-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2014-2015 Chelsio Communications.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Chelsio Communications nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/if_ether.h>
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2014-2018 Chelsio Communications.
+ * All rights reserved.
+ */
+
#include <sys/queue.h>
#include <stdio.h>
#include <errno.h>
#include <rte_log.h>
#include <rte_debug.h>
#include <rte_pci.h>
-#include <rte_atomic.h>
#include <rte_branch_prediction.h>
#include <rte_memory.h>
#include <rte_memzone.h>
#include <rte_eal.h>
#include <rte_alarm.h>
#include <rte_ether.h>
-#include <rte_ethdev.h>
-#include <rte_atomic.h>
+#include <ethdev_driver.h>
#include <rte_malloc.h>
#include <rte_random.h>
#include <rte_dev.h>
-#include "common.h"
-#include "t4_regs.h"
-#include "t4_msg.h"
-#include "cxgbe.h"
+#include "base/common.h"
+#include "base/t4_regs.h"
+#include "base/t4_msg.h"
+#include "cxgbe.h"
+
+static inline void ship_tx_pkt_coalesce_wr(struct adapter *adap,
+ struct sge_eth_txq *txq);
+
+/*
+ * Max number of Rx buffers we replenish at a time.
+ */
+#define MAX_RX_REFILL 64U
+
+#define NOMEM_TMR_IDX (SGE_NTIMERS - 1)
+
+/*
+ * Max Tx descriptor space we allow for an Ethernet packet to be inlined
+ * into a WR.
+ */
+#define MAX_IMM_TX_PKT_LEN 256
+
+/*
+ * Max size of a WR sent through a control Tx queue.
+ */
+#define MAX_CTRL_WR_LEN SGE_MAX_WR_LEN
+
+/*
+ * Bits 0..3 of rx_sw_desc.dma_addr have special meaning. The hardware uses
+ * these to specify the buffer size as an index into the SGE Free List Buffer
+ * Size register array. We also use bit 4, when the buffer has been unmapped
+ * for DMA, but this is of course never sent to the hardware and is only used
+ * to prevent double unmappings. All of the above requires that the Free List
+ * Buffers which we allocate have the bottom 5 bits free (0) -- i.e. are
+ * 32-byte or or a power of 2 greater in alignment. Since the SGE's minimal
+ * Free List Buffer alignment is 32 bytes, this works out for us ...
+ */
+enum {
+ RX_BUF_FLAGS = 0x1f, /* bottom five bits are special */
+ RX_BUF_SIZE = 0x0f, /* bottom three bits are for buf sizes */
+ RX_UNMAPPED_BUF = 0x10, /* buffer is not mapped */
+};
+
+/**
+ * txq_avail - return the number of available slots in a Tx queue
+ * @q: the Tx queue
+ *
+ * Returns the number of descriptors in a Tx queue available to write new
+ * packets.
+ */
+static inline unsigned int txq_avail(const struct sge_txq *q)
+{
+ return q->size - 1 - q->in_use;
+}
+
+static int map_mbuf(struct rte_mbuf *mbuf, dma_addr_t *addr)
+{
+ struct rte_mbuf *m = mbuf;
+
+ for (; m; m = m->next, addr++) {
+ *addr = m->buf_iova + rte_pktmbuf_headroom(m);
+ if (*addr == 0)
+ goto out_err;
+ }
+ return 0;
+
+out_err:
+ return -ENOMEM;
+}
+
+/**
+ * free_tx_desc - reclaims Tx descriptors and their buffers
+ * @q: the Tx queue to reclaim descriptors from
+ * @n: the number of descriptors to reclaim
+ *
+ * Reclaims Tx descriptors from an SGE Tx queue and frees the associated
+ * Tx buffers. Called with the Tx queue lock held.
+ */
+static void free_tx_desc(struct sge_txq *q, unsigned int n)
+{
+ struct tx_sw_desc *d;
+ unsigned int cidx = 0;
+
+ d = &q->sdesc[cidx];
+ while (n--) {
+ if (d->mbuf) { /* an SGL is present */
+ rte_pktmbuf_free(d->mbuf);
+ d->mbuf = NULL;
+ }
+ if (d->coalesce.idx) {
+ int i;
+
+ for (i = 0; i < d->coalesce.idx; i++) {
+ rte_pktmbuf_free(d->coalesce.mbuf[i]);
+ d->coalesce.mbuf[i] = NULL;
+ }
+ d->coalesce.idx = 0;
+ }
+ ++d;
+ if (++cidx == q->size) {
+ cidx = 0;
+ d = q->sdesc;
+ }
+ RTE_MBUF_PREFETCH_TO_FREE(&q->sdesc->mbuf->pool);
+ }
+}
+
+static void reclaim_tx_desc(struct sge_txq *q, unsigned int n)
+{
+ struct tx_sw_desc *d;
+ unsigned int cidx = q->cidx;
+
+ d = &q->sdesc[cidx];
+ while (n--) {
+ if (d->mbuf) { /* an SGL is present */
+ rte_pktmbuf_free(d->mbuf);
+ d->mbuf = NULL;
+ }
+ ++d;
+ if (++cidx == q->size) {
+ cidx = 0;
+ d = q->sdesc;
+ }
+ }
+ q->cidx = cidx;
+}
+
+/**
+ * fl_cap - return the capacity of a free-buffer list
+ * @fl: the FL
+ *
+ * Returns the capacity of a free-buffer list. The capacity is less than
+ * the size because one descriptor needs to be left unpopulated, otherwise
+ * HW will think the FL is empty.
+ */
+static inline unsigned int fl_cap(const struct sge_fl *fl)
+{
+ return fl->size - 8; /* 1 descriptor = 8 buffers */
+}
+
+/**
+ * fl_starving - return whether a Free List is starving.
+ * @adapter: pointer to the adapter
+ * @fl: the Free List
+ *
+ * Tests specified Free List to see whether the number of buffers
+ * available to the hardware has fallen below our "starvation"
+ * threshold.
+ */
+static inline bool fl_starving(const struct adapter *adapter,
+ const struct sge_fl *fl)
+{
+ const struct sge *s = &adapter->sge;
+
+ return fl->avail - fl->pend_cred <= s->fl_starve_thres;
+}
+
+static inline unsigned int get_buf_size(struct adapter *adapter,
+ const struct rx_sw_desc *d)
+{
+ return adapter->sge.fl_buffer_size[d->dma_addr & RX_BUF_SIZE];
+}
+
+/**
+ * free_rx_bufs - free the Rx buffers on an SGE free list
+ * @q: the SGE free list to free buffers from
+ * @n: how many buffers to free
+ *
+ * Release the next @n buffers on an SGE free-buffer Rx queue. The
+ * buffers must be made inaccessible to HW before calling this function.
