#ifndef ECORE_REG_H
#define ECORE_REG_H
-
-#define ATC_ATC_INT_STS_REG_ADDRESS_ERROR \
- (0x1<<0)
-#define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS \
- (0x1<<2)
-#define ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU \
- (0x1<<5)
-#define ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT \
- (0x1<<3)
-#define ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR \
- (0x1<<4)
-#define ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND \
- (0x1<<1)
-#define ATC_REG_ATC_INIT_DONE \
- 0x1100bcUL
-#define ATC_REG_ATC_INT_STS_CLR \
- 0x1101c0UL
-#define ATC_REG_ATC_PRTY_MASK \
- 0x1101d8UL
-#define ATC_REG_ATC_PRTY_STS_CLR \
- 0x1101d0UL
-#define BRB1_REG_BRB1_INT_MASK \
- 0x60128UL
-#define BRB1_REG_BRB1_PRTY_MASK \
- 0x60138UL
-#define BRB1_REG_BRB1_PRTY_STS_CLR \
- 0x60130UL
-#define BRB1_REG_MAC_GUARANTIED_0 \
- 0x601e8UL
-#define BRB1_REG_MAC_GUARANTIED_1 \
- 0x60240UL
-#define BRB1_REG_NUM_OF_FULL_BLOCKS \
- 0x60090UL
-#define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 \
- 0x60078UL
-#define BRB1_REG_PAUSE_LOW_THRESHOLD_0 \
- 0x60068UL
-#define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 \
- 0x60094UL
-#define CCM_REG_CCM_INT_MASK \
- 0xd01e4UL
-#define CCM_REG_CCM_PRTY_MASK \
- 0xd01f4UL
-#define CCM_REG_CCM_PRTY_STS_CLR \
- 0xd01ecUL
-#define CDU_REG_CDU_GLOBAL_PARAMS \
- 0x101020UL
-#define CDU_REG_CDU_INT_MASK \
- 0x10103cUL
-#define CDU_REG_CDU_PRTY_MASK \
- 0x10104cUL
-#define CDU_REG_CDU_PRTY_STS_CLR \
- 0x101044UL
-#define CFC_REG_AC_INIT_DONE \
- 0x104078UL
-#define CFC_REG_CAM_INIT_DONE \
- 0x10407cUL
-#define CFC_REG_CFC_INT_MASK \
- 0x104108UL
-#define CFC_REG_CFC_INT_STS_CLR \
- 0x104100UL
-#define CFC_REG_CFC_PRTY_MASK \
- 0x104118UL
-#define CFC_REG_CFC_PRTY_STS_CLR \
- 0x104110UL
-#define CFC_REG_DEBUG0 \
- 0x104050UL
-#define CFC_REG_INIT_REG \
- 0x10404cUL
-#define CFC_REG_LL_INIT_DONE \
- 0x104074UL
-#define CFC_REG_NUM_LCIDS_INSIDE_PF \
- 0x104120UL
-#define CFC_REG_STRONG_ENABLE_PF \
- 0x104128UL
-#define CFC_REG_WEAK_ENABLE_PF \
- 0x104124UL
-#define CSDM_REG_CSDM_INT_MASK_0 \
- 0xc229cUL
-#define CSDM_REG_CSDM_INT_MASK_1 \
- 0xc22acUL
-#define CSDM_REG_CSDM_PRTY_MASK \
- 0xc22bcUL
-#define CSDM_REG_CSDM_PRTY_STS_CLR \
- 0xc22b4UL
-#define CSEM_REG_CSEM_INT_MASK_0 \
- 0x200110UL
-#define CSEM_REG_CSEM_INT_MASK_1 \
- 0x200120UL
-#define CSEM_REG_CSEM_PRTY_MASK_0 \
- 0x200130UL
-#define CSEM_REG_CSEM_PRTY_MASK_1 \
- 0x200140UL
-#define CSEM_REG_CSEM_PRTY_STS_CLR_0 \
- 0x200128UL
-#define CSEM_REG_CSEM_PRTY_STS_CLR_1 \
- 0x200138UL
-#define CSEM_REG_FAST_MEMORY \
- 0x220000UL
-#define CSEM_REG_INT_TABLE \
- 0x200400UL
-#define CSEM_REG_PASSIVE_BUFFER \
- 0x202000UL
-#define CSEM_REG_PRAM \
- 0x240000UL
-#define CSEM_REG_VFPF_ERR_NUM \
- 0x200380UL
-#define DBG_REG_DBG_PRTY_MASK \
- 0xc0a8UL
-#define DBG_REG_DBG_PRTY_STS_CLR \
- 0xc0a0UL
-#define DMAE_REG_BACKWARD_COMP_EN \
- 0x10207cUL
-#define DMAE_REG_CMD_MEM \
- 0x102400UL
-#define DMAE_REG_DMAE_INT_MASK \
- 0x102054UL
-#define DMAE_REG_DMAE_PRTY_MASK \
- 0x102064UL
-#define DMAE_REG_DMAE_PRTY_STS_CLR \
- 0x10205cUL
-#define DMAE_REG_GO_C0 \
- 0x102080UL
-#define DMAE_REG_GO_C1 \
- 0x102084UL
-#define DMAE_REG_GO_C10 \
- 0x102088UL
-#define DMAE_REG_GO_C11 \
- 0x10208cUL
-#define DMAE_REG_GO_C12 \
- 0x102090UL
-#define DMAE_REG_GO_C13 \
- 0x102094UL
-#define DMAE_REG_GO_C14 \
- 0x102098UL
-#define DMAE_REG_GO_C15 \
- 0x10209cUL
-#define DMAE_REG_GO_C2 \
- 0x1020a0UL
-#define DMAE_REG_GO_C3 \
- 0x1020a4UL
-#define DMAE_REG_GO_C4 \
- 0x1020a8UL
-#define DMAE_REG_GO_C5 \
- 0x1020acUL
-#define DMAE_REG_GO_C6 \
- 0x1020b0UL
-#define DMAE_REG_GO_C7 \
- 0x1020b4UL
-#define DMAE_REG_GO_C8 \
- 0x1020b8UL
-#define DMAE_REG_GO_C9 \
- 0x1020bcUL
-#define DORQ_REG_DORQ_INT_MASK \
- 0x170180UL
-#define DORQ_REG_DORQ_INT_STS_CLR \
- 0x170178UL
-#define DORQ_REG_DORQ_PRTY_MASK \
- 0x170190UL
-#define DORQ_REG_DORQ_PRTY_STS_CLR \
- 0x170188UL
-#define DORQ_REG_DPM_CID_OFST \
- 0x170030UL
-#define DORQ_REG_MAX_RVFID_SIZE \
- 0x1701ecUL
-#define DORQ_REG_NORM_CID_OFST \
- 0x17002cUL
-#define DORQ_REG_PF_USAGE_CNT \
- 0x1701d0UL
-#define DORQ_REG_VF_NORM_CID_BASE \
- 0x1701a0UL
-#define DORQ_REG_VF_NORM_CID_OFST \
- 0x1701f4UL
-#define DORQ_REG_VF_NORM_CID_WND_SIZE \
- 0x1701a4UL
-#define DORQ_REG_VF_NORM_MAX_CID_COUNT \
- 0x1701e4UL
-#define DORQ_REG_VF_NORM_VF_BASE \
- 0x1701a8UL
-#define DORQ_REG_VF_TYPE_MASK_0 \
- 0x170218UL
-#define DORQ_REG_VF_TYPE_MAX_MCID_0 \
- 0x1702d8UL
-#define DORQ_REG_VF_TYPE_MIN_MCID_0 \
- 0x170298UL
-#define DORQ_REG_VF_TYPE_VALUE_0 \
- 0x170258UL
-#define DORQ_REG_VF_USAGE_CNT \
- 0x170320UL
-#define DORQ_REG_VF_USAGE_CT_LIMIT \
- 0x170340UL
-#define HC_CONFIG_0_REG_ATTN_BIT_EN_0 \
- (0x1<<4)
-#define HC_CONFIG_0_REG_BLOCK_DISABLE_0 \
- (0x1<<0)
-#define HC_CONFIG_0_REG_INT_LINE_EN_0 \
- (0x1<<3)
-#define HC_CONFIG_0_REG_MSI_ATTN_EN_0 \
- (0x1<<7)
-#define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 \
- (0x1<<2)
-#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 \
- (0x1<<1)
-#define HC_CONFIG_1_REG_BLOCK_DISABLE_1 \
- (0x1<<0)
-#define HC_REG_ATTN_MSG0_ADDR_L \
- 0x108018UL
-#define HC_REG_ATTN_MSG1_ADDR_L \
- 0x108020UL
-#define HC_REG_COMMAND_REG \
- 0x108180UL
-#define HC_REG_CONFIG_0 \
- 0x108000UL
-#define HC_REG_CONFIG_1 \
- 0x108004UL
-#define HC_REG_HC_PRTY_MASK \
- 0x1080a0UL
-#define HC_REG_HC_PRTY_STS_CLR \
- 0x108098UL
-#define HC_REG_INT_MASK \
- 0x108108UL
-#define HC_REG_LEADING_EDGE_0 \
- 0x108040UL
-#define HC_REG_MAIN_MEMORY \
- 0x108800UL
-#define HC_REG_MAIN_MEMORY_SIZE \
- 152
-#define HC_REG_TRAILING_EDGE_0 \
- 0x108044UL
-#define IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN \
- (0x1<<1)
-#define IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE \
- (0x1<<0)
-#define IGU_REG_ATTENTION_ACK_BITS \
- 0x130108UL
-#define IGU_REG_ATTN_MSG_ADDR_H \
- 0x13011cUL
-#define IGU_REG_ATTN_MSG_ADDR_L \
- 0x130120UL
-#define IGU_REG_BLOCK_CONFIGURATION \
- 0x130000UL
-#define IGU_REG_COMMAND_REG_32LSB_DATA \
- 0x130124UL
-#define IGU_REG_COMMAND_REG_CTRL \
- 0x13012cUL
-#define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP \
- 0x130200UL
-#define IGU_REG_IGU_PRTY_MASK \
- 0x1300a8UL
-#define IGU_REG_IGU_PRTY_STS_CLR \
- 0x1300a0UL
-#define IGU_REG_LEADING_EDGE_LATCH \
- 0x130134UL
-#define IGU_REG_MAPPING_MEMORY \
- 0x131000UL
-#define IGU_REG_MAPPING_MEMORY_SIZE \
- 136
-#define IGU_REG_PBA_STATUS_LSB \
- 0x130138UL
-#define IGU_REG_PBA_STATUS_MSB \
- 0x13013cUL
-#define IGU_REG_PCI_PF_MSIX_EN \
- 0x130144UL
-#define IGU_REG_PCI_PF_MSIX_FUNC_MASK \
- 0x130148UL
-#define IGU_REG_PCI_PF_MSI_EN \
- 0x130140UL
-#define IGU_REG_PENDING_BITS_STATUS \
- 0x130300UL
-#define IGU_REG_PF_CONFIGURATION \
- 0x130154UL
-#define IGU_REG_PROD_CONS_MEMORY \
- 0x132000UL
-#define IGU_REG_RESET_MEMORIES \
- 0x130158UL
-#define IGU_REG_SB_INT_BEFORE_MASK_LSB \
- 0x13015cUL
-#define IGU_REG_SB_INT_BEFORE_MASK_MSB \
- 0x130160UL
-#define IGU_REG_SB_MASK_LSB \
- 0x130164UL
-#define IGU_REG_SB_MASK_MSB \
- 0x130168UL
-#define IGU_REG_STATISTIC_NUM_MESSAGE_SENT \
- 0x130800UL
-#define IGU_REG_TRAILING_EDGE_LATCH \
- 0x130104UL
-#define IGU_REG_VF_CONFIGURATION \
- 0x130170UL
-#define MCP_REG_MCPR_ACCESS_LOCK \
- 0x8009c
-#define MCP_REG_MCPR_GP_INPUTS \
- 0x800c0
-#define MCP_REG_MCPR_GP_OENABLE \
- 0x800c8
-#define MCP_REG_MCPR_GP_OUTPUTS \
- 0x800c4
-#define MCP_REG_MCPR_IMC_COMMAND \
- 0x85900
-#define MCP_REG_MCPR_IMC_DATAREG0 \
- 0x85920
-#define MCP_REG_MCPR_IMC_SLAVE_CONTROL \
- 0x85904
-#define MCP_REG_MCPR_NVM_ACCESS_ENABLE \
- 0x86424
-#define MCP_REG_MCPR_NVM_ADDR \
- 0x8640c
-#define MCP_REG_MCPR_NVM_CFG4 \
- 0x8642c
-#define MCP_REG_MCPR_NVM_COMMAND \
- 0x86400
-#define MCP_REG_MCPR_NVM_READ \
- 0x86410
-#define MCP_REG_MCPR_NVM_SW_ARB \
- 0x86420
-#define MCP_REG_MCPR_NVM_WRITE \
- 0x86408
-#define MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK \
- (0x1<<1)
-#define MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK \
- (0x1<<0)
-#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 \
- 0xa42cUL
-#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 \
- 0xa438UL
-#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 \
- 0xa444UL
-#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 \
- 0xa450UL
-#define MISC_REG_AEU_AFTER_INVERT_4_MCP \
- 0xa458UL
-#define MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 \
- 0xa700UL
-#define MISC_REG_AEU_CLR_LATCH_SIGNAL \
- 0xa45cUL
-#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 \
- 0xa06cUL
-#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 \
- 0xa07cUL
-#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 \
- 0xa08cUL
-#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 \
- 0xa10cUL
-#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 \
- 0xa11cUL
-#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 \
- 0xa12cUL
-#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 \
- 0xa078UL
-#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 \
- 0xa118UL
-#define MISC_REG_AEU_ENABLE4_NIG_0 \
- 0xa0f8UL
-#define MISC_REG_AEU_ENABLE4_NIG_1 \
- 0xa198UL
-#define MISC_REG_AEU_ENABLE4_PXP_0 \
- 0xa108UL
-#define MISC_REG_AEU_ENABLE4_PXP_1 \
- 0xa1a8UL
-#define MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0 \
- 0xa688UL
-#define MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 \
- 0xa6b0UL
-#define MISC_REG_AEU_GENERAL_ATTN_0 \
- 0xa000UL
-#define MISC_REG_AEU_GENERAL_ATTN_1 \
- 0xa004UL
-#define MISC_REG_AEU_GENERAL_ATTN_10 \
- 0xa028UL
-#define MISC_REG_AEU_GENERAL_ATTN_11 \
- 0xa02cUL
-#define MISC_REG_AEU_GENERAL_ATTN_12 \
- 0xa030UL
-#define MISC_REG_AEU_GENERAL_ATTN_2 \
- 0xa008UL
-#define MISC_REG_AEU_GENERAL_ATTN_3 \
- 0xa00cUL
-#define MISC_REG_AEU_GENERAL_ATTN_4 \
- 0xa010UL
-#define MISC_REG_AEU_GENERAL_ATTN_5 \
- 0xa014UL
-#define MISC_REG_AEU_GENERAL_ATTN_6 \
- 0xa018UL
-#define MISC_REG_AEU_GENERAL_ATTN_7 \
- 0xa01cUL
-#define MISC_REG_AEU_GENERAL_ATTN_8 \
- 0xa020UL
-#define MISC_REG_AEU_GENERAL_ATTN_9 \
- 0xa024UL
-#define MISC_REG_AEU_GENERAL_MASK \
- 0xa61cUL
-#define MISC_REG_AEU_MASK_ATTN_FUNC_0 \
- 0xa060UL
-#define MISC_REG_AEU_MASK_ATTN_FUNC_1 \
- 0xa064UL
-#define MISC_REG_BOND_ID \
- 0xa400UL
-#define MISC_REG_CHIP_NUM \
- 0xa408UL
-#define MISC_REG_CHIP_REV \
- 0xa40cUL
-#define MISC_REG_CHIP_TYPE \
- 0xac60UL
-#define MISC_REG_CHIP_TYPE_57811_MASK \
- (1<<1)
-#define MISC_REG_CPMU_LP_DR_ENABLE \
- 0xa858UL
-#define MISC_REG_CPMU_LP_FW_ENABLE_P0 \
- 0xa84cUL
-#define MISC_REG_CPMU_LP_IDLE_THR_P0 \
- 0xa8a0UL
-#define MISC_REG_CPMU_LP_MASK_ENT_P0 \
- 0xa880UL
-#define MISC_REG_CPMU_LP_MASK_EXT_P0 \
- 0xa888UL
-#define MISC_REG_CPMU_LP_SM_ENT_CNT_P0 \
- 0xa8b8UL
-#define MISC_REG_CPMU_LP_SM_ENT_CNT_P1 \
- 0xa8bcUL
-#define MISC_REG_DRIVER_CONTROL_1 \
- 0xa510UL
-#define MISC_REG_DRIVER_CONTROL_7 \
- 0xa3c8UL
-#define MISC_REG_FOUR_PORT_PATH_SWAP \
- 0xa75cUL
-#define MISC_REG_FOUR_PORT_PATH_SWAP_OVWR \
- 0xa738UL
-#define MISC_REG_FOUR_PORT_PORT_SWAP \
- 0xa754UL
-#define MISC_REG_FOUR_PORT_PORT_SWAP_OVWR \
- 0xa734UL
-#define MISC_REG_GENERIC_CR_0 \
- 0xa460UL
-#define MISC_REG_GENERIC_CR_1 \
- 0xa464UL
-#define MISC_REG_GENERIC_POR_1 \
- 0xa474UL
-#define MISC_REG_GEN_PURP_HWG \
- 0xa9a0UL
-#define MISC_REG_GPIO \
- 0xa490UL
-#define MISC_REG_GPIO_EVENT_EN \
- 0xa2bcUL
-#define MISC_REG_GPIO_INT \
- 0xa494UL
-#define MISC_REG_GRC_RSV_ATTN \
- 0xa3c0UL
-#define MISC_REG_GRC_TIMEOUT_ATTN \
- 0xa3c4UL
-#define MISC_REG_LCPLL_E40_PWRDWN \
- 0xaa74UL
-#define MISC_REG_LCPLL_E40_RESETB_ANA \
- 0xaa78UL
-#define MISC_REG_LCPLL_E40_RESETB_DIG \
- 0xaa7cUL
-#define MISC_REG_MISC_INT_MASK \
- 0xa388UL
-#define MISC_REG_MISC_PRTY_MASK \
- 0xa398UL
-#define MISC_REG_MISC_PRTY_STS_CLR \
- 0xa390UL
-#define MISC_REG_PORT4MODE_EN \
- 0xa750UL
-#define MISC_REG_PORT4MODE_EN_OVWR \
- 0xa720UL
-#define MISC_REG_RESET_REG_1 \
- 0xa580UL
-#define MISC_REG_RESET_REG_2 \
- 0xa590UL
-#define MISC_REG_SHARED_MEM_ADDR \
- 0xa2b4UL
-#define MISC_REG_SPIO \
- 0xa4fcUL
-#define MISC_REG_SPIO_EVENT_EN \
- 0xa2b8UL
-#define MISC_REG_SPIO_INT \
- 0xa500UL
-#define MISC_REG_TWO_PORT_PATH_SWAP \
- 0xa758UL
-#define MISC_REG_TWO_PORT_PATH_SWAP_OVWR \
- 0xa72cUL
-#define MISC_REG_UNPREPARED \
- 0xa424UL
-#define MISC_REG_WC0_CTRL_PHY_ADDR \
- 0xa9ccUL
-#define MISC_REG_WC0_RESET \
- 0xac30UL
-#define MISC_REG_XMAC_CORE_PORT_MODE \
- 0xa964UL
-#define MISC_REG_XMAC_PHY_PORT_MODE \
- 0xa960UL
-#define MSTAT_REG_RX_STAT_GR64_LO \
- 0x200UL
-#define MSTAT_REG_TX_STAT_GTXPOK_LO \
- 0UL
-#define NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN \
- (0x1<<0)
-#define NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN \
- (0x1<<0)
-#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT \
- (0x1<<0)
-#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS \
- (0x1<<9)
-#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G \
- (0x1<<15)
-#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS \
- (0xf<<18)
-#define NIG_REG_BMAC0_IN_EN \
- 0x100acUL
-#define NIG_REG_BMAC0_OUT_EN \
- 0x100e0UL
-#define NIG_REG_BMAC0_PAUSE_OUT_EN \
- 0x10110UL
-#define NIG_REG_BMAC0_REGS_OUT_EN \
- 0x100e8UL
-#define NIG_REG_BRB0_PAUSE_IN_EN \
- 0x100c4UL
-#define NIG_REG_BRB1_PAUSE_IN_EN \
- 0x100c8UL
-#define NIG_REG_DEBUG_PACKET_LB \
- 0x10800UL
-#define NIG_REG_EGRESS_DRAIN0_MODE \
- 0x10060UL
-#define NIG_REG_EGRESS_EMAC0_OUT_EN \
- 0x10120UL
-#define NIG_REG_EGRESS_EMAC0_PORT \
- 0x10058UL
-#define NIG_REG_EMAC0_IN_EN \
- 0x100a4UL
-#define NIG_REG_EMAC0_PAUSE_OUT_EN \
- 0x10118UL
-#define NIG_REG_EMAC0_STATUS_MISC_MI_INT \
- 0x10494UL
-#define NIG_REG_INGRESS_BMAC0_MEM \
- 0x10c00UL
-#define NIG_REG_INGRESS_BMAC1_MEM \
- 0x11000UL
-#define NIG_REG_INGRESS_EOP_LB_EMPTY \
- 0x104e0UL
-#define NIG_REG_INGRESS_EOP_LB_FIFO \
- 0x104e4UL
-#define NIG_REG_LATCH_BC_0 \
- 0x16210UL
-#define NIG_REG_LATCH_STATUS_0 \
- 0x18000UL
-#define NIG_REG_LED_10G_P0 \
- 0x10320UL
-#define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 \
- 0x10318UL
-#define NIG_REG_LED_CONTROL_BLINK_RATE_P0 \
- 0x10310UL
-#define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 \
- 0x10308UL
-#define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 \
- 0x102f8UL
-#define NIG_REG_LED_CONTROL_TRAFFIC_P0 \
- 0x10300UL
-#define NIG_REG_LED_MODE_P0 \
- 0x102f0UL
-#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 \
- 0x16070UL
-#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 \
- 0x16074UL
-#define NIG_REG_LLFC_ENABLE_0 \
- 0x16208UL
-#define NIG_REG_LLFC_ENABLE_1 \
- 0x1620cUL
-#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 \
- 0x16058UL
-#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 \
- 0x1605cUL
-#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 \
- 0x16060UL
-#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 \
- 0x16064UL
-#define NIG_REG_LLFC_OUT_EN_0 \
- 0x160c8UL
-#define NIG_REG_LLFC_OUT_EN_1 \
- 0x160ccUL
-#define NIG_REG_LLH0_BRB1_DRV_MASK \
- 0x10244UL
-#define NIG_REG_LLH0_BRB1_DRV_MASK_MF \
- 0x16048UL
-#define NIG_REG_LLH0_BRB1_NOT_MCP \
- 0x1025cUL
-#define NIG_REG_LLH0_CLS_TYPE \
- 0x16080UL
-#define NIG_REG_LLH0_FUNC_EN \
- 0x160fcUL
-#define NIG_REG_LLH0_FUNC_MEM \
- 0x16180UL
-#define NIG_REG_LLH0_FUNC_MEM_ENABLE \
- 0x16140UL
-#define NIG_REG_LLH0_FUNC_VLAN_ID \
- 0x16100UL
-#define NIG_REG_LLH0_XCM_MASK \
- 0x10130UL
-#define NIG_REG_LLH1_BRB1_NOT_MCP \
- 0x102dcUL
-#define NIG_REG_LLH1_CLS_TYPE \
- 0x16084UL
-#define NIG_REG_LLH1_FUNC_MEM \
- 0x161c0UL
-#define NIG_REG_LLH1_FUNC_MEM_ENABLE \
- 0x16160UL
-#define NIG_REG_LLH1_FUNC_MEM_SIZE \
- 16
-#define NIG_REG_LLH1_MF_MODE \
- 0x18614UL
-#define NIG_REG_LLH1_XCM_MASK \
- 0x10134UL
-#define NIG_REG_LLH_E1HOV_MODE \
- 0x160d8UL
-#define NIG_REG_LLH_MF_MODE \
- 0x16024UL
-#define NIG_REG_MASK_INTERRUPT_PORT0 \
- 0x10330UL
-#define NIG_REG_MASK_INTERRUPT_PORT1 \
- 0x10334UL
-#define NIG_REG_NIG_EMAC0_EN \
- 0x1003cUL
-#define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC \
- 0x10044UL
-#define NIG_REG_NIG_INT_STS_CLR_0 \
- 0x103b4UL
-#define NIG_REG_NIG_PRTY_MASK \
- 0x103dcUL
-#define NIG_REG_NIG_PRTY_MASK_0 \
- 0x183c8UL
-#define NIG_REG_NIG_PRTY_MASK_1 \
- 0x183d8UL
-#define NIG_REG_NIG_PRTY_STS_CLR \
- 0x103d4UL
-#define NIG_REG_NIG_PRTY_STS_CLR_0 \
- 0x183c0UL
-#define NIG_REG_NIG_PRTY_STS_CLR_1 \
- 0x183d0UL
-#define NIG_REG_P0_HDRS_AFTER_BASIC \
- 0x18038UL
-#define NIG_REG_P0_HWPFC_ENABLE \
- 0x18078UL
-#define NIG_REG_P0_LLH_FUNC_MEM2 \
- 0x18480UL
-#define NIG_REG_P0_MAC_IN_EN \
- 0x185acUL
-#define NIG_REG_P0_MAC_OUT_EN \
- 0x185b0UL
-#define NIG_REG_P0_MAC_PAUSE_OUT_EN \
- 0x185b4UL
-#define NIG_REG_P0_PKT_PRIORITY_TO_COS \
- 0x18054UL
-#define NIG_REG_P0_RX_COS0_PRIORITY_MASK \
- 0x18058UL
-#define NIG_REG_P0_RX_COS1_PRIORITY_MASK \
- 0x1805cUL
-#define NIG_REG_P0_RX_COS2_PRIORITY_MASK \
- 0x186b0UL
-#define NIG_REG_P0_RX_COS3_PRIORITY_MASK \
- 0x186b4UL
-#define NIG_REG_P0_RX_COS4_PRIORITY_MASK \
- 0x186b8UL
-#define NIG_REG_P0_RX_COS5_PRIORITY_MASK \
- 0x186bcUL
-#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP \
- 0x180f0UL
-#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB \
- 0x18688UL
-#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB \
- 0x1868cUL
-#define NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT \
- 0x180e8UL
-#define NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ \
- 0x180ecUL
-#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0 \
- 0x1810cUL
-#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1 \
- 0x18110UL
-#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2 \
- 0x18114UL
-#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3 \
- 0x18118UL
-#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4 \
- 0x1811cUL
-#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5 \
- 0x186a0UL
-#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6 \
- 0x186a4UL
-#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7 \
- 0x186a8UL
-#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8 \
- 0x186acUL
-#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0 \
- 0x180f8UL
-#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1 \
- 0x180fcUL
-#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2 \
- 0x18100UL
-#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3 \
- 0x18104UL
-#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4 \
- 0x18108UL
-#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5 \
- 0x18690UL
-#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6 \
- 0x18694UL
-#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7 \
- 0x18698UL
-#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8 \
- 0x1869cUL
-#define NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS \
- 0x180f4UL
-#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT \
- 0x180e4UL
-#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB \
- 0x18680UL
-#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB \
- 0x18684UL
-#define NIG_REG_P1_HDRS_AFTER_BASIC \
- 0x1818cUL
-#define NIG_REG_P1_HWPFC_ENABLE \
- 0x181d0UL
-#define NIG_REG_P1_LLH_FUNC_MEM2 \
- 0x184c0UL
-#define NIG_REG_P1_MAC_IN_EN \
- 0x185c0UL
-#define NIG_REG_P1_MAC_OUT_EN \
- 0x185c4UL
-#define NIG_REG_P1_MAC_PAUSE_OUT_EN \
- 0x185c8UL
-#define NIG_REG_P1_PKT_PRIORITY_TO_COS \
- 0x181a8UL
-#define NIG_REG_P1_RX_COS0_PRIORITY_MASK \
- 0x181acUL
-#define NIG_REG_P1_RX_COS1_PRIORITY_MASK \
- 0x181b0UL
-#define NIG_REG_P1_RX_COS2_PRIORITY_MASK \
- 0x186f8UL
-#define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB \
- 0x186e8UL
-#define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_MSB \
- 0x186ecUL
-#define NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT \
- 0x18234UL
-#define NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ \
- 0x18238UL
-#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0 \
- 0x18258UL
-#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1 \
- 0x1825cUL
-#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2 \
- 0x18260UL
-#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3 \
- 0x18264UL
-#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4 \
- 0x18268UL
-#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5 \
- 0x186f4UL
-#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 \
- 0x18244UL
-#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 \
- 0x18248UL
-#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 \
- 0x1824cUL
-#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3 \
- 0x18250UL
-#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4 \
- 0x18254UL
-#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5 \
- 0x186f0UL
-#define NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS \
- 0x18240UL
-#define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB \
- 0x186e0UL
-#define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB \
- 0x186e4UL
-#define NIG_REG_PAUSE_ENABLE_0 \
- 0x160c0UL
-#define NIG_REG_PAUSE_ENABLE_1 \
- 0x160c4UL
-#define NIG_REG_PORT_SWAP \
- 0x10394UL
-#define NIG_REG_PPP_ENABLE_0 \
- 0x160b0UL
-#define NIG_REG_PPP_ENABLE_1 \
- 0x160b4UL
-#define NIG_REG_PRS_REQ_IN_EN \
- 0x100b8UL
-#define NIG_REG_SERDES0_CTRL_MD_DEVAD \
- 0x10370UL
-#define NIG_REG_SERDES0_CTRL_MD_ST \
- 0x1036cUL
-#define NIG_REG_SERDES0_CTRL_PHY_ADDR \
- 0x10374UL
-#define NIG_REG_SERDES0_STATUS_LINK_STATUS \
- 0x10578UL
-#define NIG_REG_STAT0_BRB_DISCARD \
- 0x105f0UL
-#define NIG_REG_STAT0_BRB_TRUNCATE \
- 0x105f8UL
-#define NIG_REG_STAT0_EGRESS_MAC_PKT0 \
- 0x10750UL
-#define NIG_REG_STAT0_EGRESS_MAC_PKT1 \
- 0x10760UL
-#define NIG_REG_STAT1_BRB_DISCARD \
- 0x10628UL
-#define NIG_REG_STAT1_EGRESS_MAC_PKT0 \
- 0x107a0UL
-#define NIG_REG_STAT1_EGRESS_MAC_PKT1 \
- 0x107b0UL
-#define NIG_REG_STAT2_BRB_OCTET \
- 0x107e0UL
-#define NIG_REG_STATUS_INTERRUPT_PORT0 \
- 0x10328UL
-#define NIG_REG_STRAP_OVERRIDE \
- 0x10398UL
-#define NIG_REG_XCM0_OUT_EN \
- 0x100f0UL
-#define NIG_REG_XCM1_OUT_EN \
- 0x100f4UL
-#define NIG_REG_XGXS0_CTRL_MD_DEVAD \
- 0x1033cUL
-#define NIG_REG_XGXS0_CTRL_MD_ST \
- 0x10338UL
-#define NIG_REG_XGXS0_CTRL_PHY_ADDR \
- 0x10340UL
-#define NIG_REG_XGXS0_STATUS_LINK10G \
- 0x10680UL
-#define NIG_REG_XGXS0_STATUS_LINK_STATUS \
- 0x10684UL
-#define NIG_REG_XGXS_LANE_SEL_P0 \
- 0x102e8UL
-#define NIG_REG_XGXS_SERDES0_MODE_SEL \
- 0x102e0UL
-#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT \
- (0x1<<0)
-#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS \
- (0x1<<9)
-#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G \
- (0x1<<15)
-#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS \
- (0xf<<18)
-#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE \
- 18
-#define PBF_REG_COS0_UPPER_BOUND \
- 0x15c05cUL
-#define PBF_REG_COS0_UPPER_BOUND_P0 \
- 0x15c2ccUL
-#define PBF_REG_COS0_UPPER_BOUND_P1 \
- 0x15c2e4UL
-#define PBF_REG_COS0_WEIGHT \
- 0x15c054UL
-#define PBF_REG_COS0_WEIGHT_P0 \
- 0x15c2a8UL
-#define PBF_REG_COS0_WEIGHT_P1 \
- 0x15c2c0UL
-#define PBF_REG_COS1_UPPER_BOUND \
- 0x15c060UL
-#define PBF_REG_COS1_WEIGHT \
- 0x15c058UL
-#define PBF_REG_COS1_WEIGHT_P0 \
- 0x15c2acUL
-#define PBF_REG_COS1_WEIGHT_P1 \
- 0x15c2c4UL
-#define PBF_REG_COS2_WEIGHT_P0 \
- 0x15c2b0UL
-#define PBF_REG_COS2_WEIGHT_P1 \
- 0x15c2c8UL
-#define PBF_REG_COS3_WEIGHT_P0 \
- 0x15c2b4UL
-#define PBF_REG_COS4_WEIGHT_P0 \
- 0x15c2b8UL
-#define PBF_REG_COS5_WEIGHT_P0 \
- 0x15c2bcUL
-#define PBF_REG_CREDIT_LB_Q \
- 0x140338UL
-#define PBF_REG_CREDIT_Q0 \
- 0x14033cUL
-#define PBF_REG_CREDIT_Q1 \
- 0x140340UL
-#define PBF_REG_DISABLE_NEW_TASK_PROC_P0 \
- 0x14005cUL
-#define PBF_REG_DISABLE_PF \
- 0x1402e8UL
-#define PBF_REG_DISABLE_VF \
- 0x1402ecUL
-#define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0 \
- 0x15c288UL
-#define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1 \
- 0x15c28cUL
-#define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 \
- 0x15c278UL
-#define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 \
- 0x15c27cUL
-#define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0 \
- 0x15c280UL
-#define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 \
- 0x15c284UL
-#define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0 \
- 0x15c2a0UL
-#define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1 \
- 0x15c2a4UL
-#define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 \
- 0x15c270UL
-#define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 \
- 0x15c274UL
-#define PBF_REG_ETS_ENABLED \
- 0x15c050UL
-#define PBF_REG_HDRS_AFTER_BASIC \
- 0x15c0a8UL
-#define PBF_REG_HDRS_AFTER_TAG_0 \
- 0x15c0b8UL
-#define PBF_REG_HIGH_PRIORITY_COS_NUM \
- 0x15c04cUL
-#define PBF_REG_INIT_CRD_LB_Q \
- 0x15c248UL
-#define PBF_REG_INIT_CRD_Q0 \
- 0x15c230UL
-#define PBF_REG_INIT_CRD_Q1 \
- 0x15c234UL
-#define PBF_REG_INIT_P0 \
- 0x140004UL
-#define PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q \
- 0x140354UL
-#define PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 \
- 0x140358UL
-#define PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 \
- 0x14035cUL
-#define PBF_REG_MUST_HAVE_HDRS \
- 0x15c0c4UL
-#define PBF_REG_NUM_STRICT_ARB_SLOTS \
- 0x15c064UL
-#define PBF_REG_P0_ARB_THRSH \
- 0x1400e4UL
-#define PBF_REG_P0_CREDIT \
- 0x140200UL
-#define PBF_REG_P0_INIT_CRD \
- 0x1400d0UL
-#define PBF_REG_P0_INTERNAL_CRD_FREED_CNT \
- 0x140308UL
-#define PBF_REG_P0_PAUSE_ENABLE \
- 0x140014UL
-#define PBF_REG_P0_TQ_LINES_FREED_CNT \
- 0x1402f0UL
-#define PBF_REG_P0_TQ_OCCUPANCY \
- 0x1402fcUL
-#define PBF_REG_P1_CREDIT \
- 0x140208UL
-#define PBF_REG_P1_INIT_CRD \
- 0x1400d4UL
-#define PBF_REG_P1_INTERNAL_CRD_FREED_CNT \
- 0x14030cUL
-#define PBF_REG_P1_TQ_LINES_FREED_CNT \
- 0x1402f4UL
-#define PBF_REG_P1_TQ_OCCUPANCY \
- 0x140300UL
-#define PBF_REG_P4_CREDIT \
- 0x140210UL
-#define PBF_REG_P4_INIT_CRD \
- 0x1400e0UL
-#define PBF_REG_P4_INTERNAL_CRD_FREED_CNT \
- 0x140310UL
-#define PBF_REG_P4_TQ_LINES_FREED_CNT \
- 0x1402f8UL
-#define PBF_REG_P4_TQ_OCCUPANCY \
- 0x140304UL
-#define PBF_REG_PBF_INT_MASK \
- 0x1401d4UL
-#define PBF_REG_PBF_PRTY_MASK \
- 0x1401e4UL
-#define PBF_REG_PBF_PRTY_STS_CLR \
- 0x1401dcUL
-#define PBF_REG_TAG_ETHERTYPE_0 \
- 0x15c090UL
-#define PBF_REG_TAG_LEN_0 \
- 0x15c09cUL
-#define PBF_REG_TQ_LINES_FREED_CNT_LB_Q \
- 0x14038cUL
-#define PBF_REG_TQ_LINES_FREED_CNT_Q0 \
- 0x140390UL
-#define PBF_REG_TQ_LINES_FREED_CNT_Q1 \
- 0x140394UL
-#define PBF_REG_TQ_OCCUPANCY_LB_Q \
- 0x1403a8UL
-#define PBF_REG_TQ_OCCUPANCY_Q0 \
- 0x1403acUL
-#define PBF_REG_TQ_OCCUPANCY_Q1 \
- 0x1403b0UL
-#define PB_REG_PB_INT_MASK \
- 0x28UL
-#define PB_REG_PB_PRTY_MASK \
- 0x38UL
-#define PB_REG_PB_PRTY_STS_CLR \
- 0x30UL
-#define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR \
- (0x1<<0)
-#define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW \
- (0x1<<8)
-#define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR \
- (0x1<<1)
-#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN \
- (0x1<<6)
-#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN \
- (0x1<<7)
-#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN \
- (0x1<<4)
-#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN \
- (0x1<<3)
-#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN \
- (0x1<<5)
-#define PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN \
- (0x1<<2)
-#define PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR \
- 0x9418UL
-#define PGLUE_B_REG_WAS_ERROR_VF_31_0_CLR \
- 0x9478UL
-#define PGLUE_B_REG_WAS_ERROR_VF_63_32_CLR \
- 0x947cUL
-#define PGLUE_B_REG_WAS_ERROR_VF_95_64_CLR \
- 0x9480UL
-#define PGLUE_B_REG_WAS_ERROR_VF_127_96_CLR \
- 0x9474UL
-#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER \
- 0x942cUL
-#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ \
- 0x9430UL
-#define PGLUE_B_REG_INTERNAL_VFID_ENABLE \
- 0x9438UL
-#define PGLUE_B_REG_PGLUE_B_INT_STS \
- 0x9298UL
-#define PGLUE_B_REG_PGLUE_B_INT_STS_CLR \
- 0x929cUL
-#define PGLUE_B_REG_PGLUE_B_PRTY_MASK \
- 0x92b4UL
-#define PGLUE_B_REG_PGLUE_B_PRTY_STS_CLR \
- 0x92acUL
-#define PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR \
- 0x9458UL
-#define PGLUE_B_REG_TAGS_63_32 \
- 0x9244UL
-#define PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR \
- 0x9470UL
-#define PRS_REG_A_PRSU_20 \
- 0x40134UL
-#define PRS_REG_CFC_SEARCH_INITIAL_CREDIT \
- 0x4011cUL
-#define PRS_REG_E1HOV_MODE \
- 0x401c8UL
-#define PRS_REG_HDRS_AFTER_BASIC \
- 0x40238UL
-#define PRS_REG_HDRS_AFTER_BASIC_PORT_0 \
- 0x40270UL
-#define PRS_REG_HDRS_AFTER_BASIC_PORT_1 \
- 0x40290UL
-#define PRS_REG_HDRS_AFTER_TAG_0 \
- 0x40248UL
-#define PRS_REG_HDRS_AFTER_TAG_0_PORT_0 \
- 0x40280UL
-#define PRS_REG_HDRS_AFTER_TAG_0_PORT_1 \
- 0x402a0UL
-#define PRS_REG_MUST_HAVE_HDRS \
- 0x40254UL
-#define PRS_REG_MUST_HAVE_HDRS_PORT_0 \
- 0x4028cUL
-#define PRS_REG_MUST_HAVE_HDRS_PORT_1 \
- 0x402acUL
-#define PRS_REG_NIC_MODE \
- 0x40138UL
-#define PRS_REG_NUM_OF_PACKETS \
- 0x40124UL
-#define PRS_REG_PRS_PRTY_MASK \
- 0x401a4UL
-#define PRS_REG_PRS_PRTY_STS_CLR \
- 0x4019cUL
-#define PRS_REG_TAG_ETHERTYPE_0 \
- 0x401d4UL
-#define PRS_REG_TAG_LEN_0 \
- 0x4022cUL
-#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT \
- (0x1<<19)
-#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF \
- (0x1<<20)
-#define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN \
- (0x1<<22)
-#define PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED \
- (0x1<<23)
-#define PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED \
- (0x1<<24)
-#define PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR \
- (0x1<<7)
-#define PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR \
- (0x1<<7)
-#define PXP2_REG_PGL_ADDR_88_F0 \
- 0x120534UL
-#define PXP2_REG_PGL_ADDR_88_F1 \
- 0x120544UL
-#define PXP2_REG_PGL_ADDR_8C_F0 \
- 0x120538UL
-#define PXP2_REG_PGL_ADDR_8C_F1 \
- 0x120548UL
-#define PXP2_REG_PGL_ADDR_90_F0 \
- 0x12053cUL
-#define PXP2_REG_PGL_ADDR_90_F1 \
- 0x12054cUL
-#define PXP2_REG_PGL_ADDR_94_F0 \
- 0x120540UL
-#define PXP2_REG_PGL_ADDR_94_F1 \
- 0x120550UL
-#define PXP2_REG_PGL_EXP_ROM2 \
- 0x120808UL
-#define PXP2_REG_PGL_PRETEND_FUNC_F0 \
- 0x120674UL
-#define PXP2_REG_PGL_PRETEND_FUNC_F1 \
- 0x120678UL
-#define PXP2_REG_PGL_TAGS_LIMIT \
- 0x1205a8UL
-#define PXP2_REG_PSWRQ_BW_ADD1 \
- 0x1201c0UL
-#define PXP2_REG_PSWRQ_BW_ADD10 \
- 0x1201e4UL
-#define PXP2_REG_PSWRQ_BW_ADD11 \
- 0x1201e8UL
-#define PXP2_REG_PSWRQ_BW_ADD2 \
- 0x1201c4UL
-#define PXP2_REG_PSWRQ_BW_ADD28 \
- 0x120228UL
-#define PXP2_REG_PSWRQ_BW_ADD3 \
- 0x1201c8UL
-#define PXP2_REG_PSWRQ_BW_ADD6 \
- 0x1201d4UL
-#define PXP2_REG_PSWRQ_BW_ADD7 \
- 0x1201d8UL
-#define PXP2_REG_PSWRQ_BW_ADD8 \
- 0x1201dcUL
-#define PXP2_REG_PSWRQ_BW_ADD9 \
- 0x1201e0UL
-#define PXP2_REG_PSWRQ_BW_L1 \
- 0x1202b0UL
-#define PXP2_REG_PSWRQ_BW_L10 \
- 0x1202d4UL
-#define PXP2_REG_PSWRQ_BW_L11 \
- 0x1202d8UL
-#define PXP2_REG_PSWRQ_BW_L2 \
- 0x1202b4UL
-#define PXP2_REG_PSWRQ_BW_L28 \
- 0x120318UL
-#define PXP2_REG_PSWRQ_BW_L3 \
- 0x1202b8UL
-#define PXP2_REG_PSWRQ_BW_L6 \
- 0x1202c4UL
-#define PXP2_REG_PSWRQ_BW_L7 \
- 0x1202c8UL
-#define PXP2_REG_PSWRQ_BW_L8 \
- 0x1202ccUL
-#define PXP2_REG_PSWRQ_BW_L9 \
- 0x1202d0UL
-#define PXP2_REG_PSWRQ_BW_RD \
- 0x120324UL
-#define PXP2_REG_PSWRQ_BW_UB1 \
