* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* This is the HWRM response header. */
/* hwrm_resp_hdr (size:64b/8B) */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
-} __attribute__((packed));
+} __rte_packed;
/*
* TLV encapsulated message. Use the TLV type field of the
#define TLV_TYPE_ENGINE_CKV_AUTH_TAG UINT32_C(0x8004)
/* Engine CKV - The encrypted data. */
#define TLV_TYPE_ENGINE_CKV_CIPHERTEXT UINT32_C(0x8005)
-/* Engine CKV - Supported algorithms. */
-#define TLV_TYPE_ENGINE_CKV_ALGORITHMS UINT32_C(0x8006)
+/* Engine CKV - Supported host_algorithms. */
+#define TLV_TYPE_ENGINE_CKV_HOST_ALGORITHMS UINT32_C(0x8006)
/* Engine CKV - The Host EC curve name and ECC public key information. */
#define TLV_TYPE_ENGINE_CKV_HOST_ECC_PUBLIC_KEY UINT32_C(0x8007)
/* Engine CKV - The ECDSA signature. */
#define TLV_TYPE_ENGINE_CKV_ECDSA_SIGNATURE UINT32_C(0x8008)
-/* Engine CKV - The SRT EC curve name and ECC public key information. */
-#define TLV_TYPE_ENGINE_CKV_SRT_ECC_PUBLIC_KEY UINT32_C(0x8009)
+/* Engine CKV - The firmware EC curve name and ECC public key information. */
+#define TLV_TYPE_ENGINE_CKV_FW_ECC_PUBLIC_KEY UINT32_C(0x8009)
+/* Engine CKV - Supported firmware algorithms. */
+#define TLV_TYPE_ENGINE_CKV_FW_ALGORITHMS UINT32_C(0x800a)
#define TLV_TYPE_LAST \
- TLV_TYPE_ENGINE_CKV_SRT_ECC_PUBLIC_KEY
+ TLV_TYPE_ENGINE_CKV_FW_ALGORITHMS
/* tlv (size:64b/8B) */
* and it must be an integer multiple of 8B.
*/
uint16_t length;
-} __attribute__((packed));
+} __rte_packed;
/* Input */
/* input (size:128b/16B) */
* and must be cleared to zero before the request is made.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* Output */
/* output (size:64b/8B) */
* memory.
*/
uint16_t resp_len;
-} __attribute__((packed));
+} __rte_packed;
/* Short Command Structure */
/* hwrm_short_input (size:128b/16B) */
* This area must be 16B aligned.
*/
uint64_t req_addr;
-} __attribute__((packed));
+} __rte_packed;
/*
* Command numbering
#define HWRM_QUEUE_PRI2COS_CFG UINT32_C(0x38)
#define HWRM_QUEUE_COS2BW_QCFG UINT32_C(0x39)
#define HWRM_QUEUE_COS2BW_CFG UINT32_C(0x3a)
- /* Experimental */
#define HWRM_QUEUE_DSCP_QCAPS UINT32_C(0x3b)
- /* Experimental */
#define HWRM_QUEUE_DSCP2PRI_QCFG UINT32_C(0x3c)
- /* Experimental */
#define HWRM_QUEUE_DSCP2PRI_CFG UINT32_C(0x3d)
#define HWRM_VNIC_ALLOC UINT32_C(0x40)
#define HWRM_VNIC_FREE UINT32_C(0x41)
#define HWRM_RESERVED6 UINT32_C(0x65)
#define HWRM_VNIC_RSS_COS_LB_CTX_ALLOC UINT32_C(0x70)
#define HWRM_VNIC_RSS_COS_LB_CTX_FREE UINT32_C(0x71)
+ #define HWRM_QUEUE_MPLS_QCAPS UINT32_C(0x80)
+ #define HWRM_QUEUE_MPLSTC2PRI_QCFG UINT32_C(0x81)
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG UINT32_C(0x82)
#define HWRM_CFA_L2_FILTER_ALLOC UINT32_C(0x90)
#define HWRM_CFA_L2_FILTER_FREE UINT32_C(0x91)
#define HWRM_CFA_L2_FILTER_CFG UINT32_C(0x92)
#define HWRM_PORT_QSTATS_EXT UINT32_C(0xb4)
#define HWRM_PORT_PHY_MDIO_WRITE UINT32_C(0xb5)
#define HWRM_PORT_PHY_MDIO_READ UINT32_C(0xb6)
+ #define HWRM_PORT_PHY_MDIO_BUS_ACQUIRE UINT32_C(0xb7)
+ #define HWRM_PORT_PHY_MDIO_BUS_RELEASE UINT32_C(0xb8)
#define HWRM_FW_RESET UINT32_C(0xc0)
#define HWRM_FW_QSTATUS UINT32_C(0xc1)
#define HWRM_FW_HEALTH_CHECK UINT32_C(0xc2)
#define HWRM_FW_SYNC UINT32_C(0xc3)
- #define HWRM_FW_STATE_BUFFER_QCAPS UINT32_C(0xc4)
+ #define HWRM_FW_STATE_QCAPS UINT32_C(0xc4)
#define HWRM_FW_STATE_QUIESCE UINT32_C(0xc5)
#define HWRM_FW_STATE_BACKUP UINT32_C(0xc6)
#define HWRM_FW_STATE_RESTORE UINT32_C(0xc7)
#define HWRM_OEM_CMD UINT32_C(0xd4)
/* Tells the fw to run PRBS test on a given port and lane. */
#define HWRM_PORT_PRBS_TEST UINT32_C(0xd5)
+ #define HWRM_PORT_SFP_SIDEBAND_CFG UINT32_C(0xd6)
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG UINT32_C(0xd7)
+ #define HWRM_FW_STATE_UNQUIESCE UINT32_C(0xd8)
+ /* Tells the fw to collect dsc dump on a given port and lane. */
+ #define HWRM_PORT_DSC_DUMP UINT32_C(0xd9)
#define HWRM_TEMP_MONITOR_QUERY UINT32_C(0xe0)
+ #define HWRM_REG_POWER_QUERY UINT32_C(0xe1)
+ #define HWRM_CORE_FREQUENCY_QUERY UINT32_C(0xe2)
#define HWRM_WOL_FILTER_ALLOC UINT32_C(0xf0)
#define HWRM_WOL_FILTER_FREE UINT32_C(0xf1)
#define HWRM_WOL_FILTER_QCFG UINT32_C(0xf2)
#define HWRM_ENGINE_STATS_CLEAR UINT32_C(0x156)
/* Engine - Query the statistics accumulator for an Engine. */
#define HWRM_ENGINE_STATS_QUERY UINT32_C(0x157)
+ /* Engine - Query statistics counters for continuous errors from all CDDIP Engines. */
+ #define HWRM_ENGINE_STATS_QUERY_CONTINUOUS_ERROR UINT32_C(0x158)
/* Engine - Allocate an Engine RQ. */
#define HWRM_ENGINE_RQ_ALLOC UINT32_C(0x15e)
/* Engine - Free an Engine RQ. */
#define HWRM_NVM_RAW_WRITE_BLK UINT32_C(0xffff)
#define HWRM_LAST HWRM_NVM_RAW_WRITE_BLK
uint16_t unused_0[3];
-} __attribute__((packed));
+} __rte_packed;
/* Return Codes */
/* ret_codes (size:64b/8B) */
#define HWRM_ERR_CODE_HOT_RESET_FAIL UINT32_C(0xb)
/*
* This error code is only reported by the firmware when during
- * flow allocation when a requeest for a flow counter fails because
+ * flow allocation when a request for a flow counter fails because
* the number of flow counters are exhausted.
*/
#define HWRM_ERR_CODE_NO_FLOW_COUNTER_DURING_ALLOC UINT32_C(0xc)
* internal error.
*/
#define HWRM_ERR_CODE_HWRM_ERROR UINT32_C(0xf)
+ /*
+ * Firmware is unable to service the request at the present time. Caller
+ * may try again later.
+ */
+ #define HWRM_ERR_CODE_BUSY UINT32_C(0x10)
/*
* This value indicates that the HWRM response is in TLV format and
* should be interpreted as one or more TLVs starting with the
- * hwrm_resp_hdr TLV. This value is not an indicatation of any error
- * by itself, just an indicatation that the response should be parsed
+ * hwrm_resp_hdr TLV. This value is not an indication of any error
+ * by itself, just an indication that the response should be parsed
* as TLV and the actual error code will be in the hwrm_resp_hdr TLV.
*/
#define HWRM_ERR_CODE_TLV_ENCAPSULATED_RESPONSE UINT32_C(0x8000)
#define HWRM_ERR_CODE_LAST \
HWRM_ERR_CODE_CMD_NOT_SUPPORTED
uint16_t unused_0[3];
-} __attribute__((packed));
+} __rte_packed;
/* Output */
/* hwrm_err_output (size:128b/16B) */
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*
* Following is the signature for HWRM message field that indicates not
* applicable (All F's). Need to cast it the size of the field if needed.
#define HWRM_TARGET_ID_TOOLS 0xFFFD
#define HWRM_VERSION_MAJOR 1
#define HWRM_VERSION_MINOR 10
-#define HWRM_VERSION_UPDATE 0
+#define HWRM_VERSION_UPDATE 1
/* non-zero means beta version */
-#define HWRM_VERSION_RSVD 91
-#define HWRM_VERSION_STR "1.10.0.91"
+#define HWRM_VERSION_RSVD 6
+#define HWRM_VERSION_STR "1.10.1.6"
/****************
* hwrm_ver_get *
*/
uint8_t hwrm_intf_upd;
uint8_t unused_0[5];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_ver_get_output (size:1408b/176B) */
struct hwrm_ver_get_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* bd_base (size:64b/8B) */
struct bd_base {
#define BD_BASE_TYPE_TX_BD_SHORT UINT32_C(0x0)
/*
* Indicates that this BD is 1BB long and is an empty
- * TX BD. Not valid for use by the driver.
+ * TX BD. Not valid for use by the driver.
*/
#define BD_BASE_TYPE_TX_BD_EMPTY UINT32_C(0x1)
/*
* Indicates that this BD is 16B long and is an RX Producer
- * (ie. empty) buffer descriptor.
+ * (i.e. empty) buffer descriptor.
*/
#define BD_BASE_TYPE_RX_PROD_PKT UINT32_C(0x4)
/*
#define BD_BASE_TYPE_TX_BD_LONG_INLINE UINT32_C(0x11)
#define BD_BASE_TYPE_LAST BD_BASE_TYPE_TX_BD_LONG_INLINE
uint8_t unused_1[7];
-} __attribute__((packed));
+} __rte_packed;
/* tx_bd_short (size:128b/16B) */
struct tx_bd_short {
#define TX_BD_SHORT_FLAGS_SFT 6
/*
* If set to 1, the packet ends with the data in the buffer
- * pointed to by this descriptor. This flag must be
+ * pointed to by this descriptor. This flag must be
* valid on every BD.
*/
#define TX_BD_SHORT_FLAGS_PACKET_END UINT32_C(0x40)
* This value indicates how many 16B BD locations are consumed
* in the ring by this packet.
* A value of 1 indicates that this BD is the only BD (and that
- * the it is a short BD). A value
+ * it is a short BD). A value
* of 3 indicates either 3 short BDs or 1 long BD and one short
- * BD in the packet. A value of 0 indicates
+ * BD in the packet. A value of 0 indicates
* that there are 32 BD locations in the packet (the maximum).
*
* This field is valid only on the first BD of a packet.
* This value must be valid on all BDs of a packet.
*/
uint64_t address;
-} __attribute__((packed));
+} __rte_packed;
/* tx_bd_long (size:128b/16B) */
struct tx_bd_long {
#define TX_BD_LONG_FLAGS_SFT 6
/*
* If set to 1, the packet ends with the data in the buffer
- * pointed to by this descriptor. This flag must be
+ * pointed to by this descriptor. This flag must be
* valid on every BD.
*/
#define TX_BD_LONG_FLAGS_PACKET_END UINT32_C(0x40)
* This value indicates how many 16B BD locations are consumed
* in the ring by this packet.
* A value of 1 indicates that this BD is the only BD (and that
- * the it is a short BD). A value
+ * it is a short BD). A value
* of 3 indicates either 3 short BDs or 1 long BD and one short
- * BD in the packet. A value of 0 indicates
+ * BD in the packet. A value of 0 indicates
* that there are 32 BD locations in the packet (the maximum).
*
* This field is valid only on the first BD of a packet.
* This value must be valid on all BDs of a packet.
*/
uint64_t address;
-} __attribute__((packed));
+} __rte_packed;
/* Last 16 bytes of tx_bd_long. */
/* tx_bd_long_hi (size:128b/16B) */
*/
#define TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM UINT32_C(0x1)
/*
- * If set to 1, the controller replaces the IP checksum of the
+ * If set to 1, the controller replaces the IP checksum of the
* normal packets, or the inner IP checksum of the encapsulated
* packets with the hardware calculated IP checksum for the
* packet associated with this descriptor.
*
* This bit must be valid on the first BD of a packet.
*
- * Packet must be 64B or longer when this flag is set. It is not
+ * Packet must be 64B or longer when this flag is set. It is not
* useful to use this bit with any form of TX offload such as
- * CSO or LSO. The intent is that the packet from the host already
+ * CSO or LSO. The intent is that the packet from the host already
* has a valid Ethernet CRC on the packet.
*/
#define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4)
*/
#define TX_BD_LONG_LFLAGS_T_IP_CHKSUM UINT32_C(0x10)
/*
- * If set to 1, the device will treat this packet with LSO(Large
+ * If set to 1, the device will treat this packet with LSO(Large
* Send Offload) processing for both normal or encapsulated
- * packets, which is a form of TCP segmentation. When this bit
+ * packets, which is a form of TCP segmentation. When this bit
* is 1, the hdr_size and mss fields must be valid. The driver
* doesn't need to set t_ip_chksum, ip_chksum, and tcp_udp_chksum
* flags since the controller will replace the appropriate
#define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80)
/*
* If set to '1', then the RoCE ICRC will be appended to the
- * packet. Packet must be a valid RoCE format packet.
+ * packet. Packet must be a valid RoCE format packet.
*/
#define TX_BD_LONG_LFLAGS_ROCE_CRC UINT32_C(0x100)
/*
* If set to '1', then the FCoE CRC will be appended to the
- * packet. Packet must be a valid FCoE format packet.
+ * packet. Packet must be a valid FCoE format packet.
*/
#define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200)
uint16_t hdr_size;
/*
* When LSO is '1', this field must contain the offset of the
* TCP payload from the beginning of the packet in as
- * 16b words. In case of encapsulated/tunneling packet, this field
+ * 16b words. In case of encapsulated/tunneling packet, this field
* contains the offset of the inner TCP payload from beginning of the
* packet as 16-bit words.
*
#define TX_BD_LONG_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28)
#define TX_BD_LONG_CFA_META_KEY_LAST \
TX_BD_LONG_CFA_META_KEY_VLAN_TAG
-} __attribute__((packed));
+} __rte_packed;
/*
* This structure is used to inform the NIC of packet data that needs to be
#define TX_BD_LONG_INLINE_FLAGS_SFT 6
/*
* If set to 1, the packet ends with the data in the buffer
- * pointed to by this descriptor. This flag must be
+ * pointed to by this descriptor. This flag must be
* valid on every BD.
*/
#define TX_BD_LONG_INLINE_FLAGS_PACKET_END UINT32_C(0x40)
#define TX_BD_LONG_INLINE_LFLAGS_T_IPID UINT32_C(0x80)
/*
* If set to '1', then the RoCE ICRC will be appended to the
- * packet. Packet must be a valid RoCE format packet.
+ * packet. Packet must be a valid RoCE format packet.
*/
#define TX_BD_LONG_INLINE_LFLAGS_ROCE_CRC UINT32_C(0x100)
/*
* If set to '1', then the FCoE CRC will be appended to the
- * packet. Packet must be a valid FCoE format packet.
+ * packet. Packet must be a valid FCoE format packet.
*/
#define TX_BD_LONG_INLINE_LFLAGS_FCOE_CRC UINT32_C(0x200)
uint16_t unused2;
(UINT32_C(0x1) << 28)
#define TX_BD_LONG_INLINE_CFA_META_KEY_LAST \
TX_BD_LONG_INLINE_CFA_META_KEY_VLAN_TAG
-} __attribute__((packed));
+} __rte_packed;
/* tx_bd_empty (size:128b/16B) */
struct tx_bd_empty {
#define TX_BD_EMPTY_TYPE_SFT 0
/*
* Indicates that this BD is 1BB long and is an empty
- * TX BD. Not valid for use by the driver.
+ * TX BD. Not valid for use by the driver.
*/
#define TX_BD_EMPTY_TYPE_TX_BD_EMPTY UINT32_C(0x1)
#define TX_BD_EMPTY_TYPE_LAST TX_BD_EMPTY_TYPE_TX_BD_EMPTY
uint8_t unused_2;
uint8_t unused_3[3];
uint8_t unused_4[8];
-} __attribute__((packed));
+} __rte_packed;
/* rx_prod_pkt_bd (size:128b/16B) */
struct rx_prod_pkt_bd {
#define RX_PROD_PKT_BD_TYPE_SFT 0
/*
* Indicates that this BD is 16B long and is an RX Producer
- * (ie. empty) buffer descriptor.
+ * (i.e. empty) buffer descriptor.
*/
#define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT UINT32_C(0x4)
#define RX_PROD_PKT_BD_TYPE_LAST \
#define RX_PROD_PKT_BD_FLAGS_SFT 6
/*
* If set to 1, the packet will be placed at the address plus
- * 2B. The 2 Bytes of padding will be written as zero.
