#include <rte_bus.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
-#include <rte_eal_memconfig.h>
#include <rte_malloc.h>
#include <rte_devargs.h>
#include <rte_memcpy.h>
/* try mapping the NIC resources using VFIO if it exists */
switch (dev->kdrv) {
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
#ifdef VFIO_PRESENT
if (pci_vfio_is_enabled())
ret = pci_vfio_map_resource(dev);
#endif
break;
- case RTE_KDRV_IGB_UIO:
- case RTE_KDRV_UIO_GENERIC:
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
if (rte_eal_using_phys_addrs()) {
/* map resources for devices that use uio */
ret = pci_uio_map_resource(dev);
{
/* try unmapping the NIC resources using VFIO if it exists */
switch (dev->kdrv) {
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
#ifdef VFIO_PRESENT
if (pci_vfio_is_enabled())
pci_vfio_unmap_resource(dev);
#endif
break;
- case RTE_KDRV_IGB_UIO:
- case RTE_KDRV_UIO_GENERIC:
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
/* unmap resources for devices that use uio */
pci_uio_unmap_resource(dev);
break;
if (!ret) {
if (!strcmp(driver, "vfio-pci"))
- dev->kdrv = RTE_KDRV_VFIO;
+ dev->kdrv = RTE_PCI_KDRV_VFIO;
else if (!strcmp(driver, "igb_uio"))
- dev->kdrv = RTE_KDRV_IGB_UIO;
+ dev->kdrv = RTE_PCI_KDRV_IGB_UIO;
else if (!strcmp(driver, "uio_pci_generic"))
- dev->kdrv = RTE_KDRV_UIO_GENERIC;
+ dev->kdrv = RTE_PCI_KDRV_UIO_GENERIC;
else
- dev->kdrv = RTE_KDRV_UNKNOWN;
- } else
- dev->kdrv = RTE_KDRV_NONE;
-
+ dev->kdrv = RTE_PCI_KDRV_UNKNOWN;
+ } else {
+ dev->kdrv = RTE_PCI_KDRV_NONE;
+ return 0;
+ }
/* device is valid, add in list (sorted) */
if (TAILQ_EMPTY(&rte_pci_bus.device_list)) {
rte_pci_add_device(dev);
if (!rte_dev_is_probed(&dev2->device)) {
dev2->kdrv = dev->kdrv;
dev2->max_vfs = dev->max_vfs;
+ dev2->id = dev->id;
pci_name_set(dev2);
memmove(dev2->mem_resource,
dev->mem_resource,
* need to do anything here unless...
**/
if (dev2->kdrv != dev->kdrv ||
- dev2->max_vfs != dev->max_vfs)
+ dev2->max_vfs != dev->max_vfs ||
+ memcmp(&dev2->id, &dev->id, sizeof(dev2->id)))
/*
* This should not happens.
* But it is still possible if
*/
RTE_LOG(ERR, EAL, "Unexpected device scan at %s!\n",
filename);
+ else if (dev2->device.devargs !=
+ dev->device.devargs) {
+ rte_devargs_remove(dev2->device.devargs);
+ pci_name_set(dev2);
+ }
}
free(dev);
}
return 0;
}
-int
-pci_update_device(const struct rte_pci_addr *addr)
-{
- char filename[PATH_MAX];
-
- snprintf(filename, sizeof(filename), "%s/" PCI_PRI_FMT,
- rte_pci_get_sysfs_path(), addr->domain, addr->bus, addr->devid,
- addr->function);
-
- return pci_scan_one(filename, addr);
-}
-
/*
* split up a pci address into its constituent parts.
