RTE_IOVA_PA;
+ else if ((pdrv->drv_flags & RTE_PCI_DRV_NEED_IOVA_AS_VA) != 0)
+ iova_mode = RTE_IOVA_VA;
#endif
+ break;
+ }
- if (has_iova_va && !is_bound_uio && !is_vfio_noiommu_enabled)
- return RTE_IOVA_VA;
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
+ iova_mode = RTE_IOVA_PA;
+ break;
- if (has_iova_va) {
- RTE_LOG(WARNING, EAL, "Some devices want iova as va but pa will be used because.. ");
- if (is_vfio_noiommu_enabled)
- RTE_LOG(WARNING, EAL, "vfio-noiommu mode configured\n");
- if (is_bound_uio)
- RTE_LOG(WARNING, EAL, "few device bound to UIO\n");
+ default:
+ if ((pdrv->drv_flags & RTE_PCI_DRV_NEED_IOVA_AS_VA) != 0)
+ iova_mode = RTE_IOVA_VA;
+ break;
}
-
- return RTE_IOVA_PA;
+ return iova_mode;
}
/* Read PCI config space. */
int rte_pci_read_config(const struct rte_pci_device *device,
void *buf, size_t len, off_t offset)
{
+ char devname[RTE_DEV_NAME_MAX_LEN] = "";
const struct rte_intr_handle *intr_handle = &device->intr_handle;
- switch (intr_handle->type) {
- case RTE_INTR_HANDLE_UIO:
- case RTE_INTR_HANDLE_UIO_INTX:
+ switch (device->kdrv) {
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
return pci_uio_read_config(intr_handle, buf, len, offset);
-
#ifdef VFIO_PRESENT
- case RTE_INTR_HANDLE_VFIO_MSIX:
- case RTE_INTR_HANDLE_VFIO_MSI:
- case RTE_INTR_HANDLE_VFIO_LEGACY:
+ case RTE_PCI_KDRV_VFIO:
return pci_vfio_read_config(intr_handle, buf, len, offset);
#endif
default:
+ rte_pci_device_name(&device->addr, devname,
+ RTE_DEV_NAME_MAX_LEN);
RTE_LOG(ERR, EAL,
- "Unknown handle type of fd %d\n",
- intr_handle->fd);
+ "Unknown driver type for %s\n", devname);
return -1;
}
}
int rte_pci_write_config(const struct rte_pci_device *device,
const void *buf, size_t len, off_t offset)
{
+ char devname[RTE_DEV_NAME_MAX_LEN] = "";
const struct rte_intr_handle *intr_handle = &device->intr_handle;
- switch (intr_handle->type) {
- case RTE_INTR_HANDLE_UIO:
- case RTE_INTR_HANDLE_UIO_INTX:
+ switch (device->kdrv) {
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
return pci_uio_write_config(intr_handle, buf, len, offset);
-
#ifdef VFIO_PRESENT
- case RTE_INTR_HANDLE_VFIO_MSIX:
- case RTE_INTR_HANDLE_VFIO_MSI:
- case RTE_INTR_HANDLE_VFIO_LEGACY:
+ case RTE_PCI_KDRV_VFIO:
return pci_vfio_write_config(intr_handle, buf, len, offset);
#endif
default:
+ rte_pci_device_name(&device->addr, devname,
+ RTE_DEV_NAME_MAX_LEN);
RTE_LOG(ERR, EAL,
- "Unknown handle type of fd %d\n",
- intr_handle->fd);
- return -1;
- }
-}
-
-#if defined(RTE_ARCH_X86)
-static int
-pci_ioport_map(struct rte_pci_device *dev, int bar __rte_unused,
- struct rte_pci_ioport *p)
-{
- uint16_t start, end;
- FILE *fp;
- char *line = NULL;
- char pci_id[16];
- int found = 0;
- size_t linesz;
-
- snprintf(pci_id, sizeof(pci_id), PCI_PRI_FMT,
- dev->addr.domain, dev->addr.bus,
- dev->addr.devid, dev->addr.function);
-
- fp = fopen("/proc/ioports", "r");
- if (fp == NULL) {
- RTE_LOG(ERR, EAL, "%s(): can't open ioports\n", __func__);
+ "Unknown driver type for %s\n", devname);
return -1;
}
-
- while (getdelim(&line, &linesz, '\n', fp) > 0) {
- char *ptr = line;
- char *left;
- int n;
-
- n = strcspn(ptr, ":");
- ptr[n] = 0;
- left = &ptr[n + 1];
-
- while (*left && isspace(*left))
- left++;
-
- if (!strncmp(left, pci_id, strlen(pci_id))) {
- found = 1;
-
- while (*ptr && isspace(*ptr))
- ptr++;
-
- sscanf(ptr, "%04hx-%04hx", &start, &end);
-
- break;
- }
- }
-
- free(line);
- fclose(fp);
-
- if (!found)
- return -1;
-
- dev->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
- p->base = start;
- RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%x\n", start);
-
- return 0;
}
-#endif
int
rte_pci_ioport_map(struct rte_pci_device *dev, int bar,
switch (dev->kdrv) {
#ifdef VFIO_PRESENT
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
if (pci_vfio_is_enabled())
ret = pci_vfio_ioport_map(dev, bar, p);
break;
#endif
- case RTE_KDRV_IGB_UIO:
- ret = pci_uio_ioport_map(dev, bar, p);
- break;
- case RTE_KDRV_UIO_GENERIC:
-#if defined(RTE_ARCH_X86)
- ret = pci_ioport_map(dev, bar, p);
-#else
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
ret = pci_uio_ioport_map(dev, bar, p);
-#endif
- break;
- case RTE_KDRV_NONE:
-#if defined(RTE_ARCH_X86)
- ret = pci_ioport_map(dev, bar, p);
-#endif
break;
default:
break;
{
switch (p->dev->kdrv) {
#ifdef VFIO_PRESENT
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
pci_vfio_ioport_read(p, data, len, offset);
break;
#endif
- case RTE_KDRV_IGB_UIO:
- pci_uio_ioport_read(p, data, len, offset);
- break;
- case RTE_KDRV_UIO_GENERIC:
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
pci_uio_ioport_read(p, data, len, offset);
break;
- case RTE_KDRV_NONE:
-#if defined(RTE_ARCH_X86)
- pci_uio_ioport_read(p, data, len, offset);
-#endif
- break;
default:
break;
}
{
switch (p->dev->kdrv) {
#ifdef VFIO_PRESENT
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
pci_vfio_ioport_write(p, data, len, offset);
break;
#endif
- case RTE_KDRV_IGB_UIO:
- pci_uio_ioport_write(p, data, len, offset);
- break;
- case RTE_KDRV_UIO_GENERIC:
- pci_uio_ioport_write(p, data, len, offset);
- break;
- case RTE_KDRV_NONE:
-#if defined(RTE_ARCH_X86)
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
pci_uio_ioport_write(p, data, len, offset);
-#endif
break;
default:
break;
switch (p->dev->kdrv) {
#ifdef VFIO_PRESENT
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
if (pci_vfio_is_enabled())
ret = pci_vfio_ioport_unmap(p);
break;
#endif
- case RTE_KDRV_IGB_UIO:
- ret = pci_uio_ioport_unmap(p);
- break;
- case RTE_KDRV_UIO_GENERIC:
-#if defined(RTE_ARCH_X86)
- ret = 0;
-#else
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
ret = pci_uio_ioport_unmap(p);
-#endif
- break;
- case RTE_KDRV_NONE:
-#if defined(RTE_ARCH_X86)
- ret = 0;
-#endif
break;
default:
break;