+ * 2B. The 2 Bytes of padding will be written as zero.
*/
#define RX_PROD_PKT_BD_FLAGS_SOP_PAD UINT32_C(0x40)
/*
#define RX_PROD_PKT_BD_FLAGS_EOP_PAD UINT32_C(0x80)
/*
* This value is the number of additional buffers in the ring that
- * describe the buffer space to be consumed for the this packet.
+ * describe the buffer space to be consumed for this packet.
* If the value is zero, then the packet must fit within the
- * space described by this BD. If this value is 1 or more, it
+ * space described by this BD. If this value is 1 or more, it
* indicates how many additional "buffer" BDs are in the ring
* immediately following this BD to be used for the same
* network packet.
uint32_t opaque;
/*
* This is the host physical address where data for the packet may
- * by placed in host memory.
+ * be placed in host memory.
*/
uint64_t address;
-} __attribute__((packed));
+} __rte_packed;
/* rx_prod_bfr_bd (size:128b/16B) */
struct rx_prod_bfr_bd {
uint32_t opaque;
/*
* This is the host physical address where data for the packet may
- * by placed in host memory.
+ * be placed in host memory.
*/
uint64_t address;
-} __attribute__((packed));
+} __rte_packed;
/* rx_prod_agg_bd (size:128b/16B) */
struct rx_prod_agg_bd {
uint32_t opaque;
/*
* This is the host physical address where data for the packet may
- * by placed in host memory.
+ * be placed in host memory.
*/
uint64_t address;
-} __attribute__((packed));
+} __rte_packed;
/* cmpl_base (size:128b/16B) */
struct cmpl_base {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define CMPL_BASE_TYPE_MASK UINT32_C(0x3f)
#define CMPL_BASE_TYPE_SFT 0
/*
* TX L2 completion:
- * Completion of TX packet. Length = 16B
+ * Completion of TX packet. Length = 16B
*/
#define CMPL_BASE_TYPE_TX_L2 UINT32_C(0x0)
/*
/*
* RX Aggregation Buffer completion :
* Completion of an L2 aggregation buffer in support of
- * TPA, HDS, or Jumbo packet completion. Length = 16B
+ * TPA, HDS, or Jumbo packet completion. Length = 16B
*/
#define CMPL_BASE_TYPE_RX_AGG UINT32_C(0x12)
/*
uint32_t info2;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
uint32_t info3_v;
#define CMPL_BASE_V UINT32_C(0x1)
#define CMPL_BASE_INFO3_SFT 1
/* info4 is 32 b */
uint32_t info4;
-} __attribute__((packed));
+} __rte_packed;
/* tx_cmpl (size:128b/16B) */
struct tx_cmpl {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define TX_CMPL_TYPE_MASK UINT32_C(0x3f)
#define TX_CMPL_TYPE_SFT 0
/*
* TX L2 completion:
- * Completion of TX packet. Length = 16B
+ * Completion of TX packet. Length = 16B
*/
#define TX_CMPL_TYPE_TX_L2 UINT32_C(0x0)
#define TX_CMPL_TYPE_LAST TX_CMPL_TYPE_TX_L2
#define TX_CMPL_FLAGS_SFT 6
/*
* When this bit is '1', it indicates a packet that has an
- * error of some type. Type of error is indicated in
+ * error of some type. Type of error is indicated in
* error_flags.
*/
#define TX_CMPL_FLAGS_ERROR UINT32_C(0x40)
/*
* When this bit is '1', it indicates that the packet completed
* was transmitted using the push acceleration data provided
- * by the driver. When this bit is '0', it indicates that the
+ * by the driver. When this bit is '0', it indicates that the
* packet had not push acceleration data written or was executed
* as a normal packet even though push data was provided.
*/
uint16_t errors_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define TX_CMPL_V UINT32_C(0x1)
#define TX_CMPL_ERRORS_MASK UINT32_C(0xfffe)
TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT
/*
* When this bit is '1', it indicates that the length of
- * the packet was zero. No packet was transmitted.
+ * the packet was zero. No packet was transmitted.
*/
#define TX_CMPL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10)
/*
#define TX_CMPL_ERRORS_DMA_ERROR UINT32_C(0x40)
/*
* When this bit is '1', it indicates that the packet was longer
- * than indicated by the hint. No packet was transmitted.
+ * than indicated by the hint. No packet was transmitted.
*/
#define TX_CMPL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80)
/*
uint16_t unused_1;
/* unused3 is 32 b */
uint32_t unused_2;
-} __attribute__((packed));
+} __rte_packed;
/* rx_pkt_cmpl (size:128b/16B) */
struct rx_pkt_cmpl {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define RX_PKT_CMPL_TYPE_MASK UINT32_C(0x3f)
#define RX_PKT_CMPL_FLAGS_SFT 6
/*
* When this bit is '1', it indicates a packet that has an
- * error of some type. Type of error is indicated in
+ * error of some type. Type of error is indicated in
* error_flags.
*/
#define RX_PKT_CMPL_FLAGS_ERROR UINT32_C(0x40)
RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
/*
* This is the length of the data for the packet stored in the
- * buffer(s) identified by the opaque value. This includes
- * the packet BD and any associated buffer BDs. This does not include
- * the the length of any data places in aggregation BDs.
+ * buffer(s) identified by the opaque value. This includes
+ * the packet BD and any associated buffer BDs. This does not include
+ * the length of any data places in aggregation BDs.
*/
uint16_t len;
/*
uint8_t agg_bufs_v1;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_PKT_CMPL_V1 UINT32_C(0x1)
/*
#define RX_PKT_CMPL_UNUSED1_MASK UINT32_C(0xc0)
#define RX_PKT_CMPL_UNUSED1_SFT 6
/*
- * This is the RSS hash type for the packet. The value is packed
+ * This is the RSS hash type for the packet. The value is packed
* {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
*
* The value of tuple_extrac_op provides the information about
uint8_t rss_hash_type;
/*
* This value indicates the offset in bytes from the beginning of the packet
- * where the inner payload starts. This value is valid for TCP, UDP,
+ * where the inner payload starts. This value is valid for TCP, UDP,
* FCoE, and RoCE packets.
*
* A value of zero indicates that header is 256B into the packet.
* based on the mode bits and key value in the VNIC.
*/
uint32_t rss_hash;
-} __attribute__((packed));
+} __rte_packed;
/* Last 16 bytes of rx_pkt_cmpl. */
/* rx_pkt_cmpl_hi (size:128b/16B) */
/* This value indicates what format the metadata field is. */
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_SFT 4
- /* No metadata informtaion. Value is zero. */
+ /* No metadata information. Value is zero. */
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_NONE \
(UINT32_C(0x0) << 4)
/*
* - VXLAN = VNI[23:0] -> VXLAN Network ID
* - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier.
* - NVGRE = TNI[23:0] -> Tenant Network ID
- * - GRE = KEY[31:0 -> key fieled with bit mask. zero if K = 0
+ * - GRE = KEY[31:0] -> key field with bit mask. zero if K = 0
* - IPV4 = 0 (not populated)
* - IPV6 = Flow Label[19:0]
* - PPPoE = sessionID[15:0]
RX_PKT_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET
/*
* This field indicates the IP type for the inner-most IP header.
- * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
* This value is only valid if itype indicates a packet
* with an IP header.
*/
uint16_t errors_v2;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_PKT_CMPL_V2 \
UINT32_C(0x1)
/*
* This error indicates that there was some sort of problem with
* the BDs for the packet that was found after part of the
- * packet was already placed. The packet should be treated as
+ * packet was already placed. The packet should be treated as
* invalid.
*/
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_MASK \
* Did Not Fit:
* Packet did not fit into packet buffer provided.
* For regular placement, this means the packet did not fit
- * in the buffer provided. For HDS and jumbo placement, this
+ * in the buffer provided. For HDS and jumbo placement, this
* means that the packet could not be placed into 7 physical
* buffers or less.
*/
UINT32_C(0x80)
/*
* This indicates that there was a CRC error on either an FCoE
- * or RoCE packet. The itype indicates the packet type.
+ * or RoCE packet. The itype indicates the packet type.
*/
#define RX_PKT_CMPL_ERRORS_CRC_ERROR \
UINT32_C(0x100)
* This value holds the reordering sequence number for the packet.
* If the reordering sequence is not valid, then this value is zero.
* The reordering domain for the packet is in the bottom 8 to 10b of
- * the rss_hash value. The bottom 20b of this value contain the
+ * the rss_hash value. The bottom 20b of this value contain the
* ordering domain value for the packet.
*/
#define RX_PKT_CMPL_REORDER_MASK UINT32_C(0xffffff)
#define RX_PKT_CMPL_REORDER_SFT 0
-} __attribute__((packed));
+} __rte_packed;
/*
* This TPA completion structure is used on devices where the
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define RX_TPA_START_CMPL_TYPE_MASK UINT32_C(0x3f)
#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT 7
/*
* Jumbo:
- * TPA Packet was placed using jumbo algorithm. This means
+ * TPA Packet was placed using jumbo algorithm. This means
* that the first buffer will be filled with data before
- * moving to aggregation buffers. Each aggregation buffer
+ * moving to aggregation buffers. Each aggregation buffer
* will be filled before moving to the next aggregation
* buffer.
*/
uint32_t opaque;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
uint8_t v1;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_TPA_START_CMPL_V1 UINT32_C(0x1)
#define RX_TPA_START_CMPL_LAST RX_TPA_START_CMPL_V1
/*
- * This is the RSS hash type for the packet. The value is packed
+ * This is the RSS hash type for the packet. The value is packed
* {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
*
* The value of tuple_extrac_op provides the information about
uint8_t rss_hash_type;
/*
* This is the aggregation ID that the completion is associated
- * with. Use this number to correlate the TPA start completion
+ * with. Use this number to correlate the TPA start completion
* with the TPA end completion.
*/
uint16_t agg_id;
#define RX_TPA_START_CMPL_UNUSED2_SFT 0
/*
* This is the aggregation ID that the completion is associated
- * with. Use this number to correlate the TPA start completion
+ * with. Use this number to correlate the TPA start completion
* with the TPA end completion.
*/
#define RX_TPA_START_CMPL_AGG_ID_MASK UINT32_C(0xfe00)
* based on the mode bits and key value in the VNIC.
*/
uint32_t rss_hash;
-} __attribute__((packed));
+} __rte_packed;
/*
* Last 16 bytes of rx_tpa_start_cmpl.
/* This value indicates what format the metadata field is. */
#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4
- /* No metadata information. Value is zero. */
+ /* No metadata information. Value is zero. */
#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE \
(UINT32_C(0x0) << 4)
/*
RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN
/*
* This field indicates the IP type for the inner-most IP header.
- * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
*/
#define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100)
/*
uint16_t v2;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_TPA_START_CMPL_V2 UINT32_C(0x1)
/*
uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset;
/*
* This is the offset from the beginning of the packet in bytes for
- * the outer L3 header. If there is no outer L3 header, then this
+ * the outer L3 header. If there is no outer L3 header, then this
* value is zero.
*/
#define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff)
*/
#define RX_TPA_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000)
#define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT 27
-} __attribute__((packed));
+} __rte_packed;
/*
* This TPA completion structure is used on devices where the
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define RX_TPA_END_CMPL_TYPE_MASK UINT32_C(0x3f)
#define RX_TPA_END_CMPL_FLAGS_SFT 6
/*
* When this bit is '1', it indicates a packet that has an
- * error of some type. Type of error is indicated in
+ * error of some type. Type of error is indicated in
* error_flags.
*/
#define RX_TPA_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT 7
/*
* Jumbo:
- * TPA Packet was placed using jumbo algorithm. This means
+ * TPA Packet was placed using jumbo algorithm. This means
* that the first buffer will be filled with data before
- * moving to aggregation buffers. Each aggregation buffer
+ * moving to aggregation buffers. Each aggregation buffer
* will be filled before moving to the next aggregation
* buffer.
*/
* This value indicates what the inner packet determined for the
* packet was.
* - 2 TCP Packet
- * Indicates that the packet was IP and TCP. This indicates
+ * Indicates that the packet was IP and TCP. This indicates
* that the ip_cs field is valid and that the tcp_udp_cs
* field is valid and contains the TCP checksum.
* This also indicates that the payload_offset field is valid.
uint32_t opaque;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
uint8_t agg_bufs_v1;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_TPA_END_CMPL_V1 UINT32_C(0x1)
/*
uint8_t tpa_segs;
/*
* This value indicates the offset in bytes from the beginning of the packet
- * where the inner payload starts. This value is valid for TCP, UDP,
+ * where the inner payload starts. This value is valid for TCP, UDP,
* FCoE, and RoCE packets.
*
* A value of zero indicates an offset of 256 bytes.
#define RX_TPA_END_CMPL_UNUSED2 UINT32_C(0x1)
/*
* This is the aggregation ID that the completion is associated
- * with. Use this number to correlate the TPA start completion
+ * with. Use this number to correlate the TPA start completion
* with the TPA end completion.
*/
#define RX_TPA_END_CMPL_AGG_ID_MASK UINT32_C(0xfe)
* For GRO packets, this field is zero except for the following
* sub-fields.
* - tsdelta[31]
- * Timestamp present indication. When '0', no Timestamp
- * option is in the packet. When '1', then a Timestamp
+ * Timestamp present indication. When '0', no Timestamp
+ * option is in the packet. When '1', then a Timestamp
* option is present in the packet.
*/
uint32_t tsdelta;
-} __attribute__((packed));
+} __rte_packed;
/*
* Last 16 bytes of rx_tpa_end_cmpl.
#define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf)
#define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0
/*
- * This value is the valid when TPA completion is active. It
+ * This value is the valid when TPA completion is active. It
* indicates the length of the longest segment of the TPA operation
* for LRO mode and the length of the first segment in GRO mode.
*
* This value may be used by GRO software to re-construct the original
- * packet stream from the TPA packet. This is the length of all
- * but the last segment for GRO. In LRO mode this value may be used
+ * packet stream from the TPA packet. This is the length of all
+ * but the last segment for GRO. In LRO mode this value may be used
* to indicate MSS size to the stack.
*/
uint16_t tpa_seg_len;
uint16_t errors_v2;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_TPA_END_CMPL_V2 UINT32_C(0x1)
#define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe)
/*
* This error indicates that there was some sort of problem with
* the BDs for the packet that was found after part of the
- * packet was already placed. The packet should be treated as
+ * packet was already placed. The packet should be treated as
* invalid.
*/
#define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
#define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1
/*
* This error occurs when there is a fatal HW problem in
- * the chip only. It indicates that there were not
+ * the chip only. It indicates that there were not
* BDs on chip but that there was adequate reservation.
* provided by the TPA block.
*/
/*
* This error occurs when TPA block was not configured to
* reserve adequate BDs for TPA operations on this RX
- * ring. All data for the TPA operation was not placed.
+ * ring. All data for the TPA operation was not placed.
*
* This error can also be generated when the number of
* segments is not programmed correctly in TPA and the
* completion that corresponds to this TPA end completion.
*/
uint32_t start_opaque;
-} __attribute__((packed));
+} __rte_packed;
/*
* This TPA completion structure is used on devices where the
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define RX_TPA_V2_START_CMPL_TYPE_MASK \
#define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_SFT 7
/*
* Jumbo:
- * TPA Packet was placed using jumbo algorithm. This means
+ * TPA Packet was placed using jumbo algorithm. This means
* that the first buffer will be filled with data before
- * moving to aggregation buffers. Each aggregation buffer
+ * moving to aggregation buffers. Each aggregation buffer
* will be filled before moving to the next aggregation
* buffer.
*/
uint32_t opaque;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
uint8_t v1;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_TPA_V2_START_CMPL_V1 UINT32_C(0x1)
#define RX_TPA_V2_START_CMPL_LAST RX_TPA_V2_START_CMPL_V1
/*
- * This is the RSS hash type for the packet. The value is packed
+ * This is the RSS hash type for the packet. The value is packed
* {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}.
*
* The value of tuple_extrac_op provides the information about
uint8_t rss_hash_type;
/*
* This is the aggregation ID that the completion is associated
- * with. Use this number to correlate the TPA start completion
+ * with. Use this number to correlate the TPA start completion
* with the TPA end completion.
*/
uint16_t agg_id;
* based on the mode bits and key value in the VNIC.
*/
uint32_t rss_hash;
-} __attribute__((packed));
+} __rte_packed;
/*
* Last 16 bytes of rx_tpa_v2_start_cmpl.
#define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_MASK \
UINT32_C(0xf0)
#define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_SFT 4
- /* No metadata informtaion. Value is zero. */
+ /* No metadata informtaion. Value is zero. */
#define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_NONE \
(UINT32_C(0x0) << 4)
/*
RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET
/*
* This field indicates the IP type for the inner-most IP header.
- * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
+ * A value of '0' indicates IPv4. A value of '1' indicates IPv6.
*/
#define RX_TPA_V2_START_CMPL_FLAGS2_IP_TYPE \
UINT32_C(0x100)
uint16_t errors_v2;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_TPA_V2_START_CMPL_V2 \
UINT32_C(0x1)
/*
* This error indicates that there was some sort of problem with
* the BDs for the packet that was found after part of the
- * packet was already placed. The packet should be treated as
+ * packet was already placed. The packet should be treated as
* invalid.
*/
#define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_MASK \
uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset;
/*
* This is the offset from the beginning of the packet in bytes for
- * the outer L3 header. If there is no outer L3 header, then this
+ * the outer L3 header. If there is no outer L3 header, then this
* value is zero.
