/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright (c) 2014-2020 Broadcom Inc.
+ * Copyright (c) 2014-2021 Broadcom Inc.
* All rights reserved.
*
* DO NOT MODIFY!!! This file is automatically generated.
*/
uint16_t req_type;
#define HWRM_VER_GET UINT32_C(0x0)
+ #define HWRM_FUNC_ECHO_RESPONSE UINT32_C(0xb)
#define HWRM_ERROR_RECOVERY_QCFG UINT32_C(0xc)
#define HWRM_FUNC_DRV_IF_CHANGE UINT32_C(0xd)
#define HWRM_FUNC_BUF_UNRGTR UINT32_C(0xe)
#define HWRM_VNIC_PLCMODES_CFG UINT32_C(0x48)
#define HWRM_VNIC_PLCMODES_QCFG UINT32_C(0x49)
#define HWRM_VNIC_QCAPS UINT32_C(0x4a)
+ /* Updates specific fields in RX VNIC structure */
+ #define HWRM_VNIC_UPDATE UINT32_C(0x4b)
#define HWRM_RING_ALLOC UINT32_C(0x50)
#define HWRM_RING_FREE UINT32_C(0x51)
#define HWRM_RING_CMPL_RING_QAGGINT_PARAMS UINT32_C(0x52)
#define HWRM_QUEUE_MPLS_QCAPS UINT32_C(0x80)
#define HWRM_QUEUE_MPLSTC2PRI_QCFG UINT32_C(0x81)
#define HWRM_QUEUE_MPLSTC2PRI_CFG UINT32_C(0x82)
+ #define HWRM_QUEUE_VLANPRI_QCAPS UINT32_C(0x83)
+ #define HWRM_QUEUE_VLANPRI2PRI_QCFG UINT32_C(0x84)
+ #define HWRM_QUEUE_VLANPRI2PRI_CFG UINT32_C(0x85)
+ #define HWRM_QUEUE_GLOBAL_CFG UINT32_C(0x86)
+ #define HWRM_QUEUE_GLOBAL_QCFG UINT32_C(0x87)
#define HWRM_CFA_L2_FILTER_ALLOC UINT32_C(0x90)
#define HWRM_CFA_L2_FILTER_FREE UINT32_C(0x91)
#define HWRM_CFA_L2_FILTER_CFG UINT32_C(0x92)
#define HWRM_PORT_PHY_MDIO_BUS_ACQUIRE UINT32_C(0xb7)
#define HWRM_PORT_PHY_MDIO_BUS_RELEASE UINT32_C(0xb8)
#define HWRM_PORT_QSTATS_EXT_PFC_WD UINT32_C(0xb9)
- #define HWRM_PORT_ECN_QSTATS UINT32_C(0xba)
+ /* Reserved. */
+ #define HWRM_RESERVED7 UINT32_C(0xba)
+ #define HWRM_PORT_TX_FIR_CFG UINT32_C(0xbb)
+ #define HWRM_PORT_TX_FIR_QCFG UINT32_C(0xbc)
+ #define HWRM_PORT_ECN_QSTATS UINT32_C(0xbd)
+ #define HWRM_FW_LIVEPATCH_QUERY UINT32_C(0xbe)
+ #define HWRM_FW_LIVEPATCH UINT32_C(0xbf)
#define HWRM_FW_RESET UINT32_C(0xc0)
#define HWRM_FW_QSTATUS UINT32_C(0xc1)
#define HWRM_FW_HEALTH_CHECK UINT32_C(0xc2)
#define HWRM_FW_STATE_UNQUIESCE UINT32_C(0xd8)
/* Tells the fw to collect dsc dump on a given port and lane. */
#define HWRM_PORT_DSC_DUMP UINT32_C(0xd9)
+ #define HWRM_PORT_EP_TX_QCFG UINT32_C(0xda)
+ #define HWRM_PORT_EP_TX_CFG UINT32_C(0xdb)
#define HWRM_TEMP_MONITOR_QUERY UINT32_C(0xe0)
#define HWRM_REG_POWER_QUERY UINT32_C(0xe1)
#define HWRM_CORE_FREQUENCY_QUERY UINT32_C(0xe2)
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS UINT32_C(0x124)
/* Experimental - DEPRECATED */
#define HWRM_CFA_TFLIB UINT32_C(0x125)
+ /* Experimental */
+ #define HWRM_CFA_LAG_GROUP_MEMBER_RGTR UINT32_C(0x126)
+ /* Experimental */
+ #define HWRM_CFA_LAG_GROUP_MEMBER_UNRGTR UINT32_C(0x127)
/* Engine CKV - Get the current allocation status of keys provisioned in the key vault. */
#define HWRM_ENGINE_CKV_STATUS UINT32_C(0x12e)
/* Engine CKV - Add a new CKEK used to encrypt keys. */
#define HWRM_FUNC_QSTATS_EXT UINT32_C(0x198)
/* Queries extended statistics context */
#define HWRM_STAT_EXT_CTX_QUERY UINT32_C(0x199)
+ /* Configure SoC packet DMA settings */
+ #define HWRM_FUNC_SPD_CFG UINT32_C(0x19a)
+ /* Query SoC packet DMA settings */
+ #define HWRM_FUNC_SPD_QCFG UINT32_C(0x19b)
+ /* PTP - Queries configuration of timesync IO pins. */
+ #define HWRM_FUNC_PTP_PIN_QCFG UINT32_C(0x19c)
+ /* PTP - Configuration of timesync IO pins. */
+ #define HWRM_FUNC_PTP_PIN_CFG UINT32_C(0x19d)
+ /* PTP - Configuration for disciplining PHC. */
+ #define HWRM_FUNC_PTP_CFG UINT32_C(0x19e)
+ /* PTP - Queries for PHC timestamps. */
+ #define HWRM_FUNC_PTP_TS_QUERY UINT32_C(0x19f)
+ /* PTP - Extended PTP configuration. */
+ #define HWRM_FUNC_PTP_EXT_CFG UINT32_C(0x1a0)
+ /* PTP - Query extended PTP configuration. */
+ #define HWRM_FUNC_PTP_EXT_QCFG UINT32_C(0x1a1)
/* Experimental */
#define HWRM_SELFTEST_QLIST UINT32_C(0x200)
/* Experimental */
#define HWRM_MFG_FRU_EEPROM_WRITE UINT32_C(0x20a)
/* Tells the fw to read the fru memory */
#define HWRM_MFG_FRU_EEPROM_READ UINT32_C(0x20b)
+ /* Used to provision SoC software images */
+ #define HWRM_MFG_SOC_IMAGE UINT32_C(0x20c)
+ /* Retrieves the SoC status and image provisioning information */
+ #define HWRM_MFG_SOC_QSTATUS UINT32_C(0x20d)
+ /* Tells the fw to program the seeprom memory */
+ #define HWRM_MFG_PARAM_SEEPROM_SYNC UINT32_C(0x20e)
+ /* Tells the fw to read the seeprom memory */
+ #define HWRM_MFG_PARAM_SEEPROM_READ UINT32_C(0x20f)
+ /* Tells the fw to get the health of seeprom data */
+ #define HWRM_MFG_PARAM_SEEPROM_HEALTH UINT32_C(0x210)
+ /*
+ * The command is used for certificate provisioning to export a
+ * Certificate Signing Request (CSR) from the device.
+ */
+ #define HWRM_MFG_PRVSN_EXPORT_CSR UINT32_C(0x211)
+ /*
+ * The command is used for certificate provisioning to import a
+ * CA-signed certificate chain to the device.
+ */
+ #define HWRM_MFG_PRVSN_IMPORT_CERT UINT32_C(0x212)
+ /*
+ * The command is used for certificate provisioning to query the
+ * provisioned state.
+ */
+ #define HWRM_MFG_PRVSN_GET_STATE UINT32_C(0x213)
+ /*
+ * The command is used to get the hash of the NVM configuration that is
+ * calculated during firmware boot.
+ */
+ #define HWRM_MFG_GET_NVM_MEASUREMENT UINT32_C(0x214)
/* Experimental */
#define HWRM_TF UINT32_C(0x2bc)
/* Experimental */
/* Experimental */
#define HWRM_TF_SESSION_RESC_FLUSH UINT32_C(0x2cf)
/* Experimental */
+ #define HWRM_TF_SESSION_RESC_INFO UINT32_C(0x2d0)
+ /* Experimental */
#define HWRM_TF_TBL_TYPE_GET UINT32_C(0x2da)
/* Experimental */
#define HWRM_TF_TBL_TYPE_SET UINT32_C(0x2db)
/* Experimental */
+ #define HWRM_TF_TBL_TYPE_BULK_GET UINT32_C(0x2dc)
+ /* Experimental */
+ #define HWRM_TF_CTXT_MEM_ALLOC UINT32_C(0x2e2)
+ /* Experimental */
+ #define HWRM_TF_CTXT_MEM_FREE UINT32_C(0x2e3)
+ /* Experimental */
#define HWRM_TF_CTXT_MEM_RGTR UINT32_C(0x2e4)
/* Experimental */
#define HWRM_TF_CTXT_MEM_UNRGTR UINT32_C(0x2e5)
/* Experimental */
#define HWRM_TF_EM_DELETE UINT32_C(0x2eb)
/* Experimental */
+ #define HWRM_TF_EM_HASH_INSERT UINT32_C(0x2ec)
+ /* Experimental */
+ #define HWRM_TF_EM_MOVE UINT32_C(0x2ed)
+ /* Experimental */
#define HWRM_TF_TCAM_SET UINT32_C(0x2f8)
/* Experimental */
#define HWRM_TF_TCAM_GET UINT32_C(0x2f9)
#define HWRM_DBG_QCFG UINT32_C(0xff21)
/* Set destination parameters for crashdump medium */
#define HWRM_DBG_CRASHDUMP_MEDIUM_CFG UINT32_C(0xff22)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_ALLOC UINT32_C(0xff23)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_FREE UINT32_C(0xff24)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_FLUSH UINT32_C(0xff25)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_QCAPS UINT32_C(0xff26)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_CW_CFG UINT32_C(0xff27)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_SCHED_CFG UINT32_C(0xff28)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_RUN UINT32_C(0xff29)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_DELIVERY_REQ UINT32_C(0xff2a)
+ /* Experimental */
+ #define HWRM_DBG_USEQ_RESP_HDR UINT32_C(0xff2b)
+ #define HWRM_NVM_DEFRAG UINT32_C(0xffec)
#define HWRM_NVM_REQ_ARBITRATION UINT32_C(0xffed)
/* Experimental */
#define HWRM_NVM_FACTORY_DEFAULTS UINT32_C(0xffee)
* may try again later.
*/
#define HWRM_ERR_CODE_BUSY UINT32_C(0x10)
+ /*
+ * This error code is reported by Firmware when an operation requested
+ * by the host is not allowed due to a secure lock violation.
+ */
+ #define HWRM_ERR_CODE_RESOURCE_LOCKED UINT32_C(0x11)
+ /*
+ * This error code is reported by Firmware when an operation requested
+ * by a VF cannot be forwarded to the parent PF as required, either
+ * because the PF is down or otherwise doesn't have an appropriate
+ * async completion ring or associated forwarding buffers configured.
+ */
+ #define HWRM_ERR_CODE_PF_UNAVAILABLE UINT32_C(0x12)
/*
* This value indicates that the HWRM response is in TLV format and
* should be interpreted as one or more TLVs starting with the
#define HWRM_TARGET_ID_TOOLS 0xFFFD
#define HWRM_VERSION_MAJOR 1
#define HWRM_VERSION_MINOR 10
-#define HWRM_VERSION_UPDATE 1
+#define HWRM_VERSION_UPDATE 2
/* non-zero means beta version */
-#define HWRM_VERSION_RSVD 56
-#define HWRM_VERSION_STR "1.10.1.56"
+#define HWRM_VERSION_RSVD 44
+#define HWRM_VERSION_STR "1.10.2.44"
/****************
* hwrm_ver_get *
* If set to 1, it will indicate to host drivers that firmware is
* not ready to start full blown HWRM commands. Host drivers should
* re-try HWRM_VER_GET with some timeout period. The timeout period
- * can be selected up to 5 seconds.
+ * can be selected up to 5 seconds. Host drivers should also check
+ * for dev_not_rdy_backing_store to identify if flag is set due to
+ * backing store not been available.
* For Example, PCIe hot-plug:
* Hot plug timing is system dependent. It generally takes up to
* 600 miliseconds for firmware to clear DEV_NOT_RDY flag.
* If set to 0, device is ready to accept all HWRM commands.
*/
- #define HWRM_VER_GET_OUTPUT_FLAGS_DEV_NOT_RDY UINT32_C(0x1)
+ #define HWRM_VER_GET_OUTPUT_FLAGS_DEV_NOT_RDY \
+ UINT32_C(0x1)
/*
* If set to 1, external version present.
* If set to 0, external version not present.
*/
- #define HWRM_VER_GET_OUTPUT_FLAGS_EXT_VER_AVAIL UINT32_C(0x2)
+ #define HWRM_VER_GET_OUTPUT_FLAGS_EXT_VER_AVAIL \
+ UINT32_C(0x2)
+ /*
+ * Firmware sets this flag along with dev_not_rdy flag to indicate
+ * host drivers that it has not completed resource initialization
+ * required for data path operations. Host drivers should not send
+ * any HWRM command that requires data path resources. Firmware will
+ * fail those commands with HWRM_ERR_CODE_BUSY. Host drivers can retry
+ * those commands once both the flags are cleared.
+ * If this flag and dev_not_rdy flag are set to 0, device is ready
+ * to accept all HWRM commands.
+ */
+ #define HWRM_VER_GET_OUTPUT_FLAGS_DEV_NOT_RDY_BACKING_STORE \
+ UINT32_C(0x4)
uint8_t unused_0[2];
/*
* For backward compatibility this field must be set to 1.
* used with the short cmd request format.
*/
uint16_t max_ext_req_len;
- uint8_t unused_1[5];
+ /*
+ * This field returns the maximum request timeout value in seconds.
+ * For backward compatibility, a value of zero should be interpreted
+ * as the default value of 40 seconds. Drivers should always honor the
+ * maximum timeout, but are permitted to warn if a longer duration than
+ * this default is advertised. Values larger than 40 seconds should
+ * only be used as a stopgap measure to address a device limitation or
+ * for the purposes of test and debugging. The long term goal is for
+ * firmware to significantly reduce this value in the passage of time.
+ */
+ uint16_t max_req_timeout;
+ uint8_t unused_1[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
uint8_t valid;
} __rte_packed;
+/* cfa_bds_read_cmd_data_msg (size:128b/16B) */
+struct cfa_bds_read_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /*
+ * This is read command. From 32 to 128B can be read from a table
+ * using this command.
+ */
+ #define CFA_BDS_READ_CMD_DATA_MSG_OPCODE_READ UINT32_C(0x0)
+ #define CFA_BDS_READ_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_READ_CMD_DATA_MSG_OPCODE_READ
+ /* This value selects the table type to be acted upon. */
+ uint8_t table_type;
+ /* This value selects the table type to be acted upon. */
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf)
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_SFT 0
+ /* This command acts on the action table of the specified scope. */
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_ACTION UINT32_C(0x0)
+ /* This command acts on the exact match table of the specified scope. */
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_EM UINT32_C(0x1)
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_LAST \
+ CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_EM
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ /*
+ * This value identifies the number of 32B units will be accessed. A
+ * value of zero is invalid. Maximum value is 4.
+ */
+ uint8_t data_size;
+ #define CFA_BDS_READ_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7)
+ #define CFA_BDS_READ_CMD_DATA_MSG_DATA_SIZE_SFT 0
+ /* This is the 32B index into the selected table to access. */
+ uint32_t table_index;
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_INDEX_MASK UINT32_C(0x3ffffff)
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_INDEX_SFT 0
+ /*
+ * This is the 64b host address where you want the data returned to. The
+ * data will be written to the same function as the one that owns the SQ
+ * this command is read from. The bottom two bits of this value must be
+ * zero. The size of the write is controlled by the data_size field.
+ */
+ uint64_t host_address;
+} __rte_packed;
+
+/* cfa_bds_write_cmd_data_msg (size:1152b/144B) */
+struct cfa_bds_write_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /*
+ * This is write command. From 32 to 128B can be written to a table
+ * using this command.
+ */
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_OPCODE_WRITE UINT32_C(0x1)
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_WRITE_CMD_DATA_MSG_OPCODE_WRITE
+ /* This value selects the table type to be acted upon. */
+ uint8_t write_thru_table_type;
+ /* This value selects the table type to be acted upon. */
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf)
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_SFT 0
+ /* This command acts on the action table of the specified scope. */
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_ACTION UINT32_C(0x0)
+ /* This command acts on the exact match table of the specified scope. */
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_EM UINT32_C(0x1)
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_LAST \
+ CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_EM
+ /*
+ * Indicates write-through control. Indicates write-through when set,
+ * or write back when cleared.
+ */
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_WRITE_THRU UINT32_C(0x10)
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ /*
+ * This value identifies the number of 32B units will be accessed. A
+ * value of zero is invalid. Maximum value is 4.
+ */
+ uint8_t data_size;
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7)
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_DATA_SIZE_SFT 0
+ /* This is the 32B index into the selected table to access. */
+ uint32_t table_index;
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_INDEX_MASK UINT32_C(0x3ffffff)
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_INDEX_SFT 0
+ uint32_t unused0;
+ uint32_t unused1;
+ /*
+ * This is the data to be written. Data length is determined by the
+ * data_size field. The bd_cnt in the encapsulating BD must also be set
+ * correctly to ensure that the BD is processed correctly and the full
+ * WRITE_CMD message is extracted from the BD.
+ */
+ uint32_t dta[32];
+} __rte_packed;
+
+/* cfa_bds_read_clr_cmd_data_msg (size:256b/32B) */
+struct cfa_bds_read_clr_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /*
+ * This is read-clear command. 32B can be read from a table and
+ * a 16b mask can be used to clear specific 16b units after the
+ * read as an atomic operation.
+ */
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_OPCODE_READ_CLR UINT32_C(0x2)
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_READ_CLR_CMD_DATA_MSG_OPCODE_READ_CLR
+ /* This value selects the table type to be acted upon. */
+ uint8_t table_type;
+ /* This value selects the table type to be acted upon. */
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf)
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_SFT 0
+ /* This command acts on the action table of the specified scope. */
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_ACTION UINT32_C(0x0)
+ /* This command acts on the exact match table of the specified scope. */
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_EM UINT32_C(0x1)
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_LAST \
+ CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_EM
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ /*
+ * This value identifies the number of 32B units will be accessed.
+ * Always set the value to 1.
+ */
+ uint8_t data_size;
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7)
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_DATA_SIZE_SFT 0
+ /* This is the 32B index into the selected table to access. */
+ uint32_t table_index;
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_INDEX_MASK \
+ UINT32_C(0x3ffffff)
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_INDEX_SFT 0
+ /*
+ * This is the 64b host address where you want the data returned to. The
+ * data will be written to the same function as the one that owns the SQ
+ * this command is read from. The bottom two bits of this value must be
+ * zero. The size of the write is controlled by the data_size field.
+ */
+ uint64_t host_address;
+ /*
+ * This is active high clear mask for the 32B of data that this command
+ * can read. Bit 0 of the field will clear bits 15:0 of the first word
+ * of data read when set to '1'.
+ */
+ uint16_t clear_mask;
+ uint16_t unused0[3];
+ uint16_t unused1[4];
+} __rte_packed;
+
+/* cfa_bds_em_insert_cmd_data_msg (size:1152b/144B) */
+struct cfa_bds_em_insert_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /*
+ * An exact match table insert will be attempted into the table.
+ * If there is a free location in the bucket, the payload will
+ * be written to the bucket.
+ */
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_OPCODE_EM_INSERT UINT32_C(0x3)
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_EM_INSERT_CMD_DATA_MSG_OPCODE_EM_INSERT
+ /*
+ * Indicates write-through control. Indicates write-through when set,
+ * or write back when cleared.
+ */
+ uint8_t write_thru;
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_UNUSED_MASK UINT32_C(0xf)
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_UNUSED_SFT 0
+ /*
+ * Indicates write-through control. Indicates write-through when set,
+ * or write back when cleared.
+ */
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_WRITE_THRU UINT32_C(0x10)
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ /*
+ * This value identifies the number of 32B units will be accessed. A
+ * value of zero is invalid. Maximum value is 4.
+ */
+ uint8_t data_size;
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7)
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_DATA_SIZE_SFT 0
+ /* This is the 32B index into the selected table to access. */
+ uint32_t table_index;
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_TABLE_INDEX_MASK \
+ UINT32_C(0x3ffffff)
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_TABLE_INDEX_SFT 0
+ /*
+ * This is the 64b host address where you want the data returned to. The
+ * data will be written to the same function as the one that owns the SQ
+ */
+ uint64_t host_address;
+ /*
+ * This is the Exact Match Lookup Record. Data length is determined by
+ * the data_size field. The bd_cnt in the encapsulating BD must also be
+ */
+ uint32_t dta[32];
+} __rte_packed;
+
+/* cfa_bds_em_delete_cmd_data_msg (size:256b/32B) */
+struct cfa_bds_em_delete_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /* An exact match table delete will be attempted. */
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_OPCODE_EM_DELETE UINT32_C(0x4)
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_EM_DELETE_CMD_DATA_MSG_OPCODE_EM_DELETE
+ /*
+ * Indicates write-through control. Indicates write-through when set,
+ * or write back when cleared.
+ */
+ uint8_t write_thru;
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_UNUSED_MASK UINT32_C(0xf)
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_UNUSED_SFT 0
+ /*
+ * Indicates write-through control. Indicates write-through when set,
+ * or write back when cleared.
+ */
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_WRITE_THRU UINT32_C(0x10)
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ /*
+ * This value identifies the number of 32B units will be accessed. A
+ * value of zero is invalid. Maximum value is 4.
+ */
+ uint8_t data_size;
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7)
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_DATA_SIZE_SFT 0
+ uint32_t unused0;
+ /*
+ * This is the 64b host address where you want the data returned to. The
+ * data will be written to the same function as the one that owns the SQ
+ */
+ uint64_t host_address;
+ /*
+ * This is the Exact Match Lookup Record. Data length is determined by
+ * the data_size field. The bd_cnt in the encapsulating BD must also be
+ */
+ uint64_t dta;
+ uint32_t unused1[2];
+} __rte_packed;
+
+/* cfa_bds_invalidate_cmd_data_msg (size:128b/16B) */
+struct cfa_bds_invalidate_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /*
+ * The specified table area will be invalidated. If it is needed.
+ * again, it will be read from the backing store.
+ */
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_OPCODE_INVALIDATE UINT32_C(0x5)
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_INVALIDATE_CMD_DATA_MSG_OPCODE_INVALIDATE
+ /* This value selects the table type to be acted upon. */
+ uint8_t table_type;
+ /* This value selects the table type to be acted upon. */
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf)
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_SFT 0
+ /* This command acts on the action table of the specified scope. */
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_ACTION \
+ UINT32_C(0x0)
+ /* This command acts on the exact match table of the specified scope. */
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_EM \
+ UINT32_C(0x1)
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_LAST \
+ CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_EM
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ /* This value specifies the number of cache lines to invalidate. */
+ uint8_t data_size;
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7)
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_DATA_SIZE_SFT 0
+ /* This is the 32B index into the selected table to access. */
+ uint32_t table_index;
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_INDEX_MASK \
+ UINT32_C(0x3ffffff)
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_INDEX_SFT 0
+ uint32_t unused[2];
+} __rte_packed;
+
+/* cfa_bds_event_collect_cmd_data_msg (size:128b/16B) */
+struct cfa_bds_event_collect_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /* Reads notification messages from the Host Notification Queue. */
+ #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_OPCODE_EVENT_COLLECT \
+ UINT32_C(0x6)
+ #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_OPCODE_EVENT_COLLECT
+ uint8_t unused0;
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_TABLE_SCOPE_MASK \
+ UINT32_C(0x1f)
+ #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ /*
+ * This value identifies the number of 32B units will be accessed. A
+ * value of zero is invalid. Maximum value is 4.
+ */
+ uint8_t data_size;
+ #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7)
+ #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_DATA_SIZE_SFT 0
+ uint32_t unused1;
+ /*
+ * This is the 64b host address where you want the data returned to. The
+ * data will be written to the same function as the one that owns the SQ
+ */
+ uint64_t host_address;
+} __rte_packed;
+
+/* ce_bds_add_data_msg (size:512b/64B) */
+struct ce_bds_add_data_msg {
+ uint32_t version_algorithm_kid_opcode;
+ /*
+ * This value selects the operation for the mid-path command for the
+ * crypto blocks.
+ */
+ #define CE_BDS_ADD_DATA_MSG_OPCODE_MASK UINT32_C(0xf)
+ #define CE_BDS_ADD_DATA_MSG_OPCODE_SFT 0
+ /*
+ * This is the add command. Using this opcode, Host Driver can add
+ * information required for kTLS processing. The information is
+ * updated in the CFCK context.
+ */
+ #define CE_BDS_ADD_DATA_MSG_OPCODE_ADD UINT32_C(0x1)
+ #define CE_BDS_ADD_DATA_MSG_OPCODE_LAST \
+ CE_BDS_ADD_DATA_MSG_OPCODE_ADD
+ /*
+ * This field is the Crypto Context ID. The KID is used to store
+ * information used by the associated kTLS offloaded connection.
+ */
+ #define CE_BDS_ADD_DATA_MSG_KID_MASK \
+ UINT32_C(0xfffff0)
+ #define CE_BDS_ADD_DATA_MSG_KID_SFT 4
+ /*
+ * Currently only two algorithms are supported, AES_GCM_128 and
+ * AES_GCM_256. Additional bits for future growth.
+ */
+ #define CE_BDS_ADD_DATA_MSG_ALGORITHM_MASK \
+ UINT32_C(0xf000000)
+ #define CE_BDS_ADD_DATA_MSG_ALGORITHM_SFT 24
+ /* AES_GCM_128 Algorithm */
+ #define CE_BDS_ADD_DATA_MSG_ALGORITHM_AES_GCM_128 \
+ UINT32_C(0x1000000)
+ /* AES_GCM_256 Algorithm */
+ #define CE_BDS_ADD_DATA_MSG_ALGORITHM_AES_GCM_256 \
+ UINT32_C(0x2000000)
+ /*
+ * Version number of TLS connection. HW will provide registers that
+ * converts the 4b encoded version number to 16b of actual version
+ * number in the TLS Header. * Initialized --> By mid-path command *
+ * Updated --> Never though another mid-path command will result in an
+ * update.
+ */
+ #define CE_BDS_ADD_DATA_MSG_VERSION_MASK \
+ UINT32_C(0xf0000000)
+ #define CE_BDS_ADD_DATA_MSG_VERSION_SFT 28
+ /* TLS1.2 Version */
+ #define CE_BDS_ADD_DATA_MSG__TLS1_2 \
+ (UINT32_C(0x0) << 28)
+ /* TLS1.3 Version */
+ #define CE_BDS_ADD_DATA_MSG__TLS1_3 \
+ (UINT32_C(0x1) << 28)
+ #define CE_BDS_ADD_DATA_MSG__LAST \
+ CE_BDS_ADD_DATA_MSG__TLS1_3
+ /*
+ * Command Type in the TLS header. HW will provide registers that
+ * converts the 3b encoded command type to 8b of actual command type in
+ * the TLS Header. * Initialized --> By mid-path command * Updated -->
+ * Never though another mid-path command will result in an update
+ */
+ uint8_t cmd_type;
+ #define CE_BDS_ADD_DATA_MSG_CMD_TYPE_MASK UINT32_C(0x7)
+ #define CE_BDS_ADD_DATA_MSG_CMD_TYPE_SFT 0
+ /* Application */
+ #define CE_BDS_ADD_DATA_MSG_CMD_TYPE_APP UINT32_C(0x0)
+ #define CE_BDS_ADD_DATA_MSG_CMD_TYPE_LAST \
+ CE_BDS_ADD_DATA_MSG_CMD_TYPE_APP
+ uint8_t unused0[3];
+ /*
+ * Salt is part of the nonce that is used as the Initial Vector (IV) in
+ * AES-GCM cipher suites. These are exchanged as part of the handshake
+ * process and is either the client_write_iv (when the client is
+ * sending) or server_write_iv (when the server is sending). In
+ * TLS1.2, 4B of Salt is concatenated with 8B of explicit_nonce to
+ * generate the 12B of IV. In TLS1.3, 8B of TLS record sequence number
+ * is zero padded to 12B and then xor'ed with the 4B of salt to generate
+ * the 12B of IV. This value is initialized by this mid-path command.
+ */
+ uint32_t salt;
+ uint32_t unused1;
+ /*
+ * This field keeps track of the TCP sequence number that is expected as
+ * the first byte in the next TCP packet. This field is calculated by HW
+ * using the output of the parser. The field is initialized as part of
+ * the Mid-path BD download/update of a kTLS connection. For every TCP
+ * packet processed, TCE HW will update the value to Current packet TCP
+ * sequence number + Current packet TCP Payload Length.
+ */
+ uint32_t pkt_tcp_seq_num;
+ /*
+ * This field maintains the TCP sequence number of the first byte in the
+ * header of the active TLS record. This field is initialized as part of
+ * the Mid-path BD download/update of a kTLS connection. For every
+ * record that is processed, TCE HW copies the value from the
+ * next_tls_header_tcp_seq_num field.
+ */
+ uint32_t tls_header_tcp_seq_num;
+ /*
+ * This is sequence number for the TLS record in a particular session.
+ * In TLS1.2, record sequence number is part of the Associated Data (AD)
+ * in the AEAD algorithm. In TLS1.3, record sequence number is part of
+ * the Initial Vector (IV). The field is initialized as part of the
+ * mid-path BD download/update of a kTLS connection. TCE HW increments
+ * the field after that for every record processed as it parses the TCP
+ * packet.
+ */
+ uint32_t record_seq_num[2];
+ /*
+ * Key used for encrypting or decrypting TLS records. The Key is
+ * exchanged during the hand-shake protocol by the client-server and
+ * provided to HW through this mid-path BD.
+ */
+ uint32_t session_key[8];
+} __rte_packed;
+
+/* ce_bds_delete_data_msg (size:64b/8B) */
+struct ce_bds_delete_data_msg {
+ uint32_t kid_opcode;
+ /*
+ * This value selects the operation for the mid-path command for the
+ * crypto blocks.
+ */
+ #define CE_BDS_DELETE_DATA_MSG_OPCODE_MASK UINT32_C(0xf)
+ #define CE_BDS_DELETE_DATA_MSG_OPCODE_SFT 0
+ /*
+ * This is the delete command. Using this opcode, the host Driver
+ * can remove a key context from the CFCK. If context is deleted
+ * and packets with the same KID come through the pipeline, the
+ * following actions are taken. For transmit packets, no crypto
+ * operation will be performed, payload will be zero'ed out. For
+ * receive packets, no crypto operation will be performed,
+ * payload will be unmodified.
+ */
+ #define CE_BDS_DELETE_DATA_MSG_OPCODE_DELETE UINT32_C(0x2)
+ #define CE_BDS_DELETE_DATA_MSG_OPCODE_LAST \
+ CE_BDS_DELETE_DATA_MSG_OPCODE_DELETE
+ /*
+ * This field is the Crypto Context ID. The KID is used to store
+ * information used by the associated kTLS offloaded connection.
+ */
+ #define CE_BDS_DELETE_DATA_MSG_KID_MASK UINT32_C(0xfffff0)
+ #define CE_BDS_DELETE_DATA_MSG_KID_SFT 4
+ uint32_t unused0;
+} __rte_packed;
+
+/* ce_bds_resync_resp_ack_msg (size:128b/16B) */
+struct ce_bds_resync_resp_ack_msg {
+ uint32_t resync_status_kid_opcode;
+ /*
+ * This value selects the operation for the mid-path command for the
+ * crypto blocks.
+ */
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_MASK UINT32_C(0xf)
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_SFT 0
+ /*
+ * This command is used by the driver as a response to the resync
+ * request sent by the crypto engine.
+ */
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_RESYNC UINT32_C(0x3)
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_LAST \
+ CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_RESYNC
+ /*
+ * This field is the Crypto Context ID. The KID is used to store
+ * information used by the associated kTLS offloaded connection.
+ */
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_KID_MASK UINT32_C(0xfffff0)
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_KID_SFT 4
+ /*
+ * This field indicates if the resync request resulted in a success or
+ * a failure.
+ */
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_RESYNC_STATUS \
+ UINT32_C(0x1000000)
+ /*
+ * An ACK indicates that the driver was able to find the TLS record
+ * associated with TCP sequence number provided by the HW
+ */
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_RESYNC_STATUS_ACK \
+ (UINT32_C(0x0) << 24)
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_RESYNC_STATUS_LAST \
+ CE_BDS_RESYNC_RESP_ACK_MSG_RESYNC_STATUS_ACK
+ /*
+ * This field is the echo of the TCP sequence number provided in the
+ * resync request by the HW. If HW sent multiple resync requests, it
+ * only tracks the latest TCP sequence number. When the response from
+ * the Driver doesn't match the latest request, HW will drop the resync
+ * response.
+ */
+ uint32_t resync_record_tcp_seq_num;
+ /*
+ * This field indicates the TLS record sequence number associated with
+ * the resync request. HW will take this number and add the delta records
+ * it has found since sending the resync request, update the context and
+ * resume decrypting records.
+ */
+ uint32_t resync_record_seq_num[2];
+} __rte_packed;
+
+/* ce_bds_resync_resp_nack_msg (size:64b/8B) */
+struct ce_bds_resync_resp_nack_msg {
+ uint32_t resync_status_kid_opcode;
+ /*
+ * This value selects the operation for the mid-path command for the
+ * crypto blocks.
+ */
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_MASK UINT32_C(0xf)
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_SFT 0
+ /*
+ * This command is used by the driver as a response to the resync
+ * request sent by the crypto engine.
+ */
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_RESYNC UINT32_C(0x3)
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_LAST \
+ CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_RESYNC
+ /*
+ * This field is the Crypto Context ID. The KID is used to store
+ * information used by the associated kTLS offloaded connection.
+ */
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_KID_MASK \
+ UINT32_C(0xfffff0)
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_KID_SFT 4
+ /*
+ * This field indicates if the resync request resulted in a success or
+ * a failure.
+ */
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_RESYNC_STATUS \
+ UINT32_C(0x1000000)
+ /*
+ * An NAK indicates that the driver wasn't able to find the TLS
+ * record associated with TCP sequence number provided by the HW
+ */
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_RESYNC_STATUS_NACK \
+ (UINT32_C(0x1) << 24)
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_RESYNC_STATUS_LAST \
+ CE_BDS_RESYNC_RESP_NACK_MSG_RESYNC_STATUS_NACK
+ /*
+ * This field is the echo of the TCP sequence number provided in the
+ * resync request by the HW. If HW sent multiple resync requests, it
+ * only tracks the latest TCP sequence number. When the response from
+ * the Driver doesn't match the latest request, HW will drop the resync
+ * response.
+ */
+ uint32_t resync_record_tcp_seq_num;
+} __rte_packed;
+
+/* crypto_presync_bd_cmd (size:256b/32B) */
+struct crypto_presync_bd_cmd {
+ uint8_t flags;
+ /*
+ * Typically, presync BDs are used for packet retransmissions. Source
+ * port sends all the packets in order over the network to destination
+ * port and packets get dropped in the network. The destination port
+ * will request retranmission of dropped packets and source port driver
+ * will send presync BD to setup the transmitter appropriately. It will
+ * provide the start and end TCP sequence number of the data to be
+ * transmitted. HW keeps two sets of context variable, one for in order
+ * traffic and one for retransmission traffic. HW is designed to
+ * transmit everything posted in the presync BD and return to in order
+ * mode after that. No inorder context variables are updated in the
+ * process. There is a special case where packets can be dropped
+ * between the TCP stack and Device Driver (Berkeley Packet Filter for
+ * ex) and HW still needs to transmit rest of the traffic. In this
+ * mode, driver will send a presync BD as if it is a retransmission but
+ * at the end of the transmission, the in order variables need to be
+ * updated. This flag is used by driver to indicate that in order
+ * variables needs to be updated at the end of completing the task
+ * associated with the presync BD.
