#include <rte_eal.h>
#include <rte_alarm.h>
#include <rte_ether.h>
-#include <rte_ethdev_driver.h>
-#include <rte_ethdev_pci.h>
+#include <ethdev_driver.h>
+#include <ethdev_pci.h>
#include <rte_random.h>
#include <rte_dev.h>
#include <rte_kvargs.h>
--bufp;
sprintf(bufp, "BASE-%s",
t4_get_port_type_description(
- (enum fw_port_type)pi->port_type));
+ (enum fw_port_type)pi->link_cfg.port_type));
dev_info(adap,
" " PCI_PRI_FMT " Chelsio rev %d %s %s\n",
else
adap->params.max_tx_coalesce_num = ETH_COALESCE_PKT_NUM;
+ params[0] = CXGBE_FW_PARAM_DEV(VI_ENABLE_INGRESS_AFTER_LINKUP);
+ ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, params, val);
+ adap->params.vi_enable_rx = (ret == 0 && val[0] != 0);
+
/*
* The MTU/MSS Table is initialized by now, so load their values. If
* we're initializing the adapter, then we'll make any modifications
const struct port_info *pi = adap2pinfo(adap, port_id);
- if (pi->mod_type == FW_PORT_MOD_TYPE_NONE)
+ if (pi->link_cfg.mod_type == FW_PORT_MOD_TYPE_NONE)
dev_info(adap, "Port%d: port module unplugged\n", pi->port_id);
- else if (pi->mod_type < ARRAY_SIZE(mod_str))
+ else if (pi->link_cfg.mod_type < ARRAY_SIZE(mod_str))
dev_info(adap, "Port%d: %s port module inserted\n", pi->port_id,
- mod_str[pi->mod_type]);
- else if (pi->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED)
+ mod_str[pi->link_cfg.mod_type]);
+ else if (pi->link_cfg.mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED)
dev_info(adap, "Port%d: unsupported port module inserted\n",
pi->port_id);
- else if (pi->mod_type == FW_PORT_MOD_TYPE_UNKNOWN)
+ else if (pi->link_cfg.mod_type == FW_PORT_MOD_TYPE_UNKNOWN)
dev_info(adap, "Port%d: unknown port module inserted\n",
pi->port_id);
- else if (pi->mod_type == FW_PORT_MOD_TYPE_ERROR)
+ else if (pi->link_cfg.mod_type == FW_PORT_MOD_TYPE_ERROR)
dev_info(adap, "Port%d: transceiver module error\n",
pi->port_id);
else
dev_info(adap, "Port%d: unknown module type %d inserted\n",
- pi->port_id, pi->mod_type);
+ pi->port_id, pi->link_cfg.mod_type);
+}
+
+void t4_os_link_changed(struct adapter *adap, int port_id)
+{
+ struct port_info *pi = adap2pinfo(adap, port_id);
+
+ /* If link status has not changed or if firmware doesn't
+ * support enabling/disabling VI's Rx path during runtime,
+ * then return.
+ */
+ if (adap->params.vi_enable_rx == 0 ||
+ pi->vi_en_rx == pi->link_cfg.link_ok)
+ return;
+
+ /* Don't enable VI Rx path, if link has been administratively
+ * turned off.
+ */
+ if (pi->vi_en_tx == 0 && pi->vi_en_rx == 0)
+ return;
+
+ /* When link goes down, disable the port's Rx path to drop
+ * Rx traffic closer to the wire, instead of processing it
+ * further in the Rx pipeline. The Rx path will be re-enabled
+ * once the link up message comes in firmware event queue.
+ */
+ pi->vi_en_rx = pi->link_cfg.link_ok;
+ t4_enable_vi(adap, adap->mbox, pi->viid, pi->vi_en_rx, pi->vi_en_tx);
}
bool cxgbe_force_linkup(struct adapter *adap)
}
}
if (ret == 0 && is_pf4(adapter))
- ret = t4_link_l1cfg(adapter, adapter->mbox, pi->tx_chan,
- &pi->link_cfg);
+ ret = t4_link_l1cfg(pi, pi->link_cfg.admin_caps);
if (ret == 0) {
- /*
- * Enabling a Virtual Interface can result in an interrupt
- * during the processing of the VI Enable command and, in some
- * paths, result in an attempt to issue another command in the
- * interrupt context. Thus, we disable interrupts during the
- * course of the VI Enable command ...
+ /* Disable VI Rx until link up message is received in
+ * firmware event queue, if firmware supports enabling/
+ * disabling VI Rx at runtime.
*/
+ pi->vi_en_rx = adapter->params.vi_enable_rx ? 0 : 1;
+ pi->vi_en_tx = 1;
ret = t4_enable_vi_params(adapter, adapter->mbox, pi->viid,
- true, true, false);
+ pi->vi_en_rx, pi->vi_en_tx, false);
}
if (ret == 0 && cxgbe_force_linkup(adapter))
{
*speed_caps = 0;
- fw_caps_to_speed_caps(pi->port_type, pi->link_cfg.pcaps,
+ fw_caps_to_speed_caps(pi->link_cfg.port_type, pi->link_cfg.pcaps,
speed_caps);
if (!(pi->link_cfg.pcaps & FW_PORT_CAP32_ANEG))
struct adapter *adapter = pi->adapter;
int err = 0;
- err = t4_enable_vi(adapter, adapter->mbox, pi->viid, status, status);
+ /* Wait for link up message from firmware to enable Rx path,
+ * if firmware supports enabling/disabling VI Rx at runtime.
+ */
+ pi->vi_en_rx = adapter->params.vi_enable_rx ? 0 : status;
+ pi->vi_en_tx = status;
+ err = t4_enable_vi(adapter, adapter->mbox, pi->viid, pi->vi_en_rx,
+ pi->vi_en_tx);
if (err) {
dev_err(adapter, "%s: disable_vi failed: %d\n", __func__, err);
return err;