-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2014-2017 Chelsio Communications.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Chelsio Communications nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2014-2018 Chelsio Communications.
+ * All rights reserved.
*/
#include <netinet/in.h>
#include <rte_eal.h>
#include <rte_alarm.h>
#include <rte_ether.h>
-#include <rte_ethdev_driver.h>
+#include <ethdev_driver.h>
#include <rte_malloc.h>
#include <rte_random.h>
#include <rte_dev.h>
#include "t4_regs_values.h"
#include "t4fw_interface.h"
-static void init_link_config(struct link_config *lc, unsigned int pcaps,
- unsigned int acaps);
-
/**
* t4_read_mtu_tbl - returns the values in the HW path MTU table
* @adap: the adapter
u32 mbox_addr)
{
for ( ; nflit; nflit--, mbox_addr += 8)
- *rpl++ = htobe64(t4_read_reg64(adap, mbox_addr));
+ *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr));
}
/*
return -EINVAL;
}
- bzero(p, size);
+ memset(p, 0, size);
memcpy(p, (const __be64 *)cmd, size);
/*
return 0;
}
+/**
+ * t4_get_pfres - retrieve VF resource limits
+ * @adapter: the adapter
+ *
+ * Retrieves configured resource limits and capabilities for a physical
+ * function. The results are stored in @adapter->pfres.
+ */
+int t4_get_pfres(struct adapter *adapter)
+{
+ struct pf_resources *pfres = &adapter->params.pfres;
+ struct fw_pfvf_cmd cmd, rpl;
+ u32 word;
+ int v;
+
+ /*
+ * Execute PFVF Read command to get VF resource limits; bail out early
+ * with error on command failure.
+ */
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PFVF_CMD) |
+ F_FW_CMD_REQUEST |
+ F_FW_CMD_READ |
+ V_FW_PFVF_CMD_PFN(adapter->pf) |
+ V_FW_PFVF_CMD_VFN(0));
+ cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
+ v = t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &rpl);
+ if (v != FW_SUCCESS)
+ return v;
+
+ /*
+ * Extract PF resource limits and return success.
+ */
+ word = be32_to_cpu(rpl.niqflint_niq);
+ pfres->niqflint = G_FW_PFVF_CMD_NIQFLINT(word);
+
+ word = be32_to_cpu(rpl.type_to_neq);
+ pfres->neq = G_FW_PFVF_CMD_NEQ(word);
+
+ word = be32_to_cpu(rpl.r_caps_to_nethctrl);
+ pfres->nethctrl = G_FW_PFVF_CMD_NETHCTRL(word);
+
+ return 0;
+}
+
/* serial flash and firmware constants and flash config file constants */
enum {
SF_ATTEMPTS = 10, /* max retries for SF operations */
G_FW_HDR_FW_VER_BUILD(adapter->params.er_vers));
}
-#define ADVERT_MASK (V_FW_PORT_CAP32_SPEED(M_FW_PORT_CAP32_SPEED) | \
- FW_PORT_CAP32_ANEG)
-/**
- * fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits
- * @caps16: a 16-bit Port Capabilities value
- *
- * Returns the equivalent 32-bit Port Capabilities value.
- */
-static fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16)
-{
- fw_port_cap32_t caps32 = 0;
-
-#define CAP16_TO_CAP32(__cap) \
- do { \
- if (caps16 & FW_PORT_CAP_##__cap) \
- caps32 |= FW_PORT_CAP32_##__cap; \
- } while (0)
-
- CAP16_TO_CAP32(SPEED_100M);
- CAP16_TO_CAP32(SPEED_1G);
- CAP16_TO_CAP32(SPEED_25G);
- CAP16_TO_CAP32(SPEED_10G);
- CAP16_TO_CAP32(SPEED_40G);
- CAP16_TO_CAP32(SPEED_100G);
- CAP16_TO_CAP32(FC_RX);
- CAP16_TO_CAP32(FC_TX);
- CAP16_TO_CAP32(ANEG);
- CAP16_TO_CAP32(MDIX);
- CAP16_TO_CAP32(MDIAUTO);
- CAP16_TO_CAP32(FEC_RS);
- CAP16_TO_CAP32(FEC_BASER_RS);
- CAP16_TO_CAP32(802_3_PAUSE);
- CAP16_TO_CAP32(802_3_ASM_DIR);
-
-#undef CAP16_TO_CAP32
-
- return caps32;
-}
-
-/**
- * fwcaps32_to_caps16 - convert 32-bit Port Capabilities to 16-bits
- * @caps32: a 32-bit Port Capabilities value
- *
- * Returns the equivalent 16-bit Port Capabilities value. Note that
- * not all 32-bit Port Capabilities can be represented in the 16-bit
- * Port Capabilities and some fields/values may not make it.
- */
-static fw_port_cap16_t fwcaps32_to_caps16(fw_port_cap32_t caps32)
-{
- fw_port_cap16_t caps16 = 0;
-
-#define CAP32_TO_CAP16(__cap) \
- do { \
- if (caps32 & FW_PORT_CAP32_##__cap) \
- caps16 |= FW_PORT_CAP_##__cap; \
- } while (0)
-
- CAP32_TO_CAP16(SPEED_100M);
- CAP32_TO_CAP16(SPEED_1G);
- CAP32_TO_CAP16(SPEED_10G);
- CAP32_TO_CAP16(SPEED_25G);
- CAP32_TO_CAP16(SPEED_40G);
- CAP32_TO_CAP16(SPEED_100G);
- CAP32_TO_CAP16(FC_RX);
- CAP32_TO_CAP16(FC_TX);
- CAP32_TO_CAP16(802_3_PAUSE);
- CAP32_TO_CAP16(802_3_ASM_DIR);
- CAP32_TO_CAP16(ANEG);
- CAP32_TO_CAP16(MDIX);
- CAP32_TO_CAP16(MDIAUTO);
- CAP32_TO_CAP16(FEC_RS);
- CAP32_TO_CAP16(FEC_BASER_RS);
-
-#undef CAP32_TO_CAP16
-
- return caps16;
-}
-
-/* Translate Firmware Pause specification to Common Code */
-static inline enum cc_pause fwcap_to_cc_pause(fw_port_cap32_t fw_pause)
-{
- enum cc_pause cc_pause = 0;
-
- if (fw_pause & FW_PORT_CAP32_FC_RX)
- cc_pause |= PAUSE_RX;
- if (fw_pause & FW_PORT_CAP32_FC_TX)
- cc_pause |= PAUSE_TX;
-
- return cc_pause;
-}
-
-/* Translate Common Code Pause Frame specification into Firmware */
-static inline fw_port_cap32_t cc_to_fwcap_pause(enum cc_pause cc_pause)
-{
- fw_port_cap32_t fw_pause = 0;
-
- if (cc_pause & PAUSE_RX)
- fw_pause |= FW_PORT_CAP32_FC_RX;
- if (cc_pause & PAUSE_TX)
- fw_pause |= FW_PORT_CAP32_FC_TX;
-
- return fw_pause;
-}
-
-/* Translate Firmware Forward Error Correction specification to Common Code */
-static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec)
-{
- enum cc_fec cc_fec = 0;
-
- if (fw_fec & FW_PORT_CAP32_FEC_RS)
- cc_fec |= FEC_RS;
- if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS)
- cc_fec |= FEC_BASER_RS;
-
- return cc_fec;
-}
-
-/* Translate Common Code Forward Error Correction specification to Firmware */
-static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec)
-{
- fw_port_cap32_t fw_fec = 0;
-
- if (cc_fec & FEC_RS)
- fw_fec |= FW_PORT_CAP32_FEC_RS;
- if (cc_fec & FEC_BASER_RS)
- fw_fec |= FW_PORT_CAP32_FEC_BASER_RS;
-
- return fw_fec;
-}
-
/**
- * t4_link_l1cfg - apply link configuration to MAC/PHY
- * @adapter: the adapter
- * @mbox: the Firmware Mailbox to use
- * @port: the Port ID
- * @lc: the Port's Link Configuration
+ * t4_link_l1cfg_core - apply link configuration to MAC/PHY
+ * @pi: the port info
+ * @caps: link capabilities to configure
+ * @sleep_ok: if true we may sleep while awaiting command completion
*
* Set up a port's MAC and PHY according to a desired link configuration.