*/
#define RX_TPA_V2_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff)
*/
#define RX_TPA_V2_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000)
#define RX_TPA_V2_START_CMPL_INNER_L4_SIZE_SFT 27
-} __attribute__((packed));
+} __rte_packed;
/*
* This TPA completion structure is used on devices where the
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define RX_TPA_V2_END_CMPL_TYPE_MASK UINT32_C(0x3f)
#define RX_TPA_V2_END_CMPL_FLAGS_SFT 6
/*
* When this bit is '1', it indicates a packet that has an
- * error of some type. Type of error is indicated in
+ * error of some type. Type of error is indicated in
* error_flags.
*/
#define RX_TPA_V2_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
#define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7
/*
* Jumbo:
- * TPA Packet was placed using jumbo algorithm. This means
+ * TPA Packet was placed using jumbo algorithm. This means
* that the first buffer will be filled with data before
- * moving to aggregation buffers. Each aggregation buffer
+ * moving to aggregation buffers. Each aggregation buffer
* will be filled before moving to the next aggregation
* buffer.
*/
* This value indicates what the inner packet determined for the
* packet was.
* - 2 TCP Packet
- * Indicates that the packet was IP and TCP. This indicates
+ * Indicates that the packet was IP and TCP. This indicates
* that the ip_cs field is valid and that the tcp_udp_cs
* field is valid and contains the TCP checksum.
* This also indicates that the payload_offset field is valid.
uint8_t v1;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_TPA_V2_END_CMPL_V1 UINT32_C(0x1)
/* This value is the number of segments in the TPA operation. */
uint8_t tpa_segs;
/*
* This is the aggregation ID that the completion is associated
- * with. Use this number to correlate the TPA start completion
+ * with. Use this number to correlate the TPA start completion
* with the TPA end completion.
*/
uint16_t agg_id;
* For GRO packets, this field is zero except for the following
* sub-fields.
* - tsdelta[31]
- * Timestamp present indication. When '0', no Timestamp
- * option is in the packet. When '1', then a Timestamp
+ * Timestamp present indication. When '0', no Timestamp
+ * option is in the packet. When '1', then a Timestamp
* option is present in the packet.
*/
uint32_t tsdelta;
-} __attribute__((packed));
+} __rte_packed;
/*
* Last 16 bytes of rx_tpa_v2_end_cmpl.
*/
uint8_t tpa_agg_bufs;
/*
- * This value is the valid when TPA completion is active. It
+ * This value is the valid when TPA completion is active. It
* indicates the length of the longest segment of the TPA operation
* for LRO mode and the length of the first segment in GRO mode.
*
* This value may be used by GRO software to re-construct the original
- * packet stream from the TPA packet. This is the length of all
- * but the last segment for GRO. In LRO mode this value may be used
+ * packet stream from the TPA packet. This is the length of all
+ * but the last segment for GRO. In LRO mode this value may be used
* to indicate MSS size to the stack.
*/
uint16_t tpa_seg_len;
uint16_t errors_v2;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_TPA_V2_END_CMPL_V2 UINT32_C(0x1)
#define RX_TPA_V2_END_CMPL_ERRORS_MASK \
/*
* This error indicates that there was some sort of problem with
* the BDs for the packet that was found after part of the
- * packet was already placed. The packet should be treated as
+ * packet was already placed. The packet should be treated as
* invalid.
*/
#define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_MASK \
(UINT32_C(0x0) << 1)
/*
* This error occurs when there is a fatal HW problem in
- * the chip only. It indicates that there were not
+ * the chip only. It indicates that there were not
* BDs on chip but that there was adequate reservation.
* provided by the TPA block.
*/
/*
* This error occurs when TPA block was not configured to
* reserve adequate BDs for TPA operations on this RX
- * ring. All data for the TPA operation was not placed.
+ * ring. All data for the TPA operation was not placed.
*
* This error can also be generated when the number of
* segments is not programmed correctly in TPA and the
* completion that corresponds to this TPA end completion.
*/
uint32_t start_opaque;
-} __attribute__((packed));
+} __rte_packed;
/*
* This TPA completion structure is used on devices where the
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define RX_TPA_V2_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f)
/*
* RX TPA Aggregation Buffer completion :
* Completion of an L2 aggregation buffer in support of
- * TPA packet completion. Length = 16B
+ * TPA packet completion. Length = 16B
*/
#define RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG UINT32_C(0x16)
#define RX_TPA_V2_ABUF_CMPL_TYPE_LAST \
RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG
/*
* This is the length of the data for the packet stored in this
- * aggregation buffer identified by the opaque value. This does not
+ * aggregation buffer identified by the opaque value. This does not
* include the length of any
* data placed in other aggregation BDs or in the packet or buffer
- * BDs. This length does not include any space added due to
+ * BDs. This length does not include any space added due to
* hdr_offset register during HDS placement mode.
*/
uint16_t len;
uint16_t v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_TPA_V2_ABUF_CMPL_V UINT32_C(0x1)
/*
*/
uint16_t agg_id;
uint32_t unused_1;
-} __attribute__((packed));
+} __rte_packed;
/* rx_abuf_cmpl (size:128b/16B) */
struct rx_abuf_cmpl {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define RX_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f)
/*
* RX Aggregation Buffer completion :
* Completion of an L2 aggregation buffer in support of
- * TPA, HDS, or Jumbo packet completion. Length = 16B
+ * TPA, HDS, or Jumbo packet completion. Length = 16B
*/
#define RX_ABUF_CMPL_TYPE_RX_AGG UINT32_C(0x12)
#define RX_ABUF_CMPL_TYPE_LAST RX_ABUF_CMPL_TYPE_RX_AGG
/*
* This is the length of the data for the packet stored in this
- * aggregation buffer identified by the opaque value. This does not
+ * aggregation buffer identified by the opaque value. This does not
* include the length of any
* data placed in other aggregation BDs or in the packet or buffer
- * BDs. This length does not include any space added due to
+ * BDs. This length does not include any space added due to
* hdr_offset register during HDS placement mode.
*/
uint16_t len;
uint32_t v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define RX_ABUF_CMPL_V UINT32_C(0x1)
/* unused3 is 32 b */
uint32_t unused_2;
-} __attribute__((packed));
+} __rte_packed;
/* eject_cmpl (size:128b/16B) */
struct eject_cmpl {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define EJECT_CMPL_TYPE_MASK UINT32_C(0x3f)
#define EJECT_CMPL_FLAGS_SFT 6
/*
* When this bit is '1', it indicates a packet that has an
- * error of some type. Type of error is indicated in
+ * error of some type. Type of error is indicated in
* error_flags.
*/
#define EJECT_CMPL_FLAGS_ERROR UINT32_C(0x40)
uint16_t v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define EJECT_CMPL_V UINT32_C(0x1)
#define EJECT_CMPL_ERRORS_MASK UINT32_C(0xfffe)
uint16_t reserved16;
/* unused3 is 32 b */
uint32_t unused_2;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cmpl (size:128b/16B) */
struct hwrm_cmpl {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_CMPL_TYPE_MASK UINT32_C(0x3f)
uint32_t v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_CMPL_V UINT32_C(0x1)
/* unused4 is 32 b */
uint32_t unused_3;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_fwd_req_cmpl (size:128b/16B) */
struct hwrm_fwd_req_cmpl {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
uint16_t req_len_type;
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_FWD_REQ_CMPL_TYPE_MASK UINT32_C(0x3f)
uint32_t req_buf_addr_v[2];
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_FWD_REQ_CMPL_V UINT32_C(0x1)
/* Address of forwarded request. */
#define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_MASK UINT32_C(0xfffffffe)
#define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT 1
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_fwd_resp_cmpl (size:128b/16B) */
struct hwrm_fwd_resp_cmpl {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_FWD_RESP_CMPL_TYPE_MASK UINT32_C(0x3f)
uint32_t resp_buf_addr_v[2];
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_FWD_RESP_CMPL_V UINT32_C(0x1)
/* Address of forwarded request. */
#define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_MASK UINT32_C(0xfffffffe)
#define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_SFT 1
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl (size:128b/16B) */
struct hwrm_async_event_cmpl {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f)
/* TFLIB unique link status changed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TFLIB_LINK_STATUS_CHANGE \
UINT32_C(0x3e)
+ /*
+ * An event signifying completion for HWRM_FW_STATE_QUIESCE
+ * (completion, timeout, or error)
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_QUIESCE_DONE \
+ UINT32_C(0x3f)
/*
* A trace log message. This contains firmware trace logs string
* embedded in the asynchronous message. This is an experimental
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_V UINT32_C(0x1)
/* opaque is 7 b */
uint16_t timestamp_hi;
/* Event specific data */
uint32_t event_data1;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_link_status_change (size:128b/16B) */
struct hwrm_async_event_cmpl_link_status_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_V \
UINT32_C(0x1)
UINT32_C(0xff00000)
#define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PF_ID_SFT \
20
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_link_mtu_change (size:128b/16B) */
struct hwrm_async_event_cmpl_link_mtu_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_MASK \
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_SFT 0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_link_speed_change (size:128b/16B) */
struct hwrm_async_event_cmpl_link_speed_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_V \
UINT32_C(0x1)
UINT32_C(0xffff0000)
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_SFT \
16
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_dcb_config_change (size:128b/16B) */
struct hwrm_async_event_cmpl_dcb_config_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_V \
UINT32_C(0x1)
(UINT32_C(0xff) << 24)
#define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_LAST \
HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_port_conn_not_allowed (size:128b/16B) */
struct hwrm_async_event_cmpl_port_conn_not_allowed {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_V \
UINT32_C(0x1)
(UINT32_C(0x3) << 16)
#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_LAST \
HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_link_speed_cfg_not_allowed (size:128b/16B) */
struct hwrm_async_event_cmpl_link_speed_cfg_not_allowed {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_V \
UINT32_C(0x1)
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \
0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_link_speed_cfg_change (size:128b/16B) */
struct hwrm_async_event_cmpl_link_speed_cfg_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_V \
UINT32_C(0x1)
*/
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_ILLEGAL_LINK_SPEED_CFG \
UINT32_C(0x20000)
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_port_phy_cfg_change (size:128b/16B) */
struct hwrm_async_event_cmpl_port_phy_cfg_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_V \
UINT32_C(0x1)
*/
#define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PAUSE_CFG_CHANGE \
UINT32_C(0x40000)
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_reset_notify (size:128b/16B) */
struct hwrm_async_event_cmpl_reset_notify {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_V UINT32_C(0x1)
/* opaque is 7 b */
UINT32_C(0xffff0000)
#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_DATA1_DELAY_IN_100MS_TICKS_SFT \
16
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_error_recovery (size:128b/16B) */
struct hwrm_async_event_cmpl_error_recovery {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_V UINT32_C(0x1)
/* opaque is 7 b */
*/
#define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_EVENT_DATA1_FLAGS_RECOVERY_ENABLED \
UINT32_C(0x2)
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */
struct hwrm_async_event_cmpl_func_drvr_unload {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_V UINT32_C(0x1)
/* opaque is 7 b */
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT \
0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_func_drvr_load (size:128b/16B) */
struct hwrm_async_event_cmpl_func_drvr_load {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_func_flr_proc_cmplt (size:128b/16B) */
struct hwrm_async_event_cmpl_func_flr_proc_cmplt {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_V \
UINT32_C(0x1)
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_SFT \
0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_pf_drvr_unload (size:128b/16B) */
struct hwrm_async_event_cmpl_pf_drvr_unload {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_MASK \
UINT32_C(0x70000)
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_SFT 16
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_pf_drvr_load (size:128b/16B) */
struct hwrm_async_event_cmpl_pf_drvr_load {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_MASK \
UINT32_C(0x70000)
#define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_SFT 16
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_vf_flr (size:128b/16B) */
struct hwrm_async_event_cmpl_vf_flr {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_MASK \
UINT32_C(0xff0000)
#define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_SFT 16
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_vf_mac_addr_change (size:128b/16B) */
struct hwrm_async_event_cmpl_vf_mac_addr_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_V \
UINT32_C(0x1)
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_SFT \
0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_pf_vf_comm_status_change (size:128b/16B) */
struct hwrm_async_event_cmpl_pf_vf_comm_status_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_V \
UINT32_C(0x1)
*/
#define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_DATA1_COMM_ESTABLISHED \
UINT32_C(0x1)
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_vf_cfg_change (size:128b/16B) */
struct hwrm_async_event_cmpl_vf_cfg_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V UINT32_C(0x1)
/* opaque is 7 b */
*/
#define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_TRUSTED_VF_CFG_CHANGE \
UINT32_C(0x10)
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_llfc_pfc_change (size:128b/16B) */
struct hwrm_async_event_cmpl_llfc_pfc_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_V UINT32_C(0x1)
/* opaque is 7 b */
UINT32_C(0x1fffe0)
#define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_SFT \
5
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_default_vnic_change (size:128b/16B) */
struct hwrm_async_event_cmpl_default_vnic_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_MASK \
6
/* Identifiers of events. */
uint16_t event_id;
- /* Notification of a default vnic allocaiton or free */
+ /* Notification of a default vnic allocation or free */
#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION \
UINT32_C(0x35)
#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_LAST \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_V \
UINT32_C(0x1)
UINT32_C(0x3fffc00)
#define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_SFT \
10
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_hw_flow_aged (size:128b/16B) */
struct hwrm_async_event_cmpl_hw_flow_aged {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_V UINT32_C(0x1)
/* opaque is 7 b */
(UINT32_C(0x1) << 31)
#define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_LAST \
HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_EVENT_DATA1_FLOW_DIRECTION_TX
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_eem_cache_flush_req (size:128b/16B) */
struct hwrm_async_event_cmpl_eem_cache_flush_req {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_V \
UINT32_C(0x1)
uint16_t timestamp_hi;
/* Event specific data */
uint32_t event_data1;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_eem_cache_flush_done (size:128b/16B) */
struct hwrm_async_event_cmpl_eem_cache_flush_done {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_V \
UINT32_C(0x1)
UINT32_C(0xffff)
#define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_EVENT_DATA1_FID_SFT \
0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_tcp_flag_action_change (size:128b/16B) */
struct hwrm_async_event_cmpl_tcp_flag_action_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_V \
UINT32_C(0x1)
uint16_t timestamp_hi;
/* Event specific data */
uint32_t event_data1;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_eem_flow_active (size:128b/16B) */
struct hwrm_async_event_cmpl_eem_flow_active {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_V UINT32_C(0x1)
/* opaque is 7 b */
(UINT32_C(0x1) << 31)
#define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_LAST \
HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_EVENT_DATA1_MODE_1
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_eem_cfg_change (size:128b/16B) */
struct hwrm_async_event_cmpl_eem_cfg_change {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_V UINT32_C(0x1)
/* opaque is 7 b */
*/
#define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_EVENT_DATA1_EEM_RX_ENABLE \
UINT32_C(0x2)
-} __attribute__((packed));
+} __rte_packed;
+
+/* hwrm_async_event_cmpl_quiesce_done (size:128b/16B) */
+struct hwrm_async_event_cmpl_quiesce_done {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* An event signifying completion of HWRM_FW_STATE_QUIESCE */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_QUIESCE_DONE \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_QUIESCE_DONE
+ /* Event specific data */
+ uint32_t event_data2;
+ /* Status of HWRM_FW_STATE_QUIESCE completion */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_SFT \
+ 0
+ /*
+ * The quiesce operation started by HWRM_FW_STATE_QUIESCE
+ * completed successfully.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_SUCCESS \
+ UINT32_C(0x0)
+ /*
+ * The quiesce operation started by HWRM_FW_STATE_QUIESCE timed
+ * out.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_TIMEOUT \
+ UINT32_C(0x1)
+ /*
+ * The quiesce operation started by HWRM_FW_STATE_QUIESCE
+ * encountered an error.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_ERROR \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_LAST \
+ HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_ERROR
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_OPAQUE_MASK UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /* Event specific data */
+ uint32_t event_data1;
+ /* Time stamp for error event */
+ #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA1_TIMESTAMP \
+ UINT32_C(0x1)
+} __rte_packed;
/* hwrm_async_event_cmpl_fw_trace_msg (size:128b/16B) */
struct hwrm_async_event_cmpl_fw_trace_msg {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE9_MASK \
UINT32_C(0xff000000)
#define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_EVENT_DATA1_BYTE9_SFT 24
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */
struct hwrm_async_event_cmpl_hwrm_error {
/*
* This field indicates the exact type of the completion.
* By convention, the LSB identifies the length of the
- * record in 16B units. Even values indicate 16B
- * records. Odd values indicate 32B
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
* records.
*/
#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \
uint8_t opaque_v;
/*
* This value is written by the NIC such that it will be different
- * for each pass through the completion queue. The even passes
- * will write 1. The odd passes will write 0.
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1)
/* opaque is 7 b */
/* Time stamp for error event */
#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \
UINT32_C(0x1)
-} __attribute__((packed));
+} __rte_packed;
/*******************
* hwrm_func_reset *
#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_LAST \
HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF
uint8_t unused_0;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_reset_output (size:128b/16B) */
struct hwrm_func_reset_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************
* hwrm_func_getfid *
*/
uint16_t pci_id;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_getfid_output (size:128b/16B) */
struct hwrm_func_getfid_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_func_vf_alloc *
uint16_t first_vf_id;
/* The number of virtual functions requested. */
uint16_t num_vfs;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_alloc_output (size:128b/16B) */
struct hwrm_func_vf_alloc_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_func_vf_free *
* 0xFFFF - Cleanup all children of this PF.