+ */
+ #define CRYPTO_PRESYNC_BD_CMD_FLAGS_UPDATE_IN_ORDER_VAR \
+ UINT32_C(0x1)
+ uint8_t unused0;
+ uint16_t unused1;
+ /*
+ * This field maintains the TCP sequence number of the first byte in the
+ * Header of the active TLS record. This field is set to 0 during
+ * mid-path BD updates, but is set to correct value when a presync BD is
+ * detected. For every record that is processed, the value from the
+ * next_tls_header_tcp_seq_num field is copied.
+ */
+ uint32_t header_tcp_seq_num;
+ /*
+ * When a retransmitted packet has a TLS authentication TAG present and
+ * the data spans multiple TCP Packets, HW is required to read the entire
+ * record to recalculate the TAG but only transmit what is required. This
+ * field is the start TCP sequence number of the packet(s) that need to
+ * be re-transmitted. This field is initialized to 0 during Mid-path BD
+ * add command and initialized to value provided by the driver when
+ * Pre-sync BD is detected. This field is never updated unless another
+ * Pre-sync BD signaling a new retransmission is scheduled.
+ */
+ uint32_t start_tcp_seq_num;
+ /*
+ * When a retransmitted packet has a TLS authentication TAG present and
+ * the data spans multiple TCP Packets, HW is required to read the
+ * entire record to recalculate the TAG but only transmit what is
+ * required. This field is the end TCP sequence number of the packet(s)
+ * that need to be re-transmitted. This field is initialized to 0 during
+ * Mid-path BD add command and initialized to value provided by the
+ * driver when Pre-sync BD is detected. This field is never updated
+ * unless another Pre-sync BD signaling a new retransmission is
+ * scheduled.
+ */
+ uint32_t end_tcp_seq_num;
+ /*
+ * For TLS1.2, an explicit nonce is used as part of the IV (concatenated
+ * with the SALT). For retans packets, this field is extracted from the
+ * TLS record, field right after the TLS Header and stored in the
+ * context. This field needs to be stored in context as TCP segmentation
+ * could have split the field into multiple TCP packets. This value is
+ * initialized to 0 when presync BD is detected by taking the value from
+ * the first TLS header. When subsequent TLS Headers are detected, the
+ * value is extracted from packet.
+ */
+ uint32_t explicit_nonce[2];
+ /*
+ * This is sequence number for the TLS record in a particular session. In
+ * TLS1.2, record sequence number is part of the Associated Data (AD) in
+ * the AEAD algorithm. In TLS1.3, record sequence number is part of the
+ * Initial Vector (IV). The field is initialized to 0 during Mid-path BD
+ * download. Is initialized to correct value when a pre-sync BD is
+ * detected. TCE HW increments the field after that for every record
+ * processed as it parses the TCP packet. Subsequent pre-sync BDs
+ * delivering more retransmission instruction will also update this
+ * field.
+ */
+ uint32_t record_seq_num[2];
+} __rte_packed;
+
/* bd_base (size:64b/8B) */
struct bd_base {
uint8_t type;
* RX Producer Assembly Buffer Descriptor.
*/
#define BD_BASE_TYPE_RX_PROD_AGG UINT32_C(0x6)
+ /*
+ * Indicates that this BD is used to issue a command to one of
+ * the mid-path destinations.
+ */
+ #define BD_BASE_TYPE_TX_BD_MP_CMD UINT32_C(0x8)
+ /*
+ * Indicates that this BD is used to issue a cryptographic pre-
+ * sync command through the fast path and destined for TCE.
+ */
+ #define BD_BASE_TYPE_TX_BD_PRESYNC_CMD UINT32_C(0x9)
/*
* Indicates that this BD is 32B long and is used for
* normal L2 packet transmission.
* used for any data that the driver wants to associate with the
* transmit BD.
*
- * This field must be valid on the first BD of a packet.
+ * This field must be valid on the first BD of a packet. If completion
+ * coalescing is enabled on the TX ring, it is suggested that the driver
+ * populate the opaque field to indicate the specific TX ring with which
+ * the completion is associated, then utilize the opaque and sq_cons_idx
+ * fields in the coalesced completion record to determine the specific
+ * packets that are to be completed on that ring.
*/
uint32_t opaque;
/*
*/
uint16_t len;
/*
- * The opaque data field is pass through to the completion and can be
+ * The opaque data field is passed through to the completion and can be
* used for any data that the driver wants to associate with the
* transmit BD.
*
- * This field must be valid on the first BD of a packet.
+ * This field must be valid on the first BD of a packet. If completion
+ * coalescing is enabled on the TX ring, it is suggested that the driver
+ * populate the opaque field to indicate the specific TX ring with which
+ * the completion is associated, then utilize the opaque and sq_cons_idx
+ * fields in the coalesced completion record to determine the specific
+ * packets that are to be completed on that ring.
*/
uint32_t opaque;
/*
#define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4)
/*
* If set to 1, the device will record the time at which the packet
- * was actually transmitted at the TX MAC.
+ * was actually transmitted at the TX MAC for 2-step time sync.
*
* This bit must be valid on the first BD of a packet.
*/
* Send Offload) processing for both normal or encapsulated
* packets, which is a form of TCP segmentation. When this bit
* is 1, the hdr_size and mss fields must be valid. The driver
- * doesn't need to set t_ip_chksum, ip_chksum, and tcp_udp_chksum
- * flags since the controller will replace the appropriate
- * checksum fields for segmented packets.
+ * doesn't need to set ot_ip_chksum, t_ip_chksum, ip_chksum, and
+ * tcp_udp_chksum flags since the controller will replace the
+ * appropriate checksum fields for segmented packets.
*
* When this bit is 1, the hdr_size and mss fields must be valid.
*/
* packet. Packet must be a valid FCoE format packet.
*/
#define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200)
- uint16_t hdr_size;
+ /*
+ * If set to '1', then the timestamp from the BD is used. If cleared
+ * to 0, then TWE provides the timestamp.
+ */
+ #define TX_BD_LONG_LFLAGS_BD_TS_EN UINT32_C(0x400)
+ /*
+ * If set to '1', this operation will cause a trace capture in each
+ * block it passes through.
+ */
+ #define TX_BD_LONG_LFLAGS_DEBUG_TRACE UINT32_C(0x800)
+ /*
+ * If set to '1', the device will record the time at which the packet
+ * was actually transmitted at the TX MAC for 1-step time sync. This
+ * bit must be valid on the first BD of a packet.
+ */
+ #define TX_BD_LONG_LFLAGS_STAMP_1STEP UINT32_C(0x1000)
+ /*
+ * If set to '1', the controller replaces the Outer-tunnel IP checksum
+ * field with hardware calculated IP checksum for the IP header of the
+ * packet associated with this descriptor. For outer UDP checksum, it
+ * will be the following behavior for all cases independent of settings
+ * of inner LSO and checksum offload BD flags. If outer UDP checksum
+ * is 0, then do not update it. If outer UDP checksum is non zero, then
+ * the hardware should compute and update it.
+ */
+ #define TX_BD_LONG_LFLAGS_OT_IP_CHKSUM UINT32_C(0x2000)
+ /*
+ * If set to zero when LSO is '1', then the IPID of the Outer-tunnel IP
+ * header will not be modified during LSO operations. If set to one
+ * when LSO is '1', then the IPID of the Outer-tunnel IP header will be
+ * incremented for each subsequent segment of an LSO operation. The
+ * flag is ignored if the LSO packet is a normal (non-tunneled) TCP
+ * packet.
+ */
+ #define TX_BD_LONG_LFLAGS_OT_IPID UINT32_C(0x4000)
+ /*
+ * If set to '1', When set to 1, KTLS encryption will be enabled for
+ * the packet.
+ */
+ #define TX_BD_LONG_LFLAGS_CRYPTO_EN UINT32_C(0x8000)
+ uint16_t kid_or_ts_low_hdr_size;
/*
* When LSO is '1', this field must contain the offset of the
* TCP payload from the beginning of the packet in as
*
* This value must be valid on the first BD of a packet.
*/
- #define TX_BD_LONG_HDR_SIZE_MASK UINT32_C(0x1ff)
- #define TX_BD_LONG_HDR_SIZE_SFT 0
- uint32_t mss;
+ #define TX_BD_LONG_HDR_SIZE_MASK UINT32_C(0x1ff)
+ #define TX_BD_LONG_HDR_SIZE_SFT 0
+ /*
+ * If lflags.bd_ts_en is 1, this is the lower 7 bits of the 24-bit
+ * timestamp. If lflags.crypto_en is 1, this is the lower 7 bits of the
+ * 20-bit KID.
+ */
+ #define TX_BD_LONG_KID_OR_TS_LOW_MASK UINT32_C(0xfe00)
+ #define TX_BD_LONG_KID_OR_TS_LOW_SFT 9
+ uint32_t kid_or_ts_high_mss;
/*
* This is the MSS value that will be used to do the LSO processing.
* The value is the length in bytes of the TCP payload for each
*
* This value must be valid on the first BD of a packet.
*/
- #define TX_BD_LONG_MSS_MASK UINT32_C(0x7fff)
- #define TX_BD_LONG_MSS_SFT 0
- uint16_t unused2;
+ #define TX_BD_LONG_MSS_MASK UINT32_C(0x7fff)
+ #define TX_BD_LONG_MSS_SFT 0
+ /*
+ * If lflags.bd_ts_en is 1, this is the upper 17 bits of the 24-bit
+ * timestamp. If lflags.crypto_en is 1, the least significant 13 bits
+ * of this field contain the upper 13 bits of the 20-bit KID.
+ */
+ #define TX_BD_LONG_KID_OR_TS_HIGH_MASK UINT32_C(0xffff8000)
+ #define TX_BD_LONG_KID_OR_TS_HIGH_SFT 15
+ /*
+ * This value selects bits 25:16 of the CFA action to perform on the
+ * packet. See the cfa_action field for more information.
+ */
+ uint16_t cfa_action_high;
+ #define TX_BD_LONG_CFA_ACTION_HIGH_MASK UINT32_C(0x3ff)
+ #define TX_BD_LONG_CFA_ACTION_HIGH_SFT 0
/*
* This value selects a CFA action to perform on the packet.
* Set this value to zero if no CFA action is desired.
*/
uint32_t cfa_meta;
/* When key=1, This is the VLAN tag VID value. */
- #define TX_BD_LONG_CFA_META_VLAN_VID_MASK UINT32_C(0xfff)
- #define TX_BD_LONG_CFA_META_VLAN_VID_SFT 0
+ #define TX_BD_LONG_CFA_META_VLAN_VID_MASK UINT32_C(0xfff)
+ #define TX_BD_LONG_CFA_META_VLAN_VID_SFT 0
/* When key=1, This is the VLAN tag DE value. */
- #define TX_BD_LONG_CFA_META_VLAN_DE UINT32_C(0x1000)
+ #define TX_BD_LONG_CFA_META_VLAN_DE UINT32_C(0x1000)
/* When key=1, This is the VLAN tag PRI value. */
- #define TX_BD_LONG_CFA_META_VLAN_PRI_MASK UINT32_C(0xe000)
- #define TX_BD_LONG_CFA_META_VLAN_PRI_SFT 13
+ #define TX_BD_LONG_CFA_META_VLAN_PRI_MASK UINT32_C(0xe000)
+ #define TX_BD_LONG_CFA_META_VLAN_PRI_SFT 13
/* When key=1, This is the VLAN tag TPID select value. */
- #define TX_BD_LONG_CFA_META_VLAN_TPID_MASK UINT32_C(0x70000)
- #define TX_BD_LONG_CFA_META_VLAN_TPID_SFT 16
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_MASK UINT32_C(0x70000)
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_SFT 16
/* 0x88a8 */
- #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID88A8 (UINT32_C(0x0) << 16)
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID88A8 \
+ (UINT32_C(0x0) << 16)
/* 0x8100 */
- #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID8100 (UINT32_C(0x1) << 16)
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID8100 \
+ (UINT32_C(0x1) << 16)
/* 0x9100 */
- #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9100 (UINT32_C(0x2) << 16)
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9100 \
+ (UINT32_C(0x2) << 16)
/* 0x9200 */
- #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9200 (UINT32_C(0x3) << 16)
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9200 \
+ (UINT32_C(0x3) << 16)
/* 0x9300 */
- #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9300 (UINT32_C(0x4) << 16)
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9300 \
+ (UINT32_C(0x4) << 16)
/* Value programmed in CFA VLANTPID register. */
- #define TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG (UINT32_C(0x5) << 16)
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG \
+ (UINT32_C(0x5) << 16)
#define TX_BD_LONG_CFA_META_VLAN_TPID_LAST \
TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG
/* When key=1, This is the VLAN tag TPID select value. */
- #define TX_BD_LONG_CFA_META_VLAN_RESERVED_MASK UINT32_C(0xff80000)
- #define TX_BD_LONG_CFA_META_VLAN_RESERVED_SFT 19
+ #define TX_BD_LONG_CFA_META_VLAN_RESERVED_MASK UINT32_C(0xff80000)
+ #define TX_BD_LONG_CFA_META_VLAN_RESERVED_SFT 19
/*
* This field identifies the type of edit to be performed
* on the packet.
*
* This value must be valid on the first BD of a packet.
*/
- #define TX_BD_LONG_CFA_META_KEY_MASK UINT32_C(0xf0000000)
- #define TX_BD_LONG_CFA_META_KEY_SFT 28
+ #define TX_BD_LONG_CFA_META_KEY_MASK UINT32_C(0xf0000000)
+ #define TX_BD_LONG_CFA_META_KEY_SFT 28
/* No editing */
- #define TX_BD_LONG_CFA_META_KEY_NONE (UINT32_C(0x0) << 28)
+ #define TX_BD_LONG_CFA_META_KEY_NONE \
+ (UINT32_C(0x0) << 28)
/*
* - meta[17:16] - TPID select value (0 = 0x8100).
* - meta[15:12] - PRI/DE value.
* - meta[11:0] - VID value.
*/
- #define TX_BD_LONG_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28)
+ #define TX_BD_LONG_CFA_META_KEY_VLAN_TAG \
+ (UINT32_C(0x1) << 28)
+ /*
+ * Provide metadata
+ * - Wh+/SR - this option is not supported.
+ * - Thor - cfa_meta[15:0] is used for metadata output if en_bd_meta
+ * is set in the Lookup Table.
+ * - SR2 - {4’d0, cfa_meta[27:0]} is used for metadata output if
+ * en_bd_meta is set in the Lookup Table.
+ */
+ #define TX_BD_LONG_CFA_META_KEY_METADATA_TRANSFER \
+ (UINT32_C(0x2) << 28)
#define TX_BD_LONG_CFA_META_KEY_LAST \
- TX_BD_LONG_CFA_META_KEY_VLAN_TAG
+ TX_BD_LONG_CFA_META_KEY_METADATA_TRANSFER
} __rte_packed;
/*
/*
* The opaque data field is passed through to the completion and can be
* used for any data that the driver wants to associate with the transmit
- * BD.
+ * BD. This field must be valid on the first BD of a packet. If
+ * completion coalescing is enabled on the TX ring, it is suggested that
+ * the driver populate the opaque field to indicate the specific TX ring
+ * with which the completion is associated, then utilize the opaque and
+ * sq_cons_idx fields in the coalesced completion record to determine
+ * the specific packets that are to be completed on that ring.
*
* This field must be valid on the first BD of a packet.
*/
#define TX_BD_LONG_INLINE_LFLAGS_NOCRC UINT32_C(0x4)
/*
* If set to 1, the device will record the time at which the packet
- * was actually transmitted at the TX MAC.
+ * was actually transmitted at the TX MAC for 2-step time sync. This
+ * bit must be valid on the first BD of a packet.
*/
#define TX_BD_LONG_INLINE_LFLAGS_STAMP UINT32_C(0x8)
/*
* packet. Packet must be a valid FCoE format packet.
*/
#define TX_BD_LONG_INLINE_LFLAGS_FCOE_CRC UINT32_C(0x200)
- uint16_t unused2;
- uint32_t unused3;
- uint16_t unused4;
+ /*
+ * If set to '1', then the timestamp from the BD is used. If cleared
+ * to 0, then TWE provides the timestamp.
+ */
+ #define TX_BD_LONG_INLINE_LFLAGS_BD_TS_EN UINT32_C(0x400)
+ /*
+ * If set to '1', this operation will cause a trace capture in each
+ * block it passes through.
+ */
+ #define TX_BD_LONG_INLINE_LFLAGS_DEBUG_TRACE UINT32_C(0x800)
+ /*
+ * If set to '1', the device will record the time at which the packet
+ * was actually transmitted at the TX MAC for 1-step time sync. This
+ * bit must be valid on the first BD of a packet.
+ */
+ #define TX_BD_LONG_INLINE_LFLAGS_STAMP_1STEP UINT32_C(0x1000)
+ /*
+ * If set to '1', the controller replaces the Outer-tunnel IP checksum
+ * field with hardware calculated IP checksum for the IP header of the
+ * packet associated with this descriptor. For outer UDP checksum, it
+ * will be the following behavior for all cases independent of settings
+ * of inner LSO and checksum offload BD flags. If outer UDP checksum
+ * is 0, then do not update it. If outer UDP checksum is non zero, then
+ * the hardware should compute and update it.
+ */
+ #define TX_BD_LONG_INLINE_LFLAGS_OT_IP_CHKSUM UINT32_C(0x2000)
+ /*
+ * If set to zero when LSO is '1', then the IPID of the Outer-tunnel IP
+ * header will not be modified during LSO operations. If set to one
+ * when LSO is '1', then the IPID of the Outer-tunnel IP header will be
+ * incremented for each subsequent segment of an LSO operation. The
+ * flag is ignored if the LSO packet is a normal (non-tunneled) TCP
+ * packet.
+ */
+ #define TX_BD_LONG_INLINE_LFLAGS_OT_IPID UINT32_C(0x4000)
+ /*
+ * If set to '1', When set to 1, KTLS encryption will be enabled for
+ * the packet.
+ */
+ #define TX_BD_LONG_INLINE_LFLAGS_CRYPTO_EN UINT32_C(0x8000)
+ uint8_t unused2;
+ uint8_t kid_or_ts_low;
+ #define TX_BD_LONG_INLINE_UNUSED UINT32_C(0x1)
+ /*
+ * If lflags.bd_ts_en is 1, this is the lower 7 bits of the 24-bit
+ * timestamp. If lflags.crypto_en is 1, this is the lower 7 bits of
+ * the 20-bit KID.
+ */
+ #define TX_BD_LONG_INLINE_KID_OR_TS_LOW_MASK UINT32_C(0xfe)
+ #define TX_BD_LONG_INLINE_KID_OR_TS_LOW_SFT 1
+ uint32_t kid_or_ts_high;
+ #define TX_BD_LONG_INLINE_UNUSED_MASK UINT32_C(0x7fff)
+ #define TX_BD_LONG_INLINE_UNUSED_SFT 0
+ /*
+ * If lflags.bd_ts_en is 1, this is the upper 17 bits of the 24-bit
+ * timestamp. If lflags.crypto_en is 1, the least significant 13 bits
+ * of this field contain the upper 13 bits of the 20-bit KID.
+ */
+ #define TX_BD_LONG_INLINE_KID_OR_TS_HIGH_MASK UINT32_C(0xffff8000)
+ #define TX_BD_LONG_INLINE_KID_OR_TS_HIGH_SFT 15
+ /*
+ * This value selects bits 25:16 of the CFA action to perform on the
+ * packet. See the cfa_action field for more information.
+ */
+ uint16_t cfa_action_high;
+ #define TX_BD_LONG_INLINE_CFA_ACTION_HIGH_MASK UINT32_C(0x3ff)
+ #define TX_BD_LONG_INLINE_CFA_ACTION_HIGH_SFT 0
/*
* This value selects a CFA action to perform on the packet.
* Set this value to zero if no CFA action is desired.
*/
uint32_t cfa_meta;
/* When key = 1, this is the VLAN tag VID value. */
- #define TX_BD_LONG_INLINE_CFA_META_VLAN_VID_MASK UINT32_C(0xfff)
- #define TX_BD_LONG_INLINE_CFA_META_VLAN_VID_SFT 0
+ #define TX_BD_LONG_INLINE_CFA_META_VLAN_VID_MASK UINT32_C(0xfff)
+ #define TX_BD_LONG_INLINE_CFA_META_VLAN_VID_SFT 0
/* When key = 1, this is the VLAN tag DE value. */
- #define TX_BD_LONG_INLINE_CFA_META_VLAN_DE UINT32_C(0x1000)
+ #define TX_BD_LONG_INLINE_CFA_META_VLAN_DE \
+ UINT32_C(0x1000)
/* When key = 1, this is the VLAN tag PRI value. */
- #define TX_BD_LONG_INLINE_CFA_META_VLAN_PRI_MASK UINT32_C(0xe000)
- #define TX_BD_LONG_INLINE_CFA_META_VLAN_PRI_SFT 13
+ #define TX_BD_LONG_INLINE_CFA_META_VLAN_PRI_MASK \
+ UINT32_C(0xe000)
+ #define TX_BD_LONG_INLINE_CFA_META_VLAN_PRI_SFT 13
/* When key = 1, this is the VLAN tag TPID select value. */
- #define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_MASK UINT32_C(0x70000)
- #define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_SFT 16
+ #define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_MASK \
+ UINT32_C(0x70000)
+ #define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_SFT 16
/* 0x88a8 */
#define TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_TPID88A8 \
(UINT32_C(0x0) << 16)
TX_BD_LONG_INLINE_CFA_META_VLAN_TPID_TPIDCFG
#define TX_BD_LONG_INLINE_CFA_META_VLAN_RESERVED_MASK \
UINT32_C(0xff80000)
- #define TX_BD_LONG_INLINE_CFA_META_VLAN_RESERVED_SFT 19
+ #define TX_BD_LONG_INLINE_CFA_META_VLAN_RESERVED_SFT 19
/*
* This field identifies the type of edit to be performed
* on the packet.
*/
#define TX_BD_LONG_INLINE_CFA_META_KEY_MASK \
UINT32_C(0xf0000000)
- #define TX_BD_LONG_INLINE_CFA_META_KEY_SFT 28
+ #define TX_BD_LONG_INLINE_CFA_META_KEY_SFT 28
/* No editing */
#define TX_BD_LONG_INLINE_CFA_META_KEY_NONE \
(UINT32_C(0x0) << 28)
*/
#define TX_BD_LONG_INLINE_CFA_META_KEY_VLAN_TAG \
(UINT32_C(0x1) << 28)
+ /*
+ * Provide metadata
+ * - Wh+/SR - this option is not supported.
+ * - Thor - cfa_meta[15:0] is used for metadata output if en_bd_meta
+ * is set in the Lookup Table.
+ * - SR2 - {4’d0, cfa_meta[27:0]} is used for metadata output if
+ * en_bd_meta is set in the Lookup Table.
+ */
+ #define TX_BD_LONG_INLINE_CFA_META_KEY_METADATA_TRANSFER \
+ (UINT32_C(0x2) << 28)
#define TX_BD_LONG_INLINE_CFA_META_KEY_LAST \
- TX_BD_LONG_INLINE_CFA_META_KEY_VLAN_TAG
+ TX_BD_LONG_INLINE_CFA_META_KEY_METADATA_TRANSFER
} __rte_packed;
/* tx_bd_empty (size:128b/16B) */
uint8_t unused_4[8];
} __rte_packed;
+/* tx_bd_mp_cmd (size:128b/16B) */
+struct tx_bd_mp_cmd {
+ /* Unless otherwise stated, sub-fields of this field are always valid. */
+ uint16_t flags_type;
+ /* This value identifies the type of buffer descriptor. */
+ #define TX_BD_MP_CMD_TYPE_MASK UINT32_C(0x3f)
+ #define TX_BD_MP_CMD_TYPE_SFT 0
+ /*
+ * Indicates that this BD is used to issue a command to one of
+ * the mid-path destinations.
+ */
+ #define TX_BD_MP_CMD_TYPE_TX_BD_MP_CMD UINT32_C(0x8)
+ #define TX_BD_MP_CMD_TYPE_LAST TX_BD_MP_CMD_TYPE_TX_BD_MP_CMD
+ #define TX_BD_MP_CMD_FLAGS_MASK UINT32_C(0xffc0)
+ #define TX_BD_MP_CMD_FLAGS_SFT 6
+ /* */
+ #define TX_BD_MP_CMD_FLAGS_UNUSED_MASK UINT32_C(0xc0)
+ #define TX_BD_MP_CMD_FLAGS_UNUSED_SFT 6
+ /*
+ * This value indicates the number of 16B BD locations (slots)
+ * consumed in the ring by this mid-path command BD, including the
+ * BD header and the command field.
+ */
+ #define TX_BD_MP_CMD_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
+ #define TX_BD_MP_CMD_FLAGS_BD_CNT_SFT 8
+ /*
+ * This value defines the length of command field in bytes. The maximum
+ * value shall be 496.
+ */
+ uint16_t len;
+ /*
+ * The opaque data field is pass through to the completion and can be
+ * used for any data that the driver wants to associate with this
+ * Tx mid-path command.
+ */
+ uint32_t opaque;
+ uint64_t unused1;
+} __rte_packed;
+
+/* tx_bd_presync_cmd (size:128b/16B) */
+struct tx_bd_presync_cmd {
+ /* Unless otherwise stated, sub-fields of this field are always valid. */
+ uint16_t flags_type;
+ /* This value identifies the type of buffer descriptor. */
+ #define TX_BD_PRESYNC_CMD_TYPE_MASK UINT32_C(0x3f)
+ #define TX_BD_PRESYNC_CMD_TYPE_SFT 0
+ /*
+ * Indicates that this BD is used to issue a cryptographic pre-
+ * sync command through the fast path and destined for TCE.
+ */
+ #define TX_BD_PRESYNC_CMD_TYPE_TX_BD_PRESYNC_CMD UINT32_C(0x9)
+ #define TX_BD_PRESYNC_CMD_TYPE_LAST \
+ TX_BD_PRESYNC_CMD_TYPE_TX_BD_PRESYNC_CMD
+ #define TX_BD_PRESYNC_CMD_FLAGS_MASK UINT32_C(0xffc0)
+ #define TX_BD_PRESYNC_CMD_FLAGS_SFT 6
+ /* */
+ #define TX_BD_PRESYNC_CMD_FLAGS_UNUSED_MASK UINT32_C(0xc0)
+ #define TX_BD_PRESYNC_CMD_FLAGS_UNUSED_SFT 6
+ /*
+ * This value indicates the number of 16B BD locations (slots)
+ * consumed in the ring by this pre-sync command BD, including the
+ * BD header and the command field.
+ */
+ #define TX_BD_PRESYNC_CMD_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
+ #define TX_BD_PRESYNC_CMD_FLAGS_BD_CNT_SFT 8
+ /*
+ * This value defines the length of command field in bytes. The maximum
+ * value shall be 496.
+ */
+ uint16_t len;
+ /*
+ * The opaque data field is pass through to TCE and can be used for
+ * debug.
+ */
+ uint32_t opaque;
+ /*
+ * This field is the Crypto Context ID to which the retransmit packet is
+ * applied. The KID references the context fields used by the
+ * associated kTLS offloaded connection.
+ */
+ uint32_t kid;
+ /*
+ * The KID value of all-ones is reserved for non-KTLS packets, which
+ * only implies that this value must not be used when filling this
+ * field for crypto packets.
+ */
+ #define TX_BD_PRESYNC_CMD_KID_VAL_MASK UINT32_C(0xfffff)
+ #define TX_BD_PRESYNC_CMD_KID_VAL_SFT 0
+ uint32_t unused_1;
+} __rte_packed;
+
/* rx_prod_pkt_bd (size:128b/16B) */
struct rx_prod_pkt_bd {
/* This value identifies the type of buffer descriptor. */
uint64_t address;
} __rte_packed;
+/* cfa_cmpls_cmp_data_msg (size:128b/16B) */
+struct cfa_cmpls_cmp_data_msg {
+ uint32_t mp_client_dma_length_opcode_status_type;
+ /*
+ * This field represents the Mid-Path client that generated the
+ * completion.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_TYPE_MASK UINT32_C(0x3f)
+ #define CFA_CMPLS_CMP_DATA_MSG_TYPE_SFT 0
+ /* Mid Path Short Completion with length = 16B. */
+ #define CFA_CMPLS_CMP_DATA_MSG_TYPE_MID_PATH_SHORT \
+ UINT32_C(0x1e)
+ #define CFA_CMPLS_CMP_DATA_MSG_TYPE_LAST \
+ CFA_CMPLS_CMP_DATA_MSG_TYPE_MID_PATH_SHORT
+ /* This value indicates the status for the command. */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_MASK UINT32_C(0x3c0)
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_SFT 6
+ /* Completed without error. */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_OK \
+ (UINT32_C(0x0) << 6)
+ /* Indicates an unsupported CFA opcode in the command. */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_UNSPRT_ERR \
+ (UINT32_C(0x1) << 6)
+ /*
+ * Indicates a CFA command formatting error. This error can occur on
+ * any of the supported CFA commands.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_FMT_ERR \
+ (UINT32_C(0x2) << 6)
+ /*
+ * Indicates an SVIF-Table scope error. This error can occur on any
+ * of the supported CFA commands.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_SCOPE_ERR \
+ (UINT32_C(0x3) << 6)
+ /*
+ * Indicates that the table_index is either outside of the
+ * table_scope range set by its EM_SIZE or, for EM Insert, it is in
+ * the static bucket range. This error can occur on EM Insert
+ * commands. It can also occur on Read, Read Clear, Write, and
+ * Invalidate commands if the table_type is EM.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_ADDR_ERR \
+ (UINT32_C(0x4) << 6)
+ /*
+ * Cache operation responded with an error. This error can occur on
+ * Read, Read Clear, Write, EM Insert, and EM Delete commands.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_CACHE_ERR \
+ (UINT32_C(0x5) << 6)
+ /*
+ * Indicates failure on EM Insert or EM Delete Command. Hash index
+ * and hash msb are returned in table_index and hash_msb fields.
+ * Dma_length is set to 1 if the bucket is also returned (as dma
+ * data).
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_EM_FAIL \
+ (UINT32_C(0x6) << 6)
+ /*
+ * Indicates no notifications were available on an Event Collection
+ * command.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_EVENT_COLLECT_FAIL \
+ (UINT32_C(0x7) << 6)
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_LAST \
+ CFA_CMPLS_CMP_DATA_MSG_STATUS_EVENT_COLLECT_FAIL
+ #define CFA_CMPLS_CMP_DATA_MSG_UNUSED0_MASK UINT32_C(0xc00)
+ #define CFA_CMPLS_CMP_DATA_MSG_UNUSED0_SFT 10
+ /* This is the opcode from the command. */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_MASK \
+ UINT32_C(0xff000)
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_SFT 12
+ /*
+ * This is read command. From 32 to 128B can be read from a table
+ * using this command.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_READ \
+ (UINT32_C(0x0) << 12)
+ /*
+ * This is write command. From 32 to 128B can be written to a table
+ * using this command.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_WRITE \
+ (UINT32_C(0x1) << 12)
+ /*
+ * This is read-clear command. 32B can be read from a table and a 16b
+ * mask can be used to clear specific 16b units after the read as an
+ * atomic operation.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_READ_CLR \
+ (UINT32_C(0x2) << 12)
+ /*
+ * An exact match table insert will be attempted into the table. If
+ * there is a free location in the bucket, the payload will be
+ * written to the bucket.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_EM_INSERT \
+ (UINT32_C(0x3) << 12)
+ /* An exact match table delete will be attempted. */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_EM_DELETE \
+ (UINT32_C(0x4) << 12)
+ /*
+ * The specified table area will be invalidated. If it is needed
+ * again, it will be read from the backing store.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_INVALIDATE \
+ (UINT32_C(0x5) << 12)
+ /* Reads notification messages from the Host Notification Queue. */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_EVENT_COLLECT \
+ (UINT32_C(0x6) << 12)
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_LAST \
+ CFA_CMPLS_CMP_DATA_MSG_OPCODE_EVENT_COLLECT
+ /*
+ * This field indicates the length of the DMA that accompanies the
+ * completion. Specified in units of DWords (32b). Valid values are
+ * between 0 and 128. A value of zero indicates that there is no DMA
+ * that accompanies the completion.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_DMA_LENGTH_MASK \
+ UINT32_C(0xff00000)
+ #define CFA_CMPLS_CMP_DATA_MSG_DMA_LENGTH_SFT 20
+ /*
+ * This field represents the Mid-Path client that generated the
+ * completion.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_MASK \
+ UINT32_C(0xf0000000)
+ #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_SFT 28
+ /* TX configrable flow processing block. */
+ #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_TE_CFA \
+ (UINT32_C(0x2) << 28)
+ /* RX configrable flow processing block. */
+ #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_RE_CFA \
+ (UINT32_C(0x3) << 28)
+ #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_LAST \
+ CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_RE_CFA
+ /*
+ * This is a copy of the opaque field from the mid path BD of this
+ * command.
+ */
+ uint32_t opaque;
+ uint16_t hash_msb_v;
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will
+ * write 1. The odd passes will write 0.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_V UINT32_C(0x1)
+ #define CFA_CMPLS_CMP_DATA_MSG_UNUSED1_MASK UINT32_C(0xe)
+ #define CFA_CMPLS_CMP_DATA_MSG_UNUSED1_SFT 1
+ /*
+ * This is the upper 12b of the hash, returned on Exact Match
+ * Insertion/Deletion Commands.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_HASH_MSB_MASK UINT32_C(0xfff0)
+ #define CFA_CMPLS_CMP_DATA_MSG_HASH_MSB_SFT 4
+ /* This is the table type from the command. */
+ uint8_t table_type;
+ #define CFA_CMPLS_CMP_DATA_MSG_UNUSED2_MASK UINT32_C(0xf)
+ #define CFA_CMPLS_CMP_DATA_MSG_UNUSED2_SFT 0
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf0)
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_SFT 4
+ /* This command acts on the action table of the specified scope. */
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_ACTION (UINT32_C(0x0) << 4)
+ /* This command acts on the exact match table of the specified scope. */
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_EM (UINT32_C(0x1) << 4)
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_LAST \
+ CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_EM
+ uint8_t table_scope;
+ /* This is the table scope from the command. */
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_SCOPE_SFT 0
+ uint32_t table_index;
+ /*
+ * This is the table index from the command (if it exists). However, if
+ * an Exact Match Insertion/Deletion command failed, then this is the
+ * table index of the calculated static hash bucket.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_INDEX_MASK UINT32_C(0x3ffffff)
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_INDEX_SFT 0
+} __rte_packed;
+
+/* CFA Mid-Path 32B DMA Message */
+/* cfa_dma32b_data_msg (size:256b/32B) */
+struct cfa_dma32b_data_msg {
+ /* DMA data value. */
+ uint32_t dta[8];
+} __rte_packed;
+
+/* CFA Mid-Path 64B DMA Message */
+/* cfa_dma64b_data_msg (size:512b/64B) */
+struct cfa_dma64b_data_msg {
+ /* DMA data value. */
+ uint32_t dta[16];
+} __rte_packed;
+
+/* CFA Mid-Path 96B DMA Message */
+/* cfa_dma96b_data_msg (size:768b/96B) */
+struct cfa_dma96b_data_msg {
+ /* DMA data value. */
+ uint32_t dta[24];
+} __rte_packed;
+
+/* CFA Mid-Path 128B DMA Message */
+/* cfa_dma128b_data_msg (size:1024b/128B) */
+struct cfa_dma128b_data_msg {
+ /* DMA data value. */
+ uint32_t dta[32];
+} __rte_packed;
+
+/* ce_cmpls_cmp_data_msg (size:128b/16B) */
+struct ce_cmpls_cmp_data_msg {
+ uint16_t status_subtype_type;
+ /*
+ * This field indicates the exact type of the completion. By
+ * convention, the LSB identifies the length of the record in 16B
+ * units. Even values indicate 16B records. Odd values indicate 32B
+ * records.
+ */
+ #define CE_CMPLS_CMP_DATA_MSG_TYPE_MASK UINT32_C(0x3f)
+ #define CE_CMPLS_CMP_DATA_MSG_TYPE_SFT 0
+ /* Completion of a Mid Path Command. Length = 16B */
+ #define CE_CMPLS_CMP_DATA_MSG_TYPE_MID_PATH_SHORT UINT32_C(0x1e)
+ #define CE_CMPLS_CMP_DATA_MSG_TYPE_LAST \
+ CE_CMPLS_CMP_DATA_MSG_TYPE_MID_PATH_SHORT
+ /*
+ * This value indicates the CE sub-type operation that is being
+ * completed.