* - If the PHY can auto-negotiate first decide what to advertise, then
* - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
* otherwise do it later based on the outcome of auto-negotiation.
*/
-int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
- struct link_config *lc)
+int t4_link_l1cfg_core(struct port_info *pi, u32 caps, u8 sleep_ok)
{
- unsigned int fw_mdi = V_FW_PORT_CAP32_MDI(FW_PORT_CAP32_MDI_AUTO);
- unsigned int fw_caps = adap->params.fw_caps_support;
- fw_port_cap32_t fw_fc, cc_fec, fw_fec, rcap;
+ struct link_config *lc = &pi->link_cfg;
+ struct adapter *adap = pi->adapter;
struct fw_port_cmd cmd;
+ int ret;
- lc->link_ok = 0;
-
- fw_fc = cc_to_fwcap_pause(lc->requested_fc);
-
- /* Convert Common Code Forward Error Control settings into the
- * Firmware's API. If the current Requested FEC has "Automatic"
- * (IEEE 802.3) specified, then we use whatever the Firmware
- * sent us as part of it's IEEE 802.3-based interpratation of
- * the Transceiver Module EPROM FEC parameters. Otherwise we
- * use whatever is in the current Requested FEC settings.
- */
- if (lc->requested_fec & FEC_AUTO)
- cc_fec = lc->auto_fec;
- else
- cc_fec = lc->requested_fec;
- fw_fec = cc_to_fwcap_fec(cc_fec);
-
- /* Figure out what our Requested Port Capabilities are going to be.
- */
- if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) {
- rcap = (lc->pcaps & ADVERT_MASK) | fw_fc | fw_fec;
- lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
- lc->fec = cc_fec;
- } else if (lc->autoneg == AUTONEG_DISABLE) {
- rcap = lc->requested_speed | fw_fc | fw_fec | fw_mdi;
- lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
- lc->fec = cc_fec;
- } else {
- rcap = lc->acaps | fw_fc | fw_fec | fw_mdi;
- }
-
- /* And send that on to the Firmware ...
- */
memset(&cmd, 0, sizeof(cmd));
cmd.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) |
F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
- V_FW_PORT_CMD_PORTID(port));
+ V_FW_PORT_CMD_PORTID(pi->port_id));
cmd.action_to_len16 =
- cpu_to_be32(V_FW_PORT_CMD_ACTION(fw_caps == FW_CAPS16 ?
- FW_PORT_ACTION_L1_CFG :
- FW_PORT_ACTION_L1_CFG32) |
+ cpu_to_be32(V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG32) |
FW_LEN16(cmd));
- if (fw_caps == FW_CAPS16)
- cmd.u.l1cfg.rcap = cpu_to_be32(fwcaps32_to_caps16(rcap));
+ cmd.u.l1cfg32.rcap32 = cpu_to_be32(caps);
+
+ if (sleep_ok)
+ ret = t4_wr_mbox(adap, adap->mbox, &cmd, sizeof(cmd), NULL);
else
- cmd.u.l1cfg32.rcap32 = cpu_to_be32(rcap);
+ ret = t4_wr_mbox_ns(adap, adap->mbox, &cmd, sizeof(cmd), NULL);
- return t4_wr_mbox(adap, mbox, &cmd, sizeof(cmd), NULL);
+ if (ret == FW_SUCCESS)
+ lc->link_caps = caps;
+ else
+ dev_err(adap,
+ "Requested Port Capabilities %#x rejected, error %d\n",
+ caps, ret);
+
+ return ret;
}
/**
int t4_alloc_vi_func(struct adapter *adap, unsigned int mbox,
unsigned int port, unsigned int pf, unsigned int vf,
unsigned int nmac, u8 *mac, unsigned int *rss_size,
- unsigned int portfunc, unsigned int idstype)
+ unsigned int portfunc, unsigned int idstype,
+ u8 *vivld, u8 *vin)
{
int ret;
struct fw_vi_cmd c;
}
if (rss_size)
*rss_size = G_FW_VI_CMD_RSSSIZE(be16_to_cpu(c.norss_rsssize));
+ if (vivld)
+ *vivld = G_FW_VI_CMD_VFVLD(be32_to_cpu(c.alloc_to_len16));
+ if (vin)
+ *vin = G_FW_VI_CMD_VIN(be32_to_cpu(c.alloc_to_len16));
return G_FW_VI_CMD_VIID(cpu_to_be16(c.type_to_viid));
}
*/
int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port,
unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac,
- unsigned int *rss_size)
+ unsigned int *rss_size, u8 *vivld, u8 *vin)
{
return t4_alloc_vi_func(adap, mbox, port, pf, vf, nmac, mac, rss_size,
- FW_VI_FUNC_ETH, 0);
+ FW_VI_FUNC_ETH, 0, vivld, vin);
}
/**
return t4vf_wr_mbox(adap, &c, sizeof(c), NULL);
}
+/**
+ * t4_alloc_raw_mac_filt - Adds a raw mac entry in mps tcam
+ * @adap: the adapter
+ * @viid: the VI id
+ * @mac: the MAC address
+ * @mask: the mask
+ * @idx: index at which to add this entry
+ * @port_id: the port index
+ * @lookup_type: MAC address for inner (1) or outer (0) header
+ * @sleep_ok: call is allowed to sleep
+ *
+ * Adds the mac entry at the specified index using raw mac interface.
+ *
+ * Returns a negative error number or the allocated index for this mac.