+ */
+static void free_rx_bufs(struct sge_fl *q, int n)
+{
+ unsigned int cidx = q->cidx;
+ struct rx_sw_desc *d;
+
+ d = &q->sdesc[cidx];
+ while (n--) {
+ if (d->buf) {
+ rte_pktmbuf_free(d->buf);
+ d->buf = NULL;
+ }
+ ++d;
+ if (++cidx == q->size) {
+ cidx = 0;
+ d = q->sdesc;
+ }
+ q->avail--;
+ }
+ q->cidx = cidx;
+}
+
+/**
+ * unmap_rx_buf - unmap the current Rx buffer on an SGE free list
+ * @q: the SGE free list
+ *
+ * Unmap the current buffer on an SGE free-buffer Rx queue. The
+ * buffer must be made inaccessible to HW before calling this function.
+ *
+ * This is similar to @free_rx_bufs above but does not free the buffer.
+ * Do note that the FL still loses any further access to the buffer.
+ */
+static void unmap_rx_buf(struct sge_fl *q)
+{
+ if (++q->cidx == q->size)
+ q->cidx = 0;
+ q->avail--;
+}
+
+static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q)
+{
+ if (q->pend_cred >= 64) {
+ u32 val = adap->params.arch.sge_fl_db;
+
+ if (is_t4(adap->params.chip))
+ val |= V_PIDX(q->pend_cred / 8);
+ else
+ val |= V_PIDX_T5(q->pend_cred / 8);
+
+ /*
+ * Make sure all memory writes to the Free List queue are
+ * committed before we tell the hardware about them.
+ */
+ wmb();
+
+ /*
+ * If we don't have access to the new User Doorbell (T5+), use
+ * the old doorbell mechanism; otherwise use the new BAR2
+ * mechanism.
+ */
+ if (unlikely(!q->bar2_addr)) {
+ u32 reg = is_pf4(adap) ? MYPF_REG(A_SGE_PF_KDOORBELL) :
+ T4VF_SGE_BASE_ADDR +
+ A_SGE_VF_KDOORBELL;
+
+ t4_write_reg_relaxed(adap, reg,
+ val | V_QID(q->cntxt_id));
+ } else {
+ writel_relaxed(val | V_QID(q->bar2_qid),
+ (void *)((uintptr_t)q->bar2_addr +
+ SGE_UDB_KDOORBELL));
+
+ /*
+ * This Write memory Barrier will force the write to
+ * the User Doorbell area to be flushed.
+ */
+ wmb();
+ }
+ q->pend_cred &= 7;
+ }
+}
+
+static inline void set_rx_sw_desc(struct rx_sw_desc *sd, void *buf,
+ dma_addr_t mapping)
+{
+ sd->buf = buf;
+ sd->dma_addr = mapping; /* includes size low bits */
+}
+
+/**
+ * refill_fl_usembufs - refill an SGE Rx buffer ring with mbufs
+ * @adap: the adapter
+ * @q: the ring to refill
+ * @n: the number of new buffers to allocate
+ *
+ * (Re)populate an SGE free-buffer queue with up to @n new packet buffers,
+ * allocated with the supplied gfp flags. The caller must assure that
+ * @n does not exceed the queue's capacity. If afterwards the queue is
+ * found critically low mark it as starving in the bitmap of starving FLs.
+ *
+ * Returns the number of buffers allocated.
+ */
+static unsigned int refill_fl_usembufs(struct adapter *adap, struct sge_fl *q,
+ int n)
+{
+ struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, fl);
+ struct rx_sw_desc *sd = &q->sdesc[q->pidx];
+ __be64 *d = &q->desc[q->pidx];
+ struct rte_mbuf *buf_bulk[n];
+ unsigned int cred = q->avail;
+ int ret, i;
+
+ ret = rte_mempool_get_bulk(rxq->rspq.mb_pool, (void *)buf_bulk, n);
+ if (unlikely(ret != 0)) {
+ dev_debug(adap, "%s: failed to allocated fl entries in bulk ..\n",
+ __func__);
+ q->alloc_failed++;
+ rxq->rspq.eth_dev->data->rx_mbuf_alloc_failed++;
+ goto out;
+ }
+
+ for (i = 0; i < n; i++) {
+ struct rte_mbuf *mbuf = buf_bulk[i];
+ dma_addr_t mapping;
+
+ if (!mbuf) {
+ dev_debug(adap, "%s: mbuf alloc failed\n", __func__);
+ q->alloc_failed++;
+ rxq->rspq.eth_dev->data->rx_mbuf_alloc_failed++;
+ goto out;
+ }
+
+ rte_mbuf_refcnt_set(mbuf, 1);
+ mbuf->data_off = RTE_PKTMBUF_HEADROOM;
+ mbuf->next = NULL;
+ mbuf->nb_segs = 1;
+ mbuf->port = rxq->rspq.port_id;
+
+ mapping = (dma_addr_t)(mbuf->buf_iova + mbuf->data_off);
+ mapping |= q->fl_buf_size_idx;
+ *d++ = cpu_to_be64(mapping);
+ set_rx_sw_desc(sd, mbuf, mapping);
+ sd++;
+
+ q->avail++;
+ if (++q->pidx == q->size) {
+ q->pidx = 0;
+ sd = q->sdesc;
+ d = q->desc;
+ }
+ }
+
+out: cred = q->avail - cred;
+ q->pend_cred += cred;
+ ring_fl_db(adap, q);
+
+ if (unlikely(fl_starving(adap, q))) {
+ /*
+ * Make sure data has been written to free list
+ */
+ wmb();
+ q->low++;
+ }
+
+ return cred;
+}
+
+/**
+ * refill_fl - refill an SGE Rx buffer ring with mbufs
+ * @adap: the adapter
+ * @q: the ring to refill
+ * @n: the number of new buffers to allocate
+ *
+ * (Re)populate an SGE free-buffer queue with up to @n new packet buffers,
+ * allocated with the supplied gfp flags. The caller must assure that
+ * @n does not exceed the queue's capacity. Returns the number of buffers
+ * allocated.
+ */
+static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n)
+{
+ return refill_fl_usembufs(adap, q, n);
+}
+
+static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
+{
+ refill_fl(adap, fl, min(MAX_RX_REFILL, fl_cap(fl) - fl->avail));
+}
+
+/*
+ * Return the number of reclaimable descriptors in a Tx queue.
+ */
+static inline int reclaimable(const struct sge_txq *q)
+{
+ int hw_cidx = ntohs(q->stat->cidx);
+
+ hw_cidx -= q->cidx;
+ if (hw_cidx < 0)
+ return hw_cidx + q->size;
+ return hw_cidx;
+}
+
+/**
+ * reclaim_completed_tx - reclaims completed Tx descriptors
+ * @q: the Tx queue to reclaim completed descriptors from
+ *
+ * Reclaims Tx descriptors that the SGE has indicated it has processed.
+ */
+void reclaim_completed_tx(struct sge_txq *q)
+{
+ unsigned int avail = reclaimable(q);
+
+ do {
+ /* reclaim as much as possible */
+ reclaim_tx_desc(q, avail);
+ q->in_use -= avail;
+ avail = reclaimable(q);
+ } while (avail);
+}
+
+/**
+ * sgl_len - calculates the size of an SGL of the given capacity
+ * @n: the number of SGL entries
+ *
+ * Calculates the number of flits needed for a scatter/gather list that
+ * can hold the given number of entries.