+ */
+ #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_MASK UINT32_C(0x3c0)
+ #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_SFT 6
+ /* Completion Response for a Solicited Command. */
+ #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_SOLICITED (UINT32_C(0x0) << 6)
+ /* Error Completion (Unsolicited). */
+ #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_ERR (UINT32_C(0x1) << 6)
+ /* Re-Sync Completion (Unsolicited) */
+ #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_RESYNC (UINT32_C(0x2) << 6)
+ #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_LAST \
+ CE_CMPLS_CMP_DATA_MSG_SUBTYPE_RESYNC
+ /* This value indicates the status for the command. */
+ #define CE_CMPLS_CMP_DATA_MSG_STATUS_MASK UINT32_C(0x3c00)
+ #define CE_CMPLS_CMP_DATA_MSG_STATUS_SFT 10
+ /* Completed without error. */
+ #define CE_CMPLS_CMP_DATA_MSG_STATUS_OK \
+ (UINT32_C(0x0) << 10)
+ /* CFCK load error. */
+ #define CE_CMPLS_CMP_DATA_MSG_STATUS_CTX_LD_ERR \
+ (UINT32_C(0x1) << 10)
+ /* FID check error. */
+ #define CE_CMPLS_CMP_DATA_MSG_STATUS_FID_CHK_ERR \
+ (UINT32_C(0x2) << 10)
+ #define CE_CMPLS_CMP_DATA_MSG_STATUS_LAST \
+ CE_CMPLS_CMP_DATA_MSG_STATUS_FID_CHK_ERR
+ uint8_t unused0;
+ uint8_t mp_clients;
+ #define CE_CMPLS_CMP_DATA_MSG_UNUSED1_MASK UINT32_C(0xf)
+ #define CE_CMPLS_CMP_DATA_MSG_UNUSED1_SFT 0
+ /*
+ * This field represents the Mid-Path client that generated the
+ * completion.
+ */
+ #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_MASK UINT32_C(0xf0)
+ #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_SFT 4
+ /* TX crypto engine block. */
+ #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_TCE (UINT32_C(0x0) << 4)
+ /* RX crypto engine block. */
+ #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_RCE (UINT32_C(0x1) << 4)
+ #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_LAST \
+ CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_RCE
+ /*
+ * This is a copy of the opaque field from the mid path BD of this
+ * command.
+ */
+ uint32_t opaque;
+ /* */
+ uint32_t kid_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes will
+ * write 1. The odd passes will write 0.
+ */
+ #define CE_CMPLS_CMP_DATA_MSG_V UINT32_C(0x1)
+ /*
+ * This field is the Crypto Context ID. The KID is used to store
+ * information used by the associated kTLS offloaded connection.
+ */
+ #define CE_CMPLS_CMP_DATA_MSG_KID_MASK UINT32_C(0x1ffffe)
+ #define CE_CMPLS_CMP_DATA_MSG_KID_SFT 1
+ uint32_t unused2;
+} __rte_packed;
+
/* cmpl_base (size:128b/16B) */
struct cmpl_base {
uint16_t type;
* records. Odd values indicate 32B
* records.
*/
- #define RX_TPA_V2_END_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define RX_TPA_V2_END_CMPL_TYPE_SFT 0
+ #define RX_TPA_V2_END_CMPL_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define RX_TPA_V2_END_CMPL_TYPE_SFT 0
/*
* RX L2 TPA End Completion:
* Completion at the end of a TPA operation.
* Length = 32B
*/
- #define RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15)
+ #define RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END \
+ UINT32_C(0x15)
#define RX_TPA_V2_END_CMPL_TYPE_LAST \
RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END
- #define RX_TPA_V2_END_CMPL_FLAGS_MASK UINT32_C(0xffc0)
- #define RX_TPA_V2_END_CMPL_FLAGS_SFT 6
+ #define RX_TPA_V2_END_CMPL_FLAGS_MASK \
+ UINT32_C(0xffc0)
+ #define RX_TPA_V2_END_CMPL_FLAGS_SFT 6
/*
* When this bit is '1', it indicates a packet that has an
* error of some type. Type of error is indicated in
* error_flags.
*/
- #define RX_TPA_V2_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ #define RX_TPA_V2_END_CMPL_FLAGS_ERROR \
+ UINT32_C(0x40)
/* This field indicates how the packet was placed in the buffer. */
- #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
- #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_MASK \
+ UINT32_C(0x380)
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7
/*
* Jumbo:
* TPA Packet was placed using jumbo algorithm. This means
*/
#define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \
(UINT32_C(0x6) << 7)
+ /*
+ * IOC/Header-Data Separation:
+ * Packet will be placed using In-Order Completion/HDS where
+ * the header is in the first packet buffer. Payload of each
+ * packet will be placed such that each packet starts at the
+ * beginning of an aggregation buffer.
+ */
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_IOC_HDS \
+ (UINT32_C(0x7) << 7)
#define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_LAST \
- RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS
- /* unused is 2 b */
- #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00)
- #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_SFT 10
+ RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_IOC_HDS
+ /* unused is 1 b */
+ #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED \
+ UINT32_C(0x400)
+ /*
+ * This bit is '1' if metadata has been added to the end of the
+ * packet in host memory. Metadata starts at the first 32B boundary
+ * after the end of the packet for regular and jumbo placement.
+ * It starts at the first 32B boundary after the end of the header
+ * for HDS placement. The length of the metadata is indicated in the
+ * metadata itself.
+ */
+ #define RX_TPA_V2_END_CMPL_FLAGS_PKT_METADATA_PRESENT \
+ UINT32_C(0x800)
/*
* This value indicates what the inner packet determined for the
* packet was.
* field is valid and contains the TCP checksum.
* This also indicates that the payload_offset field is valid.
*/
- #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
- #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_SFT 12
+ #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_MASK \
+ UINT32_C(0xf000)
+ #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_SFT 12
/*
* This value is zero for TPA End completions.
* There is no data in the buffer that corresponds to the opaque
/* Master function selection event */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ERROR_RECOVERY \
UINT32_C(0x9)
+ /*
+ * An event signifying that a ring has been disabled by
+ * hw due to error.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_RING_MONITOR_MSG \
+ UINT32_C(0xa)
/* Function driver unloaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD \
UINT32_C(0x10)
*/
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PFC_WATCHDOG_CFG_CHANGE \
UINT32_C(0x41)
+ /*
+ * An echo request from the firmware. An echo response is expected by
+ * the firmware.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ECHO_REQUEST \
+ UINT32_C(0x42)
+ /*
+ * An event from firmware indicating who has been selected as the
+ * PHC Master or secondary. Also indicates the last time a failover
+ * happens.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PHC_MASTER \
+ UINT32_C(0x43)
+ /*
+ * An event from firmware showing the last PPS timestamp that has been
+ * latched.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PPS_TIMESTAMP \
+ UINT32_C(0x44)
+ /*
+ * An event from firmware indicating that an error has occurred.
+ * The driver should log the event so that an administrator can be
+ * aware that a problem has occurred that may need attention.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ERROR_REPORT \
+ UINT32_C(0x45)
+ /* Maximum Registrable event id. */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_MAX_RGTR_EVENT_ID \
+ UINT32_C(0x46)
/*
* A trace log message. This contains firmware trace logs string
* embedded in the asynchronous message. This is an experimental
/* APP configuration change */
#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_APP \
UINT32_C(0x4)
+ /* DSCP configuration change */
+ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_DSCP \
+ UINT32_C(0x8)
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
UINT32_C(0x8)
#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_LAST \
HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_RESET_NOTIFY
- /* Event specific data */
+ /* Event specific data. The data is for internal debug use only. */
uint32_t event_data2;
+ /*
+ * These bits indicate the status as being reported by the firmware.
+ * This value is exactly the same as status code in fw_status register.
+ * If the status code is equal to 0x8000, then the reset is initiated
+ * by the Host using the FW_RESET command when the FW is in a healthy
+ * state. If the status code is not equal to 0x8000, then the reset is
+ * initiated by the FW to recover from the error or FATAL state.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA2_FW_STATUS_CODE_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA2_FW_STATUS_CODE_SFT \
+ 0
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
/* A non-fatal firmware exception has occurred. */
#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_NON_FATAL \
(UINT32_C(0x3) << 8)
+ /* Fast reset */
+ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FAST_RESET \
+ (UINT32_C(0x4) << 8)
#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_LAST \
- HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FW_EXCEPTION_NON_FATAL
+ HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_REASON_CODE_FAST_RESET
/*
* Minimum time before driver should attempt access - units 100ms ticks.
* Range 0-65535
UINT32_C(0x2)
} __rte_packed;
+/* hwrm_async_event_cmpl_ring_monitor_msg (size:128b/16B) */
+struct hwrm_async_event_cmpl_ring_monitor_msg {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Ring Monitor Message. */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_ID_RING_MONITOR_MSG \
+ UINT32_C(0xa)
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_ID_RING_MONITOR_MSG
+ /* Event specific data */
+ uint32_t event_data2;
+ /* Type of Ring disabled. */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_SFT \
+ 0
+ /* tx ring disabled. */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_TX \
+ UINT32_C(0x0)
+ /* rx ring disabled. */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_RX \
+ UINT32_C(0x1)
+ /* cmpl ring disabled. */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_CMPL \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_CMPL
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /*
+ * Event specific data. If ring_type_disabled indicates a tx,rx or cmpl
+ * then this field will indicate the ring id.
+ */
+ uint32_t event_data1;
+} __rte_packed;
+
/* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */
struct hwrm_async_event_cmpl_func_drvr_unload {
uint16_t type;
HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE
/* Event specific data */
uint32_t event_data2;
+ /*
+ * This value indicates the VF ID of the VF whose configuration
+ * is changing if this async. event is sent to the parent PF.
+ * The firmware supports sending this to the parent PF if the
+ * `hwrm_func_qcaps.vf_cfg_async_for_pf_supported` value is 1.
+ * This value is undefined when the async. event is sent to the
+ * VF.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA2_VF_ID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA2_VF_ID_SFT 0
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
8
} __rte_packed;
+/* hwrm_async_event_cmpl_echo_request (size:128b/16B) */
+struct hwrm_async_event_cmpl_echo_request {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ECHO_REQUEST_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_ECHO_REQUEST_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_ECHO_REQUEST_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_ECHO_REQUEST_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ECHO_REQUEST_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * An echo request from the firmware. An echo response is expected by
+ * the firmware.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ECHO_REQUEST_EVENT_ID_ECHO_REQUEST \
+ UINT32_C(0x42)
+ #define HWRM_ASYNC_EVENT_CMPL_ECHO_REQUEST_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ECHO_REQUEST_EVENT_ID_ECHO_REQUEST
+ /* Event specific data that should be provided in the echo response */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ECHO_REQUEST_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_ECHO_REQUEST_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_ECHO_REQUEST_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data that should be provided in the echo response */
+ uint32_t event_data1;
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_phc_master (size:128b/16B) */
+struct hwrm_async_event_cmpl_phc_master {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async event is used to notify driver of changes
+ * in PHC master. Only one master function can configure
+ * PHC.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_ID_PHC_MASTER \
+ UINT32_C(0x43)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_ID_PHC_MASTER
+ /* Event specific data */
+ uint32_t event_data2;
+ /* This field provides the current master function. */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA2_PHC_MASTER_FID_MASK \
+ UINT32_C(0xffff)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA2_PHC_MASTER_FID_SFT \
+ 0
+ /* This field provides the current secondary function. */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA2_PHC_SEC_FID_MASK \
+ UINT32_C(0xffff0000)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA2_PHC_SEC_FID_SFT \
+ 16
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates to the driver the type of PHC event. */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_MASK \
+ UINT32_C(0xf)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_SFT \
+ 0
+ /*
+ * Indicates PHC Master selection event. The master fid is
+ * specified in event_data2.phc_master_fid.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_PHC_MASTER \
+ UINT32_C(0x1)
+ /*
+ * Indicates PHC Secondary selection event. The secondary fid is
+ * specified in event_data2.phc_sec_fid.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_PHC_SECONDARY \
+ UINT32_C(0x2)
+ /*
+ * Indicates PHC failover event. Failover happens from
+ * event_data2.phc_master_fid to event_data2.phc_sec_fid.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_PHC_FAILOVER \
+ UINT32_C(0x3)
+ #define HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PHC_MASTER_EVENT_DATA1_FLAGS_PHC_FAILOVER
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_pps_timestamp (size:128b/16B) */
+struct hwrm_async_event_cmpl_pps_timestamp {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async notification message can be used to inform
+ * driver of the latest PPS timestamp that has been latched.
+ * When driver enables PPS event, Firmware will generate
+ * PPS timestamps every second, Firmware informs driver
+ * of this timestamp through the async event.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_ID_PPS_TIMESTAMP \
+ UINT32_C(0x44)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_ID_PPS_TIMESTAMP
+ /* Event specific data */
+ uint32_t event_data2;
+ /* Indicates the PPS event type */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE \
+ UINT32_C(0x1)
+ /* This is an internal event. */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE_INTERNAL \
+ UINT32_C(0x0)
+ /* This is an external event. */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE_EXTERNAL \
+ UINT32_C(0x1)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_EVENT_TYPE_EXTERNAL
+ /*
+ * Indicates the pin number on which the event is
+ * received.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_PIN_NUMBER_MASK \
+ UINT32_C(0xe)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_PIN_NUMBER_SFT \
+ 1
+ /*
+ * Contains bits[47:32] of the upper PPS timestamp.
+ * Lower 32 bits are in event_data1. Together they
+ * provide the 48 bit PPS timestamp.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_PPS_TIMESTAMP_UPPER_MASK \
+ UINT32_C(0xffff0)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA2_PPS_TIMESTAMP_UPPER_SFT \
+ 4
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Contains the lower 32 bits of the PPS timestamp. */
+ uint32_t event_data1;
+ /* Contains the lower 32 bit PPS timestamp */
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA1_PPS_TIMESTAMP_LOWER_MASK \
+ UINT32_C(0xffffffff)
+ #define HWRM_ASYNC_EVENT_CMPL_PPS_TIMESTAMP_EVENT_DATA1_PPS_TIMESTAMP_LOWER_SFT \
+ 0
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_error_report (size:128b/16B) */
+struct hwrm_async_event_cmpl_error_report {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async notification message is used to inform
+ * the driver that an error has occurred which may need
+ * the attention of the administrator.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_ID_ERROR_REPORT \
+ UINT32_C(0x45)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_ID_ERROR_REPORT
+ /* Event specific data. */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /*
+ * Indicates the type of error being reported. See section on Error
+ * Report event error_types for details on each error.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_DATA1_ERROR_TYPE_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_EVENT_DATA1_ERROR_TYPE_SFT 0
+} __rte_packed;
+
/* hwrm_async_event_cmpl_fw_trace_msg (size:128b/16B) */
struct hwrm_async_event_cmpl_fw_trace_msg {
uint16_t type;
UINT32_C(0x1)
} __rte_packed;
+/* hwrm_async_event_cmpl_error_report_base (size:128b/16B) */
+struct hwrm_async_event_cmpl_error_report_base {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async notification message is used to inform
+ * the driver that an error has occurred which may need
+ * the attention of the administrator.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_ID_ERROR_REPORT \
+ UINT32_C(0x45)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_ID_ERROR_REPORT
+ /* Event specific data. */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates the type of error being reported. */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_SFT \
+ 0
+ /* Reserved */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_RESERVED \
+ UINT32_C(0x0)
+ /*
+ * The NIC was subjected to an extended pause storm which caused it
+ * to disable flow control in order to avoid stalling the Tx path.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_PAUSE_STORM \
+ UINT32_C(0x1)
+ /*
+ * The NIC received an interrupt storm on a TSIO pin being used as
+ * PPS_IN which caused it to disable the interrupt. The signal
+ * should be fixed to be a proper 1 PPS signal before re-enabling
+ * it. The pin number on which this signal was received is stored
+ * in event_data2 as pin_id.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_INVALID_SIGNAL \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_BASE_EVENT_DATA1_ERROR_TYPE_INVALID_SIGNAL
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_error_report_pause_storm (size:128b/16B) */
+struct hwrm_async_event_cmpl_error_report_pause_storm {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async notification message is used to inform
+ * the driver that an error has occurred which may need
+ * the attention of the administrator.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_ID_ERROR_REPORT \
+ UINT32_C(0x45)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_ID_ERROR_REPORT
+ /* Event specific data. */
+ uint32_t event_data2;
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates the type of error being reported. */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_SFT \
+ 0
+ /*
+ * The NIC was subjected to an extended pause storm which caused it
+ * to disable flow control in order to avoid stalling the Tx path.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_PAUSE_STORM \
+ UINT32_C(0x1)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_PAUSE_STORM_EVENT_DATA1_ERROR_TYPE_PAUSE_STORM
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_error_report_invalid_signal (size:128b/16B) */
+struct hwrm_async_event_cmpl_error_report_invalid_signal {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_SFT \
+ 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /*
+ * This async notification message is used to inform
+ * the driver that an error has occurred which may need
+ * the attention of the administrator.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_ID_ERROR_REPORT \
+ UINT32_C(0x45)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_ID_ERROR_REPORT
+ /* Event specific data. */
+ uint32_t event_data2;
+ /* Indicates the TSIO pin on which invalid signal is detected. */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA2_PIN_ID_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA2_PIN_ID_SFT \
+ 0
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_V \
+ UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_OPAQUE_SFT 1
+ /* 8-lsb timestamp (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Indicates the type of error being reported. */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_SFT \
+ 0
+ /*
+ * The NIC received an interrupt storm on a TSIO pin being used as
+ * PPS_IN which caused it to disable the interrupt. The signal
+ * should be fixed to be a proper 1 PPS signal before re-enabling
+ * it. The pin number on which this signal was received is stored
+ * in event_data2 as pin_id.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_INVALID_SIGNAL \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_ERROR_REPORT_INVALID_SIGNAL_EVENT_DATA1_ERROR_TYPE_INVALID_SIGNAL
+} __rte_packed;
+
+/* metadata_base_msg (size:64b/8B) */
+struct metadata_base_msg {
+ uint16_t md_type_link;
+ /* This field classifies the data present in the meta-data. */
+ #define METADATA_BASE_MSG_MD_TYPE_MASK UINT32_C(0x1f)
+ #define METADATA_BASE_MSG_MD_TYPE_SFT 0
+ /* Meta data fields are not valid */
+ #define METADATA_BASE_MSG_MD_TYPE_NONE UINT32_C(0x0)
+ /*
+ * This setting is used when packets are coming in-order. Depending on
+ * the state of the receive context, the meta-data will carry different
+ * information.
+ */
+ #define METADATA_BASE_MSG_MD_TYPE_TLS_INSYNC UINT32_C(0x1)
+ /*
+ * With this setting HW passes the TCP sequence number of the TLS
+ * record that it is requesting a resync on in the meta data.
+ */
+ #define METADATA_BASE_MSG_MD_TYPE_TLS_RESYNC UINT32_C(0x2)
+ #define METADATA_BASE_MSG_MD_TYPE_LAST \
+ METADATA_BASE_MSG_MD_TYPE_TLS_RESYNC
+ /*
+ * This field indicates where the next metadata block starts. It is
+ * counted in 16B units. A value of zero indicates that there is no
+ * metadata.
+ */
+ #define METADATA_BASE_MSG_LINK_MASK UINT32_C(0x1e0)
+ #define METADATA_BASE_MSG_LINK_SFT 5
+ uint16_t unused0;
+ uint32_t unused1;
+} __rte_packed;
+
+/* tls_metadata_base_msg (size:64b/8B) */
+struct tls_metadata_base_msg {
+ uint32_t md_type_link_flags_kid_lo;
+ /* This field classifies the data present in the meta-data. */
+ #define TLS_METADATA_BASE_MSG_MD_TYPE_MASK \
+ UINT32_C(0x1f)
+ #define TLS_METADATA_BASE_MSG_MD_TYPE_SFT 0
+ /*
+ * This setting is used when packets are coming in-order. Depending on
+ * the state of the receive context, the meta-data will carry different
+ * information.
+ */
+ #define TLS_METADATA_BASE_MSG_MD_TYPE_TLS_INSYNC \
+ UINT32_C(0x1)
+ /*
+ * With this setting HW passes the TCP sequence number of the TLS
+ * record that it is requesting a resync on in the meta data.
+ */
+ #define TLS_METADATA_BASE_MSG_MD_TYPE_TLS_RESYNC \
+ UINT32_C(0x2)
+ #define TLS_METADATA_BASE_MSG_MD_TYPE_LAST \
+ TLS_METADATA_BASE_MSG_MD_TYPE_TLS_RESYNC
+ /*
+ * This field indicates where the next metadata block starts. It is
+ * counted in 16B units. A value of zero indicates that there is no
+ * metadata.
+ */
+ #define TLS_METADATA_BASE_MSG_LINK_MASK \
+ UINT32_C(0x1e0)
+ #define TLS_METADATA_BASE_MSG_LINK_SFT 5
+ /* These are flags present in the metadata. */
+ #define TLS_METADATA_BASE_MSG_FLAGS_MASK \
+ UINT32_C(0x1fffe00)
+ #define TLS_METADATA_BASE_MSG_FLAGS_SFT 9
+ /*
+ * A value of 1 implies that the packet was decrypted by HW. Otherwise
+ * the packet is passed on as it came in on the wire.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_DECRYPTED \
+ UINT32_C(0x200)
+ /*
+ * This field indicates the state of the ghash field passed in the
+ * meta-data.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_MASK \
+ UINT32_C(0xc00)
+ #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_SFT 10
+ /*
+ * This enumeration states that the ghash is not valid in the
+ * meta-data.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_NOT_VALID \
+ (UINT32_C(0x0) << 10)
+ /*
+ * This enumeration indicates that this pkt contains the record's
+ * tag and this pkt was received ooo, the partial_ghash field
+ * contains the ghash.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_CUR_REC \
+ (UINT32_C(0x1) << 10)
+ /*
+ * This enumeration indicates that the current record's tag wasn't
+ * seen and the chip is moving on to the next record, the
+ * partial_ghash field contains the ghash.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_PRIOR_REC \
+ (UINT32_C(0x2) << 10)
+ #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_LAST \
+ TLS_METADATA_BASE_MSG_FLAGS_GHASH_PRIOR_REC
+ /* This field indicates the status of tag authentication. */
+ #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_MASK \
+ UINT32_C(0x3000)
+ #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_SFT 12
+ /*
+ * This enumeration is set when there is no tags present in the
+ * packet.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_NONE \
+ (UINT32_C(0x0) << 12)
+ /*
+ * This enumeration states that there is at least one tag in the
+ * packet and every tag is valid.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_SUCCESS \
+ (UINT32_C(0x1) << 12)
+ /*
+ * This enumeration states that there is at least one tag in the
+ * packet and at least one of the tag is invalid. The entire packet
+ * is sent decrypted to the host.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_FAILURE \
+ (UINT32_C(0x2) << 12)
+ #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_LAST \
+ TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_FAILURE
+ /*
+ * A value of 1 indicates that this packet contains a record that
+ * starts in the packet and extends beyond the packet.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_HEADER_FLDS_VALID \
+ UINT32_C(0x4000)
+ /*
+ * This value indicates the lower 7-bit of the Crypto Key ID
+ * associated with this operation.
+ */
+ #define TLS_METADATA_BASE_MSG_KID_LO_MASK \
+ UINT32_C(0xfe000000)
+ #define TLS_METADATA_BASE_MSG_KID_LO_SFT 25
+ uint16_t kid_hi;
+ /*
+ * This value indicates the upper 13-bit of the Crypto Key ID
+ * associated with this operation.
+ */
+ #define TLS_METADATA_BASE_MSG_KID_HI_MASK UINT32_C(0x1fff)
+ #define TLS_METADATA_BASE_MSG_KID_HI_SFT 0
+ uint16_t unused0;
+} __rte_packed;
+
+/* tls_metadata_insync_msg (size:192b/24B) */
+struct tls_metadata_insync_msg {
+ uint32_t md_type_link_flags_kid_lo;
+ /* This field classifies the data present in the meta-data. */
+ #define TLS_METADATA_INSYNC_MSG_MD_TYPE_MASK \
+ UINT32_C(0x1f)
+ #define TLS_METADATA_INSYNC_MSG_MD_TYPE_SFT 0
+ /*
+ * This setting is used when packets are coming in-order. Depending on
+ * the state of the receive context, the meta-data will carry different
+ * information.
+ */
+ #define TLS_METADATA_INSYNC_MSG_MD_TYPE_TLS_INSYNC \
+ UINT32_C(0x1)
+ #define TLS_METADATA_INSYNC_MSG_MD_TYPE_LAST \
+ TLS_METADATA_INSYNC_MSG_MD_TYPE_TLS_INSYNC
+ /*
+ * This field indicates where the next metadata block starts. It is
+ * counted in 16B units. A value of zero indicates that there is no
+ * metadata.
+ */
+ #define TLS_METADATA_INSYNC_MSG_LINK_MASK \
+ UINT32_C(0x1e0)
+ #define TLS_METADATA_INSYNC_MSG_LINK_SFT 5
+ /* These are flags present in the metadata. */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_MASK \
+ UINT32_C(0x1fffe00)
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_SFT 9
+ /*
+ * A value of 1 implies that the packet was decrypted by HW. Otherwise
+ * the packet is passed on as it came in on the wire.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_DECRYPTED \
+ UINT32_C(0x200)
+ /*
+ * This field indicates the state of the ghash field passed in the
+ * meta-data.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_MASK \
+ UINT32_C(0xc00)
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_SFT 10
+ /*
+ * This enumeration states that the ghash is not valid in the
+ * meta-data.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_NOT_VALID \
+ (UINT32_C(0x0) << 10)
+ /*
+ * This enumeration indicates that this pkt contains the record's
+ * tag and this pkt was received ooo, the partial_ghash field
+ * contains the ghash.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_CUR_REC \
+ (UINT32_C(0x1) << 10)
+ /*
+ * This enumeration indicates that the current record's tag wasn't
+ * seen and the chip is moving on to the next record, the
+ * partial_ghash field contains the ghash.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_PRIOR_REC \
+ (UINT32_C(0x2) << 10)
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_LAST \
+ TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_PRIOR_REC
+ /* This field indicates the status of tag authentication. */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_MASK \
+ UINT32_C(0x3000)
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_SFT 12
+ /*
+ * This enumeration is set when there is no tags present in the
+ * packet.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_NONE \
+ (UINT32_C(0x0) << 12)
+ /*
+ * This enumeration states that there is at least one tag in the
+ * packet and every tag is valid.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_SUCCESS \
+ (UINT32_C(0x1) << 12)
+ /*
+ * This enumeration states that there is at least one tag in the
+ * packet and at least one of the tag is invalid. The entire packet
+ * is sent decrypted to the host.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_FAILURE \
+ (UINT32_C(0x2) << 12)
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_LAST \
+ TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_FAILURE
+ /*
+ * A value of 1 indicates that this packet contains a record that
+ * starts in the packet and extends beyond the packet.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_HEADER_FLDS_VALID \
+ UINT32_C(0x4000)
+ /*
+ * This value indicates the lower 7-bit of the Crypto Key ID
+ * associated with this operation.
+ */
+ #define TLS_METADATA_INSYNC_MSG_KID_LO_MASK \
+ UINT32_C(0xfe000000)
+ #define TLS_METADATA_INSYNC_MSG_KID_LO_SFT 25
+ uint16_t kid_hi;
+ /*
+ * This value indicates the upper 13-bit of the Crypto Key ID
+ * associated with this operation.
+ */
+ #define TLS_METADATA_INSYNC_MSG_KID_HI_MASK UINT32_C(0x1fff)
+ #define TLS_METADATA_INSYNC_MSG_KID_HI_SFT 0
+ /*
+ * This field is only valid when md_type is set to tls_insync. This field
+ * indicates the offset within the current TCP packet where the TLS header
+ * starts. If there are multiple TLS headers in the packet, this provides
+ * the offset of the last TLS header.
+ *
+ * The field is calculated by subtracting TCP sequence number of the first
+ * byte of the TCP payload of the packet from the TCP sequence number of
+ * the last TLS header in the packet.
+ */
+ uint16_t tls_header_offset;
+ /*
+ * This is the sequence Number of the record that was processed by the HW.
+ * If there are multiple records in a packet, this would be the sequence
+ * number of the last record.
+ */
+ uint64_t record_seq_num;
+ /*
+ * This field contains cumulative partial GHASH value of all the packets
+ * decrypted by the HW associated with a TLS record. This field is valid
+ * on when packets belonging to have arrived out-of-order and HW could
+ * not decrypt every packet and authenticate the record. Partial GHASH is
+ * only sent out with packet having the TAG field.
+ */
+ uint64_t partial_ghash;
+} __rte_packed;
+
+/* tls_metadata_resync_msg (size:256b/32B) */
+struct tls_metadata_resync_msg {
+ uint32_t md_type_link_flags_kid_lo;
+ /* This field classifies the data present in the meta-data. */
+ #define TLS_METADATA_RESYNC_MSG_MD_TYPE_MASK \
+ UINT32_C(0x1f)
+ #define TLS_METADATA_RESYNC_MSG_MD_TYPE_SFT 0
+ /*
+ * With this setting HW passes the TCP sequence number of the TLS
+ * record that it is requesting a resync on in the meta data.
+ */
+ #define TLS_METADATA_RESYNC_MSG_MD_TYPE_TLS_RESYNC \
+ UINT32_C(0x2)
+ #define TLS_METADATA_RESYNC_MSG_MD_TYPE_LAST \
+ TLS_METADATA_RESYNC_MSG_MD_TYPE_TLS_RESYNC
+ /*
+ * This field indicates where the next metadata block starts. It is
+ * counted in 16B units. A value of zero indicates that there is no
+ * metadata.
+ */
+ #define TLS_METADATA_RESYNC_MSG_LINK_MASK \
+ UINT32_C(0x1e0)
+ #define TLS_METADATA_RESYNC_MSG_LINK_SFT 5
+ /* These are flags present in the metadata. */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_MASK \
+ UINT32_C(0x1fffe00)
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_SFT 9
+ /*
+ * A value of 1 implies that the packet was decrypted by HW. Otherwise
+ * the packet is passed on as it came in on the wire.
+ */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_DECRYPTED \
+ UINT32_C(0x200)
+ /*
+ * This field indicates the state of the ghash field passed in the
+ * meta-data.
+ */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_MASK \
+ UINT32_C(0xc00)
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_SFT 10
+ /*
+ * This enumeration states that the ghash is not valid in the
+ * meta-data.
+ */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_NOT_VALID \
+ (UINT32_C(0x0) << 10)
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_LAST \
+ TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_NOT_VALID
+ /* This field indicates the status of tag authentication. */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_MASK \
+ UINT32_C(0x3000)
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_SFT 12
+ /*
+ * This enumeration is set when there is no tags present in the
+ * packet.
+ */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_NONE \
+ (UINT32_C(0x0) << 12)
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_LAST \
+ TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_NONE
+ /*
+ * A value of 1 indicates that this packet contains a record that
+ * starts in the packet and extends beyond the packet.
+ */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_HEADER_FLDS_VALID \
+ UINT32_C(0x4000)
+ /*
+ * This value indicates the lower 7-bit of the Crypto Key ID
+ * associated with this operation.
+ */
+ #define TLS_METADATA_RESYNC_MSG_KID_LO_MASK \
+ UINT32_C(0xfe000000)
+ #define TLS_METADATA_RESYNC_MSG_KID_LO_SFT 25
+ uint16_t kid_hi;
+ /*
+ * This value indicates the upper 13-bit of the Crypto Key ID
+ * associated with this operation.
+ */
+ #define TLS_METADATA_RESYNC_MSG_KID_HI_MASK UINT32_C(0x1fff)
+ #define TLS_METADATA_RESYNC_MSG_KID_HI_SFT 0
+ /* This field is unused in this context. */
+ uint16_t metadata_0;
+ /*
+ * This field indicates the TCP sequence number of the TLS record that HW
+ * is requesting a resync on from the Driver. HW will keep a count of the
+ * TLS records it found after this record (delta_records). Driver will
+ * provide the TLS Record Sequence Number associated with the record. HW
+ * will add the delta_records to the Record Sequence Number provided by
+ * the driver and get back on sync.
+ */
+ uint32_t resync_record_tcp_seq_num;
+ uint32_t unused0;
+ /* This field is unused in this context. */
+ uint64_t metadata_2;
+ /* This field is unused in this context. */
+ uint64_t metadata_3;
+} __rte_packed;
+
/*******************
* hwrm_func_reset *
*******************/
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PPP_PUSH_MODE_SUPPORTED \
UINT32_C(0x80)
+ /*
+ * If set to 1, then this function doesn't have the privilege to
+ * configure the EVB mode of the port it uses.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_EVB_MODE_CFG_NOT_SUPPORTED \
+ UINT32_C(0x100)
+ /*
+ * If set to 1, then the HW and FW support the SoC packet DMA
+ * datapath between SoC and NIC. This function can act as the
+ * HWRM communication transport agent on behalf of the SoC SPD
+ * software module. This capability is only advertised to the
+ * SoC PFs.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_SOC_SPD_SUPPORTED \
+ UINT32_C(0x200)
+ /*
+ * If set to 1, then this function supports FW_LIVEPATCH for
+ * firmware livepatch commands.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_FW_LIVEPATCH_SUPPORTED \
+ UINT32_C(0x400)
+ /*
+ * When this bit is '1', it indicates that core firmware is
+ * capable of fast Reset.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_FAST_RESET_CAPABLE \
+ UINT32_C(0x800)
+ /*
+ * When this bit is '1', it indicates that firmware and hardware
+ * are capable of updating tx_metadata via hwrm_ring_cfg command.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_TX_METADATA_CFG_CAPABLE \
+ UINT32_C(0x1000)
+ /*
+ * If set to 1, then the device can report the action
+ * needed to activate set nvm options.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_NVM_OPTION_ACTION_SUPPORTED \
+ UINT32_C(0x2000)
+ /*
+ * When this bit is '1', it indicates that the BD metadata feature
+ * is supported for this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_BD_METADATA_SUPPORTED \
+ UINT32_C(0x4000)
+ /*
+ * When this bit is '1', it indicates that the echo request feature
+ * is supported for this function. If the driver registers for the
+ * echo request asynchronous event, then the firmware can send an
+ * unsolicited echo request to the driver and expect an echo
+ * response.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_ECHO_REQUEST_SUPPORTED \
+ UINT32_C(0x8000)
+ /*
+ * When this bit is '1', it indicates that core firmware supports
+ * NPAR 1.2 on this function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_NPAR_1_2_SUPPORTED \
+ UINT32_C(0x10000)
+ /* When this bit is '1', it indicates that PTM feature is supported. */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PTP_PTM_SUPPORTED \
+ UINT32_C(0x20000)
+ /* When this bit is '1', it indicates that PPS feature is supported. */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PTP_PPS_SUPPORTED \
+ UINT32_C(0x40000)
+ /*
+ * When this bit is '1', it indicates that VF config. change
+ * async event is supported on the parent PF if the async.
+ * event is registered by the PF.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_VF_CFG_ASYNC_FOR_PF_SUPPORTED \
+ UINT32_C(0x80000)
+ /*
+ * When this bit is '1', the NIC supports configuration of
+ * partition_min_bw and partition_max_bw.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_PARTITION_BW_SUPPORTED \
+ UINT32_C(0x100000)
+ /*
+ * When this bit is '1', the FW supports configuration of
+ * PCP and TPID values of the default VLAN.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_DFLT_VLAN_TPID_PCP_SUPPORTED \
+ UINT32_C(0x200000)
+ /* When this bit is '1', it indicates that HW and FW support KTLS. */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_KTLS_SUPPORTED \
+ UINT32_C(0x400000)
+ /*
+ * When this bit is '1', the firmware supports HWRM_PORT_EP_TX_CFG
+ * and HWRM_PORT_EP_TX_QCFG for endpoint rate control, and additions
+ * to HWRM_QUEUE_GLOBAL_CFG and HWRM_QUEUE_GLOBAL_QCFG for receive
+ * rate control.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_EXT_EP_RATE_CONTROL \
+ UINT32_C(0x800000)
/* The maximum number of SCHQs supported by this device. */
uint8_t max_schqs;
- uint8_t unused_1[2];
+ uint8_t mpc_chnls_cap;
+ /*
+ * When this bit is '1', it indicates that HW and firmware
+ * supports the use of a MPC channel with destination set
+ * to the TX crypto engine block.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_TCE UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates that HW and firmware
+ * supports the use of a MPC channel with destination set
+ * to the RX crypto engine block.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_RCE UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates that HW and firmware
+ * supports the use of a MPC channel with destination set
+ * to the TX configurable flow processing block.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_TE_CFA UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates that HW and firmware
+ * supports the use of a MPC channel with destination set
+ * to the RX configurable flow processing block.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_RE_CFA UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates that HW and firmware
+ * supports the use of a MPC channel with destination set
+ * to the primate processor block.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_PRIMATE UINT32_C(0x10)
+ uint8_t unused_1;
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
uint8_t unused_0[6];
} __rte_packed;
-/* hwrm_func_qcfg_output (size:768b/96B) */
+/* hwrm_func_qcfg_output (size:832b/104B) */
struct hwrm_func_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
UINT32_C(0x10)
/*
* If set to 1, then multi-host mode is active for this function.
