-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2014-2017 Chelsio Communications.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Chelsio Communications nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2014-2018 Chelsio Communications.
+ * All rights reserved.
*/
#include <netinet/in.h>
}
}
+/**
+ * t4_ctrl_eq_free - free a control egress queue
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF owning the queue
+ * @vf: the VF owning the queue
+ * @eqid: egress queue id
+ *
+ * Frees a control egress queue.
+ */
+int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int eqid)
+{
+ struct fw_eq_ctrl_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_CTRL_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
+ V_FW_EQ_CTRL_CMD_PFN(pf) |
+ V_FW_EQ_CTRL_CMD_VFN(vf));
+ c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_CTRL_CMD_FREE | FW_LEN16(c));
+ c.cmpliqid_eqid = cpu_to_be32(V_FW_EQ_CTRL_CMD_EQID(eqid));
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
/**
* t4_handle_fw_rpl - process a FW reply message
* @adap: the adapter
}
return 0;
}
+
+/**
+ * t4_memory_rw_addr - read/write adapter memory via PCIE memory window
+ * @adap: the adapter
+ * @win: PCI-E Memory Window to use
+ * @addr: address within adapter memory
+ * @len: amount of memory to transfer
+ * @hbuf: host memory buffer
+ * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
+ *
+ * Reads/writes an [almost] arbitrary memory region in the firmware: the
+ * firmware memory address and host buffer must be aligned on 32-bit
+ * boudaries; the length may be arbitrary.
+ *
+ * NOTES:
+ * 1. The memory is transferred as a raw byte sequence from/to the
+ * firmware's memory. If this memory contains data structures which
+ * contain multi-byte integers, it's the caller's responsibility to
+ * perform appropriate byte order conversions.
+ *
+ * 2. It is the Caller's responsibility to ensure that no other code
+ * uses the specified PCI-E Memory Window while this routine is
+ * using it. This is typically done via the use of OS-specific
+ * locks, etc.
+ */
+int t4_memory_rw_addr(struct adapter *adap, int win, u32 addr,
+ u32 len, void *hbuf, int dir)
+{
+ u32 pos, offset, resid;
+ u32 win_pf, mem_reg, mem_aperture, mem_base;
+ u32 *buf;
+
+ /* Argument sanity checks ...*/
+ if (addr & 0x3 || (uintptr_t)hbuf & 0x3)
+ return -EINVAL;
+ buf = (u32 *)hbuf;
+
+ /* It's convenient to be able to handle lengths which aren't a
+ * multiple of 32-bits because we often end up transferring files to
+ * the firmware. So we'll handle that by normalizing the length here
+ * and then handling any residual transfer at the end.
+ */
+ resid = len & 0x3;
+ len -= resid;
+
+ /* Each PCI-E Memory Window is programmed with a window size -- or
+ * "aperture" -- which controls the granularity of its mapping onto
+ * adapter memory. We need to grab that aperture in order to know
+ * how to use the specified window. The window is also programmed
+ * with the base address of the Memory Window in BAR0's address
+ * space. For T4 this is an absolute PCI-E Bus Address. For T5
+ * the address is relative to BAR0.
+ */
+ mem_reg = t4_read_reg(adap,
+ PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN,
+ win));
+ mem_aperture = 1 << (G_WINDOW(mem_reg) + X_WINDOW_SHIFT);
+ mem_base = G_PCIEOFST(mem_reg) << X_PCIEOFST_SHIFT;
+
+ win_pf = is_t4(adap->params.chip) ? 0 : V_PFNUM(adap->pf);
+
+ /* Calculate our initial PCI-E Memory Window Position and Offset into
+ * that Window.
+ */
+ pos = addr & ~(mem_aperture - 1);
+ offset = addr - pos;
+
+ /* Set up initial PCI-E Memory Window to cover the start of our
+ * transfer. (Read it back to ensure that changes propagate before we
+ * attempt to use the new value.)
+ */
+ t4_write_reg(adap,
+ PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, win),
+ pos | win_pf);
+ t4_read_reg(adap,
+ PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, win));
+
+ /* Transfer data to/from the adapter as long as there's an integral
+ * number of 32-bit transfers to complete.
+ *
+ * A note on Endianness issues:
+ *
+ * The "register" reads and writes below from/to the PCI-E Memory
+ * Window invoke the standard adapter Big-Endian to PCI-E Link
+ * Little-Endian "swizzel." As a result, if we have the following
+ * data in adapter memory:
+ *
+ * Memory: ... | b0 | b1 | b2 | b3 | ...