+ */
+int t4_alloc_raw_mac_filt(struct adapter *adap, unsigned int viid,
+ const u8 *addr, const u8 *mask, unsigned int idx,
+ u8 lookup_type, u8 port_id, bool sleep_ok)
+{
+ int ret = 0;
+ struct fw_vi_mac_cmd c;
+ struct fw_vi_mac_raw *p = &c.u.raw;
+ u32 val;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
+ V_FW_VI_MAC_CMD_VIID(viid));
+ val = V_FW_CMD_LEN16(1) |
+ V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_RAW);
+ c.freemacs_to_len16 = cpu_to_be32(val);
+
+ /* Specify that this is an inner mac address */
+ p->raw_idx_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_RAW_IDX(idx));
+
+ /* Lookup Type. Outer header: 0, Inner header: 1 */
+ p->data0_pkd = cpu_to_be32(V_DATALKPTYPE(lookup_type) |
+ V_DATAPORTNUM(port_id));
+ /* Lookup mask and port mask */
+ p->data0m_pkd = cpu_to_be64(V_DATALKPTYPE(M_DATALKPTYPE) |
+ V_DATAPORTNUM(M_DATAPORTNUM));
+
+ /* Copy the address and the mask */
+ memcpy((u8 *)&p->data1[0] + 2, addr, ETHER_ADDR_LEN);
+ memcpy((u8 *)&p->data1m[0] + 2, mask, ETHER_ADDR_LEN);
+
+ ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
+ if (ret == 0) {
+ ret = G_FW_VI_MAC_CMD_RAW_IDX(be32_to_cpu(p->raw_idx_pkd));
+ if (ret != (int)idx)
+ ret = -ENOMEM;
+ }
+
+ return ret;
+}
+
+/**
+ * t4_free_raw_mac_filt - Frees a raw mac entry in mps tcam
+ * @adap: the adapter
+ * @viid: the VI id
+ * @addr: the MAC address
+ * @mask: the mask
+ * @idx: index of the entry in mps tcam
+ * @lookup_type: MAC address for inner (1) or outer (0) header
+ * @port_id: the port index
+ * @sleep_ok: call is allowed to sleep
+ *
+ * Removes the mac entry at the specified index using raw mac interface.
+ *
+ * Returns a negative error number on failure.
+ */
+int t4_free_raw_mac_filt(struct adapter *adap, unsigned int viid,
+ const u8 *addr, const u8 *mask, unsigned int idx,
+ u8 lookup_type, u8 port_id, bool sleep_ok)
+{
+ struct fw_vi_mac_cmd c;
+ struct fw_vi_mac_raw *p = &c.u.raw;
+ u32 raw;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_WRITE |
+ V_FW_CMD_EXEC(0) |
+ V_FW_VI_MAC_CMD_VIID(viid));
+ raw = V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_RAW);
+ c.freemacs_to_len16 = cpu_to_be32(V_FW_VI_MAC_CMD_FREEMACS(0U) |
+ raw |
+ V_FW_CMD_LEN16(1));
+
+ p->raw_idx_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_RAW_IDX(idx) |
+ FW_VI_MAC_ID_BASED_FREE);
+
+ /* Lookup Type. Outer header: 0, Inner header: 1 */
+ p->data0_pkd = cpu_to_be32(V_DATALKPTYPE(lookup_type) |
+ V_DATAPORTNUM(port_id));
+ /* Lookup mask and port mask */
+ p->data0m_pkd = cpu_to_be64(V_DATALKPTYPE(M_DATALKPTYPE) |
+ V_DATAPORTNUM(M_DATAPORTNUM));
+
+ /* Copy the address and the mask */
+ memcpy((u8 *)&p->data1[0] + 2, addr, ETHER_ADDR_LEN);
+ memcpy((u8 *)&p->data1m[0] + 2, mask, ETHER_ADDR_LEN);
+
+ return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
+}
+
/**
* t4_change_mac - modifies the exact-match filter for a MAC address
* @adap: the adapter
return reason[link_down_rc];
}
+static u32 t4_speed_to_fwcap(u32 speed)
+{
+ switch (speed) {
+ case 100000:
+ return FW_PORT_CAP32_SPEED_100G;
+ case 50000:
+ return FW_PORT_CAP32_SPEED_50G;
+ case 40000:
+ return FW_PORT_CAP32_SPEED_40G;
+ case 25000:
+ return FW_PORT_CAP32_SPEED_25G;
+ case 10000:
+ return FW_PORT_CAP32_SPEED_10G;
+ case 1000:
+ return FW_PORT_CAP32_SPEED_1G;
+ case 100:
+ return FW_PORT_CAP32_SPEED_100M;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
/* Return the highest speed set in the port capabilities, in Mb/s. */
-static unsigned int fwcap_to_speed(fw_port_cap32_t caps)
+unsigned int t4_fwcap_to_speed(u32 caps)
{
#define TEST_SPEED_RETURN(__caps_speed, __speed) \
do { \
return 0;
}
+static void t4_set_link_autoneg_speed(struct port_info *pi, u32 *new_caps)
+{
+ struct link_config *lc = &pi->link_cfg;
+ u32 caps = *new_caps;
+
+ caps &= ~V_FW_PORT_CAP32_SPEED(M_FW_PORT_CAP32_SPEED);
+ caps |= G_FW_PORT_CAP32_SPEED(lc->acaps);
+
+ *new_caps = caps;
+}
+
+int t4_set_link_speed(struct port_info *pi, u32 speed, u32 *new_caps)
+{
+ u32 fw_speed_cap = t4_speed_to_fwcap(speed);
+ struct link_config *lc = &pi->link_cfg;
+ u32 caps = *new_caps;
+
+ if (!(lc->pcaps & fw_speed_cap))
+ return -EOPNOTSUPP;
+
+ caps &= ~V_FW_PORT_CAP32_SPEED(M_FW_PORT_CAP32_SPEED);
+ caps |= fw_speed_cap;
+
+ *new_caps = caps;
+
+ return 0;
+}
+
+int t4_set_link_pause(struct port_info *pi, u8 autoneg, u8 pause_tx,
+ u8 pause_rx, u32 *new_caps)
+{
+ struct link_config *lc = &pi->link_cfg;
+ u32 caps = *new_caps;
+ u32 max_speed;
+
+ max_speed = t4_fwcap_to_speed(lc->link_caps);
+
+ if (autoneg) {
+ if (!(lc->pcaps & FW_PORT_CAP32_ANEG))
+ return -EINVAL;
+
+ caps |= FW_PORT_CAP32_ANEG;
+ t4_set_link_autoneg_speed(pi, &caps);
+ } else {
+ if (!max_speed)
+ max_speed = t4_fwcap_to_speed(lc->acaps);
+
+ caps &= ~FW_PORT_CAP32_ANEG;
+ t4_set_link_speed(pi, max_speed, &caps);
+ }
+
+ if (lc->pcaps & FW_PORT_CAP32_MDIAUTO)
+ caps |= V_FW_PORT_CAP32_MDI(FW_PORT_CAP32_MDI_AUTO);
+
+ caps &= ~V_FW_PORT_CAP32_FC(M_FW_PORT_CAP32_FC);
+ caps &= ~V_FW_PORT_CAP32_802_3(M_FW_PORT_CAP32_802_3);
+ if (pause_tx && pause_rx) {
+ caps |= FW_PORT_CAP32_FC_TX | FW_PORT_CAP32_FC_RX;
+ if (lc->pcaps & FW_PORT_CAP32_802_3_PAUSE)
+ caps |= FW_PORT_CAP32_802_3_PAUSE;
+ } else if (pause_tx) {
+ caps |= FW_PORT_CAP32_FC_TX;
+ if (lc->pcaps & FW_PORT_CAP32_802_3_ASM_DIR)
+ caps |= FW_PORT_CAP32_802_3_ASM_DIR;
+ } else if (pause_rx) {
+ caps |= FW_PORT_CAP32_FC_RX;
+ if (lc->pcaps & FW_PORT_CAP32_802_3_PAUSE)
+ caps |= FW_PORT_CAP32_802_3_PAUSE;
+
+ if (lc->pcaps & FW_PORT_CAP32_802_3_ASM_DIR)
+ caps |= FW_PORT_CAP32_802_3_ASM_DIR;
+ }
+
+ *new_caps = caps;
+
+ return 0;
+}
+
+int t4_set_link_fec(struct port_info *pi, u8 fec_rs, u8 fec_baser,
+ u8 fec_none, u32 *new_caps)
+{
+ struct link_config *lc = &pi->link_cfg;
+ u32 max_speed, caps = *new_caps;
+
+ if (!(lc->pcaps & V_FW_PORT_CAP32_FEC(M_FW_PORT_CAP32_FEC)))
+ return -EOPNOTSUPP;
+
+ /* Link might be down. In that case consider the max
+ * speed advertised
+ */
+ max_speed = t4_fwcap_to_speed(lc->link_caps);
+ if (!max_speed)
+ max_speed = t4_fwcap_to_speed(lc->acaps);
+
+ caps &= ~V_FW_PORT_CAP32_FEC(M_FW_PORT_CAP32_FEC);
+ if (fec_rs) {
+ switch (max_speed) {
+ case 100000:
+ case 25000:
+ caps |= FW_PORT_CAP32_FEC_RS;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ }
+
+ if (fec_baser) {
+ switch (max_speed) {
+ case 50000:
+ case 25000:
+ caps |= FW_PORT_CAP32_FEC_BASER_RS;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ }
+
+ if (fec_none)
+ caps |= FW_PORT_CAP32_FEC_NO_FEC;
+
+ if (!(caps & V_FW_PORT_CAP32_FEC(M_FW_PORT_CAP32_FEC))) {
+ /* No explicit encoding is requested.