- 0x120238UL
-#define PXP2_REG_PSWRQ_BW_UB10 \
- 0x12025cUL
-#define PXP2_REG_PSWRQ_BW_UB11 \
- 0x120260UL
-#define PXP2_REG_PSWRQ_BW_UB2 \
- 0x12023cUL
-#define PXP2_REG_PSWRQ_BW_UB28 \
- 0x1202a0UL
-#define PXP2_REG_PSWRQ_BW_UB3 \
- 0x120240UL
-#define PXP2_REG_PSWRQ_BW_UB6 \
- 0x12024cUL
-#define PXP2_REG_PSWRQ_BW_UB7 \
- 0x120250UL
-#define PXP2_REG_PSWRQ_BW_UB8 \
- 0x120254UL
-#define PXP2_REG_PSWRQ_BW_UB9 \
- 0x120258UL
-#define PXP2_REG_PSWRQ_BW_WR \
- 0x120328UL
-#define PXP2_REG_PSWRQ_CDU0_L2P \
- 0x120000UL
-#define PXP2_REG_PSWRQ_QM0_L2P \
- 0x120038UL
-#define PXP2_REG_PSWRQ_SRC0_L2P \
- 0x120054UL
-#define PXP2_REG_PSWRQ_TM0_L2P \
- 0x12001cUL
-#define PXP2_REG_PXP2_INT_MASK_0 \
- 0x120578UL
-#define PXP2_REG_PXP2_INT_MASK_1 \
- 0x120614UL
-#define PXP2_REG_PXP2_INT_STS_0 \
- 0x12056cUL
-#define PXP2_REG_PXP2_INT_STS_1 \
- 0x120608UL
-#define PXP2_REG_PXP2_INT_STS_CLR_0 \
- 0x120570UL
-#define PXP2_REG_PXP2_PRTY_MASK_0 \
- 0x120588UL
-#define PXP2_REG_PXP2_PRTY_MASK_1 \
- 0x120598UL
-#define PXP2_REG_PXP2_PRTY_STS_CLR_0 \
- 0x120580UL
-#define PXP2_REG_PXP2_PRTY_STS_CLR_1 \
- 0x120590UL
-#define PXP2_REG_RD_BLK_CNT \
- 0x120418UL
-#define PXP2_REG_RD_CDURD_SWAP_MODE \
- 0x120404UL
-#define PXP2_REG_RD_DISABLE_INPUTS \
- 0x120374UL
-#define PXP2_REG_RD_INIT_DONE \
- 0x120370UL
-#define PXP2_REG_RD_PBF_SWAP_MODE \
- 0x1203f4UL
-#define PXP2_REG_RD_PORT_IS_IDLE_0 \
- 0x12041cUL
-#define PXP2_REG_RD_PORT_IS_IDLE_1 \
- 0x120420UL
-#define PXP2_REG_RD_QM_SWAP_MODE \
- 0x1203f8UL
-#define PXP2_REG_RD_SRC_SWAP_MODE \
- 0x120400UL
-#define PXP2_REG_RD_SR_CNT \
- 0x120414UL
-#define PXP2_REG_RD_START_INIT \
- 0x12036cUL
-#define PXP2_REG_RD_TM_SWAP_MODE \
- 0x1203fcUL
-#define PXP2_REG_RQ_BW_RD_ADD0 \
- 0x1201bcUL
-#define PXP2_REG_RQ_BW_RD_ADD12 \
- 0x1201ecUL
-#define PXP2_REG_RQ_BW_RD_ADD13 \
- 0x1201f0UL
-#define PXP2_REG_RQ_BW_RD_ADD14 \
- 0x1201f4UL
-#define PXP2_REG_RQ_BW_RD_ADD15 \
- 0x1201f8UL
-#define PXP2_REG_RQ_BW_RD_ADD16 \
- 0x1201fcUL
-#define PXP2_REG_RQ_BW_RD_ADD17 \
- 0x120200UL
-#define PXP2_REG_RQ_BW_RD_ADD18 \
- 0x120204UL
-#define PXP2_REG_RQ_BW_RD_ADD19 \
- 0x120208UL
-#define PXP2_REG_RQ_BW_RD_ADD20 \
- 0x12020cUL
-#define PXP2_REG_RQ_BW_RD_ADD22 \
- 0x120210UL
-#define PXP2_REG_RQ_BW_RD_ADD23 \
- 0x120214UL
-#define PXP2_REG_RQ_BW_RD_ADD24 \
- 0x120218UL
-#define PXP2_REG_RQ_BW_RD_ADD25 \
- 0x12021cUL
-#define PXP2_REG_RQ_BW_RD_ADD26 \
- 0x120220UL
-#define PXP2_REG_RQ_BW_RD_ADD27 \
- 0x120224UL
-#define PXP2_REG_RQ_BW_RD_ADD4 \
- 0x1201ccUL
-#define PXP2_REG_RQ_BW_RD_ADD5 \
- 0x1201d0UL
-#define PXP2_REG_RQ_BW_RD_L0 \
- 0x1202acUL
-#define PXP2_REG_RQ_BW_RD_L12 \
- 0x1202dcUL
-#define PXP2_REG_RQ_BW_RD_L13 \
- 0x1202e0UL
-#define PXP2_REG_RQ_BW_RD_L14 \
- 0x1202e4UL
-#define PXP2_REG_RQ_BW_RD_L15 \
- 0x1202e8UL
-#define PXP2_REG_RQ_BW_RD_L16 \
- 0x1202ecUL
-#define PXP2_REG_RQ_BW_RD_L17 \
- 0x1202f0UL
-#define PXP2_REG_RQ_BW_RD_L18 \
- 0x1202f4UL
-#define PXP2_REG_RQ_BW_RD_L19 \
- 0x1202f8UL
-#define PXP2_REG_RQ_BW_RD_L20 \
- 0x1202fcUL
-#define PXP2_REG_RQ_BW_RD_L22 \
- 0x120300UL
-#define PXP2_REG_RQ_BW_RD_L23 \
- 0x120304UL
-#define PXP2_REG_RQ_BW_RD_L24 \
- 0x120308UL
-#define PXP2_REG_RQ_BW_RD_L25 \
- 0x12030cUL
-#define PXP2_REG_RQ_BW_RD_L26 \
- 0x120310UL
-#define PXP2_REG_RQ_BW_RD_L27 \
- 0x120314UL
-#define PXP2_REG_RQ_BW_RD_L4 \
- 0x1202bcUL
-#define PXP2_REG_RQ_BW_RD_L5 \
- 0x1202c0UL
-#define PXP2_REG_RQ_BW_RD_UBOUND0 \
- 0x120234UL
-#define PXP2_REG_RQ_BW_RD_UBOUND12 \
- 0x120264UL
-#define PXP2_REG_RQ_BW_RD_UBOUND13 \
- 0x120268UL
-#define PXP2_REG_RQ_BW_RD_UBOUND14 \
- 0x12026cUL
-#define PXP2_REG_RQ_BW_RD_UBOUND15 \
- 0x120270UL
-#define PXP2_REG_RQ_BW_RD_UBOUND16 \
- 0x120274UL
-#define PXP2_REG_RQ_BW_RD_UBOUND17 \
- 0x120278UL
-#define PXP2_REG_RQ_BW_RD_UBOUND18 \
- 0x12027cUL
-#define PXP2_REG_RQ_BW_RD_UBOUND19 \
- 0x120280UL
-#define PXP2_REG_RQ_BW_RD_UBOUND20 \
- 0x120284UL
-#define PXP2_REG_RQ_BW_RD_UBOUND22 \
- 0x120288UL
-#define PXP2_REG_RQ_BW_RD_UBOUND23 \
- 0x12028cUL
-#define PXP2_REG_RQ_BW_RD_UBOUND24 \
- 0x120290UL
-#define PXP2_REG_RQ_BW_RD_UBOUND25 \
- 0x120294UL
-#define PXP2_REG_RQ_BW_RD_UBOUND26 \
- 0x120298UL
-#define PXP2_REG_RQ_BW_RD_UBOUND27 \
- 0x12029cUL
-#define PXP2_REG_RQ_BW_RD_UBOUND4 \
- 0x120244UL
-#define PXP2_REG_RQ_BW_RD_UBOUND5 \
- 0x120248UL
-#define PXP2_REG_RQ_BW_WR_ADD29 \
- 0x12022cUL
-#define PXP2_REG_RQ_BW_WR_ADD30 \
- 0x120230UL
-#define PXP2_REG_RQ_BW_WR_L29 \
- 0x12031cUL
-#define PXP2_REG_RQ_BW_WR_L30 \
- 0x120320UL
-#define PXP2_REG_RQ_BW_WR_UBOUND29 \
- 0x1202a4UL
-#define PXP2_REG_RQ_BW_WR_UBOUND30 \
- 0x1202a8UL
-#define PXP2_REG_RQ_CDU_ENDIAN_M \
- 0x1201a0UL
-#define PXP2_REG_RQ_CDU_FIRST_ILT \
- 0x12061cUL
-#define PXP2_REG_RQ_CDU_LAST_ILT \
- 0x120620UL
-#define PXP2_REG_RQ_CDU_P_SIZE \
- 0x120018UL
-#define PXP2_REG_RQ_CFG_DONE \
- 0x1201b4UL
-#define PXP2_REG_RQ_DBG_ENDIAN_M \
- 0x1201a4UL
-#define PXP2_REG_RQ_DISABLE_INPUTS \
- 0x120330UL
-#define PXP2_REG_RQ_DRAM_ALIGN \
- 0x1205b0UL
-#define PXP2_REG_RQ_DRAM_ALIGN_RD \
- 0x12092cUL
-#define PXP2_REG_RQ_DRAM_ALIGN_SEL \
- 0x120930UL
-#define PXP2_REG_RQ_HC_ENDIAN_M \
- 0x1201a8UL
-#define PXP2_REG_RQ_ONCHIP_AT \
- 0x122000UL
-#define PXP2_REG_RQ_ONCHIP_AT_B0 \
- 0x128000UL
-#define PXP2_REG_RQ_PDR_LIMIT \
- 0x12033cUL
-#define PXP2_REG_RQ_QM_ENDIAN_M \
- 0x120194UL
-#define PXP2_REG_RQ_QM_FIRST_ILT \
- 0x120634UL
-#define PXP2_REG_RQ_QM_LAST_ILT \
- 0x120638UL
-#define PXP2_REG_RQ_QM_P_SIZE \
- 0x120050UL
-#define PXP2_REG_RQ_RBC_DONE \
- 0x1201b0UL
-#define PXP2_REG_RQ_RD_MBS0 \
- 0x120160UL
-#define PXP2_REG_RQ_RD_MBS1 \
- 0x120168UL
-#define PXP2_REG_RQ_SRC_ENDIAN_M \
- 0x12019cUL
-#define PXP2_REG_RQ_SRC_FIRST_ILT \
- 0x12063cUL
-#define PXP2_REG_RQ_SRC_LAST_ILT \
- 0x120640UL
-#define PXP2_REG_RQ_SRC_P_SIZE \
- 0x12006cUL
-#define PXP2_REG_RQ_TM_ENDIAN_M \
- 0x120198UL
-#define PXP2_REG_RQ_TM_FIRST_ILT \
- 0x120644UL
-#define PXP2_REG_RQ_TM_LAST_ILT \
- 0x120648UL
-#define PXP2_REG_RQ_TM_P_SIZE \
- 0x120034UL
-#define PXP2_REG_RQ_WR_MBS0 \
- 0x12015cUL
-#define PXP2_REG_RQ_WR_MBS1 \
- 0x120164UL
-#define PXP2_REG_WR_CDU_MPS \
- 0x1205f0UL
-#define PXP2_REG_WR_CSDM_MPS \
- 0x1205d0UL
-#define PXP2_REG_WR_DBG_MPS \
- 0x1205e8UL
-#define PXP2_REG_WR_DMAE_MPS \
- 0x1205ecUL
-#define PXP2_REG_WR_HC_MPS \
- 0x1205c8UL
-#define PXP2_REG_WR_QM_MPS \
- 0x1205dcUL
-#define PXP2_REG_WR_SRC_MPS \
- 0x1205e4UL
-#define PXP2_REG_WR_TM_MPS \
- 0x1205e0UL
-#define PXP2_REG_WR_TSDM_MPS \
- 0x1205d4UL
-#define PXP2_REG_WR_USDMDP_TH \
- 0x120348UL
-#define PXP2_REG_WR_USDM_MPS \
- 0x1205ccUL
-#define PXP2_REG_WR_XSDM_MPS \
- 0x1205d8UL
-#define PXP_REG_HST_DISCARD_DOORBELLS \
- 0x1030a4UL
-#define PXP_REG_HST_DISCARD_INTERNAL_WRITES \
- 0x1030a8UL
-#define PXP_REG_HST_ZONE_PERMISSION_TABLE \
- 0x103400UL
-#define PXP_REG_PXP_INT_MASK_0 \
- 0x103074UL
-#define PXP_REG_PXP_INT_MASK_1 \
- 0x103084UL
-#define PXP_REG_PXP_INT_STS_CLR_0 \
- 0x10306cUL
-#define PXP_REG_PXP_INT_STS_CLR_1 \
- 0x10307cUL
-#define PXP_REG_PXP_PRTY_MASK \
- 0x103094UL
-#define PXP_REG_PXP_PRTY_STS_CLR \
- 0x10308cUL
-#define QM_REG_BASEADDR \
- 0x168900UL
-#define QM_REG_BASEADDR_EXT_A \
- 0x16e100UL
-#define QM_REG_BYTECRDCMDQ_0 \
- 0x16e6e8UL
-#define QM_REG_CONNNUM_0 \
- 0x168020UL
-#define QM_REG_PF_EN \
- 0x16e70cUL
-#define QM_REG_PF_USG_CNT_0 \
- 0x16e040UL
-#define QM_REG_PTRTBL \
- 0x168a00UL
-#define QM_REG_PTRTBL_EXT_A \
- 0x16e200UL
-#define QM_REG_QM_INT_MASK \
- 0x168444UL
-#define QM_REG_QM_PRTY_MASK \
- 0x168454UL
-#define QM_REG_QM_PRTY_STS_CLR \
- 0x16844cUL
-#define QM_REG_QVOQIDX_0 \
- 0x1680f4UL
-#define QM_REG_SOFT_RESET \
- 0x168428UL
-#define QM_REG_VOQQMASK_0_LSB \
- 0x168240UL
-#define SEM_FAST_REG_PARITY_RST \
- 0x18840UL
-#define SRC_REG_COUNTFREE0 \
- 0x40500UL
-#define SRC_REG_FIRSTFREE0 \
- 0x40510UL
-#define SRC_REG_KEYSEARCH_0 \
- 0x40458UL
-#define SRC_REG_KEYSEARCH_1 \
- 0x4045cUL
-#define SRC_REG_KEYSEARCH_2 \
- 0x40460UL
-#define SRC_REG_KEYSEARCH_3 \
- 0x40464UL
-#define SRC_REG_KEYSEARCH_4 \
- 0x40468UL
-#define SRC_REG_KEYSEARCH_5 \
- 0x4046cUL
-#define SRC_REG_KEYSEARCH_6 \
- 0x40470UL
-#define SRC_REG_KEYSEARCH_7 \
- 0x40474UL
-#define SRC_REG_KEYSEARCH_8 \
- 0x40478UL
-#define SRC_REG_KEYSEARCH_9 \
- 0x4047cUL
-#define SRC_REG_LASTFREE0 \
- 0x40530UL
-#define SRC_REG_NUMBER_HASH_BITS0 \
- 0x40400UL
-#define SRC_REG_SOFT_RST \
- 0x4049cUL
-#define SRC_REG_SRC_PRTY_MASK \
- 0x404c8UL
-#define SRC_REG_SRC_PRTY_STS_CLR \
- 0x404c0UL
-#define TCM_REG_PRS_IFEN \
- 0x50020UL
-#define TCM_REG_TCM_INT_MASK \
- 0x501dcUL
-#define TCM_REG_TCM_PRTY_MASK \
- 0x501ecUL
-#define TCM_REG_TCM_PRTY_STS_CLR \
- 0x501e4UL
-#define TM_REG_EN_LINEAR0_TIMER \
- 0x164014UL
-#define TM_REG_LIN0_MAX_ACTIVE_CID \
- 0x164048UL
-#define TM_REG_LIN0_NUM_SCANS \
- 0x1640a0UL
-#define TM_REG_LIN0_SCAN_ON \
- 0x1640d0UL
-#define TM_REG_LIN0_SCAN_TIME \
- 0x16403cUL
-#define TM_REG_LIN0_VNIC_UC \
- 0x164128UL
-#define TM_REG_TM_INT_MASK \
- 0x1640fcUL
-#define TM_REG_TM_PRTY_MASK \
- 0x16410cUL
-#define TM_REG_TM_PRTY_STS_CLR \
- 0x164104UL
-#define TSDM_REG_ENABLE_IN1 \
- 0x42238UL
-#define TSDM_REG_TSDM_INT_MASK_0 \
- 0x4229cUL
-#define TSDM_REG_TSDM_INT_MASK_1 \
- 0x422acUL
-#define TSDM_REG_TSDM_PRTY_MASK \
- 0x422bcUL
-#define TSDM_REG_TSDM_PRTY_STS_CLR \
- 0x422b4UL
-#define TSEM_REG_FAST_MEMORY \
- 0x1a0000UL
-#define TSEM_REG_INT_TABLE \
- 0x180400UL
-#define TSEM_REG_PASSIVE_BUFFER \
- 0x181000UL
-#define TSEM_REG_PRAM \
- 0x1c0000UL
-#define TSEM_REG_TSEM_INT_MASK_0 \
- 0x180100UL
-#define TSEM_REG_TSEM_INT_MASK_1 \
- 0x180110UL
-#define TSEM_REG_TSEM_PRTY_MASK_0 \
- 0x180120UL
-#define TSEM_REG_TSEM_PRTY_MASK_1 \
- 0x180130UL
-#define TSEM_REG_TSEM_PRTY_STS_CLR_0 \
- 0x180118UL
-#define TSEM_REG_TSEM_PRTY_STS_CLR_1 \
- 0x180128UL
-#define TSEM_REG_VFPF_ERR_NUM \
- 0x180380UL
-#define UCM_REG_UCM_INT_MASK \
- 0xe01d4UL
-#define UCM_REG_UCM_PRTY_MASK \
- 0xe01e4UL
-#define UCM_REG_UCM_PRTY_STS_CLR \
- 0xe01dcUL
-#define UMAC_COMMAND_CONFIG_REG_HD_ENA \
- (0x1<<10)
-#define UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE \
- (0x1<<28)
-#define UMAC_COMMAND_CONFIG_REG_LOOP_ENA \
- (0x1<<15)
-#define UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK \
- (0x1<<24)
-#define UMAC_COMMAND_CONFIG_REG_PAD_EN \
- (0x1<<5)
-#define UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE \
- (0x1<<8)
-#define UMAC_COMMAND_CONFIG_REG_PROMIS_EN \
- (0x1<<4)
-#define UMAC_COMMAND_CONFIG_REG_RX_ENA \
- (0x1<<1)
-#define UMAC_COMMAND_CONFIG_REG_SW_RESET \
- (0x1<<13)
-#define UMAC_COMMAND_CONFIG_REG_TX_ENA \
- (0x1<<0)
-#define UMAC_REG_COMMAND_CONFIG \
- 0x8UL
-#define UMAC_REG_EEE_WAKE_TIMER \
- 0x6cUL
-#define UMAC_REG_MAC_ADDR0 \
- 0xcUL
-#define UMAC_REG_MAC_ADDR1 \
- 0x10UL
-#define UMAC_REG_MAXFR \
- 0x14UL
-#define UMAC_REG_UMAC_EEE_CTRL \
- 0x64UL
-#define UMAC_UMAC_EEE_CTRL_REG_EEE_EN \
- (0x1<<3)
-#define USDM_REG_USDM_INT_MASK_0 \
- 0xc42a0UL
-#define USDM_REG_USDM_INT_MASK_1 \
- 0xc42b0UL
-#define USDM_REG_USDM_PRTY_MASK \
- 0xc42c0UL
-#define USDM_REG_USDM_PRTY_STS_CLR \
- 0xc42b8UL
-#define USEM_REG_FAST_MEMORY \
- 0x320000UL
-#define USEM_REG_INT_TABLE \
- 0x300400UL
-#define USEM_REG_PASSIVE_BUFFER \
- 0x302000UL
-#define USEM_REG_PRAM \
- 0x340000UL
-#define USEM_REG_USEM_INT_MASK_0 \
- 0x300110UL
-#define USEM_REG_USEM_INT_MASK_1 \
- 0x300120UL
-#define USEM_REG_USEM_PRTY_MASK_0 \
- 0x300130UL
-#define USEM_REG_USEM_PRTY_MASK_1 \
- 0x300140UL
-#define USEM_REG_USEM_PRTY_STS_CLR_0 \
- 0x300128UL
-#define USEM_REG_USEM_PRTY_STS_CLR_1 \
- 0x300138UL
-#define USEM_REG_VFPF_ERR_NUM \
- 0x300380UL
-#define VFC_MEMORIES_RST_REG_CAM_RST \
- (0x1<<0)
-#define VFC_MEMORIES_RST_REG_RAM_RST \
- (0x1<<1)
-#define VFC_REG_MEMORIES_RST \
- 0x1943cUL
-#define XCM_REG_XCM_INT_MASK \
- 0x202b4UL
-#define XCM_REG_XCM_PRTY_MASK \
- 0x202c4UL
-#define XCM_REG_XCM_PRTY_STS_CLR \
- 0x202bcUL
-#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS \
- (0x1<<0)
-#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS \
- (0x1<<1)
-#define XMAC_CTRL_REG_LINE_LOCAL_LPBK \
- (0x1<<2)
-#define XMAC_CTRL_REG_RX_EN \
- (0x1<<1)
-#define XMAC_CTRL_REG_SOFT_RESET \
- (0x1<<6)
-#define XMAC_CTRL_REG_TX_EN \
- (0x1<<0)
-#define XMAC_CTRL_REG_XLGMII_ALIGN_ENB \
- (0x1<<7)
-#define XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN \
- (0x1<<18)
-#define XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN \
- (0x1<<17)
-#define XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON \
- (0x1<<1)
-#define XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN \
- (0x1<<0)
-#define XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN \
- (0x1<<3)
-#define XMAC_PFC_CTRL_HI_REG_RX_PFC_EN \
- (0x1<<4)
-#define XMAC_PFC_CTRL_HI_REG_TX_PFC_EN \
- (0x1<<5)
-#define XMAC_REG_CLEAR_RX_LSS_STATUS \
- 0x60UL
-#define XMAC_REG_CTRL \
- 0UL
-#define XMAC_REG_CTRL_SA_HI \
- 0x2cUL
-#define XMAC_REG_CTRL_SA_LO \
- 0x28UL
-#define XMAC_REG_EEE_CTRL \
- 0xd8UL
-#define XMAC_REG_EEE_TIMERS_HI \
- 0xe4UL
-#define XMAC_REG_PAUSE_CTRL \
- 0x68UL
-#define XMAC_REG_PFC_CTRL \
- 0x70UL
-#define XMAC_REG_PFC_CTRL_HI \
- 0x74UL
-#define XMAC_REG_RX_LSS_CTRL \
- 0x50UL
-#define XMAC_REG_RX_LSS_STATUS \
- 0x58UL
-#define XMAC_REG_RX_MAX_SIZE \
- 0x40UL
-#define XMAC_REG_TX_CTRL \
- 0x20UL
-#define XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE \
- (0x1<<0)
-#define XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE \
- (0x1<<1)
-#define XSDM_REG_OPERATION_GEN \
- 0x1664c4UL
-#define XSDM_REG_XSDM_INT_MASK_0 \
- 0x16629cUL
-#define XSDM_REG_XSDM_INT_MASK_1 \
- 0x1662acUL
-#define XSDM_REG_XSDM_PRTY_MASK \
- 0x1662bcUL
-#define XSDM_REG_XSDM_PRTY_STS_CLR \
- 0x1662b4UL
-#define XSEM_REG_FAST_MEMORY \
- 0x2a0000UL
-#define XSEM_REG_INT_TABLE \
- 0x280400UL
-#define XSEM_REG_PASSIVE_BUFFER \
- 0x282000UL
-#define XSEM_REG_PRAM \
- 0x2c0000UL
-#define XSEM_REG_VFPF_ERR_NUM \
- 0x280380UL
-#define XSEM_REG_XSEM_INT_MASK_0 \
- 0x280110UL
-#define XSEM_REG_XSEM_INT_MASK_1 \
- 0x280120UL
-#define XSEM_REG_XSEM_PRTY_MASK_0 \
- 0x280130UL
-#define XSEM_REG_XSEM_PRTY_MASK_1 \
- 0x280140UL
-#define XSEM_REG_XSEM_PRTY_STS_CLR_0 \
- 0x280128UL
-#define XSEM_REG_XSEM_PRTY_STS_CLR_1 \
- 0x280138UL
-#define MCPR_ACCESS_LOCK_LOCK (1L<<31)
-#define MCPR_IMC_COMMAND_ENABLE (1L<<31)
-#define MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT 16
-#define MCPR_IMC_COMMAND_OPERATION_BITSHIFT 28
-#define MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT 8
-#define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
-#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
-#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
-#define MCPR_NVM_CFG4_FLASH_SIZE (0x7L<<0)
-#define MCPR_NVM_COMMAND_DOIT (1L<<4)
-#define MCPR_NVM_COMMAND_DONE (1L<<3)
-#define MCPR_NVM_COMMAND_FIRST (1L<<7)
-#define MCPR_NVM_COMMAND_LAST (1L<<8)
-#define MCPR_NVM_COMMAND_WR (1L<<5)
-#define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9)
-#define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5)
-#define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1)
-
-
-#define BIGMAC_REGISTER_BMAC_CONTROL (0x00<<3)
-#define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01<<3)
-#define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05<<3)
-#define BIGMAC_REGISTER_RX_CONTROL (0x21<<3)
-#define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46<<3)
-#define BIGMAC_REGISTER_RX_LSS_STATUS (0x43<<3)
-#define BIGMAC_REGISTER_RX_MAX_SIZE (0x23<<3)
-#define BIGMAC_REGISTER_RX_STAT_GR64 (0x26<<3)
-#define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42<<3)
-#define BIGMAC_REGISTER_TX_CONTROL (0x07<<3)
-#define BIGMAC_REGISTER_TX_MAX_SIZE (0x09<<3)
-#define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A<<3)
-#define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3)
-#define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3)
-#define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3)
-#define BIGMAC2_REGISTER_BMAC_CONTROL (0x00<<3)
-#define BIGMAC2_REGISTER_BMAC_XGXS_CONTROL (0x01<<3)
-#define BIGMAC2_REGISTER_CNT_MAX_SIZE (0x05<<3)
-#define BIGMAC2_REGISTER_PFC_CONTROL (0x06<<3)
-#define BIGMAC2_REGISTER_RX_CONTROL (0x3A<<3)
-#define BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS (0x62<<3)
-#define BIGMAC2_REGISTER_RX_LSS_STAT (0x3E<<3)
-#define BIGMAC2_REGISTER_RX_MAX_SIZE (0x3C<<3)
-#define BIGMAC2_REGISTER_RX_STAT_GR64 (0x40<<3)
-#define BIGMAC2_REGISTER_RX_STAT_GRIPJ (0x5f<<3)
-#define BIGMAC2_REGISTER_TX_CONTROL (0x1C<<3)
-#define BIGMAC2_REGISTER_TX_MAX_SIZE (0x1E<<3)
-#define BIGMAC2_REGISTER_TX_PAUSE_CONTROL (0x20<<3)
-#define BIGMAC2_REGISTER_TX_SOURCE_ADDR (0x1D<<3)
-#define BIGMAC2_REGISTER_TX_STAT_GTBYT (0x39<<3)
-#define BIGMAC2_REGISTER_TX_STAT_GTPOK (0x22<<3)
-
-
-#define EMAC_LED_1000MB_OVERRIDE (1L<<1)
-#define EMAC_LED_100MB_OVERRIDE (1L<<2)
-#define EMAC_LED_10MB_OVERRIDE (1L<<3)
-#define EMAC_LED_OVERRIDE (1L<<0)
-#define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26)
-#define EMAC_MDIO_COMM_COMMAND_READ_22 (2L<<26)
-#define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26)
-#define EMAC_MDIO_COMM_COMMAND_WRITE_22 (1L<<26)
-#define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26)
-#define EMAC_MDIO_COMM_DATA (0xffffL<<0)
-#define EMAC_MDIO_COMM_START_BUSY (1L<<29)
-#define EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
-#define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31)
-#define EMAC_MDIO_MODE_CLOCK_CNT (0x3ffL<<16)
-#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16
-#define EMAC_MDIO_STATUS_10MB (1L<<1)
-#define EMAC_MODE_25G_MODE (1L<<5)
-#define EMAC_MODE_HALF_DUPLEX (1L<<1)
-#define EMAC_MODE_PORT_GMII (2L<<2)
-#define EMAC_MODE_PORT_MII (1L<<2)
-#define EMAC_MODE_PORT_MII_10M (3L<<2)
-#define EMAC_MODE_RESET (1L<<0)
-#define EMAC_REG_EMAC_LED 0xc
-#define EMAC_REG_EMAC_MAC_MATCH 0x10
-#define EMAC_REG_EMAC_MDIO_COMM 0xac
-#define EMAC_REG_EMAC_MDIO_MODE 0xb4
-#define EMAC_REG_EMAC_MDIO_STATUS 0xb0
-#define EMAC_REG_EMAC_MODE 0x0
-#define EMAC_REG_EMAC_RX_MODE 0xc8
-#define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c
-#define EMAC_REG_EMAC_RX_STAT_AC 0x180
-#define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4
-#define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23
-#define EMAC_REG_EMAC_TX_MODE 0xbc
-#define EMAC_REG_EMAC_TX_STAT_AC 0x280
-#define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22
-#define EMAC_REG_RX_PFC_MODE 0x320
-#define EMAC_REG_RX_PFC_MODE_PRIORITIES (1L<<2)
-#define EMAC_REG_RX_PFC_MODE_RX_EN (1L<<1)
-#define EMAC_REG_RX_PFC_MODE_TX_EN (1L<<0)
-#define EMAC_REG_RX_PFC_PARAM 0x324
-#define EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT 0
-#define EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT 16
-#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD 0x328
-#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT (0xffff<<0)
-#define EMAC_REG_RX_PFC_STATS_XOFF_SENT 0x330
-#define EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT (0xffff<<0)
-#define EMAC_REG_RX_PFC_STATS_XON_RCVD 0x32c
-#define EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT (0xffff<<0)
-#define EMAC_REG_RX_PFC_STATS_XON_SENT 0x334
-#define EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT (0xffff<<0)
-#define EMAC_RX_MODE_FLOW_EN (1L<<2)
-#define EMAC_RX_MODE_KEEP_MAC_CONTROL (1L<<3)
-#define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10)
-#define EMAC_RX_MODE_PROMISCUOUS (1L<<8)
-#define EMAC_RX_MODE_RESET (1L<<0)
-#define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31)
-#define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
-#define EMAC_TX_MODE_FLOW_EN (1L<<4)
-#define EMAC_TX_MODE_RESET (1L<<0)
-
-
-#define MISC_REGISTERS_GPIO_0 0
-#define MISC_REGISTERS_GPIO_1 1
-#define MISC_REGISTERS_GPIO_2 2
-#define MISC_REGISTERS_GPIO_3 3
-#define MISC_REGISTERS_GPIO_CLR_POS 16
-#define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24)
-#define MISC_REGISTERS_GPIO_FLOAT_POS 24
-#define MISC_REGISTERS_GPIO_HIGH 1
-#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2
-#define MISC_REGISTERS_GPIO_INT_CLR_POS 24
-#define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR 0
-#define MISC_REGISTERS_GPIO_INT_OUTPUT_SET 1
-#define MISC_REGISTERS_GPIO_INT_SET_POS 16
-#define MISC_REGISTERS_GPIO_LOW 0
-#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1
-#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0
-#define MISC_REGISTERS_GPIO_PORT_SHIFT 4
-#define MISC_REGISTERS_GPIO_SET_POS 8
-#define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588
-#define MISC_REGISTERS_RESET_REG_1_RST_BRB1 (0x1<<0)
-#define MISC_REGISTERS_RESET_REG_1_RST_DORQ \
- (0x1<<19)
-#define MISC_REGISTERS_RESET_REG_1_RST_HC \
- (0x1<<29)
-#define MISC_REGISTERS_RESET_REG_1_RST_PXP \
- (0x1<<26)
-#define MISC_REGISTERS_RESET_REG_1_RST_PXPV \
- (0x1<<27)
-#define MISC_REGISTERS_RESET_REG_1_RST_QM \
- (0x1<<17)
-#define MISC_REGISTERS_RESET_REG_1_SET 0x584
-#define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598
-#define MISC_REGISTERS_RESET_REG_2_MSTAT0 \
- (0x1<<24)
-#define MISC_REGISTERS_RESET_REG_2_MSTAT1 \
- (0x1<<25)
-#define MISC_REGISTERS_RESET_REG_2_PGLC \
- (0x1<<19)
-#define MISC_REGISTERS_RESET_REG_2_RST_ATC \
- (0x1<<17)
-#define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0)
-#define MISC_REGISTERS_RESET_REG_2_RST_BMAC1 (0x1<<1)
-#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0 (0x1<<2)
-#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE \
- (0x1<<14)
-#define MISC_REGISTERS_RESET_REG_2_RST_EMAC1 (0x1<<3)
-#define MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE \
- (0x1<<15)
-#define MISC_REGISTERS_RESET_REG_2_RST_GRC (0x1<<4)
-#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B (0x1<<6)
-#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE (0x1<<8)
-#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU (0x1<<7)
-#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE (0x1<<5)
-#define MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE \
- (0x1<<11)
-#define MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO \
- (0x1<<13)
-#define MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR \
- (0x1<<16)
-#define MISC_REGISTERS_RESET_REG_2_RST_RBCN (0x1<<9)
-#define MISC_REGISTERS_RESET_REG_2_SET 0x594
-#define MISC_REGISTERS_RESET_REG_2_UMAC0 \
- (0x1<<20)
-#define MISC_REGISTERS_RESET_REG_2_UMAC1 \
- (0x1<<21)
-#define MISC_REGISTERS_RESET_REG_2_XMAC \
- (0x1<<22)
-#define MISC_REGISTERS_RESET_REG_2_XMAC_SOFT \
- (0x1<<23)
-#define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8
-#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1<<1)
-#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1<<2)
-#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3)
-#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1<<0)
-#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1<<5)
-#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1<<6)
-#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1<<7)
-#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4)
-#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
-#define MISC_REGISTERS_RESET_REG_3_SET 0x5a4
-#define MISC_SPIO_CLR_POS 16
-#define MISC_SPIO_FLOAT (0xffL<<24)
-#define MISC_SPIO_FLOAT_POS 24
-#define MISC_SPIO_INPUT_HI_Z 2
-#define MISC_SPIO_INT_OLD_SET_POS 16
-#define MISC_SPIO_OUTPUT_HIGH 1
-#define MISC_SPIO_OUTPUT_LOW 0
-#define MISC_SPIO_SET_POS 8
-#define MISC_SPIO_SPIO4 0x10
-#define MISC_SPIO_SPIO5 0x20
-#define HW_LOCK_MAX_RESOURCE_VALUE 31
-#define HW_LOCK_RESOURCE_DRV_FLAGS 10
-#define HW_LOCK_RESOURCE_GPIO 1
-#define HW_LOCK_RESOURCE_MDIO 0
-#define HW_LOCK_RESOURCE_NVRAM 12
-#define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3
-#define HW_LOCK_RESOURCE_RECOVERY_LEADER_0 8
-#define HW_LOCK_RESOURCE_RECOVERY_LEADER_1 9
-#define HW_LOCK_RESOURCE_RECOVERY_REG 11
-#define HW_LOCK_RESOURCE_RESET 5
-#define HW_LOCK_RESOURCE_SPIO 2
-
-
-#define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4)
-#define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5)
-#define AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT (0x1<<19)
-#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18)
-#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (0x1<<31)
-#define AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR (0x1<<30)
-#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (0x1<<9)
-#define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (0x1<<8)
-#define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (0x1<<7)
-#define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (0x1<<6)
-#define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (0x1<<29)
-#define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (0x1<<28)
-#define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (0x1<<1)
-#define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (0x1<<0)
-#define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (0x1<<18)
-#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (0x1<<11)
-#define AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR (0x1<<10)
-#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (0x1<<13)
-#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (0x1<<12)
-#define AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 (0x1<<2)
-#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (0x1<<12)
-#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY (0x1<<28)
-#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY (0x1UL<<31)
-#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY (0x1<<29)
-#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY (0x1<<30)
-#define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (0x1<<15)
-#define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (0x1<<14)
-#define AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR (0x1<<14)
-#define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (0x1<<20)
-#define AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT (0x1UL<<31)
-#define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (0x1<<30)
-#define AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR (0x1<<0)
-#define AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT (0x1<<2)
-#define AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR (0x1<<3)
-#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (0x1<<5)
-#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (0x1<<4)
-#define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (0x1<<3)
-#define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (0x1<<2)
-#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (0x1<<3)
-#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (0x1<<2)
-#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (0x1<<22)
-#define AEU_INPUTS_ATTN_BITS_SPIO5 (0x1<<15)
-#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (0x1<<27)
-#define AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR (0x1<<26)
-#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (0x1<<5)
-#define AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR (0x1<<4)
-#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (0x1<<25)
-#define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (0x1<<24)
-#define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (0x1<<29)
-#define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (0x1<<28)
-#define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (0x1<<23)
-#define AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR (0x1<<22)
-#define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (0x1<<27)
-#define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (0x1<<26)
-#define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (0x1<<21)
-#define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (0x1<<20)
-#define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (0x1<<25)
-#define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (0x1<<24)
-#define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (0x1<<16)
-#define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (0x1<<9)
-#define AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR (0x1<<8)
-#define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (0x1<<7)
-#define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (0x1<<6)
-#define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (0x1<<11)
-#define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (0x1<<10)
-#define HW_PRTY_ASSERT_SET_0 \
-(AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR)
-#define HW_PRTY_ASSERT_SET_1 \
-(AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR)
-#define HW_PRTY_ASSERT_SET_2 \
-(AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR)
-#define HW_PRTY_ASSERT_SET_3 \
-(AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
- AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
- AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \
- AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
-#define HW_PRTY_ASSERT_SET_4 \
-(AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |\
- AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)
-#define HW_INTERRUT_ASSERT_SET_0 \
-(AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT)
-#define HW_INTERRUT_ASSERT_SET_1 \
-(AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT)
-#define HW_INTERRUT_ASSERT_SET_2 \
-(AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT |\
- AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT)
-
-
+#define ATC_ATC_INT_STS_REG_ADDRESS_ERROR (0x1 << 0)
+#define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS (0x1 << 2)
+#define ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU (0x1 << 5)
+#define ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT (0x1 << 3)
+#define ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR (0x1 << 4)
+#define ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND (0x1 << 1)
+/* [R 1] ATC initialization done */
+#define ATC_REG_ATC_INIT_DONE 0x1100bc
+/* [RW 6] Interrupt mask register #0 read/write */
+#define ATC_REG_ATC_INT_MASK 0x1101c8
+/* [R 6] Interrupt register #0 read */
+#define ATC_REG_ATC_INT_STS 0x1101bc
+/* [RC 6] Interrupt register #0 read clear */
+#define ATC_REG_ATC_INT_STS_CLR 0x1101c0
+/* [RW 5] Parity mask register #0 read/write */
+#define ATC_REG_ATC_PRTY_MASK 0x1101d8
+/* [R 5] Parity register #0 read */
+#define ATC_REG_ATC_PRTY_STS 0x1101cc
+/* [RC 5] Parity register #0 read clear */
+#define ATC_REG_ATC_PRTY_STS_CLR 0x1101d0
+/* [RW 19] Interrupt mask register #0 read/write */
+#define BRB1_REG_BRB1_INT_MASK 0x60128
+/* [R 19] Interrupt register #0 read */
+#define BRB1_REG_BRB1_INT_STS 0x6011c
+/* [RC 19] Interrupt register #0 read clear */
+#define BRB1_REG_BRB1_INT_STS_CLR 0x60120
+/* [RW 4] Parity mask register #0 read/write */
+#define BRB1_REG_BRB1_PRTY_MASK 0x60138
+/* [R 4] Parity register #0 read */
+#define BRB1_REG_BRB1_PRTY_STS 0x6012c
+/* [RC 4] Parity register #0 read clear */
+#define BRB1_REG_BRB1_PRTY_STS_CLR 0x60130
+/* [RW 11] The number of blocks guarantied for the MAC port. The register is
+ * applicable only when per_class_guaranty_mode is reset.