+ * The NIC is attached to two or more independent host systems
+ * through two or more PCIe endpoints.
* If set to 0, then multi-host mode is inactive for this function
* or not applicable for this device.
*/
*/
#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_PPP_PUSH_MODE_ENABLED \
UINT32_C(0x400)
+ /*
+ * If set to 1, then the firmware will notify driver using async
+ * event when a ring is disabled due to a Hardware error.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_RING_MONITOR_ENABLED \
+ UINT32_C(0x800)
+ /*
+ * If set to 1, then the firmware and all currently registered driver
+ * instances support fast reset. The fast reset support will be
+ * updated dynamically based on the driver interface advertisement.
+ * If set to 0, then the adapter is not currently able to initiate
+ * fast reset.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FAST_RESET_ALLOWED \
+ UINT32_C(0x1000)
+ /*
+ * If set to 1, then multi-root mode is active for this function.
+ * The NIC is attached to a single host with a single operating
+ * system, but through two or more PCIe endpoints.
+ * If set to 0, then multi-root mode is inactive for this function
+ * or not applicable for this device.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_ROOT \
+ UINT32_C(0x2000)
+ /*
+ * This flag indicates RDMA support for child VFS of
+ * a physical function.
+ * If set to 1, RoCE is supported on all child VFs.
+ * If set to 0, RoCE is disabled on all child VFs.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_ENABLE_RDMA_SRIOV \
+ UINT32_C(0x4000)
/*
* This value is current MAC address configured for this
* function. A value of 00-00-00-00-00-00 indicates no
/* The allocated number of vnics to the function. */
uint16_t alloc_vnics;
/*
- * The maximum transmission unit of the function.
- * If the reported mtu value is non-zero then it will used for the
- * rings allocated on this function. otherwise the default
+ * The maximum transmission unit of the function
+ * configured by the admin pf.
+ * If the reported mtu value is non-zero then it will be used for the
+ * rings allocated on this function, otherwise the default
* value is used if ring MTU is not specified.
+ * The driver cannot use any MTU bigger than this value
+ * if it is non-zero.
*/
- uint16_t mtu;
+ uint16_t admin_mtu;
/*
* The maximum receive unit of the function.
* For vnics allocated on this function, this default
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3)
/* Network Partitioning 2.0 */
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4)
+ /* Network Partitioning 1.2 */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_2 UINT32_C(0x5)
/* Unknown */
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN \
UINT32_C(0xff)
uint16_t dflt_vnic_id;
uint16_t max_mtu_configured;
/*
- * Minimum BW allocated for this function.
- * The HWRM will translate this value into byte counter and
- * time interval used for the scheduler inside the device.
- * A value of 0 indicates the minimum bandwidth is not
- * configured.
+ * Minimum guaranteed transmit bandwidth for this function. When
+ * specified for a PF, does not affect traffic from the PF's child VFs.
+ * A value of 0 indicates the minimum bandwidth is not configured.
*/
uint32_t min_bw;
/* The bandwidth value. */
/* Value is in Gb or GB (base 10). */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_GIGA \
(UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
+ /* Value is in 1/100th of a percentage of link bandwidth. */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \
HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID
/*
- * Maximum BW allocated for this function.
- * The HWRM will translate this value into byte counter and
- * time interval used for the scheduler inside the device.
- * A value of 0 indicates that the maximum bandwidth is not
- * configured.
+ * Maximum transmit rate for this function. When specified for a PF,
+ * does not affect traffic from the PF's child VFs.
+ * A value of 0 indicates that the maximum bandwidth is not configured.
*/
uint32_t max_bw;
/* The bandwidth value. */
/* Value is in Gb or GB (base 10). */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
(UINT32_C(0x6) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
+ /* Value is in 1/100th of a percentage of link bandwidth. */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
#define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_SFT 0
/* This field specifies whether svif is valid or not */
#define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_VALID UINT32_C(0x8000)
- uint8_t unused_2[7];
+ uint8_t mpc_chnls;
+ /*
+ * When this bit is '1', it indicates that a MPC channel with
+ * destination set to the TX crypto engine block is enabled.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_TCE_ENABLED \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates that a MPC channel with
+ * destination set to the RX crypto engine block is enabled.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_RCE_ENABLED \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates that a MPC channel with
+ * destination set to the TX configurable flow processing block is
+ * enabled.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_TE_CFA_ENABLED \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates that a MPC channel with
+ * destination set to the RX configurable flow processing block is
+ * enabled.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_RE_CFA_ENABLED \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates that a MPC channel with
+ * destination set to the primate processor block is enabled.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_PRIMATE_ENABLED \
+ UINT32_C(0x10)
+ uint8_t unused_2[3];
+ /*
+ * Minimum guaranteed bandwidth for the network partition made up
+ * of the caller physical function and all its child virtual
+ * functions. The rate is specified as a percentage of the bandwidth
+ * of the link the partition is associated with. A value of 0
+ * indicates that no minimum bandwidth is configured.
+ * The format of this field is defined to match min_bw, even though
+ * the partition minimum rate is always specified as a percentage.
+ */
+ uint32_t partition_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_SFT \
+ 0
+ /*
+ * The granularity of the value (bits or bytes). Firmware never sets
+ * this field.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_SCALE_BYTES
+ /* Always percentage of link bandwidth. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Bandwidth value is in hundredths of a percent of link bandwidth. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_PERCENT1_100
+ /*
+ * The maximum bandwidth that may be used by the network partition
+ * made up of the caller physical function and all its child virtual
+ * functions. The rate is specified as a percentage of the bandwidth
+ * of the link the partition is associated with. A value of 0
+ * indicates that no maximum bandwidth is configured.
+ * The format of this field is defined to match max_bw, even though
+ * the partition bandwidth must be specified as a percentage.
+ */
+ uint32_t partition_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_SFT \
+ 0
+ /*
+ * The granularity of the value (bits or bytes). Firmware never sets
+ * this field.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_SCALE_BYTES
+ /* Always a percentage of link bandwidth. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in hundredths of a percent of link bandwidth. */
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ #define HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_FUNC_QCFG_OUTPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_PERCENT1_100
+ /*
+ * The maximum transmission unit of the function
+ * configured by the host pf/vf.
+ * If the reported mtu value is non-zero then it will be used for the
+ * rings allocated on this function, otherwise the default
+ * value is used if ring MTU is not specified.
+ */
+ uint16_t host_mtu;
+ uint8_t unused_3;
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
*****************/
-/* hwrm_func_cfg_input (size:768b/96B) */
+/* hwrm_func_cfg_input (size:832b/104B) */
struct hwrm_func_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* Function ID of the function that is being
* configured.
- * If set to 0xFF... (All Fs), then the the configuration is
+ * If set to 0xFF... (All Fs), then the configuration is
* for the requesting function.
*/
uint16_t fid;
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_PPP_PUSH_MODE_DISABLE \
UINT32_C(0x10000000)
+ /*
+ * If this bit is set to 1, the driver is requesting FW to enable
+ * the BD_METADATA feature for this function. The FW returns error
+ * on this request if the TX_METADATA is enabled for this function.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_BD_METADATA_ENABLE \
+ UINT32_C(0x20000000)
+ /*
+ * If this bit is set to 1, the driver is requesting FW to disable
+ * the BD_METADATA feature for this function. The FW returns error
+ * on this request if the TX_METADATA is enabled for this function.
+ */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_BD_METADATA_DISABLE \
+ UINT32_C(0x40000000)
uint32_t enables;
/*
- * This bit must be '1' for the mtu field to be
+ * This bit must be '1' for the admin_mtu field to be
* configured.
*/
- #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU \
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ADMIN_MTU \
UINT32_C(0x1)
/*
* This bit must be '1' for the mru field to be
#define HWRM_FUNC_CFG_INPUT_ENABLES_SCHQ_ID \
UINT32_C(0x1000000)
/*
+ * This bit must be '1' for the mpc_chnls field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MPC_CHNLS \
+ UINT32_C(0x2000000)
+ /*
+ * This bit must be '1' for the partition_min_bw field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_PARTITION_MIN_BW \
+ UINT32_C(0x4000000)
+ /*
+ * This bit must be '1' for the partition_max_bw field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_PARTITION_MAX_BW \
+ UINT32_C(0x8000000)
+ /*
+ * This bit must be '1' for the tpid field to be
+ * configured. This bit is only valid when dflt_vlan enable
+ * bit is set.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_TPID \
+ UINT32_C(0x10000000)
+ /*
+ * This bit must be '1' for the host_mtu field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_HOST_MTU \
+ UINT32_C(0x20000000)
+ /*
+ * This field can be used by the admin PF to configure
+ * mtu of foster PFs.
* The maximum transmission unit of the function.
* The HWRM should make sure that the mtu of
* the function does not exceed the mtu of the physical
* The HWRM should make sure that the mtu of each transmit
* ring that is assigned to a function has a valid mtu.
*/
- uint16_t mtu;
+ uint16_t admin_mtu;
/*
* The maximum receive unit of the function.
* The HWRM should make sure that the mru of
*/
uint32_t dflt_ip_addr[4];
/*
- * Minimum BW allocated for this function.
- * The HWRM will translate this value into byte counter and
- * time interval used for the scheduler inside the device.
+ * Minimum guaranteed transmit bandwidth for this function. When
+ * specified for a PF, does not affect traffic from the PF's child VFs.
+ * A value of 0 indicates the minimum bandwidth is not configured.
*/
uint32_t min_bw;
/* The bandwidth value. */
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \
HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID
/*
- * Maximum BW allocated for this function.
- * The HWRM will translate this value into byte counter and
- * time interval used for the scheduler inside the device.
+ * Maximum transmit rate for this function. When specified for a PF,
+ * does not affect traffic from the PF's child VFs.
+ * A value of 0 indicates that the maximum bandwidth is not configured.
*/
uint32_t max_bw;
/* The bandwidth value. */
*/
uint8_t allowed_vlan_pris;
/*
- * The HWRM shall allow a PF driver to change EVB mode for the
- * partition it belongs to.
- * The HWRM shall not allow a VF driver to change the EVB mode.
- * The HWRM shall take into account the switching of EVB mode
- * from one to another and reconfigure hardware resources as
- * appropriately.
- * The switching from VEB to VEPA mode requires
- * the disabling of the loopback traffic. Additionally,
- * source knock outs are handled differently in VEB and VEPA
- * modes.
+ * The evb_mode is configured on a per port basis. The default evb_mode
+ * is configured based on the NVM EVB mode setting upon firmware
+ * initialization. The HWRM allows a PF driver to change EVB mode for a
+ * port used by the PF only when one of the following conditions is
+ * satisfied.
+ * 1. The current operating mode is single function mode.
+ * (ie. one PF per port)
+ * 2. For SmartNIC, any one of the PAXC PFs is permitted to change the
+ * EVB mode of the port used by the PAXC PF. None of the X86 PFs
+ * should have privileges.
+ * The HWRM doesn't permit any PFs to change the underlying EVB mode
+ * when running as MHB or NPAR mode in performance NIC configuration.
+ * The HWRM doesn't permit a VF driver to change the EVB mode.
+ * Once the HWRM determines a function doesn't meet the conditions
+ * to configure the EVB mode, it sets the evb_mode_cfg_not_supported
+ * flag in HWRM_FUNC_QCAPS command response for the function.
+ * The HWRM takes into account the switching of EVB mode from one to
+ * another and reconfigure hardware resources as reqiured. The
+ * switching from VEB to VEPA mode requires the disabling of the
+ * loopback traffic. Additionally, source knockouts are handled
+ * differently in VEB and VEPA modes.
*/
uint8_t evb_mode;
/* No Edge Virtual Bridging (EVB) */
uint16_t num_mcast_filters;
/* Used by a PF driver to associate a SCHQ with a VF. */
uint16_t schq_id;
- uint8_t unused_0[6];
+ uint16_t mpc_chnls;
+ /*
+ * When this bit is '1', the caller requests to enable a MPC
+ * channel with destination to the TX crypto engine block.
+ * When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_TCE_ENABLE UINT32_C(0x1)
+ /*
+ * When this bit is '1', the caller requests to disable a MPC
+ * channel with destination to the TX crypto engine block.
+ * When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_TCE_DISABLE UINT32_C(0x2)
+ /*
+ * When this bit is '1', the caller requests to enable a MPC
+ * channel with destination to the RX crypto engine block.
+ * When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_RCE_ENABLE UINT32_C(0x4)
+ /*
+ * When this bit is '1', the caller requests to disable a MPC
+ * channel with destination to the RX crypto engine block.
+ * When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_RCE_DISABLE UINT32_C(0x8)
+ /*
+ * When this bit is '1', the caller requests to enable a MPC
+ * channel with destination to the TX configurable flow processing
+ * block. When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_TE_CFA_ENABLE \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the caller requests to disable a MPC
+ * channel with destination to the TX configurable flow processing
+ * block. When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_TE_CFA_DISABLE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the caller requests to enable a MPC
+ * channel with destination to the RX configurable flow processing
+ * block. When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_RE_CFA_ENABLE \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1', the caller requests to disable a MPC
+ * channel with destination to the RX configurable flow processing
+ * block. When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_RE_CFA_DISABLE \
+ UINT32_C(0x80)
+ /*
+ * When this bit is '1', the caller requests to enable a MPC
+ * channel with destination to the primate processor block.
+ * When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_PRIMATE_ENABLE \
+ UINT32_C(0x100)
+ /*
+ * When this bit is '1', the caller requests to disable a MPC
+ * channel with destination to the primate processor block.
+ * When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_PRIMATE_DISABLE \
+ UINT32_C(0x200)
+ /*
+ * Minimum guaranteed bandwidth for the network partition made up
+ * of the caller physical function and all its child virtual
+ * functions. The rate is specified as a percentage of the bandwidth
+ * of the link the partition is associated with. A value of 0
+ * indicates that no minimum bandwidth is configured. The sum of the
+ * minimum bandwidths for all partitions on a link must not exceed
+ * 100%.
+ * The format of this field is defined to match min_bw, even though
+ * it does not allow all the options for min_bw at this time.
+ */
+ uint32_t partition_min_bw;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_SFT \
+ 0
+ /*
+ * The granularity of the value (bits or bytes). Firmware ignores
+ * this field.
+ */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE_LAST \
+ HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_SCALE_BYTES
+ /* Bandwidth units. Must be set to percent1_100. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in hundredths of a percent of link bandwidth. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_LAST \
+ HWRM_FUNC_CFG_INPUT_PARTITION_MIN_BW_BW_VALUE_UNIT_PERCENT1_100
+ /*
+ * The maximum bandwidth that may be used by the network partition
+ * made up of the caller physical function and all its child virtual
+ * functions. The rate is specified as a percentage of the bandwidth
+ * of the link the partition is associated with. A value of 0
+ * indicates that no maximum bandwidth is configured.
+ * The format of this field is defined to match max_bw, even though it
+ * does not allow all the options for max_bw at this time.
+ */
+ uint32_t partition_max_bw;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_SFT \
+ 0
+ /*
+ * The granularity of the value (bits or bytes). Firmware ignores
+ * this field.
+ */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE \
+ UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE_BITS \
+ (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE_LAST \
+ HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_SCALE_BYTES
+ /* Bandwidth units. Must be set to percent1_100. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_SFT \
+ 29
+ /* Value is in hundredths of a percent of link bandwidth. */
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ #define HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_LAST \
+ HWRM_FUNC_CFG_INPUT_PARTITION_MAX_BW_BW_VALUE_UNIT_PERCENT1_100
+ /*
+ * The TPID for the function for which default VLAN
+ * is configured. If the dflt_vlan is not specified
+ * with the TPID, FW returns error. If the TPID is
+ * not specified with dflt_vlan, the default TPID of
+ * 0x8100 will be used. This field is specified in
+ * network byte order.
+ */
+ uint16_t tpid;
+ /*
+ * This field can be used by the host PF to configure
+ * mtu value.
+ * The maximum transmission unit of the function.
+ * The HWRM should make sure that the mtu of
+ * the function does not exceed the mtu of the physical
+ * port that this function is associated with.
+ *
+ * In addition to configuring mtu per function, it is
+ * possible to configure mtu per transmit ring.
+ * By default, the mtu of each transmit ring associated
+ * with a function is equal to the mtu of the function.
+ * The HWRM should make sure that the mtu of each transmit
+ * ring that is assigned to a function has a valid mtu.
+ */
+ uint16_t host_mtu;
} __rte_packed;
/* hwrm_func_cfg_output (size:128b/16B) */
uint8_t unused_1[4];
} __rte_packed;
-/* hwrm_func_qstats_ext_output (size:1472b/184B) */
+/* hwrm_func_qstats_ext_output (size:1536b/192B) */
struct hwrm_func_qstats_ext_output {
/* The specific error status for the command. */
uint16_t error_code;
uint64_t rx_tpa_bytes;
/* Number of TPA errors */
uint64_t rx_tpa_errors;
+ /* Number of TPA errors */
+ uint64_t rx_tpa_events;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
*/
#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_MASTER_SUPPORT \
UINT32_C(0x40)
+ /*
+ * When this bit is 1, the function is indicating the support of the
+ * fast reset capability. Fast reset support will be used by
+ * firmware only if all the driver instances support fast reset
+ * process. By setting this bit, driver is indicating support for
+ * corresponding async event completion message. These will be
+ * delivered to the driver even if they did not register for it.
+ * If supported, after receiving reset notify async event with fast
+ * reset flag set in event data1, then all the drivers have to tear
+ * down their resources without sending any HWRM commands to FW.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FAST_RESET_SUPPORT \
+ UINT32_C(0x80)
+ /*
+ * When this bit is 1, the function's driver is indicating the
+ * support of handling the vnic_rss_cfg's INVALID_PARAM error
+ * returned by firmware. Firmware returns error, if host driver
+ * configures the invalid hash_types bit combination for a given
+ * IP version.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_RSS_STRICT_HASH_TYPE_SUPPORT \
+ UINT32_C(0x100)
uint32_t enables;
/*
* This bit must be '1' for the os_type field to be
uint8_t valid;
} __rte_packed;
+/*****************************
+ * hwrm_func_vf_resource_cfg *
+ *****************************/
+
+
+/* hwrm_func_vf_resource_cfg_input (size:448b/56B) */
+struct hwrm_func_vf_resource_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* VF ID that is being configured by PF */
+ uint16_t vf_id;
+ /* Maximum guaranteed number of MSI-X vectors for the function */
+ uint16_t max_msix;
+ /* Minimum guaranteed number of RSS/COS contexts */
+ uint16_t min_rsscos_ctx;
+ /* Maximum non-guaranteed number of RSS/COS contexts */
+ uint16_t max_rsscos_ctx;
+ /* Minimum guaranteed number of completion rings */
+ uint16_t min_cmpl_rings;
+ /* Maximum non-guaranteed number of completion rings */
+ uint16_t max_cmpl_rings;
+ /* Minimum guaranteed number of transmit rings */
+ uint16_t min_tx_rings;
+ /* Maximum non-guaranteed number of transmit rings */
+ uint16_t max_tx_rings;
+ /* Minimum guaranteed number of receive rings */
+ uint16_t min_rx_rings;
+ /* Maximum non-guaranteed number of receive rings */
+ uint16_t max_rx_rings;
+ /* Minimum guaranteed number of L2 contexts */
+ uint16_t min_l2_ctxs;
+ /* Maximum non-guaranteed number of L2 contexts */
+ uint16_t max_l2_ctxs;
+ /* Minimum guaranteed number of VNICs */
+ uint16_t min_vnics;
+ /* Maximum non-guaranteed number of VNICs */
+ uint16_t max_vnics;
+ /* Minimum guaranteed number of statistic contexts */
+ uint16_t min_stat_ctx;
+ /* Maximum non-guaranteed number of statistic contexts */
+ uint16_t max_stat_ctx;
+ /* Minimum guaranteed number of ring groups */
+ uint16_t min_hw_ring_grps;
+ /* Maximum non-guaranteed number of ring groups */
+ uint16_t max_hw_ring_grps;
+ uint16_t flags;
+ /*
+ * If this bit is set, all minimum resources requested should be
+ * reserved if minimum >= 1, otherwise return error. In case of
+ * error, keep all existing reservations before the call.
+ */
+ #define HWRM_FUNC_VF_RESOURCE_CFG_INPUT_FLAGS_MIN_GUARANTEED \
+ UINT32_C(0x1)
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_func_vf_resource_cfg_output (size:256b/32B) */
+struct hwrm_func_vf_resource_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Reserved number of RSS/COS contexts */
+ uint16_t reserved_rsscos_ctx;
+ /* Reserved number of completion rings */
+ uint16_t reserved_cmpl_rings;
+ /* Reserved number of transmit rings */
+ uint16_t reserved_tx_rings;
+ /* Reserved number of receive rings */
+ uint16_t reserved_rx_rings;
+ /* Reserved number of L2 contexts */
+ uint16_t reserved_l2_ctxs;
+ /* Reserved number of VNICs */
+ uint16_t reserved_vnics;
+ /* Reserved number of statistic contexts */
+ uint16_t reserved_stat_ctx;
+ /* Reserved number of ring groups */
+ uint16_t reserved_hw_ring_grps;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
/*********************************
* hwrm_func_backing_store_qcaps *
*********************************/
uint64_t resp_addr;
} __rte_packed;
-/* hwrm_func_backing_store_qcaps_output (size:640b/80B) */
+/* hwrm_func_backing_store_qcaps_output (size:832b/104B) */
struct hwrm_func_backing_store_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
* before the first time context load.
*/
uint8_t ctx_kind_initializer;
- /* Reserved for future. */
- uint32_t rsvd;
- /* Reserved for future. */
- uint16_t rsvd1;
+ /*
+ * Specifies which context kinds need to be initialized with the
+ * ctx_kind_initializer.
+ */
+ uint16_t ctx_init_mask;
+ /*
+ * If this bit is '1' then this context type should be initialized
+ * with the ctx_kind_initializer at the specified offset.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_QP \
+ UINT32_C(0x1)
+ /*
+ * If this bit is '1' then this context type should be initialized
+ * with the ctx_kind_initializer at the specified offset.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_SRQ \
+ UINT32_C(0x2)
+ /*
+ * If this bit is '1' then this context type should be initialized
+ * with the ctx_kind_initializer at the specified offset.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_CQ \
+ UINT32_C(0x4)
+ /*
+ * If this bit is '1' then this context type should be initialized
+ * with the ctx_kind_initializer at the specified offset.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_VNIC \
+ UINT32_C(0x8)
+ /*
+ * If this bit is '1' then this context type should be initialized
+ * with the ctx_kind_initializer at the specified offset.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_STAT \
+ UINT32_C(0x10)
+ /*
+ * If this bit is '1' then this context type should be initialized
+ * with the ctx_kind_initializer at the specified offset.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_MRAV \
+ UINT32_C(0x20)
+ /*
+ * If this bit is '1' then the Tx KTLS context type should be
+ * initialized with the ctx_kind_initializer at the specified offset.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_TKC \
+ UINT32_C(0x40)
+ /*
+ * If this bit is '1' then the Rx KTLS context type should be
+ * initialized with the ctx_kind_initializer at the specified offset.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCAPS_OUTPUT_CTX_INIT_MASK_RKC \
+ UINT32_C(0x80)
+ /*
+ * Specifies the doubleword offset of ctx_kind_initializer for this
+ * context type.
+ */
+ uint8_t qp_init_offset;
+ /*
+ * Specifies the doubleword offset of ctx_kind_initializer for this
+ * context type.
+ */
+ uint8_t srq_init_offset;
+ /*
+ * Specifies the doubleword offset of ctx_kind_initializer for this
+ * context type.
+ */
+ uint8_t cq_init_offset;
+ /*
+ * Specifies the doubleword offset of ctx_kind_initializer for this
+ * context type.
+ */
+ uint8_t vnic_init_offset;
/*
* Count of TQM fastpath rings to be used for allocating backing store.
* Backing store configuration must be specified for each TQM ring from
* this count in `backing_store_cfg`.
+ * Only first 8 TQM FP rings will be advertised with this field.
*/
uint8_t tqm_fp_rings_count;
+ /*
+ * Specifies the doubleword offset of ctx_kind_initializer for this
+ * context type.
+ */
+ uint8_t stat_init_offset;
+ /*
+ * Specifies the doubleword offset of ctx_kind_initializer for this
+ * context type.
+ */
+ uint8_t mrav_init_offset;
+ /*
+ * Count of TQM extended fastpath rings to be used for allocating
+ * backing store beyond 8 rings(rings 9,10,11)
+ * Backing store configuration must be specified for each TQM ring from
+ * this count in `backing_store_cfg`.
+ */
+ uint8_t tqm_fp_rings_count_ext;
+ /*
+ * Specifies the doubleword offset of ctx_kind_initializer for Tx
+ * KTLS context type.
+ */
+ uint8_t tkc_init_offset;
+ /*
+ * Specifies the doubleword offset of ctx_kind_initializer for Rx
+ * KTLS context type.
+ */
+ uint8_t rkc_init_offset;
+ /* Tx KTLS context entry size in bytes. */
+ uint16_t tkc_entry_size;
+ /* Rx KTLS context entry size in bytes. */
+ uint16_t rkc_entry_size;
+ /*
+ * Maximum number of Tx KTLS context entries supported for this
+ * function.
+ */
+ uint32_t tkc_max_entries;
+ /*
+ * Maximum number of Rx KTLS context entries supported for this
+ * function.
+ */
+ uint32_t rkc_max_entries;
+ /* Reserved for future. */
+ uint8_t rsvd[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
uint8_t valid;
} __rte_packed;
+/* tqm_fp_ring_cfg (size:128b/16B) */
+struct tqm_fp_ring_cfg {
+ /* TQM ring page size and level. */
+ uint8_t tqm_ring_pg_size_tqm_ring_lvl;
+ /* TQM ring PBL indirect levels. */
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_LVL_MASK \
+ UINT32_C(0xf)
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_LVL_LAST \
+ TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_LVL_LVL_2
+ /* TQM ring page size. */
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_PG_SIZE_LAST \
+ TQM_FP_RING_CFG_TQM_RING_CFG_TQM_RING_PG_SIZE_PG_1G
+ uint8_t unused[3];
+ /* Number of TQM ring entries. */
+ uint32_t tqm_ring_num_entries;
+ /* TQM ring page directory. */
+ uint64_t tqm_ring_page_dir;
+} __rte_packed;
+
/*******************************
* hwrm_func_backing_store_cfg *
*******************************/
-/* hwrm_func_backing_store_cfg_input (size:2048b/256B) */
+/* hwrm_func_backing_store_cfg_input (size:2688b/336B) */
struct hwrm_func_backing_store_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
*/
#define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TIM \
UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the tqm_ring8 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING8 \
+ UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the tqm_ring9 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING9 \
+ UINT32_C(0x20000)
+ /*
+ * This bit must be '1' for the tqm_ring10 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING10 \
+ UINT32_C(0x40000)
+ /*
+ * This bit must be '1' for the Tx KTLS context
+ * fields to be configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TKC \
+ UINT32_C(0x80000)
+ /*
+ * This bit must be '1' for the Rx KTLS context
+ * fields to be configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_RKC \
+ UINT32_C(0x100000)
/* QPC page size and level. */
uint8_t qpc_pg_size_qpc_lvl;
/* QPC PBL indirect levels. */
uint16_t mrav_entry_size;
/* Number of bytes that have been allocated for each context entry. */
uint16_t tim_entry_size;
+ /* TQM ring page size and level. */
+ uint8_t tqm_ring8_pg_size_tqm_ring_lvl;
+ /* TQM ring PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_LVL_SFT \
+ 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_LVL_LVL_2
+ /* TQM ring page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_PG_SIZE_SFT \
+ 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING8_TQM_RING_PG_SIZE_PG_1G
+ uint8_t ring8_unused[3];
+ /* Number of TQM ring entries. */
+ uint32_t tqm_ring8_num_entries;
+ /* TQM ring page directory. */
+ uint64_t tqm_ring8_page_dir;
+ /* TQM ring page size and level. */
+ uint8_t tqm_ring9_pg_size_tqm_ring_lvl;
+ /* TQM ring PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_LVL_SFT \
+ 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_LVL_LVL_2
+ /* TQM ring page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_PG_SIZE_SFT \
+ 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING9_TQM_RING_PG_SIZE_PG_1G
+ uint8_t ring9_unused[3];
+ /* Number of TQM ring entries. */
+ uint32_t tqm_ring9_num_entries;
+ /* TQM ring page directory. */
+ uint64_t tqm_ring9_page_dir;
+ /* TQM ring page size and level. */
+ uint8_t tqm_ring10_pg_size_tqm_ring_lvl;
+ /* TQM ring PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_LVL_SFT \
+ 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_LVL_LVL_2
+ /* TQM ring page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_PG_SIZE_SFT \
+ 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_RING10_TQM_RING_PG_SIZE_PG_1G
+ uint8_t ring10_unused[3];
+ /* Number of TQM ring entries. */
+ uint32_t tqm_ring10_num_entries;
+ /* TQM ring page directory. */
+ uint64_t tqm_ring10_page_dir;
+ /* Number of Tx KTLS context entries allocated. */
+ uint32_t tkc_num_entries;
+ /* Number of Rx KTLS context entries allocated. */
+ uint32_t rkc_num_entries;
+ /* Tx KTLS context page directory. */
+ uint64_t tkc_page_dir;
+ /* Rx KTLS context page directory. */
+ uint64_t rkc_page_dir;
+ /* Number of bytes allocated for each Tx KTLS context entry. */
+ uint16_t tkc_entry_size;
+ /* Number of bytes allocated for each Rx KTLS context entry. */
+ uint16_t rkc_entry_size;
+ /* Tx KTLS context page size and level. */
+ uint8_t tkc_pg_size_tkc_lvl;
+ /* Tx KTLS context PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_LVL_LVL_2
+ /* Tx KTLS context page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TKC_PG_SIZE_PG_1G
+ /* Rx KTLS context page size and level. */
+ uint8_t rkc_pg_size_rkc_lvl;
+ /* Rx KTLS context PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_LVL_LVL_2
+ /* Rx KTLS context page size. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_CFG_INPUT_RKC_PG_SIZE_PG_1G
+ /* Reserved for future. */
+ uint8_t rsvd[2];
} __rte_packed;
/* hwrm_func_backing_store_cfg_output (size:128b/16B) */
uint64_t resp_addr;
} __rte_packed;
-/* hwrm_func_backing_store_qcfg_output (size:1920b/240B) */
+/* hwrm_func_backing_store_qcfg_output (size:2496b/312B) */
struct hwrm_func_backing_store_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
*/
#define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_FLAGS_MRAV_RESERVATION_SPLIT \
UINT32_C(0x2)
- uint8_t unused_0[4];
+ uint32_t enables;
/*
* This bit must be '1' for the qp fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_QP \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_QP \
UINT32_C(0x1)
/*
* This bit must be '1' for the srq fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_SRQ \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_SRQ \
UINT32_C(0x2)
/*
* This bit must be '1' for the cq fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_CQ \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_CQ \
UINT32_C(0x4)
/*
* This bit must be '1' for the vnic fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_VNIC \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_VNIC \
UINT32_C(0x8)
/*
* This bit must be '1' for the stat fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_STAT \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_STAT \
UINT32_C(0x10)
/*
* This bit must be '1' for the tqm_sp fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_SP \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_SP \
UINT32_C(0x20)
/*
* This bit must be '1' for the tqm_ring0 fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING0 \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING0 \
UINT32_C(0x40)
/*
* This bit must be '1' for the tqm_ring1 fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING1 \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING1 \
UINT32_C(0x80)
/*
* This bit must be '1' for the tqm_ring2 fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING2 \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING2 \
UINT32_C(0x100)
/*
* This bit must be '1' for the tqm_ring3 fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING3 \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING3 \
UINT32_C(0x200)
/*
* This bit must be '1' for the tqm_ring4 fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING4 \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING4 \
UINT32_C(0x400)
/*
* This bit must be '1' for the tqm_ring5 fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING5 \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING5 \
UINT32_C(0x800)
/*
* This bit must be '1' for the tqm_ring6 fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING6 \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING6 \
UINT32_C(0x1000)
/*
* This bit must be '1' for the tqm_ring7 fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING7 \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING7 \
UINT32_C(0x2000)
/*
* This bit must be '1' for the mrav fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_MRAV \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_MRAV \
UINT32_C(0x4000)
/*
* This bit must be '1' for the tim fields to be
* configured.
*/
- #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TIM \
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TIM \
UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the tqm_ring8 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING8 \
+ UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the tqm_ring9 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING9 \
+ UINT32_C(0x20000)
+ /*
+ * This bit must be '1' for the tqm_ring10 fields to be
+ * configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TQM_RING10 \
+ UINT32_C(0x40000)
+ /*
+ * This bit must be '1' for the Tx KTLS context
+ * fields to be configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_TKC \
+ UINT32_C(0x80000)
+ /*
+ * This bit must be '1' for the Rx KTLS context
+ * fields to be configured.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_ENABLES_RKC \
+ UINT32_C(0x100000)
/* QPC page size and level. */
uint8_t qpc_pg_size_qpc_lvl;
/* QPC PBL indirect levels. */
uint32_t mrav_num_entries;
/* Number of Timer entries. */
uint32_t tim_num_entries;
- uint8_t unused_1[7];
+ /* TQM ring page size and level. */
+ uint8_t tqm_ring8_pg_size_tqm_ring_lvl;
+ /* TQM ring PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_LVL_SFT \
+ 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_LVL_LVL_2
+ /* TQM ring page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_PG_SIZE_SFT \
+ 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING8_TQM_RING_PG_SIZE_PG_1G
+ uint8_t ring8_unused[3];
+ /* Number of TQM ring entries. */
+ uint32_t tqm_ring8_num_entries;
+ /* TQM ring page directory. */
+ uint64_t tqm_ring8_page_dir;
+ /* TQM ring page size and level. */
+ uint8_t tqm_ring9_pg_size_tqm_ring_lvl;
+ /* TQM ring PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_LVL_SFT \
+ 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_LVL_LVL_2
+ /* TQM ring page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_PG_SIZE_SFT \
+ 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING9_TQM_RING_PG_SIZE_PG_1G
+ uint8_t ring9_unused[3];
+ /* Number of TQM ring entries. */
+ uint32_t tqm_ring9_num_entries;
+ /* TQM ring page directory. */
+ uint64_t tqm_ring9_page_dir;
+ /* TQM ring page size and level. */
+ uint8_t tqm_ring10_pg_size_tqm_ring_lvl;
+ /* TQM ring PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_LVL_SFT \
+ 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_LVL_LVL_2
+ /* TQM ring page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_PG_SIZE_SFT \
+ 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RING10_TQM_RING_PG_SIZE_PG_1G
+ uint8_t ring10_unused[3];
+ /* Number of TQM ring entries. */
+ uint32_t tqm_ring10_num_entries;
+ /* TQM ring page directory. */
+ uint64_t tqm_ring10_page_dir;
+ /* Number of Tx KTLS context entries. */
+ uint32_t tkc_num_entries;
+ /* Number of Rx KTLS context entries. */
+ uint32_t rkc_num_entries;
+ /* Tx KTLS context page directory. */
+ uint64_t tkc_page_dir;
+ /* Rx KTLS context page directory. */
+ uint64_t rkc_page_dir;
+ /* Tx KTLS context page size and level. */
+ uint8_t tkc_pg_size_tkc_lvl;
+ /* Tx KTLS context PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_LVL_LVL_2
+ /* Tx KTLS context page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TKC_PG_SIZE_PG_1G
+ /* Rx KTLS context page size and level. */
+ uint8_t rkc_pg_size_rkc_lvl;
+ /* Rx KTLS context PBL indirect levels. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_MASK \
+ UINT32_C(0xf)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_SFT 0
+ /* PBL pointer is physical start address. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LVL_0 \
+ UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LVL_1 \
+ UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to
+ * PTE tables.