+ * Address: i+0 i+1 i+2 i+3
+ *
+ * Then a read of the adapter memory via the PCI-E Memory Window
+ * will yield:
+ *
+ * x = readl(i)
+ * 31 0
+ * [ b3 | b2 | b1 | b0 ]
+ *
+ * If this value is stored into local memory on a Little-Endian system
+ * it will show up correctly in local memory as:
+ *
+ * ( ..., b0, b1, b2, b3, ... )
+ *
+ * But on a Big-Endian system, the store will show up in memory
+ * incorrectly swizzled as:
+ *
+ * ( ..., b3, b2, b1, b0, ... )
+ *
+ * So we need to account for this in the reads and writes to the
+ * PCI-E Memory Window below by undoing the register read/write
+ * swizzels.
+ */
+ while (len > 0) {
+ if (dir == T4_MEMORY_READ)
+ *buf++ = le32_to_cpu((__le32)t4_read_reg(adap,
+ mem_base +
+ offset));
+ else
+ t4_write_reg(adap, mem_base + offset,
+ (u32)cpu_to_le32(*buf++));
+ offset += sizeof(__be32);
+ len -= sizeof(__be32);
+
+ /* If we've reached the end of our current window aperture,
+ * move the PCI-E Memory Window on to the next. Note that
+ * doing this here after "len" may be 0 allows us to set up
+ * the PCI-E Memory Window for a possible final residual
+ * transfer below ...
+ */
+ if (offset == mem_aperture) {
+ pos += mem_aperture;
+ offset = 0;
+ t4_write_reg(adap,
+ PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET,
+ win), pos | win_pf);
+ t4_read_reg(adap,
+ PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET,
+ win));
+ }
+ }
+
+ /* If the original transfer had a length which wasn't a multiple of
+ * 32-bits, now's where we need to finish off the transfer of the
+ * residual amount. The PCI-E Memory Window has already been moved
+ * above (if necessary) to cover this final transfer.
+ */
+ if (resid) {
+ union {
+ u32 word;
+ char byte[4];
+ } last;
+ unsigned char *bp;
+ int i;
+
+ if (dir == T4_MEMORY_READ) {
+ last.word = le32_to_cpu((__le32)t4_read_reg(adap,
+ mem_base +
+ offset));
+ for (bp = (unsigned char *)buf, i = resid; i < 4; i++)
+ bp[i] = last.byte[i];
+ } else {
+ last.word = *buf;
+ for (i = resid; i < 4; i++)
+ last.byte[i] = 0;
+ t4_write_reg(adap, mem_base + offset,
+ (u32)cpu_to_le32(last.word));
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * t4_memory_rw_mtype -read/write EDC 0, EDC 1 or MC via PCIE memory window
+ * @adap: the adapter
+ * @win: PCI-E Memory Window to use
+ * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
+ * @maddr: address within indicated memory type
+ * @len: amount of memory to transfer
+ * @hbuf: host memory buffer
+ * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
+ *
+ * Reads/writes adapter memory using t4_memory_rw_addr(). This routine
+ * provides an (memory type, address within memory type) interface.
+ */
+int t4_memory_rw_mtype(struct adapter *adap, int win, int mtype, u32 maddr,
+ u32 len, void *hbuf, int dir)
+{
+ u32 mtype_offset;
+ u32 edc_size, mc_size;
+
+ /* Offset into the region of memory which is being accessed
+ * MEM_EDC0 = 0
+ * MEM_EDC1 = 1
+ * MEM_MC = 2 -- MEM_MC for chips with only 1 memory controller
+ * MEM_MC1 = 3 -- for chips with 2 memory controllers (e.g. T5)
+ */
+ edc_size = G_EDRAM0_SIZE(t4_read_reg(adap, A_MA_EDRAM0_BAR));
+ if (mtype != MEM_MC1) {
+ mtype_offset = (mtype * (edc_size * 1024 * 1024));
+ } else {
+ mc_size = G_EXT_MEM0_SIZE(t4_read_reg(adap,
+ A_MA_EXT_MEMORY0_BAR));
+ mtype_offset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;
+ }
+
+ return t4_memory_rw_addr(adap, win,
+ mtype_offset + maddr, len,
+ hbuf, dir);
+}