*/
uint16_t num_vfs;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_free_output (size:128b/16B) */
struct hwrm_func_vf_free_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************
* hwrm_func_vf_cfg *
/* The number of HW ring groups requested for the VF. */
uint16_t num_hw_ring_grps;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_cfg_output (size:128b/16B) */
struct hwrm_func_vf_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************
* hwrm_func_qcaps *
*/
uint16_t fid;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_qcaps_output (size:640b/80B) */
struct hwrm_func_qcaps_output {
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ERR_RECOVER_RELOAD \
UINT32_C(0x2000000)
+ /*
+ * If the query is for a VF, then this flag (always set to 0) shall
+ * be ignored. If this query is for a PF and this flag is set to 1,
+ * host, when registered for the default vnic change async event,
+ * receives async notification whenever a default vnic state is
+ * changed for any of child or adopted VFs.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_NOTIFY_VF_DEF_VNIC_CHNG_SUPPORTED \
+ UINT32_C(0x4000000)
/*
* This value is current MAC address configured for this
* function. A value of 00-00-00-00-00-00 indicates no
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************
* hwrm_func_qcfg *
*/
uint16_t fid;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_qcfg_output (size:704b/88B) */
struct hwrm_func_qcfg_output {
* after receiving the RESET Notify event.
*/
uint32_t reset_addr_poll;
- uint8_t unused_2[3];
+ /*
+ * This field specifies legacy L2 doorbell size in KBytes. Drivers should use
+ * this value to find out the doorbell page offset from the BAR.
+ */
+ uint16_t legacy_l2_db_size_kb;
+ uint8_t unused_2[1];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************
* hwrm_func_cfg *
* be reserved for this function on the RX side.
*/
uint16_t num_mcast_filters;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_cfg_output (size:128b/16B) */
struct hwrm_func_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************
* hwrm_func_qstats *
* Function ID of the function that is being queried.
* 0xFF... (All Fs) if the query is for the requesting
* function.
+ * A privileged PF can query for other function's statistics.
*/
uint16_t fid;
- uint8_t unused_0[6];
-} __attribute__((packed));
+ /* This flags indicates the type of statistics request. */
+ uint8_t flags;
+ /* This value is not used to avoid backward compatibility issues. */
+ #define HWRM_FUNC_QSTATS_INPUT_FLAGS_UNUSED UINT32_C(0x0)
+ /*
+ * flags should be set to 1 when request is for only RoCE statistics.
+ * This will be honored only if the caller_fid is a privileged PF.
+ * In all other cases FID and caller_fid should be the same.
+ */
+ #define HWRM_FUNC_QSTATS_INPUT_FLAGS_ROCE_ONLY UINT32_C(0x1)
+ #define HWRM_FUNC_QSTATS_INPUT_FLAGS_LAST \
+ HWRM_FUNC_QSTATS_INPUT_FLAGS_ROCE_ONLY
+ uint8_t unused_0[5];
+} __rte_packed;
/* hwrm_func_qstats_output (size:1408b/176B) */
struct hwrm_func_qstats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_func_clr_stats *
*/
uint16_t fid;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_clr_stats_output (size:128b/16B) */
struct hwrm_func_clr_stats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_func_vf_resc_free *
*/
uint16_t vf_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_resc_free_output (size:128b/16B) */
struct hwrm_func_vf_resc_free_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_func_drv_rgtr *
UINT32_C(0x20)
/*
* When this bit is 1, the function is indicating the support of the
- * Master capability. The Firmware will use this capability to select
- * the Master function. The master function will be used to initiate
- * designated functionality like error recovery etc. If none of the
- * registered PFs or trusted VFs indicate this support, then
- * firmware will select the 1st registered PF as Master capable
- * instance.
+ * Master capability. The Firmware will use this capability to select the
+ * Master function. The master function will be used to initiate
+ * designated functionality like error recovery etc… If none of the
+ * registered PF’s or trusted VF’s indicate this support, then
+ * firmware will select the 1st registered PF as Master capable instance.
*/
#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_MASTER_SUPPORT \
UINT32_C(0x40)
uint16_t ver_upd;
/* This is the 16bit patch version of the driver. */
uint16_t ver_patch;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_drv_rgtr_output (size:128b/16B) */
struct hwrm_func_drv_rgtr_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/************************
* hwrm_func_drv_unrgtr *
#define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \
UINT32_C(0x1)
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_drv_unrgtr_output (size:128b/16B) */
struct hwrm_func_drv_unrgtr_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_func_buf_rgtr *
* HWRM.
*/
uint64_t resp_buf_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_buf_rgtr_output (size:128b/16B) */
struct hwrm_func_buf_rgtr_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/************************
* hwrm_func_buf_unrgtr *
*/
uint16_t vf_id;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_buf_unrgtr_output (size:128b/16B) */
struct hwrm_func_buf_unrgtr_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_func_drv_qver *
*/
uint16_t fid;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_drv_qver_output (size:256b/32B) */
struct hwrm_func_drv_qver_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_func_resource_qcaps *
*/
uint16_t fid;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_resource_qcaps_output (size:448b/56B) */
struct hwrm_func_resource_qcaps_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************************
* hwrm_func_backing_store_qcaps *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
-/* hwrm_func_backing_store_qcaps_output (size:576b/72B) */
+/* hwrm_func_backing_store_qcaps_output (size:640b/80B) */
struct hwrm_func_backing_store_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
* limitations.
*/
uint8_t tqm_entries_multiple;
+ /*
+ * Initializer to be used by drivers
+ * to initialize context memory to ensure
+ * context subsystem flags an error for an attack
+ * before the first time context load.
+ */
+ uint8_t ctx_kind_initializer;
+ /* Reserved for future. */
+ uint32_t rsvd;
+ /* Reserved for future. */
+ uint16_t rsvd1;
+ /* Reserved for future. */
+ uint8_t rsvd2;
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_func_backing_store_cfg *
uint16_t mrav_entry_size;
/* Number of bytes that have been allocated for each context entry. */
uint16_t tim_entry_size;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_backing_store_cfg_output (size:128b/16B) */
struct hwrm_func_backing_store_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************************
* hwrm_func_backing_store_qcfg *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_backing_store_qcfg_output (size:1920b/240B) */
struct hwrm_func_backing_store_qcfg_output {
* is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_error_recovery_qcfg *
*/
uint64_t resp_addr;
uint8_t unused_0[8];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_error_recovery_qcfg_output (size:1664b/208B) */
struct hwrm_error_recovery_qcfg_output {
* is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_func_vlan_qcfg *
*/
uint16_t fid;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vlan_qcfg_output (size:320b/40B) */
struct hwrm_func_vlan_qcfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_func_vlan_cfg *
/* Future use. */
uint32_t rsvd2;
uint8_t unused_3[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vlan_cfg_output (size:128b/16B) */
struct hwrm_func_vlan_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_func_vf_vnic_ids_query *
uint32_t max_vnic_id_cnt;
/* This is the address for VF VNIC ID table */
uint64_t vnic_id_tbl_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_vnic_ids_query_output (size:128b/16B) */
struct hwrm_func_vf_vnic_ids_query_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_func_vf_bw_cfg *
(UINT32_C(0xf) << 12)
#define HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_LAST \
HWRM_FUNC_VF_BW_CFG_INPUT_VFN_RATE_PCT_100
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_bw_cfg_output (size:128b/16B) */
struct hwrm_func_vf_bw_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/************************
* hwrm_func_vf_bw_qcfg *
/* The physical VF id of interest */
#define HWRM_FUNC_VF_BW_QCFG_INPUT_VFN_VFID_MASK UINT32_C(0xfff)
#define HWRM_FUNC_VF_BW_QCFG_INPUT_VFN_VFID_SFT 0
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_vf_bw_qcfg_output (size:960b/120B) */
struct hwrm_func_vf_bw_qcfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_func_drv_if_change *
*/
#define HWRM_FUNC_DRV_IF_CHANGE_INPUT_FLAGS_UP UINT32_C(0x1)
uint32_t unused;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_drv_if_change_output (size:128b/16B) */
struct hwrm_func_drv_if_change_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_func_host_pf_ids_query *
#define HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_LAST \
HWRM_FUNC_HOST_PF_IDS_QUERY_INPUT_FILTER_ROCE
uint8_t unused_1[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_func_host_pf_ids_query_output (size:128b/16B) */
struct hwrm_func_host_pf_ids_query_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_port_phy_cfg *
#define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2)
/*
* The HW will be configured with external loopback such that
- * host data is sent on the trasmitter and based on the external
+ * host data is sent on the transmitter and based on the external
* loopback connection the data will be received without modification.
*/
#define HWRM_PORT_PHY_CFG_INPUT_LPBK_EXTERNAL UINT32_C(0x3)
UINT32_C(0x40)
uint8_t unused_2[2];
/*
- * Reuested setting of TX LPI timer in microseconds.
+ * Requested setting of TX LPI timer in microseconds.
* This field is valid only when EEE is enabled and TX LPI is
* enabled.
*/
#define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
#define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0
uint32_t unused_3;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_phy_cfg_output (size:128b/16B) */
struct hwrm_port_phy_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_phy_cfg_cmd_err (size:64b/8B) */
struct hwrm_port_phy_cfg_cmd_err {
#define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_LAST \
HWRM_PORT_PHY_CFG_CMD_ERR_CODE_RETRY
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_port_phy_qcfg *
/* Port ID of port that is to be queried. */
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_phy_qcfg_output (size:768b/96B) */
struct hwrm_port_phy_qcfg_output {
#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
/*
* The HW will be configured with external loopback such that
- * host data is sent on the trasmitter and based on the external
+ * host data is sent on the transmitter and based on the external
* loopback connection the data will be received without modification.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_EXTERNAL UINT32_C(0x3)
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_port_mac_cfg *
#define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_ENABLE \
UINT32_C(0x100)
/*
- * When this bit is '1', the the Out-Of-Box WoL is requested to
+ * When this bit is '1', the Out-Of-Box WoL is requested to
* be disabled on this port.
*/
#define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_DISABLE \
* This field shall be ignored if the ptp_tx_ts_capture_enable
* flag is not set in this command.
* Otherwise, if bit 'i' is set, then the HWRM is being
- * requested to configure the transmit sied of the port to
+ * requested to configure the transmit side of the port to
* capture the time stamp of every transmitted PTP message
* with messageType field value set to i.
*/
*/
int32_t ptp_freq_adj_ppb;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_mac_cfg_output (size:128b/16B) */
struct hwrm_port_mac_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_port_mac_qcfg *
/* Port ID of port that is to be configured. */
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_mac_qcfg_output (size:192b/24B) */
struct hwrm_port_mac_qcfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_port_mac_ptp_qcfg *
/* Port ID of port that is being queried. */
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_mac_ptp_qcfg_output (size:640b/80B) */
struct hwrm_port_mac_ptp_qcfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* Port Tx Statistics Formats */
/* tx_port_stats (size:3264b/408B) */
uint64_t tx_stat_discard;
/* Total Tx Error Drops per Port reported by STATS block */
uint64_t tx_stat_error;
-} __attribute__((packed));
+} __rte_packed;
/* Port Rx Statistics Formats */
/* rx_port_stats (size:4224b/528B) */
/* Total Rx Discards per Port reported by STATS block */
uint64_t rx_stat_discard;
uint64_t rx_stat_err;
-} __attribute__((packed));
+} __rte_packed;
/********************
* hwrm_port_qstats *
* Rx port statistics will be stored
*/
uint64_t rx_stat_host_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_qstats_output (size:128b/16B) */
struct hwrm_port_qstats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* Port Tx Statistics extended Formats */
/* tx_port_stats_ext (size:2048b/256B) */
uint64_t pfc_pri7_tx_duration_us;
/* Number of times, a XON -> XOFF and XOFF -> XON transitions occur for priority 7 */
uint64_t pfc_pri7_tx_transitions;
-} __attribute__((packed));
+} __rte_packed;
/* Port Rx Statistics extended Formats */
/* rx_port_stats_ext (size:3648b/456B) */
uint64_t rx_discard_packets_cos6;
/* Total number of rx discard packets count on cos queue 7 */
uint64_t rx_discard_packets_cos7;
-} __attribute__((packed));
+} __rte_packed;
/************************
* hwrm_port_qstats_ext *
* Rx port statistics will be stored
*/
uint64_t rx_stat_host_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_qstats_ext_output (size:128b/16B) */
struct hwrm_port_qstats_ext_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_port_lpbk_qstats *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_lpbk_qstats_output (size:768b/96B) */
struct hwrm_port_lpbk_qstats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_port_clr_stats *
*/
#define HWRM_PORT_CLR_STATS_INPUT_FLAGS_ROCE_COUNTERS UINT32_C(0x1)
uint8_t unused_0[5];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_clr_stats_output (size:128b/16B) */
struct hwrm_port_clr_stats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_port_phy_qcaps *
/* Port ID of port that is being queried. */
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_phy_qcaps_output (size:192b/24B) */
struct hwrm_port_phy_qcaps_output {
*/
#define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EXTERNAL_LPBK_SUPPORTED \
UINT32_C(0x2)
+ /*
+ * If set to 1, then this field indicates that the
+ * PHY is capable of supporting loopback in autoneg mode.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_AUTONEG_LPBK_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * Indicates if the configuration of shared PHY settings is supported.
+ * In cases where a physical port is shared by multiple functions
+ * (e.g. NPAR, multihost, etc), the configuration of PHY
+ * settings may not be allowed. Callers to HWRM_PORT_PHY_CFG will
+ * get an HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED error in this case.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_SHARED_PHY_CFG_SUPPORTED \
+ UINT32_C(0x8)
/*
* Reserved field. The HWRM shall set this field to 0.
* An HWRM client shall ignore this field.
*/
#define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_MASK \
- UINT32_C(0xfc)
- #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT 2
+ UINT32_C(0xf0)
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT 4
/* Number of front panel ports for this device. */
uint8_t port_cnt;
/* Not supported or unknown */
#define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_MASK \
UINT32_C(0xff000000)
#define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT 24
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_port_phy_mdio_write *
uint8_t cl45_mdio;
/* */
uint8_t unused_1[7];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_phy_mdio_write_output (size:128b/16B) */
struct hwrm_port_phy_mdio_write_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_port_phy_mdio_read *
uint8_t cl45_mdio;
/* */
uint8_t unused_1;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_phy_mdio_read_output (size:128b/16B) */
struct hwrm_port_phy_mdio_read_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_port_led_cfg *
uint8_t led3_group_id;
/* Reserved field. */
uint8_t rsvd3;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_led_cfg_output (size:128b/16B) */
struct hwrm_port_led_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_port_led_qcfg *
/* Port ID of port whose LED configuration is being queried. */
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_led_qcfg_output (size:448b/56B) */
struct hwrm_port_led_qcfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_port_led_qcaps *
/* Port ID of port whose LED configuration is being queried. */
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_led_qcaps_output (size:384b/48B) */
struct hwrm_port_led_qcaps_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_port_prbs_test *
* bit1 = lane1 ..bit31 = lane31
*/
uint32_t rx_lane_map;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_prbs_test_output (size:128b/16B) */
struct hwrm_port_prbs_test_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
+
+/**********************
+ * hwrm_port_dsc_dump *
+ **********************/
+
+
+/* hwrm_port_dsc_dump_input (size:320b/40B) */
+struct hwrm_port_dsc_dump_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Host address where response diagnostic data is returned. */
+ uint64_t resp_data_addr;
+ /*
+ * Size of the buffer pointed to by resp_data_addr. The firmware
+ * may use this entire buffer or less than the entire buffer, but
+ * never more.
+ */
+ uint16_t data_len;
+ uint16_t unused_0;
+ uint32_t unused_1;
+ /* Port ID of port where dsc dump to be collected. */
+ uint16_t port_id;
+ /* Diag level specified by the user */
+ uint16_t diag_level;
+ /* SRDS_DIAG_LANE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_LANE \
+ UINT32_C(0x0)
+ /* SRDS_DIAG_CORE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_CORE \
+ UINT32_C(0x1)
+ /* SRDS_DIAG_EVENT */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EVENT \
+ UINT32_C(0x2)
+ /* SRDS_DIAG_EYE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EYE \
+ UINT32_C(0x3)
+ /* SRDS_DIAG_REG_CORE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_REG_CORE \
+ UINT32_C(0x4)
+ /* SRDS_DIAG_REG_LANE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_REG_LANE \
+ UINT32_C(0x5)
+ /* SRDS_DIAG_UC_CORE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_UC_CORE \
+ UINT32_C(0x6)
+ /* SRDS_DIAG_UC_LANE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_UC_LANE \
+ UINT32_C(0x7)
+ /* SRDS_DIAG_LANE_DEBUG */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_LANE_DEBUG \
+ UINT32_C(0x8)
+ /* SRDS_DIAG_BER_VERT */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_BER_VERT \
+ UINT32_C(0x9)
+ /* SRDS_DIAG_BER_HORZ */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_BER_HORZ \
+ UINT32_C(0xa)
+ /* SRDS_DIAG_EVENT_SAFE */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EVENT_SAFE \
+ UINT32_C(0xb)
+ /* SRDS_DIAG_TIMESTAMP */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_TIMESTAMP \
+ UINT32_C(0xc)
+ #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_LAST \
+ HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_TIMESTAMP
+ /*
+ * This field is a lane number
+ * on which to collect the dsc dump
+ */
+ uint16_t lane_number;
+ /*
+ * Configuration bits.