+ */
+static inline unsigned int sgl_len(unsigned int n)
+{
+ /*
+ * A Direct Scatter Gather List uses 32-bit lengths and 64-bit PCI DMA
+ * addresses. The DSGL Work Request starts off with a 32-bit DSGL
+ * ULPTX header, then Length0, then Address0, then, for 1 <= i <= N,
+ * repeated sequences of { Length[i], Length[i+1], Address[i],
+ * Address[i+1] } (this ensures that all addresses are on 64-bit
+ * boundaries). If N is even, then Length[N+1] should be set to 0 and
+ * Address[N+1] is omitted.
+ *
+ * The following calculation incorporates all of the above. It's
+ * somewhat hard to follow but, briefly: the "+2" accounts for the
+ * first two flits which include the DSGL header, Length0 and
+ * Address0; the "(3*(n-1))/2" covers the main body of list entries (3
+ * flits for every pair of the remaining N) +1 if (n-1) is odd; and
+ * finally the "+((n-1)&1)" adds the one remaining flit needed if
+ * (n-1) is odd ...
+ */
+ n--;
+ return (3 * n) / 2 + (n & 1) + 2;
+}
+
+/**
+ * flits_to_desc - returns the num of Tx descriptors for the given flits
+ * @n: the number of flits
+ *
+ * Returns the number of Tx descriptors needed for the supplied number
+ * of flits.
+ */
+static inline unsigned int flits_to_desc(unsigned int n)
+{
+ return DIV_ROUND_UP(n, 8);
+}
+
+/**
+ * is_eth_imm - can an Ethernet packet be sent as immediate data?
+ * @m: the packet
+ *
+ * Returns whether an Ethernet packet is small enough to fit as
+ * immediate data. Return value corresponds to the headroom required.
+ */
+static inline int is_eth_imm(const struct rte_mbuf *m)
+{
+ unsigned int hdrlen = (m->ol_flags & RTE_MBUF_F_TX_TCP_SEG) ?
+ sizeof(struct cpl_tx_pkt_lso_core) : 0;
+
+ hdrlen += sizeof(struct cpl_tx_pkt);
+ if (m->pkt_len <= MAX_IMM_TX_PKT_LEN - hdrlen)
+ return hdrlen;
+
+ return 0;
+}
+
+/**
+ * calc_tx_flits - calculate the number of flits for a packet Tx WR
+ * @m: the packet
+ * @adap: adapter structure pointer
+ *
+ * Returns the number of flits needed for a Tx WR for the given Ethernet
+ * packet, including the needed WR and CPL headers.
+ */
+static inline unsigned int calc_tx_flits(const struct rte_mbuf *m,
+ struct adapter *adap)
+{
+ size_t wr_size = is_pf4(adap) ? sizeof(struct fw_eth_tx_pkt_wr) :
+ sizeof(struct fw_eth_tx_pkt_vm_wr);
+ unsigned int flits;
+ int hdrlen;
+
+ /*
+ * If the mbuf is small enough, we can pump it out as a work request
+ * with only immediate data. In that case we just have to have the
+ * TX Packet header plus the mbuf data in the Work Request.
+ */
+
+ hdrlen = is_eth_imm(m);
+ if (hdrlen)
+ return DIV_ROUND_UP(m->pkt_len + hdrlen, sizeof(__be64));
+
+ /*
+ * Otherwise, we're going to have to construct a Scatter gather list
+ * of the mbuf body and fragments. We also include the flits necessary
+ * for the TX Packet Work Request and CPL. We always have a firmware
+ * Write Header (incorporated as part of the cpl_tx_pkt_lso and
+ * cpl_tx_pkt structures), followed by either a TX Packet Write CPL
+ * message or, if we're doing a Large Send Offload, an LSO CPL message
+ * with an embedded TX Packet Write CPL message.
+ */
+ flits = sgl_len(m->nb_segs);
+ if (m->tso_segsz)
+ flits += (wr_size + sizeof(struct cpl_tx_pkt_lso_core) +
+ sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64);
+ else
+ flits += (wr_size +
+ sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64);
+ return flits;
+}
+
+/**
+ * write_sgl - populate a scatter/gather list for a packet
+ * @mbuf: the packet
+ * @q: the Tx queue we are writing into
+ * @sgl: starting location for writing the SGL
+ * @end: points right after the end of the SGL
+ * @start: start offset into mbuf main-body data to include in the SGL
+ * @addr: address of mapped region
+ *
+ * Generates a scatter/gather list for the buffers that make up a packet.
+ * The caller must provide adequate space for the SGL that will be written.
+ * The SGL includes all of the packet's page fragments and the data in its
+ * main body except for the first @start bytes. @sgl must be 16-byte
+ * aligned and within a Tx descriptor with available space. @end points
+ * write after the end of the SGL but does not account for any potential
+ * wrap around, i.e., @end > @sgl.
+ */
+static void write_sgl(struct rte_mbuf *mbuf, struct sge_txq *q,
+ struct ulptx_sgl *sgl, u64 *end, unsigned int start,
+ const dma_addr_t *addr)
+{
+ unsigned int i, len;
+ struct ulptx_sge_pair *to;
+ struct rte_mbuf *m = mbuf;
+ unsigned int nfrags = m->nb_segs;
+ struct ulptx_sge_pair buf[nfrags / 2];
+
+ len = m->data_len - start;
+ sgl->len0 = htonl(len);
+ sgl->addr0 = rte_cpu_to_be_64(addr[0]);
+
+ sgl->cmd_nsge = htonl(V_ULPTX_CMD(ULP_TX_SC_DSGL) |
+ V_ULPTX_NSGE(nfrags));
+ if (likely(--nfrags == 0))
+ return;
+ /*
+ * Most of the complexity below deals with the possibility we hit the
+ * end of the queue in the middle of writing the SGL. For this case
+ * only we create the SGL in a temporary buffer and then copy it.
+ */
+ to = (u8 *)end > (u8 *)q->stat ? buf : sgl->sge;
+
+ for (i = 0; nfrags >= 2; nfrags -= 2, to++) {
+ m = m->next;
+ to->len[0] = rte_cpu_to_be_32(m->data_len);
+ to->addr[0] = rte_cpu_to_be_64(addr[++i]);
+ m = m->next;
+ to->len[1] = rte_cpu_to_be_32(m->data_len);
+ to->addr[1] = rte_cpu_to_be_64(addr[++i]);
+ }
+ if (nfrags) {
+ m = m->next;
+ to->len[0] = rte_cpu_to_be_32(m->data_len);
+ to->len[1] = rte_cpu_to_be_32(0);
+ to->addr[0] = rte_cpu_to_be_64(addr[i + 1]);
+ }
+ if (unlikely((u8 *)end > (u8 *)q->stat)) {
+ unsigned int part0 = RTE_PTR_DIFF((u8 *)q->stat,
+ (u8 *)sgl->sge);
+ unsigned int part1;
+
+ if (likely(part0))
+ memcpy(sgl->sge, buf, part0);
+ part1 = RTE_PTR_DIFF((u8 *)end, (u8 *)q->stat);
+ rte_memcpy(q->desc, RTE_PTR_ADD((u8 *)buf, part0), part1);
+ end = RTE_PTR_ADD((void *)q->desc, part1);
+ }
+ if ((uintptr_t)end & 8) /* 0-pad to multiple of 16 */
+ *(u64 *)end = 0;
+}
+
+#define IDXDIFF(head, tail, wrap) \
+ ((head) >= (tail) ? (head) - (tail) : (wrap) - (tail) + (head))
+
+#define Q_IDXDIFF(q, idx) IDXDIFF((q)->pidx, (q)->idx, (q)->size)
+#define R_IDXDIFF(q, idx) IDXDIFF((q)->cidx, (q)->idx, (q)->size)
+
+#define PIDXDIFF(head, tail, wrap) \
+ ((tail) >= (head) ? (tail) - (head) : (wrap) - (head) + (tail))
+#define P_IDXDIFF(q, idx) PIDXDIFF((q)->cidx, idx, (q)->size)
+
+/**
+ * ring_tx_db - ring a Tx queue's doorbell
+ * @adap: the adapter
+ * @q: the Tx queue
+ * @n: number of new descriptors to give to HW
+ *
+ * Ring the doorbell for a Tx queue.
