#include "bnxt.h"
#include "ulp_template_db_enum.h"
+#define ULP_BUFFER_ALIGN_8_BITS 8
#define ULP_BUFFER_ALIGN_8_BYTE 8
#define ULP_BUFFER_ALIGN_16_BYTE 16
#define ULP_BUFFER_ALIGN_64_BYTE 64
#define ULP_64B_IN_BYTES 8
+
/*
* Macros for bitmap sets and gets
* These macros can be used if the val are power of 2.
/* Macros to read the computed fields */
#define ULP_COMP_FLD_IDX_RD(params, idx) \
- rte_be_to_cpu_32((params)->comp_fld[(idx)])
+ rte_be_to_cpu_64((params)->comp_fld[(idx)])
#define ULP_COMP_FLD_IDX_WR(params, idx, val) \
- ((params)->comp_fld[(idx)] = rte_cpu_to_be_32((val)))
+ ((params)->comp_fld[(idx)] = rte_cpu_to_be_64((uint64_t)(val)))
/*
* Making the blob statically sized to 128 bytes for now.
* The blob must be initialized with ulp_blob_init prior to using.
};
struct ulp_regfile {
- struct ulp_regfile_entry entry[BNXT_ULP_REGFILE_INDEX_LAST];
+ struct ulp_regfile_entry entry[BNXT_ULP_RF_IDX_LAST];
};
/*
*/
uint32_t
ulp_regfile_read(struct ulp_regfile *regfile,
- enum bnxt_ulp_regfile_index field,
+ enum bnxt_ulp_rf_idx field,
uint64_t *data);
/*
* data [in] The value is written into this variable. It is going to be in the
* same byte order as it was written.
*
- * returns zero on error
+ * returns zero on success
*/
-uint32_t
+int32_t
ulp_regfile_write(struct ulp_regfile *regfile,
- enum bnxt_ulp_regfile_index field,
+ enum bnxt_ulp_rf_idx field,
uint64_t data);
+/*
+ * Add data to the byte array in Little endian format.
+ *
+ * bs [in] The byte array where data is pushed
+ *
+ * pos [in] The offset where data is pushed
+ *
+ * len [in] The number of bits to be added to the data array.
+ *
+ * val [in] The data to be added to the data array.
+ *
+ * returns the number of bits pushed.
+ */
+uint32_t
+ulp_bs_push_lsb(uint8_t *bs, uint16_t pos, uint8_t len, uint8_t *val);
+
+/*
+ * Add data to the byte array in Big endian format.
+ *
+ * bs [in] The byte array where data is pushed
+ *
+ * pos [in] The offset where data is pushed
+ *
+ * len [in] The number of bits to be added to the data array.
+ *
+ * val [in] The data to be added to the data array.
+ *
+ * returns the number of bits pushed.
+ */
+uint32_t
+ulp_bs_push_msb(uint8_t *bs, uint16_t pos, uint8_t len, uint8_t *val);
+
/*
* Initializes the blob structure for creating binary blob
*
* The offset of the data is updated after each push of data.
* NULL returned on error, pointer pushed value otherwise.
*/
-uint32_t
+int32_t
ulp_blob_push_encap(struct ulp_blob *blob,
uint8_t *data,
uint32_t datalen);
ulp_blob_data_get(struct ulp_blob *blob,
uint16_t *datalen);
+/*
+ * Get the data length of the binary blob.
+ *
+ * blob [in] The blob's data len to be retrieved.
+ *
+ * returns length of the binary blob
+ */
+uint16_t
+ulp_blob_data_len_get(struct ulp_blob *blob);
+
+/*
+ * Get data from the byte array in Little endian format.
+ *
+ * src [in] The byte array where data is extracted from
+ *
+ * dst [out] The byte array where data is pulled into
+ *
+ * size [in] The size of dst array in bytes
+ *
+ * offset [in] The offset where data is pulled
+ *
+ * len [in] The number of bits to be extracted from the data array
+ *
+ * returns None.
+ */
+void
+ulp_bs_pull_lsb(uint8_t *src, uint8_t *dst, uint32_t size,
+ uint32_t offset, uint32_t len);
+
+/*
+ * Get data from the byte array in Big endian format.