+ */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LVL_2 \
+ UINT32_C(0x2)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_LVL_LVL_2
+ /* Rx KTLS context page size. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_SFT 4
+ /* 4KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_4K \
+ (UINT32_C(0x0) << 4)
+ /* 8KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_8K \
+ (UINT32_C(0x1) << 4)
+ /* 64KB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_64K \
+ (UINT32_C(0x2) << 4)
+ /* 2MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_2M \
+ (UINT32_C(0x3) << 4)
+ /* 8MB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_8M \
+ (UINT32_C(0x4) << 4)
+ /* 1GB. */
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_1G \
+ (UINT32_C(0x5) << 4)
+ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_LAST \
+ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_RKC_PG_SIZE_PG_1G
+ uint8_t unused_1[5];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as 1
uint8_t valid;
} __rte_packed;
+/***************************
+ * hwrm_func_echo_response *
+ ****************************/
+
+
+/* hwrm_func_echo_response_input (size:192b/24B) */
+struct hwrm_func_echo_response_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * 0x0-0xFFF8 - The function ID
+ * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * 0xFFFD - Reserved for user-space HWRM interface
+ * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t event_data1;
+ uint32_t event_data2;
+} __rte_packed;
+
+/* hwrm_func_echo_response_output (size:128b/16B) */
+struct hwrm_func_echo_response_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
/***********************
* hwrm_func_vlan_qcfg *
***********************/
uint8_t valid;
} __rte_packed;
+/*********************
+ * hwrm_func_spd_cfg *
+ *********************/
+
+
+/* hwrm_func_spd_cfg_input (size:384b/48B) */
+struct hwrm_func_spd_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /* Set this bit is '1' to enable the SPD datapath forwarding. */
+ #define HWRM_FUNC_SPD_CFG_INPUT_FLAGS_FWD_ENABLE UINT32_C(0x1)
+ /* Set this bit is '1' to disable the SPD datapath forwarding. */
+ #define HWRM_FUNC_SPD_CFG_INPUT_FLAGS_FWD_DISABLE UINT32_C(0x2)
+ /*
+ * Set this bit is '1' to enable the SPD datapath checksum
+ * feature.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_FLAGS_CSUM_ENABLE UINT32_C(0x4)
+ /*
+ * Set this bit is '1' to disable the SPD datapath checksum
+ * feature.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_FLAGS_CSUM_DISABLE UINT32_C(0x8)
+ /*
+ * Set this bit is '1' to enable the SPD datapath debug
+ * feature.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_FLAGS_DBG_ENABLE UINT32_C(0x10)
+ /*
+ * Set this bit is '1' to disable the SPD datapath debug
+ * feature.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_FLAGS_DBG_DISABLE UINT32_C(0x20)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the ethertype field to be
+ * configured.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_ENABLES_ETHERTYPE \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the hash_mode_flags field to be
+ * configured.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_ENABLES_HASH_MODE_FLAGS \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the hash_type field to be
+ * configured.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_ENABLES_HASH_TYPE \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the ring_tbl_addr field to be
+ * configured.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_ENABLES_RING_TBL_ADDR \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the hash_key_tbl_addr field to be
+ * configured.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_ENABLES_HASH_KEY_TBL_ADDR \
+ UINT32_C(0x10)
+ /*
+ * Ethertype value used in the encapsulated SPD packet header.
+ * The user must choose a value that is not conflicting with
+ * publicly defined ethertype values. By default, the ethertype
+ * value of 0xffff is used if there is no user specified value.
+ */
+ uint16_t ethertype;
+ /* Flags to specify different RSS hash modes. */
+ uint8_t hash_mode_flags;
+ /*
+ * When this bit is '1', it indicates using current RSS
+ * hash mode setting configured in the device.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
+ * l4.src, l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_4 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_2 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
+ * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
+ UINT32_C(0x10)
+ uint8_t unused_1;
+ uint32_t hash_type;
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv4
+ * packets.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of TCP/IPv4 packets.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of UDP/IPv4 packets.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv6
+ * packets.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of TCP/IPv6 packets.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of UDP/IPv6 packets.
+ */
+ #define HWRM_FUNC_SPD_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ /* This is the address for rss ring group table */
+ uint64_t ring_grp_tbl_addr;
+ /* This is the address for rss hash key table */
+ uint64_t hash_key_tbl_addr;
+} __rte_packed;
+
+/* hwrm_func_spd_cfg_output (size:128b/16B) */
+struct hwrm_func_spd_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_func_spd_qcfg *
+ **********************/
+
+
+/* hwrm_func_spd_qcfg_input (size:128b/16B) */
+struct hwrm_func_spd_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_func_spd_qcfg_output (size:512b/64B) */
+struct hwrm_func_spd_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t flags;
+ /*
+ * The SPD datapath forwarding is currently enabled when this
+ * flag is set to '1'.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_FLAGS_FWD_ENABLED UINT32_C(0x1)
+ /*
+ * The SPD datapath checksum feature is currently enabled when
+ * this flag is set to '1'.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_FLAGS_CSUM_ENABLED UINT32_C(0x2)
+ /*
+ * The SPD datapath debug feature is currently enabled when
+ * this flag is set to '1'.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_FLAGS_DBG_ENABLED UINT32_C(0x4)
+ uint32_t hash_type;
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv4
+ * packets.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of TCP/IPv4 packets.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv4 addresses and
+ * source/destination ports of UDP/IPv4 packets.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source and destination IPv4 addresses of IPv6
+ * packets.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of TCP/IPv6 packets.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ /*
+ * When this bit is '1', the RSS hash shall be computed
+ * over source/destination IPv6 addresses and
+ * source/destination ports of UDP/IPv6 packets.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ /* This is the value of rss hash key */
+ uint32_t hash_key[10];
+ /* Flags to specify different RSS hash modes. */
+ uint8_t hash_mode_flags;
+ /*
+ * When this bit is '1', it indicates using current RSS
+ * hash mode setting configured in the device.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_HASH_MODE_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 4 tuples {l3.src, l3.dest,
+ * l4.src, l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_4 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_2 \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest,
+ * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel
+ * packets, the RSS hash is computed over the normal
+ * src/dest l3 and src/dest l4 headers.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_4 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates requesting support of
+ * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for
+ * tunnel packets. For none-tunnel packets, the RSS hash is
+ * computed over the normal src/dest l3 headers.
+ */
+ #define HWRM_FUNC_SPD_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_2 \
+ UINT32_C(0x10)
+ uint8_t unused_1;
+ /*
+ * Ethertype value used in the encapsulated SPD packet header.
+ * The user must choose a value that is not conflicting with
+ * publicly defined ethertype values. By default, the ethertype
+ * value of 0xffff is used if there is no user specified value.
+ */
+ uint16_t ethertype;
+ uint8_t unused_2[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
/*********************
* hwrm_port_phy_cfg *
*********************/
* When set to 1, then the HWRM shall enable FEC autonegotitation
* on this port if supported. When enabled, at least one of the
* FEC modes must be advertised by enabling the fec_clause_74_enable,
- * fec_clause_91_enable, fec_rs544_1xn_enable, or fec_rs544_2xn_enable
- * flag. If none of the FEC mode is currently enabled, the HWRM
- * shall choose a default advertisement setting.
+ * fec_clause_91_enable, fec_rs544_1xn_enable, fec_rs544_ieee_enable,
+ * fec_rs272_1xn_enable, or fec_rs272_ieee_enable flag. If none
+ * of the FEC mode is currently enabled, the HWRM shall choose
+ * a default advertisement setting.
* The default advertisement setting can be queried by calling
* hwrm_port_phy_qcfg. Note that the link speed must be
* in autonegotiation mode for FEC autonegotiation to take effect.
UINT32_C(0x100)
/*
* When set to 1, then the HWRM shall disable FEC autonegotiation
- * on this port if supported.
+ * on this port and use forced FEC mode. In forced FEC mode, one
+ * or more FEC forced settings under the same clause can be set.
* When set to 0, then this flag shall be ignored.
* If FEC autonegotiation is not supported, then the HWRM shall ignore this
* flag.
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE \
UINT32_C(0x800)
/*
- * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed Solomon)
- * on this port if supported, by advertising FEC CLAUSE 91 if
- * FEC autonegotiation is enabled or force enabled otherwise.
+ * When set to 1, then the HWRM shall enable FEC CLAUSE 91
+ * (Reed Solomon RS(528,514) for NRZ) on this port if supported,
+ * by advertising FEC RS(528,514) if FEC autonegotiation is enabled
+ * or force enabled otherwise. In forced FEC mode, this flag
+ * will only take effect if the speed is NRZ. Additional
+ * RS544 or RS272 flags (also under clause 91) may be set for PAM4
+ * in forced FEC mode.
* When set to 0, then this flag shall be ignored.
- * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this
- * flag.
+ * If FEC RS(528,514) is not supported, then the HWRM shall ignore
+ * this flag.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE \
UINT32_C(0x1000)
/*
- * When set to 1, then the HWRM shall disable FEC CLAUSE 91 (Reed Solomon)
- * on this port if supported, by not advertising FEC CLAUSE 91 if
- * FEC autonegotiation is enabled or force disabled otherwise.
- * When set to 0, then this flag shall be ignored.
- * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this
- * flag.
+ * When set to 1, then the HWRM shall disable FEC CLAUSE 91
+ * (Reed Solomon RS(528,514) for NRZ) on this port if supported, by
+ * not advertising RS(528,514) if FEC autonegotiation is enabled or
+ * force disabled otherwise. When set to 0, then this flag shall be
+ * ignored. If FEC RS(528,514) is not supported, then the HWRM
+ * shall ignore this flag.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE \
UINT32_C(0x2000)
* When set to 1, then the HWRM shall enable FEC RS544_1XN
* on this port if supported, by advertising FEC RS544_1XN if
* FEC autonegotiation is enabled or force enabled otherwise.
+ * In forced mode, this flag will only take effect if the speed is
+ * PAM4. If this flag and fec_rs544_ieee_enable are set, the
+ * HWRM shall choose one of the RS544 modes.
* When set to 0, then this flag shall be ignored.
* If FEC RS544_1XN is not supported, then the HWRM shall ignore this
* flag.
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_1XN_DISABLE \
UINT32_C(0x10000)
/*
- * When set to 1, then the HWRM shall enable FEC RS544_2XN
- * on this port if supported, by advertising FEC RS544_2XN if
+ * When set to 1, then the HWRM shall enable FEC RS(544,514)
+ * on this port if supported, by advertising FEC RS(544,514) if
* FEC autonegotiation is enabled or force enabled otherwise.
+ * In forced mode, this flag will only take effect if the speed is
+ * PAM4. If this flag and fec_rs544_1xn_enable are set, the
+ * HWRM shall choose one of the RS544 modes.
* When set to 0, then this flag shall be ignored.
- * If FEC RS544_2XN is not supported, then the HWRM shall ignore this
- * flag.
+ * If FEC RS(544,514) is not supported, then the HWRM shall ignore
+ * this flag.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_2XN_ENABLE \
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_IEEE_ENABLE \
UINT32_C(0x20000)
/*
- * When set to 1, then the HWRM shall disable FEC RS544_2XN
- * on this port if supported, by not advertising FEC RS544_2XN if
+ * When set to 1, then the HWRM shall disable FEC RS(544,514)
+ * on this port if supported, by not advertising FEC RS(544,514) if
* FEC autonegotiation is enabled or force disabled otherwise.
* When set to 0, then this flag shall be ignored.
- * If FEC RS544_2XN is not supported, then the HWRM shall ignore this
- * flag.
+ * If FEC RS(544,514) is not supported, then the HWRM shall ignore
+ * this flag.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_2XN_DISABLE \
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_IEEE_DISABLE \
UINT32_C(0x40000)
+ /*
+ * When set to 1, then the HWRM shall enable FEC RS272_1XN
+ * on this port if supported, by advertising FEC RS272_1XN if
+ * FEC autonegotiation is enabled or force enabled otherwise.
+ * In forced mode, this flag will only take effect if the speed is
+ * PAM4. If this flag and fec_rs272_ieee_enable are set, the
+ * HWRM shall choose one of the RS272 modes. Note that RS272
+ * and RS544 modes cannot be set at the same time in forced FEC mode.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC RS272_1XN is not supported, then the HWRM shall ignore this
+ * flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS272_1XN_ENABLE \
+ UINT32_C(0x80000)
+ /*
+ * When set to 1, then the HWRM shall disable FEC RS272_1XN
+ * on this port if supported, by not advertising FEC RS272_1XN if
+ * FEC autonegotiation is enabled or force disabled otherwise.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC RS272_1XN is not supported, then the HWRM shall ignore
+ * this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS272_1XN_DISABLE \
+ UINT32_C(0x100000)
+ /*
+ * When set to 1, then the HWRM shall enable FEC RS(272,257)
+ * on this port if supported, by advertising FEC RS(272,257) if
+ * FEC autonegotiation is enabled or force enabled otherwise.
+ * In forced mode, this flag will only take effect if the speed is
+ * PAM4. If this flag and fec_rs272_1xn_enable are set, the
+ * HWRM shall choose one of the RS272 modes. Note that RS272
+ * and RS544 modes cannot be set at the same time in forced FEC mode.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC RS(272,257) is not supported, then the HWRM shall ignore
+ * this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS272_IEEE_ENABLE \
+ UINT32_C(0x200000)
+ /*
+ * When set to 1, then the HWRM shall disable FEC RS(272,257)
+ * on this port if supported, by not advertising FEC RS(272,257) if
+ * FEC autonegotiation is enabled or force disabled otherwise.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC RS(272,257) is not supported, then the HWRM shall ignore
+ * this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS272_IEEE_DISABLE \
+ UINT32_C(0x400000)
uint32_t enables;
/*
* This bit must be '1' for the auto_mode field to be
*/
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER \
UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the force_pam4_link_speed field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAM4_LINK_SPEED \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the auto_pam4_link_speed_mask field to
+ * be configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAM4_LINK_SPEED_MASK \
+ UINT32_C(0x1000)
/* Port ID of port that is to be configured. */
uint16_t port_id;
/*
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
/* 100Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8)
- /* 200Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_200GB UINT32_C(0x7d0)
/* 10Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_LAST \
*/
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
/*
- * Select the speeds based on the corresponding link speed mask value
- * that is provided.
+ * Select the speeds based on the corresponding link speed mask values
+ * that are provided. The included speeds are specified in the
+ * auto_link_speed and auto_pam4_link_speed fields.
*/
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4)
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_LAST \
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
/* 100Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
- /* 200Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_200GB UINT32_C(0x7d0)
/* 10Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_LAST \
/* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB \
UINT32_C(0x2000)
- /* 200Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_200GB \
- UINT32_C(0x4000)
/* This value controls the wirespeed feature. */
uint8_t wirespeed;
/* Wirespeed feature is disabled. */
uint32_t tx_lpi_timer;
#define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
#define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0
- uint32_t unused_3;
+ /* This field specifies which PAM4 speeds are enabled for auto mode. */
+ uint16_t auto_link_pam4_speed_mask;
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_PAM4_SPEED_MASK_50G \
+ UINT32_C(0x1)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_PAM4_SPEED_MASK_100G \
+ UINT32_C(0x2)
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_PAM4_SPEED_MASK_200G \
+ UINT32_C(0x4)
+ uint8_t unused_2[2];
} __rte_packed;
/* hwrm_port_phy_cfg_output (size:128b/16B) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK UINT32_C(0x2)
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LAST \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK
- uint8_t unused_0;
- /* This value indicates the current link speed of the connection. */
+ uint8_t active_fec_signal_mode;
+ /*
+ * This value indicates the current link signaling mode of the
+ * connection.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_MASK \
+ UINT32_C(0xf)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_SFT 0
+ /* NRZ signaling */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_NRZ \
+ UINT32_C(0x0)
+ /* PAM4 signaling */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_PAM4 \
+ UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_PAM4
+ /* This value indicates the current active FEC mode. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_SFT 4
+ /* No active FEC */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_NONE_ACTIVE \
+ (UINT32_C(0x0) << 4)
+ /* FEC CLAUSE 74 (Fire Code) active, autonegotiated or forced. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_CLAUSE74_ACTIVE \
+ (UINT32_C(0x1) << 4)
+ /* FEC CLAUSE 91 RS(528,514) active, autonegoatiated or forced. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_CLAUSE91_ACTIVE \
+ (UINT32_C(0x2) << 4)
+ /* FEC RS544_1XN active, autonegoatiated or forced. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS544_1XN_ACTIVE \
+ (UINT32_C(0x3) << 4)
+ /* FEC RS(544,528) active, autonegoatiated or forced. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS544_IEEE_ACTIVE \
+ (UINT32_C(0x4) << 4)
+ /* FEC RS272_1XN active, autonegotiated or forced. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS272_1XN_ACTIVE \
+ (UINT32_C(0x5) << 4)
+ /* FEC RS(272,257) active, autonegoatiated or forced. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS272_IEEE_ACTIVE \
+ (UINT32_C(0x6) << 4)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS272_IEEE_ACTIVE
+ /*
+ * This value indicates the current link speed of the connection.
+ * The signal_mode field indicates if the link is using
+ * NRZ or PAM4 signaling.
+ */
uint16_t link_speed;
/* 100Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB UINT32_C(0x1)
#define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX UINT32_C(0x2)
/*
* The supported speeds for the port. This is a bit mask.
- * For each speed that is supported, the corrresponding
+ * For each speed that is supported, the corresponding
* bit will be set to '1'.
*/
uint16_t support_speeds;
/* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB \
UINT32_C(0x2000)
- /* 200Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_200GB \
- UINT32_C(0x4000)
/*
* Current setting of forced link speed.
* When the link speed is not being forced, this
/* 100Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB \
UINT32_C(0x3e8)
- /* 200Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_200GB \
- UINT32_C(0x7d0)
/* 10Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB \
UINT32_C(0xffff)
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
/* 100Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
- /* 200Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_200GB UINT32_C(0x7d0)
/* 10Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB \
UINT32_C(0xffff)
/* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB \
UINT32_C(0x2000)
- /* 200Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_200GB \
- UINT32_C(0x4000)
/* Current setting for wirespeed. */
uint8_t wirespeed;
/* Wirespeed feature is disabled. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \
UINT32_C(0x10)
/*
- * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported on this port.
- * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not supported on this port.
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon RS(528,514) for
+ * NRZ) is supported on this port.
+ * When set to 0, then FEC RS(528,418) is not supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \
UINT32_C(0x20)
/*
- * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled on this
- * port. This means that FEC CLAUSE 91 is either advertised if
- * FEC autonegotiation is enabled or FEC CLAUSE 91 is force enabled.
- * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is disabled if supported.
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon RS(528,514) for
+ * NRZ) is enabled on this port. This means that FEC RS(528,514) is
+ * either advertised if FEC autonegotiation is enabled or FEC
+ * RS(528,514) is force enabled. When set to 0, then FEC RS(528,514)
+ * is disabled if supported.
* This flag should be ignored if FEC CLAUSE 91 is not supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_1XN_ENABLED \
UINT32_C(0x100)
/*
- * When set to 1, then FEC RS544_2XN is supported on this port.
- * When set to 0, then FEC RS544_2XN is not supported on this port.
+ * When set to 1, then FEC RS(544,514) is supported on this port.
+ * When set to 0, then FEC RS(544,514) is not supported on this port.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_2XN_SUPPORTED \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_IEEE_SUPPORTED \
UINT32_C(0x200)
/*
- * When set to 1, then RS544_2XN is enabled on this
- * port. This means that FEC RS544_2XN is either advertised if
- * FEC autonegotiation is enabled or FEC RS544_2XN is force enabled.
- * When set to 0, then FEC RS544_2XN is disabled if supported.
- * This flag should be ignored if FEC RS544_2XN is not supported on this port.
+ * When set to 1, then RS(544,514) is enabled on this
+ * port. This means that FEC RS(544,514) is either advertised if
+ * FEC autonegotiation is enabled or FEC RS(544,514) is force
+ * enabled. When set to 0, then FEC RS(544,514) is disabled if supported.
+ * This flag should be ignored if FEC RS(544,514) is not supported on this port.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_2XN_ENABLED \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_IEEE_ENABLED \
UINT32_C(0x400)
/*
- * When set to 1, then FEC CLAUSE 74 (Fire Code) is active on this
- * port, either successfully autonegoatiated or forced.
- * When set to 0, then FEC CLAUSE 74 (Fire Code) is not active.
- * This flag is only valid when link is up on this port.
- * At most only one active FEC flags (fec_clause74_active,
- * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set.
+ * When set to 1, then FEC RS272_1XN is supported on this port.
+ * When set to 0, then FEC RS272_1XN is not supported on this port.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ACTIVE \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS272_1XN_SUPPORTED \
UINT32_C(0x800)
/*
- * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is active on this
- * port, either successfully autonegoatiated or forced.
- * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not active.
- * This flag is only valid when link is up on this port.
- * At most only one active FEC flags (fec_clause74_active,
- * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set.
+ * When set to 1, then RS272_1XN is enabled on this
+ * port. This means that FEC RS272_1XN is either advertised if
+ * FEC autonegotiation is enabled or FEC RS272_1XN is force
+ * enabled. When set to 0, then FEC RS272_1XN is disabled if supported.
+ * This flag should be ignored if FEC RS272_1XN is not supported on this port.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ACTIVE \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS272_1XN_ENABLED \
UINT32_C(0x1000)
/*
- * When set to 1, then FEC RS544_1XN is active on this
- * port, either successfully autonegoatiated or forced.
- * When set to 0, then FEC RS544_1XN is not active.
- * This flag is only valid when link is up on this port.
- * At most only one active FEC flags (fec_clause74_active,
- * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set.
+ * When set to 1, then FEC RS(272,514) is supported on this port.
+ * When set to 0, then FEC RS(272,514) is not supported on this port.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_1XN_ACTIVE \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS272_IEEE_SUPPORTED \
UINT32_C(0x2000)
/*
- * When set to 1, then FEC RS544_2XN is active on this
- * port, either successfully autonegoatiated or forced.
- * When set to 0, then FEC RS544_2XN is not active.
- * This flag is only valid when link is up on this port.
- * At most only one active FEC flags (fec_clause74_active,
- * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set.
+ * When set to 1, then RS(272,257) is enabled on this
+ * port. This means that FEC RS(272,257) is either advertised if
+ * FEC autonegotiation is enabled or FEC RS(272,257) is force
+ * enabled. When set to 0, then FEC RS(272,257) is disabled if supported.
+ * This flag should be ignored if FEC RS(272,257) is not supported on this port.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_2XN_ACTIVE \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS272_IEEE_ENABLED \
UINT32_C(0x4000)
/*
* This value is indicates the duplex of the current
/* When this bit is '1', Media auto detect is enabled. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_OPTION_FLAGS_MEDIA_AUTO_DETECT \
UINT32_C(0x1)
+ /*
+ * When this bit is '1', active_fec_signal_mode can be
+ * trusted.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_OPTION_FLAGS_SIGNAL_MODE_KNOWN \
+ UINT32_C(0x2)
/*
* Up to 16 bytes of null padded ASCII string representing
* PHY vendor.
* part number is not available.
*/
char phy_vendor_partnumber[16];
- uint8_t unused_2[7];
+ /*
+ * The supported PAM4 speeds for the port. This is a bit mask.
+ * For each speed that is supported, the corresponding
+ * bit will be set to '1'.
+ */
+ uint16_t support_pam4_speeds;
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_PAM4_SPEEDS_50G \
+ UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_PAM4_SPEEDS_100G \
+ UINT32_C(0x2)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_PAM4_SPEEDS_200G \
+ UINT32_C(0x4)
+ /*
+ * Current setting of forced PAM4 link speed.
+ * When the link speed is not being forced, this
+ * value shall be set to 0.
+ */
+ uint16_t force_pam4_link_speed;
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAM4_LINK_SPEED_50GB \
+ UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAM4_LINK_SPEED_100GB \
+ UINT32_C(0x3e8)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAM4_LINK_SPEED_200GB \
+ UINT32_C(0x7d0)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAM4_LINK_SPEED_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAM4_LINK_SPEED_200GB
+ /*
+ * Current setting for auto_pam4_link_speed_mask that is used to
+ * advertise speeds during autonegotiation.
+ * This field is only valid when auto_mode is set to "mask".
+ * The speeds specified in this field shall be a subset of
+ * supported speeds on this port.
+ */
+ uint16_t auto_pam4_link_speed_mask;
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAM4_LINK_SPEED_MASK_50G \
+ UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAM4_LINK_SPEED_MASK_100G \
+ UINT32_C(0x2)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAM4_LINK_SPEED_MASK_200G \
+ UINT32_C(0x4)
+ /*
+ * The advertised PAM4 speeds for the port by the link partner.
+ * Each advertised speed will be set to '1'.
+ */
+ uint8_t link_partner_pam4_adv_speeds;
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_PAM4_ADV_SPEEDS_50GB \
+ UINT32_C(0x1)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_PAM4_ADV_SPEEDS_100GB \
+ UINT32_C(0x2)
+ /* 200Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_PAM4_ADV_SPEEDS_200GB \
+ UINT32_C(0x4)
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
************************/
-/* hwrm_port_ecn_qstats_input (size:192b/24B) */
+/* hwrm_port_ecn_qstats_input (size:256b/32B) */
struct hwrm_port_ecn_qstats_input {
/* The HWRM command request type. */
uint16_t req_type;
* multi-host mode.
*/
uint16_t port_id;
- uint8_t unused_0[6];
+ /*
+ * Size of the DMA buffer the caller has allocated for the firmware to
+ * write into.
+ */
+ uint16_t ecn_stat_buf_size;
+ uint8_t flags;
+ /* This value is not used to avoid backward compatibility issues. */
+ #define HWRM_PORT_ECN_QSTATS_INPUT_FLAGS_UNUSED UINT32_C(0x0)
+ /*
+ * This bit is set to 1 when request is for a counter mask,
+ * representing the width of each of the stats counters, rather
+ * than counters themselves.
+ */
+ #define HWRM_PORT_ECN_QSTATS_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1)
+ #define HWRM_PORT_ECN_QSTATS_INPUT_FLAGS_LAST \
+ HWRM_PORT_ECN_QSTATS_INPUT_FLAGS_COUNTER_MASK
+ uint8_t unused_0[3];
+ /*
+ * This is the host address where
+ * ECN port statistics will be stored
+ */
+ uint64_t ecn_stat_host_addr;
} __rte_packed;
-/* hwrm_port_ecn_qstats_output (size:384b/48B) */
+/* hwrm_port_ecn_qstats_output (size:128b/16B) */
struct hwrm_port_ecn_qstats_output {
/* The specific error status for the command. */
uint16_t error_code;
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Number of packets marked in CoS queue 0. */
- uint32_t mark_cnt_cos0;
- /* Number of packets marked in CoS queue 1. */
- uint32_t mark_cnt_cos1;
- /* Number of packets marked in CoS queue 2. */
- uint32_t mark_cnt_cos2;
- /* Number of packets marked in CoS queue 3. */
- uint32_t mark_cnt_cos3;
- /* Number of packets marked in CoS queue 4. */
- uint32_t mark_cnt_cos4;
- /* Number of packets marked in CoS queue 5. */
- uint32_t mark_cnt_cos5;
- /* Number of packets marked in CoS queue 6. */
- uint32_t mark_cnt_cos6;
- /* Number of packets marked in CoS queue 7. */
- uint32_t mark_cnt_cos7;
+ /* Number of bytes of stats the firmware wrote to the DMA buffer. */
+ uint16_t ecn_stat_buf_size;
/*
* Bitmask that indicates which CoS queues have ECN marking enabled.
* Bit i corresponds to CoS queue i.
*/
uint8_t mark_en;
- uint8_t unused_0[6];
+ uint8_t unused_0[4];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
uint8_t valid;
} __rte_packed;
+/* ECN mark statistics format */
+/* port_stats_ecn (size:512b/64B) */
+struct port_stats_ecn {
+ /*
+ * Number of packets marked in CoS queue 0.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos0;
+ /*
+ * Number of packets marked in CoS queue 1.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos1;
+ /*
+ * Number of packets marked in CoS queue 2.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos2;
+ /*
+ * Number of packets marked in CoS queue 3.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos3;
+ /*
+ * Number of packets marked in CoS queue 4.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos4;
+ /*
+ * Number of packets marked in CoS queue 5.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos5;
+ /*
+ * Number of packets marked in CoS queue 6.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos6;
+ /*
+ * Number of packets marked in CoS queue 7.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos7;
+} __rte_packed;
+
/***********************
* hwrm_port_clr_stats *
***********************/
uint8_t unused_0[6];
} __rte_packed;
-/* hwrm_port_phy_qcaps_output (size:192b/24B) */
+/* hwrm_port_phy_qcaps_output (size:256b/32B) */
struct hwrm_port_phy_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
#define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_CUMULATIVE_COUNTERS_ON_RESET \
UINT32_C(0x10)
/*
- * Reserved field. The HWRM shall set this field to 0.
- * An HWRM client shall ignore this field.
+ * If set to 1, then this field indicates that the
+ * local loopback is not supported on this controller.
*/
- #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_MASK \
- UINT32_C(0xe0)
- #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT \
- 5
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_LOCAL_LPBK_NOT_SUPPORTED \
+ UINT32_C(0x20)
+ /*
+ * If set to 1, then this field indicates that the
+ * PHY/Link down policy during PF shutdown is totally
+ * controlled by the firmware. It can shutdown the link
+ * even when there are active VFs associated with the PF.
+ * Host PF driver can send HWRM_PHY_CFG command to bring
+ * down the PHY even when the port is shared between VFs
+ * and PFs.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_FW_MANAGED_LINK_DOWN \
+ UINT32_C(0x40)
+ /*
+ * If set to 1, this field indicates that the FCS may
+ * be disabled for a given packet via the transmit
+ * buffer descriptor.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_NO_FCS \
+ UINT32_C(0x80)
/* Number of front panel ports for this device. */
uint8_t port_cnt;
/* Not supported or unknown */
/* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MB \
UINT32_C(0x2000)
- /* 200Gb link speed */
- #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_200GB \
- UINT32_C(0x4000)
/*
* This is a bit mask to indicate what speeds are supported
* for autonegotiation on this link.
/* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MB \
UINT32_C(0x2000)
- /* 200Gb link speed */
- #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_200GB \
- UINT32_C(0x4000)
/*
* This is a bit mask to indicate what speeds are supported
* for EEE on this link.
#define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_MASK \
UINT32_C(0xffffff)
#define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_SFT 0
+ /*
+ * Reserved field. The HWRM shall set this field to 0.
+ * An HWRM client shall ignore this field.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD_SFT 24
+ /*
+ * This field is used to advertise which PAM4 speeds are supported
+ * in auto mode.
+ */
+ uint16_t supported_pam4_speeds_auto_mode;
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_PAM4_SPEEDS_AUTO_MODE_50G \
+ UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_PAM4_SPEEDS_AUTO_MODE_100G \
+ UINT32_C(0x2)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_PAM4_SPEEDS_AUTO_MODE_200G \
+ UINT32_C(0x4)
+ /*
+ * This field is used to advertise which PAM4 speeds are supported
+ * in forced mode.
+ */
+ uint16_t supported_pam4_speeds_force_mode;
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_PAM4_SPEEDS_FORCE_MODE_50G \
+ UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_PAM4_SPEEDS_FORCE_MODE_100G \
+ UINT32_C(0x2)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_PAM4_SPEEDS_FORCE_MODE_200G \
+ UINT32_C(0x4)
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
- #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_MASK \
- UINT32_C(0xff000000)
- #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT 24
+ uint8_t valid;
} __rte_packed;
/****************************
uint8_t valid;
} __rte_packed;
+/************************
+ * hwrm_port_tx_fir_cfg *
+ ************************/
+
+
+/* hwrm_port_tx_fir_cfg_input (size:320b/40B) */
+struct hwrm_port_tx_fir_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Modulation types of TX FIR: NRZ, PAM4. */
+ uint8_t mod_type;
+ /* For NRZ */
+ #define HWRM_PORT_TX_FIR_CFG_INPUT_MOD_TYPE_NRZ UINT32_C(0x0)
+ /* For PAM4 */
+ #define HWRM_PORT_TX_FIR_CFG_INPUT_MOD_TYPE_PAM4 UINT32_C(0x1)
+ #define HWRM_PORT_TX_FIR_CFG_INPUT_MOD_TYPE_LAST \
+ HWRM_PORT_TX_FIR_CFG_INPUT_MOD_TYPE_PAM4
+ /* The lane mask of the lane TX FIR will be configured. */
+ uint8_t lane_mask;
+ uint8_t unused_0[2];
+ /* Value1 of TX FIR, required for NRZ or PAM4. */
+ uint32_t txfir_val_1;
+ /* Value2 of TX FIR, required for NRZ or PAM4. */
+ uint32_t txfir_val_2;
+ /* Value3 of TX FIR, required for PAM4. */
+ uint32_t txfir_val_3;
+ /* Value4 of TX FIR, required for PAM4. */
+ uint32_t txfir_val_4;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_port_tx_fir_cfg_output (size:128b/16B) */
+struct hwrm_port_tx_fir_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_port_tx_fir_qcfg *
+ *************************/
+
+
+/* hwrm_port_tx_fir_qcfg_input (size:192b/24B) */
+struct hwrm_port_tx_fir_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Modulation types of TX FIR: NRZ, PAM4. */
+ uint8_t mod_type;
+ /* For NRZ */
+ #define HWRM_PORT_TX_FIR_QCFG_INPUT_MOD_TYPE_NRZ UINT32_C(0x0)
+ /* For PAM4 */
+ #define HWRM_PORT_TX_FIR_QCFG_INPUT_MOD_TYPE_PAM4 UINT32_C(0x1)
+ #define HWRM_PORT_TX_FIR_QCFG_INPUT_MOD_TYPE_LAST \
+ HWRM_PORT_TX_FIR_QCFG_INPUT_MOD_TYPE_PAM4
+ /* The ID of the lane TX FIR will be queried. */
+ uint8_t lane_id;
+ uint8_t unused[6];
+} __rte_packed;
+
+/* hwrm_port_tx_fir_qcfg_output (size:256b/32B) */
+struct hwrm_port_tx_fir_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Value1 of TX FIR, required for NRZ or PAM4. */
+ uint32_t txfir_val_1;
+ /* Value2 of TX FIR, required for NRZ or PAM4. */
+ uint32_t txfir_val_2;
+ /* Value3 of TX FIR, required for PAM4. */
+ uint32_t txfir_val_3;
+ /* Value4 of TX FIR, required for PAM4. */
+ uint32_t txfir_val_4;
+ uint8_t unused[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
/***********************
* hwrm_queue_qportcfg *
***********************/
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
uint8_t queue_id0;
- /* This value is applicable to CoS queues only. */
+ /* This value specifies service profile kind for CoS queue */
uint8_t queue_id0_service_profile;
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
- /* Lossless (legacy) */
+ /* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
- /* Lossless RoCE */
+ /* Lossless RoCE (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_ROCE \
UINT32_C(0x1)
- /* Lossy RoCE CNP */
+ /* Lossy RoCE CNP (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY_ROCE_CNP \
UINT32_C(0x2)
- /* Lossless NIC */
+ /* Lossless NIC (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_NIC \
UINT32_C(0x3)
/* Set to 0xFF... (All Fs) if there is no service profile specified */
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
uint8_t queue_id1;
- /* This value is applicable to CoS queues only. */
+ /* This value specifies service profile kind for CoS queue */
uint8_t queue_id1_service_profile;
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
- /* Lossless (legacy) */
+ /* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
- /* Lossless RoCE */
+ /* Lossless RoCE (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_ROCE \
UINT32_C(0x1)
- /* Lossy RoCE CNP */
+ /* Lossy RoCE CNP (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY_ROCE_CNP \
UINT32_C(0x2)
- /* Lossless NIC */
+ /* Lossless NIC (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_NIC \
UINT32_C(0x3)
/* Set to 0xFF... (All Fs) if there is no service profile specified */
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
uint8_t queue_id2;
- /* This value is applicable to CoS queues only. */
+ /* This value specifies service profile kind for CoS queue */
uint8_t queue_id2_service_profile;
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
- /* Lossless (legacy) */
+ /* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
- /* Lossless RoCE */
+ /* Lossless RoCE (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_ROCE \
UINT32_C(0x1)
- /* Lossy RoCE CNP */
+ /* Lossy RoCE CNP (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY_ROCE_CNP \
UINT32_C(0x2)
- /* Lossless NIC */
+ /* Lossless NIC (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_NIC \
UINT32_C(0x3)
/* Set to 0xFF... (All Fs) if there is no service profile specified */
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
uint8_t queue_id3;
- /* This value is applicable to CoS queues only. */
+ /* This value specifies service profile kind for CoS queue */
uint8_t queue_id3_service_profile;
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
- /* Lossless (legacy) */
+ /* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
- /* Lossless RoCE */
+ /* Lossless RoCE (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_ROCE \
UINT32_C(0x1)
- /* Lossy RoCE CNP */
+ /* Lossy RoCE CNP (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY_ROCE_CNP \
UINT32_C(0x2)
- /* Lossless NIC */
+ /* Lossless NIC (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_NIC \
UINT32_C(0x3)
/* Set to 0xFF... (All Fs) if there is no service profile specified */
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
uint8_t queue_id4;
- /* This value is applicable to CoS queues only. */
+ /* This value specifies service profile kind for CoS queue */
uint8_t queue_id4_service_profile;
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
- /* Lossless (legacy) */
+ /* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
- /* Lossless RoCE */
+ /* Lossless RoCE (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_ROCE \
UINT32_C(0x1)
- /* Lossy RoCE CNP */
+ /* Lossy RoCE CNP (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY_ROCE_CNP \
UINT32_C(0x2)
- /* Lossless NIC */
+ /* Lossless NIC (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_NIC \
UINT32_C(0x3)
/* Set to 0xFF... (All Fs) if there is no service profile specified */
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
uint8_t queue_id5;
- /* This value is applicable to CoS queues only. */
+ /* This value specifies service profile kind for CoS queue */
uint8_t queue_id5_service_profile;
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
- /* Lossless (legacy) */
+ /* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
- /* Lossless RoCE */
+ /* Lossless RoCE (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_ROCE \
UINT32_C(0x1)
- /* Lossy RoCE CNP */
+ /* Lossy RoCE CNP (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY_ROCE_CNP \
UINT32_C(0x2)
- /* Lossless NIC */
+ /* Lossless NIC (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_NIC \
UINT32_C(0x3)
/* Set to 0xFF... (All Fs) if there is no service profile specified */
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
uint8_t queue_id6;
- /* This value is applicable to CoS queues only. */
+ /* This value specifies service profile kind for CoS queue */
uint8_t queue_id6_service_profile;
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
- /* Lossless (legacy) */
+ /* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
- /* Lossless RoCE */
+ /* Lossless RoCE (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_ROCE \
UINT32_C(0x1)
- /* Lossy RoCE CNP */
+ /* Lossy RoCE CNP (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY_ROCE_CNP \
UINT32_C(0x2)
- /* Lossless NIC */
+ /* Lossless NIC (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_NIC \
UINT32_C(0x3)
/* Set to 0xFF... (All Fs) if there is no service profile specified */
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
uint8_t queue_id7;
- /* This value is applicable to CoS queues only. */
+ /* This value specifies service profile kind for CoS queue */
uint8_t queue_id7_service_profile;
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
- /* Lossless (legacy) */
+ /* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
- /* Lossless RoCE */
+ /* Lossless RoCE (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_ROCE \
UINT32_C(0x1)
- /* Lossy RoCE CNP */
+ /* Lossy RoCE CNP (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY_ROCE_CNP \
UINT32_C(0x2)
- /* Lossless NIC */
+ /* Lossless NIC (deprecated) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_NIC \
UINT32_C(0x3)
/* Set to 0xFF... (All Fs) if there is no service profile specified */
UINT32_C(0xff)
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LAST \
HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN
- uint8_t unused_0;
+ /*
+ * This value specifies traffic type for the service profile. We can
+ * have a TC mapped to multiple traffic types. For example shared
+ * CoS Q for CNP and NIC will have both cnp and nic bits set (0x6).