+ */
+static inline void ring_tx_db(struct adapter *adap, struct sge_txq *q)
+{
+ int n = Q_IDXDIFF(q, dbidx);
+
+ /*
+ * Make sure that all writes to the TX Descriptors are committed
+ * before we tell the hardware about them.
+ */
+ rte_wmb();
+
+ /*
+ * If we don't have access to the new User Doorbell (T5+), use the old
+ * doorbell mechanism; otherwise use the new BAR2 mechanism.
+ */
+ if (unlikely(!q->bar2_addr)) {
+ u32 val = V_PIDX(n);
+
+ /*
+ * For T4 we need to participate in the Doorbell Recovery
+ * mechanism.
+ */
+ if (!q->db_disabled)
+ t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL),
+ V_QID(q->cntxt_id) | val);
+ else
+ q->db_pidx_inc += n;
+ q->db_pidx = q->pidx;
+ } else {
+ u32 val = V_PIDX_T5(n);
+
+ /*
+ * T4 and later chips share the same PIDX field offset within
+ * the doorbell, but T5 and later shrank the field in order to
+ * gain a bit for Doorbell Priority. The field was absurdly
+ * large in the first place (14 bits) so we just use the T5
+ * and later limits and warn if a Queue ID is too large.
+ */
+ WARN_ON(val & F_DBPRIO);
+
+ writel(val | V_QID(q->bar2_qid),
+ (void *)((uintptr_t)q->bar2_addr + SGE_UDB_KDOORBELL));
+
+ /*
+ * This Write Memory Barrier will force the write to the User
+ * Doorbell area to be flushed. This is needed to prevent
+ * writes on different CPUs for the same queue from hitting
+ * the adapter out of order. This is required when some Work
+ * Requests take the Write Combine Gather Buffer path (user
+ * doorbell area offset [SGE_UDB_WCDOORBELL..+63]) and some
+ * take the traditional path where we simply increment the
+ * PIDX (User Doorbell area SGE_UDB_KDOORBELL) and have the
+ * hardware DMA read the actual Work Request.
+ */
+ rte_wmb();
+ }
+ q->dbidx = q->pidx;
+}
+
+/*
+ * Figure out what HW csum a packet wants and return the appropriate control
+ * bits.
+ */
+static u64 hwcsum(enum chip_type chip, const struct rte_mbuf *m)
+{
+ int csum_type;
+
+ if (m->ol_flags & RTE_MBUF_F_TX_IP_CKSUM) {
+ switch (m->ol_flags & RTE_MBUF_F_TX_L4_MASK) {
+ case RTE_MBUF_F_TX_TCP_CKSUM:
+ csum_type = TX_CSUM_TCPIP;
+ break;
+ case RTE_MBUF_F_TX_UDP_CKSUM:
+ csum_type = TX_CSUM_UDPIP;
+ break;
+ default:
+ goto nocsum;
+ }
+ } else {
+ goto nocsum;
+ }
+
+ if (likely(csum_type >= TX_CSUM_TCPIP)) {
+ u64 hdr_len = V_TXPKT_IPHDR_LEN(m->l3_len);
+ int eth_hdr_len = m->l2_len;
+
+ if (CHELSIO_CHIP_VERSION(chip) <= CHELSIO_T5)
+ hdr_len |= V_TXPKT_ETHHDR_LEN(eth_hdr_len);
+ else
+ hdr_len |= V_T6_TXPKT_ETHHDR_LEN(eth_hdr_len);
+ return V_TXPKT_CSUM_TYPE(csum_type) | hdr_len;
+ }
+nocsum:
+ /*
+ * unknown protocol, disable HW csum
+ * and hope a bad packet is detected
+ */
+ return F_TXPKT_L4CSUM_DIS;
+}
+
+static inline void txq_advance(struct sge_txq *q, unsigned int n)
+{
+ q->in_use += n;
+ q->pidx += n;
+ if (q->pidx >= q->size)
+ q->pidx -= q->size;
+}
+
+#define MAX_COALESCE_LEN 64000
+
+static inline bool wraps_around(struct sge_txq *q, int ndesc)
+{
+ return (q->pidx + ndesc) > q->size ? true : false;
+}
+
+static void tx_timer_cb(void *data)
+{
+ struct adapter *adap = (struct adapter *)data;
+ struct sge_eth_txq *txq = &adap->sge.ethtxq[0];
+ int i;
+ unsigned int coal_idx;
+
+ /* monitor any pending tx */
+ for (i = 0; i < adap->sge.max_ethqsets; i++, txq++) {
+ if (t4_os_trylock(&txq->txq_lock)) {
+ coal_idx = txq->q.coalesce.idx;
+ if (coal_idx) {
+ if (coal_idx == txq->q.last_coal_idx &&
+ txq->q.pidx == txq->q.last_pidx) {
+ ship_tx_pkt_coalesce_wr(adap, txq);
+ } else {
+ txq->q.last_coal_idx = coal_idx;
+ txq->q.last_pidx = txq->q.pidx;
+ }
+ }
+ t4_os_unlock(&txq->txq_lock);
+ }
+ }
+ rte_eal_alarm_set(50, tx_timer_cb, (void *)adap);
+}
+
+/**
+ * ship_tx_pkt_coalesce_wr - finalizes and ships a coalesce WR
+ * @ adap: adapter structure
+ * @txq: tx queue
+ *
+ * writes the different fields of the pkts WR and sends it.