+ * Use enable bit to start dsc dump or retrieve dump
+ */
+ uint16_t dsc_dump_config;
+ /*
+ * Set 0 to retrieve the dsc dump
+ * Set 1 to start the dsc dump
+ */
+ #define HWRM_PORT_DSC_DUMP_INPUT_DSC_DUMP_CONFIG_START_RETRIEVE \
+ UINT32_C(0x1)
+} __rte_packed;
+
+/* hwrm_port_dsc_dump_output (size:128b/16B) */
+struct hwrm_port_dsc_dump_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Total length of stored data. */
+ uint16_t total_data_len;
+ uint16_t unused_0;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************************
+ * hwrm_port_sfp_sideband_cfg *
+ ******************************/
+
+
+/* hwrm_port_sfp_sideband_cfg_input (size:256b/32B) */
+struct hwrm_port_sfp_sideband_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is to be queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+ /*
+ * This bitfield is used to specify which bits from the 'flags'
+ * fields are being configured by the caller.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for rs0 to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RS0 \
+ UINT32_C(0x1)
+ /* This bit must be '1' for rs1 to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RS1 \
+ UINT32_C(0x2)
+ /* This bit must be '1' for tx_disable to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_TX_DIS \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for mod_sel to be configured.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_MOD_SEL \
+ UINT32_C(0x8)
+ /* This bit must be '1' for reset_l to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RESET_L \
+ UINT32_C(0x10)
+ /* This bit must be '1' for lp_mode to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_LP_MODE \
+ UINT32_C(0x20)
+ /* This bit must be '1' for pwr_disable to be configured. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_PWR_DIS \
+ UINT32_C(0x40)
+ /*
+ * Only bits that have corresponding bits in the 'enables'
+ * bitfield are processed by the firmware, all other bits
+ * of 'flags' are ignored.
+ */
+ uint32_t flags;
+ /*
+ * This bit along with rs1 configures the current speed of the dual
+ * rate module. If these pins are GNDed then the speed can be changed
+ * by driectly writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RS0 \
+ UINT32_C(0x1)
+ /*
+ * This bit along with rs0 configures the current speed of the dual
+ * rate module. If these pins are GNDed then the speed can be changed
+ * by driectly writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RS1 \
+ UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', tx_disable is set.
+ * On a 1G BASE-T module, if this bit is set,
+ * module PHY registers will not be accessible.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_TX_DIS \
+ UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', this module is selected.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_MOD_SEL \
+ UINT32_C(0x8)
+ /*
+ * If reset_l is set to 0, Module will be taken out of reset
+ * and other signals will be set to their requested state once
+ * the module is out of reset.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RESET_L \
+ UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', the module will be configured
+ * in low power mode.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_LP_MODE \
+ UINT32_C(0x20)
+ /* When this bit is set to '1', the module will be powered down. */
+ #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_PWR_DIS \
+ UINT32_C(0x40)
+} __rte_packed;
+
+/* hwrm_port_sfp_sideband_cfg_output (size:128b/16B) */
+struct hwrm_port_sfp_sideband_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written. When
+ * writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************************
+ * hwrm_port_sfp_sideband_qcfg *
+ *******************************/
+
+
+/* hwrm_port_sfp_sideband_qcfg_input (size:192b/24B) */
+struct hwrm_port_sfp_sideband_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of port that is to be queried. */
+ uint16_t port_id;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_port_sfp_sideband_qcfg_output (size:192b/24B) */
+struct hwrm_port_sfp_sideband_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Bitmask indicating which sideband signals are valid.
+ * This is based on the board and nvm cfg that is present on the board.
+ */
+ uint32_t supported_mask;
+ uint32_t sideband_signals;
+ /* When this bit is set to '1', the Module is absent. */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_MOD_ABS \
+ UINT32_C(0x1)
+ /*
+ * When this bit is set to '1', there is no valid signal on RX.
+ * This signal is a filtered version of Signal Detect.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RX_LOS \
+ UINT32_C(0x2)
+ /*
+ * This bit along with rs1 indiactes the current speed of the dual
+ * rate module.If these pins are grounded then the speed can be
+ * changed by driectky writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RS0 \
+ UINT32_C(0x4)
+ /*
+ * This bit along with rs0 indiactes the current speed of the dual
+ * rate module.If these pins are grounded then the speed can be
+ * changed by driectky writing to EEPROM.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RS1 \
+ UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', tx_disable is set.
+ * On a 1G BASE-T module, if this bit is set, module PHY
+ * registers will not be accessible.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_TX_DIS \
+ UINT32_C(0x10)
+ /* When this bit is set to '1', tx_fault is set. */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_TX_FAULT \
+ UINT32_C(0x20)
+ /*
+ * When this bit is set to '1', module is selected.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_MOD_SEL \
+ UINT32_C(0x40)
+ /*
+ * When this bit is set to '0', the module is held in reset.
+ * if reset_l is set to 1,first module is taken out of reset
+ * and other signals will be set to their requested state.
+ * Valid only on QSFP modules.
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RESET_L \
+ UINT32_C(0x80)
+ /*
+ * When this bit is set to '1', the module is in low power mode.
+ * Valid only on QSFP modules
+ */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_LP_MODE \
+ UINT32_C(0x100)
+ /* When this bit is set to '1', module is in power down state. */
+ #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_PWR_DIS \
+ UINT32_C(0x200)
+ uint8_t unused[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written. When
+ * writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************************
+ * hwrm_port_phy_mdio_bus_acquire *
+ **********************************/
+
+
+/* hwrm_port_phy_mdio_bus_acquire_input (size:192b/24B) */
+struct hwrm_port_phy_mdio_bus_acquire_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of the port. */
+ uint16_t port_id;
+ /*
+ * client_id of the client requesting BUS access.
+ * Any value from 0x10 to 0xFFFF can be used.
+ * Client should make sure that the returned client_id
+ * in response matches the client_id in request.
+ * 0-0xF are reserved for internal use.
+ */
+ uint16_t client_id;
+ /*
+ * Timeout in milli seconds, MDIO BUS will be released automatically
+ * after this time, if another mdio acquire command is not received
+ * within the timeout window from the same client.
+ * A 0xFFFF will hold the bus until this bus is released.
+ */
+ uint16_t mdio_bus_timeout;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_port_phy_mdio_bus_acquire_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_bus_acquire_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t unused_0;
+ /*
+ * client_id of the module holding the BUS.
+ * 0-0xF are reserved for internal use.
+ */
+ uint16_t client_id;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************************
+ * hwrm_port_phy_mdio_bus_release *
+ **********************************/
+
+
+/* hwrm_port_phy_mdio_bus_release_input (size:192b/24B) */
+struct hwrm_port_phy_mdio_bus_release_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Port ID of the port. */
+ uint16_t port_id;
+ /*
+ * client_id of the client requesting BUS release.
+ * A client should not release any other clients BUS.
+ */
+ uint16_t client_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_port_phy_mdio_bus_release_output (size:128b/16B) */
+struct hwrm_port_phy_mdio_bus_release_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint16_t unused_0;
+ /* The BUS is released if client_id matches the client_id in request. */
+ uint16_t clients_id;
+ uint8_t unused_1[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
/***********************
* hwrm_queue_qportcfg *
HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
/*
* Port ID of port for which the queue configuration is being
- * queried. This field is only required when sent by IPC.
+ * queried. This field is only required when sent by IPC.
*/
uint16_t port_id;
/*
#define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_LAST \
HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED
uint8_t unused_0;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_qportcfg_output (size:256b/32B) */
struct hwrm_queue_qportcfg_output {
HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************
* hwrm_queue_qcfg *
HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX
/* Queue ID of the queue. */
uint32_t queue_id;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_qcfg_output (size:128b/16B) */
struct hwrm_queue_qcfg_output {
/* The length of the response data in number of bytes. */
uint16_t resp_len;
/*
- * This value is a the estimate packet length used in the
+ * This value is the estimate packet length used in the
* TX arbiter.
*/
uint32_t queue_len;
uint8_t unused_0;
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************
* hwrm_queue_cfg *
#define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LAST \
HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_cfg_output (size:128b/16B) */
struct hwrm_queue_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************************
* hwrm_queue_pfcenable_qcfg *
*/
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_pfcenable_qcfg_output (size:128b/16B) */
struct hwrm_queue_pfcenable_qcfg_output {
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_queue_pfcenable_cfg *
/* If set to 1, then PFC is requested to be enabled on PRI 1. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI1_PFC_ENABLED \
UINT32_C(0x2)
- /* If set to 1, then PFC is requested to be enabled on PRI 2. */
+ /* If set to 1, then PFC is requested to be enabled on PRI 2. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI2_PFC_ENABLED \
UINT32_C(0x4)
- /* If set to 1, then PFC is requested to be enabled on PRI 3. */
+ /* If set to 1, then PFC is requested to be enabled on PRI 3. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI3_PFC_ENABLED \
UINT32_C(0x8)
- /* If set to 1, then PFC is requested to be enabled on PRI 4. */
+ /* If set to 1, then PFC is requested to be enabled on PRI 4. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI4_PFC_ENABLED \
UINT32_C(0x10)
- /* If set to 1, then PFC is requested to be enabled on PRI 5. */
+ /* If set to 1, then PFC is requested to be enabled on PRI 5. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI5_PFC_ENABLED \
UINT32_C(0x20)
- /* If set to 1, then PFC is requested to be enabled on PRI 6. */
+ /* If set to 1, then PFC is requested to be enabled on PRI 6. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI6_PFC_ENABLED \
UINT32_C(0x40)
- /* If set to 1, then PFC is requested to be enabled on PRI 7. */
+ /* If set to 1, then PFC is requested to be enabled on PRI 7. */
#define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI7_PFC_ENABLED \
UINT32_C(0x80)
/*
*/
uint16_t port_id;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_pfcenable_cfg_output (size:128b/16B) */
struct hwrm_queue_pfcenable_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_queue_pri2cos_qcfg *
HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX
/*
* When this bit is set to '0', the query is
- * for VLAN PRI field in tunnel headers.
+ * for PRI from tunnel headers.
* When this bit is set to '1', the query is
- * for VLAN PRI field in inner packet headers.
+ * for PRI from inner packet headers.
*/
#define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_IVLAN UINT32_C(0x2)
/*
*/
uint8_t port_id;
uint8_t unused_0[3];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_pri2cos_qcfg_output (size:192b/24B) */
struct hwrm_queue_pri2cos_qcfg_output {
/* The length of the response data in number of bytes. */
uint16_t resp_len;
/*
- * CoS Queue assigned to priority 0. This value can only
+ * CoS Queue assigned to priority 0. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri0_cos_queue_id;
/*
- * CoS Queue assigned to priority 1. This value can only
+ * CoS Queue assigned to priority 1. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri1_cos_queue_id;
/*
- * CoS Queue assigned to priority 2 This value can only
+ * CoS Queue assigned to priority 2. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri2_cos_queue_id;
/*
- * CoS Queue assigned to priority 3. This value can only
+ * CoS Queue assigned to priority 3. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri3_cos_queue_id;
/*
- * CoS Queue assigned to priority 4. This value can only
+ * CoS Queue assigned to priority 4. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri4_cos_queue_id;
/*
- * CoS Queue assigned to priority 5. This value can only
+ * CoS Queue assigned to priority 5. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri5_cos_queue_id;
/*
- * CoS Queue assigned to priority 6. This value can only
+ * CoS Queue assigned to priority 6. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
*/
uint8_t pri6_cos_queue_id;
/*
- * CoS Queue assigned to priority 7. This value can only
+ * CoS Queue assigned to priority 7. This value can only
* be changed before traffic has started.
* A value of 0xff indicates that no CoS queue is assigned to the
* specified priority.
uint8_t unused_0[6];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_queue_pri2cos_cfg *
HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR
/*
* When this bit is set to '0', the mapping is requested
- * for VLAN PRI field in tunnel headers.
+ * for PRI from tunnel headers.
* When this bit is set to '1', the mapping is requested
- * for VLAN PRI field in inner packet headers.
+ * for PRI from inner packet headers.
*/
#define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_IVLAN UINT32_C(0x4)
uint32_t enables;
*/
uint8_t port_id;
/*
- * CoS Queue assigned to priority 0. This value can only
+ * CoS Queue assigned to priority 0. This value can only
* be changed before traffic has started.
*/
uint8_t pri0_cos_queue_id;
/*
- * CoS Queue assigned to priority 1. This value can only
+ * CoS Queue assigned to priority 1. This value can only
* be changed before traffic has started.
*/
uint8_t pri1_cos_queue_id;
*/
uint8_t pri2_cos_queue_id;
/*
- * CoS Queue assigned to priority 3. This value can only
+ * CoS Queue assigned to priority 3. This value can only
* be changed before traffic has started.
*/
uint8_t pri3_cos_queue_id;
/*
- * CoS Queue assigned to priority 4. This value can only
+ * CoS Queue assigned to priority 4. This value can only
* be changed before traffic has started.
*/
uint8_t pri4_cos_queue_id;
/*
- * CoS Queue assigned to priority 5. This value can only
+ * CoS Queue assigned to priority 5. This value can only
* be changed before traffic has started.
*/
uint8_t pri5_cos_queue_id;
/*
- * CoS Queue assigned to priority 6. This value can only
+ * CoS Queue assigned to priority 6. This value can only
* be changed before traffic has started.
*/
uint8_t pri6_cos_queue_id;
/*
- * CoS Queue assigned to priority 7. This value can only
+ * CoS Queue assigned to priority 7. This value can only
* be changed before traffic has started.
*/
uint8_t pri7_cos_queue_id;
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_pri2cos_cfg_output (size:128b/16B) */
struct hwrm_queue_pri2cos_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_queue_cos2bw_qcfg *
*/
uint16_t port_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_cos2bw_qcfg_output (size:896b/112B) */
struct hwrm_queue_cos2bw_qcfg_output {
uint8_t unused_2[4];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_queue_cos2bw_cfg *
*/
uint8_t queue_id7_bw_weight;
uint8_t unused_1[5];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_queue_cos2bw_cfg_output (size:128b/16B) */
struct hwrm_queue_cos2bw_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*******************
- * hwrm_vnic_alloc *
- *******************/
+/*************************
+ * hwrm_queue_dscp_qcaps *
+ *************************/
-/* hwrm_vnic_alloc_input (size:192b/24B) */
-struct hwrm_vnic_alloc_input {
+/* hwrm_queue_dscp_qcaps_input (size:192b/24B) */
+struct hwrm_queue_dscp_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
/*
- * When this bit is '1', this VNIC is requested to
- * be the default VNIC for this function.
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
*/
- #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
- uint8_t unused_0[4];
-} __attribute__((packed));
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
-/* hwrm_vnic_alloc_output (size:128b/16B) */
-struct hwrm_vnic_alloc_output {
+/* hwrm_queue_dscp_qcaps_output (size:128b/16B) */
+struct hwrm_queue_dscp_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Logical vnic ID */
- uint32_t vnic_id;
- uint8_t unused_0[3];
+ /* The number of bits provided by the hardware for the DSCP value. */
+ uint8_t num_dscp_bits;
+ uint8_t unused_0;
+ /* Max number of DSCP-MASK-PRI entries supported. */
+ uint16_t max_entries;
+ uint8_t unused_1[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/******************
- * hwrm_vnic_free *
- ******************/
+/****************************
+ * hwrm_queue_dscp2pri_qcfg *
+ ****************************/
-/* hwrm_vnic_free_input (size:192b/24B) */
-struct hwrm_vnic_free_input {
+/* hwrm_queue_dscp2pri_qcfg_input (size:256b/32B) */
+struct hwrm_queue_dscp2pri_qcfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Logical vnic ID */
- uint32_t vnic_id;
- uint8_t unused_0[4];
-} __attribute__((packed));
+ /*
+ * This is the host address where the 24-bits DSCP-MASK-PRI
+ * tuple(s) will be copied to.
+ */
+ uint64_t dest_data_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0;
+ /* Size of the buffer pointed to by dest_data_addr. */
+ uint16_t dest_data_buffer_size;
+ uint8_t unused_1[4];
+} __rte_packed;
-/* hwrm_vnic_free_output (size:128b/16B) */
-struct hwrm_vnic_free_output {
+/* hwrm_queue_dscp2pri_qcfg_output (size:128b/16B) */
+struct hwrm_queue_dscp2pri_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /*
+ * A count of the number of DSCP-MASK-PRI tuple(s) pointed to
+ * by the dest_data_addr.
+ */
+ uint16_t entry_cnt;
+ /*
+ * This is the default PRI which un-initialized DSCP values are
+ * mapped to.
+ */
+ uint8_t default_pri;
+ uint8_t unused_0[4];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/*****************
- * hwrm_vnic_cfg *
- *****************/
+/***************************
+ * hwrm_queue_dscp2pri_cfg *
+ ***************************/
-/* hwrm_vnic_cfg_input (size:320b/40B) */
-struct hwrm_vnic_cfg_input {
+/* hwrm_queue_dscp2pri_cfg_input (size:320b/40B) */
+struct hwrm_queue_dscp2pri_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
/*
- * When this bit is '1', the VNIC is requested to
- * be the default VNIC for the function.
+ * This is the host address where the 24-bits DSCP-MASK-PRI tuple
+ * will be copied from.
*/
- #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT \
+ uint64_t src_data_addr;
+ uint32_t flags;
+ /* use_hw_default_pri is 1 b */
+ #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_FLAGS_USE_HW_DEFAULT_PRI \
UINT32_C(0x1)
- /*
- * When this bit is '1', the VNIC is being configured to
- * strip VLAN in the RX path.
- * If set to '0', then VLAN stripping is disabled on
- * this VNIC.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE \
- UINT32_C(0x2)
- /*
- * When this bit is '1', the VNIC is being configured to
- * buffer receive packets in the hardware until the host
- * posts new receive buffers.
