net/i40e: refactor VXLAN flow parsing function

[dpdk.git] / drivers / net / bnxt / rte_pmd_bnxt.h

diff --git a/drivers/net/bnxt/rte_pmd_bnxt.h b/drivers/net/bnxt/rte_pmd_bnxt.h
index 024620f..db9ce77 100644 (file)
--- a/drivers/net/bnxt/rte_pmd_bnxt.h
+++ b/drivers/net/bnxt/rte_pmd_bnxt.h
@@ -91,6 +91,26 @@ int rte_pmd_bnxt_set_vf_mac_addr(uint8_t port, uint16_t vf,
 int
 rte_pmd_bnxt_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
 
+/**
+ * Enable/Disable vf vlan insert
+ *
+ * @param port
+ *    The port identifier of the Ethernet device.
+ * @param vf
+ *    ID specifying VF.
+ * @param vlan_id
+ *    0 - Disable VF's vlan insert.
+ *    n - Enable; n is inserted as the vlan id.
+ *
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int
+rte_pmd_bnxt_set_vf_vlan_insert(uint8_t port, uint16_t vf,
+               uint16_t vlan_id);
+
 /**
  * Enable/Disable hardware VF VLAN filtering by an Ethernet device of
  * received VLAN packets tagged with a given VLAN Tag Identifier.
@@ -164,6 +184,41 @@ int rte_pmd_bnxt_set_all_queues_drop_en(uint8_t port, uint8_t on);
 int rte_pmd_bnxt_set_vf_rate_limit(uint8_t port, uint16_t vf,
                                uint16_t tx_rate, uint64_t q_msk);
 
+/**
+ * Get VF's statistics
+ *
+ * @param port
+ *    The port identifier of the Ethernet device.
+ * @param vf_id
+ *    VF on which to get.
+ * @param stats
+ *    A pointer to a structure of type *rte_eth_stats* to be filled with
+ *    the values of device counters supported statistics:
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+
+int rte_pmd_bnxt_get_vf_stats(uint8_t port,
+                             uint16_t vf_id,
+                             struct rte_eth_stats *stats);
+
+/**
+ * Clear VF's statistics
+ *
+ * @param port
+ *    The port identifier of the Ethernet device.
+ * @param vf_id
+ *    VF on which to get.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_bnxt_reset_vf_stats(uint8_t port,
+                               uint16_t vf_id);
+
 /**
  * Enable/Disable VF VLAN anti spoof
  *
@@ -181,4 +236,75 @@ int rte_pmd_bnxt_set_vf_rate_limit(uint8_t port, uint16_t vf,
  *   - (-EINVAL) if bad parameter.
  */
 int rte_pmd_bnxt_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+
+/**
+ * Set RX L2 Filtering mode of a VF of an Ethernet device.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param vf
+ *   VF id.
+ * @param rx_mask
+ *    The RX mode mask
+ * @param on
+ *    1 - Enable a VF RX mode.
+ *    0 - Disable a VF RX mode.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_bnxt_set_vf_rxmode(uint8_t port, uint16_t vf,
+                               uint16_t rx_mask, uint8_t on);
+
+/**
+ * Returns the number of default RX queues on a VF
+ *
+ * @param port
+ *    The port identifier of the Ethernet device.
+ * @param vf
+ *   VF id.
+ * @return
+ *   - Non-negative value - Number of default RX queues
+ *   - (-EINVAL) if bad parameter.
+ *   - (-ENOTSUP) if on a function without VFs
+ *   - (-ENOMEM) on an allocation failure
+ *   - (-1) firmware interface error
+ */
+int rte_pmd_bnxt_get_vf_rx_status(uint8_t port, uint16_t vf_id);
+
+/**
+ * Queries the TX drop counter for the function
+ *
+ * @param port
+ *    The port identifier of the Ethernet device.
+ * @param vf_id
+ *    VF on which to get.
+ * @param count
+ *    Pointer to a uint64_t that will be populated with the counter value.
+ * @return
+ *   - Positive Non-zero value - Error code from HWRM
+ *   - (-EINVAL) invalid vf_id specified.
+ *   - (-ENOTSUP) Ethernet device is not a PF
+ */
+int rte_pmd_bnxt_get_vf_tx_drop_count(uint8_t port, uint16_t vf_id,
+                                     uint64_t *count);
+
+/**
+ * Programs the MAC address for the function specified
+ *
+ * @param port
+ *    The port identifier of the Ethernet device.
+ * @param mac_addr
+ *    The MAC address to be programmed in the filter.
+ * @param vf_id
+ *    VF on which to get.
+ * @return
+ *   - Positive Non-zero value - Error code from HWRM
+ *   - (-EINVAL) invalid vf_id specified.
+ *   - (-ENOTSUP) Ethernet device is not a PF
+ *   - (-ENOMEM) on an allocation failure
+ */
+int rte_pmd_bnxt_mac_addr_add(uint8_t port, struct ether_addr *mac_addr,
+                               uint32_t vf_id);
 #endif /* _PMD_BNXT_H_ */