+ * So, default back to AUTO.
+ */
+ switch (max_speed) {
+ case 100000:
+ caps |= FW_PORT_CAP32_FEC_RS |
+ FW_PORT_CAP32_FEC_NO_FEC;
+ break;
+ case 50000:
+ caps |= FW_PORT_CAP32_FEC_BASER_RS |
+ FW_PORT_CAP32_FEC_NO_FEC;
+ break;
+ case 25000:
+ caps |= FW_PORT_CAP32_FEC_RS |
+ FW_PORT_CAP32_FEC_BASER_RS |
+ FW_PORT_CAP32_FEC_NO_FEC;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ }
+
+ *new_caps = caps;
+
+ return 0;
+}
+
/**
* t4_handle_get_port_info - process a FW reply message
* @pi: the port info
static void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
{
const struct fw_port_cmd *cmd = (const void *)rpl;
- int action = G_FW_PORT_CMD_ACTION(be32_to_cpu(cmd->action_to_len16));
- fw_port_cap32_t pcaps, acaps, linkattr;
+ u8 link_ok, link_down_rc, mod_type, port_type;
+ u32 action, pcaps, acaps, link_caps, lstatus;
struct link_config *lc = &pi->link_cfg;
struct adapter *adapter = pi->adapter;
- enum fw_port_module_type mod_type;
- enum fw_port_type port_type;
- unsigned int speed, fc, fec;
- int link_ok, linkdnrc;
+ u8 mod_changed = 0;
/* Extract the various fields from the Port Information message.
*/
- switch (action) {
- case FW_PORT_ACTION_GET_PORT_INFO: {
- u32 lstatus = be32_to_cpu(cmd->u.info.lstatus_to_modtype);
-
- link_ok = (lstatus & F_FW_PORT_CMD_LSTATUS) != 0;
- linkdnrc = G_FW_PORT_CMD_LINKDNRC(lstatus);
- port_type = G_FW_PORT_CMD_PTYPE(lstatus);
- mod_type = G_FW_PORT_CMD_MODTYPE(lstatus);
- pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.pcap));
- acaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.acap));
-
- /* Unfortunately the format of the Link Status in the old
- * 16-bit Port Information message isn't the same as the
- * 16-bit Port Capabilities bitfield used everywhere else ...
- */
- linkattr = 0;
- if (lstatus & F_FW_PORT_CMD_RXPAUSE)
- linkattr |= FW_PORT_CAP32_FC_RX;
- if (lstatus & F_FW_PORT_CMD_TXPAUSE)
- linkattr |= FW_PORT_CAP32_FC_TX;
- if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M))
- linkattr |= FW_PORT_CAP32_SPEED_100M;
- if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G))
- linkattr |= FW_PORT_CAP32_SPEED_1G;
- if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
- linkattr |= FW_PORT_CAP32_SPEED_10G;
- if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_25G))
- linkattr |= FW_PORT_CAP32_SPEED_25G;
- if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G))
- linkattr |= FW_PORT_CAP32_SPEED_40G;
- if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100G))
- linkattr |= FW_PORT_CAP32_SPEED_100G;
-
- break;
- }
-
- case FW_PORT_ACTION_GET_PORT_INFO32: {
- u32 lstatus32 =
- be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32);
-
- link_ok = (lstatus32 & F_FW_PORT_CMD_LSTATUS32) != 0;
- linkdnrc = G_FW_PORT_CMD_LINKDNRC32(lstatus32);
- port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32);
- mod_type = G_FW_PORT_CMD_MODTYPE32(lstatus32);
- pcaps = be32_to_cpu(cmd->u.info32.pcaps32);
- acaps = be32_to_cpu(cmd->u.info32.acaps32);
- linkattr = be32_to_cpu(cmd->u.info32.linkattr32);
- break;
- }
-
- default:
+ action = be32_to_cpu(cmd->action_to_len16);
+ if (G_FW_PORT_CMD_ACTION(action) != FW_PORT_ACTION_GET_PORT_INFO32) {
dev_warn(adapter, "Handle Port Information: Bad Command/Action %#x\n",
- be32_to_cpu(cmd->action_to_len16));
+ action);
return;
}
- fec = fwcap_to_cc_fec(acaps);
-
- fc = fwcap_to_cc_pause(linkattr);
- speed = fwcap_to_speed(linkattr);
-
- if (mod_type != pi->mod_type) {
- lc->auto_fec = fec;
- pi->port_type = port_type;
- pi->mod_type = mod_type;
- t4_os_portmod_changed(adapter, pi->port_id);
+ lstatus = be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32);
+ link_ok = (lstatus & F_FW_PORT_CMD_LSTATUS32) ? 1 : 0;
+ link_down_rc = G_FW_PORT_CMD_LINKDNRC32(lstatus);
+ port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus);
+ mod_type = G_FW_PORT_CMD_MODTYPE32(lstatus);
+
+ pcaps = be32_to_cpu(cmd->u.info32.pcaps32);
+ acaps = be32_to_cpu(cmd->u.info32.acaps32);
+ link_caps = be32_to_cpu(cmd->u.info32.linkattr32);
+
+ if (mod_type != lc->mod_type) {
+ t4_init_link_config(pi, pcaps, acaps, lc->mdio_addr,
+ port_type, mod_type);
+ t4_os_portmod_changed(adapter, pi->pidx);
+ mod_changed = 1;
}
- if (link_ok != lc->link_ok || speed != lc->speed ||
- fc != lc->fc || fec != lc->fec) { /* something changed */
+ if (link_ok != lc->link_ok || acaps != lc->acaps ||
+ link_caps != lc->link_caps) { /* something changed */
if (!link_ok && lc->link_ok) {
- lc->link_down_rc = linkdnrc;
+ lc->link_down_rc = link_down_rc;
dev_warn(adap, "Port %d link down, reason: %s\n",
- pi->tx_chan, t4_link_down_rc_str(linkdnrc));
+ pi->port_id,
+ t4_link_down_rc_str(link_down_rc));
}
lc->link_ok = link_ok;
- lc->speed = speed;
- lc->fc = fc;
- lc->fec = fec;
- lc->pcaps = pcaps;
- lc->acaps = acaps & ADVERT_MASK;
-
- if (lc->acaps & FW_PORT_CAP32_ANEG) {
- lc->autoneg = AUTONEG_ENABLE;
- } else {
- /* When Autoneg is disabled, user needs to set
- * single speed.