+ */
+static inline void ship_tx_pkt_coalesce_wr(struct adapter *adap,
+ struct sge_eth_txq *txq)
+{
+ struct fw_eth_tx_pkts_vm_wr *vmwr;
+ const size_t fw_hdr_copy_len = (sizeof(vmwr->ethmacdst) +
+ sizeof(vmwr->ethmacsrc) +
+ sizeof(vmwr->ethtype) +
+ sizeof(vmwr->vlantci));
+ struct fw_eth_tx_pkts_wr *wr;
+ struct sge_txq *q = &txq->q;
+ unsigned int ndesc;
+ u32 wr_mid;
+
+ /* fill the pkts WR header */
+ wr = (void *)&q->desc[q->pidx];
+ vmwr = (void *)&q->desc[q->pidx];
+
+ wr_mid = V_FW_WR_LEN16(DIV_ROUND_UP(q->coalesce.flits, 2));
+ ndesc = flits_to_desc(q->coalesce.flits);
+ wr->equiq_to_len16 = htonl(wr_mid);
+ wr->plen = cpu_to_be16(q->coalesce.len);
+ wr->npkt = q->coalesce.idx;
+ wr->r3 = 0;
+ if (is_pf4(adap)) {
+ wr->type = q->coalesce.type;
+ if (likely(wr->type != 0))
+ wr->op_pkd = htonl(V_FW_WR_OP(FW_ETH_TX_PKTS2_WR));
+ else
+ wr->op_pkd = htonl(V_FW_WR_OP(FW_ETH_TX_PKTS_WR));
+ } else {
+ wr->op_pkd = htonl(V_FW_WR_OP(FW_ETH_TX_PKTS_VM_WR));
+ vmwr->r4 = 0;
+ memcpy((void *)vmwr->ethmacdst, (void *)q->coalesce.ethmacdst,
+ fw_hdr_copy_len);
+ }
+
+ /* zero out coalesce structure members */
+ memset((void *)&q->coalesce, 0, sizeof(struct eth_coalesce));
+
+ txq_advance(q, ndesc);
+ txq->stats.coal_wr++;
+ txq->stats.coal_pkts += wr->npkt;
+
+ if (Q_IDXDIFF(q, equeidx) >= q->size / 2) {
+ q->equeidx = q->pidx;
+ wr_mid |= F_FW_WR_EQUEQ;
+ wr->equiq_to_len16 = htonl(wr_mid);
+ }
+ ring_tx_db(adap, q);
+}
+
+/**
+ * should_tx_packet_coalesce - decides whether to coalesce an mbuf or not
+ * @txq: tx queue where the mbuf is sent
+ * @mbuf: mbuf to be sent
+ * @nflits: return value for number of flits needed
+ * @adap: adapter structure
+ *
+ * This function decides if a packet should be coalesced or not.
+ */
+static inline int should_tx_packet_coalesce(struct sge_eth_txq *txq,
+ struct rte_mbuf *mbuf,
+ unsigned int *nflits,
+ struct adapter *adap)
+{
+ struct fw_eth_tx_pkts_vm_wr *wr;
+ const size_t fw_hdr_copy_len = (sizeof(wr->ethmacdst) +
+ sizeof(wr->ethmacsrc) +
+ sizeof(wr->ethtype) +
+ sizeof(wr->vlantci));
+ struct sge_txq *q = &txq->q;
+ unsigned int flits, ndesc;
+ unsigned char type = 0;
+ int credits, wr_size;
+
+ /* use coal WR type 1 when no frags are present */
+ type = (mbuf->nb_segs == 1) ? 1 : 0;
+ if (!is_pf4(adap)) {
+ if (!type)
+ return 0;
+
+ if (q->coalesce.idx && memcmp((void *)q->coalesce.ethmacdst,
+ rte_pktmbuf_mtod(mbuf, void *),
+ fw_hdr_copy_len))
+ ship_tx_pkt_coalesce_wr(adap, txq);
+ }
+
+ if (unlikely(type != q->coalesce.type && q->coalesce.idx))
+ ship_tx_pkt_coalesce_wr(adap, txq);
+
+ /* calculate the number of flits required for coalescing this packet
+ * without the 2 flits of the WR header. These are added further down
+ * if we are just starting in new PKTS WR. sgl_len doesn't account for
+ * the possible 16 bytes alignment ULP TX commands so we do it here.
+ */
+ flits = (sgl_len(mbuf->nb_segs) + 1) & ~1U;
+ if (type == 0)
+ flits += (sizeof(struct ulp_txpkt) +
+ sizeof(struct ulptx_idata)) / sizeof(__be64);
+ flits += sizeof(struct cpl_tx_pkt_core) / sizeof(__be64);
+ *nflits = flits;
+
+ /* If coalescing is on, the mbuf is added to a pkts WR */
+ if (q->coalesce.idx) {
+ ndesc = DIV_ROUND_UP(q->coalesce.flits + flits, 8);
+ credits = txq_avail(q) - ndesc;
+
+ if (unlikely(wraps_around(q, ndesc)))
+ return 0;
+
+ /* If we are wrapping or this is last mbuf then, send the
+ * already coalesced mbufs and let the non-coalesce pass
+ * handle the mbuf.
+ */
+ if (unlikely(credits < 0)) {
+ ship_tx_pkt_coalesce_wr(adap, txq);
+ return -EBUSY;
+ }
+
+ /* If the max coalesce len or the max WR len is reached
+ * ship the WR and keep coalescing on.
+ */
+ if (unlikely((q->coalesce.len + mbuf->pkt_len >
+ MAX_COALESCE_LEN) ||
+ (q->coalesce.flits + flits >
+ q->coalesce.max))) {
+ ship_tx_pkt_coalesce_wr(adap, txq);
+ goto new;
+ }
+ return 1;
+ }
+
+new:
+ /* start a new pkts WR, the WR header is not filled below */
+ wr_size = is_pf4(adap) ? sizeof(struct fw_eth_tx_pkts_wr) :
+ sizeof(struct fw_eth_tx_pkts_vm_wr);
+ flits += wr_size / sizeof(__be64);
+ ndesc = flits_to_desc(q->coalesce.flits + flits);
+ credits = txq_avail(q) - ndesc;
+
+ if (unlikely(wraps_around(q, ndesc)))
+ return 0;
+
+ if (unlikely(credits < 0))
+ return -EBUSY;
+
+ q->coalesce.flits += wr_size / sizeof(__be64);
+ q->coalesce.type = type;
+ q->coalesce.ptr = (unsigned char *)&q->desc[q->pidx] +
+ q->coalesce.flits * sizeof(__be64);
+ if (!is_pf4(adap))
+ memcpy((void *)q->coalesce.ethmacdst,
+ rte_pktmbuf_mtod(mbuf, void *), fw_hdr_copy_len);
+ return 1;
+}
+
+/**
+ * tx_do_packet_coalesce - add an mbuf to a coalesce WR
+ * @txq: sge_eth_txq used send the mbuf
+ * @mbuf: mbuf to be sent
+ * @flits: flits needed for this mbuf
+ * @adap: adapter structure
+ * @pi: port_info structure
+ * @addr: mapped address of the mbuf
+ *
+ * Adds an mbuf to be sent as part of a coalesce WR by filling a
+ * ulp_tx_pkt command, ulp_tx_sc_imm command, cpl message and
+ * ulp_tx_sc_dsgl command.