+ */
+#define BRB1_REG_MAC_GUARANTIED_0 0x601e8
+#define BRB1_REG_MAC_GUARANTIED_1 0x60240
+/* [R 24] The number of full blocks. */
+#define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090
+/* [RW 10] Write client 0: De-assert pause threshold. Not Functional */
+#define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078
+/* [RW 10] Write client 0: Assert pause threshold. Not Functional */
+#define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068
+/* [R 24] The number of full blocks occupied by port. */
+#define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094
+/* [R 5] Used to read the value of the XX protection CAM occupancy counter. */
+#define CCM_REG_CAM_OCCUP 0xd0188
+/* [RW 11] Interrupt mask register #0 read/write */
+#define CCM_REG_CCM_INT_MASK 0xd01e4
+/* [R 11] Interrupt register #0 read */
+#define CCM_REG_CCM_INT_STS 0xd01d8
+/* [RC 11] Interrupt register #0 read clear */
+#define CCM_REG_CCM_INT_STS_CLR 0xd01dc
+/* [RW 27] Parity mask register #0 read/write */
+#define CCM_REG_CCM_PRTY_MASK 0xd01f4
+/* [R 27] Parity register #0 read */
+#define CCM_REG_CCM_PRTY_STS 0xd01e8
+/* [RC 27] Parity register #0 read clear */
+#define CCM_REG_CCM_PRTY_STS_CLR 0xd01ec
+/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
+ * the initial credit value; read returns the current value of the credit
+ * counter. Must be initialized to 1 at start-up.
+ */
+#define CCM_REG_CFC_INIT_CRD 0xd0204
+/* [RW 6] QM output initial credit. Max credit available - 32. Write writes
+ * the initial credit value; read returns the current value of the credit
+ * counter. Must be initialized to 32 at start-up.
+ */
+#define CCM_REG_CQM_INIT_CRD 0xd020c
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ * at the SDM interface is detected.
+ */
+#define CCM_REG_CSDM_LENGTH_MIS 0xd0170
+/* [RW 8] FIC0 output initial credit. Max credit available - 255. Write
+ * writes the initial credit value; read returns the current value of the
+ * credit counter. Must be initialized to 64 at start-up.
+ */
+#define CCM_REG_FIC0_INIT_CRD 0xd0210
+/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
+ * writes the initial credit value; read returns the current value of the
+ * credit counter. Must be initialized to 64 at start-up.
+ */
+#define CCM_REG_FIC1_INIT_CRD 0xd0214
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ * at the pbf interface is detected.
+ */
+#define CCM_REG_PBF_LENGTH_MIS 0xd0180
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ * at the STORM interface is detected.
+ */
+#define CCM_REG_STORM_LENGTH_MIS 0xd016c
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ * at the tsem interface is detected.
+ */
+#define CCM_REG_TSEM_LENGTH_MIS 0xd0174
+/* [RC 1] Set when message length mismatch (relative to last indication) at
+ * the usem interface is detected.
+ */
+#define CCM_REG_USEM_LENGTH_MIS 0xd017c
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ * at the xsem interface is detected.
+ */
+#define CCM_REG_XSEM_LENGTH_MIS 0xd0178
+/* [RW 19] Indirect access to the descriptor table of the XX protection
+ * mechanism. The fields are: [5:0] - message length; [12:6] - message
+ * pointer; 18:13] - next pointer.
+ */
+#define CCM_REG_XX_DESCR_TABLE 0xd0300
+#define CCM_REG_XX_DESCR_TABLE_SIZE 24
+/* [R 7] Used to read the value of XX protection Free counter. */
+#define CCM_REG_XX_FREE 0xd0184
+#define CDU_REG_CDU_GLOBAL_PARAMS 0x101020
+/* [RW 7] Interrupt mask register #0 read/write */
+#define CDU_REG_CDU_INT_MASK 0x10103c
+/* [R 7] Interrupt register #0 read */
+#define CDU_REG_CDU_INT_STS 0x101030
+/* [RC 7] Interrupt register #0 read clear */
+#define CDU_REG_CDU_INT_STS_CLR 0x101034
+/* [RW 5] Parity mask register #0 read/write */
+#define CDU_REG_CDU_PRTY_MASK 0x10104c
+/* [R 5] Parity register #0 read */
+#define CDU_REG_CDU_PRTY_STS 0x101040
+/* [RC 5] Parity register #0 read clear */
+#define CDU_REG_CDU_PRTY_STS_CLR 0x101044
+/* [RW 32] logging of error data in case of a CDU load error:
+ * {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
+ * ype_error; ctual_active; ctual_compressed_context};
+ */
+#define CDU_REG_ERROR_DATA 0x101014
+/* [RW 13] activity counter ram access */
+#define CFC_REG_ACTIVITY_COUNTER 0x104400
+#define CFC_REG_ACTIVITY_COUNTER_SIZE 256
+/* [R 1] indication the initializing the activity counter by the hardware
+ * was done.
+ */
+#define CFC_REG_AC_INIT_DONE 0x104078
+/* [R 1] indication the initializing the cams by the hardware was done. */
+#define CFC_REG_CAM_INIT_DONE 0x10407c
+/* [RW 2] Interrupt mask register #0 read/write */
+#define CFC_REG_CFC_INT_MASK 0x104108
+/* [R 2] Interrupt register #0 read */
+#define CFC_REG_CFC_INT_STS 0x1040fc
+/* [RC 2] Interrupt register #0 read clear */
+#define CFC_REG_CFC_INT_STS_CLR 0x104100
+/* [RW 6] Parity mask register #0 read/write */
+#define CFC_REG_CFC_PRTY_MASK 0x104118
+/* [R 6] Parity register #0 read */
+#define CFC_REG_CFC_PRTY_STS 0x10410c
+/* [RC 6] Parity register #0 read clear */
+#define CFC_REG_CFC_PRTY_STS_CLR 0x104110
+/* [RW 21] CID cam access (21:1 - Data; alid - 0) */
+#define CFC_REG_CID_CAM 0x104800
+#define CFC_REG_DEBUG0 0x104050
+/* [R 16] CFC error vector. when the CFC detects an internal error it will
+ * set one of these bits. the bit description can be found in CFC
+ * specifications
+ */
+#define CFC_REG_ERROR_VECTOR 0x10403c
+/* [WB 97] LCID info ram access = {96-vpf; 5:93-pfid; 2:89-type;
+ * 8:85-action; 4-paddrv; 3:20-paddr; 9:4-rstates; -lsf; :0-lstate}
+ */
+#define CFC_REG_INFO_RAM 0x105000
+#define CFC_REG_INFO_RAM_SIZE 1024
+#define CFC_REG_INIT_REG 0x10404c
+/* [RW 22] Link List ram access; data = {prev_pfid; rev_lcid; ext_pfid;
+ * ext_lcid}
+ */
+#define CFC_REG_LINK_LIST 0x104c00
+#define CFC_REG_LINK_LIST_SIZE 256
+/* [R 1] indication the initializing the link list by the hardware was done. */
+#define CFC_REG_LL_INIT_DONE 0x104074
+/* [R 9] Number of allocated LCIDs which are at empty state */
+#define CFC_REG_NUM_LCIDS_ALLOC 0x104020
+/* [R 9] Number of Arriving LCIDs in Link List Block */
+#define CFC_REG_NUM_LCIDS_ARRIVING 0x104004
+#define CFC_REG_NUM_LCIDS_INSIDE_PF 0x104120
+/* [R 9] Number of Leaving LCIDs in Link List Block */
+#define CFC_REG_NUM_LCIDS_LEAVING 0x104018
+#define CFC_REG_STRONG_ENABLE_PF 0x104128
+#define CFC_REG_WEAK_ENABLE_PF 0x104124
+/* [RW 32] Interrupt mask register #0 read/write */
+#define CSDM_REG_CSDM_INT_MASK_0 0xc229c
+#define CSDM_REG_CSDM_INT_MASK_1 0xc22ac
+/* [R 32] Interrupt register #0 read */
+#define CSDM_REG_CSDM_INT_STS_0 0xc2290
+#define CSDM_REG_CSDM_INT_STS_1 0xc22a0
+/* [RC 32] Interrupt register #0 read clear */
+#define CSDM_REG_CSDM_INT_STS_CLR_0 0xc2294
+#define CSDM_REG_CSDM_INT_STS_CLR_1 0xc22a4
+/* [RW 11] Parity mask register #0 read/write */
+#define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
+/* [R 11] Parity register #0 read */
+#define CSDM_REG_CSDM_PRTY_STS 0xc22b0
+/* [RC 11] Parity register #0 read clear */
+#define CSDM_REG_CSDM_PRTY_STS_CLR 0xc22b4
+/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
+#define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc2548
+/* [R 1] parser fifo empty in sdm_sync block */
+#define CSDM_REG_SYNC_PARSER_EMPTY 0xc2550
+/* [R 1] parser serial fifo empty in sdm_sync block */
+#define CSDM_REG_SYNC_SYNC_EMPTY 0xc2558
+/* [RW 32] Interrupt mask register #0 read/write */
+#define CSEM_REG_CSEM_INT_MASK_0 0x200110
+#define CSEM_REG_CSEM_INT_MASK_1 0x200120
+/* [R 32] Interrupt register #0 read */
+#define CSEM_REG_CSEM_INT_STS_0 0x200104
+#define CSEM_REG_CSEM_INT_STS_1 0x200114
+/* [RC 32] Interrupt register #0 read clear */
+#define CSEM_REG_CSEM_INT_STS_CLR_0 0x200108
+#define CSEM_REG_CSEM_INT_STS_CLR_1 0x200118
+/* [RW 32] Parity mask register #0 read/write */
+#define CSEM_REG_CSEM_PRTY_MASK_0 0x200130
+#define CSEM_REG_CSEM_PRTY_MASK_1 0x200140
+/* [R 32] Parity register #0 read */
+#define CSEM_REG_CSEM_PRTY_STS_0 0x200124
+#define CSEM_REG_CSEM_PRTY_STS_1 0x200134
+/* [RC 32] Parity register #0 read clear */
+#define CSEM_REG_CSEM_PRTY_STS_CLR_0 0x200128
+#define CSEM_REG_CSEM_PRTY_STS_CLR_1 0x200138
+/* [RW 32] This address space contains all registers and memories that are
+ * placed in SEM_FAST block. The SEM_FAST registers are described in
+ * appendix B. In order to access the SEM_FAST registers the base address
+ * CSEM_REGISTERS_FAST_MEMORY (Offset: 0x220000) should be added to each
+ * SEM_FAST register offset.
+ */
+#define CSEM_REG_FAST_MEMORY 0x220000
+/* [RW 15] Interrupt table Read and write access to it is not possible in
+ * the middle of the work
+ */
+#define CSEM_REG_INT_TABLE 0x200400
+/* [WB 128] Debug only. Passive buffer memory */
+#define CSEM_REG_PASSIVE_BUFFER 0x202000
+/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
+#define CSEM_REG_PRAM 0x240000
+/* [R 20] Valid sleeping threads indication have bit per thread */
+#define CSEM_REG_SLEEP_THREADS_VALID 0x20026c
+/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
+#define CSEM_REG_SLOW_EXT_STORE_EMPTY 0x2002a0
+/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
+ * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid.
+ */
+#define CSEM_REG_VFPF_ERR_NUM 0x200380
+/* [RW 2] Interrupt mask register #0 read/write */
+#define DBG_REG_DBG_INT_MASK 0xc098
+/* [R 2] Interrupt register #0 read */
+#define DBG_REG_DBG_INT_STS 0xc08c
+/* [RC 2] Interrupt register #0 read clear */
+#define DBG_REG_DBG_INT_STS_CLR 0xc090
+/* [RW 1] Parity mask register #0 read/write */
+#define DBG_REG_DBG_PRTY_MASK 0xc0a8
+/* [R 1] Parity register #0 read */
+#define DBG_REG_DBG_PRTY_STS 0xc09c
+/* [RC 1] Parity register #0 read clear */
+#define DBG_REG_DBG_PRTY_STS_CLR 0xc0a0
+/* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The
+ * function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID = 0;
+ * 4.Completion function=0; 5.Error handling = 0
+ */
+#define DMAE_REG_BACKWARD_COMP_EN 0x10207c
+/* [RW 32] Commands memory. The address to command X; row Y is to calculated
+ * as 14 * X+Y.
+ */
+#define DMAE_REG_CMD_MEM 0x102400
+#define DMAE_REG_CMD_MEM_SIZE 224
+/* [RW 2] Interrupt mask register #0 read/write */
+#define DMAE_REG_DMAE_INT_MASK 0x102054
+/* [R 2] Interrupt register #0 read */
+#define DMAE_REG_DMAE_INT_STS 0x102048
+/* [RC 2] Interrupt register #0 read clear */
+#define DMAE_REG_DMAE_INT_STS_CLR 0x10204c
+/* [RW 4] Parity mask register #0 read/write */
+#define DMAE_REG_DMAE_PRTY_MASK 0x102064
+/* [R 4] Parity register #0 read */
+#define DMAE_REG_DMAE_PRTY_STS 0x102058
+/* [RC 4] Parity register #0 read clear */
+#define DMAE_REG_DMAE_PRTY_STS_CLR 0x10205c
+/* [RW 1] Command 0 go. */
+#define DMAE_REG_GO_C0 0x102080
+/* [RW 1] Command 1 go. */
+#define DMAE_REG_GO_C1 0x102084
+/* [RW 1] Command 10 go. */
+#define DMAE_REG_GO_C10 0x102088
+/* [RW 1] Command 11 go. */
+#define DMAE_REG_GO_C11 0x10208c
+/* [RW 1] Command 12 go. */
+#define DMAE_REG_GO_C12 0x102090
+/* [RW 1] Command 13 go. */
+#define DMAE_REG_GO_C13 0x102094
+/* [RW 1] Command 14 go. */
+#define DMAE_REG_GO_C14 0x102098
+/* [RW 1] Command 15 go. */
+#define DMAE_REG_GO_C15 0x10209c
+/* [RW 1] Command 2 go. */
+#define DMAE_REG_GO_C2 0x1020a0
+/* [RW 1] Command 3 go. */
+#define DMAE_REG_GO_C3 0x1020a4
+/* [RW 1] Command 4 go. */
+#define DMAE_REG_GO_C4 0x1020a8
+/* [RW 1] Command 5 go. */
+#define DMAE_REG_GO_C5 0x1020ac
+/* [RW 1] Command 6 go. */
+#define DMAE_REG_GO_C6 0x1020b0
+/* [RW 1] Command 7 go. */
+#define DMAE_REG_GO_C7 0x1020b4
+/* [RW 1] Command 8 go. */
+#define DMAE_REG_GO_C8 0x1020b8
+/* [RW 1] Command 9 go. */
+#define DMAE_REG_GO_C9 0x1020bc
+/* [RW 32] Doorbell address for RBC doorbells (function 0). */
+#define DORQ_REG_DB_ADDR0 0x17008c
+/* [RW 6] Interrupt mask register #0 read/write */
+#define DORQ_REG_DORQ_INT_MASK 0x170180
+/* [R 6] Interrupt register #0 read */
+#define DORQ_REG_DORQ_INT_STS 0x170174
+/* [RC 6] Interrupt register #0 read clear */
+#define DORQ_REG_DORQ_INT_STS_CLR 0x170178
+/* [RW 2] Parity mask register #0 read/write */
+#define DORQ_REG_DORQ_PRTY_MASK 0x170190
+/* [R 2] Parity register #0 read */
+#define DORQ_REG_DORQ_PRTY_STS 0x170184
+/* [RC 2] Parity register #0 read clear */
+#define DORQ_REG_DORQ_PRTY_STS_CLR 0x170188
+/* [R 13] Current value of the DQ FIFO fill level according to following
+ * pointer. The range is 0 - 256 FIFO rows; where each row stands for the
+ * doorbell.
+ */
+#define DORQ_REG_DQ_FILL_LVLF 0x1700a4
+/* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or
+ * equal to full threshold; reset on full clear.
+ */
+#define DORQ_REG_DQ_FULL_ST 0x1700c0
+#define DORQ_REG_MAX_RVFID_SIZE 0x1701ec
+#define DORQ_REG_MODE_ACT 0x170008
+/* [RW 5] The normal mode CID extraction offset. */
+#define DORQ_REG_NORM_CID_OFST 0x17002c
+#define DORQ_REG_PF_USAGE_CNT 0x1701d0
+/* [R 4] Current value of response A counter credit. Initial credit is
+ * configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
+ * register.
+ */
+#define DORQ_REG_RSPA_CRD_CNT 0x1700ac
+/* [R 4] Current value of response B counter credit. Initial credit is
+ * configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
+ * register.
+ */
+#define DORQ_REG_RSPB_CRD_CNT 0x1700b0
+#define DORQ_REG_VF_NORM_CID_BASE 0x1701a0
+#define DORQ_REG_VF_NORM_CID_OFST 0x1701f4
+#define DORQ_REG_VF_NORM_CID_WND_SIZE 0x1701a4
+#define DORQ_REG_VF_NORM_VF_BASE 0x1701a8
+/* [RW 10] VF type validation mask value */
+#define DORQ_REG_VF_TYPE_MASK_0 0x170218
+/* [RW 17] VF type validation Min MCID value */
+#define DORQ_REG_VF_TYPE_MAX_MCID_0 0x1702d8
+/* [RW 17] VF type validation Max MCID value */
+#define DORQ_REG_VF_TYPE_MIN_MCID_0 0x170298
+/* [RW 10] VF type validation comp value */
+#define DORQ_REG_VF_TYPE_VALUE_0 0x170258
+#define DORQ_REG_VF_USAGE_CNT 0x170320
+#define DORQ_REG_VF_USAGE_CT_LIMIT 0x170340
+#define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1 << 4)
+#define HC_CONFIG_0_REG_BLOCK_DISABLE_0 (0x1 << 0)
+#define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1 << 3)
+#define HC_CONFIG_0_REG_MSI_ATTN_EN_0 (0x1 << 7)
+#define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1 << 2)
+#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1 << 1)
+#define HC_CONFIG_1_REG_BLOCK_DISABLE_1 (0x1 << 0)
+#define HC_REG_AGG_INT_0 0x108050
+#define HC_REG_ATTN_MSG0_ADDR_L 0x108018
+#define HC_REG_ATTN_MSG1_ADDR_L 0x108020
+#define HC_REG_COMMAND_REG 0x108180
+#define HC_REG_CONFIG_0 0x108000
+#define HC_REG_CONFIG_1 0x108004
+/* [RW 7] Interrupt mask register #0 read/write */
+#define HC_REG_HC_INT_MASK 0x108090
+/* [R 7] Interrupt register #0 read */
+#define HC_REG_HC_INT_STS 0x108084
+/* [RC 7] Interrupt register #0 read clear */
+#define HC_REG_HC_INT_STS_CLR 0x108088
+/* [RW 3] Parity mask register #0 read/write */
+#define HC_REG_HC_PRTY_MASK 0x1080a0
+/* [R 3] Parity register #0 read */
+#define HC_REG_HC_PRTY_STS 0x108094
+/* [RC 3] Parity register #0 read clear */
+#define HC_REG_HC_PRTY_STS_CLR 0x108098
+#define HC_REG_INT_MASK 0x108108
+#define HC_REG_LEADING_EDGE_0 0x108040
+#define HC_REG_MAIN_MEMORY 0x108800
+#define HC_REG_MAIN_MEMORY_SIZE 152
+#define HC_REG_TRAILING_EDGE_0 0x108044
+#define IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN (0x1 << 1)
+#define IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE (0x1 << 0)
+#define IGU_REG_ATTENTION_ACK_BITS 0x130108
+/* [R 4] Debug: attn_fsm */
+#define IGU_REG_ATTN_FSM 0x130054
+#define IGU_REG_ATTN_MSG_ADDR_H 0x13011c
+#define IGU_REG_ATTN_MSG_ADDR_L 0x130120
+/* [R 4] Debug: [3] - attention write done message is pending (0-no pending;
+ * 1-pending). [2:0] = PFID. Pending means attention message was sent; but
+ * write done didn't receive.
+ */
+#define IGU_REG_ATTN_WRITE_DONE_PENDING 0x130030
+#define IGU_REG_BLOCK_CONFIGURATION 0x130000
+#define IGU_REG_COMMAND_REG_32LSB_DATA 0x130124
+#define IGU_REG_COMMAND_REG_CTRL 0x13012c
+/* [WB_R 32] Cleanup bit status per SB. 1 = cleanup is set. 0 = cleanup bit
+ * is clear. The bits in this registers are set and clear via the producer
+ * command. Data valid only in addresses 0-4. all the rest are zero.
+ */
+#define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP 0x130200
+/* [R 5] Debug: ctrl_fsm */
+#define IGU_REG_CTRL_FSM 0x130064
+/* [R 1] data available for error memory. If this bit is clear do not red
+ * from error_handling_memory.
+ */
+#define IGU_REG_ERROR_HANDLING_DATA_VALID 0x130130
+/* [RW 11] Interrupt mask register #0 read/write */
+#define IGU_REG_IGU_INT_MASK 0x130098
+/* [R 11] Interrupt register #0 read */
+#define IGU_REG_IGU_INT_STS 0x13008c
+/* [RC 11] Interrupt register #0 read clear */
+#define IGU_REG_IGU_INT_STS_CLR 0x130090
+/* [RW 11] Parity mask register #0 read/write */
+#define IGU_REG_IGU_PRTY_MASK 0x1300a8
+/* [R 11] Parity register #0 read */
+#define IGU_REG_IGU_PRTY_STS 0x13009c
+/* [RC 11] Parity register #0 read clear */
+#define IGU_REG_IGU_PRTY_STS_CLR 0x1300a0
+/* [R 4] Debug: int_handle_fsm */
+#define IGU_REG_INT_HANDLE_FSM 0x130050
+#define IGU_REG_LEADING_EDGE_LATCH 0x130134
+/* [RW 14] mapping CAM; relevant for E2 operating mode only. [0] - valid.
+ * [6:1] - vector number; [13:7] - FID (if VF - [13] = 0; [12:7] = VF
+ * number; if PF - [13] = 1; [12:10] = 0; [9:7] = PF number);
+ */
+#define IGU_REG_MAPPING_MEMORY 0x131000
+#define IGU_REG_MAPPING_MEMORY_SIZE 136
+#define IGU_REG_PBA_STATUS_LSB 0x130138
+#define IGU_REG_PBA_STATUS_MSB 0x13013c
+#define IGU_REG_PCI_PF_MSIX_EN 0x130144
+#define IGU_REG_PCI_PF_MSIX_FUNC_MASK 0x130148
+#define IGU_REG_PCI_PF_MSI_EN 0x130140
+/* [WB_R 32] Each bit represent the pending bits status for that SB. 0 = no
+ * pending; 1 = pending. Pending means interrupt was asserted; and write
+ * done was not received. Data valid only in addresses 0-4. all the rest are
+ * zero.
+ */
+#define IGU_REG_PENDING_BITS_STATUS 0x130300
+#define IGU_REG_PF_CONFIGURATION 0x130154
+/* [RW 20] producers only. E2 mode: address 0-135 match to the mapping
+ * memory; 136 - PF0 default prod; 137 PF1 default prod; 138 - PF2 default
+ * prod; 139 PF3 default prod; 140 - PF0 - ATTN prod; 141 - PF1 - ATTN prod;
+ * 142 - PF2 - ATTN prod; 143 - PF3 - ATTN prod; 144-147 reserved. E1.5 mode
+ * - In backward compatible mode; for non default SB; each even line in the
+ * memory holds the U producer and each odd line hold the C producer. The
+ * first 128 producer are for NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The
+ * last 20 producers are for the DSB for each PF. each PF has five segments
+ * (the order inside each segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
+ * 132-135 C prods; 136-139 X prods; 140-143 T prods; 144-147 ATTN prods;
+ */
+#define IGU_REG_PROD_CONS_MEMORY 0x132000
+/* [R 3] Debug: pxp_arb_fsm */
+#define IGU_REG_PXP_ARB_FSM 0x130068
+/* [RW 6] Write one for each bit will reset the appropriate memory. When the
+ * memory reset finished the appropriate bit will be clear. Bit 0 - mapping
+ * memory; Bit 1 - SB memory; Bit 2 - SB interrupt and mask register; Bit 3
+ * - MSIX memory; Bit 4 - PBA memory; Bit 5 - statistics;
+ */
+#define IGU_REG_RESET_MEMORIES 0x130158
+/* [R 4] Debug: sb_ctrl_fsm */
+#define IGU_REG_SB_CTRL_FSM 0x13004c
+#define IGU_REG_SB_INT_BEFORE_MASK_LSB 0x13015c
+#define IGU_REG_SB_INT_BEFORE_MASK_MSB 0x130160
+#define IGU_REG_SB_MASK_LSB 0x130164
+#define IGU_REG_SB_MASK_MSB 0x130168
+/* [RW 16] Number of command that were dropped without causing an interrupt
+ * due to: read access for WO BAR address; or write access for RO BAR
+ * address or any access for reserved address or PCI function error is set
+ * and address is not MSIX; PBA or cleanup
+ */
+#define IGU_REG_SILENT_DROP 0x13016c
+/* [RW 10] Number of MSI/MSIX/ATTN messages sent for the function: 0-63 -
+ * number of MSIX messages per VF; 64-67 - number of MSI/MSIX messages per
+ * PF; 68-71 number of ATTN messages per PF
+ */
+#define IGU_REG_STATISTIC_NUM_MESSAGE_SENT 0x130800
+#define IGU_REG_TRAILING_EDGE_LATCH 0x130104
+#define IGU_REG_VF_CONFIGURATION 0x130170
+/* [WB_R 32] Each bit represent write done pending bits status for that SB
+ * (MSI/MSIX message was sent and write done was not received yet). 0 =
+ * clear; 1 = set. Data valid only in addresses 0-4. all the rest are zero.
+ */
+#define IGU_REG_WRITE_DONE_PENDING 0x130480
+#define MCP_A_REG_MCPR_SCRATCH 0x3a0000
+#define MCP_REG_MCPR_ACCESS_LOCK 0x8009c
+#define MCP_REG_MCPR_CPU_PROGRAM_COUNTER 0x8501c
+#define MCP_REG_MCPR_GP_INPUTS 0x800c0
+#define MCP_REG_MCPR_GP_OENABLE 0x800c8
+#define MCP_REG_MCPR_GP_OUTPUTS 0x800c4
+#define MCP_REG_MCPR_IMC_COMMAND 0x85900
+#define MCP_REG_MCPR_IMC_DATAREG0 0x85920
+#define MCP_REG_MCPR_IMC_SLAVE_CONTROL 0x85904
+#define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424
+#define MCP_REG_MCPR_NVM_ADDR 0x8640c
+#define MCP_REG_MCPR_NVM_CFG4 0x8642c
+#define MCP_REG_MCPR_NVM_COMMAND 0x86400
+#define MCP_REG_MCPR_NVM_READ 0x86410
+#define MCP_REG_MCPR_NVM_SW_ARB 0x86420
+#define MCP_REG_MCPR_NVM_WRITE 0x86408
+#define MCP_REG_MCPR_SCRATCH 0xa0000
+#define MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK (0x1 << 1)
+#define MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK (0x1 << 0)
+/* [R 32] read first 32 bit after inversion of function 0. mapped as
+ * follows: [0] NIG attention for function0; [1] NIG attention for
+ * function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp;
+ * [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9]
+ * GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE
+ * glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0;
+ * [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16]
+ * MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB
+ * Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw
+ * interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity
+ * error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw
+ * interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30]
+ * PBClient Parity error; [31] PBClient Hw interrupt;
+ */
+#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 0xa42c
+#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1 0xa430
+/* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0]
+ * NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
+ * mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
+ * [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
+ * PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
+ * function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
+ * Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
+ * mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
+ * BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
+ * Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
+ * interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
+ * Parity error; [29] TSEMI Hw interrupt; [30] PBClient Parity error; [31]
+ * PBClient Hw interrupt;
+ */
+#define MISC_REG_AEU_AFTER_INVERT_1_MCP 0xa434
+/* [R 32] read second 32 bit after inversion of function 0. mapped as
+ * follows: [0] PBF Parity error; [1] PBF Hw interrupt; [2] QM Parity error;
+ * [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt;
+ * [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9]
+ * XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
+ * DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
+ * error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
+ * PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
+ * [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
+ * [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
+ * [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
+ * [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt;
+ */
+#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 0xa438
+#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1 0xa43c
+/* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0]
+ * PBF Parity error; [1] PBF Hw interrupt; [2] QM Parity error; [3] QM Hw
+ * interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM
+ * Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw
+ * interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
+ * DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
+ * error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
+ * PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
+ * [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
+ * [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
+ * [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
+ * [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt;
+ */
+#define MISC_REG_AEU_AFTER_INVERT_2_MCP 0xa440
+/* [R 32] read third 32 bit after inversion of function 0. mapped as
+ * follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity
+ * error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5]
+ * PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
+ * interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
+ * error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
+ * Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
+ * pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
+ * MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
+ * SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
+ * timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
+ * func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
+ * attn1;
+ */
+#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 0xa444
+#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1 0xa448
+/* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0]
+ * CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP
+ * Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient
+ * Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity
+ * error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw
+ * interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14]
+ * MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17]
+ * Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW
+ * timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3
+ * func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1
+ * func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW
+ * timers attn_4 func1; [30] General attn0; [31] General attn1;
+ */
+#define MISC_REG_AEU_AFTER_INVERT_3_MCP 0xa44c
+/* [R 32] read fourth 32 bit after inversion of function 0. mapped as
+ * follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
+ * General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
+ * [7] General attn9; [8] General attn10; [9] General attn11; [10] General
+ * attn12; [11] General attn13; [12] General attn14; [13] General attn15;
+ * [14] General attn16; [15] General attn17; [16] General attn18; [17]
+ * General attn19; [18] General attn20; [19] General attn21; [20] Main power
+ * interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
+ * Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
+ * Latched timeout attention; [27] GRC Latched reserved access attention;
+ * [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
+ * Latched ump_tx_parity; [31] MCP Latched scpad_parity;
+ */
+#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 0xa450
+#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1 0xa454
+/* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0]
+ * General attn2; [1] General attn3; [2] General attn4; [3] General attn5;
+ * [4] General attn6; [5] General attn7; [6] General attn8; [7] General
+ * attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11]
+ * General attn13; [12] General attn14; [13] General attn15; [14] General
+ * attn16; [15] General attn17; [16] General attn18; [17] General attn19;
+ * [18] General attn20; [19] General attn21; [20] Main power interrupt; [21]
+ * RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24]
+ * RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout
+ * attention; [27] GRC Latched reserved access attention; [28] MCP Latched
+ * rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched
+ * ump_tx_parity; [31] MCP Latched scpad_parity;
+ */
+#define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458
+/* [R 32] Read fifth 32 bit after inversion of function 0. Mapped as
+ * follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
+ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
+ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
+ * parity; [31-10] Reserved;
+ */
+#define MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 0xa700
+/* [W 14] write to this register results with the clear of the latched
+ * signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in
+ * d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP
+ * latch; one in d5 clears GRC Latched timeout attention; one in d6 clears
+ * GRC Latched reserved access attention; one in d7 clears Latched
+ * rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears
+ * Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both
+ * ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears
+ * pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read
+ * from this register return zero
+ */
+#define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c
+/* [RW 32] first 32b for enabling the output for function 0 output0. mapped
+ * as follows: [0] NIG attention for function0; [1] NIG attention for
+ * function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
+ * 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
+ * GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
+ * function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
+ * Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
+ * SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
+ * indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
+ * [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
+ * SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
+ * TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
+ * TSEMI Hw interrupt; [30] PBClient Parity error; [31] PBClient Hw
+ * interrupt;
+ */
+#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c
+#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c
+#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c
+/* [RW 32] first 32b for enabling the output for function 1 output0. mapped
+ * as follows: [0] NIG attention for function0; [1] NIG attention for
+ * function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function
+ * 1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
+ * GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
+ * function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
+ * Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
+ * SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X
+ * indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
+ * [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
+ * SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
+ * TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
+ * TSEMI Hw interrupt; [30] PBClient Parity error; [31] PBClient Hw
+ * interrupt;
+ */
+#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c
+#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c
+#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c
+/* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped
+ * as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
+ * General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
+ * [7] General attn9; [8] General attn10; [9] General attn11; [10] General
+ * attn12; [11] General attn13; [12] General attn14; [13] General attn15;
+ * [14] General attn16; [15] General attn17; [16] General attn18; [17]
+ * General attn19; [18] General attn20; [19] General attn21; [20] Main power
+ * interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
+ * Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
+ * Latched timeout attention; [27] GRC Latched reserved access attention;
+ * [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
+ * Latched ump_tx_parity; [31] MCP Latched scpad_parity;
+ */
+#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078
+/* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped
+ * as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
+ * General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
+ * [7] General attn9; [8] General attn10; [9] General attn11; [10] General
+ * attn12; [11] General attn13; [12] General attn14; [13] General attn15;
+ * [14] General attn16; [15] General attn17; [16] General attn18; [17]
+ * General attn19; [18] General attn20; [19] General attn21; [20] Main power
+ * interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
+ * Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
+ * Latched timeout attention; [27] GRC Latched reserved access attention;
+ * [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
+ * Latched ump_tx_parity; [31] MCP Latched scpad_parity;
+ */
+#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118
+/* [RW 32] fourth 32b for enabling the output for close the gate nig. Mapped
+ * as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
+ * General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
+ * [7] General attn9; [8] General attn10; [9] General attn11; [10] General
+ * attn12; [11] General attn13; [12] General attn14; [13] General attn15;
+ * [14] General attn16; [15] General attn17; [16] General attn18; [17]
+ * General attn19; [18] General attn20; [19] General attn21; [20] Main power
+ * interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
+ * Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
+ * Latched timeout attention; [27] GRC Latched reserved access attention;
+ * [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
+ * Latched ump_tx_parity; [31] MCP Latched scpad_parity;
+ */
+#define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8
+#define MISC_REG_AEU_ENABLE4_NIG_1 0xa198
+/* [RW 32] fourth 32b for enabling the output for close the gate pxp. Mapped
+ * as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
+ * General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
+ * [7] General attn9; [8] General attn10; [9] General attn11; [10] General
+ * attn12; [11] General attn13; [12] General attn14; [13] General attn15;
+ * [14] General attn16; [15] General attn17; [16] General attn18; [17]
+ * General attn19; [18] General attn20; [19] General attn21; [20] Main power
+ * interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
+ * Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
+ * Latched timeout attention; [27] GRC Latched reserved access attention;
+ * [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
+ * Latched ump_tx_parity; [31] MCP Latched scpad_parity;
+ */
+#define MISC_REG_AEU_ENABLE4_PXP_0 0xa108
+#define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8
+/* [RW 32] fifth 32b for enabling the output for function 0 output0. Mapped
+ * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
+ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
+ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
+ * parity; [31-10] Reserved;
+ */
+#define MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0 0xa688
+/* [RW 32] Fifth 32b for enabling the output for function 1 output0. Mapped
+ * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
+ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
+ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
+ * parity; [31-10] Reserved;
+ */
+#define MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 0xa6b0
+/* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
+ * 128 bit vector
+ */
+#define MISC_REG_AEU_GENERAL_ATTN_0 0xa000
+#define MISC_REG_AEU_GENERAL_ATTN_1 0xa004
+#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
+#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
+#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
+#define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
+#define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c
+#define MISC_REG_AEU_GENERAL_ATTN_4 0xa010
+#define MISC_REG_AEU_GENERAL_ATTN_5 0xa014
+#define MISC_REG_AEU_GENERAL_ATTN_6 0xa018
+#define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c
+#define MISC_REG_AEU_GENERAL_ATTN_8 0xa020
+#define MISC_REG_AEU_GENERAL_ATTN_9 0xa024
+#define MISC_REG_AEU_GENERAL_MASK 0xa61c
+/* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0;
+ * [9:8] = reserved. 0 = mask; 1 = unmask
+ */
+#define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060
+#define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064
+/* [RW 1] If set a system kill occurred. Reset on POR reset. */
+#define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610
+/* [RW 32] Represent the status of the input vector to the AEU when a system
+ * kill occurred. The register is reset in por reset. Mapped as follows: [0]
+ * NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
+ * mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
+ * [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
+ * PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
+ * function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
+ * Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
+ * mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
+ * BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
+ * Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
+ * interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
+ * Parity error; [29] TSEMI Hw interrupt; [30] PBClient Parity error; [31]
+ * PBClient Hw interrupt. Reset on POR reset.
+ */
+#define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600
+#define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604
+#define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608
+#define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c
+/* [R 32] This field indicates the type of the device. '0' - 2 Ports; '1' -
+ * 1 Port. Global register.
+ */
+#define MISC_REG_BOND_ID 0xa400
+/* [R 16] These bits indicate the part number for the chip. Global register. */
+#define MISC_REG_CHIP_NUM 0xa408
+/* [R 4] These bits indicate the base revision of the chip. This value
+ * starts at 0x0 for the A0 tape-out and increments by one for each
+ * all-layer tape-out. Global register.
+ */
+#define MISC_REG_CHIP_REV 0xa40c
+/* [R 14] otp_misc_do[100:0] spare bits collection: 13:11-
+ * otp_misc_do[100:98]; 10:7 - otp_misc_do[87:84]; 6:3 - otp_misc_do[75:72];
+ * 2:1 - otp_misc_do[51:50]; 0 - otp_misc_do[1].
+ */
+#define MISC_REG_CHIP_TYPE 0xac60
+#define MISC_REG_CHIP_TYPE_57811_MASK (1 << 1)
+#define MISC_REG_CPMU_LP_DR_ENABLE 0xa858
+/* [RW 1] FW EEE LPI Enable. When 1 indicates that EEE LPI mode is enabled
+ * by FW. When 0 indicates that the EEE LPI mode is disabled by FW. Clk
+ * 25MHz. Reset on hard reset.