- * Similar to cxgb4_ethtool.c: set_link_ksettings
- */
- lc->acaps = 0;
- lc->requested_speed = fwcap_to_speed(acaps);
- lc->autoneg = AUTONEG_DISABLE;
- }
+ lc->acaps = acaps;
+ lc->link_caps = link_caps;
+ t4_os_link_changed(adapter, pi->pidx);
+ }
+
+ if (mod_changed) {
+ u32 mod_caps = lc->admin_caps;
+ int ret;
+
+ ret = t4_link_l1cfg_ns(pi, mod_caps);
+ if (ret != FW_SUCCESS)
+ dev_warn(adapter,
+ "Attempt to update new Transceiver Module settings %#x failed with error: %d\n",
+ mod_caps, ret);
}
}
+/**
+ * t4_ctrl_eq_free - free a control egress queue
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF owning the queue
+ * @vf: the VF owning the queue
+ * @eqid: egress queue id
+ *
+ * Frees a control egress queue.
+ */
+int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int eqid)
+{
+ struct fw_eq_ctrl_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_CTRL_CMD) |
+ F_FW_CMD_REQUEST | F_FW_CMD_EXEC |
+ V_FW_EQ_CTRL_CMD_PFN(pf) |
+ V_FW_EQ_CTRL_CMD_VFN(vf));
+ c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_CTRL_CMD_FREE | FW_LEN16(c));
+ c.cmpliqid_eqid = cpu_to_be32(V_FW_EQ_CTRL_CMD_EQID(eqid));
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
/**
* t4_handle_fw_rpl - process a FW reply message
* @adap: the adapter
unsigned int action =
G_FW_PORT_CMD_ACTION(be32_to_cpu(p->action_to_len16));
- if (opcode == FW_PORT_CMD &&
- (action == FW_PORT_ACTION_GET_PORT_INFO ||
- action == FW_PORT_ACTION_GET_PORT_INFO32)) {
+ if (opcode == FW_PORT_CMD && action == FW_PORT_ACTION_GET_PORT_INFO32) {
/* link/module state change message */
int chan = G_FW_PORT_CMD_PORTID(be32_to_cpu(p->op_to_portid));
struct port_info *pi = NULL;
struct link_config *lc = &pi->link_cfg;
lc->link_ok = 0;
- lc->requested_speed = 0;
- lc->requested_fc = 0;
- lc->speed = 0;
- lc->fc = 0;
+ lc->link_down_rc = 0;
+ lc->link_caps = 0;
}
/**
- * init_link_config - initialize a link's SW state
- * @lc: structure holding the link state
+ * t4_init_link_config - initialize a link's SW state
+ * @pi: the port info
* @pcaps: link Port Capabilities
* @acaps: link current Advertised Port Capabilities
+ * @mdio_addr : address of the PHY
+ * @port_type : firmware port type
+ * @mod_type : firmware module type
*
* Initializes the SW state maintained for each link, including the link's
* capabilities and default speed/flow-control/autonegotiation settings.
*/
-static void init_link_config(struct link_config *lc, fw_port_cap32_t pcaps,
- fw_port_cap32_t acaps)
+void t4_init_link_config(struct port_info *pi, u32 pcaps, u32 acaps,
+ u8 mdio_addr, u8 port_type, u8 mod_type)
{
+ u8 fec_rs = 0, fec_baser = 0, fec_none = 0;
+ struct link_config *lc = &pi->link_cfg;
+
lc->pcaps = pcaps;
- lc->requested_speed = 0;
- lc->speed = 0;
- lc->requested_fc = 0;
- lc->fc = 0;
+ lc->acaps = acaps;
+ lc->admin_caps = acaps;
+ lc->link_caps = 0;
- /**
- * For Forward Error Control, we default to whatever the Firmware
- * tells us the Link is currently advertising.
- */
- lc->auto_fec = fwcap_to_cc_fec(acaps);
- lc->requested_fec = FEC_AUTO;
- lc->fec = lc->auto_fec;
-
- if (lc->pcaps & FW_PORT_CAP32_ANEG) {
- lc->acaps = lc->pcaps & ADVERT_MASK;
- lc->autoneg = AUTONEG_ENABLE;
- lc->requested_fc |= PAUSE_AUTONEG;
- } else {
- lc->acaps = 0;
- lc->autoneg = AUTONEG_DISABLE;
+ lc->mdio_addr = mdio_addr;
+ lc->port_type = port_type;
+ lc->mod_type = mod_type;
+
+ lc->link_ok = 0;
+ lc->link_down_rc = 0;
+
+ /* Turn Tx and Rx pause off by default */
+ lc->admin_caps &= ~V_FW_PORT_CAP32_FC(M_FW_PORT_CAP32_FC);
+ lc->admin_caps &= ~V_FW_PORT_CAP32_802_3(M_FW_PORT_CAP32_802_3);
+ if (lc->pcaps & FW_PORT_CAP32_FORCE_PAUSE)
+ lc->admin_caps &= ~FW_PORT_CAP32_FORCE_PAUSE;
+
+ /* Reset FEC caps to default values */
+ if (lc->pcaps & V_FW_PORT_CAP32_FEC(M_FW_PORT_CAP32_FEC)) {
+ if (lc->acaps & FW_PORT_CAP32_FEC_RS)
+ fec_rs = 1;
+ else if (lc->acaps & FW_PORT_CAP32_FEC_BASER_RS)
+ fec_baser = 1;
+ else
+ fec_none = 1;
+
+ lc->admin_caps &= ~V_FW_PORT_CAP32_FEC(M_FW_PORT_CAP32_FEC);
+ t4_set_link_fec(pi, fec_rs, fec_baser, fec_none,
+ &lc->admin_caps);
+ }
+
+ if (lc->pcaps & FW_PORT_CAP32_FORCE_FEC)
+ lc->admin_caps &= ~FW_PORT_CAP32_FORCE_FEC;
+
+ /* Reset MDI to AUTO */
+ if (lc->pcaps & FW_PORT_CAP32_MDIAUTO) {
+ lc->admin_caps &= ~V_FW_PORT_CAP32_MDI(M_FW_PORT_CAP32_MDI);
+ lc->admin_caps |= V_FW_PORT_CAP32_MDI(FW_PORT_CAP32_MDI_AUTO);
}
}
int t4_get_flash_params(struct adapter *adapter)
{
/*
- * Table for non-Numonix supported flash parts. Numonix parts are left
- * to the preexisting well-tested code. All flash parts have 64KB
- * sectors.