+ */
+static inline int tx_do_packet_coalesce(struct sge_eth_txq *txq,
+ struct rte_mbuf *mbuf,
+ int flits, struct adapter *adap,
+ const struct port_info *pi,
+ dma_addr_t *addr, uint16_t nb_pkts)
+{
+ u64 cntrl, *end;
+ struct sge_txq *q = &txq->q;
+ struct ulp_txpkt *mc;
+ struct ulptx_idata *sc_imm;
+ struct cpl_tx_pkt_core *cpl;
+ struct tx_sw_desc *sd;
+ unsigned int idx = q->coalesce.idx, len = mbuf->pkt_len;
+
+ if (q->coalesce.type == 0) {
+ mc = (struct ulp_txpkt *)q->coalesce.ptr;
+ mc->cmd_dest = htonl(V_ULPTX_CMD(4) | V_ULP_TXPKT_DEST(0) |
+ V_ULP_TXPKT_FID(adap->sge.fw_evtq.cntxt_id) |
+ F_ULP_TXPKT_RO);
+ mc->len = htonl(DIV_ROUND_UP(flits, 2));
+ sc_imm = (struct ulptx_idata *)(mc + 1);
+ sc_imm->cmd_more = htonl(V_ULPTX_CMD(ULP_TX_SC_IMM) |
+ F_ULP_TX_SC_MORE);
+ sc_imm->len = htonl(sizeof(*cpl));
+ end = (u64 *)mc + flits;
+ cpl = (struct cpl_tx_pkt_core *)(sc_imm + 1);
+ } else {
+ end = (u64 *)q->coalesce.ptr + flits;
+ cpl = (struct cpl_tx_pkt_core *)q->coalesce.ptr;
+ }
+
+ /* update coalesce structure for this txq */
+ q->coalesce.flits += flits;
+ q->coalesce.ptr += flits * sizeof(__be64);
+ q->coalesce.len += mbuf->pkt_len;
+
+ /* fill the cpl message, same as in t4_eth_xmit, this should be kept
+ * similar to t4_eth_xmit
+ */
+ if (mbuf->ol_flags & RTE_MBUF_F_TX_IP_CKSUM) {
+ cntrl = hwcsum(adap->params.chip, mbuf) |
+ F_TXPKT_IPCSUM_DIS;
+ txq->stats.tx_cso++;
+ } else {
+ cntrl = F_TXPKT_L4CSUM_DIS | F_TXPKT_IPCSUM_DIS;
+ }
+
+ if (mbuf->ol_flags & RTE_MBUF_F_TX_VLAN) {
+ txq->stats.vlan_ins++;
+ cntrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(mbuf->vlan_tci);
+ }
+
+ cpl->ctrl0 = htonl(V_TXPKT_OPCODE(CPL_TX_PKT_XT));
+ if (is_pf4(adap))
+ cpl->ctrl0 |= htonl(V_TXPKT_INTF(pi->tx_chan) |
+ V_TXPKT_PF(adap->pf));
+ else
+ cpl->ctrl0 |= htonl(V_TXPKT_INTF(pi->port_id));
+ cpl->pack = htons(0);
+ cpl->len = htons(len);
+ cpl->ctrl1 = cpu_to_be64(cntrl);
+ write_sgl(mbuf, q, (struct ulptx_sgl *)(cpl + 1), end, 0, addr);
+ txq->stats.pkts++;
+ txq->stats.tx_bytes += len;
+
+ sd = &q->sdesc[q->pidx + (idx >> 1)];
+ if (!(idx & 1)) {
+ if (sd->coalesce.idx) {
+ int i;
+
+ for (i = 0; i < sd->coalesce.idx; i++) {
+ rte_pktmbuf_free(sd->coalesce.mbuf[i]);
+ sd->coalesce.mbuf[i] = NULL;
+ }
+ }
+ }
+
+ /* store pointers to the mbuf and the sgl used in free_tx_desc.
+ * each tx desc can hold two pointers corresponding to the value
+ * of ETH_COALESCE_PKT_PER_DESC
+ */
+ sd->coalesce.mbuf[idx & 1] = mbuf;
+ sd->coalesce.sgl[idx & 1] = (struct ulptx_sgl *)(cpl + 1);
+ sd->coalesce.idx = (idx & 1) + 1;
+
+ /* Send the coalesced work request, only if max reached. However,
+ * if lower latency is preferred over throughput, then don't wait
+ * for coalescing the next Tx burst and send the packets now.
+ */
+ q->coalesce.idx++;
+ if (q->coalesce.idx == adap->params.max_tx_coalesce_num ||
+ (adap->devargs.tx_mode_latency && q->coalesce.idx >= nb_pkts))
+ ship_tx_pkt_coalesce_wr(adap, txq);
+
+ return 0;
+}
+
+/**
+ * t4_eth_xmit - add a packet to an Ethernet Tx queue
+ * @txq: the egress queue
+ * @mbuf: the packet
+ *
+ * Add a packet to an SGE Ethernet Tx queue. Runs with softirqs disabled.
+ */
+int t4_eth_xmit(struct sge_eth_txq *txq, struct rte_mbuf *mbuf,
+ uint16_t nb_pkts)
+{
+ const struct port_info *pi;
+ struct cpl_tx_pkt_lso_core *lso;
+ struct adapter *adap;
+ struct rte_mbuf *m = mbuf;
+ struct fw_eth_tx_pkt_wr *wr;
+ struct fw_eth_tx_pkt_vm_wr *vmwr;
+ struct cpl_tx_pkt_core *cpl;
+ struct tx_sw_desc *d;
+ dma_addr_t addr[m->nb_segs];
+ unsigned int flits, ndesc, cflits;
+ int l3hdr_len, l4hdr_len, eth_xtra_len;
+ int len, last_desc;
+ int should_coal, credits;
+ u32 wr_mid;
+ u64 cntrl, *end;
+ bool v6;
+ u32 max_pkt_len;
+
+ /* Reject xmit if queue is stopped */
+ if (unlikely(txq->flags & EQ_STOPPED))
+ return -(EBUSY);
+
+ /*
+ * The chip min packet length is 10 octets but play safe and reject
+ * anything shorter than an Ethernet header.