+ */
+#define MISC_REG_CPMU_LP_FW_ENABLE_P0 0xa84c
+/* [RW 32] EEE LPI Idle Threshold. The threshold value for the idle EEE LPI
+ * counter. Timer tick is 1 us. Clock 25MHz. Reset on hard reset.
+ */
+#define MISC_REG_CPMU_LP_IDLE_THR_P0 0xa8a0
+/* [RW 18] LPI entry events mask. [0] - Vmain SM Mask. When 1 indicates that
+ * the Vmain SM end state is disabled. When 0 indicates that the Vmain SM
+ * end state is enabled. [1] - FW Queues Empty Mask. When 1 indicates that
+ * the FW command that all Queues are empty is disabled. When 0 indicates
+ * that the FW command that all Queues are empty is enabled. [2] - FW Early
+ * Exit Mask / Reserved (Entry mask). When 1 indicates that the FW Early
+ * Exit command is disabled. When 0 indicates that the FW Early Exit command
+ * is enabled. This bit applicable only in the EXIT Events Mask registers.
+ * [3] - PBF Request Mask. When 1 indicates that the PBF Request indication
+ * is disabled. When 0 indicates that the PBF Request indication is enabled.
+ * [4] - Tx Request Mask. When =1 indicates that the Tx other Than PBF
+ * Request indication is disabled. When 0 indicates that the Tx Other Than
+ * PBF Request indication is enabled. [5] - Rx EEE LPI Status Mask. When 1
+ * indicates that the RX EEE LPI Status indication is disabled. When 0
+ * indicates that the RX EEE LPI Status indication is enabled. In the EXIT
+ * Events Masks registers; this bit masks the falling edge detect of the LPI
+ * Status (Rx LPI is on - off). [6] - Tx Pause Mask. When 1 indicates that
+ * the Tx Pause indication is disabled. When 0 indicates that the Tx Pause
+ * indication is enabled. [7] - BRB1 Empty Mask. When 1 indicates that the
+ * BRB1 EMPTY indication is disabled. When 0 indicates that the BRB1 EMPTY
+ * indication is enabled. [8] - QM Idle Mask. When 1 indicates that the QM
+ * IDLE indication is disabled. When 0 indicates that the QM IDLE indication
+ * is enabled. (One bit for both VOQ0 and VOQ1). [9] - QM LB Idle Mask. When
+ * 1 indicates that the QM IDLE indication for LOOPBACK is disabled. When 0
+ * indicates that the QM IDLE indication for LOOPBACK is enabled. [10] - L1
+ * Status Mask. When 1 indicates that the L1 Status indication from the PCIE
+ * CORE is disabled. When 0 indicates that the RX EEE LPI Status indication
+ * from the PCIE CORE is enabled. In the EXIT Events Masks registers; this
+ * bit masks the falling edge detect of the L1 status (L1 is on - off). [11]
+ * - P0 E0 EEE EEE LPI REQ Mask. When =1 indicates that the P0 E0 EEE EEE
+ * LPI REQ indication is disabled. When =0 indicates that the P0 E0 EEE LPI
+ * REQ indication is enabled. [12] - P1 E0 EEE LPI REQ Mask. When =1
+ * indicates that the P0 EEE LPI REQ indication is disabled. When =0
+ * indicates that the P0 EEE LPI REQ indication is enabled. [13] - P0 E1 EEE
+ * LPI REQ Mask. When =1 indicates that the P0 EEE LPI REQ indication is
+ * disabled. When =0 indicates that the P0 EEE LPI REQ indication is
+ * enabled. [14] - P1 E1 EEE LPI REQ Mask. When =1 indicates that the P0 EEE
+ * LPI REQ indication is disabled. When =0 indicates that the P0 EEE LPI REQ
+ * indication is enabled. [15] - L1 REQ Mask. When =1 indicates that the L1
+ * REQ indication is disabled. When =0 indicates that the L1 indication is
+ * enabled. [16] - Rx EEE LPI Status Edge Detect Mask. When =1 indicates
+ * that the RX EEE LPI Status Falling Edge Detect indication is disabled (Rx
+ * EEE LPI is on - off). When =0 indicates that the RX EEE LPI Status
+ * Falling Edge Detec indication is enabled (Rx EEE LPI is on - off). This
+ * bit is applicable only in the EXIT Events Masks registers. [17] - L1
+ * Status Edge Detect Mask. When =1 indicates that the L1 Status Falling
+ * Edge Detect indication from the PCIE CORE is disabled (L1 is on - off).
+ * When =0 indicates that the L1 Status Falling Edge Detect indication from
+ * the PCIE CORE is enabled (L1 is on - off). This bit is applicable only in
+ * the EXIT Events Masks registers. Clock 25MHz. Reset on hard reset.
+ */
+#define MISC_REG_CPMU_LP_MASK_ENT_P0 0xa880
+/* [RW 18] EEE LPI exit events mask. [0] - Vmain SM Mask. When 1 indicates
+ * that the Vmain SM end state is disabled. When 0 indicates that the Vmain
+ * SM end state is enabled. [1] - FW Queues Empty Mask. When 1 indicates
+ * that the FW command that all Queues are empty is disabled. When 0
+ * indicates that the FW command that all Queues are empty is enabled. [2] -
+ * FW Early Exit Mask / Reserved (Entry mask). When 1 indicates that the FW
+ * Early Exit command is disabled. When 0 indicates that the FW Early Exit
+ * command is enabled. This bit applicable only in the EXIT Events Mask
+ * registers. [3] - PBF Request Mask. When 1 indicates that the PBF Request
+ * indication is disabled. When 0 indicates that the PBF Request indication
+ * is enabled. [4] - Tx Request Mask. When =1 indicates that the Tx other
+ * Than PBF Request indication is disabled. When 0 indicates that the Tx
+ * Other Than PBF Request indication is enabled. [5] - Rx EEE LPI Status
+ * Mask. When 1 indicates that the RX EEE LPI Status indication is disabled.
+ * When 0 indicates that the RX LPI Status indication is enabled. In the
+ * EXIT Events Masks registers; this bit masks the falling edge detect of
+ * the EEE LPI Status (Rx EEE LPI is on - off). [6] - Tx Pause Mask. When 1
+ * indicates that the Tx Pause indication is disabled. When 0 indicates that
+ * the Tx Pause indication is enabled. [7] - BRB1 Empty Mask. When 1
+ * indicates that the BRB1 EMPTY indication is disabled. When 0 indicates
+ * that the BRB1 EMPTY indication is enabled. [8] - QM Idle Mask. When 1
+ * indicates that the QM IDLE indication is disabled. When 0 indicates that
+ * the QM IDLE indication is enabled. (One bit for both VOQ0 and VOQ1). [9]
+ * - QM LB Idle Mask. When 1 indicates that the QM IDLE indication for
+ * LOOPBACK is disabled. When 0 indicates that the QM IDLE indication for
+ * LOOPBACK is enabled. [10] - L1 Status Mask. When 1 indicates that the L1
+ * Status indication from the PCIE CORE is disabled. When 0 indicates that
+ * the RX EEE LPI Status indication from the PCIE CORE is enabled. In the
+ * EXIT Events Masks registers; this bit masks the falling edge detect of
+ * the L1 status (L1 is on - off). [11] - P0 E0 EEE EEE LPI REQ Mask. When
+ * =1 indicates that the P0 E0 EEE EEE LPI REQ indication is disabled. When
+ * =0 indicates that the P0 E0 EEE LPI REQ indication is enabled. [12] - P1
+ * E0 EEE LPI REQ Mask. When =1 indicates that the P0 EEE LPI REQ indication
+ * is disabled. When =0 indicates that the P0 EEE LPI REQ indication is
+ * enabled. [13] - P0 E1 EEE LPI REQ Mask. When =1 indicates that the P0 EEE
+ * LPI REQ indication is disabled. When =0 indicates that the P0 EEE LPI REQ
+ * indication is enabled. [14] - P1 E1 EEE LPI REQ Mask. When =1 indicates
+ * that the P0 EEE LPI REQ indication is disabled. When =0 indicates that
+ * the P0 EEE LPI REQ indication is enabled. [15] - L1 REQ Mask. When =1
+ * indicates that the L1 REQ indication is disabled. When =0 indicates that
+ * the L1 indication is enabled. [16] - Rx EEE LPI Status Edge Detect Mask.
+ * When =1 indicates that the RX EEE LPI Status Falling Edge Detect
+ * indication is disabled (Rx EEE LPI is on - off). When =0 indicates that
+ * the RX EEE LPI Status Falling Edge Detec indication is enabled (Rx EEE
+ * LPI is on - off). This bit is applicable only in the EXIT Events Masks
+ * registers. [17] - L1 Status Edge Detect Mask. When =1 indicates that the
+ * L1 Status Falling Edge Detect indication from the PCIE CORE is disabled
+ * (L1 is on - off). When =0 indicates that the L1 Status Falling Edge
+ * Detect indication from the PCIE CORE is enabled (L1 is on - off). This
+ * bit is applicable only in the EXIT Events Masks registers.Clock 25MHz.
+ * Reset on hard reset.
+ */
+#define MISC_REG_CPMU_LP_MASK_EXT_P0 0xa888
+/* [RW 16] EEE LPI Entry Events Counter. A statistic counter with the number
+ * of counts that the SM entered the EEE LPI state. Clock 25MHz. Read only
+ * register. Reset on hard reset.
+ */
+#define MISC_REG_CPMU_LP_SM_ENT_CNT_P0 0xa8b8
+/* [RW 16] EEE LPI Entry Events Counter. A statistic counter with the number
+ * of counts that the SM entered the EEE LPI state. Clock 25MHz. Read only
+ * register. Reset on hard reset.
+ */
+#define MISC_REG_CPMU_LP_SM_ENT_CNT_P1 0xa8bc
+/* [RW 32] The following driver registers(1...16) represent 16 drivers and
+ * 32 clients. Each client can be controlled by one driver only. One in each
+ * bit represent that this driver control the appropriate client (Ex: bit 5
+ * is set means this driver control client number 5). addr1 = set; addr0 =
+ * clear; read from both addresses will give the same result = status. write
+ * to address 1 will set a request to control all the clients that their
+ * appropriate bit (in the write command) is set. if the client is free (the
+ * appropriate bit in all the other drivers is clear) one will be written to
+ * that driver register; if the client isn't free the bit will remain zero.
+ * if the appropriate bit is set (the driver request to gain control on a
+ * client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+ * interrupt will be asserted). write to address 0 will set a request to
+ * free all the clients that their appropriate bit (in the write command) is
+ * set. if the appropriate bit is clear (the driver request to free a client
+ * it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+ * be asserted).
+ */
+#define MISC_REG_DRIVER_CONTROL_1 0xa510
+#define MISC_REG_DRIVER_CONTROL_7 0xa3c8
+/* [R 1] Status of four port mode path swap input pin. */
+#define MISC_REG_FOUR_PORT_PATH_SWAP 0xa75c
+/* [RW 2] 4 port path swap overwrite.[0] - Overwrite control; if it is 0 -
+ * the path_swap output is equal to 4 port mode path swap input pin; if it
+ * is 1 - the path_swap output is equal to bit[1] of this register; [1] -
+ * Overwrite value. If bit[0] of this register is 1 this is the value that
+ * receives the path_swap output. Reset on Hard reset.
+ */
+#define MISC_REG_FOUR_PORT_PATH_SWAP_OVWR 0xa738
+/* [R 1] Status of 4 port mode port swap input pin. */
+#define MISC_REG_FOUR_PORT_PORT_SWAP 0xa754
+/* [RW 2] 4 port port swap overwrite.[0] - Overwrite control; if it is 0 -
+ * the port_swap output is equal to 4 port mode port swap input pin; if it
+ * is 1 - the port_swap output is equal to bit[1] of this register; [1] -
+ * Overwrite value. If bit[0] of this register is 1 this is the value that
+ * receives the port_swap output. Reset on Hard reset.
+ */
+#define MISC_REG_FOUR_PORT_PORT_SWAP_OVWR 0xa734
+/* [RW 32] Debug only: spare RW register reset by core reset. Global
+ * register. Reset on core reset.
+ */
+#define MISC_REG_GENERIC_CR_0 0xa460
+#define MISC_REG_GENERIC_CR_1 0xa464
+/* [RW 32] Debug only: spare RW register reset by por reset. Global
+ * register. Reset on POR reset.
+ */
+#define MISC_REG_GENERIC_POR_1 0xa474
+/* [RW 32] Bit[0]: EPIO MODE SEL: Setting this bit to 1 will allow SW/FW to
+ * use all of the 32 Extended GPIO pins. Without setting this bit; an EPIO
+ * can not be configured as an output. Each output has its output enable in
+ * the MCP register space; but this bit needs to be set to make use of that.
+ * Bit[3:1] spare. Bit[4]: WCVTMON_PWRDN: Powerdown for Warpcore VTMON. When
+ * set to 1 - Powerdown. Bit[5]: WCVTMON_RESETB: Reset for Warpcore VTMON.
+ * When set to 0 - vTMON is in reset. Bit[6]: setting this bit will change
+ * the i/o to an output and will drive the TimeSync output. Bit[31:7]:
+ * spare. Global register. Reset by hard reset.
+ */
+#define MISC_REG_GEN_PURP_HWG 0xa9a0
+/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
+ * these bits is written as a '1'; the corresponding GPIO bit will turn off
+ * it's drivers and become an input. This is the reset state of all GPIO
+ * pins. The read value of these bits will be a '1' if that last command
+ * (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
+ * [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
+ * as a '1'; the corresponding GPIO bit will drive low. The read value of
+ * these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
+ * this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
+ * SET When any of these bits is written as a '1'; the corresponding GPIO
+ * bit will drive high (if it has that capability). The read value of these
+ * bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
+ * bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
+ * RO; These bits indicate the read value of each of the eight GPIO pins.
+ * This is the result value of the pin; not the drive value. Writing these
+ * bits will have not effect. Global register.
+ */
+#define MISC_REG_GPIO 0xa490
+/* [RW 8] These bits enable the GPIO_INTs to signals event to the
+ * IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2]
+ * p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2;
+ * [7] p1_gpio_3; Global register.
+ */
+#define MISC_REG_GPIO_EVENT_EN 0xa2bc
+/* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing a
+ * '1' to these bit clears the corresponding bit in the #OLD_VALUE register.
+ * This will acknowledge an interrupt on the falling edge of corresponding
+ * GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0;
+ * Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE
+ * register. This will acknowledge an interrupt on the rising edge of
+ * corresponding GPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1;
+ * OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input
+ * value. When the ~INT_STATE bit is set; this bit indicates the OLD value
+ * of the pin such that if ~INT_STATE is set and this bit is '0'; then the
+ * interrupt is due to a low to high edge. If ~INT_STATE is set and this bit
+ * is '1'; then the interrupt is due to a high to low edge (reset value 0).
+ * [7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the
+ * current GPIO interrupt state for each GPIO pin. This bit is cleared when
+ * the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is
+ * set when the GPIO input does not match the current value in #OLD_VALUE
+ * (reset value 0). Global register.
+ */
+#define MISC_REG_GPIO_INT 0xa494
+/* [R 28] this field hold the last information that caused reserved
+ * attention. bits [19:0] - address; [22:20] function; [23] reserved;
+ * [27:24] the master that caused the attention - according to the following
+ * encoding:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
+ * dbu; 8 = dmae
+ */
+#define MISC_REG_GRC_RSV_ATTN 0xa3c0
+/* [R 28] this field hold the last information that caused timeout
+ * attention. bits [19:0] - address; [22:20] function; [23] reserved;
+ * [27:24] the master that caused the attention - according to the following
+ * encoding:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
+ * dbu; 8 = dmae
+ */
+#define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4
+/* [R 10] Holds the last FID that caused timeout attention. Need to be used
+ * in conjunction with ~misc_registers_timeout_attn; where 3 bits of
+ * function (3 lsb) are also represented. Bit[2:0] - PFID; bit[3] - VFID
+ * valid; bit[9:4] - VFID. Global register.
+ */
+#define MISC_REG_GRC_TIMEOUT_ATTN_FULL_FID 0xa714
+/* [RW 1] LCPLL power down. Global register. Active High. Reset on POR
+ * reset.
+ */
+#define MISC_REG_LCPLL_E40_PWRDWN 0xaa74
+/* [RW 1] LCPLL VCO reset. Global register. Active Low Reset on POR reset. */
+#define MISC_REG_LCPLL_E40_RESETB_ANA 0xaa78
+/* [RW 1] LCPLL post-divider reset. Global register. Active Low Reset on POR
+ * reset.
+ */
+#define MISC_REG_LCPLL_E40_RESETB_DIG 0xaa7c
+/* [RW 8] Interrupt mask register #0 read/write */
+#define MISC_REG_MISC_INT_MASK 0xa388
+/* [R 8] Interrupt register #0 read */
+#define MISC_REG_MISC_INT_STS 0xa37c
+/* [RC 8] Interrupt register #0 read clear */
+#define MISC_REG_MISC_INT_STS_CLR 0xa380
+/* [RW 1] Parity mask register #0 read/write */
+#define MISC_REG_MISC_PRTY_MASK 0xa398
+/* [R 1] Parity register #0 read */
+#define MISC_REG_MISC_PRTY_STS 0xa38c
+/* [RC 1] Parity register #0 read clear */
+#define MISC_REG_MISC_PRTY_STS_CLR 0xa390
+/* [R 1] If set indicate that the pcie_rst_b was asserted without perst
+ * assertion. Global register.
+ */
+#define MISC_REG_PCIE_HOT_RESET 0xa618
+/* [R 1] Status of 4 port mode enable input pin. */
+#define MISC_REG_PORT4MODE_EN 0xa750
+/* [RW 2] 4 port mode enable overwrite.[0] - Overwrite control; if it is 0 -
+ * the port4mode_en output is equal to 4 port mode input pin; if it is 1 -
+ * the port4mode_en output is equal to bit[1] of this register; [1] -
+ * Overwrite value. If bit[0] of this register is 1 this is the value that
+ * receives the port4mode_en output. Reset on Hard reset.
+ */
+#define MISC_REG_PORT4MODE_EN_OVWR 0xa720
+/* [RW 32] reset reg#1; rite/read one = the specific block is out of reset;
+ * write/read zero = the specific block is in reset; addr 0-wr- the write
+ * value will be written to the register; addr 1-set - one will be written
+ * to all the bits that have the value of one in the data written (bits that
+ * have the value of zero will not be change) ; addr 2-clear - zero will be
+ * written to all the bits that have the value of one in the data written
+ * (bits that have the value of zero will not be change); addr 3-ignore;
+ * read ignore from all addr except addr 00; inside order of the bits is:
+ * [0] rst_brb1; [1] rst_prs; [2] rst_src; [3] rst_tsdm; [4] rst_tsem; [5]
+ * rst_tcm; [6] rst_rbcr; [7] rst_nig; [8] rst_usdm; [9] rst_ucm; [10]
+ * rst_usem; [11] rst_upb; [12] rst_ccm; [13] rst_csem; [14] rst_csdm; [15]
+ * rst_rbcu; [16] rst_pbf; [17] rst_qm; [18] rst_tm; [19] rst_dorq; [20]
+ * rst_xcm; [21] rst_xsdm; [22] rst_xsem; [23] rst_rbct; [24] rst_cdu; [25]
+ * rst_cfc; [26] rst_pxp_hst; [27] rst_pxpv (global register); [28]
+ * rst_rbcp; [29] rst_hc; [30] rst_dmae; [31] rst_semi_rtc;
+ */
+#define MISC_REG_RESET_REG_1 0xa580
+#define MISC_REG_RESET_REG_2 0xa590
+/* [RW 22] 22 bit GRC address where the scratch-pad of the MCP that is
+ * shared with the driver resides
+ */
+#define MISC_REG_SHARED_MEM_ADDR 0xa2b4
+/* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1';
+ * the corresponding SPIO bit will turn off it's drivers and become an
+ * input. This is the reset state of all SPIO pins. The read value of these
+ * bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
+ * bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
+ * is written as a '1'; the corresponding SPIO bit will drive low. The read
+ * value of these bits will be a '1' if that last command (#SET; #CLR; or
+ * #FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
+ * these bits is written as a '1'; the corresponding SPIO bit will drive
+ * high (if it has that capability). The read value of these bits will be a
+ * '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
+ * (reset value 0). [7-0] VALUE RO; These bits indicate the read value of
+ * each of the eight SPIO pins. This is the result value of the pin; not the
+ * drive value. Writing these bits will have not effect. Each 8 bits field
+ * is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
+ * from VAUX. (This is an output pin only; the FLOAT field is not applicable
+ * for this pin); [1] VAUX Disable; when pulsed low; disables supply form
+ * VAUX. (This is an output pin only; FLOAT field is not applicable for this
+ * pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
+ * select VAUX supply. (This is an output pin only; it is not controlled by
+ * the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
+ * field is not applicable for this pin; only the VALUE fields is relevant -
+ * it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6]
+ * Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
+ * device ID select; read by UMP firmware. Global register.
+ */
+#define MISC_REG_SPIO 0xa4fc
+/* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC.
+ * according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
+ * [7:6] reserved. Global register.
+ */
+#define MISC_REG_SPIO_EVENT_EN 0xa2b8
+/* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the
+ * corresponding bit in the #OLD_VALUE register. This will acknowledge an
+ * interrupt on the falling edge of corresponding SPIO input (reset value
+ * 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
+ * in the #OLD_VALUE register. This will acknowledge an interrupt on the
+ * rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
+ * RO; These bits indicate the old value of the SPIO input value. When the
+ * ~INT_STATE bit is set; this bit indicates the OLD value of the pin such
+ * that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
+ * to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
+ * interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
+ * RO; These bits indicate the current SPIO interrupt state for each SPIO
+ * pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
+ * command bit is written. This bit is set when the SPIO input does not
+ * match the current value in #OLD_VALUE (reset value 0). Global register.
+ */
+#define MISC_REG_SPIO_INT 0xa500
+/* [R 1] Status of two port mode path swap input pin. */
+#define MISC_REG_TWO_PORT_PATH_SWAP 0xa758
+/* [RW 2] 2 port swap overwrite.[0] - Overwrite control; if it is 0 - the
+ * path_swap output is equal to 2 port mode path swap input pin; if it is 1
+ * - the path_swap output is equal to bit[1] of this register; [1] -
+ * Overwrite value. If bit[0] of this register is 1 this is the value that
+ * receives the path_swap output. Reset on Hard reset.
+ */
+#define MISC_REG_TWO_PORT_PATH_SWAP_OVWR 0xa72c
+/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
+ * loaded; 0-prepare; -unprepare. Global register. Reset on hard reset.
+ */
+#define MISC_REG_UNPREPARED 0xa424
+/* [RW 5] MDIO PHY Address. The WC uses this address to determine whether or
+ * not it is the recipient of the message on the MDIO interface. The value
+ * is compared to the value on ctrl_md_devad. Drives output
+ * misc_xgxs0_phy_addr. Global register.
+ */
+#define MISC_REG_WC0_CTRL_PHY_ADDR 0xa9cc
+/* [RW 10] reset reg#3; rite/read one = the specific block is out of reset;
+ * write/read zero = the specific block is in reset; addr 0-wr- the write
+ * value will be written to the register; addr 1-set - one will be written
+ * to all the bits that have the value of one in the data written (bits that
+ * have the value of zero will not be change) ; addr 2-clear - zero will be
+ * written to all the bits that have the value of one in the data written
+ * (bits that have the value of zero will not be change); addr 3-ignore;
+ * read ignore from all addr except addr 00. [0]: rstb_hw: Active low reset
+ * which when asserted drives entire WC into the reset state. All flops
+ * which within WC are driven into an initial state; as well as the analog
+ * core. Output clocks txck_out; rxck0_10g; and clk_25 will be driven to 0
+ * upon its assertion. [1]: iddq. Enables iddq testing where the supply
+ * current (Idd) is measured in the quiescent state. [2]: pwrdwn: Active
+ * high control which forces the analog core of the WC into power-down mode;
+ * and forces digital logic of the WC into reset. Output clock (refclk)
+ * remains active. [3]: pwrdwn_sd: Power down signal detect. [4]:
+ * txd10g_fifo_rstb: Transmit 10Gbps FIFO reset; active low. Used to reset
+ * the transmit FIFO used in xlgmii operation. [8:5]: txd1g_fifo_rstb:
+ * Transmit 1Gbps FIFO reset; active low. Used to reset the per-lane
+ * transmit FIFOs used in the mii/gmii operation. [9]:
+ * txd10g_fifo_rstb_dxgxs1: Transmit 10Gbps DXGXS FIFO reset; active low.
+ * Used to reset the transmit FIFO used in the DXGXS logic in xlgmii
+ * operation. Global register.
+ */
+#define MISC_REG_WC0_RESET 0xac30
+/* [RW 2] XMAC Core port mode. Indicates the number of ports on the system
+ * side. This should be less than or equal to phy_port_mode; if some of the
+ * ports are not used. This enables reduction of frequency on the core side.
+ * This is a strap input for the XMAC_MP core. 00 - Single Port Mode; 01 -
+ * Dual Port Mode; 10 - Tri Port Mode; 11 - Quad Port Mode. This is a strap
+ * input for the XMAC_MP core; and should be changed only while reset is
+ * held low. Reset on Hard reset.
+ */
+#define MISC_REG_XMAC_CORE_PORT_MODE 0xa964
+/* [RW 2] XMAC PHY port mode. Indicates the number of ports on the Warp
+ * Core. This is a strap input for the XMAC_MP core. 00 - Single Port Mode;
+ * 01 - Dual Port Mode; 1x - Quad Port Mode; This is a strap input for the
+ * XMAC_MP core; and should be changed only while reset is held low. Reset
+ * on Hard reset.
+ */
+#define MISC_REG_XMAC_PHY_PORT_MODE 0xa960
+/* [RW 1] Interrupt mask register #0 read/write */
+#define MSTAT_REG_MSTAT_INT_MASK 0x7fc
+/* [R 1] Interrupt register #0 read */
+#define MSTAT_REG_MSTAT_INT_STS 0x7f0
+/* [RC 1] Interrupt register #0 read clear */
+#define MSTAT_REG_MSTAT_INT_STS_CLR 0x7f4
+/* [RW 32] 1 [47] Packet Size = 64 Write to this register write bits 31:0.
+ * Reads from this register will clear bits 31:0.
+ */
+#define MSTAT_REG_RX_STAT_GR64_LO 0x200
+/* [RW 32] 1 [00] Tx Good Packet Count Write to this register write bits
+ * 31:0. Reads from this register will clear bits 31:0.
+ */
+#define MSTAT_REG_TX_STAT_GTXPOK_LO 0
+#define NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN (0x1 << 0)
+#define NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN (0x1 << 0)
+#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1 << 0)
+#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1 << 9)
+#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1 << 15)
+#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS (0xf << 18)
+/* [R 1] Input enable for RX_BMAC0 IF */
+#define NIG_REG_BMAC0_IN_EN 0x100ac
+/* [R 1] output enable for TX_BMAC0 IF */
+#define NIG_REG_BMAC0_OUT_EN 0x100e0
+/* [R 1] output enable for TX BMAC pause port 0 IF */
+#define NIG_REG_BMAC0_PAUSE_OUT_EN 0x10110
+/* [R 1] output enable for RX_BMAC0_REGS IF */
+#define NIG_REG_BMAC0_REGS_OUT_EN 0x100e8
+/* [RW 1] output enable for RX BRB1 port0 IF */
+#define NIG_REG_BRB0_OUT_EN 0x100f8
+/* [RW 1] Input enable for TX BRB1 pause port 0 IF */
+#define NIG_REG_BRB0_PAUSE_IN_EN 0x100c4
+/* [RW 1] Input enable for TX BRB1 pause port 1 IF */
+#define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8
+/* [WB_W 90] Debug packet to LP from RBC; Data spelling:[63:0] data; 64]
+ * error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush;
+ * 72:73]-vnic_num; 89:74]-sideband_info
+ */
+#define NIG_REG_DEBUG_PACKET_LB 0x10800
+/* [R 1] FIFO empty in DEBUG_FIFO in NIG_TX_DBG */
+#define NIG_REG_EGRESS_DEBUG_FIFO_EMPTY 0x10418
+/* [R 1] FIFO empty in DELAY_PBF_FIFO in NIG_RX_PORT0 */
+#define NIG_REG_EGRESS_DELAY0_EMPTY 0x10420
+/* [R 1] FIFO empty in DELAY_PBF_FIFO in NIG_RX_PORT1 */
+#define NIG_REG_EGRESS_DELAY1_EMPTY 0x10428
+/* [R 1] PBF FIFO empty flag. */
+#define NIG_REG_EGRESS_DELAY2_EMPTY 0x1862c
+/* [R 1] PBF FIFO empty flag. */
+#define NIG_REG_EGRESS_DELAY3_EMPTY 0x18630
+/* [R 1] PBF FIFO empty flag. */
+#define NIG_REG_EGRESS_DELAY4_EMPTY 0x18634
+/* [R 1] PBF FIFO empty flag. */
+#define NIG_REG_EGRESS_DELAY5_EMPTY 0x18638
+/* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all
+ * packets from PBFare not forwarded to the MAC and just deleted from FIFO.
+ * First packet may be deleted from the middle. And last packet will be
+ * always deleted till the end.
+ */
+#define NIG_REG_EGRESS_DRAIN0_MODE 0x10060
+/* [R 1] Output enable to EMAC0 */
+#define NIG_REG_EGRESS_EMAC0_OUT_EN 0x10120
+/* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs
+ * to emac for port0; other way to bmac for port0
+ */
+#define NIG_REG_EGRESS_EMAC0_PORT 0x10058
+/* [R 1] FIFO empty in MNG_FIFO in NIG_TX_PORT0 */
+#define NIG_REG_EGRESS_MNG0_FIFO_EMPTY 0x10460
+/* [R 1] FIFO empty in MNG_FIFO in NIG_TX_PORT1 */
+#define NIG_REG_EGRESS_MNG1_FIFO_EMPTY 0x10474
+/* [RW 1] Input enable for TX UMP management packet port0 IF */
+#define NIG_REG_EGRESS_UMP0_IN_EN 0x100d4
+/* [R 1] Input enable for RX_EMAC0 IF */
+#define NIG_REG_EMAC0_IN_EN 0x100a4
+/* [R 1] output enable for TX EMAC pause port 0 IF */
+#define NIG_REG_EMAC0_PAUSE_OUT_EN 0x10118
+/* [R 1] status from emac0. This bit is set when MDINT from either the
+ * EXT_MDINT pin or from the Copper PHY is driven low. This condition must
+ * be cleared in the attached PHY device that is driving the MINT pin.
+ */
+#define NIG_REG_EMAC0_STATUS_MISC_MI_INT 0x10494
+/* [R 48] This address space contains BMAC0 registers. The BMAC registers
+ * are described in appendix A. In order to access the BMAC0 registers; the
+ * base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be
+ * added to each BMAC register offset
+ */
+#define NIG_REG_INGRESS_BMAC0_MEM 0x10c00
+/* [R 48] This address space contains BMAC1 registers. The BMAC registers
+ * are described in appendix A. In order to access the BMAC0 registers; the
+ * base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be
+ * added to each BMAC register offset
+ */
+#define NIG_REG_INGRESS_BMAC1_MEM 0x11000
+/* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */
+#define NIG_REG_INGRESS_EOP_LB_EMPTY 0x104e0
+/* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data
+ * packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16]
+ */
+#define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4
+/* [R 1] FIFO empty in EOP descriptor FIFO of port 0 in NIG_RX_EOP */
+#define NIG_REG_INGRESS_EOP_PORT0_EMPTY 0x104ec
+/* [R 1] FIFO empty in EOP descriptor FIFO of port 1 in NIG_RX_EOP */
+#define NIG_REG_INGRESS_EOP_PORT1_EMPTY 0x104f8
+/* [R 1] FIFO empty in PBF_DELAY_lb_FIFO in NIG_RX_lb */
+#define NIG_REG_INGRESS_LB_PBF_DELAY_EMPTY 0x10508
+/* [R 1] FIFO empty in dscr_fifo in NIG_RX_RMP block */
+#define NIG_REG_INGRESS_RMP0_DSCR_EMPTY 0x10530
+/* [R 1] FIFO empty in dscr_fifo in NIG_RX_RMP block */
+#define NIG_REG_INGRESS_RMP1_DSCR_EMPTY 0x10538
+/* [RW 27] 0 - must be active for Everest A0; 1- for Everest B0 when latch
+ * logic for interrupts must be used. Enable per bit of interrupt of
+ * ~latch_status.latch_status
+ */
+#define NIG_REG_LATCH_BC_0 0x16210
+/* [RW 27] Latch for each interrupt from Unicore.b[0]
+ * status_emac0_misc_mi_int; b[1] status_emac0_misc_mi_complete;
+ * b[2]status_emac0_misc_cfg_change; b[3]status_emac0_misc_link_status;
+ * b[4]status_emac0_misc_link_change; b[5]status_emac0_misc_attn;
+ * b[6]status_serdes0_mac_crs; b[7]status_serdes0_autoneg_complete;
+ * b[8]status_serdes0_fiber_rxact; b[9]status_serdes0_link_status;
+ * b[10]status_serdes0_mr_page_rx; b[11]status_serdes0_cl73_an_complete;
+ * b[12]status_serdes0_cl73_mr_page_rx; b[13]status_serdes0_rx_sigdet;
+ * b[14]status_xgxs0_remotemdioreq; b[15]status_xgxs0_link10g;
+ * b[16]status_xgxs0_autoneg_complete; b[17]status_xgxs0_fiber_rxact;
+ * b[21:18]status_xgxs0_link_status; b[22]status_xgxs0_mr_page_rx;
+ * b[23]status_xgxs0_cl73_an_complete; b[24]status_xgxs0_cl73_mr_page_rx;
+ * b[25]status_xgxs0_rx_sigdet; b[26]status_xgxs0_mac_crs
+ */
+#define NIG_REG_LATCH_STATUS_0 0x18000
+/* [RW 1] led 10g for port 0 */
+#define NIG_REG_LED_10G_P0 0x10320
+/* [RW 1] Port0: This bit is set to enable the use of the
+ * ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field
+ * defined below. If this bit is cleared; then the blink rate will be about
+ * 8Hz.
+ */
+#define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 0x10318
+/* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for
+ * Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field
+ * is reset to 0x080; giving a default blink period of approximately 8Hz.
+ */
+#define NIG_REG_LED_CONTROL_BLINK_RATE_P0 0x10310
+/* [RW 1] Port0: If set along with the
+ * s_led_control_override_traffic_p0.led_control_override_traffic_p0
+ * bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED
+ * bit; the Traffic LED will blink with the blink rate specified in
+ * ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
+ * ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
+ * fields.
+ */
+#define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 0x10308
+/* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The
+ * Traffic LED will then be controlled via bit ~nig_registers_
+ * led_control_traffic_p0.led_control_traffic_p0 and bit
+ * ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0
+ */
+#define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 0x102f8
+/* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit;
+ * turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also
+ * set; the LED will blink with blink rate specified in
+ * ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
+ * ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
+ * fields.
+ */
+#define NIG_REG_LED_CONTROL_TRAFFIC_P0 0x10300
+/* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3;
+ * 9-11PHY7; 12 MAC4; 13-15 PHY10;
+ */
+#define NIG_REG_LED_MODE_P0 0x102f0
+/* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1-
+ * tsdm enable; b2- usdm enable
+ */
+#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 0x16070
+#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 0x16074
+/* [RW 1] SAFC enable for port0. This register may get 1 only when
+ * ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same
+ * port
+ */
+#define NIG_REG_LLFC_ENABLE_0 0x16208
+#define NIG_REG_LLFC_ENABLE_1 0x1620c
+/* [RW 16] classes are high-priority for port0 */
+#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058
+#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 0x1605c
+/* [RW 16] classes are low-priority for port0 */
+#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060
+#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 0x16064
+/* [RW 1] Output enable of message to LLFC BMAC IF for port0 */
+#define NIG_REG_LLFC_OUT_EN_0 0x160c8
+#define NIG_REG_LLFC_OUT_EN_1 0x160cc
+#define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c
+#define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154
+#define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244
+#define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048
+/* [RW 1] send to BRB1 if no match on any of RMP rules. */
+#define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c
+/* [RW 2] Determine the classification participants. 0: no classification.1:
+ * classification upon VLAN id. 2: classification upon MAC address. 3:
+ * classification upon both VLAN id & MAC addr.
+ */
+#define NIG_REG_LLH0_CLS_TYPE 0x16080
+#define NIG_REG_LLH0_DEST_IP_0_1 0x101dc
+#define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0
+/* [RW 16] destination TCP address 1. The LLH will look for this address in
+ * all incoming packets.
+ */
+#define NIG_REG_LLH0_DEST_TCP_0 0x10220
+/* [RW 16] destination UDP address 1 The LLH will look for this address in
+ * all incoming packets.
+ */
+#define NIG_REG_LLH0_DEST_UDP_0 0x10214
+/* [R 1] FIFO empty in LLH port0 */
+#define NIG_REG_LLH0_FIFO_EMPTY 0x10548
+#define NIG_REG_LLH0_FUNC_EN 0x160fc
+#define NIG_REG_LLH0_FUNC_MEM 0x16180
+#define NIG_REG_LLH0_FUNC_MEM_ENABLE 0x16140
+#define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100
+/* [RW 1] Determine the IP version to look for in
+ * ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4
+ */
+#define NIG_REG_LLH0_IPV4_IPV6_0 0x10208
+/* [RW 1] t bit for llh0 */
+#define NIG_REG_LLH0_T_BIT 0x10074
+/* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */
+#define NIG_REG_LLH0_VLAN_ID_0 0x1022c
+#define NIG_REG_LLH0_XCM_MASK 0x10130
+#define NIG_REG_LLH1_BRB1_DRV_MASK_MF 0x1604c
+/* [RW 1] send to BRB1 if no match on any of RMP rules. */
+#define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc
+/* [RW 2] Determine the classification participants. 0: no classification.1:
+ * classification upon VLAN id. 2: classification upon MAC address. 3:
+ * classification upon both VLAN id & MAC addr.
+ */
+#define NIG_REG_LLH1_CLS_TYPE 0x16084
+/* [R 1] FIFO empty in LLH port1 */
+#define NIG_REG_LLH1_FIFO_EMPTY 0x10558
+#define NIG_REG_LLH1_FUNC_EN 0x16104
+#define NIG_REG_LLH1_FUNC_MEM 0x161c0
+#define NIG_REG_LLH1_FUNC_MEM_ENABLE 0x16160
+#define NIG_REG_LLH1_FUNC_MEM_SIZE 16
+/* [RW 1] When this bit is set; the LLH will classify the packet before
+ * sending it to the BRB or calculating WoL on it. This bit controls port 1
+ * only. The legacy llh_multi_function_mode bit controls port 0.
+ */
+#define NIG_REG_LLH1_MF_MODE 0x18614
+#define NIG_REG_LLH1_XCM_MASK 0x10134
+/* [RW 1] When this bit is set; the LLH will expect all packets to be with
+ * outer VLAN. This is not applicable to E2.
+ */
+#define NIG_REG_LLH_E1HOV_MODE 0x160d8
+/* [RW 16] Outer VLAN type identifier for multi-function mode. In non
+ * multi-function mode; it will hold the inner VLAN type. Typically 0x8100.
+ */
+#define NIG_REG_LLH_E1HOV_TYPE_1 0x16028
+/* [RW 1] When this bit is set; the LLH will classify the packet before
+ * sending it to the BRB or calculating WoL on it. This bit is applicable to
+ * both ports 0 and 1 for E2. This bit only controls port 0 in E3.
+ */
+#define NIG_REG_LLH_MF_MODE 0x16024
+#define NIG_REG_MASK_INTERRUPT_PORT0 0x10330
+#define NIG_REG_MASK_INTERRUPT_PORT1 0x10334
+/* [R 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */
+#define NIG_REG_NIG_EMAC0_EN 0x1003c
+/* [R 1] Output signal from NIG to TX_EMAC0. When set indicates to the EMAC0
+ * to strip the CRC from the ingress packets.
+ */
+#define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044
+/* [RW 32] Interrupt mask register #0 read/write */
+#define NIG_REG_NIG_INT_MASK_0 0x103bc
+#define NIG_REG_NIG_INT_MASK_1 0x103cc
+/* [R 32] Interrupt register #0 read */
+#define NIG_REG_NIG_INT_STS_0 0x103b0
+#define NIG_REG_NIG_INT_STS_1 0x103c0
+/* [RC 32] Interrupt register #0 read clear */
+#define NIG_REG_NIG_INT_STS_CLR_0 0x103b4
+#define NIG_REG_NIG_INT_STS_CLR_1 0x103c4
+/* [R 32] Legacy E1 and E1H location for parity error mask register. */
+#define NIG_REG_NIG_PRTY_MASK 0x103dc
+/* [RW 32] Parity mask register #0 read/write */
+#define NIG_REG_NIG_PRTY_MASK_0 0x183c8
+#define NIG_REG_NIG_PRTY_MASK_1 0x183d8
+/* [R 32] Legacy E1 and E1H location for parity error status register. */
+#define NIG_REG_NIG_PRTY_STS 0x103d0
+/* [R 32] Parity register #0 read */
+#define NIG_REG_NIG_PRTY_STS_0 0x183bc
+#define NIG_REG_NIG_PRTY_STS_1 0x183cc
+/* [R 32] Legacy E1 and E1H location for parity error status clear register. */
+#define NIG_REG_NIG_PRTY_STS_CLR 0x103d4
+/* [RC 32] Parity register #0 read clear */
+#define NIG_REG_NIG_PRTY_STS_CLR_0 0x183c0
+#define NIG_REG_NIG_PRTY_STS_CLR_1 0x183d0
+/* [R 1] Indication that HBUF descriptor FIFO is empty. */
+#define NIG_REG_P0_HBUF_DSCR_EMPTY 0x18318
+/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
+ * Ethernet header.