+ * Table for non-standard supported Flash parts. Note, all Flash
+ * parts must have 64KB sectors.
*/
static struct flash_desc supported_flash[] = {
{ 0x00150201, 4 << 20 }, /* Spansion 4MB S25FL032P */
int ret;
u32 flashid = 0;
unsigned int part, manufacturer;
- unsigned int density, size;
+ unsigned int density, size = 0;
/**
* Issue a Read ID Command to the Flash part. We decode supported
if (ret < 0)
return ret;
+ /**
+ * Check to see if it's one of our non-standard supported Flash parts.
+ */
for (part = 0; part < ARRAY_SIZE(supported_flash); part++) {
if (supported_flash[part].vendor_and_model_id == flashid) {
adapter->params.sf_size =
}
}
+ /**
+ * Decode Flash part size. The code below looks repetative with
+ * common encodings, but that's not guaranteed in the JEDEC
+ * specification for the Read JADEC ID command. The only thing that
+ * we're guaranteed by the JADEC specification is where the
+ * Manufacturer ID is in the returned result. After that each
+ * Manufacturer ~could~ encode things completely differently.
+ * Note, all Flash parts must have 64KB sectors.
+ */
manufacturer = flashid & 0xff;
switch (manufacturer) {
case 0x20: { /* Micron/Numonix */
case 0x22:
size = 1 << 28; /* 256MB */
break;
- default:
- dev_err(adapter, "Micron Flash Part has bad size, ID = %#x, Density code = %#x\n",
- flashid, density);
- return -EINVAL;
}
+ break;
+ }
- adapter->params.sf_size = size;
- adapter->params.sf_nsec = size / SF_SEC_SIZE;
+ case 0x9d: { /* ISSI -- Integrated Silicon Solution, Inc. */
+ /**
+ * This Density -> Size decoding table is taken from ISSI
+ * Data Sheets.
+ */
+ density = (flashid >> 16) & 0xff;
+ switch (density) {
+ case 0x16:
+ size = 1 << 25; /* 32MB */
+ break;
+ case 0x17:
+ size = 1 << 26; /* 64MB */
+ break;
+ }
break;
}
- default:
- dev_err(adapter, "Unsupported Flash Part, ID = %#x\n", flashid);
- return -EINVAL;
+
+ case 0xc2: { /* Macronix */
+ /**
+ * This Density -> Size decoding table is taken from Macronix
+ * Data Sheets.
+ */
+ density = (flashid >> 16) & 0xff;
+ switch (density) {
+ case 0x17:
+ size = 1 << 23; /* 8MB */
+ break;
+ case 0x18:
+ size = 1 << 24; /* 16MB */
+ break;
+ }
+ break;
}
+ case 0xef: { /* Winbond */
+ /**
+ * This Density -> Size decoding table is taken from Winbond
+ * Data Sheets.
+ */
+ density = (flashid >> 16) & 0xff;
+ switch (density) {
+ case 0x17:
+ size = 1 << 23; /* 8MB */
+ break;
+ case 0x18:
+ size = 1 << 24; /* 16MB */
+ break;
+ }
+ break;
+ }
+ }
+
+ /* If we didn't recognize the FLASH part, that's no real issue: the
+ * Hardware/Software contract says that Hardware will _*ALWAYS*_
+ * use a FLASH part which is at least 4MB in size and has 64KB
+ * sectors. The unrecognized FLASH part is likely to be much larger
+ * than 4MB, but that's all we really need.
+ */
+ if (size == 0) {
+ dev_warn(adapter,
+ "Unknown Flash Part, ID = %#x, assuming 4MB\n",
+ flashid);
+ size = 1 << 22;
+ }
+
+ /**
+ * Store decoded Flash size and fall through into vetting code.
+ */
+ adapter->params.sf_size = size;
+ adapter->params.sf_nsec = size / SF_SEC_SIZE;
+
found:
/*
* We should reject adapters with FLASHes which are too small. So, emit
adapter->params.arch.mps_rplc_size = 128;
adapter->params.arch.nchan = NCHAN;
adapter->params.arch.vfcount = 128;
+ /* Congestion map is for 4 channels so that
+ * MPS can have 4 priority per port.
+ */
+ adapter->params.arch.cng_ch_bits_log = 2;
break;
case CHELSIO_T6:
adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev);
adapter->params.arch.mps_rplc_size = 256;
adapter->params.arch.nchan = 2;
adapter->params.arch.vfcount = 256;
+ /* Congestion map is for 2 channels so that
+ * MPS can have 8 priority per port.
+ */
+ adapter->params.arch.cng_ch_bits_log = 3;
break;
default:
dev_err(adapter, "%s: Device %d is not supported\n",
*/
int t4_init_tp_params(struct adapter *adap)
{
- int chan;
- u32 v;
+ int chan, ret;
+ u32 param, v;
v = t4_read_reg(adap, A_TP_TIMER_RESOLUTION);
adap->params.tp.tre = G_TIMERRESOLUTION(v);
adap->params.tp.tx_modq[chan] = chan;
/*
- * Cache the adapter's Compressed Filter Mode and global Incress
+ * Cache the adapter's Compressed Filter Mode/Mask and global Ingress
* Configuration.
*/
- t4_read_indirect(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA,
- &adap->params.tp.vlan_pri_map, 1, A_TP_VLAN_PRI_MAP);
+ param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) |
+ V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_FILTER) |
+ V_FW_PARAMS_PARAM_Y(FW_PARAM_DEV_FILTER_MODE_MASK));
+
+ /* Read current value */
+ ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
+ 1, ¶m, &v);
+ if (!ret) {
+ dev_info(adap, "Current filter mode/mask 0x%x:0x%x\n",
+ G_FW_PARAMS_PARAM_FILTER_MODE(v),
+ G_FW_PARAMS_PARAM_FILTER_MASK(v));
+ adap->params.tp.vlan_pri_map =
+ G_FW_PARAMS_PARAM_FILTER_MODE(v);
+ adap->params.tp.filter_mask =
+ G_FW_PARAMS_PARAM_FILTER_MASK(v);
+ } else {
+ dev_info(adap,
+ "Failed to read filter mode/mask via fw api, using indirect-reg-read\n");
+
+ /* In case of older-fw (which doesn't expose the api
+ * FW_PARAM_DEV_FILTER_MODE_MASK) and newer-driver (which uses
+ * the fw api) combination, fall-back to older method of reading
+ * the filter mode from indirect-register
+ */
+ t4_read_indirect(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA,
+ &adap->params.tp.vlan_pri_map, 1,
+ A_TP_VLAN_PRI_MAP);
+
+ /* With the older-fw and newer-driver combination we might run
+ * into an issue when user wants to use hash filter region but
+ * the filter_mask is zero, in this case filter_mask validation
+ * is tough. To avoid that we set the filter_mask same as filter
+ * mode, which will behave exactly as the older way of ignoring
+ * the filter mask validation.