+ *
+ * src [in] The byte array where data is extracted from
+ *
+ * dst [out] The byte array where data is pulled into
+ *
+ * offset [in] The offset where data is pulled
+ *
+ * len [in] The number of bits to be extracted from the data array
+ *
+ * returns None.
+ */
+void
+ulp_bs_pull_msb(uint8_t *src, uint8_t *dst,
+ uint32_t offset, uint32_t len);
+
/*
* Extract data from the binary blob using given offset.
*
ulp_blob_pad_push(struct ulp_blob *blob,
uint32_t datalen);
+/*
+ * Adds pad to an initialized blob at the current offset based on
+ * the alignment.
+ *
+ * blob [in] The blob that needs to be aligned
+ *
+ * align [in] Alignment in bits.
+ *
+ * returns the number of pad bits added, -1 on failure
+ */
+int32_t
+ulp_blob_pad_align(struct ulp_blob *blob,
+ uint32_t align);
+
/*
* Set the 64 bit swap start index of the binary blob.
*
* vice-versa.
*
* blob [in] The blob's data to be used for swap.
+ * chunk_size[in] the swap is done within the chunk in bytes
*
* returns void.
*/
void
-ulp_blob_perform_byte_reverse(struct ulp_blob *blob);
+ulp_blob_perform_byte_reverse(struct ulp_blob *blob,
+ uint32_t chunk_size);
/*
* Perform the blob buffer 64 bit word swap.
void
ulp_blob_perform_64B_byte_swap(struct ulp_blob *blob);
+/*
+ * Perform the blob buffer merge.
+ * This api makes the src blob merged to the dst blob.
+ * The block size and pad size help in padding the dst blob
+ *
+ * dst [in] The destination blob, the blob to be merged.
+ * src [in] The src blob.
+ * block_size [in] The size of the block after which padding gets applied.
+ * pad [in] The size of the pad to be applied.
+ *
+ * returns 0 on success.
+ */
+int32_t
+ulp_blob_block_merge(struct ulp_blob *dst, struct ulp_blob *src,
+ uint32_t block_size, uint32_t pad);
+
+/*
+ * Append bits from src blob to dst blob.
+ * Only works on BE blobs
+ *
+ * dst [in/out] The destination blob to append to
+ *
+ * src [in] The src blob to append from
+ *
+ * src_offset [in] The bit offset from src to start at
+ *
+ * src_len [in] The number of bits to append to dst
+ *
+ * returns 0 on success, non-zero on error
+ */
+int32_t
+ulp_blob_append(struct ulp_blob *dst, struct ulp_blob *src,
+ uint16_t src_offset, uint16_t src_len);
+
+/*
+ * Perform the blob buffer copy.
+ * This api makes the src blob merged to the dst blob.
+ *
+ * dst [in] The destination blob, the blob to be merged.
+ * src [in] The src blob.
+ *
+ * returns 0 on success.
+ */
+int32_t
+ulp_blob_buffer_copy(struct ulp_blob *dst, struct ulp_blob *src);
+
/*
* Read data from the operand
*
uint8_t *val,
uint16_t bitlen);
-/*
- * copy the buffer in the encap format which is 2 bytes.
- * The MSB of the src is placed at the LSB of dst.
- *
- * dst [out] The destination buffer
- * src [in] The source buffer dst
- * size[in] size of the buffer.
- * align[in] The alignment is either 8 or 16.
- */
-void
-ulp_encap_buffer_copy(uint8_t *dst,
- const uint8_t *src,
- uint16_t size,
- uint16_t align);
-
/*
* Check the buffer is empty
*
uint32_t ulp_bitmap_is_ones(uint8_t *bitmap, int32_t size);
/* Function to check if bitmap is not zero. Return 1 on success */
-uint32_t ulp_bitmap_notzero(uint8_t *bitmap, int32_t size);
+uint32_t ulp_bitmap_notzero(const uint8_t *bitmap, int32_t size);
+
+/* returns 0 if input is power of 2 */
+int32_t ulp_util_is_power_of_2(uint64_t x);
#endif /* _ULP_UTILS_H_ */
git.droids-corp.org / dpdk.git / blobdiff