+ */
+#define NIG_REG_P0_HDRS_AFTER_BASIC 0x18038
+/* [RW 1] HW PFC enable bit. Set this bit to enable the PFC functionality in
+ * the NIG. Other flow control modes such as PAUSE and SAFC/LLFC should be
+ * disabled when this bit is set.
+ */
+#define NIG_REG_P0_HWPFC_ENABLE 0x18078
+#define NIG_REG_P0_LLH_FUNC_MEM2 0x18480
+/* [RW 17] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * the host. Bits [15:0] return the sequence ID of the packet. Bit 16
+ * indicates the validity of the data in the buffer. Writing a 1 to bit 16
+ * will clear the buffer.
+ */
+#define NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID 0x1875c
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * the host. This location returns the lower 32 bits of timestamp value.
+ */
+#define NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB 0x18754
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * the host. This location returns the upper 32 bits of timestamp value.
+ */
+#define NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB 0x18758
+/* [RW 11] Mask register for the various parameters used in determining PTP
+ * packet presence. Set each bit to 1 to mask out the particular parameter.
+ * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
+ * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
+ * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
+ * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
+ * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
+ * MAC DA 2. The reset default is set to mask out all parameters.
+ */
+#define NIG_REG_P0_LLH_PTP_PARAM_MASK 0x187a0
+/* [RW 14] Mask register for the rules used in detecting PTP packets. Set
+ * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
+ * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
+ * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
+ * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
+ * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
+ * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
+ * default is to mask out all of the rules. Note that rules 0-3 are for IPv4
+ * packets only and require that the packet is IPv4 for the rules to match.
+ * Note that rules 4-7 are for IPv6 packets only and require that the packet
+ * is IPv6 for the rules to match.
+ */
+#define NIG_REG_P0_LLH_PTP_RULE_MASK 0x187a4
+/* [RW 1] Set to 1 to enable PTP packets to be forwarded to the host. */
+#define NIG_REG_P0_LLH_PTP_TO_HOST 0x187ac
+/* [RW 1] Input enable for RX MAC interface. */
+#define NIG_REG_P0_MAC_IN_EN 0x185ac
+/* [RW 1] Output enable for TX MAC interface */
+#define NIG_REG_P0_MAC_OUT_EN 0x185b0
+/* [RW 1] Output enable for TX PAUSE signal to the MAC. */
+#define NIG_REG_P0_MAC_PAUSE_OUT_EN 0x185b4
+/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
+ * future expansion) each priority is to be mapped to. Bits 3:0 specify the
+ * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
+ * priority field is extracted from the outer-most VLAN in receive packet.
+ * Only COS 0 and COS 1 are supported in E2.
+ */
+#define NIG_REG_P0_PKT_PRIORITY_TO_COS 0x18054
+/* [RW 6] Enable for TimeSync feature. Bits [2:0] are for RX side. Bits
+ * [5:3] are for TX side. Bit 0 enables TimeSync on RX side. Bit 1 enables
+ * V1 frame format in timesync event detection on RX side. Bit 2 enables V2
+ * frame format in timesync event detection on RX side. Bit 3 enables
+ * TimeSync on TX side. Bit 4 enables V1 frame format in timesync event
+ * detection on TX side. Bit 5 enables V2 frame format in timesync event
+ * detection on TX side. Note that for HW to detect PTP packet and extract
+ * data from the packet, at least one of the version bits of that traffic
+ * direction has to be enabled.
+ */
+#define NIG_REG_P0_PTP_EN 0x18788
+/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A
+ * priority is mapped to COS 0 when the corresponding mask bit is 1. More
+ * than one bit may be set; allowing multiple priorities to be mapped to one
+ * COS.
+ */
+#define NIG_REG_P0_RX_COS0_PRIORITY_MASK 0x18058
+/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A
+ * priority is mapped to COS 1 when the corresponding mask bit is 1. More
+ * than one bit may be set; allowing multiple priorities to be mapped to one
+ * COS.
+ */
+#define NIG_REG_P0_RX_COS1_PRIORITY_MASK 0x1805c
+/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 2. A
+ * priority is mapped to COS 2 when the corresponding mask bit is 1. More
+ * than one bit may be set; allowing multiple priorities to be mapped to one
+ * COS.
+ */
+#define NIG_REG_P0_RX_COS2_PRIORITY_MASK 0x186b0
+/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 3. A
+ * priority is mapped to COS 3 when the corresponding mask bit is 1. More
+ * than one bit may be set; allowing multiple priorities to be mapped to one
+ * COS.
+ */
+#define NIG_REG_P0_RX_COS3_PRIORITY_MASK 0x186b4
+/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 4. A
+ * priority is mapped to COS 4 when the corresponding mask bit is 1. More
+ * than one bit may be set; allowing multiple priorities to be mapped to one
+ * COS.
+ */
+#define NIG_REG_P0_RX_COS4_PRIORITY_MASK 0x186b8
+/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 5. A
+ * priority is mapped to COS 5 when the corresponding mask bit is 1. More
+ * than one bit may be set; allowing multiple priorities to be mapped to one
+ * COS.
+ */
+#define NIG_REG_P0_RX_COS5_PRIORITY_MASK 0x186bc
+/* [R 1] RX FIFO for receiving data from MAC is empty. */
+#define NIG_REG_P0_RX_MACFIFO_EMPTY 0x18570
+/* [R 1] TLLH FIFO is empty. */
+#define NIG_REG_P0_TLLH_FIFO_EMPTY 0x18308
+/* [RW 19] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * TX side. Bits [15:0] reflect the sequence ID of the packet. Bit 16
+ * indicates the validity of the data in the buffer. Bit 17 indicates that
+ * the sequence ID is valid and it is waiting for the TX timestamp value.
+ * Bit 18 indicates whether the timestamp is from a SW request (value of 1)
+ * or HW request (value of 0). Writing a 1 to bit 16 will clear the buffer.
+ */
+#define NIG_REG_P0_TLLH_PTP_BUF_SEQID 0x187e0
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * MCP. This location returns the lower 32 bits of timestamp value.
+ */
+#define NIG_REG_P0_TLLH_PTP_BUF_TS_LSB 0x187d8
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * MCP. This location returns the upper 32 bits of timestamp value.
+ */
+#define NIG_REG_P0_TLLH_PTP_BUF_TS_MSB 0x187dc
+/* [RW 11] Mask register for the various parameters used in determining PTP
+ * packet presence. Set each bit to 1 to mask out the particular parameter.
+ * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
+ * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
+ * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
+ * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
+ * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
+ * MAC DA 2. The reset default is set to mask out all parameters.
+ */
+#define NIG_REG_P0_TLLH_PTP_PARAM_MASK 0x187f0
+/* [RW 14] Mask register for the rules used in detecting PTP packets. Set
+ * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
+ * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
+ * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
+ * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
+ * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
+ * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
+ * default is to mask out all of the rules.
+ */
+#define NIG_REG_P0_TLLH_PTP_RULE_MASK 0x187f4
+/* [R 15] Specify which of the credit registers the client is to be mapped
+ * to. Bits[2:0] are for client 0; bits [14:12] are for client 4. For
+ * clients that are not subject to WFQ credit blocking - their
+ * specifications here are not used.
+ */
+#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP 0x180f0
+/* [RW 32] Specify which of the credit registers the client is to be mapped
+ * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are
+ * for client 0; bits [35:32] are for client 8. For clients that are not
+ * subject to WFQ credit blocking - their specifications here are not used.
+ * This is a new register (with 2_) added in E3 B0 to accommodate the 9
+ * input clients to ETS arbiter. The reset default is set for management and
+ * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
+ * use credit registers 0-5 respectively (0x543210876). Note that credit
+ * registers can not be shared between clients.
+ */
+#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB 0x18688
+/* [RW 4] Specify which of the credit registers the client is to be mapped
+ * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are
+ * for client 0; bits [35:32] are for client 8. For clients that are not
+ * subject to WFQ credit blocking - their specifications here are not used.
+ * This is a new register (with 2_) added in E3 B0 to accommodate the 9
+ * input clients to ETS arbiter. The reset default is set for management and
+ * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
+ * use credit registers 0-5 respectively (0x543210876). Note that credit
+ * registers can not be shared between clients.
+ */
+#define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB 0x1868c
+/* [RW 9] Specify whether the client competes directly in the strict
+ * priority arbiter. The bits are mapped according to client ID (client IDs
+ * are defined in tx_arb_priority_client2): 0-management; 1-debug traffic
+ * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1
+ * traffic; 5-COS2 traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic.
+ * Default value is set to enable strict priorities for all clients.
+ */
+#define NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT 0x180e8
+/* [RW 9] Specify whether the client is subject to WFQ credit blocking. The
+ * bits are mapped according to client ID (client IDs are defined in
+ * tx_arb_priority_client2): 0-management; 1-debug traffic from this port;
+ * 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2
+ * traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. Default value is
+ * 0 for not using WFQ credit blocking.
+ */
+#define NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x180ec
+/* [RW 32] Specify the upper bound that credit register 0 is allowed to
+ * reach.
+ */
+#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0 0x1810c
+#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1 0x18110
+#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2 0x18114
+#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3 0x18118
+#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4 0x1811c
+#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5 0x186a0
+#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6 0x186a4
+#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7 0x186a8
+#define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8 0x186ac
+/* [RW 32] Specify the weight (in bytes) to be added to credit register 0
+ * when it is time to increment.
+ */
+#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0 0x180f8
+#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1 0x180fc
+#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2 0x18100
+#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3 0x18104
+#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4 0x18108
+#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5 0x18690
+#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6 0x18694
+#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7 0x18698
+#define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8 0x1869c
+/* [RW 12] Specify the number of strict priority arbitration slots between
+ * two round-robin arbitration slots to avoid starvation. A value of 0 means
+ * no strict priority cycles - the strict priority with anti-starvation
+ * arbiter becomes a round-robin arbiter.
+ */
+#define NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS 0x180f4
+/* [R 15] Specify the client number to be assigned to each priority of the
+ * strict priority arbiter. Priority 0 is the highest priority. Bits [2:0]
+ * are for priority 0 client; bits [14:12] are for priority 4 client. The
+ * clients are assigned the following IDs: 0-management; 1-debug traffic
+ * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1
+ * traffic. The reset value[14:0] is set to 0x4688 (15'b100_011_010_001_000)
+ * for management at priority 0; debug traffic at priorities 1 and 2; COS0
+ * traffic at priority 3; and COS1 traffic at priority 4.
+ */
+#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT 0x180e4
+/* [RW 32] Specify the client number to be assigned to each priority of the
+ * strict priority arbiter. This register specifies bits 31:0 of the 36-bit
+ * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
+ * client; bits [35-32] are for priority 8 client. The clients are assigned
+ * the following IDs: 0-management; 1-debug traffic from this port; 2-debug
+ * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic;
+ * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is
+ * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
+ * accommodate the 9 input clients to ETS arbiter.
+ */
+#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB 0x18680
+/* [RW 4] Specify the client number to be assigned to each priority of the
+ * strict priority arbiter. This register specifies bits 35:32 of the 36-bit
+ * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
+ * client; bits [35-32] are for priority 8 client. The clients are assigned
+ * the following IDs: 0-management; 1-debug traffic from this port; 2-debug
+ * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic;
+ * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is
+ * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
+ * accommodate the 9 input clients to ETS arbiter.
+ */
+#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB 0x18684
+/* [R 1] TX FIFO for transmitting data to MAC is empty. */
+#define NIG_REG_P0_TX_MACFIFO_EMPTY 0x18578
+/* [RW 1] MCP-to-host path enable. Set this bit to enable the routing of MCP
+ * packets to BRB LB interface to forward the packet to the host. All
+ * packets from MCP are forwarded to the network when this bit is cleared -
+ * regardless of the configured destination in tx_mng_destination register.
+ * When MCP-to-host paths for both ports 0 and 1 are disabled - the arbiter
+ * for BRB LB interface is bypassed and PBF LB traffic is always selected to
+ * send to BRB LB.
+ */
+#define NIG_REG_P0_TX_MNG_HOST_ENABLE 0x182f4
+/* [R 1] FIFO empty status of the MCP TX FIFO used for storing MCP packets
+ * forwarded to the host.
+ */
+#define NIG_REG_P0_TX_MNG_HOST_FIFO_EMPTY 0x182a8
+/* [R 1] Indication that HBUF descriptor FIFO is empty. */
+#define NIG_REG_P1_HBUF_DSCR_EMPTY 0x18348
+/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
+ * Ethernet header.
+ */
+#define NIG_REG_P1_HDRS_AFTER_BASIC 0x1818c
+/* [RW 1] HW PFC enable bit. Set this bit to enable the PFC functionality in
+ * the NIG. Other flow control modes such as PAUSE and SAFC/LLFC should be
+ * disabled when this bit is set.
+ */
+#define NIG_REG_P1_HWPFC_ENABLE 0x181d0
+#define NIG_REG_P1_LLH_FUNC_MEM2 0x184c0
+/* [RW 17] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * the host. Bits [15:0] return the sequence ID of the packet. Bit 16
+ * indicates the validity of the data in the buffer. Writing a 1 to bit 16
+ * will clear the buffer.
+ */
+#define NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID 0x18774
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * the host. This location returns the lower 32 bits of timestamp value.
+ */
+#define NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB 0x1876c
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * the host. This location returns the upper 32 bits of timestamp value.
+ */
+#define NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB 0x18770
+/* [RW 11] Mask register for the various parameters used in determining PTP
+ * packet presence. Set each bit to 1 to mask out the particular parameter.
+ * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
+ * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
+ * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
+ * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
+ * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
+ * MAC DA 2. The reset default is set to mask out all parameters.
+ */
+#define NIG_REG_P1_LLH_PTP_PARAM_MASK 0x187c8
+/* [RW 14] Mask register for the rules used in detecting PTP packets. Set
+ * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
+ * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
+ * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
+ * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
+ * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
+ * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
+ * default is to mask out all of the rules. Note that rules 0-3 are for IPv4
+ * packets only and require that the packet is IPv4 for the rules to match.
+ * Note that rules 4-7 are for IPv6 packets only and require that the packet
+ * is IPv6 for the rules to match.
+ */
+#define NIG_REG_P1_LLH_PTP_RULE_MASK 0x187cc
+/* [RW 1] Set to 1 to enable PTP packets to be forwarded to the host. */
+#define NIG_REG_P1_LLH_PTP_TO_HOST 0x187d4
+/* [RW 1] Input enable for RX MAC interface. */
+#define NIG_REG_P1_MAC_IN_EN 0x185c0
+/* [RW 1] Output enable for TX MAC interface */
+#define NIG_REG_P1_MAC_OUT_EN 0x185c4
+/* [RW 1] Output enable for TX PAUSE signal to the MAC. */
+#define NIG_REG_P1_MAC_PAUSE_OUT_EN 0x185c8
+/* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
+ * future expansion) each priority is to be mapped to. Bits 3:0 specify the
+ * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
+ * priority field is extracted from the outer-most VLAN in receive packet.
+ * Only COS 0 and COS 1 are supported in E2.
+ */
+#define NIG_REG_P1_PKT_PRIORITY_TO_COS 0x181a8
+/* [RW 6] Enable for TimeSync feature. Bits [2:0] are for RX side. Bits
+ * [5:3] are for TX side. Bit 0 enables TimeSync on RX side. Bit 1 enables
+ * V1 frame format in timesync event detection on RX side. Bit 2 enables V2
+ * frame format in timesync event detection on RX side. Bit 3 enables
+ * TimeSync on TX side. Bit 4 enables V1 frame format in timesync event
+ * detection on TX side. Bit 5 enables V2 frame format in timesync event
+ * detection on TX side. Note that for HW to detect PTP packet and extract
+ * data from the packet, at least one of the version bits of that traffic
+ * direction has to be enabled.
+ */
+#define NIG_REG_P1_PTP_EN 0x187b0
+/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A
+ * priority is mapped to COS 0 when the corresponding mask bit is 1. More
+ * than one bit may be set; allowing multiple priorities to be mapped to one
+ * COS.
+ */
+#define NIG_REG_P1_RX_COS0_PRIORITY_MASK 0x181ac
+/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A
+ * priority is mapped to COS 1 when the corresponding mask bit is 1. More
+ * than one bit may be set; allowing multiple priorities to be mapped to one
+ * COS.
+ */
+#define NIG_REG_P1_RX_COS1_PRIORITY_MASK 0x181b0
+/* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 2. A
+ * priority is mapped to COS 2 when the corresponding mask bit is 1. More
+ * than one bit may be set; allowing multiple priorities to be mapped to one
+ * COS.
+ */
+#define NIG_REG_P1_RX_COS2_PRIORITY_MASK 0x186f8
+/* [R 1] RX FIFO for receiving data from MAC is empty. */
+#define NIG_REG_P1_RX_MACFIFO_EMPTY 0x1858c
+/* [R 1] TLLH FIFO is empty. */
+#define NIG_REG_P1_TLLH_FIFO_EMPTY 0x18338
+/* [RW 19] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * TX side. Bits [15:0] reflect the sequence ID of the packet. Bit 16
+ * indicates the validity of the data in the buffer. Bit 17 indicates that
+ * the sequence ID is valid and it is waiting for the TX timestamp value.
+ * Bit 18 indicates whether the timestamp is from a SW request (value of 1)
+ * or HW request (value of 0). Writing a 1 to bit 16 will clear the buffer.
+ */
+#define NIG_REG_P1_TLLH_PTP_BUF_SEQID 0x187ec
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * MCP. This location returns the lower 32 bits of timestamp value.
+ */
+#define NIG_REG_P1_TLLH_PTP_BUF_TS_LSB 0x187e4
+/* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
+ * MCP. This location returns the upper 32 bits of timestamp value.
+ */
+#define NIG_REG_P1_TLLH_PTP_BUF_TS_MSB 0x187e8
+/* [RW 11] Mask register for the various parameters used in determining PTP
+ * packet presence. Set each bit to 1 to mask out the particular parameter.
+ * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
+ * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
+ * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
+ * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
+ * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
+ * MAC DA 2. The reset default is set to mask out all parameters.
+ */
+#define NIG_REG_P1_TLLH_PTP_PARAM_MASK 0x187f8
+/* [RW 14] Mask register for the rules used in detecting PTP packets. Set
+ * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
+ * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
+ * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
+ * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
+ * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
+ * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
+ * default is to mask out all of the rules.
+ */
+#define NIG_REG_P1_TLLH_PTP_RULE_MASK 0x187fc
+/* [RW 32] Specify which of the credit registers the client is to be mapped
+ * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are
+ * for client 0; bits [35:32] are for client 8. For clients that are not
+ * subject to WFQ credit blocking - their specifications here are not used.
+ * This is a new register (with 2_) added in E3 B0 to accommodate the 9
+ * input clients to ETS arbiter. The reset default is set for management and
+ * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
+ * use credit registers 0-5 respectively (0x543210876). Note that credit
+ * registers can not be shared between clients. Note also that there are
+ * only COS0-2 in port 1- there is a total of 6 clients in port 1. Only
+ * credit registers 0-5 are valid. This register should be configured
+ * appropriately before enabling WFQ.
+ */
+#define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB 0x186e8
+/* [RW 4] Specify which of the credit registers the client is to be mapped
+ * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are
+ * for client 0; bits [35:32] are for client 8. For clients that are not
+ * subject to WFQ credit blocking - their specifications here are not used.
+ * This is a new register (with 2_) added in E3 B0 to accommodate the 9
+ * input clients to ETS arbiter. The reset default is set for management and
+ * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
+ * use credit registers 0-5 respectively (0x543210876). Note that credit
+ * registers can not be shared between clients. Note also that there are
+ * only COS0-2 in port 1- there is a total of 6 clients in port 1. Only
+ * credit registers 0-5 are valid. This register should be configured
+ * appropriately before enabling WFQ.
+ */
+#define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_MSB 0x186ec
+/* [RW 9] Specify whether the client competes directly in the strict
+ * priority arbiter. The bits are mapped according to client ID (client IDs
+ * are defined in tx_arb_priority_client2): 0-management; 1-debug traffic
+ * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1
+ * traffic; 5-COS2 traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic.
+ * Default value is set to enable strict priorities for all clients.
+ */
+#define NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT 0x18234
+/* [RW 9] Specify whether the client is subject to WFQ credit blocking. The
+ * bits are mapped according to client ID (client IDs are defined in
+ * tx_arb_priority_client2): 0-management; 1-debug traffic from this port;
+ * 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2
+ * traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. Default value is
+ * 0 for not using WFQ credit blocking.
+ */
+#define NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x18238
+/* [RW 32] Specify the upper bound that credit register 0 is allowed to
+ * reach.
+ */
+#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0 0x18258
+#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1 0x1825c
+#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2 0x18260
+#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3 0x18264
+#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4 0x18268
+#define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5 0x186f4
+/* [RW 32] Specify the weight (in bytes) to be added to credit register 0
+ * when it is time to increment.
+ */
+#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 0x18244
+#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 0x18248
+#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 0x1824c
+#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3 0x18250
+#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4 0x18254
+#define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5 0x186f0
+/* [RW 12] Specify the number of strict priority arbitration slots between
+ * two round-robin arbitration slots to avoid starvation. A value of 0 means
+ * no strict priority cycles - the strict priority with anti-starvation
+ * arbiter becomes a round-robin arbiter.
+ */
+#define NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS 0x18240
+/* [RW 32] Specify the client number to be assigned to each priority of the
+ * strict priority arbiter. This register specifies bits 31:0 of the 36-bit
+ * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
+ * client; bits [35-32] are for priority 8 client. The clients are assigned
+ * the following IDs: 0-management; 1-debug traffic from this port; 2-debug
+ * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic;
+ * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is
+ * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
+ * accommodate the 9 input clients to ETS arbiter. Note that this register
+ * is the same as the one for port 0, except that port 1 only has COS 0-2
+ * traffic. There is no traffic for COS 3-5 of port 1.
+ */
+#define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB 0x186e0
+/* [RW 4] Specify the client number to be assigned to each priority of the
+ * strict priority arbiter. This register specifies bits 35:32 of the 36-bit
+ * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
+ * client; bits [35-32] are for priority 8 client. The clients are assigned
+ * the following IDs: 0-management; 1-debug traffic from this port; 2-debug
+ * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic;
+ * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is
+ * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
+ * accommodate the 9 input clients to ETS arbiter. Note that this register
+ * is the same as the one for port 0, except that port 1 only has COS 0-2
+ * traffic. There is no traffic for COS 3-5 of port 1.
+ */
+#define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB 0x186e4
+/* [R 1] TX FIFO for transmitting data to MAC is empty. */
+#define NIG_REG_P1_TX_MACFIFO_EMPTY 0x18594
+/* [RW 1] MCP-to-host path enable. Set this bit to enable the routing of MCP
+ * packets to BRB LB interface to forward the packet to the host. All
+ * packets from MCP are forwarded to the network when this bit is cleared -
+ * regardless of the configured destination in tx_mng_destination register.
+ */
+#define NIG_REG_P1_TX_MNG_HOST_ENABLE 0x182f8
+/* [R 1] FIFO empty status of the MCP TX FIFO used for storing MCP packets
+ * forwarded to the host.
+ */
+#define NIG_REG_P1_TX_MNG_HOST_FIFO_EMPTY 0x182b8
+/* [RW 1] Pause enable for port0. This register may get 1 only when
+ * ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same
+ * port
+ */
+#define NIG_REG_PAUSE_ENABLE_0 0x160c0
+#define NIG_REG_PAUSE_ENABLE_1 0x160c4
+/* [RW 1] Value of this register will be transmitted to port swap when
+ * ~nig_registers_strap_override.strap_override =1
+ */
+#define NIG_REG_PORT_SWAP 0x10394
+/* [RW 1] PPP enable for port0. This register may get 1 only when
+ * ~safc_enable.safc_enable = 0 and pause_enable.pause_enable =0 for the
+ * same port
+ */
+#define NIG_REG_PPP_ENABLE_0 0x160b0
+#define NIG_REG_PPP_ENABLE_1 0x160b4
+/* [RW 1] Input enable for RX parser request IF */
+#define NIG_REG_PRS_REQ_IN_EN 0x100b8
+/* [R 5] control to serdes - CL45 DEVAD */
+#define NIG_REG_SERDES0_CTRL_MD_DEVAD 0x10370
+/* [R 1] control to serdes; 0 - clause 45; 1 - clause 22 */
+#define NIG_REG_SERDES0_CTRL_MD_ST 0x1036c
+/* [R 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */
+#define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374
+/* [R 1] status from serdes0 that inputs to interrupt logic of link status */
+#define NIG_REG_SERDES0_STATUS_LINK_STATUS 0x10578
+/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
+ * for port 0 COS0
+ */
+#define NIG_REG_STAT0_BRB_DISCARD 0x105f0
+/* [R 32] Rx statistics : In user packets truncated due to BRB backpressure
+ * for port 0 COS0
+ */
+#define NIG_REG_STAT0_BRB_TRUNCATE 0x105f8
+/* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
+ * between 1024 and 1522 bytes for port0
+ */
+#define NIG_REG_STAT0_EGRESS_MAC_PKT0 0x10750
+/* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
+ * between 1523 bytes and above for port0
+ */
+#define NIG_REG_STAT0_EGRESS_MAC_PKT1 0x10760
+/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
+ * for port 1 COS0
+ */
+#define NIG_REG_STAT1_BRB_DISCARD 0x10628
+/* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
+ * between 1024 and 1522 bytes for port1
+ */
+#define NIG_REG_STAT1_EGRESS_MAC_PKT0 0x107a0
+/* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
+ * between 1523 bytes and above for port1
+ */
+#define NIG_REG_STAT1_EGRESS_MAC_PKT1 0x107b0
+/* [WB_R 64] Rx statistics : User octets received for LP */
+#define NIG_REG_STAT2_BRB_OCTET 0x107e0
+#define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328
+/* [RW 1] port swap mux selection. If this register equal to 0 then port
+ * swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
+ * ort swap is equal to ~nig_registers_port_swap.port_swap
+ */
+#define NIG_REG_STRAP_OVERRIDE 0x10398
+/* [WB 64] Addresses for TimeSync related registers in the timesync
+ * generator sub-module.
+ */
+#define NIG_REG_TIMESYNC_GEN_REG 0x18800
+/* [RW 1] output enable for RX_XCM0 IF */
+#define NIG_REG_XCM0_OUT_EN 0x100f0
+/* [RW 1] output enable for RX_XCM1 IF */
+#define NIG_REG_XCM1_OUT_EN 0x100f4
+/* [R 1] control to xgxs - remote PHY in-band MDIO */
+#define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348
+/* [R 5] control to xgxs - CL45 DEVAD */
+#define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c
+/* [R 1] control to xgxs; 0 - clause 45; 1 - clause 22 */
+#define NIG_REG_XGXS0_CTRL_MD_ST 0x10338
+/* [R 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */
+#define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340
+/* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */
+#define NIG_REG_XGXS0_STATUS_LINK10G 0x10680
+/* [R 4] status from xgxs0 that inputs to interrupt logic of link status */
+#define NIG_REG_XGXS0_STATUS_LINK_STATUS 0x10684
+/* [R 2] selection for XGXS lane of port 0 in NIG_MUX block */
+#define NIG_REG_XGXS_LANE_SEL_P0 0x102e8
+/* [R 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */
+#define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0
+#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT (0x1 << 0)
+#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1 << 9)
+#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1 << 15)
+#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf << 18)
+#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18
+/* [RW 1] Interrupt mask register #0 read/write */
+#define NIG_TSGEN_REG_NIG_TSGEN_INT_MASK 0xcc
+/* [R 1] Interrupt register #0 read */
+#define NIG_TSGEN_REG_NIG_TSGEN_INT_STS 0xc0
+/* [RC 1] Interrupt register #0 read clear */
+#define NIG_TSGEN_REG_NIG_TSGEN_INT_STS_CLR 0xc4
+/* [R 31] Removed for E3 B0 -The upper bound of the weight of COS0 in the
+ * ETS command arbiter.
+ */
+#define PBF_REG_COS0_UPPER_BOUND 0x15c05c
+/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter
+ * of port 0.
+ */
+#define PBF_REG_COS0_UPPER_BOUND_P0 0x15c2cc
+/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter
+ * of port 1.
+ */
+#define PBF_REG_COS0_UPPER_BOUND_P1 0x15c2e4
+/* [R 31] Removed for E3 B0 - The weight of COS0 in the ETS command arbiter. */
+#define PBF_REG_COS0_WEIGHT 0x15c054
+/* [RW 31] The weight of COS0 in port 0 ETS command arbiter. */
+#define PBF_REG_COS0_WEIGHT_P0 0x15c2a8
+/* [RW 31] The weight of COS0 in port 1 ETS command arbiter. */
+#define PBF_REG_COS0_WEIGHT_P1 0x15c2c0
+/* [R 31] Removed for E3 B0 -The upper bound of the weight of COS1 in the
+ * ETS command arbiter.
+ */
+#define PBF_REG_COS1_UPPER_BOUND 0x15c060
+/* [R 31] Removed for E3 B0 - The weight of COS1 in the ETS command arbiter. */
+#define PBF_REG_COS1_WEIGHT 0x15c058
+/* [RW 31] The weight of COS1 in port 0 ETS command arbiter. */
+#define PBF_REG_COS1_WEIGHT_P0 0x15c2ac
+/* [RW 31] The weight of COS1 in port 1 ETS command arbiter. */
+#define PBF_REG_COS1_WEIGHT_P1 0x15c2c4
+/* [RW 31] The weight of COS2 in port 0 ETS command arbiter. */
+#define PBF_REG_COS2_WEIGHT_P0 0x15c2b0
+/* [RW 31] The weight of COS2 in port 1 ETS command arbiter. */
+#define PBF_REG_COS2_WEIGHT_P1 0x15c2c8
+/* [RW 31] The weight of COS3 in port 0 ETS command arbiter. */
+#define PBF_REG_COS3_WEIGHT_P0 0x15c2b4
+/* [RW 31] The weight of COS4 in port 0 ETS command arbiter. */
+#define PBF_REG_COS4_WEIGHT_P0 0x15c2b8
+/* [RW 31] The weight of COS5 in port 0 ETS command arbiter. */
+#define PBF_REG_COS5_WEIGHT_P0 0x15c2bc
+/* [R 11] Current credit for the LB queue in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_CREDIT_LB_Q 0x140338
+/* [R 11] Current credit for queue 0 in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_CREDIT_Q0 0x14033c
+/* [R 11] Current credit for queue 1 in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_CREDIT_Q1 0x140340
+/* [R 11] Current credit for queue 2 in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_CREDIT_Q2 0x140344
+/* [R 11] Current credit for queue 3 in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_CREDIT_Q3 0x140348
+/* [R 11] Current credit for queue 4 in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_CREDIT_Q4 0x14034c
+/* [R 11] Current credit for queue 5 in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_CREDIT_Q5 0x140350
+/* [R 1] Removed for E3 B0 - Disable processing further tasks from port 0
+ * (after ending the current task in process).
+ */
+#define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c
+/* [R 1] Removed for E3 B0 - Disable processing further tasks from port 1
+ * (after ending the current task in process).
+ */
+#define PBF_REG_DISABLE_NEW_TASK_PROC_P1 0x140060
+/* [RW 1] Disable processing further tasks from port 0 (after ending the
+ * current task in process).
+ */
+#define PBF_REG_DISABLE_NEW_TASK_PROC_Q0 0x15c1bc
+/* [RW 1] Disable processing further tasks from port 0 (after ending the
+ * current task in process).
+ */
+#define PBF_REG_DISABLE_NEW_TASK_PROC_Q1 0x15c1c0
+/* [RW 1] Disable processing further tasks from port 0 (after ending the
+ * current task in process).
+ */
+#define PBF_REG_DISABLE_NEW_TASK_PROC_Q2 0x15c1c4
+/* [RW 1] Disable processing further tasks from port 0 (after ending the
+ * current task in process).
+ */
+#define PBF_REG_DISABLE_NEW_TASK_PROC_Q3 0x15c1c8
+/* [RW 1] Disable processing further tasks from port 0 (after ending the
+ * current task in process).
+ */
+#define PBF_REG_DISABLE_NEW_TASK_PROC_Q4 0x15c1cc
+/* [RW 1] Disable processing further tasks from port 0 (after ending the
+ * current task in process).
+ */
+#define PBF_REG_DISABLE_NEW_TASK_PROC_Q5 0x15c1d0
+#define PBF_REG_DISABLE_PF 0x1402e8
+#define PBF_REG_DISABLE_VF 0x1402ec
+/* [RW 18] For port 0: For each client that is subject to WFQ (the
+ * corresponding bit is 1); indicates to which of the credit registers this
+ * client is mapped. For clients which are not credit blocked; their mapping
+ * is dont care.
+ */
+#define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0 0x15c288
+/* [RW 9] For port 1: For each client that is subject to WFQ (the
+ * corresponding bit is 1); indicates to which of the credit registers this
+ * client is mapped. For clients which are not credit blocked; their mapping
+ * is dont care.
+ */
+#define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1 0x15c28c
+/* [RW 6] For port 0: Bit per client to indicate if the client competes in
+ * the strict priority arbiter directly (corresponding bit = 1); or first
+ * goes to the RR arbiter (corresponding bit = 0); and then competes in the
+ * lowest priority in the strict-priority arbiter.
+ */
+#define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 0x15c278
+/* [RW 3] For port 1: Bit per client to indicate if the client competes in
+ * the strict priority arbiter directly (corresponding bit = 1); or first
+ * goes to the RR arbiter (corresponding bit = 0); and then competes in the
+ * lowest priority in the strict-priority arbiter.
+ */
+#define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 0x15c27c
+/* [RW 6] For port 0: Bit per client to indicate if the client is subject to
+ * WFQ credit blocking (corresponding bit = 1).
+ */
+#define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0 0x15c280
+/* [RW 3] For port 0: Bit per client to indicate if the client is subject to
+ * WFQ credit blocking (corresponding bit = 1).
+ */
+#define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 0x15c284
+/* [RW 16] For port 0: The number of strict priority arbitration slots
+ * between 2 RR arbitration slots. A value of 0 means no strict priority
+ * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR
+ * arbiter.
+ */
+#define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0 0x15c2a0
+/* [RW 16] For port 1: The number of strict priority arbitration slots
+ * between 2 RR arbitration slots. A value of 0 means no strict priority
+ * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR
+ * arbiter.
+ */
+#define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1 0x15c2a4
+/* [RW 18] For port 0: Indicates which client is connected to each priority
+ * in the strict-priority arbiter. Priority 0 is the highest priority, and
+ * priority 5 is the lowest; to which the RR output is connected to (this is
+ * not configurable).
+ */
+#define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 0x15c270
+/* [RW 9] For port 1: Indicates which client is connected to each priority
+ * in the strict-priority arbiter. Priority 0 is the highest priority, and
+ * priority 5 is the lowest; to which the RR output is connected to (this is
+ * not configurable).
+ */
+#define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 0x15c274
+/* [R 1] Removed for E3 B0 - Indicates that ETS is performed between the
+ * COSes in the command arbiter. If reset strict priority w/ anti-starvation
+ * will be performed w/o WFQ.
+ */
+#define PBF_REG_ETS_ENABLED 0x15c050
+/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
+ * Ethernet header.
+ */
+#define PBF_REG_HDRS_AFTER_BASIC 0x15c0a8
+/* [RW 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 */
+#define PBF_REG_HDRS_AFTER_TAG_0 0x15c0b8
+/* [R 1] Removed for E3 B0 - Indicates which COS is connected to the highest
+ * priority in the command arbiter.
+ */
+#define PBF_REG_HIGH_PRIORITY_COS_NUM 0x15c04c
+/* [RW 11] Initial credit for the LB queue in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_INIT_CRD_LB_Q 0x15c248
+/* [RW 11] Initial credit for queue 0 in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_INIT_CRD_Q0 0x15c230
+/* [RW 11] Initial credit for queue 1 in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_INIT_CRD_Q1 0x15c234
+/* [RW 11] Initial credit for queue 2 in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_INIT_CRD_Q2 0x15c238
+/* [RW 11] Initial credit for queue 3 in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_INIT_CRD_Q3 0x15c23c
+/* [RW 11] Initial credit for queue 4 in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_INIT_CRD_Q4 0x15c240
+/* [RW 11] Initial credit for queue 5 in the tx port buffers in 16 byte
+ * lines.
+ */
+#define PBF_REG_INIT_CRD_Q5 0x15c244
+/* [R 1] Removed for E3 B0 - Init bit for port 0. When set the initial
+ * credit of port 0 is copied to the credit register. Should be set and then
+ * reset after the configuration of the port has ended.
+ */
+#define PBF_REG_INIT_P0 0x140004
+/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
+ * the LB queue. Reset upon init.
+ */
+#define PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q 0x140354
+/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
+ * queue 0. Reset upon init.
+ */
+#define PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 0x140358
+/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
+ * queue 1. Reset upon init.
+ */
+#define PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 0x14035c
+/* [RW 1] Enable for mac interface 0. */
+#define PBF_REG_MAC_IF0_ENABLE 0x140030
+/* [RW 6] Bit-map indicating which headers must appear in the packet */
+#define PBF_REG_MUST_HAVE_HDRS 0x15c0c4
+/* [R 16] Removed for E3 B0 - The number of strict priority arbitration
+ * slots between 2 RR arbitration slots. A value of 0 means no strict
+ * priority cycles; i.e. the strict-priority w/ anti-starvation arbiter is a
+ * RR arbiter.
+ */
+#define PBF_REG_NUM_STRICT_ARB_SLOTS 0x15c064
+/* [R 11] Removed for E3 B0 - Port 0 threshold used by arbiter in 16 byte
+ * lines used when pause not supported.
+ */
+#define PBF_REG_P0_ARB_THRSH 0x1400e4
+/* [R 11] Removed for E3 B0 - Current credit for port 0 in the tx port
+ * buffers in 16 byte lines.
+ */
+#define PBF_REG_P0_CREDIT 0x140200
+/* [R 11] Removed for E3 B0 - Initial credit for port 0 in the tx port
+ * buffers in 16 byte lines.
+ */
+#define PBF_REG_P0_INIT_CRD 0x1400d0
+/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
+ * port 0. Reset upon init.
+ */
+#define PBF_REG_P0_INTERNAL_CRD_FREED_CNT 0x140308
+/* [R 1] Removed for E3 B0 - Indication that pause is enabled for port 0. */
+#define PBF_REG_P0_PAUSE_ENABLE 0x140014
+/* [R 8] Removed for E3 B0 - Number of tasks in port 0 task queue. */
+#define PBF_REG_P0_TASK_CNT 0x140204
+/* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines
+ * freed from the task queue of port 0. Reset upon init.
+ */
+#define PBF_REG_P0_TQ_LINES_FREED_CNT 0x1402f0
+/* [R 12] Number of 8 bytes lines occupied in the task queue of port 0. */
+#define PBF_REG_P0_TQ_OCCUPANCY 0x1402fc
+/* [R 11] Removed for E3 B0 - Current credit for port 1 in the tx port
+ * buffers in 16 byte lines.
+ */
+#define PBF_REG_P1_CREDIT 0x140208
+/* [R 11] Removed for E3 B0 - Initial credit for port 0 in the tx port
+ * buffers in 16 byte lines.
+ */
+#define PBF_REG_P1_INIT_CRD 0x1400d4
+/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
+ * port 1. Reset upon init.
+ */
+#define PBF_REG_P1_INTERNAL_CRD_FREED_CNT 0x14030c
+/* [R 8] Removed for E3 B0 - Number of tasks in port 1 task queue. */
+#define PBF_REG_P1_TASK_CNT 0x14020c
+/* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines
+ * freed from the task queue of port 1. Reset upon init.
+ */
+#define PBF_REG_P1_TQ_LINES_FREED_CNT 0x1402f4
+/* [R 12] Number of 8 bytes lines occupied in the task queue of port 1. */
+#define PBF_REG_P1_TQ_OCCUPANCY 0x140300
+/* [R 11] Removed for E3 B0 - Current credit for port 4 in the tx port
+ * buffers in 16 byte lines.
+ */
+#define PBF_REG_P4_CREDIT 0x140210
+/* [R 11] Removed for E3 B0 - Initial credit for port 0 in the tx port
+ * buffers in 16 byte lines.