*/
if (parse_pci_addr_format(e->d_name, sizeof(e->d_name), &addr) != 0)
continue;
+ if (rte_pci_ignore_device(&addr))
+ continue;
+
snprintf(dirname, sizeof(dirname), "%s/%s",
rte_pci_get_sysfs_path(), e->d_name);
}
#if defined(RTE_ARCH_X86)
-static bool
-pci_one_device_iommu_support_va(const struct rte_pci_device *dev)
+bool
+pci_device_iommu_support_va(const struct rte_pci_device *dev)
{
#define VTD_CAP_MGAW_SHIFT 16
#define VTD_CAP_MGAW_MASK (0x3fULL << VTD_CAP_MGAW_SHIFT)
"%s/" PCI_PRI_FMT "/iommu/intel-iommu/cap",
rte_pci_get_sysfs_path(), addr->domain, addr->bus, addr->devid,
addr->function);
- if (access(filename, F_OK) == -1) {
- /* We don't have an Intel IOMMU, assume VA supported*/
- return true;
- }
- /* We have an intel IOMMU */
fp = fopen(filename, "r");
if (fp == NULL) {
- RTE_LOG(ERR, EAL, "%s(): can't open %s\n", __func__, filename);
+ /* We don't have an Intel IOMMU, assume VA supported */
+ if (errno == ENOENT)
+ return true;
+
+ RTE_LOG(ERR, EAL, "%s(): can't open %s: %s\n",
+ __func__, filename, strerror(errno));
return false;
}
+ /* We have an Intel IOMMU */
if (fscanf(fp, "%" PRIx64, &vtd_cap_reg) != 1) {
RTE_LOG(ERR, EAL, "%s(): can't read %s\n", __func__, filename);
fclose(fp);
return true;
}
#elif defined(RTE_ARCH_PPC_64)
-static bool
-pci_one_device_iommu_support_va(__rte_unused const struct rte_pci_device *dev)
+bool
+pci_device_iommu_support_va(__rte_unused const struct rte_pci_device *dev)
{
- return false;
+ /*
+ * IOMMU is always present on a PowerNV host (IOMMUv2).
+ * IOMMU is also present in a KVM/QEMU VM (IOMMUv1) but is not
+ * currently supported by DPDK. Test for our current environment
+ * and report VA support as appropriate.
+ */
+
+ char *line = NULL;
+ size_t len = 0;
+ char filename[PATH_MAX] = "/proc/cpuinfo";
+ FILE *fp = fopen(filename, "r");
+ bool ret = false;
+
+ if (fp == NULL) {
+ RTE_LOG(ERR, EAL, "%s(): can't open %s: %s\n",
+ __func__, filename, strerror(errno));
+ return ret;
+ }
+
+ /* Check for a PowerNV platform */
+ while (getline(&line, &len, fp) != -1) {
+ if (strstr(line, "platform") != NULL)
+ continue;
+
+ if (strstr(line, "PowerNV") != NULL) {
+ RTE_LOG(DEBUG, EAL, "Running on a PowerNV system\n");
+ ret = true;
+ break;
+ }
+ }
+
+ free(line);
+ fclose(fp);
+ return ret;
}
#else
-static bool
-pci_one_device_iommu_support_va(__rte_unused const struct rte_pci_device *dev)
+bool
+pci_device_iommu_support_va(__rte_unused const struct rte_pci_device *dev)
{
return true;
}
const struct rte_pci_device *pdev)
{
enum rte_iova_mode iova_mode = RTE_IOVA_DC;
- static int iommu_no_va = -1;
switch (pdev->kdrv) {
- case RTE_KDRV_VFIO: {
+ case RTE_PCI_KDRV_VFIO: {
#ifdef VFIO_PRESENT
static int is_vfio_noiommu_enabled = -1;
break;
}
- case RTE_KDRV_IGB_UIO:
- case RTE_KDRV_UIO_GENERIC:
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
iova_mode = RTE_IOVA_PA;
break;
iova_mode = RTE_IOVA_VA;
break;
}
-
- if (iova_mode != RTE_IOVA_PA) {
- /*
- * We can check this only once, because the IOMMU hardware is
- * the same for all of them.