+ */
+ adap->params.tp.filter_mask = adap->params.tp.vlan_pri_map;
+ }
+
t4_read_indirect(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA,
&adap->params.tp.ingress_config, 1,
A_TP_INGRESS_CONFIG);
adap->params.tp.port_shift = t4_filter_field_shift(adap, F_PORT);
adap->params.tp.protocol_shift = t4_filter_field_shift(adap,
F_PROTOCOL);
+ adap->params.tp.ethertype_shift = t4_filter_field_shift(adap,
+ F_ETHERTYPE);
+ adap->params.tp.macmatch_shift = t4_filter_field_shift(adap,
+ F_MACMATCH);
+ adap->params.tp.tos_shift = t4_filter_field_shift(adap, F_TOS);
- /*
- * If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID
- * represents the presense of an Outer VLAN instead of a VNIC ID.
- */
- if ((adap->params.tp.ingress_config & F_VNIC) == 0)
- adap->params.tp.vnic_shift = -1;
+ v = t4_read_reg(adap, LE_3_DB_HASH_MASK_GEN_IPV4_T6_A);
+ adap->params.tp.hash_filter_mask = v;
+ v = t4_read_reg(adap, LE_4_DB_HASH_MASK_GEN_IPV4_T6_A);
+ adap->params.tp.hash_filter_mask |= ((u64)v << 32);
return 0;
}
int t4_port_init(struct adapter *adap, int mbox, int pf, int vf)
{
- unsigned int fw_caps = adap->params.fw_caps_support;
- fw_port_cap32_t pcaps, acaps;
+ u32 param, val, pcaps, acaps;
enum fw_port_type port_type;
struct fw_port_cmd cmd;
+ u8 vivld = 0, vin = 0;
int ret, i, j = 0;
int mdio_addr;
- u32 action;
u8 addr[6];
+ param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) |
+ V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_PORT_CAPS32));
+ val = 1;
+ ret = t4_set_params(adap, mbox, pf, vf, 1, ¶m, &val);
+ if (ret < 0)
+ return ret;
+
memset(&cmd, 0, sizeof(cmd));
for_each_port(adap, i) {
struct port_info *pi = adap2pinfo(adap, i);
unsigned int rss_size = 0;
+ u32 lstatus32;
while ((adap->params.portvec & (1 << j)) == 0)
j++;
- /* If we haven't yet determined whether we're talking to
- * Firmware which knows the new 32-bit Port Capabilities, it's
- * time to find out now. This will also tell new Firmware to
- * send us Port Status Updates using the new 32-bit Port
- * Capabilities version of the Port Information message.
- */
- if (fw_caps == FW_CAPS_UNKNOWN) {
- u32 param, val, caps;
-
- caps = FW_PARAMS_PARAM_PFVF_PORT_CAPS32;
- param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) |
- V_FW_PARAMS_PARAM_X(caps));
- val = 1;
- ret = t4_set_params(adap, mbox, pf, vf, 1, ¶m,
- &val);
- fw_caps = ret == 0 ? FW_CAPS32 : FW_CAPS16;
- adap->params.fw_caps_support = fw_caps;
- }
-
memset(&cmd, 0, sizeof(cmd));
cmd.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) |
F_FW_CMD_REQUEST |
F_FW_CMD_READ |
V_FW_PORT_CMD_PORTID(j));
- action = fw_caps == FW_CAPS16 ? FW_PORT_ACTION_GET_PORT_INFO :
- FW_PORT_ACTION_GET_PORT_INFO32;
- cmd.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION(action) |
+ val = FW_PORT_ACTION_GET_PORT_INFO32;
+ cmd.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION(val) |
FW_LEN16(cmd));
ret = t4_wr_mbox(pi->adapter, mbox, &cmd, sizeof(cmd), &cmd);
if (ret)
return ret;
- /* Extract the various fields from the Port Information message.
+ /* Extract the various fields from the Port Information
+ * message.
*/
- if (fw_caps == FW_CAPS16) {
- u32 lstatus =
- be32_to_cpu(cmd.u.info.lstatus_to_modtype);
-
- port_type = G_FW_PORT_CMD_PTYPE(lstatus);
- mdio_addr = (lstatus & F_FW_PORT_CMD_MDIOCAP) ?
- (int)G_FW_PORT_CMD_MDIOADDR(lstatus) : -1;
- pcaps = be16_to_cpu(cmd.u.info.pcap);
- acaps = be16_to_cpu(cmd.u.info.acap);
- pcaps = fwcaps16_to_caps32(pcaps);
- acaps = fwcaps16_to_caps32(acaps);
- } else {
- u32 lstatus32 =
- be32_to_cpu(cmd.u.info32.lstatus32_to_cbllen32);
-
- port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32);
- mdio_addr = (lstatus32 & F_FW_PORT_CMD_MDIOCAP32) ?
- (int)G_FW_PORT_CMD_MDIOADDR32(lstatus32) :
- -1;
- pcaps = be32_to_cpu(cmd.u.info32.pcaps32);
- acaps = be32_to_cpu(cmd.u.info32.acaps32);
- }
+ lstatus32 = be32_to_cpu(cmd.u.info32.lstatus32_to_cbllen32);
- ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size);
+ port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32);
+ mdio_addr = (lstatus32 & F_FW_PORT_CMD_MDIOCAP32) ?
+ (int)G_FW_PORT_CMD_MDIOADDR32(lstatus32) : -1;
+ pcaps = be32_to_cpu(cmd.u.info32.pcaps32);
+ acaps = be32_to_cpu(cmd.u.info32.acaps32);
+
+ ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size,
+ &vivld, &vin);
if (ret < 0)
return ret;
pi->rss_size = rss_size;
t4_os_set_hw_addr(adap, i, addr);
- pi->port_type = port_type;
- pi->mdio_addr = mdio_addr;
- pi->mod_type = FW_PORT_MOD_TYPE_NA;
+ /* If fw supports returning the VIN as part of FW_VI_CMD,
+ * save the returned values.
+ */
+ if (adap->params.viid_smt_extn_support) {
+ pi->vivld = vivld;
+ pi->vin = vin;
+ } else {
+ /* Retrieve the values from VIID */
+ pi->vivld = G_FW_VIID_VIVLD(pi->viid);
+ pi->vin = G_FW_VIID_VIN(pi->viid);
+ }
- init_link_config(&pi->link_cfg, pcaps, acaps);
+ t4_init_link_config(pi, pcaps, acaps, mdio_addr, port_type,
+ FW_PORT_MOD_TYPE_NA);
j++;
}
return 0;
}
+
+/**
+ * t4_memory_rw_addr - read/write adapter memory via PCIE memory window
+ * @adap: the adapter
+ * @win: PCI-E Memory Window to use
+ * @addr: address within adapter memory
+ * @len: amount of memory to transfer
+ * @hbuf: host memory buffer
+ * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
+ *
+ * Reads/writes an [almost] arbitrary memory region in the firmware: the
+ * firmware memory address and host buffer must be aligned on 32-bit
+ * boudaries; the length may be arbitrary.