+ */
+#define PBF_REG_P4_INIT_CRD 0x1400e0
+/* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
+ * port 4. Reset upon init.
+ */
+#define PBF_REG_P4_INTERNAL_CRD_FREED_CNT 0x140310
+/* [R 8] Removed for E3 B0 - Number of tasks in port 4 task queue. */
+#define PBF_REG_P4_TASK_CNT 0x140214
+/* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines
+ * freed from the task queue of port 4. Reset upon init.
+ */
+#define PBF_REG_P4_TQ_LINES_FREED_CNT 0x1402f8
+/* [R 12] Number of 8 bytes lines occupied in the task queue of port 4. */
+#define PBF_REG_P4_TQ_OCCUPANCY 0x140304
+/* [RW 7] Interrupt mask register #0 read/write */
+#define PBF_REG_PBF_INT_MASK 0x1401d4
+/* [R 7] Interrupt register #0 read */
+#define PBF_REG_PBF_INT_STS 0x1401c8
+/* [RC 7] Interrupt register #0 read clear */
+#define PBF_REG_PBF_INT_STS_CLR 0x1401cc
+/* [RW 28] Parity mask register #0 read/write */
+#define PBF_REG_PBF_PRTY_MASK 0x1401e4
+/* [R 28] Parity register #0 read */
+#define PBF_REG_PBF_PRTY_STS 0x1401d8
+/* [RC 28] Parity register #0 read clear */
+#define PBF_REG_PBF_PRTY_STS_CLR 0x1401dc
+/* [RW 16] The Ethernet type value for L2 tag 0 */
+#define PBF_REG_TAG_ETHERTYPE_0 0x15c090
+/* [RW 4] The length of the info field for L2 tag 0. The length is between
+ * 2B and 14B; in 2B granularity
+ */
+#define PBF_REG_TAG_LEN_0 0x15c09c
+/* [R 8] Number of tasks in queue 0 task queue. */
+#define PBF_REG_TASK_CNT_LB_Q 0x140370
+/* [R 8] Number of tasks in queue 0 task queue. */
+#define PBF_REG_TASK_CNT_Q0 0x140374
+/* [R 8] Number of tasks in queue 0 task queue. */
+#define PBF_REG_TASK_CNT_Q1 0x140378
+/* [R 8] Number of tasks in queue 0 task queue. */
+#define PBF_REG_TASK_CNT_Q2 0x14037c
+/* [R 8] Number of tasks in queue 0 task queue. */
+#define PBF_REG_TASK_CNT_Q3 0x140380
+/* [R 8] Number of tasks in queue 0 task queue. */
+#define PBF_REG_TASK_CNT_Q4 0x140384
+/* [R 8] Number of tasks in queue 0 task queue. */
+#define PBF_REG_TASK_CNT_Q5 0x140388
+/* [R 32] Cyclic counter for number of 8 byte lines freed from the LB task
+ * queue. Reset upon init.
+ */
+#define PBF_REG_TQ_LINES_FREED_CNT_LB_Q 0x14038c
+/* [R 32] Cyclic counter for number of 8 byte lines freed from the task
+ * queue 0. Reset upon init.
+ */
+#define PBF_REG_TQ_LINES_FREED_CNT_Q0 0x140390
+/* [R 32] Cyclic counter for number of 8 byte lines freed from task queue 1.
+ * Reset upon init.
+ */
+#define PBF_REG_TQ_LINES_FREED_CNT_Q1 0x140394
+/* [R 13] Number of 8 bytes lines occupied in the task queue of the LB
+ * queue.
+ */
+#define PBF_REG_TQ_OCCUPANCY_LB_Q 0x1403a8
+/* [R 13] Number of 8 bytes lines occupied in the task queue of queue 0. */
+#define PBF_REG_TQ_OCCUPANCY_Q0 0x1403ac
+/* [R 13] Number of 8 bytes lines occupied in the task queue of queue 1. */
+#define PBF_REG_TQ_OCCUPANCY_Q1 0x1403b0
+/* [RW 16] One of 8 values that should be compared to type in Ethernet
+ * parsing. If there is a match; the field after Ethernet is the first VLAN.
+ * Reset value is 0x8100 which is the standard VLAN type. Note that when
+ * checking second VLAN; type is compared only to 0x8100.
+ */
+#define PBF_REG_VLAN_TYPE_0 0x15c06c
+/* [RW 2] Interrupt mask register #0 read/write */
+#define PB_REG_PB_INT_MASK 0x28
+/* [R 2] Interrupt register #0 read */
+#define PB_REG_PB_INT_STS 0x1c
+/* [RC 2] Interrupt register #0 read clear */
+#define PB_REG_PB_INT_STS_CLR 0x20
+/* [RW 4] Parity mask register #0 read/write */
+#define PB_REG_PB_PRTY_MASK 0x38
+/* [R 4] Parity register #0 read */
+#define PB_REG_PB_PRTY_STS 0x2c
+/* [RC 4] Parity register #0 read clear */
+#define PB_REG_PB_PRTY_STS_CLR 0x30
+#define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR (0x1 << 0)
+#define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW (0x1 << 8)
+#define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR (0x1 << 1)
+#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN (0x1 << 6)
+#define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN (0x1 << 7)
+#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN (0x1 << 4)
+#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN (0x1 << 3)
+#define PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN (0x1 << 5)
+#define PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN (0x1 << 2)
+/* [R 8] Config space A attention dirty bits. Each bit indicates that the
+ * corresponding PF generates config space A attention. Set by PXP. Reset by
+ * MCP writing 1 to icfg_space_a_request_clr. Note: register contains bits
+ * from both paths.
+ */
+#define PGLUE_B_REG_CFG_SPACE_A_REQUEST 0x9010
+/* [R 8] Config space B attention dirty bits. Each bit indicates that the
+ * corresponding PF generates config space B attention. Set by PXP. Reset by
+ * MCP writing 1 to icfg_space_b_request_clr. Note: register contains bits
+ * from both paths.
+ */
+#define PGLUE_B_REG_CFG_SPACE_B_REQUEST 0x9014
+/* [R 8] FLR request attention dirty bits for PFs 0 to 7. Each bit indicates
+ * that the FLR register of the corresponding PF was set. Set by PXP. Reset
+ * by MCP writing 1 to flr_request_pf_7_0_clr. Note: register contains bits
+ * from both paths.
+ */
+#define PGLUE_B_REG_FLR_REQUEST_PF_7_0 0x9028
+/* [W 8] FLR request attention dirty bits clear for PFs 0 to 7. MCP writes 1
+ * to a bit in this register in order to clear the corresponding bit in
+ * flr_request_pf_7_0 register. Note: register contains bits from both
+ * paths.
+ */
+#define PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR 0x9418
+/* [R 32] FLR request attention dirty bits for VFs 96 to 127. Each bit
+ * indicates that the FLR register of the corresponding VF was set. Set by
+ * PXP. Reset by MCP writing 1 to flr_request_vf_127_96_clr.
+ */
+#define PGLUE_B_REG_FLR_REQUEST_VF_127_96 0x9024
+/* [R 32] FLR request attention dirty bits for VFs 0 to 31. Each bit
+ * indicates that the FLR register of the corresponding VF was set. Set by
+ * PXP. Reset by MCP writing 1 to flr_request_vf_31_0_clr.
+ */
+#define PGLUE_B_REG_FLR_REQUEST_VF_31_0 0x9018
+/* [R 32] FLR request attention dirty bits for VFs 32 to 63. Each bit
+ * indicates that the FLR register of the corresponding VF was set. Set by
+ * PXP. Reset by MCP writing 1 to flr_request_vf_63_32_clr.
+ */
+#define PGLUE_B_REG_FLR_REQUEST_VF_63_32 0x901c
+/* [R 32] FLR request attention dirty bits for VFs 64 to 95. Each bit
+ * indicates that the FLR register of the corresponding VF was set. Set by
+ * PXP. Reset by MCP writing 1 to flr_request_vf_95_64_clr.
+ */
+#define PGLUE_B_REG_FLR_REQUEST_VF_95_64 0x9020
+/* [R 8] Each bit indicates an incorrect behavior in user RX interface. Bit
+ * 0 - Target memory read arrived with a correctable error. Bit 1 - Target
+ * memory read arrived with an uncorrectable error. Bit 2 - Configuration RW
+ * arrived with a correctable error. Bit 3 - Configuration RW arrived with
+ * an uncorrectable error. Bit 4 - Completion with Configuration Request
+ * Retry Status. Bit 5 - Expansion ROM access received with a write request.
+ * Bit 6 - Completion with pcie_rx_err of 0000; CMPL_STATUS of non-zero; and
+ * pcie_rx_last not asserted. Bit 7 - Completion with pcie_rx_err of 1010;
+ * and pcie_rx_last not asserted.
+ */
+#define PGLUE_B_REG_INCORRECT_RCV_DETAILS 0x9068
+#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER 0x942c
+#define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ 0x9430
+#define PGLUE_B_REG_INTERNAL_VFID_ENABLE 0x9438
+/* [W 7] Writing 1 to each bit in this register clears a corresponding error
+ * details register and enables logging new error details. Bit 0 - clears
+ * INCORRECT_RCV_DETAILS; Bit 1 - clears RX_ERR_DETAILS; Bit 2 - clears
+ * TX_ERR_WR_ADD_31_0 TX_ERR_WR_ADD_63_32 TX_ERR_WR_DETAILS
+ * TX_ERR_WR_DETAILS2 TX_ERR_RD_ADD_31_0 TX_ERR_RD_ADD_63_32
+ * TX_ERR_RD_DETAILS TX_ERR_RD_DETAILS2 TX_ERR_WR_DETAILS_ICPL; Bit 3 -
+ * clears VF_LENGTH_VIOLATION_DETAILS. Bit 4 - clears
+ * VF_GRC_SPACE_VIOLATION_DETAILS. Bit 5 - clears RX_TCPL_ERR_DETAILS. Bit 6
+ * - clears TCPL_IN_TWO_RCBS_DETAILS.
+ */
+#define PGLUE_B_REG_LATCHED_ERRORS_CLR 0x943c
+/* [RW 11] Interrupt mask register #0 read/write */
+#define PGLUE_B_REG_PGLUE_B_INT_MASK 0x92a4
+/* [R 11] Interrupt register #0 read */
+#define PGLUE_B_REG_PGLUE_B_INT_STS 0x9298
+/* [RC 11] Interrupt register #0 read clear */
+#define PGLUE_B_REG_PGLUE_B_INT_STS_CLR 0x929c
+/* [RW 2] Parity mask register #0 read/write */
+#define PGLUE_B_REG_PGLUE_B_PRTY_MASK 0x92b4
+/* [R 2] Parity register #0 read */
+#define PGLUE_B_REG_PGLUE_B_PRTY_STS 0x92a8
+/* [RC 2] Parity register #0 read clear */
+#define PGLUE_B_REG_PGLUE_B_PRTY_STS_CLR 0x92ac
+/* [R 13] Details of first request received with error. [2:0] - PFID. [3] -
+ * VF_VALID. [9:4] - VFID. [11:10] - Error Code - 0 - Indicates Completion
+ * Timeout of a User Tx non-posted request. 1 - unsupported request. 2 -
+ * completer abort. 3 - Illegal value for this field. [12] valid - indicates
+ * if there was a completion error since the last time this register was
+ * cleared.
+ */
+#define PGLUE_B_REG_RX_ERR_DETAILS 0x9080
+/* [R 18] Details of first ATS Translation Completion request received with
+ * error. [2:0] - PFID. [3] - VF_VALID. [9:4] - VFID. [11:10] - Error Code -
+ * 0 - Indicates Completion Timeout of a User Tx non-posted request. 1 -
+ * unsupported request. 2 - completer abort. 3 - Illegal value for this
+ * field. [16:12] - ATC OTB EntryID. [17] valid - indicates if there was a
+ * completion error since the last time this register was cleared.
+ */
+#define PGLUE_B_REG_RX_TCPL_ERR_DETAILS 0x9084
+/* [W 8] Debug only - Shadow BME bits clear for PFs 0 to 7. MCP writes 1 to
+ * a bit in this register in order to clear the corresponding bit in
+ * shadow_bme_pf_7_0 register. MCP should never use this unless a
+ * work-around is needed. Note: register contains bits from both paths.
+ */
+#define PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR 0x9458
+/* [R 8] SR IOV disabled attention dirty bits. Each bit indicates that the
+ * VF enable register of the corresponding PF is written to 0 and was
+ * previously 1. Set by PXP. Reset by MCP writing 1 to
+ * sr_iov_disabled_request_clr. Note: register contains bits from both
+ * paths.
+ */
+#define PGLUE_B_REG_SR_IOV_DISABLED_REQUEST 0x9030
+/* [R 32] Indicates the status of tags 32-63. 0 - tags is used - read
+ * completion did not return yet. 1 - tag is unused. Same functionality as
+ * pxp2_registers_pgl_exp_rom_data2 for tags 0-31.
+ */
+#define PGLUE_B_REG_TAGS_63_32 0x9244
+/* [R 32] Address [31:0] of first read request not submitted due to error */
+#define PGLUE_B_REG_TX_ERR_RD_ADD_31_0 0x9098
+/* [R 32] Address [63:32] of first read request not submitted due to error */
+#define PGLUE_B_REG_TX_ERR_RD_ADD_63_32 0x909c
+/* [R 31] Details of first read request not submitted due to error. [4:0]
+ * VQID. [5] TREQ. 1 - Indicates the request is a Translation Request.
+ * [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] -
+ * VFID.
+ */
+#define PGLUE_B_REG_TX_ERR_RD_DETAILS 0x90a0
+/* [R 26] Details of first read request not submitted due to error. [15:0]
+ * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type -
+ * [21] - Indicates was_error was set; [22] - Indicates BME was cleared;
+ * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent
+ * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid -
+ * indicates if there was a request not submitted due to error since the
+ * last time this register was cleared.
+ */
+#define PGLUE_B_REG_TX_ERR_RD_DETAILS2 0x90a4
+/* [R 32] Address [31:0] of first write request not submitted due to error */
+#define PGLUE_B_REG_TX_ERR_WR_ADD_31_0 0x9088
+/* [R 32] Address [63:32] of first write request not submitted due to error */
+#define PGLUE_B_REG_TX_ERR_WR_ADD_63_32 0x908c
+/* [R 31] Details of first write request not submitted due to error. [4:0]
+ * VQID. [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25]
+ * - VFID.
+ */
+#define PGLUE_B_REG_TX_ERR_WR_DETAILS 0x9090
+/* [R 26] Details of first write request not submitted due to error. [15:0]
+ * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type -
+ * [21] - Indicates was_error was set; [22] - Indicates BME was cleared;
+ * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent
+ * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid -
+ * indicates if there was a request not submitted due to error since the
+ * last time this register was cleared.
+ */
+#define PGLUE_B_REG_TX_ERR_WR_DETAILS2 0x9094
+/* [R 26] Details of first target VF request accessing VF GRC space that
+ * failed permission check. [14:0] Address. [15] w_nr: 0 - Read; 1 - Write.
+ * [21:16] VFID. [24:22] - PFID. [25] valid - indicates if there was a
+ * request accessing VF GRC space that failed permission check since the
+ * last time this register was cleared. Permission checks are: function
+ * permission; R/W permission; address range permission.
+ */
+#define PGLUE_B_REG_VF_GRC_SPACE_VIOLATION_DETAILS 0x9234
+/* [R 31] Details of first target VF request with length violation (too many
+ * DWs) accessing BAR0. [12:0] Address in DWs (bits [14:2] of byte address).
+ * [14:13] BAR. [20:15] VFID. [23:21] - PFID. [29:24] - Length in DWs. [30]
+ * valid - indicates if there was a request with length violation since the
+ * last time this register was cleared. Length violations: length of more
+ * than 2DWs; length of 2DWs and address not QW aligned; window is GRC and
+ * length is more than 1 DW.
+ */
+#define PGLUE_B_REG_VF_LENGTH_VIOLATION_DETAILS 0x9230
+/* [R 8] Was_error indication dirty bits for PFs 0 to 7. Each bit indicates
+ * that there was a completion with uncorrectable error for the
+ * corresponding PF. Set by PXP. Reset by MCP writing 1 to
+ * was_error_pf_7_0_clr.
+ */
+#define PGLUE_B_REG_WAS_ERROR_PF_7_0 0x907c
+/* [W 8] Was_error indication dirty bits clear for PFs 0 to 7. MCP writes 1
+ * to a bit in this register in order to clear the corresponding bit in
+ * flr_request_pf_7_0 register.
+ */
+#define PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR 0x9470
+/* [R 32] Was_error indication dirty bits for VFs 96 to 127. Each bit
+ * indicates that there was a completion with uncorrectable error for the
+ * corresponding VF. Set by PXP. Reset by MCP writing 1 to
+ * was_error_vf_127_96_clr.
+ */
+#define PGLUE_B_REG_WAS_ERROR_VF_127_96 0x9078
+/* [W 32] Was_error indication dirty bits clear for VFs 96 to 127. MCP
+ * writes 1 to a bit in this register in order to clear the corresponding
+ * bit in was_error_vf_127_96 register.
+ */
+#define PGLUE_B_REG_WAS_ERROR_VF_127_96_CLR 0x9474
+/* [R 32] Was_error indication dirty bits for VFs 0 to 31. Each bit
+ * indicates that there was a completion with uncorrectable error for the
+ * corresponding VF. Set by PXP. Reset by MCP writing 1 to
+ * was_error_vf_31_0_clr.
+ */
+#define PGLUE_B_REG_WAS_ERROR_VF_31_0 0x906c
+/* [W 32] Was_error indication dirty bits clear for VFs 0 to 31. MCP writes
+ * 1 to a bit in this register in order to clear the corresponding bit in
+ * was_error_vf_31_0 register.
+ */
+#define PGLUE_B_REG_WAS_ERROR_VF_31_0_CLR 0x9478
+/* [R 32] Was_error indication dirty bits for VFs 32 to 63. Each bit
+ * indicates that there was a completion with uncorrectable error for the
+ * corresponding VF. Set by PXP. Reset by MCP writing 1 to
+ * was_error_vf_63_32_clr.
+ */
+#define PGLUE_B_REG_WAS_ERROR_VF_63_32 0x9070
+/* [W 32] Was_error indication dirty bits clear for VFs 32 to 63. MCP writes
+ * 1 to a bit in this register in order to clear the corresponding bit in
+ * was_error_vf_63_32 register.
+ */
+#define PGLUE_B_REG_WAS_ERROR_VF_63_32_CLR 0x947c
+/* [R 32] Was_error indication dirty bits for VFs 64 to 95. Each bit
+ * indicates that there was a completion with uncorrectable error for the
+ * corresponding VF. Set by PXP. Reset by MCP writing 1 to
+ * was_error_vf_95_64_clr.
+ */
+#define PGLUE_B_REG_WAS_ERROR_VF_95_64 0x9074
+/* [W 32] Was_error indication dirty bits clear for VFs 64 to 95. MCP writes
+ * 1 to a bit in this register in order to clear the corresponding bit in
+ * was_error_vf_95_64 register.
+ */
+#define PGLUE_B_REG_WAS_ERROR_VF_95_64_CLR 0x9480
+#define PRS_REG_A_PRSU_20 0x40134
+/* [R 8] debug only: CFC load request current credit. Transaction based. */
+#define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164
+/* [R 8] debug only: CFC search request current credit. Transaction based. */
+#define PRS_REG_CFC_SEARCH_CURRENT_CREDIT 0x40168
+/* [RW 6] The initial credit for the search message to the CFC interface.
+ * Credit is transaction based.
+ */
+#define PRS_REG_CFC_SEARCH_INITIAL_CREDIT 0x4011c
+/* [RW 24] CID for port 0 if no match */
+#define PRS_REG_CID_PORT_0 0x400fc
+/* [RW 1] Indicates if in outer vlan mode. 0=non-outer-vlan mode; 1 = outer
+ * vlan mode.
+ */
+#define PRS_REG_E1HOV_MODE 0x401c8
+/* [R 6] Bit-map indicating which L2 hdrs may appear after the basic
+ * Ethernet header.
+ */
+#define PRS_REG_HDRS_AFTER_BASIC 0x40238
+/* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
+ * Ethernet header for port 0 packets.
+ */
+#define PRS_REG_HDRS_AFTER_BASIC_PORT_0 0x40270
+#define PRS_REG_HDRS_AFTER_BASIC_PORT_1 0x40290
+/* [R 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 */
+#define PRS_REG_HDRS_AFTER_TAG_0 0x40248
+/* [RW 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 for
+ * port 0 packets
+ */
+#define PRS_REG_HDRS_AFTER_TAG_0_PORT_0 0x40280
+#define PRS_REG_HDRS_AFTER_TAG_0_PORT_1 0x402a0
+/* [R 6] Bit-map indicating which headers must appear in the packet */
+#define PRS_REG_MUST_HAVE_HDRS 0x40254
+/* [RW 6] Bit-map indicating which headers must appear in the packet for
+ * port 0 packets
+ */
+#define PRS_REG_MUST_HAVE_HDRS_PORT_0 0x4028c
+#define PRS_REG_MUST_HAVE_HDRS_PORT_1 0x402ac
+#define PRS_REG_NIC_MODE 0x40138
+/* [ST 24] The number of input packets */
+#define PRS_REG_NUM_OF_PACKETS 0x40124
+/* [R 2] debug only: Number of pending requests for CAC on port 0. */
+#define PRS_REG_PENDING_BRB_CAC0_RQ 0x40174
+/* [R 2] debug only: Number of pending requests for header parsing. */
+#define PRS_REG_PENDING_BRB_PRS_RQ 0x40170
+/* [RW 1] Interrupt mask register #0 read/write */
+#define PRS_REG_PRS_INT_MASK 0x40194
+/* [R 1] Interrupt register #0 read */
+#define PRS_REG_PRS_INT_STS 0x40188
+/* [RC 1] Interrupt register #0 read clear */
+#define PRS_REG_PRS_INT_STS_CLR 0x4018c
+/* [RW 8] Parity mask register #0 read/write */
+#define PRS_REG_PRS_PRTY_MASK 0x401a4
+/* [R 8] Parity register #0 read */
+#define PRS_REG_PRS_PRTY_STS 0x40198
+/* [RC 8] Parity register #0 read clear */
+#define PRS_REG_PRS_PRTY_STS_CLR 0x4019c
+/* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this
+ * serail number was released by SDM but cannot be used because a previous
+ * serial number was not released.
+ */
+#define PRS_REG_SERIAL_NUM_STATUS_LSB 0x40154
+/* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this
+ * serail number was released by SDM but cannot be used because a previous
+ * serial number was not released.
+ */
+#define PRS_REG_SERIAL_NUM_STATUS_MSB 0x40158
+/* [R 4] debug only: SRC current credit. Transaction based. */
+#define PRS_REG_SRC_CURRENT_CREDIT 0x4016c
+/* [RW 16] The Ethernet type value for L2 tag 0 */
+#define PRS_REG_TAG_ETHERTYPE_0 0x401d4
+/* [RW 4] The length of the info field for L2 tag 0. The length is between
+ * 2B and 14B; in 2B granularity
+ */
+#define PRS_REG_TAG_LEN_0 0x4022c
+/* [R 8] debug only: TCM current credit. Cycle based. */
+#define PRS_REG_TCM_CURRENT_CREDIT 0x40160
+/* [R 8] debug only: TSDM current credit. Transaction based. */
+#define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c
+/* [RW 16] One of 8 values that should be compared to type in Ethernet
+ * parsing. If there is a match; the field after Ethernet is the first VLAN.
+ * Reset value is 0x8100 which is the standard VLAN type. Note that when
+ * checking second VLAN; type is compared only to 0x8100.
+ */
+#define PRS_REG_VLAN_TYPE_0 0x401a8
+#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT (0x1 << 19)
+#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF (0x1 << 20)
+#define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN (0x1 << 22)
+#define PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED (0x1 << 23)
+#define PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED (0x1 << 24)
+#define PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR (0x1 << 7)
+#define PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR (0x1 << 7)
+/* [R 7] Debug only: Number of used entries in the data FIFO */
+#define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c
+/* [R 7] Debug only: Number of used entries in the header FIFO */
+#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478
+#define PXP2_REG_PGL_ADDR_88_F0 0x120534
+/* [R 32] GRC address for configuration access to PCIE config address 0x88.
+ * any write to this PCIE address will cause a GRC write access to the
+ * address that's in t this register
+ */
+#define PXP2_REG_PGL_ADDR_88_F1 0x120544
+#define PXP2_REG_PGL_ADDR_8C_F0 0x120538
+/* [R 32] GRC address for configuration access to PCIE config address 0x8c.
+ * any write to this PCIE address will cause a GRC write access to the
+ * address that's in t this register
+ */
+#define PXP2_REG_PGL_ADDR_8C_F1 0x120548
+#define PXP2_REG_PGL_ADDR_90_F0 0x12053c
+/* [R 32] GRC address for configuration access to PCIE config address 0x90.
+ * any write to this PCIE address will cause a GRC write access to the
+ * address that's in t this register
+ */
+#define PXP2_REG_PGL_ADDR_90_F1 0x12054c
+#define PXP2_REG_PGL_ADDR_94_F0 0x120540
+/* [R 32] GRC address for configuration access to PCIE config address 0x94.
+ * any write to this PCIE address will cause a GRC write access to the
+ * address that's in t this register
+ */
+#define PXP2_REG_PGL_ADDR_94_F1 0x120550
+/* [RW 32] third dword data of expansion rom request. this register is
+ * special. reading from it provides a vector outstanding read requests. if
+ * a bit is zero it means that a read request on the corresponding tag did
+ * not finish yet (not all completions have arrived for it)
+ */
+#define PXP2_REG_PGL_EXP_ROM2 0x120808
+/* [RW 16] this field allows one function to pretend being another function
+ * when accessing any BAR mapped resource within the device. the value of
+ * the field is the number of the function that will be accessed
+ * effectively. after software write to this bit it must read it in order to
+ * know that the new value is updated. Bits [15] - force. Bits [14] - path
+ * ID. Bits [13:10] - Reserved. Bits [9:4] - VFID. Bits [3] - VF valid. Bits
+ * [2:0] - PFID.
+ */
+#define PXP2_REG_PGL_PRETEND_FUNC_F0 0x120674
+/* [RW 16] this field allows one function to pretend being another function
+ * when accessing any BAR mapped resource within the device. the value of
+ * the field is the number of the function that will be accessed
+ * effectively. after software write to this bit it must read it in order to
+ * know that the new value is updated. Bits [15] - force. Bits [14] - path
+ * ID. Bits [13:10] - Reserved. Bits [9:4] - VFID. Bits [3] - VF valid. Bits
+ * [2:0] - PFID.
+ */
+#define PXP2_REG_PGL_PRETEND_FUNC_F1 0x120678
+/* [R 1] this bit indicates that a read request was blocked because of
+ * bus_master_en was deasserted
+ */
+#define PXP2_REG_PGL_READ_BLOCKED 0x120568
+#define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8
+/* [R 21] debug only */
+#define PXP2_REG_PGL_TXW_CDTS 0x12052c
+/* [R 1] this bit indicates that a write request was blocked because of
+ * bus_master_en was deasserted
+ */
+#define PXP2_REG_PGL_WRITE_BLOCKED 0x120564
+#define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0
+#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
+#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
+#define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4
+#define PXP2_REG_PSWRQ_BW_ADD28 0x120228
+#define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8
+#define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4
+#define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8
+#define PXP2_REG_PSWRQ_BW_ADD8 0x1201dc
+#define PXP2_REG_PSWRQ_BW_ADD9 0x1201e0
+#define PXP2_REG_PSWRQ_BW_CREDIT 0x12032c
+#define PXP2_REG_PSWRQ_BW_L1 0x1202b0
+#define PXP2_REG_PSWRQ_BW_L10 0x1202d4
+#define PXP2_REG_PSWRQ_BW_L11 0x1202d8
+#define PXP2_REG_PSWRQ_BW_L2 0x1202b4
+#define PXP2_REG_PSWRQ_BW_L28 0x120318
+#define PXP2_REG_PSWRQ_BW_L3 0x1202b8
+#define PXP2_REG_PSWRQ_BW_L6 0x1202c4
+#define PXP2_REG_PSWRQ_BW_L7 0x1202c8
+#define PXP2_REG_PSWRQ_BW_L8 0x1202cc
+#define PXP2_REG_PSWRQ_BW_L9 0x1202d0
+#define PXP2_REG_PSWRQ_BW_RD 0x120324
+#define PXP2_REG_PSWRQ_BW_UB1 0x120238
+#define PXP2_REG_PSWRQ_BW_UB10 0x12025c
+#define PXP2_REG_PSWRQ_BW_UB11 0x120260
+#define PXP2_REG_PSWRQ_BW_UB2 0x12023c
+#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
+#define PXP2_REG_PSWRQ_BW_UB3 0x120240
+#define PXP2_REG_PSWRQ_BW_UB6 0x12024c
+#define PXP2_REG_PSWRQ_BW_UB7 0x120250
+#define PXP2_REG_PSWRQ_BW_UB8 0x120254
+#define PXP2_REG_PSWRQ_BW_UB9 0x120258
+#define PXP2_REG_PSWRQ_BW_WR 0x120328
+#define PXP2_REG_PSWRQ_CDU0_L2P 0x120000
+#define PXP2_REG_PSWRQ_QM0_L2P 0x120038
+#define PXP2_REG_PSWRQ_SRC0_L2P 0x120054
+#define PXP2_REG_PSWRQ_TM0_L2P 0x12001c
+#define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0
+/* [RW 32] Interrupt mask register #0 read/write */
+#define PXP2_REG_PXP2_INT_MASK_0 0x120578
+#define PXP2_REG_PXP2_INT_MASK_1 0x120614
+/* [R 32] Interrupt register #0 read */
+#define PXP2_REG_PXP2_INT_STS_0 0x12056c
+#define PXP2_REG_PXP2_INT_STS_1 0x120608
+/* [RC 32] Interrupt register #0 read clear */
+#define PXP2_REG_PXP2_INT_STS_CLR_0 0x120570
+#define PXP2_REG_PXP2_INT_STS_CLR_1 0x12060c
+/* [RW 32] Parity mask register #0 read/write */
+#define PXP2_REG_PXP2_PRTY_MASK_0 0x120588
+#define PXP2_REG_PXP2_PRTY_MASK_1 0x120598
+/* [R 32] Parity register #0 read */
+#define PXP2_REG_PXP2_PRTY_STS_0 0x12057c
+#define PXP2_REG_PXP2_PRTY_STS_1 0x12058c
+/* [RC 32] Parity register #0 read clear */
+#define PXP2_REG_PXP2_PRTY_STS_CLR_0 0x120580
+#define PXP2_REG_PXP2_PRTY_STS_CLR_1 0x120590
+/* [R 1] Debug only: The 'almost full' indication from each fifo (gives
+ * indication about backpressure)
+ */
+#define PXP2_REG_RD_ALMOST_FULL_0 0x120424
+/* [R 8] Debug only: The blocks counter - number of unused block ids */
+#define PXP2_REG_RD_BLK_CNT 0x120418
+/* [RW 8] Debug only: Total number of available blocks in Tetris Buffer.
+ * Must be bigger than 6. Normally should not be changed.
+ */
+#define PXP2_REG_RD_BLK_NUM_CFG 0x12040c
+/* [RW 2] CDU byte swapping mode configuration for master read requests */
+#define PXP2_REG_RD_CDURD_SWAP_MODE 0x120404
+/* [R 29] Details of first request with error on receive side: [15:0] - Echo
+ * ID. [28:16] - sub-request length plus start_offset_2_0 minus 1.
+ */
+#define PXP2_REG_RD_CPL_ERR_DETAILS 0x120778
+/* [R 10] Details of first request with error on receive side: [4:0] - VQ
+ * ID. [8:5] - client ID. [9] - valid - indicates if there was a completion
+ * error since the last time this register was read.
+ */
+#define PXP2_REG_RD_CPL_ERR_DETAILS2 0x12077c
+/* [RW 1] When '1'; inputs to the PSWRD block are ignored */
+#define PXP2_REG_RD_DISABLE_INPUTS 0x120374
+/* [R 1] PSWRD internal memories initialization is done */
+#define PXP2_REG_RD_INIT_DONE 0x120370
+/* [R 1] Debug only: Indication if delivery ports are idle */
+#define PXP2_REG_RD_PORT_IS_IDLE_0 0x12041c
+#define PXP2_REG_RD_PORT_IS_IDLE_1 0x120420
+/* [RW 2] QM byte swapping mode configuration for master read requests */
+#define PXP2_REG_RD_QM_SWAP_MODE 0x1203f8
+/* [RW 2] SRC byte swapping mode configuration for master read requests */
+#define PXP2_REG_RD_SRC_SWAP_MODE 0x120400
+/* [R 7] Debug only: The SR counter - number of unused sub request ids */
+#define PXP2_REG_RD_SR_CNT 0x120414
+/* [RW 7] Debug only: Total number of available PCI read sub-requests. Must
+ * be bigger than 1. Normally should not be changed.
+ */
+#define PXP2_REG_RD_SR_NUM_CFG 0x120408
+/* [RW 1] Signals the PSWRD block to start initializing internal memories */
+#define PXP2_REG_RD_START_INIT 0x12036c
+/* [RW 2] TM byte swapping mode configuration for master read requests */
+#define PXP2_REG_RD_TM_SWAP_MODE 0x1203fc
+/* [RW 10] Bandwidth addition to VQ0 write requests */
+#define PXP2_REG_RQ_BW_RD_ADD0 0x1201bc
+/* [RW 10] Bandwidth addition to VQ12 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD12 0x1201ec
+/* [RW 10] Bandwidth addition to VQ13 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD13 0x1201f0
+/* [RW 10] Bandwidth addition to VQ14 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD14 0x1201f4
+/* [RW 10] Bandwidth addition to VQ15 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD15 0x1201f8
+/* [RW 10] Bandwidth addition to VQ16 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD16 0x1201fc
+/* [RW 10] Bandwidth addition to VQ17 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD17 0x120200
+/* [RW 10] Bandwidth addition to VQ18 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD18 0x120204
+/* [RW 10] Bandwidth addition to VQ19 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD19 0x120208
+/* [RW 10] Bandwidth addition to VQ20 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD20 0x12020c
+/* [RW 10] Bandwidth addition to VQ22 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD22 0x120210
+/* [RW 10] Bandwidth addition to VQ23 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD23 0x120214
+/* [RW 10] Bandwidth addition to VQ24 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD24 0x120218
+/* [RW 10] Bandwidth addition to VQ25 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD25 0x12021c
+/* [RW 10] Bandwidth addition to VQ26 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD26 0x120220
+/* [RW 10] Bandwidth addition to VQ27 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD27 0x120224
+/* [RW 10] Bandwidth addition to VQ4 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD4 0x1201cc
+/* [RW 10] Bandwidth addition to VQ5 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD5 0x1201d0
+/* [RW 10] Bandwidth Typical L for VQ0 Read requests */
+#define PXP2_REG_RQ_BW_RD_L0 0x1202ac
+/* [RW 10] Bandwidth Typical L for VQ12 Read requests */
+#define PXP2_REG_RQ_BW_RD_L12 0x1202dc
+/* [RW 10] Bandwidth Typical L for VQ13 Read requests */
+#define PXP2_REG_RQ_BW_RD_L13 0x1202e0
+/* [RW 10] Bandwidth Typical L for VQ14 Read requests */
+#define PXP2_REG_RQ_BW_RD_L14 0x1202e4
+/* [RW 10] Bandwidth Typical L for VQ15 Read requests */
+#define PXP2_REG_RQ_BW_RD_L15 0x1202e8
+/* [RW 10] Bandwidth Typical L for VQ16 Read requests */
+#define PXP2_REG_RQ_BW_RD_L16 0x1202ec
+/* [RW 10] Bandwidth Typical L for VQ17 Read requests */
+#define PXP2_REG_RQ_BW_RD_L17 0x1202f0
+/* [RW 10] Bandwidth Typical L for VQ18 Read requests */
+#define PXP2_REG_RQ_BW_RD_L18 0x1202f4
+/* [RW 10] Bandwidth Typical L for VQ19 Read requests */
+#define PXP2_REG_RQ_BW_RD_L19 0x1202f8
+/* [RW 10] Bandwidth Typical L for VQ20 Read requests */
+#define PXP2_REG_RQ_BW_RD_L20 0x1202fc
+/* [RW 10] Bandwidth Typical L for VQ22 Read requests */
+#define PXP2_REG_RQ_BW_RD_L22 0x120300
+/* [RW 10] Bandwidth Typical L for VQ23 Read requests */
+#define PXP2_REG_RQ_BW_RD_L23 0x120304
+/* [RW 10] Bandwidth Typical L for VQ24 Read requests */
+#define PXP2_REG_RQ_BW_RD_L24 0x120308
+/* [RW 10] Bandwidth Typical L for VQ25 Read requests */
+#define PXP2_REG_RQ_BW_RD_L25 0x12030c
+/* [RW 10] Bandwidth Typical L for VQ26 Read requests */
+#define PXP2_REG_RQ_BW_RD_L26 0x120310
+/* [RW 10] Bandwidth Typical L for VQ27 Read requests */
+#define PXP2_REG_RQ_BW_RD_L27 0x120314
+/* [RW 10] Bandwidth Typical L for VQ4 Read requests */
+#define PXP2_REG_RQ_BW_RD_L4 0x1202bc
+/* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */
+#define PXP2_REG_RQ_BW_RD_L5 0x1202c0
+/* [RW 7] Bandwidth upper bound for VQ0 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND0 0x120234
+/* [RW 7] Bandwidth upper bound for VQ12 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND12 0x120264
+/* [RW 7] Bandwidth upper bound for VQ13 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND13 0x120268
+/* [RW 7] Bandwidth upper bound for VQ14 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND14 0x12026c
+/* [RW 7] Bandwidth upper bound for VQ15 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND15 0x120270
+/* [RW 7] Bandwidth upper bound for VQ16 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND16 0x120274
+/* [RW 7] Bandwidth upper bound for VQ17 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND17 0x120278
+/* [RW 7] Bandwidth upper bound for VQ18 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND18 0x12027c
+/* [RW 7] Bandwidth upper bound for VQ19 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND19 0x120280
+/* [RW 7] Bandwidth upper bound for VQ20 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND20 0x120284
+/* [RW 7] Bandwidth upper bound for VQ22 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND22 0x120288
+/* [RW 7] Bandwidth upper bound for VQ23 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND23 0x12028c
+/* [RW 7] Bandwidth upper bound for VQ24 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND24 0x120290
+/* [RW 7] Bandwidth upper bound for VQ25 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND25 0x120294
+/* [RW 7] Bandwidth upper bound for VQ26 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND26 0x120298
+/* [RW 7] Bandwidth upper bound for VQ27 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND27 0x12029c
+/* [RW 7] Bandwidth upper bound for VQ4 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND4 0x120244
+/* [RW 7] Bandwidth upper bound for VQ5 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND5 0x120248
+/* [RW 10] Bandwidth addition to VQ29 write requests */
+#define PXP2_REG_RQ_BW_WR_ADD29 0x12022c
+/* [RW 10] Bandwidth addition to VQ30 write requests */
+#define PXP2_REG_RQ_BW_WR_ADD30 0x120230
+/* [RW 10] Bandwidth Typical L for VQ29 Write requests */
+#define PXP2_REG_RQ_BW_WR_L29 0x12031c
+/* [RW 10] Bandwidth Typical L for VQ30 Write requests */
+#define PXP2_REG_RQ_BW_WR_L30 0x120320
+/* [RW 7] Bandwidth upper bound for VQ29 */
+#define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4
+/* [RW 7] Bandwidth upper bound for VQ30 */
+#define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8
+/* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */
+#define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008
+/* [RW 2] Endian mode for cdu */
+#define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0
+#define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c
+#define PXP2_REG_RQ_CDU_LAST_ILT 0x120620
+/* [RW 4] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k;
+ * -128k; -256k; -512k; -1M; -2M; 0-4M
+ */
+#define PXP2_REG_RQ_CDU_P_SIZE 0x120018
+/* [R 1] 1' indicates that the requester has finished its internal
+ * configuration
+ */
+#define PXP2_REG_RQ_CFG_DONE 0x1201b4
+/* [RW 2] Endian mode for debug */
+#define PXP2_REG_RQ_DBG_ENDIAN_M 0x1201a4
+/* [RW 1] When '1'; requests will enter input buffers but wont get out
+ * towards the glue
+ */
+#define PXP2_REG_RQ_DISABLE_INPUTS 0x120330
+/* [RW 4] Determines alignment of write SRs when a request is split into
+ * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B
+ * aligned. 4 - 512B aligned.
+ */
+#define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0
+/* [RW 4] Determines alignment of read SRs when a request is split into
+ * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B
+ * aligned. 4 - 512B aligned.