- */
- if (iommu_no_va == -1)
- iommu_no_va = pci_one_device_iommu_support_va(pdev)
- ? 0 : 1;
- if (iommu_no_va != 0)
- iova_mode = RTE_IOVA_PA;
- }
return iova_mode;
}
const struct rte_intr_handle *intr_handle = &device->intr_handle;
switch (device->kdrv) {
- case RTE_KDRV_IGB_UIO:
- case RTE_KDRV_UIO_GENERIC:
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
return pci_uio_read_config(intr_handle, buf, len, offset);
#ifdef VFIO_PRESENT
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
return pci_vfio_read_config(intr_handle, buf, len, offset);
#endif
default:
const struct rte_intr_handle *intr_handle = &device->intr_handle;
switch (device->kdrv) {
- case RTE_KDRV_IGB_UIO:
- case RTE_KDRV_UIO_GENERIC:
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
return pci_uio_write_config(intr_handle, buf, len, offset);
#ifdef VFIO_PRESENT
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
return pci_vfio_write_config(intr_handle, buf, len, offset);
#endif
default:
}
}
-#if defined(RTE_ARCH_X86)
-static int
-pci_ioport_map(struct rte_pci_device *dev, int bar __rte_unused,
- struct rte_pci_ioport *p)
-{
- uint16_t start, end;
- FILE *fp;
- char *line = NULL;
- char pci_id[16];
- int found = 0;
- size_t linesz;
-
- snprintf(pci_id, sizeof(pci_id), PCI_PRI_FMT,
- dev->addr.domain, dev->addr.bus,
- dev->addr.devid, dev->addr.function);
-
- fp = fopen("/proc/ioports", "r");
- if (fp == NULL) {
- RTE_LOG(ERR, EAL, "%s(): can't open ioports\n", __func__);
- return -1;
- }
-
- while (getdelim(&line, &linesz, '\n', fp) > 0) {
- char *ptr = line;
- char *left;
- int n;
-
- n = strcspn(ptr, ":");
- ptr[n] = 0;
- left = &ptr[n + 1];
-
- while (*left && isspace(*left))
- left++;
-
- if (!strncmp(left, pci_id, strlen(pci_id))) {
- found = 1;
-
- while (*ptr && isspace(*ptr))
- ptr++;
-
- sscanf(ptr, "%04hx-%04hx", &start, &end);
-
- break;
- }
- }
-
- free(line);
- fclose(fp);
-
- if (!found)
- return -1;
-
- p->base = start;
- RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%x\n", start);
-
- return 0;
-}
-#endif
-
int
rte_pci_ioport_map(struct rte_pci_device *dev, int bar,
struct rte_pci_ioport *p)
switch (dev->kdrv) {
#ifdef VFIO_PRESENT
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
if (pci_vfio_is_enabled())
ret = pci_vfio_ioport_map(dev, bar, p);
break;
#endif
- case RTE_KDRV_IGB_UIO:
- ret = pci_uio_ioport_map(dev, bar, p);
- break;
- case RTE_KDRV_UIO_GENERIC:
-#if defined(RTE_ARCH_X86)
- ret = pci_ioport_map(dev, bar, p);
-#else
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
ret = pci_uio_ioport_map(dev, bar, p);
-#endif
- break;
- case RTE_KDRV_NONE:
-#if defined(RTE_ARCH_X86)
- ret = pci_ioport_map(dev, bar, p);
-#endif
break;
default:
break;
{
switch (p->dev->kdrv) {
#ifdef VFIO_PRESENT
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
pci_vfio_ioport_read(p, data, len, offset);
break;
#endif
- case RTE_KDRV_IGB_UIO:
- pci_uio_ioport_read(p, data, len, offset);
- break;
- case RTE_KDRV_UIO_GENERIC:
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
pci_uio_ioport_read(p, data, len, offset);
break;
- case RTE_KDRV_NONE:
-#if defined(RTE_ARCH_X86)
- pci_uio_ioport_read(p, data, len, offset);
-#endif
- break;
default:
break;
}
{
switch (p->dev->kdrv) {
#ifdef VFIO_PRESENT
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
pci_vfio_ioport_write(p, data, len, offset);
break;
#endif
- case RTE_KDRV_IGB_UIO:
- pci_uio_ioport_write(p, data, len, offset);
- break;
- case RTE_KDRV_UIO_GENERIC:
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
pci_uio_ioport_write(p, data, len, offset);
break;
- case RTE_KDRV_NONE:
-#if defined(RTE_ARCH_X86)
- pci_uio_ioport_write(p, data, len, offset);
-#endif
- break;
default:
break;
}
switch (p->dev->kdrv) {
#ifdef VFIO_PRESENT
- case RTE_KDRV_VFIO:
+ case RTE_PCI_KDRV_VFIO:
if (pci_vfio_is_enabled())
ret = pci_vfio_ioport_unmap(p);
break;
#endif
- case RTE_KDRV_IGB_UIO:
- ret = pci_uio_ioport_unmap(p);
- break;
- case RTE_KDRV_UIO_GENERIC:
-#if defined(RTE_ARCH_X86)
- ret = 0;
-#else
+ case RTE_PCI_KDRV_IGB_UIO:
+ case RTE_PCI_KDRV_UIO_GENERIC:
ret = pci_uio_ioport_unmap(p);
-#endif
- break;
- case RTE_KDRV_NONE:
-#if defined(RTE_ARCH_X86)
- ret = 0;
-#endif
break;
default:
break;