- * If set to '0', then bd_stall is being configured to be
- * disabled on this VNIC.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE \
- UINT32_C(0x4)
- /*
- * When this bit is '1', the VNIC is being configured to
- * receive both RoCE and non-RoCE traffic.
- * If set to '0', then this VNIC is not configured to be
- * operating in dual VNIC mode.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
- UINT32_C(0x8)
- /*
- * When this flag is set to '1', the VNIC is requested to
- * be configured to receive only RoCE traffic.
- * If this flag is set to '0', then this flag shall be
- * ignored by the HWRM.
- * If roce_dual_vnic_mode flag is set to '1'
- * or roce_mirroring_capable_vnic_mode flag to 1,
- * then the HWRM client shall not set this flag to '1'.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
- UINT32_C(0x10)
- /*
- * When a VNIC uses one destination ring group for certain
- * application (e.g. Receive Flow Steering) where
- * exact match is used to direct packets to a VNIC with one
- * destination ring group only, there is no need to configure
- * RSS indirection table for that VNIC as only one destination
- * ring group is used.
- *
- * This flag is used to enable a mode where
- * RSS is enabled in the VNIC using a RSS context
- * for computing RSS hash but the RSS indirection table is
- * not configured using hwrm_vnic_rss_cfg.
- *
- * If this mode is enabled, then the driver should not program
- * RSS indirection table for the RSS context that is used for
- * computing RSS hash only.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE \
- UINT32_C(0x20)
- /*
- * When this bit is '1', the VNIC is being configured to
- * receive both RoCE and non-RoCE traffic, but forward only the
- * RoCE traffic further. Also, RoCE traffic can be mirrored to
- * L2 driver.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
- UINT32_C(0x40)
uint32_t enables;
/*
- * This bit must be '1' for the dflt_ring_grp field to be
+ * This bit must be '1' for the default_pri field to be
* configured.
*/
- #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP \
+ #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_ENABLES_DEFAULT_PRI \
UINT32_C(0x1)
/*
- * This bit must be '1' for the rss_rule field to be
- * configured.
- */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE \
- UINT32_C(0x2)
- /*
- * This bit must be '1' for the cos_rule field to be
- * configured.
- */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE \
- UINT32_C(0x4)
- /*
- * This bit must be '1' for the lb_rule field to be
- * configured.
- */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE \
- UINT32_C(0x8)
- /*
- * This bit must be '1' for the mru field to be
- * configured.
- */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU \
- UINT32_C(0x10)
- /*
- * This bit must be '1' for the default_rx_ring_id field to be
- * configured.
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure pri2cos mapping on this port.
*/
- #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_RX_RING_ID \
- UINT32_C(0x20)
+ uint8_t port_id;
/*
- * This bit must be '1' for the default_cmpl_ring_id field to be
- * configured.
+ * This is the default PRI which un-initialized DSCP values will be
+ * mapped to.
*/
- #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_CMPL_RING_ID \
- UINT32_C(0x40)
- /* Logical vnic ID */
- uint16_t vnic_id;
+ uint8_t default_pri;
/*
- * Default Completion ring for the VNIC. This ring will
- * be chosen if packet does not match any RSS rules and if
- * there is no COS rule.
+ * A count of the number of DSCP-MASK-PRI tuple(s) in the data pointed
+ * to by src_data_addr.
*/
- uint16_t dflt_ring_grp;
+ uint16_t entry_cnt;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_queue_dscp2pri_cfg_output (size:128b/16B) */
+struct hwrm_queue_dscp2pri_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
/*
- * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
- * there is no RSS rule.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- uint16_t rss_rule;
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_queue_mpls_qcaps *
+ *************************/
+
+
+/* hwrm_queue_mpls_qcaps_input (size:192b/24B) */
+struct hwrm_queue_mpls_qcaps_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
- * there is no COS rule.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- uint16_t cos_rule;
+ uint16_t cmpl_ring;
/*
- * RSS ID for load balancing rule/table structure.
- * 0xFF... (All Fs) if there is no LB rule.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- uint16_t lb_rule;
+ uint16_t seq_id;
/*
- * The maximum receive unit of the vnic.
- * Each vnic is associated with a function.
- * The vnic mru value overwrites the mru setting of the
- * associated function.
- * The HWRM shall make sure that vnic mru does not exceed
- * the mru of the port the function is associated with.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
*/
- uint16_t mru;
+ uint16_t target_id;
/*
- * Default Rx ring for the VNIC. This ring will
- * be chosen if packet does not match any RSS rules.
- * The aggregation ring associated with the Rx ring is
- * implied based on the Rx ring specified when the
- * aggregation ring was allocated.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- uint16_t default_rx_ring_id;
+ uint64_t resp_addr;
/*
- * Default completion ring for the VNIC. This ring will
- * be chosen if packet does not match any RSS rules.
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure MPLS TC(EXP) to pri mapping on this port.
*/
- uint16_t default_cmpl_ring_id;
-} __attribute__((packed));
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
-/* hwrm_vnic_cfg_output (size:128b/16B) */
-struct hwrm_vnic_cfg_output {
+/* hwrm_queue_mpls_qcaps_output (size:128b/16B) */
+struct hwrm_queue_mpls_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_mplstc2pri_cfg command.
+ *
+ * Each bit represents a specific pri where bit 0 represents
+ * pri 0 and bit 7 represents pri 7.
+ * # A value of 0 indicates that the pri is not configurable
+ * by the hwrm_queue_mplstc2pri_cfg command.
+ * # A value of 1 indicates that the pri is configurable.
+ * # A hwrm_queue_mplstc2pri_cfg command shall return error when
+ * trying to configure a pri that is not configurable.
+ */
+ uint8_t queue_mplstc2pri_cfg_allowed;
+ /*
+ * This is the default PRI which un-initialized MPLS values will be
+ * mapped to.
+ */
+ uint8_t hw_default_pri;
+ uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
-/******************
- * hwrm_vnic_qcfg *
- ******************/
+/******************************
+ * hwrm_queue_mplstc2pri_qcfg *
+ ******************************/
-/* hwrm_vnic_qcfg_input (size:256b/32B) */
-struct hwrm_vnic_qcfg_input {
+/* hwrm_queue_mplstc2pri_qcfg_input (size:192b/24B) */
+struct hwrm_queue_mplstc2pri_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure MPLS TC(EXP) to pri mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/* hwrm_queue_mplstc2pri_qcfg_output (size:192b/24B) */
+struct hwrm_queue_mplstc2pri_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * pri assigned to MPLS TC(EXP) 0. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 0.
+ */
+ uint8_t tc0_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 1. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 1.
+ */
+ uint8_t tc1_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 2. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 2.
+ */
+ uint8_t tc2_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 3. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 3.
+ */
+ uint8_t tc3_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 4. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 4.
+ */
+ uint8_t tc4_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 5. This value can only be changed
+ * before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 5.
+ */
+ uint8_t tc5_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 6. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 6.
+ */
+ uint8_t tc6_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 7. This value can only
+ * be changed before traffic has started.
+ * A value of 0xff indicates that no pri is assigned to the
+ * MPLS TC(EXP) 7.
+ */
+ uint8_t tc7_pri_queue_id;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************************
+ * hwrm_queue_mplstc2pri_cfg *
+ *****************************/
+
+
+/* hwrm_queue_mplstc2pri_cfg_input (size:256b/32B) */
+struct hwrm_queue_mplstc2pri_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the mplstc0_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC0_PRI_QUEUE_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the mplstc1_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC1_PRI_QUEUE_ID \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the mplstc2_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC2_PRI_QUEUE_ID \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the mplstc3_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC3_PRI_QUEUE_ID \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the mplstc4_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC4_PRI_QUEUE_ID \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the mplstc5_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC5_PRI_QUEUE_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the mplstc6_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC6_PRI_QUEUE_ID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the mplstc7_pri_queue_id field to be
+ * configured.
+ */
+ #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC7_PRI_QUEUE_ID \
+ UINT32_C(0x80)
+ /*
+ * Port ID of port for which the table is being configured.
+ * The HWRM needs to check whether this function is allowed
+ * to configure MPLS TC(EXP)to pri mapping on this port.
+ */
+ uint8_t port_id;
+ uint8_t unused_0[3];
+ /*
+ * pri assigned to MPLS TC(EXP) 0. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc0_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 1. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc1_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 2 This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc2_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 3. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc3_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 4. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc4_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 5. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc5_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 6. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc6_pri_queue_id;
+ /*
+ * pri assigned to MPLS TC(EXP) 7. This value can only
+ * be changed before traffic has started.
+ */
+ uint8_t tc7_pri_queue_id;
+} __rte_packed;
+
+/* hwrm_queue_mplstc2pri_cfg_output (size:128b/16B) */
+struct hwrm_queue_mplstc2pri_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*******************
+ * hwrm_vnic_alloc *
+ *******************/
+
+
+/* hwrm_vnic_alloc_input (size:192b/24B) */
+struct hwrm_vnic_alloc_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', this VNIC is requested to
+ * be the default VNIC for this function.
+ */
+ #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_alloc_output (size:128b/16B) */
+struct hwrm_vnic_alloc_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_vnic_free *
+ ******************/
+
+
+/* hwrm_vnic_free_input (size:192b/24B) */
+struct hwrm_vnic_free_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_vnic_free_output (size:128b/16B) */
+struct hwrm_vnic_free_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************
+ * hwrm_vnic_cfg *
+ *****************/
+
+
+/* hwrm_vnic_cfg_input (size:384b/48B) */
+struct hwrm_vnic_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is requested to
+ * be the default VNIC for the function.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * strip VLAN in the RX path.
+ * If set to '0', then VLAN stripping is disabled on
+ * this VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * buffer receive packets in the hardware until the host
+ * posts new receive buffers.
+ * If set to '0', then bd_stall is being configured to be
+ * disabled on this VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * receive both RoCE and non-RoCE traffic.
+ * If set to '0', then this VNIC is not configured to be
+ * operating in dual VNIC mode.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE \
+ UINT32_C(0x8)
+ /*
+ * When this flag is set to '1', the VNIC is requested to
+ * be configured to receive only RoCE traffic.
+ * If this flag is set to '0', then this flag shall be
+ * ignored by the HWRM.
+ * If roce_dual_vnic_mode flag is set to '1'
+ * or roce_mirroring_capable_vnic_mode flag to 1,
+ * then the HWRM client shall not set this flag to '1'.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE \
+ UINT32_C(0x10)
+ /*
+ * When a VNIC uses one destination ring group for certain
+ * application (e.g. Receive Flow Steering) where
+ * exact match is used to direct packets to a VNIC with one
+ * destination ring group only, there is no need to configure
+ * RSS indirection table for that VNIC as only one destination
+ * ring group is used.
+ *
+ * This flag is used to enable a mode where
+ * RSS is enabled in the VNIC using a RSS context
+ * for computing RSS hash but the RSS indirection table is
+ * not configured using hwrm_vnic_rss_cfg.
+ *
+ * If this mode is enabled, then the driver should not program
+ * RSS indirection table for the RSS context that is used for
+ * computing RSS hash only.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the VNIC is being configured to
+ * receive both RoCE and non-RoCE traffic, but forward only the
+ * RoCE traffic further. Also, RoCE traffic can be mirrored to
+ * L2 driver.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
+ UINT32_C(0x40)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the dflt_ring_grp field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the rss_rule field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the cos_rule field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the lb_rule field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the mru field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the default_rx_ring_id field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_RX_RING_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the default_cmpl_ring_id field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_CMPL_RING_ID \
+ UINT32_C(0x40)
+ /* This bit must be '1' for the queue_id field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_QUEUE_ID \
+ UINT32_C(0x80)
+ /* Logical vnic ID */
+ uint16_t vnic_id;
+ /*
+ * Default Completion ring for the VNIC. This ring will
+ * be chosen if packet does not match any RSS rules and if
+ * there is no COS rule.
+ */
+ uint16_t dflt_ring_grp;
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
+ * there is no RSS rule.
+ */
+ uint16_t rss_rule;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
+ * there is no COS rule.
+ */
+ uint16_t cos_rule;
+ /*
+ * RSS ID for load balancing rule/table structure.
+ * 0xFF... (All Fs) if there is no LB rule.
+ */
+ uint16_t lb_rule;
+ /*
+ * The maximum receive unit of the vnic.
+ * Each vnic is associated with a function.
+ * The vnic mru value overwrites the mru setting of the
+ * associated function.
+ * The HWRM shall make sure that vnic mru does not exceed
+ * the mru of the port the function is associated with.
+ */
+ uint16_t mru;
+ /*
+ * Default Rx ring for the VNIC. This ring will
+ * be chosen if packet does not match any RSS rules.
+ * The aggregation ring associated with the Rx ring is
+ * implied based on the Rx ring specified when the
+ * aggregation ring was allocated.
+ */
+ uint16_t default_rx_ring_id;
+ /*
+ * Default completion ring for the VNIC. This ring will
+ * be chosen if packet does not match any RSS rules.
+ */
+ uint16_t default_cmpl_ring_id;
+ /*
+ * When specified, only incoming packets classified to the specified CoS
+ * queue ID will be arriving on this VNIC. Packet priority to CoS mapping
+ * rules can be specified using HWRM_QUEUE_PRI2COS_CFG. In this mode,
+ * ntuple filters with VNIC destination specified are invalid since they
+ * conflict with the the CoS to VNIC steering rules in this mode.
+ *
+ * If this field is not specified, packet to VNIC steering will be
+ * subject to the standard L2 filter rules and any additional ntuple
+ * filter rules with destination VNIC specified.
+ */
+ uint16_t queue_id;
+ uint8_t unused0[6];
+} __rte_packed;
+
+/* hwrm_vnic_cfg_output (size:128b/16B) */
+struct hwrm_vnic_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/******************
+ * hwrm_vnic_qcfg *
+ ******************/
+
+
+/* hwrm_vnic_qcfg_input (size:256b/32B) */
+struct hwrm_vnic_qcfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
/* ID of Virtual Function whose VNIC resource is being queried. */
uint16_t vf_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_vnic_qcfg_output (size:256b/32B) */
struct hwrm_vnic_qcfg_output {
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
UINT32_C(0x40)
- uint8_t unused_1[7];
+ /*
+ * When returned with a valid CoS Queue id, the CoS Queue/VNIC association
+ * is valid. Otherwise it will return 0xFFFF to indicate no VNIC/CoS
+ * queue association.
+ */
+ uint16_t queue_id;
+ uint8_t unused_1[5];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************
* hwrm_vnic_qcaps *
uint64_t resp_addr;
uint32_t enables;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_vnic_qcaps_output (size:192b/24B) */
struct hwrm_vnic_qcaps_output {
*/
#define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_OUTERMOST_RSS_CAP \
UINT32_C(0x80)
+ /*
+ * When this bit is '1', it indicates that firmware supports the
+ * ability to steer incoming packets from one CoS queue to one
+ * VNIC. This optional feature can then be enabled
+ * using HWRM_VNIC_CFG on any VNIC. This feature is only
+ * available when NVM option “enable_cos_classfication” is set
+ * to 1. If set to '0', firmware does not support this feature.
+ */
+ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_COS_ASSIGNMENT_CAP \
+ UINT32_C(0x100)
/*
* This field advertises the maximum concurrent TPA aggregations
* supported by the VNIC on new devices that support TPA v2.
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_vnic_tpa_cfg *
* and can be queried using hwrm_vnic_tpa_qcfg.
*/
uint32_t min_agg_len;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_vnic_tpa_cfg_output (size:128b/16B) */
struct hwrm_vnic_tpa_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_vnic_rss_cfg *
/* Index to the rss indirection table. */
uint16_t rss_ctx_idx;
uint8_t unused_1[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_vnic_rss_cfg_output (size:128b/16B) */
struct hwrm_vnic_rss_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
+
+/* hwrm_vnic_rss_cfg_cmd_err (size:64b/8B) */
+struct hwrm_vnic_rss_cfg_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_UNKNOWN \
+ UINT32_C(0x0)
+ /*
+ * Unable to change global RSS mode to outer due to all active
+ * interfaces are not ready to support outer RSS hashing.
+ */
+ #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_INTERFACE_NOT_READY \
+ UINT32_C(0x1)
+ #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_LAST \
+ HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_INTERFACE_NOT_READY
+ uint8_t unused_0[7];
+} __rte_packed;
/**********************
* hwrm_vnic_rss_qcfg *
/* Index to the rss indirection table. */
uint16_t rss_ctx_idx;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_vnic_rss_qcfg_output (size:512b/64B) */
struct hwrm_vnic_rss_qcfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_vnic_plcmodes_cfg *
/*
* This value is used to determine the offset into
* packet buffer where the split data (payload) will be
- * placed according to one of of HDS placement algorithm.
+ * placed according to one of HDS placement algorithm.
*
* The lengths of packet buffers provided for split data
* shall be larger than this value.
*/
uint16_t hds_threshold;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_vnic_plcmodes_cfg_output (size:128b/16B) */
struct hwrm_vnic_plcmodes_cfg_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_vnic_plcmodes_qcfg *
/* Logical vnic ID */
uint32_t vnic_id;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_vnic_plcmodes_qcfg_output (size:192b/24B) */
struct hwrm_vnic_plcmodes_qcfg_output {
/*
* This value is used to determine the offset into
* packet buffer where the split data (payload) will be
- * placed according to one of of HDS placement algorithm.
+ * placed according to one of HDS placement algorithm.
*
* The lengths of packet buffers provided for split data
* shall be larger than this value.