+ */
+#define PXP2_REG_RQ_DRAM_ALIGN_RD 0x12092c
+/* [RW 1] when set the new alignment method (E2) will be applied; when reset
+ * the original alignment method (E1 E1H) will be applied
+ */
+#define PXP2_REG_RQ_DRAM_ALIGN_SEL 0x120930
+/* [R 32] Status signals in pswrq_garb module */
+#define PXP2_REG_RQ_GARB 0x120748
+/* [RW 2] Endian mode for hc */
+#define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8
+/* [WB 53] Onchip address table */
+#define PXP2_REG_RQ_ONCHIP_AT 0x122000
+/* [WB 53] Onchip address table - B0 */
+#define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000
+/* [RW 13] Pending read limiter threshold; in Dwords */
+#define PXP2_REG_RQ_PDR_LIMIT 0x12033c
+/* [RW 2] Endian mode for qm */
+#define PXP2_REG_RQ_QM_ENDIAN_M 0x120194
+#define PXP2_REG_RQ_QM_FIRST_ILT 0x120634
+#define PXP2_REG_RQ_QM_LAST_ILT 0x120638
+/* [RW 4] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
+ * -128k; -256k; -512k; -1M; -2M; 0-4M
+ */
+#define PXP2_REG_RQ_QM_P_SIZE 0x120050
+/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
+#define PXP2_REG_RQ_RBC_DONE 0x1201b0
+/* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
+ * 001:256B; 010: 512B; 11:1K:100:2K; 01:4K
+ */
+#define PXP2_REG_RQ_RD_MBS0 0x120160
+/* [RW 3] Max burst size filed for read requests port 1; 000 - 128B;
+ * 001:256B; 010: 512B; 11:1K:100:2K; 01:4K
+ */
+#define PXP2_REG_RQ_RD_MBS1 0x120168
+/* [RW 2] Endian mode for src */
+#define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c
+#define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c
+#define PXP2_REG_RQ_SRC_LAST_ILT 0x120640
+/* [RW 4] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
+ * -128k; -256k; -512k; -1M; -2M; 0-4M
+ */
+#define PXP2_REG_RQ_SRC_P_SIZE 0x12006c
+/* [RW 2] Endian mode for tm */
+#define PXP2_REG_RQ_TM_ENDIAN_M 0x120198
+#define PXP2_REG_RQ_TM_FIRST_ILT 0x120644
+#define PXP2_REG_RQ_TM_LAST_ILT 0x120648
+/* [RW 4] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k;
+ * -128k; -256k; -512k; -1M; -2M; 0-4M
+ */
+#define PXP2_REG_RQ_TM_P_SIZE 0x120034
+/* [R 5] Number of entries in the ufifo; his fifo has l2p completions */
+#define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c
+/* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */
+#define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094
+/* [R 8] Number of entries occupied by vq 0 in pswrq memory */
+#define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810
+/* [R 8] Number of entries occupied by vq 10 in pswrq memory */
+#define PXP2_REG_RQ_VQ10_ENTRY_CNT 0x120818
+/* [R 8] Number of entries occupied by vq 11 in pswrq memory */
+#define PXP2_REG_RQ_VQ11_ENTRY_CNT 0x120820
+/* [R 8] Number of entries occupied by vq 12 in pswrq memory */
+#define PXP2_REG_RQ_VQ12_ENTRY_CNT 0x120828
+/* [R 8] Number of entries occupied by vq 13 in pswrq memory */
+#define PXP2_REG_RQ_VQ13_ENTRY_CNT 0x120830
+/* [R 8] Number of entries occupied by vq 14 in pswrq memory */
+#define PXP2_REG_RQ_VQ14_ENTRY_CNT 0x120838
+/* [R 8] Number of entries occupied by vq 15 in pswrq memory */
+#define PXP2_REG_RQ_VQ15_ENTRY_CNT 0x120840
+/* [R 8] Number of entries occupied by vq 16 in pswrq memory */
+#define PXP2_REG_RQ_VQ16_ENTRY_CNT 0x120848
+/* [R 8] Number of entries occupied by vq 17 in pswrq memory */
+#define PXP2_REG_RQ_VQ17_ENTRY_CNT 0x120850
+/* [R 8] Number of entries occupied by vq 18 in pswrq memory */
+#define PXP2_REG_RQ_VQ18_ENTRY_CNT 0x120858
+/* [R 8] Number of entries occupied by vq 19 in pswrq memory */
+#define PXP2_REG_RQ_VQ19_ENTRY_CNT 0x120860
+/* [R 8] Number of entries occupied by vq 1 in pswrq memory */
+#define PXP2_REG_RQ_VQ1_ENTRY_CNT 0x120868
+/* [R 8] Number of entries occupied by vq 20 in pswrq memory */
+#define PXP2_REG_RQ_VQ20_ENTRY_CNT 0x120870
+/* [R 8] Number of entries occupied by vq 21 in pswrq memory */
+#define PXP2_REG_RQ_VQ21_ENTRY_CNT 0x120878
+/* [R 8] Number of entries occupied by vq 22 in pswrq memory */
+#define PXP2_REG_RQ_VQ22_ENTRY_CNT 0x120880
+/* [R 8] Number of entries occupied by vq 23 in pswrq memory */
+#define PXP2_REG_RQ_VQ23_ENTRY_CNT 0x120888
+/* [R 8] Number of entries occupied by vq 24 in pswrq memory */
+#define PXP2_REG_RQ_VQ24_ENTRY_CNT 0x120890
+/* [R 8] Number of entries occupied by vq 25 in pswrq memory */
+#define PXP2_REG_RQ_VQ25_ENTRY_CNT 0x120898
+/* [R 8] Number of entries occupied by vq 26 in pswrq memory */
+#define PXP2_REG_RQ_VQ26_ENTRY_CNT 0x1208a0
+/* [R 8] Number of entries occupied by vq 27 in pswrq memory */
+#define PXP2_REG_RQ_VQ27_ENTRY_CNT 0x1208a8
+/* [R 8] Number of entries occupied by vq 28 in pswrq memory */
+#define PXP2_REG_RQ_VQ28_ENTRY_CNT 0x1208b0
+/* [R 8] Number of entries occupied by vq 29 in pswrq memory */
+#define PXP2_REG_RQ_VQ29_ENTRY_CNT 0x1208b8
+/* [R 8] Number of entries occupied by vq 2 in pswrq memory */
+#define PXP2_REG_RQ_VQ2_ENTRY_CNT 0x1208c0
+/* [R 8] Number of entries occupied by vq 30 in pswrq memory */
+#define PXP2_REG_RQ_VQ30_ENTRY_CNT 0x1208c8
+/* [R 8] Number of entries occupied by vq 31 in pswrq memory */
+#define PXP2_REG_RQ_VQ31_ENTRY_CNT 0x1208d0
+/* [R 8] Number of entries occupied by vq 3 in pswrq memory */
+#define PXP2_REG_RQ_VQ3_ENTRY_CNT 0x1208d8
+/* [R 8] Number of entries occupied by vq 4 in pswrq memory */
+#define PXP2_REG_RQ_VQ4_ENTRY_CNT 0x1208e0
+/* [R 8] Number of entries occupied by vq 5 in pswrq memory */
+#define PXP2_REG_RQ_VQ5_ENTRY_CNT 0x1208e8
+/* [R 8] Number of entries occupied by vq 6 in pswrq memory */
+#define PXP2_REG_RQ_VQ6_ENTRY_CNT 0x1208f0
+/* [R 8] Number of entries occupied by vq 7 in pswrq memory */
+#define PXP2_REG_RQ_VQ7_ENTRY_CNT 0x1208f8
+/* [R 8] Number of entries occupied by vq 8 in pswrq memory */
+#define PXP2_REG_RQ_VQ8_ENTRY_CNT 0x120900
+/* [R 8] Number of entries occupied by vq 9 in pswrq memory */
+#define PXP2_REG_RQ_VQ9_ENTRY_CNT 0x120908
+/* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
+ * 001:256B; 010: 512B;
+ */
+#define PXP2_REG_RQ_WR_MBS0 0x12015c
+/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
+ * 001:256B; 010: 512B;
+ */
+#define PXP2_REG_RQ_WR_MBS1 0x120164
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ * buffer reaches this number has_payload will be asserted. 1024B is not a
+ * real MPS; it is a way of indicating that the client needs to wait for EOP
+ * before asserting has_payload. Register should be initialized according to
+ * has_payload value.
+ */
+#define PXP2_REG_WR_CDU_MPS 0x1205f0
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ * buffer reaches this number has_payload will be asserted. 1024B is not a
+ * real MPS; it is a way of indicating that the client needs to wait for EOP
+ * before asserting has_payload. Register should be initialized according to
+ * has_payload value.
+ */
+#define PXP2_REG_WR_CSDM_MPS 0x1205d0
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ * buffer reaches this number has_payload will be asserted. 1024B is not a
+ * real MPS; it is a way of indicating that the client needs to wait for EOP
+ * before asserting has_payload. Register should be initialized according to
+ * has_payload value.
+ */
+#define PXP2_REG_WR_DBG_MPS 0x1205e8
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ * buffer reaches this number has_payload will be asserted. 1024B is not a
+ * real MPS; it is a way of indicating that the client needs to wait for EOP
+ * before asserting has_payload. Register should be initialized according to
+ * has_payload value.
+ */
+#define PXP2_REG_WR_DMAE_MPS 0x1205ec
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ * buffer reaches this number has_payload will be asserted. 1024B is not a
+ * real MPS; it is a way of indicating that the client needs to wait for EOP
+ * before asserting has_payload. Register should be initialized according to
+ * has_payload value.
+ */
+#define PXP2_REG_WR_HC_MPS 0x1205c8
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ * buffer reaches this number has_payload will be asserted. 1024B is not a
+ * real MPS; it is a way of indicating that the client needs to wait for EOP
+ * before asserting has_payload. Register should be initialized according to
+ * has_payload value.
+ */
+#define PXP2_REG_WR_QM_MPS 0x1205dc
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ * buffer reaches this number has_payload will be asserted. 1024B is not a
+ * real MPS; it is a way of indicating that the client needs to wait for EOP
+ * before asserting has_payload. Register should be initialized according to
+ * has_payload value.
+ */
+#define PXP2_REG_WR_SRC_MPS 0x1205e4
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ * buffer reaches this number has_payload will be asserted. 1024B is not a
+ * real MPS; it is a way of indicating that the client needs to wait for EOP
+ * before asserting has_payload. Register should be initialized according to
+ * has_payload value.
+ */
+#define PXP2_REG_WR_TM_MPS 0x1205e0
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ * buffer reaches this number has_payload will be asserted. 1024B is not a
+ * real MPS; it is a way of indicating that the client needs to wait for EOP
+ * before asserting has_payload. Register should be initialized according to
+ * has_payload value.
+ */
+#define PXP2_REG_WR_TSDM_MPS 0x1205d4
+/* [RW 9] a. When pxp2.wr_th_mode_usdmdp = 0 (E1.5-65 mode) should be
+ * initialized to (MPS/32); b. When pxp2.wr_th_mode_usdmdp = 1 (E1.5-90;
+ * enhanced mode) and pxp2.wr_usdmdp_outst_req is different than default (3)
+ * should be initialized to (pxp2.wr_usdmdp_outst_req x MPS/32); when
+ * pxp2.wr_usdmdp_outst_req is 3 the reset value is the correct
+ * configuration
+ */
+#define PXP2_REG_WR_USDMDP_TH 0x120348
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ * buffer reaches this number has_payload will be asserted. 1024B is not a
+ * real MPS; it is a way of indicating that the client needs to wait for EOP
+ * before asserting has_payload. Register should be initialized according to
+ * has_payload value.
+ */
+#define PXP2_REG_WR_USDM_MPS 0x1205cc
+/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
+ * buffer reaches this number has_payload will be asserted. 1024B is not a
+ * real MPS; it is a way of indicating that the client needs to wait for EOP
+ * before asserting has_payload. Register should be initialized according to
+ * has_payload value.
+ */
+#define PXP2_REG_WR_XSDM_MPS 0x1205d8
+/* [R 1] debug only: Indication if PSWHST arbiter is idle */
+#define PXP_REG_HST_ARB_IS_IDLE 0x103004
+/* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
+ * this client is waiting for the arbiter.
+ */
+#define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008
+/* [RW 1] When 1; doorbells are discarded and not passed to doorbell queue
+ * block. Should be used for close the gates.
+ */
+#define PXP_REG_HST_DISCARD_DOORBELLS 0x1030a4
+/* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit
+ * should update according to 'hst_discard_doorbells' register when the state
+ * machine is idle
+ */
+#define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0
+/* [RW 1] When 1; new internal writes arriving to the block are discarded.
+ * Should be used for close the gates.
+ */
+#define PXP_REG_HST_DISCARD_INTERNAL_WRITES 0x1030a8
+/* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1'
+ * means this PSWHST is discarding inputs from this client. Each bit should
+ * update according to 'hst_discard_internal_writes' register when the state
+ * machine is idle.
+ */
+#define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c
+/* [R 1] 1 - An incorrect access is logged. The valid bit is reset when the
+ * relevant interrupt register is read (PXP_REG_INT_STS_CLR_1)
+ */
+#define PXP_REG_HST_INCORRECT_ACCESS_VALID 0x1030cc
+/* [R 1] 1- permission violation data is logged. The valid bit is reset when
+ * the relevant interrupt register is read (PXP_REG_INT_STS_CLR_1)
+ */
+#define PXP_REG_HST_PER_VIOLATION_VALID 0x1030e0
+/* [R 15] The FID of the first access to a disabled VF; the format is
+ * [14:12] - pfid; [11:6] - vfid; [5] - vf_valid; [4:1] - client (0 USDM; 1
+ * CSDM; 2 XSDM; 3 TSDM; 4 HC; 5 GRC; 6 DQ; 7 RESERVED SPACE; 8 ATC); [0] -
+ * w_nr(0-read req; 1- write req). The data is written only when the valid
+ * bit is reset. and it is stays stable until it is reset by the read from
+ * interrupt_clr register
+ */
+#define PXP_REG_HST_VF_DISABLED_ERROR_DATA 0x1030b8
+/* [R 1] 1 - An error request is logged and wasn't handled yet. The valid
+ * bit is reset when the relevant interrupt register is read
+ * (PXP_REG_INT_STS_CLR_1)
+ */
+#define PXP_REG_HST_VF_DISABLED_ERROR_VALID 0x1030bc
+/* [RW 7] Indirect access to the permission table. The fields are : {Valid;
+ * VFID[5:0]}
+ */
+#define PXP_REG_HST_ZONE_PERMISSION_TABLE 0x103400
+/* [RW 32] Interrupt mask register #0 read/write */
+#define PXP_REG_PXP_INT_MASK_0 0x103074
+#define PXP_REG_PXP_INT_MASK_1 0x103084
+/* [R 32] Interrupt register #0 read */
+#define PXP_REG_PXP_INT_STS_0 0x103068
+#define PXP_REG_PXP_INT_STS_1 0x103078
+/* [RC 32] Interrupt register #0 read clear */
+#define PXP_REG_PXP_INT_STS_CLR_0 0x10306c
+#define PXP_REG_PXP_INT_STS_CLR_1 0x10307c
+/* [RW 27] Parity mask register #0 read/write */
+#define PXP_REG_PXP_PRTY_MASK 0x103094
+/* [R 27] Parity register #0 read */
+#define PXP_REG_PXP_PRTY_STS 0x103088
+/* [RC 27] Parity register #0 read clear */
+#define PXP_REG_PXP_PRTY_STS_CLR 0x10308c
+/* [RW 32] The base logical address (in bytes) of each physical queue. The
+ * index I represents the physical queue number. The 12 lsbs are ignore and
+ * considered zero so practically there are only 20 bits in this register;
+ * queues 63-0
+ */
+#define QM_REG_BASEADDR 0x168900
+/* [R 32] NOT USED */
+#define QM_REG_BASEADDR_EXT_A 0x16e100
+/* [R 18] The credit value for byte credit 0. The value is 2s complement
+ * value (i.e. msb is used for the sign).
+ */
+#define QM_REG_BYTECRD0 0x16e6fc
+/* [R 18] The credit value for byte credit 1. The value is 2s complement
+ * value (i.e. msb is used for the sign).
+ */
+#define QM_REG_BYTECRD1 0x16e700
+/* [R 18] The credit value for byte credit 2. The value is 2s complement
+ * value (i.e. msb is used for the sign).
+ */
+#define QM_REG_BYTECRD2 0x16e704
+/* [R 18] The credit value for byte credit 3. The value is 2s complement
+ * value (i.e. msb is used for the sign).
+ */
+#define QM_REG_BYTECRD3 0x16e7ac
+/* [R 18] The credit value for byte credit 4. The value is 2s complement
+ * value (i.e. msb is used for the sign).
+ */
+#define QM_REG_BYTECRD4 0x16e7b0
+/* [R 18] The credit value for byte credit 5. The value is 2s complement
+ * value (i.e. msb is used for the sign).
+ */
+#define QM_REG_BYTECRD5 0x16e7b4
+/* [R 18] The credit value for byte credit 6. The value is 2s complement
+ * value (i.e. msb is used for the sign).
+ */
+#define QM_REG_BYTECRD6 0x16e7b8
+/* [R 32] NOT USED - removed for E3 B0 */
+#define QM_REG_BYTECRDCMDQ_0 0x16e6e8
+/* [RC 32] byte credit update error register; b2-b0: byte credit id (pbf
+ * error); b3 - reserved (zero filled); b6-b4: byte credit id (storm
+ * increment error); b7 - reserved (zero filled); b10-b8: byte credit id
+ * (storm decrement error); b11 - reserved (zero filled); b12: pbf error
+ * valid; b13: storm increment error valid; b14: storm decrement error
+ * valid; b15: reserved; b22-b16: byte credit warning (warning = decremented
+ * below zero). mask bit per voq counter; b31-b23: reserved; NOTE: VOQ id-s
+ * represent HW
+ */
+#define QM_REG_BYTECRDERRREG 0x16e708
+/* [RW 17] The initial byte credit value for all counters */
+#define QM_REG_BYTECRDINITVAL 0x168238
+/* [RW 20] The number of connections divided by 16 which dictates the size
+ * of each queue which belongs to even function number.
+ */
+#define QM_REG_CONNNUM_0 0x168020
+/* [R 6] Keep the fill level of the fifo from write client 4 */
+#define QM_REG_CQM_WRC_FIFOLVL 0x168018
+/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
+ * FW (virtual) VOQ0
+ */
+#define QM_REG_FWVOQ0TOHWVOQ 0x16e7bc
+/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
+ * FW (virtual) VOQ1
+ */
+#define QM_REG_FWVOQ1TOHWVOQ 0x16e7c0
+/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
+ * FW (virtual) VOQ2
+ */
+#define QM_REG_FWVOQ2TOHWVOQ 0x16e7c4
+/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
+ * FW (virtual) VOQ3
+ */
+#define QM_REG_FWVOQ3TOHWVOQ 0x16e7c8
+/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
+ * FW (virtual) VOQ4
+ */
+#define QM_REG_FWVOQ4TOHWVOQ 0x16e7cc
+/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
+ * FW (virtual) VOQ5
+ */
+#define QM_REG_FWVOQ5TOHWVOQ 0x16e7d0
+/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
+ * FW (virtual) VOQ6
+ */
+#define QM_REG_FWVOQ6TOHWVOQ 0x16e7d4
+/* [RW 3] Describes the HW (real) VOQ id (id-s 0-6 used for HW TX VOQ-s) of
+ * FW (virtual) VOQ7
+ */
+#define QM_REG_FWVOQ7TOHWVOQ 0x16e7d8
+/* [RC 1] A flag to indicate that overflow error occurred in one of the
+ * queues.
+ */
+#define QM_REG_OVFERROR 0x16805c
+/* [RC 6] the Q were the overflow occurs */
+#define QM_REG_OVFQNUM 0x168058
+/* [R 16] Pause state for physical queues 15-0 */
+#define QM_REG_PAUSESTATE0 0x168410
+/* [R 16] Pause state for physical queues 31-16 */
+#define QM_REG_PAUSESTATE1 0x168414
+/* [R 16] Pause state for physical queues 47-32 */
+#define QM_REG_PAUSESTATE2 0x16e684
+/* [R 16] Pause state for physical queues 63-48 */
+#define QM_REG_PAUSESTATE3 0x16e688
+/* [R 16] NOT USED */
+#define QM_REG_PAUSESTATE4 0x16e68c
+/* [R 16] NOT USED */
+#define QM_REG_PAUSESTATE5 0x16e690
+/* [R 16] NOT USED */
+#define QM_REG_PAUSESTATE6 0x16e694
+/* [R 16] NOT USED */
+#define QM_REG_PAUSESTATE7 0x16e698
+#define QM_REG_PF_EN 0x16e70c
+/* [R 24] The number of tasks stored in the QM for the PF. only even
+ * functions are valid in E2 (odd I registers will be hard wired to 0)
+ */
+#define QM_REG_PF_USG_CNT_0 0x16e040
+/* [R 16] NOT USED */
+#define QM_REG_PORT0BYTECRD 0x168300
+/* [R 16] NOT USED */
+#define QM_REG_PORT1BYTECRD 0x168304
+/* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow:
+ * ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
+ * bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank;
+ */
+#define QM_REG_PTRTBL 0x168a00
+/* [R 54] NOT USED */
+#define QM_REG_PTRTBL_EXT_A 0x16e200
+/* [RW 14] Interrupt mask register #0 read/write */
+#define QM_REG_QM_INT_MASK 0x168444
+/* [R 14] Interrupt register #0 read */
+#define QM_REG_QM_INT_STS 0x168438
+/* [RC 14] Interrupt register #0 read clear */
+#define QM_REG_QM_INT_STS_CLR 0x16843c
+/* [RW 12] Parity mask register #0 read/write */
+#define QM_REG_QM_PRTY_MASK 0x168454
+/* [R 12] Parity register #0 read */
+#define QM_REG_QM_PRTY_STS 0x168448
+/* [RC 12] Parity register #0 read clear */
+#define QM_REG_QM_PRTY_STS_CLR 0x16844c
+/* [R 32] Current queues in pipeline: Queues from 32 to 63 */
+#define QM_REG_QSTATUS_HIGH 0x16802c
+/* [R 32] NOT USED */
+#define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408
+/* [R 32] Current queues in pipeline: Queues from 0 to 31 */
+#define QM_REG_QSTATUS_LOW 0x168028
+/* [R 32] NOT USED */
+#define QM_REG_QSTATUS_LOW_EXT_A 0x16e404
+/* [R 24] The number of tasks queued for each queue; queues 63-0 */
+#define QM_REG_QTASKCTR_0 0x168308
+/* [R 24] NOT USED */
+#define QM_REG_QTASKCTR_EXT_A_0 0x16e584
+/* [RW 4] Queue tied to VOQ */
+#define QM_REG_QVOQIDX_0 0x1680f4
+/* [RW 1] Initialization bit command */
+#define QM_REG_SOFT_RESET 0x168428
+/* [R 6] Keep the fill level of the fifo from write client 3 */
+#define QM_REG_TQM_WRC_FIFOLVL 0x168010
+/* [R 6] Keep the fill level of the fifo from write client 2 */
+#define QM_REG_UQM_WRC_FIFOLVL 0x168008
+/* [RC 32] VOQ credit update error register; b3-b0: voq id (pbf error);
+ * b7-b4: voq id (storm increment error); b11-b8: voq id (storm decrement
+ * error); b12: pbf error valid; b13: storm increment error valid; b14:
+ * storm decrement error valid; b15: reserved; b27-b16: voq warning
+ * (warning = decremented below zero). mask bit per voq counter; b31-b28:
+ * reserved; NOTE: VOQ id-s represent HW VOQ id
+ */
+#define QM_REG_VOQCRDERRREG 0x168408
+/* [R 17] The credit value for each VOQ. The value is 2s complement value
+ * (i.e. msb is used for the sign).
+ */
+#define QM_REG_VOQCREDIT_0 0x1682d0
+#define QM_REG_VOQCREDIT_1 0x1682d4
+#define QM_REG_VOQCREDIT_2 0x1682d8
+#define QM_REG_VOQCREDIT_3 0x1682dc
+#define QM_REG_VOQCREDIT_4 0x1682e0
+#define QM_REG_VOQCREDIT_5 0x1682e4
+#define QM_REG_VOQCREDIT_6 0x1682e8
+/* [RW 16] The init and maximum credit for each VoQ */
+#define QM_REG_VOQINITCREDIT_0 0x168060
+#define QM_REG_VOQINITCREDIT_1 0x168064
+#define QM_REG_VOQINITCREDIT_2 0x168068
+#define QM_REG_VOQINITCREDIT_3 0x16806c
+#define QM_REG_VOQINITCREDIT_4 0x168070
+#define QM_REG_VOQINITCREDIT_5 0x168074
+#define QM_REG_VOQINITCREDIT_6 0x168078
+/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
+#define QM_REG_VOQQMASK_0_LSB 0x168240
+/* [R 6] Keep the fill level of the fifo from write client 1 */
+#define QM_REG_XQM_WRC_FIFOLVL 0x168000
+/* [W 1] reset to parity interrupt */
+#define SEM_FAST_REG_PARITY_RST 0x18840
+/* [RW 1] Interrupt mask register #0 read/write */
+#define SEM_FAST_REG_SEM_FAST_INT_MASK 0x1fff0
+/* [R 1] Interrupt register #0 read */
+#define SEM_FAST_REG_SEM_FAST_INT_STS 0x1fffc
+/* [RC 1] Interrupt register #0 read clear */
+#define SEM_FAST_REG_SEM_FAST_INT_STS_CLR 0x1fff8
+/* [RW 1] Parity mask register #0 read/write */
+#define SEM_FAST_REG_SEM_FAST_PRTY_MASK 0x1ffe0
+/* [R 1] Parity register #0 read */
+#define SEM_FAST_REG_SEM_FAST_PRTY_STS 0x1ffec
+/* [RC 1] Parity register #0 read clear */
+#define SEM_FAST_REG_SEM_FAST_PRTY_STS_CLR 0x1ffe8
+#define SRC_REG_COUNTFREE0 0x40500
+#define SRC_REG_FIRSTFREE0 0x40510
+#define SRC_REG_KEYRSS0_0 0x40408
+#define SRC_REG_KEYRSS0_7 0x40424
+#define SRC_REG_KEYSEARCH_0 0x40458
+#define SRC_REG_KEYSEARCH_1 0x4045c
+#define SRC_REG_KEYSEARCH_2 0x40460
+#define SRC_REG_KEYSEARCH_3 0x40464
+#define SRC_REG_KEYSEARCH_4 0x40468
+#define SRC_REG_KEYSEARCH_5 0x4046c
+#define SRC_REG_KEYSEARCH_6 0x40470
+#define SRC_REG_KEYSEARCH_7 0x40474
+#define SRC_REG_KEYSEARCH_8 0x40478
+#define SRC_REG_KEYSEARCH_9 0x4047c
+#define SRC_REG_LASTFREE0 0x40530
+#define SRC_REG_NUMBER_HASH_BITS0 0x40400
+/* [RW 1] Reset internal state machines. */
+#define SRC_REG_SOFT_RST 0x4049c
+/* [RW 3] Interrupt mask register #0 read/write */
+#define SRC_REG_SRC_INT_MASK 0x404b8
+/* [R 3] Interrupt register #0 read */
+#define SRC_REG_SRC_INT_STS 0x404ac
+/* [RC 3] Interrupt register #0 read clear */
+#define SRC_REG_SRC_INT_STS_CLR 0x404b0
+/* [RW 3] Parity mask register #0 read/write */
+#define SRC_REG_SRC_PRTY_MASK 0x404c8
+/* [R 3] Parity register #0 read */
+#define SRC_REG_SRC_PRTY_STS 0x404bc
+/* [RC 3] Parity register #0 read clear */
+#define SRC_REG_SRC_PRTY_STS_CLR 0x404c0
+/* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
+#define TCM_REG_CAM_OCCUP 0x5017c
+/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
+ * the initial credit value; read returns the current value of the credit
+ * counter. Must be initialized to 1 at start-up.
+ */
+#define TCM_REG_CFC_INIT_CRD 0x50204
+/* [RC 1] Message length mismatch (relative to last indication) at the In#9
+ * interface.
+ */
+#define TCM_REG_CSEM_LENGTH_MIS 0x50174
+/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
+ * writes the initial credit value; read returns the current value of the
+ * credit counter. Must be initialized to 64 at start-up.
+ */
+#define TCM_REG_FIC0_INIT_CRD 0x5020c
+/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
+ * writes the initial credit value; read returns the current value of the
+ * credit counter. Must be initialized to 64 at start-up.
+ */
+#define TCM_REG_FIC1_INIT_CRD 0x50210
+/* [RC 1] Message length mismatch (relative to last indication) at the In#7
+ * interface.
+ */
+#define TCM_REG_PBF_LENGTH_MIS 0x5016c
+/* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded;
+ * acknowledge output is deasserted; all other signals are treated as usual;
+ * if 1 - normal activity.
+ */
+#define TCM_REG_PRS_IFEN 0x50020
+/* [RC 1] Message length mismatch (relative to last indication) at the In#6
+ * interface.
+ */
+#define TCM_REG_PRS_LENGTH_MIS 0x50168
+/* [RC 1] Message length mismatch (relative to last indication) at the STORM
+ * interface.
+ */
+#define TCM_REG_STORM_LENGTH_MIS 0x50160
+/* [RW 11] Interrupt mask register #0 read/write */
+#define TCM_REG_TCM_INT_MASK 0x501dc
+/* [R 11] Interrupt register #0 read */
+#define TCM_REG_TCM_INT_STS 0x501d0
+/* [RC 11] Interrupt register #0 read clear */
+#define TCM_REG_TCM_INT_STS_CLR 0x501d4
+/* [RW 27] Parity mask register #0 read/write */
+#define TCM_REG_TCM_PRTY_MASK 0x501ec
+/* [R 27] Parity register #0 read */
+#define TCM_REG_TCM_PRTY_STS 0x501e0
+/* [RC 27] Parity register #0 read clear */
+#define TCM_REG_TCM_PRTY_STS_CLR 0x501e4
+/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
+ * the initial credit value; read returns the current value of the credit
+ * counter. Must be initialized to 32 at start-up.
+ */
+#define TCM_REG_TQM_INIT_CRD 0x5021c
+/* [RC 1] Message length mismatch (relative to last indication) at the SDM
+ * interface.
+ */
+#define TCM_REG_TSDM_LENGTH_MIS 0x50164
+/* [RC 1] Message length mismatch (relative to last indication) at the In#8
+ * interface.
+ */
+#define TCM_REG_USEM_LENGTH_MIS 0x50170
+/* [RW 21] Indirect access to the descriptor table of the XX protection
+ * mechanism. The fields are: [5:0] - length of the message; 15:6] - message
+ * pointer; 20:16] - next pointer.
+ */
+#define TCM_REG_XX_DESCR_TABLE 0x50280
+#define TCM_REG_XX_DESCR_TABLE_SIZE 29
+/* [R 6] Use to read the value of XX protection Free counter. */
+#define TCM_REG_XX_FREE 0x50178
+#define TM_REG_EN_LINEAR0_TIMER 0x164014
+/* [RW 18] Linear0 Max active cid (in banks of 32 entries). */
+#define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048
+/* [ST 16] Linear0 Number of scans counter. */
+#define TM_REG_LIN0_NUM_SCANS 0x1640a0
+#define TM_REG_LIN0_SCAN_ON 0x1640d0
+/* [RW 24] Linear0 array scan timeout. */
+#define TM_REG_LIN0_SCAN_TIME 0x16403c
+#define TM_REG_LIN0_VNIC_UC 0x164128
+/* [RW 1] Interrupt mask register #0 read/write */
+#define TM_REG_TM_INT_MASK 0x1640fc
+/* [R 1] Interrupt register #0 read */
+#define TM_REG_TM_INT_STS 0x1640f0
+/* [RC 1] Interrupt register #0 read clear */
+#define TM_REG_TM_INT_STS_CLR 0x1640f4
+/* [RW 7] Parity mask register #0 read/write */
+#define TM_REG_TM_PRTY_MASK 0x16410c
+/* [R 7] Parity register #0 read */
+#define TM_REG_TM_PRTY_STS 0x164100
+/* [RC 7] Parity register #0 read clear */
+#define TM_REG_TM_PRTY_STS_CLR 0x164104
+#define TSDM_REG_ENABLE_IN1 0x42238
+/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
+#define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x42548
+/* [R 1] parser fifo empty in sdm_sync block */
+#define TSDM_REG_SYNC_PARSER_EMPTY 0x42550
+/* [R 1] parser serial fifo empty in sdm_sync block */
+#define TSDM_REG_SYNC_SYNC_EMPTY 0x42558
+/* [RW 32] Interrupt mask register #0 read/write */
+#define TSDM_REG_TSDM_INT_MASK_0 0x4229c
+#define TSDM_REG_TSDM_INT_MASK_1 0x422ac
+/* [R 32] Interrupt register #0 read */
+#define TSDM_REG_TSDM_INT_STS_0 0x42290
+#define TSDM_REG_TSDM_INT_STS_1 0x422a0
+/* [RC 32] Interrupt register #0 read clear */
+#define TSDM_REG_TSDM_INT_STS_CLR_0 0x42294
+#define TSDM_REG_TSDM_INT_STS_CLR_1 0x422a4
+/* [RW 11] Parity mask register #0 read/write */
+#define TSDM_REG_TSDM_PRTY_MASK 0x422bc
+/* [R 11] Parity register #0 read */
+#define TSDM_REG_TSDM_PRTY_STS 0x422b0
+/* [RC 11] Parity register #0 read clear */
+#define TSDM_REG_TSDM_PRTY_STS_CLR 0x422b4
+/* [RW 32] This address space contains all registers and memories that are
+ * placed in SEM_FAST block. The SEM_FAST registers are described in
+ * appendix B. In order to access the SEM_FAST registers the base address
+ * TSEM_REGISTERS_FAST_MEMORY (Offset: 0x1a0000) should be added to each
+ * SEM_FAST register offset.
+ */
+#define TSEM_REG_FAST_MEMORY 0x1a0000
+/* [RW 15] Interrupt table Read and write access to it is not possible in
+ * the middle of the work
+ */
+#define TSEM_REG_INT_TABLE 0x180400
+/* [WB 128] Debug only. Passive buffer memory */
+#define TSEM_REG_PASSIVE_BUFFER 0x181000
+/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
+#define TSEM_REG_PRAM 0x1c0000
+/* [R 20] Valid sleeping threads indication have bit per thread */
+#define TSEM_REG_SLEEP_THREADS_VALID 0x18026c
+/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
+#define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0
+/* [RW 32] Interrupt mask register #0 read/write */
+#define TSEM_REG_TSEM_INT_MASK_0 0x180100
+#define TSEM_REG_TSEM_INT_MASK_1 0x180110
+/* [R 32] Interrupt register #0 read */
+#define TSEM_REG_TSEM_INT_STS_0 0x1800f4
+#define TSEM_REG_TSEM_INT_STS_1 0x180104
+/* [RC 32] Interrupt register #0 read clear */
+#define TSEM_REG_TSEM_INT_STS_CLR_0 0x1800f8
+#define TSEM_REG_TSEM_INT_STS_CLR_1 0x180108
+/* [RW 32] Parity mask register #0 read/write */
+#define TSEM_REG_TSEM_PRTY_MASK_0 0x180120
+#define TSEM_REG_TSEM_PRTY_MASK_1 0x180130
+/* [R 32] Parity register #0 read */
+#define TSEM_REG_TSEM_PRTY_STS_0 0x180114
+#define TSEM_REG_TSEM_PRTY_STS_1 0x180124
+/* [RC 32] Parity register #0 read clear */
+#define TSEM_REG_TSEM_PRTY_STS_CLR_0 0x180118
+#define TSEM_REG_TSEM_PRTY_STS_CLR_1 0x180128
+/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
+ * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid.
+ */
+#define TSEM_REG_VFPF_ERR_NUM 0x180380
+/* [R 5] Used to read the XX protection CAM occupancy counter. */
+#define UCM_REG_CAM_OCCUP 0xe0170
+/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
+ * the initial credit value; read returns the current value of the credit
+ * counter. Must be initialized to 1 at start-up.
+ */
+#define UCM_REG_CFC_INIT_CRD 0xe0204
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ * at the csem interface is detected.
+ */
+#define UCM_REG_CSEM_LENGTH_MIS 0xe0160
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ * at the dorq interface is detected.
+ */
+#define UCM_REG_DORQ_LENGTH_MIS 0xe0168
+/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
+ * writes the initial credit value; read returns the current value of the
+ * credit counter. Must be initialized to 64 at start-up.
+ */
+#define UCM_REG_FIC0_INIT_CRD 0xe020c
+/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
+ * writes the initial credit value; read returns the current value of the
+ * credit counter. Must be initialized to 64 at start-up.
+ */
+#define UCM_REG_FIC1_INIT_CRD 0xe0210
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ * at the STORM interface is detected.
+ */
+#define UCM_REG_STORM_LENGTH_MIS 0xe0154
+/* [RW 4] Timers output initial credit. Max credit available - 15.Write
+ * writes the initial credit value; read returns the current value of the
+ * credit counter. Must be initialized to 4 at start-up.
+ */
+#define UCM_REG_TM_INIT_CRD 0xe021c
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ * at the tsem interface is detected.
+ */
+#define UCM_REG_TSEM_LENGTH_MIS 0xe015c
+/* [RW 11] Interrupt mask register #0 read/write */
+#define UCM_REG_UCM_INT_MASK 0xe01d4
+/* [R 11] Interrupt register #0 read */
+#define UCM_REG_UCM_INT_STS 0xe01c8
+/* [RC 11] Interrupt register #0 read clear */
+#define UCM_REG_UCM_INT_STS_CLR 0xe01cc
+/* [RW 27] Parity mask register #0 read/write */
+#define UCM_REG_UCM_PRTY_MASK 0xe01e4
+/* [R 27] Parity register #0 read */
+#define UCM_REG_UCM_PRTY_STS 0xe01d8
+/* [RC 27] Parity register #0 read clear */
+#define UCM_REG_UCM_PRTY_STS_CLR 0xe01dc
+/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
+ * the initial credit value; read returns the current value of the credit
+ * counter. Must be initialized to 32 at start-up.
+ */
+#define UCM_REG_UQM_INIT_CRD 0xe0220
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ * at the SDM interface is detected.
+ */
+#define UCM_REG_USDM_LENGTH_MIS 0xe0158
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ * at the xsem interface isdetected.
+ */
+#define UCM_REG_XSEM_LENGTH_MIS 0xe0164
+/* [RW 20] Indirect access to the descriptor table of the XX protection
+ * mechanism. The fields are:[5:0] - message length; 14:6] - message
+ * pointer; 19:15] - next pointer.
+ */
+#define UCM_REG_XX_DESCR_TABLE 0xe0280
+#define UCM_REG_XX_DESCR_TABLE_SIZE 27
+/* [R 6] Use to read the XX protection Free counter. */
+#define UCM_REG_XX_FREE 0xe016c
+#define UMAC_COMMAND_CONFIG_REG_HD_ENA (0x1 << 10)
+#define UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE (0x1 << 28)
+#define UMAC_COMMAND_CONFIG_REG_LOOP_ENA (0x1 << 15)
+#define UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK (0x1 << 24)
+#define UMAC_COMMAND_CONFIG_REG_PAD_EN (0x1 << 5)
+#define UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE (0x1 << 8)
+#define UMAC_COMMAND_CONFIG_REG_PROMIS_EN (0x1 << 4)
+#define UMAC_COMMAND_CONFIG_REG_RX_ENA (0x1 << 1)
+#define UMAC_COMMAND_CONFIG_REG_SW_RESET (0x1 << 13)
+#define UMAC_COMMAND_CONFIG_REG_TX_ENA (0x1 << 0)
+#define UMAC_REG_COMMAND_CONFIG 0x8
+/* [RW 16] This is the duration for which MAC must wait to go back to ACTIVE
+ * state from LPI state when it receives packet for transmission. The
+ * decrement unit is 1 micro-second.
+ */
+#define UMAC_REG_EEE_WAKE_TIMER 0x6c
+/* [RW 32] Register Bit 0 refers to Bit 16 of the MAC address; Bit 1 refers
+ * to bit 17 of the MAC address etc.
+ */
+#define UMAC_REG_MAC_ADDR0 0xc
+/* [RW 16] Register Bit 0 refers to Bit 0 of the MAC address; Register Bit 1
+ * refers to Bit 1 of the MAC address etc. Bits 16 to 31 are reserved.
+ */
+#define UMAC_REG_MAC_ADDR1 0x10
+/* [RW 14] Defines a 14-Bit maximum frame length used by the MAC receive
+ * logic to check frames.