+ */
+ if (unlikely(m->pkt_len < RTE_ETHER_HDR_LEN)) {
+out_free:
+ rte_pktmbuf_free(m);
+ return 0;
+ }
+
+ max_pkt_len = txq->data->mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+ if ((!(m->ol_flags & RTE_MBUF_F_TX_TCP_SEG)) &&
+ (unlikely(m->pkt_len > max_pkt_len)))
+ goto out_free;
+
+ pi = txq->data->dev_private;
+ adap = pi->adapter;
+
+ cntrl = F_TXPKT_L4CSUM_DIS | F_TXPKT_IPCSUM_DIS;
+ /* align the end of coalesce WR to a 512 byte boundary */
+ txq->q.coalesce.max = (8 - (txq->q.pidx & 7)) * 8;
+
+ if ((m->ol_flags & RTE_MBUF_F_TX_TCP_SEG) == 0) {
+ should_coal = should_tx_packet_coalesce(txq, mbuf, &cflits, adap);
+ if (should_coal > 0) {
+ if (unlikely(map_mbuf(mbuf, addr) < 0)) {
+ dev_warn(adap, "%s: mapping err for coalesce\n",
+ __func__);
+ txq->stats.mapping_err++;
+ goto out_free;
+ }
+ return tx_do_packet_coalesce(txq, mbuf, cflits, adap,
+ pi, addr, nb_pkts);
+ } else if (should_coal < 0) {
+ return should_coal;
+ }
+ }
+
+ if (txq->q.coalesce.idx)
+ ship_tx_pkt_coalesce_wr(adap, txq);
+
+ flits = calc_tx_flits(m, adap);
+ ndesc = flits_to_desc(flits);
+ credits = txq_avail(&txq->q) - ndesc;
+
+ if (unlikely(credits < 0)) {
+ dev_debug(adap, "%s: Tx ring %u full; credits = %d\n",
+ __func__, txq->q.cntxt_id, credits);
+ return -EBUSY;
+ }
+
+ if (unlikely(map_mbuf(m, addr) < 0)) {
+ txq->stats.mapping_err++;
+ goto out_free;
+ }
+
+ wr_mid = V_FW_WR_LEN16(DIV_ROUND_UP(flits, 2));
+ if (Q_IDXDIFF(&txq->q, equeidx) >= 64) {
+ txq->q.equeidx = txq->q.pidx;
+ wr_mid |= F_FW_WR_EQUEQ;
+ }
+
+ wr = (void *)&txq->q.desc[txq->q.pidx];
+ vmwr = (void *)&txq->q.desc[txq->q.pidx];
+ wr->equiq_to_len16 = htonl(wr_mid);
+ if (is_pf4(adap)) {
+ wr->r3 = rte_cpu_to_be_64(0);
+ end = (u64 *)wr + flits;
+ } else {
+ const size_t fw_hdr_copy_len = (sizeof(vmwr->ethmacdst) +
+ sizeof(vmwr->ethmacsrc) +
+ sizeof(vmwr->ethtype) +
+ sizeof(vmwr->vlantci));
+
+ vmwr->r3[0] = rte_cpu_to_be_32(0);
+ vmwr->r3[1] = rte_cpu_to_be_32(0);
+ memcpy((void *)vmwr->ethmacdst, rte_pktmbuf_mtod(m, void *),
+ fw_hdr_copy_len);
+ end = (u64 *)vmwr + flits;
+ }
+
+ len = sizeof(*cpl);
+
+ /* Coalescing skipped and we send through normal path */
+ if (!(m->ol_flags & RTE_MBUF_F_TX_TCP_SEG)) {
+ wr->op_immdlen = htonl(V_FW_WR_OP(is_pf4(adap) ?
+ FW_ETH_TX_PKT_WR :
+ FW_ETH_TX_PKT_VM_WR) |
+ V_FW_WR_IMMDLEN(len));
+ if (is_pf4(adap))
+ cpl = (void *)(wr + 1);
+ else
+ cpl = (void *)(vmwr + 1);
+ if (m->ol_flags & RTE_MBUF_F_TX_IP_CKSUM) {
+ cntrl = hwcsum(adap->params.chip, m) |
+ F_TXPKT_IPCSUM_DIS;
+ txq->stats.tx_cso++;
+ }
+ } else {
+ if (is_pf4(adap))
+ lso = (void *)(wr + 1);
+ else
+ lso = (void *)(vmwr + 1);
+ v6 = (m->ol_flags & RTE_MBUF_F_TX_IPV6) != 0;
+ l3hdr_len = m->l3_len;
+ l4hdr_len = m->l4_len;
+ eth_xtra_len = m->l2_len - RTE_ETHER_HDR_LEN;
+ len += sizeof(*lso);
+ wr->op_immdlen = htonl(V_FW_WR_OP(is_pf4(adap) ?
+ FW_ETH_TX_PKT_WR :
+ FW_ETH_TX_PKT_VM_WR) |
+ V_FW_WR_IMMDLEN(len));
+ lso->lso_ctrl = htonl(V_LSO_OPCODE(CPL_TX_PKT_LSO) |
+ F_LSO_FIRST_SLICE | F_LSO_LAST_SLICE |
+ V_LSO_IPV6(v6) |
+ V_LSO_ETHHDR_LEN(eth_xtra_len / 4) |
+ V_LSO_IPHDR_LEN(l3hdr_len / 4) |
+ V_LSO_TCPHDR_LEN(l4hdr_len / 4));
+ lso->ipid_ofst = htons(0);
+ lso->mss = htons(m->tso_segsz);
+ lso->seqno_offset = htonl(0);
+ if (is_t4(adap->params.chip))
+ lso->len = htonl(m->pkt_len);
+ else
+ lso->len = htonl(V_LSO_T5_XFER_SIZE(m->pkt_len));
+ cpl = (void *)(lso + 1);
+
+ if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
+ cntrl = V_TXPKT_ETHHDR_LEN(eth_xtra_len);
+ else
+ cntrl = V_T6_TXPKT_ETHHDR_LEN(eth_xtra_len);
+
+ cntrl |= V_TXPKT_CSUM_TYPE(v6 ? TX_CSUM_TCPIP6 :
+ TX_CSUM_TCPIP) |
+ V_TXPKT_IPHDR_LEN(l3hdr_len);
+ txq->stats.tso++;
+ txq->stats.tx_cso += m->tso_segsz;
+ }
+
+ if (m->ol_flags & RTE_MBUF_F_TX_VLAN) {
+ txq->stats.vlan_ins++;
+ cntrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(m->vlan_tci);
+ }
+
+ cpl->ctrl0 = htonl(V_TXPKT_OPCODE(CPL_TX_PKT_XT));
+ if (is_pf4(adap))
+ cpl->ctrl0 |= htonl(V_TXPKT_INTF(pi->tx_chan) |
+ V_TXPKT_PF(adap->pf));
+ else
+ cpl->ctrl0 |= htonl(V_TXPKT_INTF(pi->port_id) |
+ V_TXPKT_PF(0));
+
+ cpl->pack = htons(0);
+ cpl->len = htons(m->pkt_len);
+ cpl->ctrl1 = cpu_to_be64(cntrl);
+
+ txq->stats.pkts++;
+ txq->stats.tx_bytes += m->pkt_len;
+ last_desc = txq->q.pidx + ndesc - 1;
+ if (last_desc >= (int)txq->q.size)
+ last_desc -= txq->q.size;
+
+ d = &txq->q.sdesc[last_desc];
+ if (d->coalesce.idx) {
+ int i;
+
+ for (i = 0; i < d->coalesce.idx; i++) {
+ rte_pktmbuf_free(d->coalesce.mbuf[i]);
+ d->coalesce.mbuf[i] = NULL;
+ }
+ d->coalesce.idx = 0;
+ }
+ write_sgl(m, &txq->q, (struct ulptx_sgl *)(cpl + 1), end, 0,
+ addr);
+ txq->q.sdesc[last_desc].mbuf = m;
+ txq->q.sdesc[last_desc].sgl = (struct ulptx_sgl *)(cpl + 1);
+ txq_advance(&txq->q, ndesc);
+ ring_tx_db(adap, &txq->q);
+ return 0;
+}
+
+/**
+ * reclaim_completed_tx_imm - reclaim completed control-queue Tx descs
+ * @q: the SGE control Tx queue
+ *
+ * This is a variant of reclaim_completed_tx() that is used for Tx queues
+ * that send only immediate data (presently just the control queues) and
+ * thus do not have any mbufs to release.