+ * A value of zero is considered as invalid.
+ */
+ uint8_t queue_id0_service_profile_type;
+ /* Recommended to be used for RoCE traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_TYPE_ROCE \
+ UINT32_C(0x1)
+ /* Recommended to be used for NIC/L2 traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_TYPE_NIC \
+ UINT32_C(0x2)
+ /* Recommended to be used for CNP traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_TYPE_CNP \
+ UINT32_C(0x4)
/*
* Up to 16 bytes of null padded ASCII string describing this queue.
* The queue name includes a CoS queue index and, in some cases, text
char qid6_name[16];
/* Up to 16 bytes of null padded ASCII string describing this queue. */
char qid7_name[16];
- uint8_t unused_1[7];
+ /*
+ * This value specifies traffic type for the service profile. We can
+ * have a TC mapped to multiple traffic types. For example shared
+ * CoS Q for CNP and NIC will have both cnp and nic bits set (0x6).
+ * A value of zero is considered as invalid.
+ */
+ uint8_t queue_id1_service_profile_type;
+ /* Recommended to be used for RoCE traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_TYPE_ROCE \
+ UINT32_C(0x1)
+ /* Recommended to be used for NIC/L2 traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_TYPE_NIC \
+ UINT32_C(0x2)
+ /* Recommended to be used for CNP traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_TYPE_CNP \
+ UINT32_C(0x4)
+ /*
+ * This value specifies traffic type for the service profile. We can
+ * have a TC mapped to multiple traffic types. For example shared
+ * CoS Q for CNP and NIC will have both cnp and nic bits set (0x6).
+ * A value of zero is considered as invalid.
+ */
+ uint8_t queue_id2_service_profile_type;
+ /* Recommended to be used for RoCE traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_TYPE_ROCE \
+ UINT32_C(0x1)
+ /* Recommended to be used for NIC/L2 traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_TYPE_NIC \
+ UINT32_C(0x2)
+ /* Recommended to be used for CNP traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_TYPE_CNP \
+ UINT32_C(0x4)
+ /*
+ * This value specifies traffic type for the service profile. We can
+ * have a TC mapped to multiple traffic types. For example shared
+ * CoS Q for CNP and NIC will have both cnp and nic bits set (0x6).
+ * A value of zero is considered as invalid.
+ */
+ uint8_t queue_id3_service_profile_type;
+ /* Recommended to be used for RoCE traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_TYPE_ROCE \
+ UINT32_C(0x1)
+ /* Recommended to be used for NIC/L2 traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_TYPE_NIC \
+ UINT32_C(0x2)
+ /* Recommended to be used for CNP traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_TYPE_CNP \
+ UINT32_C(0x4)
+ /*
+ * This value specifies traffic type for the service profile. We can
+ * have a TC mapped to multiple traffic types. For example shared
+ * CoS Q for CNP and NIC will have both cnp and nic bits set (0x6).
+ * A value of zero is considered as invalid.
+ */
+ uint8_t queue_id4_service_profile_type;
+ /* Recommended to be used for RoCE traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_TYPE_ROCE \
+ UINT32_C(0x1)
+ /* Recommended to be used for NIC/L2 traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_TYPE_NIC \
+ UINT32_C(0x2)
+ /* Recommended to be used for CNP traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_TYPE_CNP \
+ UINT32_C(0x4)
+ /*
+ * This value specifies traffic type for the service profile. We can
+ * have a TC mapped to multiple traffic types. For example shared
+ * CoS Q for CNP and NIC will have both cnp and nic bits set (0x6).
+ * A value of zero is considered as invalid.
+ */
+ uint8_t queue_id5_service_profile_type;
+ /* Recommended to be used for RoCE traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_TYPE_ROCE \
+ UINT32_C(0x1)
+ /* Recommended to be used for NIC/L2 traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_TYPE_NIC \
+ UINT32_C(0x2)
+ /* Recommended to be used for CNP traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_TYPE_CNP \
+ UINT32_C(0x4)
+ /*
+ * This value specifies traffic type for the service profile. We can
+ * have a TC mapped to multiple traffic types. For example shared
+ * CoS Q for CNP and NIC will have both cnp and nic bits set (0x6).
+ * A value of zero is considered as invalid.
+ */
+ uint8_t queue_id6_service_profile_type;
+ /* Recommended to be used for RoCE traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_TYPE_ROCE \
+ UINT32_C(0x1)
+ /* Recommended to be used for NIC/L2 traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_TYPE_NIC \
+ UINT32_C(0x2)
+ /* Recommended to be used for CNP traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_TYPE_CNP \
+ UINT32_C(0x4)
+ /*
+ * This value specifies traffic type for the service profile. We can
+ * have a TC mapped to multiple traffic types. For example shared
+ * CoS Q for CNP and NIC will have both cnp and nic bits set (0x6).
+ * A value of zero is considered as invalid.
+ */
+ uint8_t queue_id7_service_profile_type;
+ /* Recommended to be used for RoCE traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_TYPE_ROCE \
+ UINT32_C(0x1)
+ /* Recommended to be used for NIC/L2 traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_TYPE_NIC \
+ UINT32_C(0x2)
+ /* Recommended to be used for CNP traffic only. */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_TYPE_CNP \
+ UINT32_C(0x4)
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
uint8_t valid;
} __rte_packed;
-/*******************
- * hwrm_vnic_alloc *
- *******************/
+/****************************
+ * hwrm_queue_vlanpri_qcaps *
+ ****************************/
-/* hwrm_vnic_alloc_input (size:192b/24B) */
-struct hwrm_vnic_alloc_input {
+/* hwrm_queue_vlanpri_qcaps_input (size:192b/24B) */
+struct hwrm_queue_vlanpri_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
/*
- * When this bit is '1', this VNIC is requested to
- * be the default VNIC for this function.
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure VLAN priority to user priority mapping on this port.
*/
- #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
- uint8_t unused_0[4];
+ uint8_t port_id;
+ uint8_t unused_0[7];
} __rte_packed;
-/* hwrm_vnic_alloc_output (size:128b/16B) */
-struct hwrm_vnic_alloc_output {
+/* hwrm_queue_vlanpri_qcaps_output (size:128b/16B) */
+struct hwrm_queue_vlanpri_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Logical vnic ID */
- uint32_t vnic_id;
+ /*
+ * This is the default user priority which all VLAN priority values
+ * are mapped to if there is no VLAN priority to user priority mapping.
+ */
+ uint8_t hw_default_pri;
+ uint8_t unused_0[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************************
+ * hwrm_queue_vlanpri2pri_qcfg *
+ *******************************/
+
+
+/* hwrm_queue_vlanpri2pri_qcfg_input (size:192b/24B) */
+struct hwrm_queue_vlanpri2pri_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure VLAN priority to user priority mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_vlanpri2pri_qcfg_output (size:192b/24B) */
+struct hwrm_queue_vlanpri2pri_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * User priority assigned to VLAN priority 0. A value of 0xff
+ * indicates that no user priority is assigned. The default user
+ * priority will be used.
+ */
+ uint8_t vlanpri0_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 1. A value of 0xff
+ * indicates that no user priority is assigned. The default user
+ * priority will be used.
+ */
+ uint8_t vlanpri1_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 2. A value of 0xff
+ * indicates that no user priority is assigned. The default user
+ * priority will be used.
+ */
+ uint8_t vlanpri2_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 3. A value of 0xff
+ * indicates that no user priority is assigned. The default user
+ * priority will be used.
+ */
+ uint8_t vlanpri3_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 4. A value of 0xff
+ * indicates that no user priority is assigned. The default user
+ * priority will be used.
+ */
+ uint8_t vlanpri4_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 5. A value of 0xff
+ * indicates that no user priority is assigned. The default user
+ * priority will be used.
+ */
+ uint8_t vlanpri5_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 6. A value of 0xff
+ * indicates that no user priority is assigned. The default user
+ * priority will be used.
+ */
+ uint8_t vlanpri6_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 7. A value of 0xff
+ * indicates that no user priority is assigned. The default user
+ * priority will be used.
+ */
+ uint8_t vlanpri7_user_pri_id;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************************
+ * hwrm_queue_vlanpri2pri_cfg *
+ ******************************/
+
+
+/* hwrm_queue_vlanpri2pri_cfg_input (size:256b/32B) */
+struct hwrm_queue_vlanpri2pri_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the vlanpri0_user_pri_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_VLANPRI2PRI_CFG_INPUT_ENABLES_VLANPRI0_USER_PRI_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the vlanpri1_user_pri_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_VLANPRI2PRI_CFG_INPUT_ENABLES_VLANPRI1_USER_PRI_ID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the vlanpri2_user_pri_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_VLANPRI2PRI_CFG_INPUT_ENABLES_VLANPRI2_USER_PRI_ID \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the vlanpri3_user_pri_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_VLANPRI2PRI_CFG_INPUT_ENABLES_VLANPRI3_USER_PRI_ID \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the vlanpri4_user_pri_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_VLANPRI2PRI_CFG_INPUT_ENABLES_VLANPRI4_USER_PRI_ID \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the vlanpri5_user_pri_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_VLANPRI2PRI_CFG_INPUT_ENABLES_VLANPRI5_USER_PRI_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the vlanpri6_user_pri_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_VLANPRI2PRI_CFG_INPUT_ENABLES_VLANPRI6_USER_PRI_ID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the vlanpri7_user_pri_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_VLANPRI2PRI_CFG_INPUT_ENABLES_VLANPRI7_USER_PRI_ID \
+ UINT32_C(0x80)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure VLAN priority to user priority mapping on this port.
+ */
+ uint8_t port_id;
uint8_t unused_0[3];
+ /*
+ * User priority assigned to VLAN priority 0. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t vlanpri0_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 1. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t vlanpri1_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 2. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t vlanpri2_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 3. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t vlanpri3_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 4. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t vlanpri4_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 5. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t vlanpri5_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 6. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t vlanpri6_user_pri_id;
+ /*
+ * User priority assigned to VLAN priority 7. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t vlanpri7_user_pri_id;
+} __rte_packed;
+
+/* hwrm_queue_vlanpri2pri_cfg_output (size:128b/16B) */
+struct hwrm_queue_vlanpri2pri_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
uint8_t valid;
} __rte_packed;
-/******************
- * hwrm_vnic_free *
- ******************/
+/*******************
+ * hwrm_vnic_alloc *
+ *******************/
-/* hwrm_vnic_free_input (size:192b/24B) */
-struct hwrm_vnic_free_input {
+/* hwrm_vnic_alloc_input (size:192b/24B) */
+struct hwrm_vnic_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', this VNIC is requested to
+ * be the default VNIC for this function.
+ */
+ #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', proxy VEE PF is requesting
+ * allocation of a default VNIC on behalf of virtio-net
+ * function given in virtio_net_fid field.
+ */
+ #define HWRM_VNIC_ALLOC_INPUT_FLAGS_VIRTIO_NET_FID_VALID \
+ UINT32_C(0x2)
+ /*
+ * Virtio-net function's FID.
+ * This virtio-net function is requesting allocation of default
+ * VNIC through proxy VEE PF.
+ */
+ uint16_t virtio_net_fid;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_vnic_alloc_output (size:128b/16B) */
+struct hwrm_vnic_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/********************
+ * hwrm_vnic_update *
+ ********************/
+
+
+/* hwrm_vnic_update_input (size:256b/32B) */
+struct hwrm_vnic_update_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the vnic_state field to be
+ * configured.
+ */
+ #define HWRM_VNIC_UPDATE_INPUT_ENABLES_VNIC_STATE_VALID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the mru field to be
+ * configured.
+ */
+ #define HWRM_VNIC_UPDATE_INPUT_ENABLES_MRU_VALID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the metadata_format_type field to be
+ * configured.
+ */
+ #define HWRM_VNIC_UPDATE_INPUT_ENABLES_METADATA_FORMAT_TYPE_VALID \
+ UINT32_C(0x4)
+ /*
+ * This will update the context variable with the same name if
+ * the corresponding enable is set.
+ */
+ uint8_t vnic_state;
+ /* Normal operation state for the VNIC. */
+ #define HWRM_VNIC_UPDATE_INPUT_VNIC_STATE_NORMAL UINT32_C(0x0)
+ /* All packets are dropped in this state. */
+ #define HWRM_VNIC_UPDATE_INPUT_VNIC_STATE_DROP UINT32_C(0x1)
+ #define HWRM_VNIC_UPDATE_INPUT_VNIC_STATE_LAST \
+ HWRM_VNIC_UPDATE_INPUT_VNIC_STATE_DROP
+ /*
+ * The metadata format type used in all the RX packet completions
+ * going through this VNIC.
+ */
+ uint8_t metadata_format_type;
+ /* No metadata information. */
+ #define HWRM_VNIC_UPDATE_INPUT_METADATA_FORMAT_TYPE_NONE \
+ UINT32_C(0x0)
+ /*
+ * Action record pointer (table_scope[4:0], act_rec_ptr[25:0],
+ * vtag[19:0]).
+ */
+ #define HWRM_VNIC_UPDATE_INPUT_METADATA_FORMAT_TYPE_ACT_RECORD_PTR \
+ UINT32_C(0x1)
+ /* Tunnel ID (tunnel_id[31:0], vtag[19:0]) */
+ #define HWRM_VNIC_UPDATE_INPUT_METADATA_FORMAT_TYPE_TUNNEL_ID \
+ UINT32_C(0x2)
+ /* Custom header data (updated_chdr_data[31:0], vtag[19:0]) */
+ #define HWRM_VNIC_UPDATE_INPUT_METADATA_FORMAT_TYPE_CUSTOM_HDR_DATA \
+ UINT32_C(0x3)
+ /* Header offsets (hdr_offsets[31:0], vtag[19:0]) */
+ #define HWRM_VNIC_UPDATE_INPUT_METADATA_FORMAT_TYPE_HDR_OFFSETS \
+ UINT32_C(0x4)
+ #define HWRM_VNIC_UPDATE_INPUT_METADATA_FORMAT_TYPE_LAST \
+ HWRM_VNIC_UPDATE_INPUT_METADATA_FORMAT_TYPE_HDR_OFFSETS
+ /*
+ * The maximum receive unit of the vnic.
+ * Each vnic is associated with a function.
+ * The vnic mru value overwrites the mru setting of the
+ * associated function.
+ * The HWRM shall make sure that vnic mru does not exceed
+ * the mru of the port the function is associated with.
+ */
+ uint16_t mru;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_vnic_update_output (size:128b/16B) */
+struct hwrm_vnic_update_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_vnic_free *
+ ******************/
+
+
+/* hwrm_vnic_free_input (size:192b/24B) */
+struct hwrm_vnic_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* queue ID will be arriving on this VNIC. Packet priority to CoS mapping
* rules can be specified using HWRM_QUEUE_PRI2COS_CFG. In this mode,
* ntuple filters with VNIC destination specified are invalid since they
- * conflict with the the CoS to VNIC steering rules in this mode.
+ * conflict with the CoS to VNIC steering rules in this mode.
*
* If this field is not specified, packet to VNIC steering will be
* subject to the standard L2 filter rules and any additional ntuple
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
UINT32_C(0x40)
+ /*
+ * When this bit is '0', VNIC is in normal operation state.
+ * When this bit is '1', VNIC drops all the received packets.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_OPERATION_STATE \
+ UINT32_C(0x80)
/*
* When returned with a valid CoS Queue id, the CoS Queue/VNIC association
* is valid. Otherwise it will return 0xFFFF to indicate no VNIC/CoS
UINT32_C(0x20)
/*
* When this bit is '1', the capability to
- * mirror the the RoCE traffic is supported.
+ * mirror the RoCE traffic is supported.
* If set to '0', then the capability to mirror the
* RoCE traffic is not supported.
*/
*/
#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RX_CMPL_V2_CAP \
UINT32_C(0x200)
+ /*
+ * When this bit is '1', it indicates that HW and firmware support
+ * vnic state change. Host drivers can change the vnic state using
+ * HWRM_VNIC_UPDATE. If set to '0', the HW and firmware do not
+ * support this feature.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_VNIC_STATE_CAP \
+ UINT32_C(0x400)
+ /*
+ * When this bit is '1', it indicates that firmware supports
+ * virtio-net functions default VNIC allocation using
+ * HWRM_VNIC_ALLOC.
+ * This capability is available only on Proxy VEE PF. If set to '0',
+ * firmware does not support this feature.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_VIRTIO_NET_VNIC_ALLOC_CAP \
+ UINT32_C(0x800)
+ /*
+ * When this bit is set '1', then the capability to configure the
+ * metadata format in the RX completion is supported for the VNIC.
+ * When this bit is set to '0', then the capability to configure
+ * the metadata format in the RX completion is not supported for
+ * the VNIC.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_METADATA_FORMAT_CAP \
+ UINT32_C(0x1000)
/*
* This field advertises the maximum concurrent TPA aggregations
* supported by the VNIC on new devices that support TPA v2.
uint16_t hds_threshold;
/*
* When virtio placement algorithm is enabled, this
- * value is used to determine the the maximum number of BDs
+ * value is used to determine the maximum number of BDs
* that can be used to place an Rx Packet.
* If an incoming packet does not fit in the buffers described
* by the max BDs, the packet will be dropped and an error
uint16_t hds_threshold;
/*
* When virtio placement algorithm is enabled, this
- * value is used to determine the the maximum number of BDs
+ * value is used to determine the maximum number of BDs
* that can be used to place an Rx Packet.
* If an incoming packet does not fit in the buffers described
* by the max BDs, the packet will be dropped and an error
*/
#define HWRM_RING_ALLOC_INPUT_ENABLES_SCHQ_ID \
UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the mpc_chnls_type field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_MPC_CHNLS_TYPE \
+ UINT32_C(0x400)
/* Ring Type. */
uint8_t ring_type;
/* L2 Completion Ring (CR) */
#define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3)
#define HWRM_RING_ALLOC_INPUT_INT_MODE_LAST \
HWRM_RING_ALLOC_INPUT_INT_MODE_POLL
- uint8_t unused_4[3];
+ /* Midpath channel type */
+ uint8_t mpc_chnls_type;
+ /*
+ * Indicate the TX ring alloc MPC channel type is a MPC channel
+ * with destination to the TX crypto engine block.
+ */
+ #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_TCE UINT32_C(0x0)
+ /*
+ * Indicate the RX ring alloc MPC channel type is a MPC channel
+ * with destination to the RX crypto engine block.
+ */
+ #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_RCE UINT32_C(0x1)
+ /*
+ * Indicate the RX ring alloc MPC channel type is a MPC channel
+ * with destination to the TX configurable flow processing block.
+ */
+ #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_TE_CFA UINT32_C(0x2)
+ /*
+ * Indicate the RX ring alloc MPC channel type is a MPC channel
+ * with destination to the RX configurable flow processing block.
+ */
+ #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_RE_CFA UINT32_C(0x3)
+ /*
+ * Indicate the RX ring alloc MPC channel type is a MPC channel
+ * with destination to the primate processor block.
+ */
+ #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_PRIMATE UINT32_C(0x4)
+ #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_LAST \
+ HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_PRIMATE
+ uint8_t unused_4[2];
/*
* The cq_handle is specified when allocating a completion ring. For
* devices that support NQs, this cq_handle will be included in the
uint16_t ring_id;
/* Logical number of ring allocated. */
uint16_t logical_ring_id;
- uint8_t unused_0[3];
+ /*
+ * This field will tell whether to use ping or pong buffer
+ * for first push operation.
+ */
+ uint8_t push_buffer_index;
+ /* Start push from ping buffer index */
+ #define HWRM_RING_ALLOC_OUTPUT_PUSH_BUFFER_INDEX_PING_BUFFER \
+ UINT32_C(0x0)
+ /* Start push from pong buffer index */
+ #define HWRM_RING_ALLOC_OUTPUT_PUSH_BUFFER_INDEX_PONG_BUFFER \
+ UINT32_C(0x1)
+ #define HWRM_RING_ALLOC_OUTPUT_PUSH_BUFFER_INDEX_LAST \
+ HWRM_RING_ALLOC_OUTPUT_PUSH_BUFFER_INDEX_PONG_BUFFER
+ uint8_t unused_0[2];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
******************/
-/* hwrm_ring_free_input (size:192b/24B) */
+/* hwrm_ring_free_input (size:256b/32B) */
struct hwrm_ring_free_input {
/* The HWRM command request type. */
uint16_t req_type;
#define HWRM_RING_FREE_INPUT_RING_TYPE_NQ UINT32_C(0x5)
#define HWRM_RING_FREE_INPUT_RING_TYPE_LAST \
HWRM_RING_FREE_INPUT_RING_TYPE_NQ
- uint8_t unused_0;
+ uint8_t flags;
+ /*
+ * If this bit is set to '1', ring_id in this command belongs to
+ * virtio function. prod_idx in this command corresponds to doorbell
+ * producer index. opaque field in this command needs to be inserted
+ * by firmware in VEE_FLUSH completion record.
+ * Firmware will poll the corresponding ring context to reach the
+ * given producer index before sending successful response. It will
+ * finish the completion using VEE_FLUSH completion record.
+ *
+ * If this bit is '0', firmware will not treat ring_id as virtio
+ * ring and ignore prod_idx, opaque fields.
+ *
+ * This feature is not applicable for L2 or RoCE.
+ */
+ #define HWRM_RING_FREE_INPUT_FLAGS_VIRTIO_RING_VALID UINT32_C(0x1)
+ #define HWRM_RING_FREE_INPUT_FLAGS_LAST \
+ HWRM_RING_FREE_INPUT_FLAGS_VIRTIO_RING_VALID
/* Physical number of ring allocated. */
uint16_t ring_id;
- uint8_t unused_1[4];
+ /*
+ * Ring BD producer index posted by the virtio block.
+ * This field is valid if virtio_ring_valid flag is set.
+ */
+ uint32_t prod_idx;
+ /*
+ * User defined opaque field to be inserted into VEE_FLUSH completion
+ * record. This field is valid if virtio_ring_valid flag is set.
+ */
+ uint32_t opaque;
+ uint32_t unused_1;
} __rte_packed;
/* hwrm_ring_free_output (size:128b/16B) */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[4];
+ /*
+ * This field will tell whether to use ping or pong buffer
+ * for first push operation.
+ */
+ uint8_t push_buffer_index;
+ /* Start push from ping buffer index */
+ #define HWRM_RING_RESET_OUTPUT_PUSH_BUFFER_INDEX_PING_BUFFER \
+ UINT32_C(0x0)
+ /* Start push from pong buffer index */
+ #define HWRM_RING_RESET_OUTPUT_PUSH_BUFFER_INDEX_PONG_BUFFER \
+ UINT32_C(0x1)
+ #define HWRM_RING_RESET_OUTPUT_PUSH_BUFFER_INDEX_LAST \
+ HWRM_RING_RESET_OUTPUT_PUSH_BUFFER_INDEX_PONG_BUFFER
+ uint8_t unused_0[3];
/* Position of consumer index after ring reset completes. */
uint8_t consumer_idx[3];
/*
*****************/
-/* hwrm_ring_cfg_input (size:256b/32B) */
+/* hwrm_ring_cfg_input (size:320b/40B) */
struct hwrm_ring_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/* Update completion ring ID associated with Tx or Rx ring. */
#define HWRM_RING_CFG_INPUT_ENABLES_CMPL_RING_ID_UPDATE \
UINT32_C(0x10)
+ /*
+ * When set to '1', metadata value provided by tx_metadata
+ * field in this command is inserted in the lb_header_metadata
+ * QP context field. When set to '0', no change done to metadata.
+ * Firmware rejects the tx ring metadata programming with
+ * HWRM_ERR_CODE_UNSUPPORTED error if the per function CFA BD
+ * metadata feature is not disabled.
+ */
+ #define HWRM_RING_CFG_INPUT_ENABLES_TX_METADATA \
+ UINT32_C(0x20)
/*
* Proxy function FID value.
* This value is only used when either proxy_mode_enable flag or
*/
uint8_t rx_sop_pad_bytes;
uint8_t unused_1[3];
+ /*
+ * When tx_metadata enable bit is set, value specified in this field
+ * is copied to lb_header_metadata in the QP context.
+ */
+ uint32_t tx_metadata;
+ uint8_t unused_2[4];
} __rte_packed;
/* hwrm_ring_cfg_output (size:128b/16B) */
uint16_t ring_id;
} __rte_packed;
-/* hwrm_ring_qcfg_output (size:192b/24B) */
+/* hwrm_ring_qcfg_output (size:256b/32B) */
struct hwrm_ring_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
* This value is only used when rx_sop_pad_enable flag is set to '1'.
*/
uint8_t rx_sop_pad_bytes;
- uint8_t unused_0[6];
+ uint8_t unused_0[3];
+ /* lb_header_metadata in the QP context is copied to this field. */
+ uint32_t tx_metadata;
+ uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
UINT32_C(0x1)
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
- /* Setting of this flag indicates the applicability to the loopback path. */
+ /*
+ * Setting of this flag indicates the applicability to the loopback
+ * path.
+ */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
UINT32_C(0x2)
/*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
+ * Setting of this flag indicates drop action. If this flag is not
+ * set, then it should be considered accept action.
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP \
UINT32_C(0x4)
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
/* Any tunneled traffic */
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
/*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
+ * Setting of this flag indicates drop action. If this flag is not
+ * set, then it should be considered accept action.
*/
#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP \
UINT32_C(0x2)
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
*/
uint64_t resp_addr;
uint32_t flags;
- /* Setting of this flag indicates the applicability to the loopback path. */
+ /*
+ * Setting of this flag indicates the applicability to the loopback
+ * path.
+ */
#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
UINT32_C(0x1)
uint32_t enables;
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
/* Any tunneled traffic */
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
/* Any tunneled traffic */
HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
/* Tunnel alloc flags. */
uint8_t flags;
- /* Setting of this flag indicates modify existing redirect tunnel to new destination function ID. */
+ /*
+ * Setting of this flag indicates modify existing redirect tunnel
+ * to new destination function ID.
+ */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_FLAGS_MODIFY_DST \
UINT32_C(0x1)
uint8_t unused_0[4];
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_L2_ETYPE \
UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
/* Any tunneled traffic */
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_L2_ETYPE \
UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
/* Any tunneled traffic */
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
uint16_t dst_port;
/* VXLAN Network Identifier. */
uint32_t vni;
- /* 3 bytes VXLAN header reserve fields from 1st dword of the VXLAN header. */
+ /*
+ * 3 bytes VXLAN header reserve fields from 1st dword of the VXLAN
+ * header.
+ */
uint8_t hdr_rsvd0[3];
/* 1 byte VXLAN header reserve field from 2nd dword of the VXLAN header. */
uint8_t hdr_rsvd1;
*/
uint64_t resp_addr;
uint32_t flags;
- /* Setting of this flag indicates the applicability to the loopback path. */
+ /*
+ * Setting of this flag indicates the applicability to the loopback
+ * path.
+ */
#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_LOOPBACK \
UINT32_C(0x1)
/*
- * Setting of this flag indicates this encap record is external encap record.
- * Resetting of this flag indicates this flag is internal encap record and
- * this is the default setting.
+ * Setting of this flag indicates this encap record is external
+ * encap record. Resetting of this flag indicates this flag is
+ * internal encap record and this is the default setting.
*/
#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_EXTERNAL \
UINT32_C(0x2)
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_V4 \
UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2_ETYPE \
UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_LAST \
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
*/
uint64_t resp_addr;
uint32_t flags;
- /* Setting of this flag indicates the applicability to the loopback path. */
+ /*
+ * Setting of this flag indicates the applicability to the loopback
+ * path.
+ */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
UINT32_C(0x1)
/*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
+ * Setting of this flag indicates drop action. If this flag is not
+ * set, then it should be considered accept action.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP \
UINT32_C(0x2)
/*
- * Setting of this flag indicates that a meter is expected to be attached
- * to this flow. This hint can be used when choosing the action record
- * format required for the flow.
+ * Setting of this flag indicates that a meter is expected to be
+ * attached to this flow. This hint can be used when choosing the
+ * action record format required for the flow.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \
UINT32_C(0x4)
/*
- * Setting of this flag indicates that the dst_id field contains function ID.
- * If this is not set it indicates dest_id is VNIC or VPORT.
+ * Setting of this flag indicates that the dst_id field contains
+ * function ID. If this is not set it indicates dest_id is VNIC
+ * or VPORT.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_FID \
UINT32_C(0x8)
/*
- * Setting of this flag indicates match on arp reply when ethertype is 0x0806.
- * If this is not set it indicates no specific arp opcode matching.
+ * Setting of this flag indicates match on arp reply when ethertype
+ * is 0x0806. If this is not set it indicates no specific arp opcode
+ * matching.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_ARP_REPLY \
UINT32_C(0x10)
/*
- * Setting of this flag indicates that the dst_id field contains RFS ring
- * table index. If this is not set it indicates dst_id is VNIC or VPORT
- * or function ID. Note dest_fid and dest_rfs_ring_idx can’t be set at
- * the same time.
+ * Setting of this flag indicates that the dst_id field contains RFS
+ * ring table index. If this is not set it indicates dst_id is VNIC
+ * or VPORT or function ID. Note dest_fid and dest_rfs_ring_idx
+ * can’t be set at the same time.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_RFS_RING_IDX \
UINT32_C(0x20)
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
/* Any tunneled traffic */
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
uint32_t flags;
/*
* Setting this bit to 1 indicates that dest_id field contains FID.
- * Setting this to 0 indicates that dest_id field contains VNIC or VPORT.
+ * Setting this to 0 indicates that dest_id field contains VNIC or
+ * VPORT.
*/
#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_FID \
UINT32_C(0x1)
/*
* Setting of this flag indicates that the new_dst_id field contains
- * RFS ring table index. If this is not set it indicates new_dst_id is
- * VNIC or VPORT or function ID. Note dest_fid and dest_rfs_ring_idx
- * can’t be set at the same time.
+ * RFS ring table index. If this is not set it indicates new_dst_id
+ * is VNIC or VPORT or function ID. Note dest_fid and
+ * dest_rfs_ring_idx can’t be set at the same time.
*/
#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_RFS_RING_IDX \
UINT32_C(0x2)
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST \
HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX
/*
- * Setting of this flag indicates enabling of a byte counter for a given
- * flow.
+ * Setting of this flag indicates enabling of a byte counter for a
+ * given flow.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR UINT32_C(0x2)
/*
- * Setting of this flag indicates enabling of a packet counter for a given
- * flow.
+ * Setting of this flag indicates enabling of a packet counter for a
+ * given flow.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR UINT32_C(0x4)
- /* Setting of this flag indicates de-capsulation action for the given flow. */
+ /*
+ * Setting of this flag indicates de-capsulation action for the
+ * given flow.
+ */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP UINT32_C(0x8)
- /* Setting of this flag indicates encapsulation action for the given flow. */
+ /*
+ * Setting of this flag indicates encapsulation action for the
+ * given flow.
+ */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP UINT32_C(0x10)
/*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
+ * Setting of this flag indicates drop action. If this flag is not
+ * set, then it should be considered accept action.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x20)
/*
- * Setting of this flag indicates that a meter is expected to be attached
- * to this flow. This hint can be used when choosing the action record
- * format required for the flow.
+ * Setting of this flag indicates that a meter is expected to be
+ * attached to this flow. This hint can be used when choosing the
+ * action record format required for the flow.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_METER UINT32_C(0x40)
uint32_t enables;
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
/* Any tunneled traffic */
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
uint16_t resp_len;
uint32_t flags;
/*
- * Enumeration denoting the clock at which the Meter is running with.
- * This enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
+ * Enumeration denoting the clock at which the Meter is running
+ * with. This enumeration is used for resources that are similar
+ * for both TX and RX paths of the chip.
*/
#define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_MASK UINT32_C(0xf)
#define HWRM_CFA_METER_QCAPS_OUTPUT_FLAGS_CLOCK_SFT 0
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
#define HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_LAST \
HWRM_CFA_METER_INSTANCE_CFG_INPUT_METER_PROFILE_ID_INVALID
/*
- * This value identifies the ID of a meter instance that needs to be updated with
- * a new meter profile specified in this command.