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************************
* hwrm_vnic_rss_cos_lb_ctx_alloc *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_vnic_rss_cos_lb_ctx_alloc_output (size:128b/16B) */
struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************************
* hwrm_vnic_rss_cos_lb_ctx_free *
/* rss_cos_lb_ctx_id is 16 b */
uint16_t rss_cos_lb_ctx_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_vnic_rss_cos_lb_ctx_free_output (size:128b/16B) */
struct hwrm_vnic_rss_cos_lb_ctx_free_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************
* hwrm_ring_alloc *
* record.
*/
uint64_t cq_handle;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_ring_alloc_output (size:128b/16B) */
struct hwrm_ring_alloc_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************
* hwrm_ring_free *
/* Physical number of ring allocated. */
uint16_t ring_id;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_ring_free_output (size:128b/16B) */
struct hwrm_ring_free_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************
* hwrm_ring_reset *
/* Physical number of the ring. */
uint16_t ring_id;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_ring_reset_output (size:128b/16B) */
struct hwrm_ring_reset_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_ring_aggint_qcaps *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_ring_aggint_qcaps_output (size:384b/48B) */
struct hwrm_ring_aggint_qcaps_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************************
* hwrm_ring_cmpl_ring_qaggint_params *
/* Physical number of completion ring. */
uint16_t ring_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_ring_cmpl_ring_qaggint_params_output (size:256b/32B) */
struct hwrm_ring_cmpl_ring_qaggint_params_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************************************
* hwrm_ring_cmpl_ring_cfg_aggint_params *
#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_AGGR_INT \
UINT32_C(0x20)
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_ring_cmpl_ring_cfg_aggint_params_output (size:128b/16B) */
struct hwrm_ring_cmpl_ring_cfg_aggint_params_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_ring_grp_alloc *
* with the ring group.
*/
uint16_t sc;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_ring_grp_alloc_output (size:128b/16B) */
struct hwrm_ring_grp_alloc_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_ring_grp_free *
/* This is the ring group ID value. */
uint32_t ring_group_id;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_ring_grp_free_output (size:128b/16B) */
struct hwrm_ring_grp_free_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*
* special reserved flow ID to identify per function default
* flows for vSwitch offload
UINT32_C(0x40)
/*
* Setting this flag to 1 indicate the L2 fields in this command
- * pertain to source fields. Setting this flag to 0 indicate the
+ * pertain to source fields. Setting this flag to 0 indicate the
* L2 fields in this command pertain to the destination fields
* and this is the default/legacy behavior.
*/
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
* 2 - Below the given filter
*/
uint64_t l2_filter_id_hint;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_l2_filter_alloc_output (size:192b/24B) */
struct hwrm_cfa_l2_filter_alloc_output {
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_cfa_l2_filter_free *
* context.
*/
uint64_t l2_filter_id;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_l2_filter_free_output (size:128b/16B) */
struct hwrm_cfa_l2_filter_free_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_cfa_l2_filter_cfg *
* mirrored.
*/
uint32_t new_mirror_vnic_id;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_l2_filter_cfg_output (size:128b/16B) */
struct hwrm_cfa_l2_filter_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_cfa_l2_set_rx_mask *
*/
uint32_t num_vlan_tags;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_l2_set_rx_mask_output (size:128b/16B) */
struct hwrm_cfa_l2_set_rx_mask_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_l2_set_rx_mask_cmd_err (size:64b/8B) */
struct hwrm_cfa_l2_set_rx_mask_cmd_err {
#define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_LAST \
HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_cfa_vlan_antispoof_cfg *
* for the 12-bit VLAN ID.
*/
uint64_t vlan_tag_mask_tbl_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_vlan_antispoof_cfg_output (size:128b/16B) */
struct hwrm_cfa_vlan_antispoof_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************************
* hwrm_cfa_vlan_antispoof_qcfg *
* the mask value should be 0xfff for the 12-bit VLAN ID.
*/
uint64_t vlan_tag_mask_tbl_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_vlan_antispoof_qcfg_output (size:128b/16B) */
struct hwrm_cfa_vlan_antispoof_qcfg_output {
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************************
* hwrm_cfa_tunnel_filter_alloc *
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
* mirrored.
*/
uint32_t mirror_vnic_id;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_tunnel_filter_alloc_output (size:192b/24B) */
struct hwrm_cfa_tunnel_filter_alloc_output {
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_cfa_tunnel_filter_free *
uint64_t resp_addr;
/* This value is an opaque id into CFA data structures. */
uint64_t tunnel_filter_id;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_tunnel_filter_free_output (size:128b/16B) */
struct hwrm_cfa_tunnel_filter_free_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************************
* hwrm_cfa_redirect_tunnel_type_alloc *
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_FLAGS_MODIFY_DST \
UINT32_C(0x1)
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_redirect_tunnel_type_alloc_output (size:128b/16B) */
struct hwrm_cfa_redirect_tunnel_type_alloc_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************************
* hwrm_cfa_redirect_tunnel_type_free *
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_LAST \
HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL
uint8_t unused_0[5];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_redirect_tunnel_type_free_output (size:128b/16B) */
struct hwrm_cfa_redirect_tunnel_type_free_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************************
* hwrm_cfa_redirect_tunnel_type_info *
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
#define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_LAST \
HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL
uint8_t unused_0[5];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_redirect_tunnel_type_info_output (size:128b/16B) */
struct hwrm_cfa_redirect_tunnel_type_info_output {
uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_vxlan_ipv4_hdr (size:128b/16B) */
struct hwrm_vxlan_ipv4_hdr {
uint32_t src_ip_addr;
/* IPv4 destination address. */
uint32_t dest_ip_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_vxlan_ipv6_hdr (size:320b/40B) */
struct hwrm_vxlan_ipv6_hdr {
uint32_t src_ip_addr[4];
/* IPv6 destination address. */
uint32_t dest_ip_addr[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_encap_data_vxlan (size:640b/80B) */
struct hwrm_cfa_encap_data_vxlan {
/* VXLAN header flags field. */
uint8_t hdr_flags;
uint8_t unused[3];
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_cfa_encap_record_alloc *
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_MPLS \
UINT32_C(0x6)
/* VLAN */
uint8_t unused_0[3];
/* This value is encap data used for the given encap type. */
uint32_t encap_data[20];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_encap_record_alloc_output (size:128b/16B) */
struct hwrm_cfa_encap_record_alloc_output {
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************************
* hwrm_cfa_encap_record_free *
/* This value is an opaque id into CFA data structures. */
uint32_t encap_record_id;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_encap_record_free_output (size:128b/16B) */
struct hwrm_cfa_encap_record_free_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************************
* hwrm_cfa_ntuple_filter_alloc *
********************************/
-/* hwrm_cfa_ntuple_filter_alloc_input (size:1088b/136B) */
+/* hwrm_cfa_ntuple_filter_alloc_input (size:1024b/128B) */
struct hwrm_cfa_ntuple_filter_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \
UINT32_C(0x4)
/*
- * Setting of this flag indicates that the dest_id field contains function ID.
+ * Setting of this flag indicates that the dst_id field contains function ID.
* If this is not set it indicates dest_id is VNIC or VPORT.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_FID \
UINT32_C(0x8)
+ /*
+ * Setting of this flag indicates match on arp reply when ethertype is 0x0806.
+ * If this is not set it indicates no specific arp opcode matching.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_ARP_REPLY \
+ UINT32_C(0x10)
+ /*
+ * Setting of this flag indicates that the dst_id field contains RFS ring
+ * table index. If this is not set it indicates dst_id is VNIC or VPORT
+ * or function ID. Note dest_fid and dest_rfs_ring_idx can’t be set at
+ * the same time.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_RFS_RING_IDX \
+ UINT32_C(0x20)
uint32_t enables;
/*
* This bit must be '1' for the l2_filter_id field to be
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
UINT32_C(0x40000)
- /*
- * This bit must be '1' for the rfs_ring_tbl_idx field to be
- * configured.
- */
+ /* This flag is deprecated. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_RFS_RING_TBL_IDX \
UINT32_C(0x80000)
/*
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
* the pri_hint.
*/
uint64_t ntuple_filter_id_hint;
- /*
- * The value of rfs_ring_tbl_idx to be used for RFS for this filter.
- * This index is used in lieu of the RSS hash when selecting the
- * index into the RSS table to determine the rx ring.
- */
- uint16_t rfs_ring_tbl_idx;
- uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_ntuple_filter_alloc_output (size:192b/24B) */
struct hwrm_cfa_ntuple_filter_alloc_output {
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_ntuple_filter_alloc_cmd_err (size:64b/8B) */
struct hwrm_cfa_ntuple_filter_alloc_cmd_err {
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_LAST \
HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_cfa_ntuple_filter_free *
uint64_t resp_addr;
/* This value is an opaque id into CFA data structures. */
uint64_t ntuple_filter_id;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_ntuple_filter_free_output (size:128b/16B) */
struct hwrm_cfa_ntuple_filter_free_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************************
* hwrm_cfa_ntuple_filter_cfg *
*/
#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_FID \
UINT32_C(0x1)
+ /*
+ * Setting of this flag indicates that the new_dst_id field contains
+ * RFS ring table index. If this is not set it indicates new_dst_id is
+ * VNIC or VPORT or function ID. Note dest_fid and dest_rfs_ring_idx
+ * can’t be set at the same time.
+ */
+ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_RFS_RING_IDX \
+ UINT32_C(0x2)
/* This value is an opaque id into CFA data structures. */
uint64_t ntuple_filter_id;
/*
#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \
HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID
uint8_t unused_1[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_ntuple_filter_cfg_output (size:128b/16B) */
struct hwrm_cfa_ntuple_filter_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_cfa_em_flow_alloc *
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
/* Logical ID of the encapsulation record. */
uint32_t encap_record_id;
uint8_t unused_2[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_em_flow_alloc_output (size:192b/24B) */
struct hwrm_cfa_em_flow_alloc_output {
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_cfa_em_flow_free *
uint64_t resp_addr;
/* This value is an opaque id into CFA data structures. */
uint64_t em_filter_id;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_em_flow_free_output (size:128b/16B) */
struct hwrm_cfa_em_flow_free_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/************************
* hwrm_cfa_meter_qcaps *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_meter_qcaps_output (size:320b/40B) */
struct hwrm_cfa_meter_qcaps_output {
uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************************
* hwrm_cfa_meter_profile_alloc *
(UINT32_C(0x7) << 29)
#define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \
HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_meter_profile_alloc_output (size:128b/16B) */
struct hwrm_cfa_meter_profile_alloc_output {
uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_cfa_meter_profile_free *
#define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_LAST \
HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_meter_profile_free_output (size:128b/16B) */
struct hwrm_cfa_meter_profile_free_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************************
* hwrm_cfa_meter_profile_cfg *
(UINT32_C(0x7) << 29)
#define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \
HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_meter_profile_cfg_output (size:128b/16B) */
struct hwrm_cfa_meter_profile_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************************
* hwrm_cfa_meter_instance_alloc *
#define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_LAST \
HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_meter_instance_alloc_output (size:128b/16B) */
struct hwrm_cfa_meter_instance_alloc_output {
uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_cfa_meter_instance_cfg *
*/
uint16_t meter_instance_id;
uint8_t unused_1[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_meter_instance_cfg_output (size:128b/16B) */
struct hwrm_cfa_meter_instance_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************************
* hwrm_cfa_meter_instance_free *
#define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_LAST \
HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_meter_instance_free_output (size:128b/16B) */
struct hwrm_cfa_meter_instance_free_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************************
* hwrm_cfa_decap_filter_alloc *
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
* information of the decap filter.
*/
uint16_t l2_ctxt_ref_id;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_decap_filter_alloc_output (size:128b/16B) */
struct hwrm_cfa_decap_filter_alloc_output {
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************************
* hwrm_cfa_decap_filter_free *
/* This value is an opaque id into CFA data structures. */
uint32_t decap_filter_id;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_decap_filter_free_output (size:128b/16B) */
struct hwrm_cfa_decap_filter_free_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_cfa_flow_alloc *
UINT32_C(0x800)
/*
* If set to 1 an attempt will be made to try to offload this flow to the
- * most optimal flow table resource. If set to 0, the flow will be
+ * most optimal flow table resource. If set to 0, the flow will be
* placed to the default flow table resource.
*/
#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_PRI_HINT \
* If set to 1 there will be no attempt to allocate an on-chip try to
* offload this flow. If set to 0, which will keep compatibility with the
* older drivers, will cause the FW to attempt to allocate an on-chip flow
- * counter for the newly created flow. This will keep the existing behavior
+ * counter for the newly created flow. This will keep the existing behavior
* with EM flows which always had an associated flow counter.
*/
#define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NO_FLOW_COUNTER_ALLOC \
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
UINT32_C(0xff)
#define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \
HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_alloc_output (size:256b/32B) */
struct hwrm_cfa_flow_alloc_output {
uint8_t unused_1[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_alloc_cmd_err (size:64b/8B) */
struct hwrm_cfa_flow_alloc_cmd_err {
#define HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_LAST \
HWRM_CFA_FLOW_ALLOC_CMD_ERR_CODE_FLOW_CTXT_DB
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_cfa_flow_free *
uint32_t flow_counter_id;
/* This value identifies a set of CFA data structures used for a flow. */
uint64_t ext_flow_handle;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_free_output (size:256b/32B) */
struct hwrm_cfa_flow_free_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_action_data (size:960b/120B) */
struct hwrm_cfa_flow_action_data {
/* If set to 1, flow aging is enabled for this flow. */
#define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_FLOW_AGING_ENABLED \
UINT32_C(0x80)
- /* Setting of this flag indicates encap action.. */
+ /* Setting of this flag indicates encap action. */
#define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_ENCAP \
UINT32_C(0x100)
- /* Setting of this flag indicates decap action.. */
+ /* Setting of this flag indicates decap action. */
#define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_DECAP \
UINT32_C(0x200)
/* Meter id. */
#define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPIP UINT32_C(0x4)
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_GENEVE UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_MPLS UINT32_C(0x6)
/* VLAN */
#define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VLAN UINT32_C(0x7)
uint8_t unused[7];
/* This value is encap data for the associated encap type. */
uint32_t encap_data[20];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_tunnel_hdr_data (size:64b/8B) */
struct hwrm_cfa_flow_tunnel_hdr_data {
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
* Virtual Network Identifier (VNI).
*/
uint32_t tunnel_id;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_l4_key_data (size:64b/8B) */
struct hwrm_cfa_flow_l4_key_data {
/* The value of destination port. */
uint16_t l4_dst_port;
uint32_t unused;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_l3_key_data (size:512b/64B) */
struct hwrm_cfa_flow_l3_key_data {
/* NAT IPv4/IPv6 address. */
uint32_t nat_ip_address[4];
uint32_t unused[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_l2_key_data (size:448b/56B) */
struct hwrm_cfa_flow_l2_key_data {
/* Inner VLAN TCI. */
uint16_t ivlan_tci;
uint8_t unused[8];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_key_data (size:4160b/520B) */
struct hwrm_cfa_flow_key_data {
uint32_t l4_key_data[2];
/* Flow associated L4 header mask info. */
uint32_t l4_key_mask[2];
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_cfa_flow_info *
uint8_t unused_0[6];
/* This value identifies a set of CFA data structures used for a flow. */
uint64_t ext_flow_handle;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_info_output (size:5632b/704B) */
struct hwrm_cfa_flow_info_output {
uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_cfa_flow_flush *
UINT32_C(0x1)
/*
* Set to 1 to indicate flow flush operation to cleanup all the flows, meters, CFA
- * context memory tables..etc. This flag is set to 0 by older driver. For older firmware,
+ * context memory tables etc. This flag is set to 0 by older driver. For older firmware,
* setting this flag has no effect.
*/
#define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_ALL \
uint16_t num_flows;
/* Pointer to the PBL, or PDL depending on number of levels */
uint64_t page_dir;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_flush_output (size:128b/16B) */
struct hwrm_cfa_flow_flush_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_cfa_flow_stats *
uint32_t flow_id_8;
/* Flow ID of a flow. */
uint32_t flow_id_9;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_stats_output (size:1408b/176B) */
struct hwrm_cfa_flow_stats_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************************
* hwrm_cfa_flow_aging_timer_reset *
uint32_t flow_timer;
/* This value identifies a set of CFA data structures used for a flow. */
uint64_t ext_flow_handle;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_aging_timer_reset_output (size:128b/16B) */
struct hwrm_cfa_flow_aging_timer_reset_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_cfa_flow_aging_cfg *
#define HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_LAST \
HWRM_CFA_FLOW_AGING_CFG_INPUT_EEM_CTX_MEM_TYPE_EJECTION_DATA
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_aging_cfg_output (size:128b/16B) */
struct hwrm_cfa_flow_aging_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_cfa_flow_aging_qcfg *
#define HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_LAST \
HWRM_CFA_FLOW_AGING_QCFG_INPUT_FLAGS_PATH_RX
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_aging_qcfg_output (size:320b/40B) */
struct hwrm_cfa_flow_aging_qcfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************************
* hwrm_cfa_flow_aging_qcaps *
#define HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_LAST \
HWRM_CFA_FLOW_AGING_QCAPS_INPUT_FLAGS_PATH_RX
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_flow_aging_qcaps_output (size:256b/32B) */
struct hwrm_cfa_flow_aging_qcaps_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************************
* hwrm_cfa_tcp_flag_process_qcfg *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_tcp_flag_process_qcfg_output (size:192b/24B) */
struct hwrm_cfa_tcp_flag_process_qcfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_cfa_pair_info *
uint8_t pair_vfid;
/* Pair name (32 byte string). */
char pair_name[32];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_pair_info_output (size:576b/72B) */
struct hwrm_cfa_pair_info_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************************
* hwrm_cfa_redirect_query_tunnel_type *
/* The source function id. */
uint16_t src_fid;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_redirect_query_tunnel_type_output (size:128b/16B) */
struct hwrm_cfa_redirect_query_tunnel_type_output {
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_GENEVE \
UINT32_C(0x20)
- /* Multi-Protocol Lable Switching (MPLS) */
+ /* Multi-Protocol Label Switching (MPLS) */
#define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_MPLS \
UINT32_C(0x40)
/* Stateless Transport Tunnel (STT) */
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_cfa_ctx_mem_rgtr *
uint32_t unused_0;
/* Pointer to the PBL, or PDL depending on number of levels */
uint64_t page_dir;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_ctx_mem_rgtr_output (size:128b/16B) */
struct hwrm_cfa_ctx_mem_rgtr_output {
/* The length of the response data in number of bytes. */
uint16_t resp_len;
/*
- * Id/Handle to the recently register context memory. This handle is passed
+ * Id/Handle to the recently register context memory. This handle is passed
* to the CFA feature.