+ */
+#define UMAC_REG_MAXFR 0x14
+#define UMAC_REG_UMAC_EEE_CTRL 0x64
+#define UMAC_UMAC_EEE_CTRL_REG_EEE_EN (0x1 << 3)
+/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
+#define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc4550
+/* [R 1] parser fifo empty in sdm_sync block */
+#define USDM_REG_SYNC_PARSER_EMPTY 0xc4558
+/* [R 1] parser serial fifo empty in sdm_sync block */
+#define USDM_REG_SYNC_SYNC_EMPTY 0xc4560
+/* [RW 32] Interrupt mask register #0 read/write */
+#define USDM_REG_USDM_INT_MASK_0 0xc42a0
+#define USDM_REG_USDM_INT_MASK_1 0xc42b0
+/* [R 32] Interrupt register #0 read */
+#define USDM_REG_USDM_INT_STS_0 0xc4294
+#define USDM_REG_USDM_INT_STS_1 0xc42a4
+/* [RC 32] Interrupt register #0 read clear */
+#define USDM_REG_USDM_INT_STS_CLR_0 0xc4298
+#define USDM_REG_USDM_INT_STS_CLR_1 0xc42a8
+/* [RW 11] Parity mask register #0 read/write */
+#define USDM_REG_USDM_PRTY_MASK 0xc42c0
+/* [R 11] Parity register #0 read */
+#define USDM_REG_USDM_PRTY_STS 0xc42b4
+/* [RC 11] Parity register #0 read clear */
+#define USDM_REG_USDM_PRTY_STS_CLR 0xc42b8
+/* [RW 32] This address space contains all registers and memories that are
+ * placed in SEM_FAST block. The SEM_FAST registers are described in
+ * appendix B. In order to access the SEM_FAST registers the base address
+ * USEM_REGISTERS_FAST_MEMORY (Offset: 0x320000) should be added to each
+ * SEM_FAST register offset.
+ */
+#define USEM_REG_FAST_MEMORY 0x320000
+/* [RW 15] Interrupt table Read and write access to it is not possible in
+ * the middle of the work
+ */
+#define USEM_REG_INT_TABLE 0x300400
+/* [WB 128] Debug only. Passive buffer memory */
+#define USEM_REG_PASSIVE_BUFFER 0x302000
+/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
+#define USEM_REG_PRAM 0x340000
+/* [R 20] Valid sleeping threads indication have bit per thread */
+#define USEM_REG_SLEEP_THREADS_VALID 0x30026c
+/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
+#define USEM_REG_SLOW_EXT_STORE_EMPTY 0x3002a0
+/* [RW 32] Interrupt mask register #0 read/write */
+#define USEM_REG_USEM_INT_MASK_0 0x300110
+#define USEM_REG_USEM_INT_MASK_1 0x300120
+/* [R 32] Interrupt register #0 read */
+#define USEM_REG_USEM_INT_STS_0 0x300104
+#define USEM_REG_USEM_INT_STS_1 0x300114
+/* [RC 32] Interrupt register #0 read clear */
+#define USEM_REG_USEM_INT_STS_CLR_0 0x300108
+#define USEM_REG_USEM_INT_STS_CLR_1 0x300118
+/* [RW 32] Parity mask register #0 read/write */
+#define USEM_REG_USEM_PRTY_MASK_0 0x300130
+#define USEM_REG_USEM_PRTY_MASK_1 0x300140
+/* [R 32] Parity register #0 read */
+#define USEM_REG_USEM_PRTY_STS_0 0x300124
+#define USEM_REG_USEM_PRTY_STS_1 0x300134
+/* [RC 32] Parity register #0 read clear */
+#define USEM_REG_USEM_PRTY_STS_CLR_0 0x300128
+#define USEM_REG_USEM_PRTY_STS_CLR_1 0x300138
+/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
+ * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid.
+ */
+#define USEM_REG_VFPF_ERR_NUM 0x300380
+#define VFC_MEMORIES_RST_REG_CAM_RST (0x1 << 0)
+#define VFC_MEMORIES_RST_REG_RAM_RST (0x1 << 1)
+#define VFC_REG_MEMORIES_RST 0x1943c
+/* [RW 1] Interrupt mask register #0 read/write */
+#define VFC_REG_VFC_INT_MASK 0x194f0
+/* [R 1] Interrupt register #0 read */
+#define VFC_REG_VFC_INT_STS 0x194fc
+/* [RC 1] Interrupt register #0 read clear */
+#define VFC_REG_VFC_INT_STS_CLR 0x194f8
+/* [RW 1] Parity mask register #0 read/write */
+#define VFC_REG_VFC_PRTY_MASK 0x194e0
+/* [R 1] Parity register #0 read */
+#define VFC_REG_VFC_PRTY_STS 0x194ec
+/* [RC 1] Parity register #0 read clear */
+#define VFC_REG_VFC_PRTY_STS_CLR 0x194e8
+/* [R 5] Used to read the XX protection CAM occupancy counter. */
+#define XCM_REG_CAM_OCCUP 0x20244
+/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
+ * the initial credit value; read returns the current value of the credit
+ * counter. Must be initialized to 1 at start-up.
+ */
+#define XCM_REG_CFC_INIT_CRD 0x20404
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ * the csem interface.
+ */
+#define XCM_REG_CSEM_LENGTH_MIS 0x20228
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ * the dorq interface.
+ */
+#define XCM_REG_DORQ_LENGTH_MIS 0x20230
+/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
+ * writes the initial credit value; read returns the current value of the
+ * credit counter. Must be initialized to 64 at start-up.
+ */
+#define XCM_REG_FIC0_INIT_CRD 0x2040c
+/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
+ * writes the initial credit value; read returns the current value of the
+ * credit counter. Must be initialized to 64 at start-up.
+ */
+#define XCM_REG_FIC1_INIT_CRD 0x20410
+#define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ * the nig0 interface.
+ */
+#define XCM_REG_NIG0_LENGTH_MIS 0x20238
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ * the nig1 interface.
+ */
+#define XCM_REG_NIG1_LENGTH_MIS 0x2023c
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ * the pbf interface.
+ */
+#define XCM_REG_PBF_LENGTH_MIS 0x20234
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ * the STORM interface.
+ */
+#define XCM_REG_STORM_LENGTH_MIS 0x2021c
+/* [RW 4] Timers output initial credit. Max credit available - 15.Write
+ * writes the initial credit value; read returns the current value of the
+ * credit counter. Must be initialized to 4 at start-up.
+ */
+#define XCM_REG_TM_INIT_CRD 0x2041c
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ * the tsem interface.
+ */
+#define XCM_REG_TSEM_LENGTH_MIS 0x20224
+/* [RC 1] Message length mismatch (relative to last indication) at the usem
+ * interface.
+ */
+#define XCM_REG_USEM_LENGTH_MIS 0x2022c
+#define XCM_REG_WU_DA_CNT_CMD00 0x201d4
+#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4
+/* [RW 14] Interrupt mask register #0 read/write */
+#define XCM_REG_XCM_INT_MASK 0x202b4
+/* [R 14] Interrupt register #0 read */
+#define XCM_REG_XCM_INT_STS 0x202a8
+/* [RC 14] Interrupt register #0 read clear */
+#define XCM_REG_XCM_INT_STS_CLR 0x202ac
+/* [RW 30] Parity mask register #0 read/write */
+#define XCM_REG_XCM_PRTY_MASK 0x202c4
+/* [R 30] Parity register #0 read */
+#define XCM_REG_XCM_PRTY_STS 0x202b8
+/* [RC 30] Parity register #0 read clear */
+#define XCM_REG_XCM_PRTY_STS_CLR 0x202bc
+/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
+ * the initial credit value; read returns the current value of the credit
+ * counter. Must be initialized to 32 at start-up.
+ */
+#define XCM_REG_XQM_INIT_CRD 0x20420
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ * the SDM interface.
+ */
+#define XCM_REG_XSDM_LENGTH_MIS 0x20220
+/* [RW 17] Indirect access to the descriptor table of the XX protection
+ * mechanism. The fields are: [5:0] - message length; 11:6] - message
+ * pointer; 16:12] - next pointer.
+ */
+#define XCM_REG_XX_DESCR_TABLE 0x20480
+#define XCM_REG_XX_DESCR_TABLE_SIZE 32
+/* [R 6] Used to read the XX protection Free counter. */
+#define XCM_REG_XX_FREE 0x20240
+#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS (0x1 << 0)
+#define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS (0x1 << 1)
+#define XMAC_CTRL_REG_LINE_LOCAL_LPBK (0x1 << 2)
+#define XMAC_CTRL_REG_RX_EN (0x1 << 1)
+#define XMAC_CTRL_REG_SOFT_RESET (0x1 << 6)
+#define XMAC_CTRL_REG_TX_EN (0x1 << 0)
+#define XMAC_CTRL_REG_XLGMII_ALIGN_ENB (0x1 << 7)
+#define XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN (0x1 << 18)
+#define XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN (0x1 << 17)
+#define XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON (0x1 << 1)
+#define XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN (0x1 << 0)
+#define XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN (0x1 << 3)
+#define XMAC_PFC_CTRL_HI_REG_RX_PFC_EN (0x1 << 4)
+#define XMAC_PFC_CTRL_HI_REG_TX_PFC_EN (0x1 << 5)
+#define XMAC_REG_CLEAR_RX_LSS_STATUS 0x60
+#define XMAC_REG_CTRL 0
+/* [RW 16] Upper 48 bits of ctrl_sa register. Used as the SA in PAUSE/PFC
+ * packets transmitted by the MAC
+ */
+#define XMAC_REG_CTRL_SA_HI 0x2c
+/* [RW 32] Lower 48 bits of ctrl_sa register. Used as the SA in PAUSE/PFC
+ * packets transmitted by the MAC
+ */
+#define XMAC_REG_CTRL_SA_LO 0x28
+#define XMAC_REG_EEE_CTRL 0xd8
+#define XMAC_REG_EEE_TIMERS_HI 0xe4
+#define XMAC_REG_PAUSE_CTRL 0x68
+#define XMAC_REG_PFC_CTRL 0x70
+#define XMAC_REG_PFC_CTRL_HI 0x74
+#define XMAC_REG_RX_LSS_CTRL 0x50
+#define XMAC_REG_RX_LSS_STATUS 0x58
+/* [RW 14] Maximum packet size in receive direction; exclusive of preamble &
+ * CRC in strip mode
+ */
+#define XMAC_REG_RX_MAX_SIZE 0x40
+#define XMAC_REG_TX_CTRL 0x20
+#define XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE (0x1 << 0)
+#define XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE (0x1 << 1)
+/* [W 17] Generate an operation after completion; bit-16 is
+ * AggVectIdx_valid; bits 15:8 are AggVectIdx; bits 7:5 are the TRIG and
+ * bits 4:0 are the T124Param[4:0]
+ */
+#define XSDM_REG_OPERATION_GEN 0x1664c4
+/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
+#define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x166548
+/* [R 1] parser fifo empty in sdm_sync block */
+#define XSDM_REG_SYNC_PARSER_EMPTY 0x166550
+/* [R 1] parser serial fifo empty in sdm_sync block */
+#define XSDM_REG_SYNC_SYNC_EMPTY 0x166558
+/* [RW 32] Interrupt mask register #0 read/write */
+#define XSDM_REG_XSDM_INT_MASK_0 0x16629c
+#define XSDM_REG_XSDM_INT_MASK_1 0x1662ac
+/* [R 32] Interrupt register #0 read */
+#define XSDM_REG_XSDM_INT_STS_0 0x166290
+#define XSDM_REG_XSDM_INT_STS_1 0x1662a0
+/* [RC 32] Interrupt register #0 read clear */
+#define XSDM_REG_XSDM_INT_STS_CLR_0 0x166294
+#define XSDM_REG_XSDM_INT_STS_CLR_1 0x1662a4
+/* [RW 11] Parity mask register #0 read/write */
+#define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
+/* [R 11] Parity register #0 read */
+#define XSDM_REG_XSDM_PRTY_STS 0x1662b0
+/* [RC 11] Parity register #0 read clear */
+#define XSDM_REG_XSDM_PRTY_STS_CLR 0x1662b4
+/* [RW 32] This address space contains all registers and memories that are
+ * placed in SEM_FAST block. The SEM_FAST registers are described in
+ * appendix B. In order to access the SEM_FAST registers the base address
+ * XSEM_REGISTERS_FAST_MEMORY (Offset: 0x2a0000) should be added to each
+ * SEM_FAST register offset.
+ */
+#define XSEM_REG_FAST_MEMORY 0x2a0000
+/* [RW 15] Interrupt table Read and write access to it is not possible in
+ * the middle of the work
+ */
+#define XSEM_REG_INT_TABLE 0x280400
+/* [WB 128] Debug only. Passive buffer memory */
+#define XSEM_REG_PASSIVE_BUFFER 0x282000
+/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
+#define XSEM_REG_PRAM 0x2c0000
+/* [R 20] Valid sleeping threads indication have bit per thread */
+#define XSEM_REG_SLEEP_THREADS_VALID 0x28026c
+/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
+#define XSEM_REG_SLOW_EXT_STORE_EMPTY 0x2802a0
+/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
+ * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid.
+ */
+#define XSEM_REG_VFPF_ERR_NUM 0x280380
+/* [RW 32] Interrupt mask register #0 read/write */
+#define XSEM_REG_XSEM_INT_MASK_0 0x280110
+#define XSEM_REG_XSEM_INT_MASK_1 0x280120
+/* [R 32] Interrupt register #0 read */
+#define XSEM_REG_XSEM_INT_STS_0 0x280104
+#define XSEM_REG_XSEM_INT_STS_1 0x280114
+/* [RC 32] Interrupt register #0 read clear */
+#define XSEM_REG_XSEM_INT_STS_CLR_0 0x280108
+#define XSEM_REG_XSEM_INT_STS_CLR_1 0x280118
+/* [RW 32] Parity mask register #0 read/write */
+#define XSEM_REG_XSEM_PRTY_MASK_0 0x280130
+#define XSEM_REG_XSEM_PRTY_MASK_1 0x280140
+/* [R 32] Parity register #0 read */
+#define XSEM_REG_XSEM_PRTY_STS_0 0x280124
+#define XSEM_REG_XSEM_PRTY_STS_1 0x280134
+/* [RC 32] Parity register #0 read clear */
+#define XSEM_REG_XSEM_PRTY_STS_CLR_0 0x280128
+#define XSEM_REG_XSEM_PRTY_STS_CLR_1 0x280138
+#define MCPR_ACCESS_LOCK_LOCK (1L << 31)
+#define MCPR_IMC_COMMAND_ENABLE (1L << 31)
+#define MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT 16
+#define MCPR_IMC_COMMAND_OPERATION_BITSHIFT 28
+#define MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT 8
+#define MCPR_NVM_ACCESS_ENABLE_EN (1L << 0)
+#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L << 1)
+#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL << 0)
+#define MCPR_NVM_CFG4_FLASH_SIZE (0x7L << 0)
+#define MCPR_NVM_COMMAND_DOIT (1L << 4)
+#define MCPR_NVM_COMMAND_DONE (1L << 3)
+#define MCPR_NVM_COMMAND_FIRST (1L << 7)
+#define MCPR_NVM_COMMAND_LAST (1L << 8)
+#define MCPR_NVM_COMMAND_WR (1L << 5)
+#define MCPR_NVM_SW_ARB_ARB_ARB1 (1L << 9)
+#define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L << 5)
+#define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L << 1)
+#define BIGMAC_REGISTER_BMAC_CONTROL (0x00 << 3)
+#define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01 << 3)
+#define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05 << 3)
+#define BIGMAC_REGISTER_RX_CONTROL (0x21 << 3)
+#define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46 << 3)
+#define BIGMAC_REGISTER_RX_LSS_STATUS (0x43 << 3)
+#define BIGMAC_REGISTER_RX_MAX_SIZE (0x23 << 3)
+#define BIGMAC_REGISTER_RX_STAT_GR64 (0x26 << 3)
+#define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42 << 3)
+#define BIGMAC_REGISTER_TX_CONTROL (0x07 << 3)
+#define BIGMAC_REGISTER_TX_MAX_SIZE (0x09 << 3)
+#define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A << 3)
+#define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08 << 3)
+#define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20 << 3)
+#define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C << 3)
+#define BIGMAC2_REGISTER_BMAC_CONTROL (0x00 << 3)
+#define BIGMAC2_REGISTER_BMAC_XGXS_CONTROL (0x01 << 3)
+#define BIGMAC2_REGISTER_CNT_MAX_SIZE (0x05 << 3)
+#define BIGMAC2_REGISTER_PFC_CONTROL (0x06 << 3)
+#define BIGMAC2_REGISTER_RX_CONTROL (0x3A << 3)
+#define BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS (0x62 << 3)
+#define BIGMAC2_REGISTER_RX_LSS_STAT (0x3E << 3)
+#define BIGMAC2_REGISTER_RX_MAX_SIZE (0x3C << 3)
+#define BIGMAC2_REGISTER_RX_STAT_GR64 (0x40 << 3)
+#define BIGMAC2_REGISTER_RX_STAT_GRIPJ (0x5f << 3)
+#define BIGMAC2_REGISTER_TX_CONTROL (0x1C << 3)
+#define BIGMAC2_REGISTER_TX_MAX_SIZE (0x1E << 3)
+#define BIGMAC2_REGISTER_TX_PAUSE_CONTROL (0x20 << 3)
+#define BIGMAC2_REGISTER_TX_SOURCE_ADDR (0x1D << 3)
+#define BIGMAC2_REGISTER_TX_STAT_GTBYT (0x39 << 3)
+#define BIGMAC2_REGISTER_TX_STAT_GTPOK (0x22 << 3)
+#define EMAC_LED_1000MB_OVERRIDE (1L << 1)
+#define EMAC_LED_100MB_OVERRIDE (1L << 2)
+#define EMAC_LED_10MB_OVERRIDE (1L << 3)
+#define EMAC_LED_OVERRIDE (1L << 0)
+#define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L << 26)
+#define EMAC_MDIO_COMM_COMMAND_READ_22 (2L << 26)
+#define EMAC_MDIO_COMM_COMMAND_READ_45 (3L << 26)
+#define EMAC_MDIO_COMM_COMMAND_WRITE_22 (1L << 26)
+#define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L << 26)
+#define EMAC_MDIO_COMM_DATA (0xffffL << 0)
+#define EMAC_MDIO_COMM_START_BUSY (1L << 29)
+#define EMAC_MDIO_MODE_AUTO_POLL (1L << 4)
+#define EMAC_MDIO_MODE_CLAUSE_45 (1L << 31)
+#define EMAC_MDIO_MODE_CLOCK_CNT (0x3ffL << 16)
+#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16
+#define EMAC_MDIO_STATUS_10MB (1L << 1)
+#define EMAC_MODE_25G_MODE (1L << 5)
+#define EMAC_MODE_HALF_DUPLEX (1L << 1)
+#define EMAC_MODE_PORT_GMII (2L << 2)
+#define EMAC_MODE_PORT_MII (1L << 2)
+#define EMAC_MODE_PORT_MII_10M (3L << 2)
+#define EMAC_MODE_RESET (1L << 0)
+#define EMAC_REG_EMAC_LED 0xc
+#define EMAC_REG_EMAC_MAC_MATCH 0x10
+#define EMAC_REG_EMAC_MDIO_COMM 0xac
+#define EMAC_REG_EMAC_MDIO_MODE 0xb4
+#define EMAC_REG_EMAC_MDIO_STATUS 0xb0
+#define EMAC_REG_EMAC_MODE 0x0
+#define EMAC_REG_EMAC_RX_MODE 0xc8
+#define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c
+#define EMAC_REG_EMAC_RX_STAT_AC 0x180
+#define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4
+#define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23
+#define EMAC_REG_EMAC_TX_MODE 0xbc
+#define EMAC_REG_EMAC_TX_STAT_AC 0x280
+#define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22
+#define EMAC_REG_RX_PFC_MODE 0x320
+#define EMAC_REG_RX_PFC_MODE_PRIORITIES (1L << 2)
+#define EMAC_REG_RX_PFC_MODE_RX_EN (1L << 1)
+#define EMAC_REG_RX_PFC_MODE_TX_EN (1L << 0)
+#define EMAC_REG_RX_PFC_PARAM 0x324
+#define EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT 0
+#define EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT 16
+#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD 0x328
+#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT (0xffff << 0)
+#define EMAC_REG_RX_PFC_STATS_XOFF_SENT 0x330
+#define EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT (0xffff << 0)
+#define EMAC_REG_RX_PFC_STATS_XON_RCVD 0x32c
+#define EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT (0xffff << 0)
+#define EMAC_REG_RX_PFC_STATS_XON_SENT 0x334
+#define EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT (0xffff << 0)
+#define EMAC_RX_MODE_FLOW_EN (1L << 2)
+#define EMAC_RX_MODE_KEEP_MAC_CONTROL (1L << 3)
+#define EMAC_RX_MODE_KEEP_VLAN_TAG (1L << 10)
+#define EMAC_RX_MODE_PROMISCUOUS (1L << 8)
+#define EMAC_RX_MODE_RESET (1L << 0)
+#define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L << 31)
+#define EMAC_TX_MODE_EXT_PAUSE_EN (1L << 3)
+#define EMAC_TX_MODE_FLOW_EN (1L << 4)
+#define EMAC_TX_MODE_RESET (1L << 0)
+#define MISC_REGISTERS_GPIO_0 0
+#define MISC_REGISTERS_GPIO_1 1
+#define MISC_REGISTERS_GPIO_2 2
+#define MISC_REGISTERS_GPIO_3 3
+#define MISC_REGISTERS_GPIO_CLR_POS 16
+#define MISC_REGISTERS_GPIO_FLOAT (0xffL << 24)
+#define MISC_REGISTERS_GPIO_FLOAT_POS 24
+#define MISC_REGISTERS_GPIO_HIGH 1
+#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2
+#define MISC_REGISTERS_GPIO_INT_CLR_POS 24
+#define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR 0
+#define MISC_REGISTERS_GPIO_INT_OUTPUT_SET 1
+#define MISC_REGISTERS_GPIO_INT_SET_POS 16
+#define MISC_REGISTERS_GPIO_LOW 0
+#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1
+#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0
+#define MISC_REGISTERS_GPIO_PORT_SHIFT 4
+#define MISC_REGISTERS_GPIO_SET_POS 8
+#define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588
+#define MISC_REGISTERS_RESET_REG_1_RST_BRB1 (0x1 << 0)
+#define MISC_REGISTERS_RESET_REG_1_RST_DORQ (0x1 << 19)
+#define MISC_REGISTERS_RESET_REG_1_RST_HC (0x1 << 29)
+#define MISC_REGISTERS_RESET_REG_1_RST_PXP (0x1 << 26)
+#define MISC_REGISTERS_RESET_REG_1_RST_PXPV (0x1 << 27)
+#define MISC_REGISTERS_RESET_REG_1_RST_QM (0x1 << 17)
+#define MISC_REGISTERS_RESET_REG_1_SET 0x584
+#define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598
+#define MISC_REGISTERS_RESET_REG_2_MSTAT0 (0x1 << 24)
+#define MISC_REGISTERS_RESET_REG_2_MSTAT1 (0x1 << 25)
+#define MISC_REGISTERS_RESET_REG_2_PGLC (0x1 << 19)
+#define MISC_REGISTERS_RESET_REG_2_RST_ATC (0x1 << 17)
+#define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1 << 0)
+#define MISC_REGISTERS_RESET_REG_2_RST_BMAC1 (0x1 << 1)
+#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0 (0x1 << 2)
+#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE (0x1 << 14)
+#define MISC_REGISTERS_RESET_REG_2_RST_EMAC1 (0x1 << 3)
+#define MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE (0x1 << 15)
+#define MISC_REGISTERS_RESET_REG_2_RST_GRC (0x1 << 4)
+#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B (0x1 << 6)
+#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE (0x1 << 8)
+#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU (0x1 << 7)
+#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE (0x1 << 5)
+#define MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE (0x1 << 11)
+#define MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO (0x1 << 13)
+#define MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR (0x1 << 16)
+#define MISC_REGISTERS_RESET_REG_2_RST_RBCN (0x1 << 9)
+#define MISC_REGISTERS_RESET_REG_2_SET 0x594
+#define MISC_REGISTERS_RESET_REG_2_UMAC0 (0x1 << 20)
+#define MISC_REGISTERS_RESET_REG_2_UMAC1 (0x1 << 21)
+#define MISC_REGISTERS_RESET_REG_2_XMAC (0x1 << 22)
+#define MISC_REGISTERS_RESET_REG_2_XMAC_SOFT (0x1 << 23)
+#define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1 << 1)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1 << 2)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1 << 3)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1 << 0)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1 << 5)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1 << 6)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1 << 7)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1 << 4)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1 << 8)
+#define MISC_REGISTERS_RESET_REG_3_SET 0x5a4
+#define MISC_SPIO_CLR_POS 16
+#define MISC_SPIO_FLOAT (0xffL << 24)
+#define MISC_SPIO_FLOAT_POS 24
+#define MISC_SPIO_INPUT_HI_Z 2
+#define MISC_SPIO_INT_OLD_SET_POS 16
+#define MISC_SPIO_OUTPUT_HIGH 1
+#define MISC_SPIO_OUTPUT_LOW 0
+#define MISC_SPIO_SET_POS 8
+#define MISC_SPIO_SPIO4 0x10
+#define MISC_SPIO_SPIO5 0x20
+#define HW_LOCK_MAX_RESOURCE_VALUE 31
+#define HW_LOCK_RESOURCE_DCBX_ADMIN_MIB 13
+#define HW_LOCK_RESOURCE_DRV_FLAGS 10
+#define HW_LOCK_RESOURCE_GPIO 1
+#define HW_LOCK_RESOURCE_MDIO 0
+#define HW_LOCK_RESOURCE_NVRAM 12
+#define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3
+#define HW_LOCK_RESOURCE_RECOVERY_LEADER_0 8
+#define HW_LOCK_RESOURCE_RECOVERY_LEADER_1 9
+#define HW_LOCK_RESOURCE_RECOVERY_REG 11
+#define HW_LOCK_RESOURCE_RESET 5
+#define HW_LOCK_RESOURCE_SPIO 2
+#define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1 << 4)
+#define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1 << 5)
+#define AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT (0x1 << 19)
+#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1 << 18)
+#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (0x1 << 31)
+#define AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR (0x1 << 30)
+#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (0x1 << 9)
+#define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (0x1 << 8)
+#define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (0x1 << 7)
+#define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (0x1 << 6)
+#define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (0x1 << 29)
+#define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (0x1 << 28)
+#define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (0x1 << 1)
+#define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (0x1 << 0)
+#define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (0x1 << 18)
+#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (0x1 << 11)
+#define AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR (0x1 << 10)
+#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (0x1 << 13)
+#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (0x1 << 12)
+#define AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 (0x1 << 2)
+#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (0x1 << 12)
+#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY (0x1 << 28)
+#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY (0x1 << 31)
+#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY (0x1 << 29)
+#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY (0x1 << 30)
+#define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (0x1 << 15)
+#define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (0x1 << 14)
+#define AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR (0x1 << 14)
+#define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (0x1 << 20)
+#define AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT (0x1 << 31)
+#define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (0x1 << 30)
+#define AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR (0x1 << 0)
+#define AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT (0x1 << 2)
+#define AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR (0x1 << 3)
+#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (0x1 << 5)
+#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (0x1 << 4)
+#define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (0x1 << 3)
+#define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (0x1 << 2)
+#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (0x1 << 3)
+#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (0x1 << 2)
+#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (0x1 << 22)
+#define AEU_INPUTS_ATTN_BITS_SPIO5 (0x1 << 15)
+#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (0x1 << 27)
+#define AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR (0x1 << 26)
+#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (0x1 << 5)
+#define AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR (0x1 << 4)
+#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (0x1 << 25)
+#define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (0x1 << 24)
+#define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (0x1 << 29)
+#define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (0x1 << 28)
+#define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (0x1 << 23)
+#define AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR (0x1 << 22)
+#define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (0x1 << 27)
+#define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (0x1 << 26)
+#define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (0x1 << 21)
+#define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (0x1 << 20)
+#define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (0x1 << 25)
+#define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (0x1 << 24)
+#define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (0x1 << 16)
+#define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (0x1 << 9)
+#define AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR (0x1 << 8)
+#define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (0x1 << 7)
+#define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (0x1 << 6)
+#define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (0x1 << 11)
+#define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (0x1 << 10)
#define RESERVED_GENERAL_ATTENTION_BIT_0 0
#define EVEREST_GEN_ATTN_IN_USE_MASK 0x7ffe0
/* Used For Error Recovery: changing this will require more \
changes in code that assume
- * error recovery uses general attn bit20 ! */
+ * error recovery uses general attn bit20 !
+ */
#define ERROR_RECOVERY_ATTENTION_BIT \
RESERVED_GENERAL_ATTENTION_BIT_20
#define RESERVED_ATTENTION_BIT \
#define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32)
#define GENERAL_ATTEN_OFFSET(atten_name) (1UL << ((94 + atten_name) % 32))
-
-
/*
* This file defines GRC base address for every block.
* This file is included by chipsim, asm microcode and cpp microcode.
if set, generate pcie_err_attn output when this error is seen. WC \
*/
#define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT2 \
- (1 << 3) /* Receive UR Statusfor Function 2. If set, generate \
+ (1 << 3) /* Receive UR Status for Function 2. If set, generate \
pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT2 \
(1 << 2) /* Completer Timeout Status Status for Function 2, if \
if set, generate pcie_err_attn output when this error is seen. WC \
*/
#define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT5 \
- (1 << 3) /* Receive UR Statusfor Function 5. If set, generate \
+ (1 << 3) /* Receive UR Status for Function 5. If set, generate \
pcie_err_attn output when this error is seen. WC */
#define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT5 \
(1 << 2) /* Completer Timeout Status Status for Function 5, if \
#define ME_REG_VF_VALID (1<<8)
#define ME_REG_VF_NUM_SHIFT 9
#define ME_REG_VF_NUM_MASK (0x3f<<ME_REG_VF_NUM_SHIFT)
-#define VF_ID(x) ((x & ME_REG_VF_NUM_MASK) >> ME_REG_VF_NUM_SHIFT)
+#define VF_ID(x) 0 /* TODO: remove def */
#define ME_REG_VF_ERR (0x1<<3)
#define ME_REG_ABS_PF_NUM_SHIFT 16
#define ME_REG_ABS_PF_NUM \
#define PCI_MSIX_TABLE_ENABLE_MASK 0x8000
+#if (defined(__LINUX)) || (defined(PCI_CAP_LIST_ID))
+#define PCI_CAP_LIST_ID_DEF
+#endif
+#if (defined(__LINUX)) || (defined(PCI_CAP_LIST_NEXT))
+#define PCI_CAP_LIST_NEXT_DEF
+#endif
+#if (defined(__LINUX)) || (defined(PCI_STATUS))
+#define PCI_STATUS_DEF
+#endif
+#if (defined(__LINUX)) || (defined(PCI_STATUS_CAP_LIST))
+#define PCI_STATUS_CAP_LIST_DEF
+#endif
+
+
#define MDIO_REG_BANK_CL73_IEEEB0 0x0
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200
#define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0
#define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G 0x40
#define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1
+#define MDIO_AN_REG_848xx_ID_MSB 0xffe2
+#define BNX2X84858_PHY_ID 0x600d
+#define MDIO_AN_REG_848xx_ID_LSB 0xffe3
#define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4
#define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6
#define MDIO_AN_REG_8481_1000T_CTRL 0xffe9
#define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5
#define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7
#define MDIO_AN_REG_8481_AUX_CTRL 0xfff8
+#define MDIO_AN_REG_8481_INTERRUPT_MASK 0xfffb
#define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc
/* BNX2X84823 only */
#define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3
#define MDIO_PMA_REG_84833_CTL_LED_CTL_1 0xa8ec
#define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080
+/* BNX2X84858 only */
+#define MDIO_PMA_REG_84858_ALLOW_GPHY_ACT 0x8000
/* BNX2X84833 only */
#define MDIO_84833_TOP_CFG_FW_REV 0x400f
#define MDIO_84833_TOP_CFG_FW_NO_EEE 0x1f81
#define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a
#define MDIO_84833_SUPER_ISOLATE 0x8000
-/* These are mailbox register set used by 84833. */
-#define MDIO_84833_TOP_CFG_SCRATCH_REG0 0x4005
-#define MDIO_84833_TOP_CFG_SCRATCH_REG1 0x4006
-#define MDIO_84833_TOP_CFG_SCRATCH_REG2 0x4007
-#define MDIO_84833_TOP_CFG_SCRATCH_REG3 0x4008
-#define MDIO_84833_TOP_CFG_SCRATCH_REG4 0x4009
-#define MDIO_84833_TOP_CFG_SCRATCH_REG26 0x4037
-#define MDIO_84833_TOP_CFG_SCRATCH_REG27 0x4038
-#define MDIO_84833_TOP_CFG_SCRATCH_REG28 0x4039
-#define MDIO_84833_TOP_CFG_SCRATCH_REG29 0x403a
-#define MDIO_84833_TOP_CFG_SCRATCH_REG30 0x403b
-#define MDIO_84833_TOP_CFG_SCRATCH_REG31 0x403c
-#define MDIO_84833_CMD_HDLR_COMMAND MDIO_84833_TOP_CFG_SCRATCH_REG0
-#define MDIO_84833_CMD_HDLR_STATUS MDIO_84833_TOP_CFG_SCRATCH_REG26
-#define MDIO_84833_CMD_HDLR_DATA1 MDIO_84833_TOP_CFG_SCRATCH_REG27
-#define MDIO_84833_CMD_HDLR_DATA2 MDIO_84833_TOP_CFG_SCRATCH_REG28
-#define MDIO_84833_CMD_HDLR_DATA3 MDIO_84833_TOP_CFG_SCRATCH_REG29
-#define MDIO_84833_CMD_HDLR_DATA4 MDIO_84833_TOP_CFG_SCRATCH_REG30
-#define MDIO_84833_CMD_HDLR_DATA5 MDIO_84833_TOP_CFG_SCRATCH_REG31
-
-/* Mailbox command set used by 84833. */
-#define PHY84833_CMD_SET_PAIR_SWAP 0x8001
-#define PHY84833_CMD_GET_EEE_MODE 0x8008
-#define PHY84833_CMD_SET_EEE_MODE 0x8009
-#define PHY84833_CMD_GET_CURRENT_TEMP 0x8031
-/* Mailbox status set used by 84833. */
+/* These are mailbox register set used by 84833/84858. */
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG0 0x4005
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG1 0x4006
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG2 0x4007
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG3 0x4008
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG4 0x4009
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG26 0x4037
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG27 0x4038
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG28 0x4039
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG29 0x403a
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG30 0x403b
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG31 0x403c
+#define MDIO_848xx_CMD_HDLR_COMMAND (MDIO_848xx_TOP_CFG_SCRATCH_REG0)
+#define MDIO_848xx_CMD_HDLR_STATUS (MDIO_848xx_TOP_CFG_SCRATCH_REG26)
+#define MDIO_848xx_CMD_HDLR_DATA1 (MDIO_848xx_TOP_CFG_SCRATCH_REG27)
+#define MDIO_848xx_CMD_HDLR_DATA2 (MDIO_848xx_TOP_CFG_SCRATCH_REG28)
+#define MDIO_848xx_CMD_HDLR_DATA3 (MDIO_848xx_TOP_CFG_SCRATCH_REG29)
+#define MDIO_848xx_CMD_HDLR_DATA4 (MDIO_848xx_TOP_CFG_SCRATCH_REG30)
+#define MDIO_848xx_CMD_HDLR_DATA5 (MDIO_848xx_TOP_CFG_SCRATCH_REG31)
+
+/* Mailbox command set used by 84833/84858 */
+#define PHY848xx_CMD_SET_PAIR_SWAP 0x8001
+#define PHY848xx_CMD_GET_EEE_MODE 0x8008
+#define PHY848xx_CMD_SET_EEE_MODE 0x8009
+#define PHY848xx_CMD_GET_CURRENT_TEMP 0x8031
+/* Mailbox status set used by 84833 only */
#define PHY84833_STATUS_CMD_RECEIVED 0x0001
#define PHY84833_STATUS_CMD_IN_PROGRESS 0x0002
#define PHY84833_STATUS_CMD_COMPLETE_PASS 0x0004
#define PHY84833_STATUS_CMD_NOT_OPEN_FOR_CMDS 0x0040
#define PHY84833_STATUS_CMD_CLEAR_COMPLETE 0x0080
#define PHY84833_STATUS_CMD_OPEN_OVERRIDE 0xa5a5
+/* Mailbox Process */
+#define PHY84833_MB_PROCESS1 1
+#define PHY84833_MB_PROCESS2 2
+#define PHY84833_MB_PROCESS3 3
+
+/* Mailbox status set used by 84858 only */
+#define PHY84858_STATUS_CMD_RECEIVED 0x0001
+#define PHY84858_STATUS_CMD_IN_PROGRESS 0x0002
+#define PHY84858_STATUS_CMD_COMPLETE_PASS 0x0004
+#define PHY84858_STATUS_CMD_COMPLETE_ERROR 0x0008
+#define PHY84858_STATUS_CMD_SYSTEM_BUSY 0xbbbb
/* Warpcore clause 45 addressing */
#define MDIO_WC_REG_TX2_ANA_CTRL0 0x8081
#define MDIO_WC_REG_TX3_ANA_CTRL0 0x8091
#define MDIO_WC_REG_TX0_TX_DRIVER 0x8067
+#define MDIO_WC_REG_TX0_TX_DRIVER_IFIR_OFFSET 0x01
+#define MDIO_WC_REG_TX0_TX_DRIVER_IFIR_MASK 0x000e
#define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET 0x04
#define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_MASK 0x00f0
#define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET 0x08
#define MDIO_WC_REG_RX1_PCI_CTRL 0x80ca
#define MDIO_WC_REG_RX2_PCI_CTRL 0x80da
#define MDIO_WC_REG_RX3_PCI_CTRL 0x80ea
+#define MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI 0x80fa
#define MDIO_WC_REG_XGXSBLK2_UNICORE_MODE_10G 0x8104
+#define MDIO_WC_REG_XGXSBLK2_LANE_RESET 0x810a
#define MDIO_WC_REG_XGXS_STATUS3 0x8129
#define MDIO_WC_REG_PAR_DET_10G_STATUS 0x8130
#define MDIO_WC_REG_PAR_DET_10G_CTRL 0x8131
#define MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL 0x82e8
#define MDIO_WC_REG_CL72_USERB0_CL72_MISC4_CONTROL 0x82ec
#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1 0x8300
+#define AUTODET_EN (1 << 4)
#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2 0x8301
+#define EN_PARALLEL_DET 1
+#define FILTER_FORCE_LINK (1 << 2)
#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3 0x8302
#define MDIO_WC_REG_SERDESDIGITAL_STATUS1000X1 0x8304
#define MDIO_WC_REG_SERDESDIGITAL_MISC1 0x8308
#define MDIO_REG_GPHY_CL45_REG_READ 0xc000
#define MDIO_REG_GPHY_CL45_DATA_REG 0xe
#define MDIO_REG_GPHY_EEE_RESOLVED 0x803e
+#define MDIO_REG_GPHY_BASET_EXT_CTRL 0x10
+#define MDIO_REG_GPHY_TX_HIGH_LATENCY 0x1
#define MDIO_REG_GPHY_EXP_ACCESS_GATE 0x15
#define MDIO_REG_GPHY_EXP_ACCESS 0x17
#define MDIO_REG_GPHY_EXP_ACCESS_TOP 0xd00
#define MDIO_REG_GPHY_EXP_TOP_2K_BUF 0x40
+#define MDIO_REG_GPHY_SHADOW_ACCESS 0x18
+#define MDIO_REG_GPHY_SHADOW_AUX_CTRL (0x0)
+#define MDIO_REG_GPHY_SHADOW_MISC_CTRL (0x7)
#define MDIO_REG_GPHY_AUX_STATUS 0x19
#define MDIO_REG_INTR_STATUS 0x1a
#define MDIO_REG_INTR_MASK 0x1b
#define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED (0x1e << 10)
#define MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD (0x1 << 8)
-
#define IGU_FUNC_BASE 0x0400
#define IGU_ADDR_MSIX 0x0000
#define IGU_SEG_IDX_ATTN 2
#define IGU_SEG_IDX_DEFAULT 1
-/* Fields of IGU PF CONFIGRATION REGISTER */
+/* Fields of IGU PF CONFIGURATION REGISTER */
#define IGU_PF_CONF_FUNC_EN (0x1<<0) /* function enable */
#define IGU_PF_CONF_MSI_MSIX_EN (0x1<<1) /* MSI/MSIX enable */
#define IGU_PF_CONF_INT_LINE_EN (0x1<<2) /* INT enable */
#define IGU_PF_CONF_SINGLE_ISR_EN (0x1<<4) /* single ISR mode enable */
#define IGU_PF_CONF_SIMD_MODE (0x1<<5) /* simd all ones mode */
-/* Fields of IGU VF CONFIGRATION REGISTER */
+/* Fields of IGU VF CONFIGURATION REGISTER */
#define IGU_VF_CONF_FUNC_EN (0x1<<0) /* function enable */
#define IGU_VF_CONF_MSI_MSIX_EN (0x1<<1) /* MSI/MSIX enable */
#define IGU_VF_CONF_PARENT_MASK (0x3<<2) /* Parent PF */