+ * This value identifies the ID of a meter instance that needs to be
+ * updated with a new meter profile specified in this command.
*/
uint16_t meter_instance_id;
uint8_t unused_1[2];
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
/* Any tunneled traffic */
*/
uint16_t dst_id;
/*
- * If set, this value shall represent the L2 context that matches the L2
- * information of the decap filter.
+ * If set, this value shall represent the L2 context that matches the
+ * L2 information of the decap filter.
*/
uint16_t l2_ctxt_ref_id;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_LAST \
HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6
/*
- * when set to 1, indicates TX flow offload for function specified in src_fid and
- * the dst_fid should be set to invalid value. To indicate a VM to VM flow, both
- * of the path_tx and path_rx flags need to be set. For virtio vSwitch offload
- * case, the src_fid and dst_fid is set to the same fid value. For the SRIOV
- * vSwitch offload case, the src_fid and dst_fid must be set to the same VF FID
- * belong to the children VFs of the same PF to indicate VM to VM flow.
+ * when set to 1, indicates TX flow offload for function specified
+ * in src_fid and the dst_fid should be set to invalid value. To
+ * indicate a VM to VM flow, both of the path_tx and path_rx flags
+ * need to be set. For virtio vSwitch offload case, the src_fid and
+ * dst_fid is set to the same fid value. For the SRIOV vSwitch
+ * offload case, the src_fid and dst_fid must be set to the same VF
+ * FID belong to the children VFs of the same PF to indicate VM to
+ * VM flow.
*/
#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_PATH_TX \
UINT32_C(0x40)
/*
- * when set to 1, indicates RX flow offload for function specified in dst_fid and
- * the src_fid should be set to invalid value.
+ * when set to 1, indicates RX flow offload for function specified
+ * in dst_fid and the src_fid should be set to invalid value.
*/
#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_PATH_RX \
UINT32_C(0x80)
/*
- * Set to 1 to indicate matching of VXLAN VNI from the custom vxlan header is
- * required and the VXLAN VNI value is stored in the first 24 bits of the dmac field.
- * This flag is only valid when the flow direction is RX.
+ * Set to 1 to indicate matching of VXLAN VNI from the custom vxlan
+ * header is required and the VXLAN VNI value is stored in the first
+ * 24 bits of the dmac field. This flag is only valid when the flow
+ * direction is RX.
*/
#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_MATCH_VXLAN_IP_VNI \
UINT32_C(0x100)
- /* Set to 1 to indicate vhost_id is specified in the outer_vlan_tci field. */
+ /*
+ * Set to 1 to indicate vhost_id is specified in the outer_vlan_tci
+ * field.
+ */
#define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_VHOST_ID_USE_VLAN \
UINT32_C(0x200)
/*
uint32_t tunnel_handle;
uint16_t action_flags;
/*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
+ * Setting of this flag indicates drop action. If this flag is not
+ * set, then it should be considered accept action.
*/
#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FWD \
UINT32_C(0x1)
#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_RECYCLE \
UINT32_C(0x2)
/*
- * Setting of this flag indicates drop action. If this flag is not set,
- * then it should be considered accept action.
+ * Setting of this flag indicates drop action. If this flag is not
+ * set, then it should be considered accept action.
*/
#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_DROP \
UINT32_C(0x4)
#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TTL_DECREMENT \
UINT32_C(0x200)
/*
- * If set to 1 and flow direction is TX, it indicates decap of L2 header
- * and encap of tunnel header. If set to 1 and flow direction is RX, it
- * indicates decap of tunnel header and encap L2 header. The type of tunnel
- * is specified in the tunnel_type field.
+ * If set to 1 and flow direction is TX, it indicates decap of L2
+ * header and encap of tunnel header. If set to 1 and flow direction
+ * is RX, it indicates decap of tunnel header and encap L2 header.
+ * The type of tunnel is specified in the tunnel_type field.
*/
#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TUNNEL_IP \
UINT32_C(0x400)
#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FLOW_AGING_ENABLED \
UINT32_C(0x800)
/*
- * If set to 1 an attempt will be made to try to offload this flow to the
- * most optimal flow table resource. If set to 0, the flow will be
- * placed to the default flow table resource.
+ * If set to 1 an attempt will be made to try to offload this flow
+ * to the most optimal flow table resource. If set to 0, the flow
+ * will be placed to the default flow table resource.
*/
#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_PRI_HINT \
UINT32_C(0x1000)
/*
- * If set to 1 there will be no attempt to allocate an on-chip try to
- * offload this flow. If set to 0, which will keep compatibility with the
- * older drivers, will cause the FW to attempt to allocate an on-chip flow
- * counter for the newly created flow. This will keep the existing behavior
- * with EM flows which always had an associated flow counter.
+ * If set to 1 there will be no attempt to allocate an on-chip try
+ * to offload this flow. If set to 0, which will keep compatibility
+ * with the older drivers, will cause the FW to attempt to allocate
+ * an on-chip flow counter for the newly created flow. This will
+ * keep the existing behavior with EM flows which always had an
+ * associated flow counter.
*/
#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NO_FLOW_COUNTER_ALLOC \
UINT32_C(0x2000)
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
/* Any tunneled traffic */
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
#define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TUNNEL \
UINT32_C(0x10)
/*
- * If set to 1 and flow direction is TX, it indicates decap of L2 header
- * and encap of tunnel header. If set to 1 and flow direction is RX, it
- * indicates decap of tunnel header and encap L2 header.
+ * If set to 1 and flow direction is TX, it indicates decap of L2
+ * header and encap of tunnel header. If set to 1 and flow direction
+ * is RX, it indicates decap of tunnel header and encap L2 header.
*/
#define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_TUNNEL_IP \
UINT32_C(0x20)
#define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPGRE UINT32_C(0x8)
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_V4 UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPGRE_V1 UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_L2_ETYPE UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_GPE_V6 UINT32_C(0xc)
#define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_LAST \
HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VXLAN_GPE_V6
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_IPGRE_V1 \
UINT32_C(0xa)
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_L2_ETYPE \
UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_VXLAN_GPE_V6 \
UINT32_C(0xc)
/* Any tunneled traffic */
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
/* flags is 32 b */
uint32_t flags;
/*
- * Set to 1 to indicate the page size, page layers, and flow_handle_table_dma_addr
- * fields are valid. The flow flush operation should only flush the flows from the
- * flow table specified. This flag is set to 0 by older driver. For older firmware,
- * setting this flag has no effect.
+ * Set to 1 to indicate the page size, page layers, and
+ * flow_handle_table_dma_addr fields are valid. The flow flush
+ * operation should only flush the flows from the flow table
+ * specified. This flag is set to 0 by older driver. For older
+ * firmware, setting this flag has no effect.
*/
#define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_TABLE_VALID \
UINT32_C(0x1)
/*
- * Set to 1 to indicate flow flush operation to cleanup all the flows, meters, CFA
- * context memory tables etc. This flag is set to 0 by older driver. For older firmware,
- * setting this flag has no effect.
+ * Set to 1 to indicate flow flush operation to cleanup all the
+ * flows, meters, CFA context memory tables etc. This flag is set to
+ * 0 by older driver. For older firmware, setting this flag has no
+ * effect.
*/
#define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_ALL \
UINT32_C(0x2)
/*
- * Set to 1 to indicate flow flush operation to cleanup all the flows by the caller.
- * This flag is set to 0 by older driver. For older firmware, setting this flag has no effect.
+ * Set to 1 to indicate flow flush operation to cleanup all the
+ * flows by the caller. This flag is set to 0 by older driver. For
+ * older firmware, setting this flag has no effect.
*/
#define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_PORT \
UINT32_C(0x4)
- /* Set to 1 to indicate the flow counter IDs are included in the flow table. */
+ /*
+ * Set to 1 to indicate the flow counter IDs are included in the
+ * flow table.
+ */
#define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_INCL_FC \
UINT32_C(0x8000000)
/*
- * This specifies the size of flow handle entries provided by the driver
- * in the flow table specified below. Only two flow handle size enums are defined.
+ * This specifies the size of flow handle entries provided by the
+ * driver in the flow table specified below. Only two flow handle
+ * size enums are defined.
*/
#define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_HANDLE_ENTRY_SIZE_MASK \
UINT32_C(0xc0000000)
#define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
/* PBL pointer points to PTE table. */
#define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
- /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
#define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
#define HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LAST \
HWRM_CFA_FLOW_FLUSH_INPUT_PAGE_LEVEL_LVL_2
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
uint64_t resp_addr;
/* The bit field to enable per flow aging configuration. */
uint16_t enables;
- /* This bit must be '1' for the tcp flow timer field to be configured */
+ /*
+ * This bit must be '1' for the tcp flow timer field to be
+ * configured
+ */
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_TCP_FLOW_TIMER \
UINT32_C(0x1)
- /* This bit must be '1' for the tcp finish timer field to be configured */
+ /*
+ * This bit must be '1' for the tcp finish timer field to be
+ * configured
+ */
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_TCP_FIN_TIMER \
UINT32_C(0x2)
- /* This bit must be '1' for the udp flow timer field to be configured */
+ /*
+ * This bit must be '1' for the udp flow timer field to be
+ * configured
+ */
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_UDP_FLOW_TIMER \
UINT32_C(0x4)
- /* This bit must be '1' for the eem dma interval field to be configured */
+ /*
+ * This bit must be '1' for the eem dma interval field to be
+ * configured
+ */
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_DMA_INTERVAL \
UINT32_C(0x8)
- /* This bit must be '1' for the eem notice interval field to be configured */
+ /*
+ * This bit must be '1' for the eem notice interval field to be
+ * configured
+ */
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_NOTICE_INTERVAL \
UINT32_C(0x10)
- /* This bit must be '1' for the eem context memory maximum entries field to be configured */
+ /*
+ * This bit must be '1' for the eem context memory maximum entries
+ * field to be configured
+ */
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_MAX_ENTRIES \
UINT32_C(0x20)
- /* This bit must be '1' for the eem context memory ID field to be configured */
+ /*
+ * This bit must be '1' for the eem context memory ID field to be
+ * configured
+ */
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_ID \
UINT32_C(0x40)
- /* This bit must be '1' for the eem context memory type field to be configured */
+ /*
+ * This bit must be '1' for the eem context memory type field to be
+ * configured
+ */
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_ENABLES_EEM_CTX_MEM_TYPE \
UINT32_C(0x80)
uint8_t flags;
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_LAST \
HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_PATH_RX
- /* Enumeration denoting the enable, disable eem flow aging configuration. */
+ /*
+ * Enumeration denoting the enable, disable eem flow aging
+ * configuration.
+ */
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM UINT32_C(0x2)
/* tx path */
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_DISABLE \
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_LAST \
HWRM_CFA_FLOW_AGING_CFG_INPUT_FLAGS_EEM_ENABLE
uint8_t unused_0;
- /* The flow aging timer for all TCP flows, the unit is 100 milliseconds. */
+ /*
+ * The flow aging timer for all TCP flows, the unit is 100
+ * milliseconds.
+ */
uint32_t tcp_flow_timer;
- /* The TCP finished timer for all TCP flows, the unit is 100 milliseconds. */
+ /*
+ * The TCP finished timer for all TCP flows, the unit is 100
+ * milliseconds.
+ */
uint32_t tcp_fin_timer;
- /* The flow aging timer for all UDP flows, the unit is 100 milliseconds. */
+ /*
+ * The flow aging timer for all UDP flows, the unit is 100
+ * milliseconds.
+ */
uint32_t udp_flow_timer;
- /* The interval to dma eem ejection data to host memory, the unit is milliseconds. */
+ /*
+ * The interval to dma eem ejection data to host memory, the unit is
+ * milliseconds.
+ */
uint16_t eem_dma_interval;
- /* The interval to notify driver to read the eem ejection data, the unit is milliseconds. */
+ /*
+ * The interval to notify driver to read the eem ejection data, the
+ * unit is milliseconds.
+ */
uint16_t eem_notice_interval;
/* The maximum entries number in the eem context memory. */
uint32_t eem_ctx_max_entries;
/* The context memory ID for eem flow aging. */
uint16_t eem_ctx_id;
uint16_t eem_ctx_mem_type;
- /* The content of context memory is eem ejection data, the size of each entry is 4 bytes. */
+ /*
+ * The content of context memory is eem ejection data, the size of
+ * each entry is 4 bytes.
+ */
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_EJECTION_DATA \
UINT32_C(0x0)
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_LAST \
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* The direction for the flow aging configuration, 1 is rx path, 2 is tx path. */
+ /*
+ * The direction for the flow aging configuration, 1 is rx path, 2 is
+ * tx path.
+ */
uint8_t flags;
/* Enumeration denoting the RX, TX type of the resource. */
#define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* The current flow aging timer for all TCP flows, the unit is 100 millisecond. */
+ /*
+ * The current flow aging timer for all TCP flows, the unit is 100
+ * millisecond.
+ */
uint32_t tcp_flow_timer;
- /* The current TCP finished timer for all TCP flows, the unit is 100 millisecond. */
+ /*
+ * The current TCP finished timer for all TCP flows, the unit is 100
+ * millisecond.
+ */
uint32_t tcp_fin_timer;
- /* The current flow aging timer for all UDP flows, the unit is 100 millisecond. */
+ /*
+ * The current flow aging timer for all UDP flows, the unit is 100
+ * millisecond.
+ */
uint32_t udp_flow_timer;
- /* The interval to dma eem ejection data to host memory, the unit is milliseconds. */
+ /*
+ * The interval to dma eem ejection data to host memory, the unit is
+ * milliseconds.
+ */
uint16_t eem_dma_interval;
- /* The interval to notify driver to read the eem ejection data, the unit is milliseconds. */
+ /*
+ * The interval to notify driver to read the eem ejection data, the
+ * unit is milliseconds.
+ */
uint16_t eem_notice_interval;
/* The maximum entries number in the eem context memory. */
uint32_t eem_ctx_max_entries;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* The direction for the flow aging configuration, 1 is rx path, 2 is tx path. */
+ /*
+ * The direction for the flow aging configuration, 1 is rx path, 2 is
+ * tx path.
+ */
uint8_t flags;
/* Enumeration denoting the RX, TX type of the resource. */
#define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH UINT32_C(0x1)
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* The maximum flow aging timer for all TCP flows, the unit is 100 millisecond. */
+ /*
+ * The maximum flow aging timer for all TCP flows, the unit is 100
+ * millisecond.
+ */
uint32_t max_tcp_flow_timer;
- /* The maximum TCP finished timer for all TCP flows, the unit is 100 millisecond. */
+ /*
+ * The maximum TCP finished timer for all TCP flows, the unit is 100
+ * millisecond.
+ */
uint32_t max_tcp_fin_timer;
- /* The maximum flow aging timer for all UDP flows, the unit is 100 millisecond. */
+ /*
+ * The maximum flow aging timer for all UDP flows, the unit is 100
+ * millisecond.
+ */
uint32_t max_udp_flow_timer;
/* The maximum aging flows that HW can support. */
uint32_t max_aging_flows;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
uint16_t rx_ar_id_port0;
/* The port 1 RX mirror action record ID. */
uint16_t rx_ar_id_port1;
- /* The port 0 RX action record ID for TX TCP flag packets from loopback path. */
+ /*
+ * The port 0 RX action record ID for TX TCP flag packets from
+ * loopback path.
+ */
uint16_t tx_ar_id_port0;
- /* The port 1 RX action record ID for TX TCP flag packets from loopback path. */
+ /*
+ * The port 1 RX action record ID for TX TCP flag packets from
+ * loopback path.
+ */
uint16_t tx_ar_id_port1;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_cfa_vf_pair_alloc *
+ **************************/
+
+
+/* hwrm_cfa_vf_pair_alloc_input (size:448b/56B) */
+struct hwrm_cfa_vf_pair_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_a_id;
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_b_id;
+ uint8_t unused_0[4];
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
+} __rte_packed;
+
+/* hwrm_cfa_vf_pair_alloc_output (size:128b/16B) */
+struct hwrm_cfa_vf_pair_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_cfa_vf_pair_free *
+ *************************/
+
+
+/* hwrm_cfa_vf_pair_free_input (size:384b/48B) */
+struct hwrm_cfa_vf_pair_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
+} __rte_packed;
+
+/* hwrm_cfa_vf_pair_free_output (size:128b/16B) */
+struct hwrm_cfa_vf_pair_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_cfa_vf_pair_info *
+ *************************/
+
+
+/* hwrm_cfa_vf_pair_info_input (size:448b/56B) */
+struct hwrm_cfa_vf_pair_info_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /* If this flag is set, lookup by name else lookup by index. */
+ #define HWRM_CFA_VF_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1)
+ /* vf pair table index. */
+ uint16_t vf_pair_index;
+ uint8_t unused_0[2];
+ /* VF Pair name (32 byte string). */
+ char vf_pair_name[32];
+} __rte_packed;
+
+/* hwrm_cfa_vf_pair_info_output (size:512b/64B) */
+struct hwrm_cfa_vf_pair_info_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* vf pair table index. */
+ uint16_t next_vf_pair_index;
+ /* vf pair member a's vf_fid. */
+ uint16_t vf_a_fid;
+ /* vf pair member a's Linux logical VF number. */
+ uint16_t vf_a_index;
+ /* vf pair member b's vf_fid. */
+ uint16_t vf_b_fid;
+ /* vf pair member a's Linux logical VF number. */
+ uint16_t vf_b_index;
+ /* vf pair state. */
+ uint8_t pair_state;
+ /* Pair has been allocated */
+ #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1)
+ /* Both pair members are active */
+ #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2)
+ #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \
+ HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE
+ uint8_t unused_0[5];
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/***********************
+ * hwrm_cfa_pair_alloc *
+ ***********************/
+
+
+/* hwrm_cfa_pair_alloc_input (size:576b/72B) */
+struct hwrm_cfa_pair_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair,
+ * 5-rep2fn_mod, 6-rep2fn_modall, 7-rep2fn_truflow).
+ */
+ uint16_t pair_mode;
+ /* Pair between VF on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_VF2FN \
+ UINT32_C(0x0)
+ /* Pair between REP on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN \
+ UINT32_C(0x1)
+ /* Pair between REP on local host with REP on specified host. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2REP \
+ UINT32_C(0x2)
+ /* Pair for the proxy interface. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PROXY \
+ UINT32_C(0x3)
+ /* Pair for the PF interface. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PFPAIR \
+ UINT32_C(0x4)
+ /* Modify existing rep2fn pair and move pair to new PF. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MOD \
+ UINT32_C(0x5)
+ /*
+ * Modify existing rep2fn pairs paired with same PF and move pairs
+ * to new PF.
+ */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MODALL \
+ UINT32_C(0x6)
+ /*
+ * Truflow pair between REP on local host with PF or VF on specified
+ * host.
+ */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_TRUFLOW \
+ UINT32_C(0x7)
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_LAST \
+ HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_TRUFLOW
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_a_id;
+ /* Logical Host (0xff-local host). */
+ uint8_t host_b_id;
+ /* Logical PF (0xff-PF for command channel). */
+ uint8_t pf_b_id;
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_b_id;
+ /* Loopback port (0xff-internal loopback), valid for mode-3. */
+ uint8_t port_id;
+ /* Priority used for encap of loopback packets valid for mode-3. */
+ uint8_t pri;
+ /* New PF for rep2fn modify, valid for mode 5. */
+ uint16_t new_pf_fid;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the q_ab field to be
+ * configured.
+ */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_AB_VALID UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the q_ba field to be
+ * configured.
+ */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_BA_VALID UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the fc_ab field to be
+ * configured.
+ */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_AB_VALID UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the fc_ba field to be
+ * configured.
+ */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_BA_VALID UINT32_C(0x8)
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
+ /*
+ * The q_ab value specifies the logical index of the TX/RX CoS
+ * queue to be assigned for traffic in the A to B direction of
+ * the interface pair. The default value is 0.
+ */
+ uint8_t q_ab;
+ /*
+ * The q_ba value specifies the logical index of the TX/RX CoS
+ * queue to be assigned for traffic in the B to A direction of
+ * the interface pair. The default value is 1.
+ */
+ uint8_t q_ba;
+ /*
+ * Specifies whether RX ring flow control is disabled (0) or enabled
+ * (1) in the A to B direction. The default value is 0, meaning that
+ * packets will be dropped when the B-side RX rings are full.
+ */
+ uint8_t fc_ab;
+ /*
+ * Specifies whether RX ring flow control is disabled (0) or enabled
+ * (1) in the B to A direction. The default value is 1, meaning that
+ * the RX CoS queue will be flow controlled when the A-side RX rings
+ * are full.
+ */
+ uint8_t fc_ba;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_cfa_pair_alloc_output (size:192b/24B) */
+struct hwrm_cfa_pair_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Only valid for modes 1 and 2. */
+ uint16_t rx_cfa_code_a;
+ /* Only valid for modes 1 and 2. */
+ uint16_t tx_cfa_action_a;
+ /* Only valid for mode 2. */
+ uint16_t rx_cfa_code_b;
+ /* Only valid for mode 2. */
+ uint16_t tx_cfa_action_b;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_cfa_pair_free *
+ **********************/
+
+
+/* hwrm_cfa_pair_free_input (size:448b/56B) */
+struct hwrm_cfa_pair_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
+ /* Logical PF (0xff-PF for command channel). */
+ uint8_t pf_b_id;
+ uint8_t unused_0[3];
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_id;
+ /*
+ * Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair,
+ * 5-rep2fn_mod, 6-rep2fn_modall, 7-rep2fn_truflow).
+ */
+ uint16_t pair_mode;
+ /* Pair between VF on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_VF2FN UINT32_C(0x0)
+ /* Pair between REP on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN UINT32_C(0x1)
+ /* Pair between REP on local host with REP on specified host. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2REP UINT32_C(0x2)
+ /* Pair for the proxy interface. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_PROXY UINT32_C(0x3)
+ /* Pair for the PF interface. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_PFPAIR UINT32_C(0x4)
+ /* Modify existing rep2fn pair and move pair to new PF. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_MOD UINT32_C(0x5)
+ /*
+ * Modify existing rep2fn pairs paired with same PF and move pairs
+ * to new PF.
+ */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_MODALL UINT32_C(0x6)
+ /*
+ * Truflow pair between REP on local host with PF or VF on
+ * specified host.
+ */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_TRUFLOW UINT32_C(0x7)
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_LAST \
+ HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_TRUFLOW
+} __rte_packed;
+
+/* hwrm_cfa_pair_free_output (size:128b/16B) */
+struct hwrm_cfa_pair_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
*/
uint64_t resp_addr;
/* VF Representor name (32 byte string). */
- char vfr_name[32];
+ char vfr_name[32];
/* Logical VF number (range: 0 -> MAX_VFS -1). */
uint16_t vf_id;
+ /*
+ * This field is reserved for the future use.
+ * It shall be set to 0.
+ */
uint16_t reserved;
- uint8_t unused_0[4];
+ uint8_t unused_0[4];
} __rte_packed;
/* hwrm_cfa_vfr_free_output (size:128b/16B) */
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
-
-
/***************************************
* hwrm_cfa_redirect_query_tunnel_type *
***************************************/
/* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
#define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_V4 \
UINT32_C(0x200)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ /*
+ * Enhance Generic Routing Encapsulation (GRE version 1) inside IP
+ * datagram payload
+ */
#define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE_V1 \
UINT32_C(0x400)
/* Any tunneled traffic */
/* Use fixed layer 2 ether type of 0xFFFF */
#define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2_ETYPE \
UINT32_C(0x1000)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ /*
+ * IPV6 over virtual eXtensible Local Area Network with GPE header
+ * (IPV6oVXLANGPE)
+ */
#define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_GPE_V6 \
UINT32_C(0x2000)
uint8_t unused_0[3];
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
#define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
/* PBL pointer points to PTE table. */
#define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
- /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
#define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
#define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LAST \
HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2
/* The length of the response data in number of bytes. */
uint16_t resp_len;
/*
- * Id/Handle to the recently register context memory. This handle is passed
- * to the CFA feature.
+ * Id/Handle to the recently register context memory. This handle is
+ * passed to the CFA feature.
*/
uint16_t ctx_id;
uint8_t unused_0[5];
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /*
- * Id/Handle to the recently register context memory. This handle is passed
- * to the CFA feature.
- */
- uint16_t ctx_id;
- uint8_t unused_0[6];
+ /*
+ * Id/Handle to the recently register context memory. This handle is
+ * passed to the CFA feature.
+ */
+ uint16_t ctx_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_cfa_ctx_mem_unrgtr_output (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_unrgtr_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_cfa_ctx_mem_qctx *
+ *************************/
+
+
+/* hwrm_cfa_ctx_mem_qctx_input (size:192b/24B) */
+struct hwrm_cfa_ctx_mem_qctx_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Id/Handle to the recently register context memory. This handle is
+ * passed to the CFA feature.
+ */
+ uint16_t ctx_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_cfa_ctx_mem_qctx_output (size:256b/32B) */
+struct hwrm_cfa_ctx_mem_qctx_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t flags;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing to PTE
+ * tables.
+ */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LAST \
+ HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 256KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 1MB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 1GB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_LAST \
+ HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G
+ uint8_t unused_0[4];
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_cfa_ctx_mem_qcaps *
+ **************************/
+
+
+/* hwrm_cfa_ctx_mem_qcaps_input (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_cfa_ctx_mem_qcaps_output (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_qcaps_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Indicates the maximum number of context memory which can be
+ * registered.
+ */
+ uint16_t max_entries;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_cfa_counter_qcaps *
+ **************************/
+
+
+/* hwrm_cfa_counter_qcaps_input (size:128b/16B) */
+struct hwrm_cfa_counter_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
} __rte_packed;
-/* hwrm_cfa_ctx_mem_unrgtr_output (size:128b/16B) */
-struct hwrm_cfa_ctx_mem_unrgtr_output {
+/* hwrm_cfa_counter_qcaps_output (size:576b/72B) */
+struct hwrm_cfa_counter_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ uint32_t flags;
+ /* Enumeration denoting the supported CFA counter format. */
+ #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT \
+ UINT32_C(0x1)
+ /* CFA counter types are not supported. */
+ #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_NONE \
+ UINT32_C(0x0)
+ /* 64-bit packet counters followed by 64-bit byte counters format. */
+ #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT \
+ UINT32_C(0x1)
+ #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_LAST \
+ HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT
+ uint32_t unused_0;
+ /*
+ * Minimum guaranteed number of flow counters supported for this
+ * function, in RX direction.
+ */
+ uint32_t min_rx_fc;
+ /*
+ * Maximum non-guaranteed number of flow counters supported for this
+ * function, in RX direction.
+ */
+ uint32_t max_rx_fc;
+ /*
+ * Minimum guaranteed number of flow counters supported for this
+ * function, in TX direction.
+ */
+ uint32_t min_tx_fc;
+ /*
+ * Maximum non-guaranteed number of flow counters supported for this
+ * function, in TX direction.
+ */
+ uint32_t max_tx_fc;
+ /*
+ * Minimum guaranteed number of extension flow counters supported for
+ * this function, in RX direction.
+ */
+ uint32_t min_rx_efc;
+ /*
+ * Maximum non-guaranteed number of extension flow counters supported
+ * for this function, in RX direction.
+ */
+ uint32_t max_rx_efc;
+ /*
+ * Minimum guaranteed number of extension flow counters supported for
+ * this function, in TX direction.
+ */
+ uint32_t min_tx_efc;
+ /*
+ * Maximum non-guaranteed number of extension flow counters supported
+ * for this function, in TX direction.
+ */
+ uint32_t max_tx_efc;
+ /*
+ * Minimum guaranteed number of meter drop counters supported for
+ * this function, in RX direction.
+ */
+ uint32_t min_rx_mdc;
+ /*
+ * Maximum non-guaranteed number of meter drop counters supported for
+ * this function, in RX direction.
+ */
+ uint32_t max_rx_mdc;
+ /*
+ * Minimum guaranteed number of meter drop counters supported for this
+ * function, in TX direction.
+ */
+ uint32_t min_tx_mdc;
+ /*
+ * Maximum non-guaranteed number of meter drop counters supported for
+ * this function, in TX direction.
+ */
+ uint32_t max_tx_mdc;
+ /*
+ * Maximum guaranteed number of flow counters which can be used during
+ * flow alloc.
+ */
+ uint32_t max_flow_alloc_fc;
+ uint8_t unused_1[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
-/*************************
- * hwrm_cfa_ctx_mem_qctx *
- *************************/
+/************************
+ * hwrm_cfa_counter_cfg *
+ ************************/
-/* hwrm_cfa_ctx_mem_qctx_input (size:192b/24B) */
-struct hwrm_cfa_ctx_mem_qctx_input {
+/* hwrm_cfa_counter_cfg_input (size:256b/32B) */
+struct hwrm_cfa_counter_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /*
- * Id/Handle to the recently register context memory. This handle is passed
- * to the CFA feature.
- */
+ uint16_t flags;
+ /* Enumeration denoting the configuration mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE \
+ UINT32_C(0x1)
+ /* Disable the configuration mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_DISABLE \
+ UINT32_C(0x0)
+ /* Enable the configuration mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE \
+ UINT32_C(0x1)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_LAST \
+ HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE
+ /* Enumeration denoting the RX, TX type of the resource. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH \
+ UINT32_C(0x2)
+ /* Tx path. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_TX \
+ (UINT32_C(0x0) << 1)
+ /* Rx path. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX \
+ (UINT32_C(0x1) << 1)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX
+ /* Enumeration denoting the data transfer mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_MASK \
+ UINT32_C(0xc)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_SFT 2
+ /* Push mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PUSH \
+ (UINT32_C(0x0) << 2)
+ /* Pull mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL \
+ (UINT32_C(0x1) << 2)
+ /* Pull on async update. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC \
+ (UINT32_C(0x2) << 2)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_LAST \
+ HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC
+ uint16_t counter_type;
+ /* Flow counters. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_FC UINT32_C(0x0)
+ /* Extended flow counters. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_EFC UINT32_C(0x1)
+ /* Meter drop counters. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC UINT32_C(0x2)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_LAST \
+ HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC
+ /* Ctx memory handle to be used for the counter. */
uint16_t ctx_id;
- uint8_t unused_0[6];
+ /* Counter update cadence hint (only in Push mode). */
+ uint16_t update_tmr_ms;
+ /* Total number of entries. */
+ uint32_t num_entries;
+ uint32_t unused_0;
} __rte_packed;
-/* hwrm_cfa_ctx_mem_qctx_output (size:256b/32B) */
-struct hwrm_cfa_ctx_mem_qctx_output {
+/* hwrm_cfa_counter_cfg_output (size:128b/16B) */
+struct hwrm_cfa_counter_cfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint16_t flags;
- /* Counter PBL indirect levels. */
- uint8_t page_level;
- /* PBL pointer is physical start address. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
- /* PBL pointer points to PTE table. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
- /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LAST \
- HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2
- /* Page size. */
- uint8_t page_size;
- /* 4KB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0)
- /* 8KB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1)
- /* 64KB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4)
- /* 256KB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6)
- /* 1MB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8)
- /* 2MB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9)
- /* 4MB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa)
- /* 1GB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12)
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_LAST \
- HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G
- uint8_t unused_0[4];
- /* Pointer to the PBL, or PDL depending on number of levels */
- uint64_t page_dir;
- uint8_t unused_1[7];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
-/**************************
- * hwrm_cfa_ctx_mem_qcaps *
- **************************/
+/***************************
+ * hwrm_cfa_counter_qstats *
+ ***************************/
-/* hwrm_cfa_ctx_mem_qcaps_input (size:128b/16B) */
-struct hwrm_cfa_ctx_mem_qcaps_input {
+/* hwrm_cfa_counter_qstats_input (size:320b/40B) */
+struct hwrm_cfa_counter_qstats_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ uint16_t flags;
+ /* Enumeration denoting the RX, TX type of the resource. */
+ #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* Tx path. */
+ #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* Rx path. */
+ #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX
+ uint16_t counter_type;
+ uint16_t input_flow_ctx_id;
+ uint16_t num_entries;
+ uint16_t delta_time_ms;
+ uint16_t meter_instance_id;
+ uint16_t mdc_ctx_id;
+ uint8_t unused_0[2];
+ uint64_t expected_count;
} __rte_packed;
-/* hwrm_cfa_ctx_mem_qcaps_output (size:128b/16B) */
-struct hwrm_cfa_ctx_mem_qcaps_output {
+/* hwrm_cfa_counter_qstats_output (size:128b/16B) */
+struct hwrm_cfa_counter_qstats_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Indicates the maximum number of context memory which can be registered. */
- uint16_t max_entries;
- uint8_t unused_0[5];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
#define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_RX \
UINT32_C(0x2)
/*
- * When set to 1, indicates the the FW supports the Centralized
+ * When set to 1, indicates the FW supports the Centralized
* Memory Model. The concept designates one entity for the
* memory allocation while all others ‘subscribe’ to it.
*/
#define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
UINT32_C(0x4)
/*
- * When set to 1, indicates the the FW supports the Detached
+ * When set to 1, indicates the FW supports the Detached
* Centralized Memory Model. The memory is allocated and managed
* as a separate entity. All PFs and VFs will be granted direct
* or semi-direct access to the allocated memory while none of
#define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \
UINT32_C(0x8)
/*
- * If set to 1, then FID table used for implicit flow flush is supported.
- * If set to 0, then FID table used for implicit flow flush is not supported.
+ * If set to 1, then FID table used for implicit flow flush is
+ * supported.
+ * If set to 0, then FID table used for implicit flow flush is
+ * not supported.
*/
#define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \
UINT32_C(0x10)
/*
- * The maximum number of entries supported by EEM. When configuring the host memory
- * the number of numbers of entries that can supported are -
- * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M, 128M entries.
- * Any value that are not these values, the FW will round down to the closest support
- * number of entries.
+ * The maximum number of entries supported by EEM. When configuring
+ * the host memory, the number of numbers of entries that can
+ * supported are:
+ * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M, 128M
+ * entries.
+ * Any value that are not these values, the FW will round down to the
+ * closest support number of entries.
*/
uint32_t max_entries_supported;
/* The entry size in bytes of each entry in the EEM KEY0/KEY1 tables. */
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
uint16_t group_id;
uint16_t unused_0;
/*
- * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1,
- * RECORD, EFC all have the same number of entries and all tables will be configured
- * using this value. Current minimum value is 32k. Current maximum value is 128M.
+ * Configured EEM with the given number of entries. All the EEM tables
+ * KEY0, KEY1, RECORD, EFC all have the same number of entries and all
+ * tables will be configured using this value. Current minimum value
+ * is 32k. Current maximum value is 128M.
*/
uint32_t num_entries;
uint32_t unused_1;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_64BIT_SUPPORTED \
UINT32_C(0x2)
/*
- * Value of 1 to indicate firmware support flow batch delete operation through
- * HWRM_CFA_FLOW_FLUSH command.
- * Value of 0 to indicate that the firmware does not support flow batch delete
- * operation.
+ * Value of 1 to indicate firmware support flow batch delete
+ * operation through HWRM_CFA_FLOW_FLUSH command.
+ * Value of 0 to indicate that the firmware does not support flow
+ * batch delete operation.
*/
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_BATCH_DELETE_SUPPORTED \
UINT32_C(0x4)
/*
- * Value of 1 to indicate that the firmware support flow reset all operation through
- * HWRM_CFA_FLOW_FLUSH command.
- * Value of 0 indicates firmware does not support flow reset all operation.
+ * Value of 1 to indicate that the firmware support flow reset all
+ * operation through HWRM_CFA_FLOW_FLUSH command.
+ * Value of 0 indicates firmware does not support flow reset all
+ * operation.
*/
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_RESET_ALL_SUPPORTED \
UINT32_C(0x8)
/*
- * Value of 1 to indicate that firmware supports use of FID as dest_id in
- * HWRM_CFA_NTUPLE_ALLOC/CFG commands.
- * Value of 0 indicates firmware does not support use of FID as dest_id.
+ * Value of 1 to indicate that firmware supports use of FID as
+ * dest_id in HWRM_CFA_NTUPLE_ALLOC/CFG commands.
+ * Value of 0 indicates firmware does not support use of FID as
+ * dest_id.