+ *
+ * NOTES:
+ * 1. The memory is transferred as a raw byte sequence from/to the
+ * firmware's memory. If this memory contains data structures which
+ * contain multi-byte integers, it's the caller's responsibility to
+ * perform appropriate byte order conversions.
+ *
+ * 2. It is the Caller's responsibility to ensure that no other code
+ * uses the specified PCI-E Memory Window while this routine is
+ * using it. This is typically done via the use of OS-specific
+ * locks, etc.
+ */
+int t4_memory_rw_addr(struct adapter *adap, int win, u32 addr,
+ u32 len, void *hbuf, int dir)
+{
+ u32 pos, offset, resid;
+ u32 win_pf, mem_reg, mem_aperture, mem_base;
+ u32 *buf;
+
+ /* Argument sanity checks ...*/
+ if (addr & 0x3 || (uintptr_t)hbuf & 0x3)
+ return -EINVAL;
+ buf = (u32 *)hbuf;
+
+ /* It's convenient to be able to handle lengths which aren't a
+ * multiple of 32-bits because we often end up transferring files to
+ * the firmware. So we'll handle that by normalizing the length here
+ * and then handling any residual transfer at the end.
+ */
+ resid = len & 0x3;
+ len -= resid;
+
+ /* Each PCI-E Memory Window is programmed with a window size -- or
+ * "aperture" -- which controls the granularity of its mapping onto
+ * adapter memory. We need to grab that aperture in order to know
+ * how to use the specified window. The window is also programmed
+ * with the base address of the Memory Window in BAR0's address
+ * space. For T4 this is an absolute PCI-E Bus Address. For T5
+ * the address is relative to BAR0.
+ */
+ mem_reg = t4_read_reg(adap,
+ PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN,
+ win));
+ mem_aperture = 1 << (G_WINDOW(mem_reg) + X_WINDOW_SHIFT);
+ mem_base = G_PCIEOFST(mem_reg) << X_PCIEOFST_SHIFT;
+
+ win_pf = is_t4(adap->params.chip) ? 0 : V_PFNUM(adap->pf);
+
+ /* Calculate our initial PCI-E Memory Window Position and Offset into
+ * that Window.
+ */
+ pos = addr & ~(mem_aperture - 1);
+ offset = addr - pos;
+
+ /* Set up initial PCI-E Memory Window to cover the start of our
+ * transfer. (Read it back to ensure that changes propagate before we
+ * attempt to use the new value.)
+ */
+ t4_write_reg(adap,
+ PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, win),
+ pos | win_pf);
+ t4_read_reg(adap,
+ PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, win));
+
+ /* Transfer data to/from the adapter as long as there's an integral
+ * number of 32-bit transfers to complete.
+ *
+ * A note on Endianness issues:
+ *
+ * The "register" reads and writes below from/to the PCI-E Memory
+ * Window invoke the standard adapter Big-Endian to PCI-E Link
+ * Little-Endian "swizzel." As a result, if we have the following
+ * data in adapter memory:
+ *
+ * Memory: ... | b0 | b1 | b2 | b3 | ...
+ * Address: i+0 i+1 i+2 i+3
+ *
+ * Then a read of the adapter memory via the PCI-E Memory Window
+ * will yield:
+ *
+ * x = readl(i)
+ * 31 0
+ * [ b3 | b2 | b1 | b0 ]
+ *
+ * If this value is stored into local memory on a Little-Endian system
+ * it will show up correctly in local memory as:
+ *
+ * ( ..., b0, b1, b2, b3, ... )
+ *
+ * But on a Big-Endian system, the store will show up in memory
+ * incorrectly swizzled as:
+ *
+ * ( ..., b3, b2, b1, b0, ... )
+ *
+ * So we need to account for this in the reads and writes to the
+ * PCI-E Memory Window below by undoing the register read/write
+ * swizzels.
+ */
+ while (len > 0) {
+ if (dir == T4_MEMORY_READ)
+ *buf++ = le32_to_cpu((__le32)t4_read_reg(adap,
+ mem_base +
+ offset));
+ else
+ t4_write_reg(adap, mem_base + offset,
+ (u32)cpu_to_le32(*buf++));
+ offset += sizeof(__be32);
+ len -= sizeof(__be32);
+
+ /* If we've reached the end of our current window aperture,
+ * move the PCI-E Memory Window on to the next. Note that
+ * doing this here after "len" may be 0 allows us to set up
+ * the PCI-E Memory Window for a possible final residual
+ * transfer below ...
+ */
+ if (offset == mem_aperture) {
+ pos += mem_aperture;
+ offset = 0;
+ t4_write_reg(adap,
+ PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET,
+ win), pos | win_pf);
+ t4_read_reg(adap,
+ PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET,
+ win));
+ }
+ }
+
+ /* If the original transfer had a length which wasn't a multiple of
+ * 32-bits, now's where we need to finish off the transfer of the
+ * residual amount. The PCI-E Memory Window has already been moved
+ * above (if necessary) to cover this final transfer.
+ */
+ if (resid) {
+ union {
+ u32 word;
+ char byte[4];
+ } last;
+ unsigned char *bp;
+ int i;
+
+ if (dir == T4_MEMORY_READ) {
+ last.word = le32_to_cpu((__le32)t4_read_reg(adap,
+ mem_base +
+ offset));
+ for (bp = (unsigned char *)buf, i = resid; i < 4; i++)
+ bp[i] = last.byte[i];
+ } else {
+ last.word = *buf;
+ for (i = resid; i < 4; i++)
+ last.byte[i] = 0;
+ t4_write_reg(adap, mem_base + offset,
+ (u32)cpu_to_le32(last.word));
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * t4_memory_rw_mtype -read/write EDC 0, EDC 1 or MC via PCIE memory window
+ * @adap: the adapter
+ * @win: PCI-E Memory Window to use
+ * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
+ * @maddr: address within indicated memory type
+ * @len: amount of memory to transfer
+ * @hbuf: host memory buffer
+ * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
+ *
+ * Reads/writes adapter memory using t4_memory_rw_addr(). This routine
+ * provides an (memory type, address within memory type) interface.
+ */
+int t4_memory_rw_mtype(struct adapter *adap, int win, int mtype, u32 maddr,
+ u32 len, void *hbuf, int dir)
+{
+ u32 mtype_offset;
+ u32 edc_size, mc_size;
+
+ /* Offset into the region of memory which is being accessed
+ * MEM_EDC0 = 0
+ * MEM_EDC1 = 1
+ * MEM_MC = 2 -- MEM_MC for chips with only 1 memory controller
+ * MEM_MC1 = 3 -- for chips with 2 memory controllers (e.g. T5)
+ */
+ edc_size = G_EDRAM0_SIZE(t4_read_reg(adap, A_MA_EDRAM0_BAR));
+ if (mtype != MEM_MC1) {
+ mtype_offset = (mtype * (edc_size * 1024 * 1024));
+ } else {
+ mc_size = G_EXT_MEM0_SIZE(t4_read_reg(adap,
+ A_MA_EXT_MEMORY0_BAR));
+ mtype_offset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;
+ }
+
+ return t4_memory_rw_addr(adap, win,
+ mtype_offset + maddr, len,
+ hbuf, dir);
+}
git.droids-corp.org / dpdk.git / blobdiff