*/
uint16_t ctx_id;
uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_cfa_ctx_mem_unrgtr *
*/
uint64_t resp_addr;
/*
- * Id/Handle to the recently register context memory. This handle is passed
+ * Id/Handle to the recently register context memory. This handle is passed
* to the CFA feature.
*/
uint16_t ctx_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_ctx_mem_unrgtr_output (size:128b/16B) */
struct hwrm_cfa_ctx_mem_unrgtr_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_cfa_ctx_mem_qctx *
*/
uint64_t resp_addr;
/*
- * Id/Handle to the recently register context memory. This handle is passed
+ * Id/Handle to the recently register context memory. This handle is passed
* to the CFA feature.
*/
uint16_t ctx_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_ctx_mem_qctx_output (size:256b/32B) */
struct hwrm_cfa_ctx_mem_qctx_output {
uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_cfa_ctx_mem_qcaps *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_ctx_mem_qcaps_output (size:128b/16B) */
struct hwrm_cfa_ctx_mem_qcaps_output {
uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_cfa_eem_qcaps *
#define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \
UINT32_C(0x4)
uint32_t unused_0;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_eem_qcaps_output (size:320b/40B) */
struct hwrm_cfa_eem_qcaps_output {
UINT32_C(0x2)
/*
* When set to 1, indicates the the FW supports the Centralized
- * Memory Model. The concept designates one entity for the
+ * Memory Model. The concept designates one entity for the
* memory allocation while all others ‘subscribe’ to it.
*/
#define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
UINT32_C(0x4)
/*
* When set to 1, indicates the the FW supports the Detached
- * Centralized Memory Model. The memory is allocated and managed
- * as a separate entity. All PFs and VFs will be granted direct
+ * Centralized Memory Model. The memory is allocated and managed
+ * as a separate entity. All PFs and VFs will be granted direct
* or semi-direct access to the allocated memory while none of
* which can interfere with the management of the memory.
*/
#define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \
UINT32_C(0x10)
/*
- * The maximum number of entries supported by EEM. When configuring the host memory
+ * The maximum number of entries supported by EEM. When configuring the host memory
* the number of numbers of entries that can supported are -
* 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M, 128M entries.
* Any value that are not these values, the FW will round down to the closest support
uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************
* hwrm_cfa_eem_cfg *
uint16_t group_id;
uint16_t unused_0;
/*
- * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1,
+ * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1,
* RECORD, EFC all have the same number of entries and all tables will be configured
- * using this value. Current minimum value is 32k. Current maximum value is 128M.
+ * using this value. Current minimum value is 32k. Current maximum value is 128M.
*/
uint32_t num_entries;
uint32_t unused_1;
uint16_t fid_ctx_id;
uint16_t unused_2;
uint32_t unused_3;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_eem_cfg_output (size:128b/16B) */
struct hwrm_cfa_eem_cfg_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_cfa_eem_qcfg *
/* When set to 1, indicates the configuration is the RX flow. */
#define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x2)
uint32_t unused_0;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_eem_qcfg_output (size:256b/32B) */
struct hwrm_cfa_eem_qcfg_output {
uint8_t unused_2[5];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*******************
* hwrm_cfa_eem_op *
#define HWRM_CFA_EEM_OP_INPUT_OP_RESERVED UINT32_C(0x0)
/*
* To properly stop EEM and ensure there are no DMA's, the caller
- * must disable EEM for the given PF, using this call. This will
+ * must disable EEM for the given PF, using this call. This will
* safely disable EEM and ensure that all DMA'ed to the
* keys/records/efc have been completed.
*/
/*
* Once the EEM host memory has been configured, EEM options have
* been configured. Then the caller should enable EEM for the given
- * PF. Note once this call has been made, then the EEM mechanism
+ * PF. Note once this call has been made, then the EEM mechanism
* will be active and DMA's will occur as packets are processed.
*/
#define HWRM_CFA_EEM_OP_INPUT_OP_EEM_ENABLE UINT32_C(0x2)
#define HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP UINT32_C(0x3)
#define HWRM_CFA_EEM_OP_INPUT_OP_LAST \
HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_eem_op_output (size:128b/16B) */
struct hwrm_cfa_eem_op_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************************
* hwrm_cfa_adv_flow_mgnt_qcaps *
*/
uint64_t resp_addr;
uint32_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_adv_flow_mgnt_qcaps_output (size:128b/16B) */
struct hwrm_cfa_adv_flow_mgnt_qcaps_output {
*/
#define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_L2_HEADER_SOURCE_FIELDS_SUPPORTED \
UINT32_C(0x800)
+ /*
+ * If set to 1, firmware is capable of supporting ARP ethertype as
+ * matching criteria for HWRM_CFA_NTUPLE_FILTER_ALLOC command on the
+ * RX direction. By default, this flag should be 0 for older version
+ * of firmware.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ARP_SUPPORTED \
+ UINT32_C(0x1000)
+ /*
+ * Value of 1 to indicate that firmware supports setting of
+ * rfs_ring_tbl_idx in dst_id field of the HWRM_CFA_NTUPLE_ALLOC
+ * command. Value of 0 indicates firmware does not support
+ * rfs_ring_tbl_idx in dst_id field.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RFS_RING_TBL_IDX_V2_SUPPORTED \
+ UINT32_C(0x2000)
+ /*
+ * If set to 1, firmware is capable of supporting IPv4/IPv6 as
+ * ethertype in HWRM_CFA_NTUPLE_FILTER_ALLOC command on the RX
+ * direction. By default, this flag should be 0 for older version
+ * of firmware.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ETHERTYPE_IP_SUPPORTED \
+ UINT32_C(0x4000)
uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************
* hwrm_cfa_tflib *
uint8_t unused0[4];
/* TFLIB request data. */
uint32_t tf_req[26];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_cfa_tflib_output (size:5632b/704B) */
struct hwrm_cfa_tflib_output {
uint8_t unused1[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************************
* hwrm_tunnel_dst_port_query *
#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_LAST \
HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_tunnel_dst_port_query_output (size:128b/16B) */
struct hwrm_tunnel_dst_port_query_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************************
* hwrm_tunnel_dst_port_alloc *
*/
uint16_t tunnel_dst_port_val;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_tunnel_dst_port_alloc_output (size:128b/16B) */
struct hwrm_tunnel_dst_port_alloc_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************************
* hwrm_tunnel_dst_port_free *
*/
uint16_t tunnel_dst_port_id;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_tunnel_dst_port_free_output (size:128b/16B) */
struct hwrm_tunnel_dst_port_free_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* Periodic statistics context DMA to host. */
/* ctx_hw_stats (size:1280b/160B) */
uint64_t tpa_events;
/* Number of TPA aborts */
uint64_t tpa_aborts;
-} __attribute__((packed));
+} __rte_packed;
/* Periodic statistics context DMA to host. */
/* ctx_hw_stats_ext (size:1344b/168B) */
uint64_t rx_tpa_bytes;
/* Number of TPA errors */
uint64_t rx_tpa_errors;
-} __attribute__((packed));
+} __rte_packed;
/* Periodic Engine statistics context DMA to host. */
/* ctx_eng_stats (size:512b/64B) */
* the unit is count of clock cycles
*/
uint64_t cdd_engine_usage;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_stat_ctx_alloc *
* for the periodic DMA updates.
*/
uint16_t stats_dma_length;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_stat_ctx_alloc_output (size:128b/16B) */
struct hwrm_stat_ctx_alloc_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_stat_ctx_free *
/* ID of the statistics context that is being queried. */
uint32_t stat_ctx_id;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_stat_ctx_free_output (size:128b/16B) */
struct hwrm_stat_ctx_free_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***********************
* hwrm_stat_ctx_query *
/* ID of the statistics context that is being queried. */
uint32_t stat_ctx_id;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_stat_ctx_query_output (size:1408b/176B) */
struct hwrm_stat_ctx_query_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_stat_ctx_eng_query *
/* ID of the statistics context that is being queried. */
uint32_t stat_ctx_id;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_stat_ctx_eng_query_output (size:640b/80B) */
struct hwrm_stat_ctx_eng_query_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_stat_ctx_clr_stats *
/* ID of the statistics context that is being queried. */
uint32_t stat_ctx_id;
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_stat_ctx_clr_stats_output (size:128b/16B) */
struct hwrm_stat_ctx_clr_stats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/********************
* hwrm_pcie_qstats *
* PCIe statistics will be stored
*/
uint64_t pcie_stat_host_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_pcie_qstats_output (size:128b/16B) */
struct hwrm_pcie_qstats_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* PCIe Statistics Formats */
/* pcie_ctx_hw_stats (size:768b/96B) */
uint64_t pcie_tl_signal_integrity;
/* Number of times LTSSM entered Recovery state */
uint64_t pcie_link_integrity;
- /* Number of TLP bytes that have been trasmitted */
+ /* Number of TLP bytes that have been transmitted */
uint64_t pcie_tx_traffic_rate;
/* Number of TLP bytes that have been received */
uint64_t pcie_rx_traffic_rate;
- /* Number of DLLP bytes that have been trasmitted */
+ /* Number of DLLP bytes that have been transmitted */
uint64_t pcie_tx_dllp_statistics;
/* Number of DLLP bytes that have been received */
uint64_t pcie_rx_dllp_statistics;
* to Recovery
*/
uint64_t pcie_recovery_histogram;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_exec_fwd_resp *
*/
uint16_t encap_resp_target_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_exec_fwd_resp_output (size:128b/16B) */
struct hwrm_exec_fwd_resp_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/************************
* hwrm_reject_fwd_resp *
*/
uint16_t encap_resp_target_id;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_reject_fwd_resp_output (size:128b/16B) */
struct hwrm_reject_fwd_resp_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************
* hwrm_fwd_resp *
uint64_t encap_resp_addr;
/* This is an encapsulated response. */
uint32_t encap_resp[24];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_fwd_resp_output (size:128b/16B) */
struct hwrm_fwd_resp_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************************
* hwrm_fwd_async_event_cmpl *
uint8_t unused_0[6];
/* This is an encapsulated asynchronous event completion. */
uint32_t encap_async_event_cmpl[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_fwd_async_event_cmpl_output (size:128b/16B) */
struct hwrm_fwd_async_event_cmpl_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_nvm_raw_write_blk *
uint64_t resp_addr;
/*
* 64-bit Host Source Address.
- * This is the loation of the source data to be written.
+ * This is the location of the source data to be written.
*/
uint64_t host_src_addr;
/*
uint32_t dest_addr;
/* Length of data to be written, in bytes. */
uint32_t len;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_raw_write_blk_output (size:128b/16B) */
struct hwrm_nvm_raw_write_blk_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*****************
* hwrm_nvm_read *
/* The length of the data to be read, in bytes. */
uint32_t len;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_read_output (size:128b/16B) */
struct hwrm_nvm_read_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*********************
* hwrm_nvm_raw_dump *
uint32_t offset;
/* Total length of NVRAM contents to be read, in bytes. */
uint32_t len;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_raw_dump_output (size:128b/16B) */
struct hwrm_nvm_raw_dump_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_nvm_get_dir_entries *
* This is the host address where the directory will be written.
*/
uint64_t host_dest_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_get_dir_entries_output (size:128b/16B) */
struct hwrm_nvm_get_dir_entries_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_nvm_get_dir_info *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_get_dir_info_output (size:192b/24B) */
struct hwrm_nvm_get_dir_info_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/******************
* hwrm_nvm_write *
* The requested length of the allocated NVM for the item, in bytes. This value may be greater than or equal to the specified data length (dir_data_length).
* If this value is less than the specified data length, it will be ignored.
* The response will contain the actual allocated item length, which may be greater than the requested item length.
- * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accomodate
+ * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accommodate
* the potential future growth of an item (e.g. upgraded firmware with a size increase, log growth, expanded configuration data).
*/
uint32_t dir_item_length;
uint32_t unused_0;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_write_output (size:128b/16B) */
struct hwrm_nvm_write_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_write_cmd_err (size:64b/8B) */
struct hwrm_nvm_write_cmd_err {
#define HWRM_NVM_WRITE_CMD_ERR_CODE_LAST \
HWRM_NVM_WRITE_CMD_ERR_CODE_NO_SPACE
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/*******************
* hwrm_nvm_modify *
*/
uint32_t len;
uint8_t unused_1[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_modify_output (size:128b/16B) */
struct hwrm_nvm_modify_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_nvm_find_dir_entry *
#define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_LAST \
HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT
uint8_t unused_0[3];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_find_dir_entry_output (size:256b/32B) */
struct hwrm_nvm_find_dir_entry_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_nvm_erase_dir_entry *
/* Directory Entry Index */
uint16_t dir_idx;
uint8_t unused_0[6];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_erase_dir_entry_output (size:128b/16B) */
struct hwrm_nvm_erase_dir_entry_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_nvm_get_dev_info *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_get_dev_info_output (size:256b/32B) */
struct hwrm_nvm_get_dev_info_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_nvm_mod_dir_entry *
* value of the content in the directory entry.
*/
uint32_t checksum;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_mod_dir_entry_output (size:128b/16B) */
struct hwrm_nvm_mod_dir_entry_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**************************
* hwrm_nvm_verify_update *
*/
uint16_t dir_ext;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_verify_update_output (size:128b/16B) */
struct hwrm_nvm_verify_update_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/***************************
* hwrm_nvm_install_update *
#define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ERASE_UNUSED_SPACE \
UINT32_C(0x1)
/*
- * If set to 1, then unspecifed images, images not in the package file, will be safely deleted.
+ * If set to 1, then unspecified images, images not in the package file, will be safely deleted.
* When combined with erase_unused_space then unspecified images will be securely erased.
*/
#define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_REMOVE_UNUSED_PKG \
#define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ALLOWED_TO_DEFRAG \
UINT32_C(0x4)
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_install_update_output (size:192b/24B) */
struct hwrm_nvm_install_update_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_install_update_cmd_err (size:64b/8B) */
struct hwrm_nvm_install_update_cmd_err {
#define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_LAST \
HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_NO_SPACE
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/******************
* hwrm_nvm_flush *
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_flush_output (size:128b/16B) */
struct hwrm_nvm_flush_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_flush_cmd_err (size:64b/8B) */
struct hwrm_nvm_flush_cmd_err {
#define HWRM_NVM_FLUSH_CMD_ERR_CODE_LAST \
HWRM_NVM_FLUSH_CMD_ERR_CODE_FAIL
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_nvm_get_variable *
#define HWRM_NVM_GET_VARIABLE_INPUT_FLAGS_FACTORY_DFLT \
UINT32_C(0x1)
uint8_t unused_0;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_get_variable_output (size:128b/16B) */
struct hwrm_nvm_get_variable_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_get_variable_cmd_err (size:64b/8B) */
struct hwrm_nvm_get_variable_cmd_err {
#define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LAST \
HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LEN_TOO_SHORT
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/*************************
* hwrm_nvm_set_variable *
#define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FACTORY_DEFAULT \
UINT32_C(0x80)
uint8_t unused_0;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_set_variable_output (size:128b/16B) */
struct hwrm_nvm_set_variable_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_set_variable_cmd_err (size:64b/8B) */
struct hwrm_nvm_set_variable_cmd_err {
#define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_LAST \
HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/****************************
* hwrm_nvm_validate_option *
/* index for the 4th dimensions */
uint16_t index_3;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_validate_option_output (size:128b/16B) */
struct hwrm_nvm_validate_option_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_nvm_validate_option_cmd_err (size:64b/8B) */
struct hwrm_nvm_validate_option_cmd_err {
#define HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_LAST \
HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_UNKNOWN
uint8_t unused_0[7];
-} __attribute__((packed));
+} __rte_packed;
/*****************
* hwrm_fw_reset *
*/
#define HWRM_FW_RESET_INPUT_FLAGS_RESET_GRACEFUL UINT32_C(0x1)
uint8_t unused_0[4];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_fw_reset_output (size:128b/16B) */
struct hwrm_fw_reset_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
/**********************
* hwrm_port_ts_query *
/* Port ID of port that is being queried. */
uint16_t port_id;
uint8_t unused_0[2];
-} __attribute__((packed));
+} __rte_packed;
/* hwrm_port_ts_query_output (size:192b/24B) */
struct hwrm_port_ts_query_output {
* the order of writes has to be such that this field is written last.
*/
uint8_t valid;
-} __attribute__((packed));
+} __rte_packed;
#endif /* _HSI_STRUCT_DEF_DPDK_H_ */
git.droids-corp.org / dpdk.git / blobdiff