*/
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_DEST_FUNC_SUPPORTED \
UINT32_C(0x10)
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RX_EEM_FLOW_SUPPORTED \
UINT32_C(0x40)
/*
- * Value of 1 to indicate that firmware supports the dynamic allocation of an
- * on-chip flow counter which can be used for EEM flows.
- * Value of 0 indicates firmware does not support the dynamic allocation of an
- * on-chip flow counter.
+ * Value of 1 to indicate that firmware supports the dynamic
+ * allocation of an on-chip flow counter which can be used for EEM
+ * flows. Value of 0 indicates firmware does not support the dynamic
+ * allocation of an on-chip flow counter.
*/
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_COUNTER_ALLOC_SUPPORTED \
UINT32_C(0x80)
*/
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ETHERTYPE_IP_SUPPORTED \
UINT32_C(0x4000)
+ /*
+ * When this bit is '1', it indicates that core firmware is
+ * capable of TruFlow. Driver can restrict sending HWRM CFA_FLOW_XXX
+ * and CFA_ENCAP_XXX, CFA_DECAP_XXX commands.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_TRUFLOW_CAPABLE \
+ UINT32_C(0x8000)
+ /*
+ * If set to 1, firmware is capable of supporting L2/ROCE as
+ * traffic type in flags field of HWRM_CFA_L2_FILTER_ALLOC command.
+ * By default, this flag should be 0 for older version of firmware.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_L2_FILTER_TRAFFIC_TYPE_L2_ROCE_SUPPORTED \
+ UINT32_C(0x10000)
+ /*
+ * If set to 1, firmware is capable of HW LAG. This bit is only
+ * advertised if the calling function is a PAXC function.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_LAG_SUPPORTED \
+ UINT32_C(0x20000)
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
* the newly created session.
*/
uint32_t fw_session_client_id;
- /* unused. */
- uint32_t unused0;
+ uint32_t flags;
+ /* Indicates if the shared session has been created. */
+ #define HWRM_TF_SESSION_OPEN_OUTPUT_FLAGS_SHARED_SESSION \
+ UINT32_C(0x1)
+ /*
+ * If this bit set to 0, then it indicates the shared session
+ * has been created by another session.
+ */
+ #define HWRM_TF_SESSION_OPEN_OUTPUT_FLAGS_SHARED_SESSION_NOT_CREATOR \
+ UINT32_C(0x0)
+ /*
+ * If this bit is set to 1, then it indicates the shared session
+ * is created by this session.
+ */
+ #define HWRM_TF_SESSION_OPEN_OUTPUT_FLAGS_SHARED_SESSION_CREATOR \
+ UINT32_C(0x1)
+ #define HWRM_TF_SESSION_OPEN_OUTPUT_FLAGS_SHARED_SESSION_LAST \
+ HWRM_TF_SESSION_OPEN_OUTPUT_FLAGS_SHARED_SESSION_CREATOR
/* unused. */
uint8_t unused1[3];
/*
uint8_t valid;
} __rte_packed;
+/*****************************
+ * hwrm_tf_session_resc_info *
+ *****************************/
+
+
+/* hwrm_tf_session_resc_info_input (size:320b/40B) */
+struct hwrm_tf_session_resc_info_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_SESSION_RESC_INFO_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_SESSION_RESC_INFO_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates tx flow. */
+ #define HWRM_TF_SESSION_RESC_INFO_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_INFO_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_SESSION_RESC_INFO_INPUT_FLAGS_DIR_TX
+ /*
+ * Defines the array size of the provided req_addr and
+ * resv_addr array buffers. Should be set to the number of
+ * request entries.
+ */
+ uint16_t req_size;
+ /*
+ * This is the DMA address for the request input data array
+ * buffer. Array is of tf_rm_resc_req_entry type. Size of the
+ * array buffer is provided by the 'req_size' field in this
+ * message.
+ */
+ uint64_t req_addr;
+ /*
+ * This is the DMA address for the resc output data array
+ * buffer. Array is of tf_rm_resc_entry type. Size of the array
+ * buffer is provided by the 'req_size' field in this
+ * message.
+ */
+ uint64_t resc_addr;
+} __rte_packed;
+
+/* hwrm_tf_session_resc_info_output (size:128b/16B) */
+struct hwrm_tf_session_resc_info_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Size of the returned tf_rm_resc_entry data array. The value
+ * cannot exceed the req_size defined by the input msg. The data
+ * array is returned using the resv_addr specified DMA
+ * address also provided by the input msg.
+ */
+ uint16_t size;
+ /* unused. */
+ uint8_t unused0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
/* TruFlow RM capability of a resource. */
/* tf_rm_resc_req_entry (size:64b/8B) */
struct tf_rm_resc_req_entry {
uint8_t valid;
} __rte_packed;
+/**************************
+ * hwrm_tf_ctxt_mem_alloc *
+ **************************/
+
+
+/* hwrm_tf_ctxt_mem_alloc_input (size:192b/24B) */
+struct hwrm_tf_ctxt_mem_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Size in KB of memory to be allocated. */
+ uint32_t mem_size;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+} __rte_packed;
+
+/* hwrm_tf_ctxt_mem_alloc_output (size:192b/24B) */
+struct hwrm_tf_ctxt_mem_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
+ /* Size of memory allocated. */
+ uint32_t mem_size;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing
+ * to PTE tables.
+ */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LAST \
+ HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 128KB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_128K UINT32_C(0x5)
+ /* 256KB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 512KB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_512K UINT32_C(0x7)
+ /* 1MB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 8MB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_8M UINT32_C(0xb)
+ /* 1GB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_LAST \
+ HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_1G
+ /* unused. */
+ uint8_t unused0;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_tf_ctxt_mem_free *
+ *************************/
+
+
+/* hwrm_tf_ctxt_mem_free_input (size:320b/40B) */
+struct hwrm_tf_ctxt_mem_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
+ /*
+ * PBL pointer points to PDE table with each entry pointing
+ * to PTE tables.
+ */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LAST \
+ HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 128KB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_128K UINT32_C(0x5)
+ /* 256KB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 512KB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_512K UINT32_C(0x7)
+ /* 1MB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 8MB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_8M UINT32_C(0xb)
+ /* 1GB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_LAST \
+ HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_1G
+ /* unused. */
+ uint8_t unused0[2];
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
+ /* Size of memory allocated. */
+ uint32_t mem_size;
+ /* unused. */
+ uint8_t unused1[4];
+} __rte_packed;
+
+/* hwrm_tf_ctxt_mem_free_output (size:128b/16B) */
+struct hwrm_tf_ctxt_mem_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* unused. */
+ uint8_t unused0[7];
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
/*************************
* hwrm_tf_ctxt_mem_rgtr *
*************************/
#define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
/* 64KB page size. */
#define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 128KB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_128K UINT32_C(0x5)
/* 256KB page size. */
#define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 512KB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_512K UINT32_C(0x7)
/* 1MB page size. */
#define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
/* 2MB page size. */
#define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
/* 4MB page size. */
#define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 8MB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_8M UINT32_C(0xb)
/* 1GB page size. */
#define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
#define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_LAST \
HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1G
- /* unused. */
- uint32_t unused0;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
/* Pointer to the PBL, or PDL depending on number of levels */
uint64_t page_dir;
} __rte_packed;
*/
uint16_t ctx_id;
/* unused. */
- uint8_t unused0[6];
+ uint8_t unused0[2];
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
} __rte_packed;
/* hwrm_tf_ctxt_mem_unrgtr_output (size:128b/16B) */
/* When set to 1, all offloaded flows will be sent to EXT EM. */
#define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \
UINT32_C(0x2)
- /* unused. */
- uint32_t unused0;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
} __rte_packed;
-/* hwrm_tf_ext_em_qcaps_output (size:320b/40B) */
+/* hwrm_tf_ext_em_qcaps_output (size:384b/48B) */
struct hwrm_tf_ext_em_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
uint16_t resp_len;
uint32_t flags;
/*
- * When set to 1, indicates the the FW supports the Centralized
+ * When set to 1, indicates the FW supports the Centralized
* Memory Model. The concept designates one entity for the
* memory allocation while all others ‘subscribe’ to it.
*/
#define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
UINT32_C(0x1)
/*
- * When set to 1, indicates the the FW supports the Detached
+ * When set to 1, indicates the FW supports the Detached
* Centralized Memory Model. The memory is allocated and managed
* as a separate entity. All PFs and VFs will be granted direct
* or semi-direct access to the allocated memory while none of
*/
#define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_DETACHED_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
UINT32_C(0x2)
+ /* When set to 1, indicates FW support for host based EEM memory. */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_HOST_MEMORY_SUPPORTED \
+ UINT32_C(0x4)
+ /* When set to 1, indicates FW support for on-chip based EEM memory. */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_FW_MEMORY_SUPPORTED \
+ UINT32_C(0x8)
/* unused. */
uint32_t unused0;
/* Support flags. */
*/
#define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \
UINT32_C(0x10)
+ /*
+ * If set to 1, then table scopes are supported.
+ * If set to 0, then table scopes are not supported.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_TBL_SCOPES \
+ UINT32_C(0x20)
/*
* The maximum number of entries supported by EXT EM. When
* configuring the host memory the number of numbers of
uint16_t efc_entry_size;
/* The FID size in bytes of each entry in the EXT EM FID tables. */
uint16_t fid_entry_size;
+ /* Maximum number of ctxt mem allocations allowed. */
+ uint32_t max_ctxt_mem_allocs;
+ /*
+ * Maximum number of static buckets that can be assigned to lookup
+ * table scopes.
+ */
+ uint32_t max_static_buckets;
/* unused. */
uint8_t unused1[7];
/*
*********************/
-/* hwrm_tf_ext_em_op_input (size:192b/24B) */
+/* hwrm_tf_ext_em_op_input (size:256b/32B) */
struct hwrm_tf_ext_em_op_input {
/* The HWRM command request type. */
uint16_t req_type;
HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_CLEANUP
/* unused. */
uint16_t unused1;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* unused. */
+ uint32_t unused2;
} __rte_packed;
/* hwrm_tf_ext_em_op_output (size:128b/16B) */
**********************/
-/* hwrm_tf_ext_em_cfg_input (size:384b/48B) */
+/* hwrm_tf_ext_em_cfg_input (size:512b/64B) */
struct hwrm_tf_ext_em_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
* maximum value is 128M.
*/
uint32_t num_entries;
- /* unused. */
- uint32_t unused1;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the group_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_GROUP_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the flush_interval field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_FLUSH_INTERVAL \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the num_entries field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_NUM_ENTRIES \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the key0_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_KEY0_CTX_ID \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the key1_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_KEY1_CTX_ID \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the record_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_RECORD_CTX_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the efc_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_EFC_CTX_ID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the fid_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_FID_CTX_ID \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the action_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_ACTION_CTX_ID \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the action_tbl_scope field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_ACTION_TBL_SCOPE \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the lkup_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_LKUP_CTX_ID \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the lkup_tbl_scope field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_LKUP_TBL_SCOPE \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the lkup_static_buckets field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_LKUP_STATIC_BUCKETS \
+ UINT32_C(0x1000)
/* Configured EXT EM with the given context if for KEY0 table. */
uint16_t key0_ctx_id;
/* Configured EXT EM with the given context if for KEY1 table. */
uint16_t efc_ctx_id;
/* Configured EXT EM with the given context if for EFC table. */
uint16_t fid_ctx_id;
+ /* Context id of action table scope. */
+ uint16_t action_ctx_id;
+ /* Table scope id used for action record entries. */
+ uint16_t action_tbl_scope;
+ /* Context id of lookup table scope. */
+ uint16_t lkup_ctx_id;
+ /* Table scope id used for EM lookup entries. */
+ uint16_t lkup_tbl_scope;
/* unused. */
- uint16_t unused2;
+ uint16_t unused1;
+ /*
+ * Number of 32B static buckets to be allocated at the beginning
+ * of table scope.
+ */
+ uint32_t lkup_static_buckets;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
/* unused. */
- uint32_t unused3;
+ uint32_t unused2;
} __rte_packed;
/* hwrm_tf_ext_em_cfg_output (size:128b/16B) */
#define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
#define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_LAST \
HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_TX
- /* unused. */
- uint32_t unused0;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
} __rte_packed;
-/* hwrm_tf_ext_em_qcfg_output (size:256b/32B) */
+/* hwrm_tf_ext_em_qcfg_output (size:448b/56B) */
struct hwrm_tf_ext_em_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* Configured EXT EM with the given context if for EFC table. */
uint16_t fid_ctx_id;
/* unused. */
- uint8_t unused0[5];
+ uint16_t unused0;
+ uint32_t supported;
+ /* This bit must be '1' for the group_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_GROUP_ID \
+ UINT32_C(0x1)
+ /* This bit must be '1' for the flush_interval field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_FLUSH_INTERVAL \
+ UINT32_C(0x2)
+ /* This bit must be '1' for the num_entries field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_NUM_ENTRIES \
+ UINT32_C(0x4)
+ /* This bit must be '1' for the key0_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_KEY0_CTX_ID \
+ UINT32_C(0x8)
+ /* This bit must be '1' for the key1_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_KEY1_CTX_ID \
+ UINT32_C(0x10)
+ /* This bit must be '1' for the record_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_RECORD_CTX_ID \
+ UINT32_C(0x20)
+ /* This bit must be '1' for the efc_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_EFC_CTX_ID \
+ UINT32_C(0x40)
+ /* This bit must be '1' for the fid_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_FID_CTX_ID \
+ UINT32_C(0x80)
+ /* This bit must be '1' for the action_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_ACTION_CTX_ID \
+ UINT32_C(0x100)
+ /* This bit must be '1' for the action_tbl_scope field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_ACTION_TBL_SCOPE \
+ UINT32_C(0x200)
+ /* This bit must be '1' for the lkup_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_LKUP_CTX_ID \
+ UINT32_C(0x400)
+ /* This bit must be '1' for the lkup_tbl_scope field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_LKUP_TBL_SCOPE \
+ UINT32_C(0x800)
+ /* This bit must be '1' for the lkup_static_buckets field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_LKUP_STATIC_BUCKETS \
+ UINT32_C(0x1000)
+ /*
+ * Group id is used by firmware to identify memory pools belonging
+ * to certain group.
+ */
+ uint16_t group_id;
+ /* EEM pending cache flush interval in 1/10th of second. */
+ uint8_t flush_interval;
+ /* unused. */
+ uint8_t unused1;
+ /* Context id of action table scope. */
+ uint16_t action_ctx_id;
+ /* Table scope id used for action record entries. */
+ uint16_t action_tbl_scope;
+ /* Context id of lookup table scope. */
+ uint16_t lkup_ctx_id;
+ /* Table scope id used for EM lookup entries. */
+ uint16_t lkup_tbl_scope;
+ /*
+ * Number of 32B static buckets to be allocated at the beginning
+ * of table scope.
+ */
+ uint32_t lkup_static_buckets;
+ /* unused. */
+ uint8_t unused2[7];
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
uint32_t unused0;
} __rte_packed;
+/**************************
+ * hwrm_tf_em_hash_insert *
+ **************************/
+
+
+/* hwrm_tf_em_hash_insert_input (size:1024b/128B) */
+struct hwrm_tf_em_hash_insert_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Firmware Session Id. */
+ uint32_t fw_session_id;
+ /* Control Flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EM_HASH_INSERT_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EM_HASH_INSERT_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_EM_HASH_INSERT_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_EM_HASH_INSERT_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EM_HASH_INSERT_INPUT_FLAGS_DIR_TX
+ /* Number of bits in the EM record. */
+ uint16_t em_record_size_bits;
+ /* CRC32 hash of key. */
+ uint32_t key0_hash;
+ /* Lookup3 hash of key. */
+ uint32_t key1_hash;
+ /* Index of EM record. */
+ uint32_t em_record_idx;
+ /* Unused. */
+ uint32_t unused0;
+ /* EM record. */
+ uint64_t em_record[11];
+} __rte_packed;
+
+/* hwrm_tf_em_hash_insert_output (size:128b/16B) */
+struct hwrm_tf_em_hash_insert_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* EM record pointer index. */
+ uint16_t rptr_index;
+ /* EM record offset 0~3. */
+ uint8_t rptr_entry;
+ /* Number of word entries consumed by the key. */
+ uint8_t num_of_entries;
+ /* unused. */
+ uint32_t unused0;
+} __rte_packed;
+
/*********************
* hwrm_tf_em_delete *
*********************/
uint16_t unused0[3];
} __rte_packed;
+/*******************
+ * hwrm_tf_em_move *
+ *******************/
+
+
+/* hwrm_tf_em_move_input (size:320b/40B) */
+struct hwrm_tf_em_move_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Session Id. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EM_MOVE_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EM_MOVE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates tx flow. */
+ #define HWRM_TF_EM_MOVE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_EM_MOVE_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EM_MOVE_INPUT_FLAGS_DIR_TX
+ /* Number of EM entry blocks */
+ uint16_t num_blocks;
+ /* New index for entry */
+ uint32_t new_index;
+ /* Unused */
+ uint32_t unused0;
+ /* EM internal flow handle. */
+ uint64_t flow_handle;
+} __rte_packed;
+
+/* hwrm_tf_em_move_output (size:128b/16B) */
+struct hwrm_tf_em_move_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Index of old entry. */
+ uint16_t em_index;
+ /* unused. */
+ uint16_t unused0[3];
+} __rte_packed;
+
/********************
* hwrm_tf_tcam_set *
********************/
uint8_t valid;
} __rte_packed;
+/*****************************
+ * hwrm_tf_tbl_type_bulk_get *
+ *****************************/
+
+
+/* hwrm_tf_tbl_type_bulk_get_input (size:384b/48B) */
+struct hwrm_tf_tbl_type_bulk_get_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR_TX
+ /* unused. */
+ uint8_t unused0[2];
+ /*
+ * Type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
+ */
+ uint32_t type;
+ /* Starting index of the type to retrieve. */
+ uint32_t start_index;
+ /* Number of entries to retrieve. */
+ uint32_t num_entries;
+ /* Number of entries to retrieve. */
+ uint32_t unused1;
+ /* Host memory where data will be stored. */
+ uint64_t host_addr;
+} __rte_packed;
+
+/* hwrm_tf_tbl_type_bulk_get_output (size:128b/16B) */
+struct hwrm_tf_tbl_type_bulk_get_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Response code. */
+ uint32_t resp_code;
+ /* Response size. */
+ uint16_t size;
+ /* unused */
+ uint8_t unused0;
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
/******************************
* hwrm_tunnel_dst_port_query *
******************************/
* support TPA v2, additional TPA related stats exist and can be retrieved
* by DMA of ctx_hw_stats_ext, rather than legacy ctx_hw_stats structure.
*/
-/* ctx_hw_stats_ext (size:1344b/168B) */
+/* ctx_hw_stats_ext (size:1408b/176B) */
struct ctx_hw_stats_ext {
/* Number of received unicast packets */
uint64_t rx_ucast_pkts;
uint64_t rx_tpa_bytes;
/* Number of TPA errors */
uint64_t rx_tpa_errors;
+ /* Number of TPA events */
+ uint64_t rx_tpa_events;
} __rte_packed;
/* Periodic Engine statistics context DMA to host. */
uint64_t tx_mcast_pkts;
/* Number of transmitted broadcast packets */
uint64_t tx_bcast_pkts;
- /* Number of transmitted packets with error */
- uint64_t tx_err_pkts;
- /* Number of dropped packets on transmit path */
- uint64_t tx_drop_pkts;
+ /* Number of packets discarded in transmit path */
+ uint64_t tx_discard_pkts;
+ /* Number of packets in transmit path with error */
+ uint64_t tx_error_pkts;
/* Number of transmitted bytes for unicast traffic */
uint64_t tx_ucast_bytes;
/* Number of transmitted bytes for multicast traffic */
uint64_t rx_mcast_pkts;
/* Number of received broadcast packets */
uint64_t rx_bcast_pkts;
- /* Number of received packets with error */
- uint64_t rx_err_pkts;
- /* Number of dropped packets on receive path */
- uint64_t rx_drop_pkts;
+ /* Number of packets discarded in receive path */
+ uint64_t rx_discard_pkts;
+ /* Number of packets in receive path with errors */
+ uint64_t rx_error_pkts;
/* Number of received bytes for unicast traffic */
uint64_t rx_ucast_bytes;
/* Number of received bytes for multicast traffic */
uint8_t unused_0[3];
} __rte_packed;
-/* hwrm_stat_ext_ctx_query_output (size:1472b/184B) */
+/* hwrm_stat_ext_ctx_query_output (size:1536b/192B) */
struct hwrm_stat_ext_ctx_query_output {
/* The specific error status for the command. */
uint16_t error_code;
uint64_t rx_tpa_bytes;
/* Number of TPA errors */
uint64_t rx_tpa_errors;
+ /* Number of TPA events */
+ uint64_t rx_tpa_events;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* This is where the source data is.
*/
uint64_t host_src_addr;
- /* The Directory Entry Type (valid values are defined in the bnxnvm_directory_type enum defined in the file bnxnvm_defs.h). */
+ /*
+ * The Directory Entry Type (valid values are defined in the
+ * bnxnvm_directory_type enum defined in the file bnxnvm_defs.h).
+ */
uint16_t dir_type;
/*
* Directory ordinal.
/* Directory Entry Attribute flags (see BNX_DIR_ATTR_* in the file bnxnvm_defs.h). */
uint16_t dir_attr;
/*
- * Length of data to write, in bytes. May be less than or equal to the allocated size for the directory entry.
- * The data length stored in the directory entry will be updated to reflect this value once the write is complete.
+ * Length of data to write, in bytes.May be
+ * less than or equal to the allocated size for the directory entry.
+ * The data length stored in the directory entry will be updated to
+ * reflect this value once the write is complete.
*/
uint32_t dir_data_length;
/* Option. */
#define HWRM_NVM_WRITE_INPUT_FLAGS_KEEP_ORIG_ACTIVE_IMG \
UINT32_C(0x1)
/*
- * The requested length of the allocated NVM for the item, in bytes. This value may be greater than or equal to the specified data length (dir_data_length).
+ * The requested length of the allocated NVM for the item, in bytes.
+ * This value may be greater than or equal to the specified data length (dir_data_length).
* If this value is less than the specified data length, it will be ignored.
- * The response will contain the actual allocated item length, which may be greater than the requested item length.
- * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accommodate
- * the potential future growth of an item (e.g. upgraded firmware with a size increase, log growth, expanded configuration data).
+ * The response will contain the actual allocated item length, which may
+ * be greater than the requested item length.
+ * The purpose for allocating more than the required number of bytes for
+ * an item's data is to pre-allocate extra storage (padding) to accommodate
+ * the potential future growth of an item (e.g. upgraded firmware with
+ * a size increase, log growth, expanded configuration data).
*/
uint32_t dir_item_length;
uint32_t unused_0;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
/*
- * Length of the allocated NVM for the item, in bytes. The value may be greater than or equal to the specified data length or the requested item length.
- * The actual item length used when creating a new directory entry will be a multiple of an NVM block size.
+ * Length of the allocated NVM for the item, in bytes. The value may be
+ * greater than or equal to the specified data length or the requested item length.
+ * The actual item length used when creating a new directory entry will
+ * be a multiple of an NVM block size.
*/
uint32_t dir_item_length;
/* The directory index of the created or modified item. */
uint64_t resp_addr;
} __rte_packed;
-/* hwrm_nvm_get_dev_info_output (size:256b/32B) */
+/* hwrm_nvm_get_dev_info_output (size:640b/80B) */
struct hwrm_nvm_get_dev_info_output {
/* The specific error status for the command. */
uint16_t error_code;
/* Total size, in bytes of the NVRAM device. */
uint32_t nvram_size;
uint32_t reserved_size;
- /* Available size that can be used, in bytes. Available size is the NVRAM size take away the used size and reserved size. */
+ /*
+ * Available size that can be used, in bytes. Available size is the
+ * NVRAM size take away the used size and reserved size.
+ */
uint32_t available_size;
/* This field represents the major version of NVM cfg */
uint8_t nvm_cfg_ver_maj;
uint8_t nvm_cfg_ver_min;
/* This field represents the update version of NVM cfg */
uint8_t nvm_cfg_ver_upd;
+ uint8_t flags;
+ /*
+ * If set to 1, firmware will provide various firmware version
+ * information stored in the flash.
+ */
+ #define HWRM_NVM_GET_DEV_INFO_OUTPUT_FLAGS_FW_VER_VALID \
+ UINT32_C(0x1)
+ /*
+ * This field represents the board package name stored in the flash.
+ * (ASCII chars with NULL at the end).
+ */
+ char pkg_name[16];
+ /*
+ * This field represents the major version of HWRM firmware, stored in
+ * the flash.
+ */
+ uint16_t hwrm_fw_major;
+ /*
+ * This field represents the minor version of HWRM firmware, stored in
+ * the flash.
+ */
+ uint16_t hwrm_fw_minor;
+ /*
+ * This field represents the build version of HWRM firmware, stored in
+ * the flash.
+ */
+ uint16_t hwrm_fw_build;
+ /*
+ * This field can be used to represent firmware branches or customer
+ * specific releases tied to a specific (major, minor, build) version
+ * of the HWRM firmware.
+ */
+ uint16_t hwrm_fw_patch;
+ /*
+ * This field represents the major version of mgmt firmware, stored in
+ * the flash.
+ */
+ uint16_t mgmt_fw_major;
+ /*
+ * This field represents the minor version of mgmt firmware, stored in
+ * the flash.
+ */
+ uint16_t mgmt_fw_minor;
+ /*
+ * This field represents the build version of mgmt firmware, stored in
+ * the flash.
+ */
+ uint16_t mgmt_fw_build;
+ /*
+ * This field can be used to represent firmware branches or customer
+ * specific releases tied to a specific (major, minor, build) version
+ * of the mgmt firmware.
+ */
+ uint16_t mgmt_fw_patch;
+ /*
+ * This field represents the major version of roce firmware, stored in
+ * the flash.
+ */
+ uint16_t roce_fw_major;
+ /*
+ * This field represents the minor version of roce firmware, stored in
+ * the flash.
+ */
+ uint16_t roce_fw_minor;
+ /*
+ * This field represents the build version of roce firmware, stored in
+ * the flash.
+ */
+ uint16_t roce_fw_build;
+ /*
+ * This field can be used to represent firmware branches or customer
+ * specific releases tied to a specific (major, minor, build) version
+ * of the roce firmware.
+ */
+ uint16_t roce_fw_patch;
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* The (0-based) instance of this Directory Type.
*/
uint16_t dir_ordinal;
- /* The Directory Entry Extension flags (see BNX_DIR_EXT_* for extension flag definitions). */
+ /*
+ * The Directory Entry Extension flags (see BNX_DIR_EXT_* for
+ * extension flag definitions).
+ */
uint16_t dir_ext;
/* Directory Entry Attribute flags (see BNX_DIR_ATTR_* for attribute flag definitions). */
uint16_t dir_attr;
#define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ERASE_UNUSED_SPACE \
UINT32_C(0x1)
/*
- * If set to 1, then unspecified images, images not in the package file, will be safely deleted.
- * When combined with erase_unused_space then unspecified images will be securely erased.
+ * If set to 1, then unspecified images, images not in the package file,
+ * will be safely deleted.
+ * When combined with erase_unused_space then unspecified images will be
+ * securely erased.
*/
#define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_REMOVE_UNUSED_PKG \
UINT32_C(0x2)
/* index for the 4th dimensions */
uint16_t index_3;
uint8_t flags;
- /* When this bit is 1, flush internal cache after this write operation (see hwrm_nvm_flush command.) */
+ /*
+ * When this bit is 1, flush internal cache after this write operation
+ * (see hwrm_nvm_flush command.)
+ */
#define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FORCE_FLUSH \
UINT32_C(0x1)
/* encryption method */
*/
#define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST \
UINT32_C(0x4)
- /* AP processor complex (in multi-host environment). Use host_idx to control which core is reset */
+ /*
+ * AP processor complex (in multi-host environment).
+ * Use host_idx to control which core is reset
+ */
#define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_AP \
UINT32_C(0x5)
/* Reset all blocks of the chip (including all processors) */
#define HCOMM_STATUS_STRUCT_LOC 0x31001F0UL
/**************************
- * hwrm_cfa_counter_qcaps *
+ * hwrm_port_phy_i2c_read *
**************************/
-/* hwrm_cfa_counter_qcaps_input (size:128b/16B) */
-struct hwrm_cfa_counter_qcaps_input {
+/* hwrm_port_phy_i2c_read_input (size:320b/40B) */
+struct hwrm_port_phy_i2c_read_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __rte_packed;
-
-/* hwrm_cfa_counter_qcaps_output (size:576b/72B) */
-struct hwrm_cfa_counter_qcaps_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
- uint16_t resp_len;
uint32_t flags;
- /* Enumeration denoting the supported CFA counter format. */
- #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT \
- UINT32_C(0x1)
- /* CFA counter types are not supported. */
- #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_NONE \
- UINT32_C(0x0)
- /* 64-bit packet counters followed by 64-bit byte counters format. */
- #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT \
- UINT32_C(0x1)
- #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_LAST \
- HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT
- uint32_t unused_0;
- /* Minimum guaranteed number of flow counters supported for this function, in RX direction. */
- uint32_t min_rx_fc;
- /* Maximum non-guaranteed number of flow counters supported for this function, in RX direction. */
- uint32_t max_rx_fc;
- /* Minimum guaranteed number of flow counters supported for this function, in TX direction. */
- uint32_t min_tx_fc;
- /* Maximum non-guaranteed number of flow counters supported for this function, in TX direction. */
- uint32_t max_tx_fc;
- /* Minimum guaranteed number of extension flow counters supported for this function, in RX direction. */
- uint32_t min_rx_efc;
- /* Maximum non-guaranteed number of extension flow counters supported for this function, in RX direction. */
- uint32_t max_rx_efc;
- /* Minimum guaranteed number of extension flow counters supported for this function, in TX direction. */
- uint32_t min_tx_efc;
- /* Maximum non-guaranteed number of extension flow counters supported for this function, in TX direction. */
- uint32_t max_tx_efc;
- /* Minimum guaranteed number of meter drop counters supported for this function, in RX direction. */
- uint32_t min_rx_mdc;
- /* Maximum non-guaranteed number of meter drop counters supported for this function, in RX direction. */
- uint32_t max_rx_mdc;
- /* Minimum guaranteed number of meter drop counters supported for this function, in TX direction. */
- uint32_t min_tx_mdc;
- /* Maximum non-guaranteed number of meter drop counters supported for this function, in TX direction. */
- uint32_t max_tx_mdc;
- /* Maximum guaranteed number of flow counters which can be used during flow alloc. */
- uint32_t max_flow_alloc_fc;
- uint8_t unused_1[3];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
- */
- uint8_t valid;
-} __rte_packed;
-
-/************************
- * hwrm_cfa_counter_cfg *
- ************************/
-
-
-/* hwrm_cfa_counter_cfg_input (size:256b/32B) */
-struct hwrm_cfa_counter_cfg_input {
- /* The HWRM command request type. */
- uint16_t req_type;
- /*
- * The completion ring to send the completion event on. This should
- * be the NQ ID returned from the `nq_alloc` HWRM command.
- */
- uint16_t cmpl_ring;
- /*
- * The sequence ID is used by the driver for tracking multiple
- * commands. This ID is treated as opaque data by the firmware and
- * the value is returned in the `hwrm_resp_hdr` upon completion.
- */
- uint16_t seq_id;
- /*
- * The target ID of the command:
- * * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
- * * 0xFFFD - Reserved for user-space HWRM interface
- * * 0xFFFF - HWRM
- */
- uint16_t target_id;
- /*
- * A physical address pointer pointing to a host buffer that the
- * command's response data will be written. This can be either a host
- * physical address (HPA) or a guest physical address (GPA) and must
- * point to a physically contiguous block of memory.
- */
- uint64_t resp_addr;
- uint16_t flags;
- /* Enumeration denoting the configuration mode. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE \
- UINT32_C(0x1)
- /* Disable the configuration mode. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_DISABLE \
- UINT32_C(0x0)
- /* Enable the configuration mode. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE \
- UINT32_C(0x1)
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_LAST \
- HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE
- /* Enumeration denoting the RX, TX type of the resource. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH \
- UINT32_C(0x2)
- /* Tx path. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_TX \
- (UINT32_C(0x0) << 1)
- /* Rx path. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX \
- (UINT32_C(0x1) << 1)
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX
- /* Enumeration denoting the data transfer mode. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_MASK \
- UINT32_C(0xc)
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_SFT 2
- /* Push mode. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PUSH \
- (UINT32_C(0x0) << 2)
- /* Pull mode. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL \
- (UINT32_C(0x1) << 2)
- /* Pull on async update. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC \
- (UINT32_C(0x2) << 2)
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_LAST \
- HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC
- uint16_t counter_type;
- /* Flow counters. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_FC UINT32_C(0x0)
- /* Extended flow counters. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_EFC UINT32_C(0x1)
- /* Meter drop counters. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC UINT32_C(0x2)
- #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_LAST \
- HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC
- /* Ctx memory handle to be used for the counter. */
- uint16_t ctx_id;
- /* Counter update cadence hint (only in Push mode). */
- uint16_t update_tmr_ms;
- /* Total number of entries. */
- uint32_t num_entries;
- uint32_t unused_0;
-} __rte_packed;
-
-/* hwrm_cfa_counter_cfg_output (size:128b/16B) */
-struct hwrm_cfa_counter_cfg_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
- uint16_t resp_len;
- uint8_t unused_0[7];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
- */
- uint8_t valid;
-} __rte_packed;
-
-/***************************
- * hwrm_cfa_counter_qstats *
- ***************************/
-
-
-/* hwrm_cfa_counter_qstats_input (size:320b/40B) */
-struct hwrm_cfa_counter_qstats_input {
- /* The HWRM command request type. */
- uint16_t req_type;
- /*
- * The completion ring to send the completion event on. This should
- * be the NQ ID returned from the `nq_alloc` HWRM command.
- */
- uint16_t cmpl_ring;
- /*
- * The sequence ID is used by the driver for tracking multiple
- * commands. This ID is treated as opaque data by the firmware and
- * the value is returned in the `hwrm_resp_hdr` upon completion.
- */
- uint16_t seq_id;
+ uint32_t enables;
/*
- * The target ID of the command:
- * * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
- * * 0xFFFD - Reserved for user-space HWRM interface
- * * 0xFFFF - HWRM
+ * This bit must be '1' for the page_offset field to be
+ * configured.
*/
- uint16_t target_id;
+ #define HWRM_PORT_PHY_I2C_READ_INPUT_ENABLES_PAGE_OFFSET 0x1UL
+ /* Port ID of port. */
+ uint16_t port_id;
+ /* 8-bit I2C slave address. */
+ uint8_t i2c_slave_addr;
+ uint8_t unused_0;
+ /* The page number that is being accessed over I2C. */
+ uint16_t page_number;
+ /* Offset within the page that is being accessed over I2C. */
+ uint16_t page_offset;
/*
- * A physical address pointer pointing to a host buffer that the
- * command's response data will be written. This can be either a host
- * physical address (HPA) or a guest physical address (GPA) and must
- * point to a physically contiguous block of memory.
+ * Length of data to read, in bytes starting at the offset
+ * specified above. If the offset is not specified, then
+ * the data shall be read from the beginning of the page.
*/
- uint64_t resp_addr;
- uint16_t flags;
- /* Enumeration denoting the RX, TX type of the resource. */
- #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* Tx path. */
- #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
- /* Rx path. */
- #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
- #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX
- uint16_t counter_type;
- uint16_t input_flow_ctx_id;
- uint16_t num_entries;
- uint16_t delta_time_ms;
- uint16_t meter_instance_id;
- uint16_t mdc_ctx_id;
- uint8_t unused_0[2];
- uint64_t expected_count;
+ uint8_t data_length;
+ uint8_t unused_1[7];
} __rte_packed;
-/* hwrm_cfa_counter_qstats_output (size:128b/16B) */
-struct hwrm_cfa_counter_qstats_output {
+/* hwrm_port_phy_i2c_read_output (size:640b/80B) */
+struct hwrm_port_phy_i2c_read_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* Up to 64B of data. */
+ uint32_t data[16];
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
*/
uint8_t valid;
} __rte_packed;
-
#endif /* _HSI_STRUCT_DEF_DPDK_H_ */
git.droids-corp.org / dpdk.git / blobdiff