+ */
+static inline void reclaim_completed_tx_imm(struct sge_txq *q)
+{
+ int hw_cidx = ntohs(q->stat->cidx);
+ int reclaim = hw_cidx - q->cidx;
+
+ if (reclaim < 0)
+ reclaim += q->size;
+
+ q->in_use -= reclaim;
+ q->cidx = hw_cidx;
+}
+
+/**
+ * is_imm - check whether a packet can be sent as immediate data
+ * @mbuf: the packet
+ *
+ * Returns true if a packet can be sent as a WR with immediate data.
+ */
+static inline int is_imm(const struct rte_mbuf *mbuf)
+{
+ return mbuf->pkt_len <= MAX_CTRL_WR_LEN;
+}
+
+/**
+ * inline_tx_mbuf: inline a packet's data into TX descriptors
+ * @q: the TX queue where the packet will be inlined
+ * @from: pointer to data portion of packet
+ * @to: pointer after cpl where data has to be inlined
+ * @len: length of data to inline
+ *
+ * Inline a packet's contents directly to TX descriptors, starting at
+ * the given position within the TX DMA ring.
+ * Most of the complexity of this operation is dealing with wrap arounds
+ * in the middle of the packet we want to inline.
+ */
+static void inline_tx_mbuf(const struct sge_txq *q, caddr_t from, caddr_t *to,
+ int len)
+{
+ int left = RTE_PTR_DIFF(q->stat, *to);
+
+ if (likely((uintptr_t)*to + len <= (uintptr_t)q->stat)) {
+ rte_memcpy(*to, from, len);
+ *to = RTE_PTR_ADD(*to, len);
+ } else {
+ rte_memcpy(*to, from, left);
+ from = RTE_PTR_ADD(from, left);
+ left = len - left;
+ rte_memcpy((void *)q->desc, from, left);
+ *to = RTE_PTR_ADD((void *)q->desc, left);
+ }
+}
+
+/**
+ * ctrl_xmit - send a packet through an SGE control Tx queue
+ * @q: the control queue
+ * @mbuf: the packet
+ *
+ * Send a packet through an SGE control Tx queue. Packets sent through
+ * a control queue must fit entirely as immediate data.
+ */
+static int ctrl_xmit(struct sge_ctrl_txq *q, struct rte_mbuf *mbuf)
+{
+ unsigned int ndesc;
+ struct fw_wr_hdr *wr;
+ caddr_t dst;
+
+ if (unlikely(!is_imm(mbuf))) {
+ WARN_ON(1);
+ rte_pktmbuf_free(mbuf);
+ return -1;
+ }
+
+ reclaim_completed_tx_imm(&q->q);
+ ndesc = DIV_ROUND_UP(mbuf->pkt_len, sizeof(struct tx_desc));
+ t4_os_lock(&q->ctrlq_lock);
+
+ q->full = txq_avail(&q->q) < ndesc ? 1 : 0;
+ if (unlikely(q->full)) {
+ t4_os_unlock(&q->ctrlq_lock);
+ return -1;
+ }
+
+ wr = (struct fw_wr_hdr *)&q->q.desc[q->q.pidx];
+ dst = (void *)wr;
+ inline_tx_mbuf(&q->q, rte_pktmbuf_mtod(mbuf, caddr_t),
+ &dst, mbuf->data_len);
+
+ txq_advance(&q->q, ndesc);
+ if (unlikely(txq_avail(&q->q) < 64))
+ wr->lo |= htonl(F_FW_WR_EQUEQ);
+
+ q->txp++;
+
+ ring_tx_db(q->adapter, &q->q);
+ t4_os_unlock(&q->ctrlq_lock);
+
+ rte_pktmbuf_free(mbuf);
+ return 0;
+}
+
+/**
+ * t4_mgmt_tx - send a management message
+ * @q: the control queue
+ * @mbuf: the packet containing the management message
+ *
+ * Send a management message through control queue.
+ */
+int t4_mgmt_tx(struct sge_ctrl_txq *q, struct rte_mbuf *mbuf)
+{
+ return ctrl_xmit(q, mbuf);
+}
+
+/**
+ * alloc_ring - allocate resources for an SGE descriptor ring
+ * @dev: the port associated with the queue
+ * @z_name: memzone's name
+ * @queue_id: queue index
+ * @socket_id: preferred socket id for memory allocations
+ * @nelem: the number of descriptors
+ * @elem_size: the size of each descriptor
+ * @stat_size: extra space in HW ring for status information
+ * @sw_size: the size of the SW state associated with each ring element
+ * @phys: the physical address of the allocated ring
+ * @metadata: address of the array holding the SW state for the ring
+ *
+ * Allocates resources for an SGE descriptor ring, such as Tx queues,
+ * free buffer lists, or response queues. Each SGE ring requires
+ * space for its HW descriptors plus, optionally, space for the SW state
+ * associated with each HW entry (the metadata). The function returns
+ * three values: the virtual address for the HW ring (the return value
+ * of the function), the bus address of the HW ring, and the address
+ * of the SW ring.
+ */
+static void *alloc_ring(struct rte_eth_dev *dev, const char *z_name,
+ uint16_t queue_id, int socket_id, size_t nelem,
+ size_t elem_size, size_t stat_size, size_t sw_size,
+ dma_addr_t *phys, void *metadata)
+{
+ size_t len = CXGBE_MAX_RING_DESC_SIZE * elem_size + stat_size;
+ char z_name_sw[RTE_MEMZONE_NAMESIZE];
+ const struct rte_memzone *tz;
+ void *s = NULL;
+
+ snprintf(z_name_sw, sizeof(z_name_sw), "eth_p%d_q%d_%s_sw_ring",
+ dev->data->port_id, queue_id, z_name);
+
+ dev_debug(adapter, "%s: nelem = %zu; elem_size = %zu; sw_size = %zu; "
+ "stat_size = %zu; queue_id = %u; socket_id = %d; z_name = %s;"
+ " z_name_sw = %s\n", __func__, nelem, elem_size, sw_size,
+ stat_size, queue_id, socket_id, z_name, z_name_sw);
+
+ /*
+ * Allocate TX/RX ring hardware descriptors. A memzone large enough to
+ * handle the maximum ring size is allocated in order to allow for
+ * resizing in later calls to the queue setup function.
+ */
+ tz = rte_eth_dma_zone_reserve(dev, z_name, queue_id, len, 4096,
+ socket_id);
+ if (!tz)
+ return NULL;
+
+ memset(tz->addr, 0, len);
+ if (sw_size) {
+ s = rte_zmalloc_socket(z_name_sw, nelem * sw_size,
+ RTE_CACHE_LINE_SIZE, socket_id);
+
+ if (!s) {
+ dev_err(adapter, "%s: failed to get sw_ring memory\n",
+ __func__);
+ return NULL;
+ }
+ }
+ if (metadata)
+ *(void **)metadata = s;
+
+ *phys = (uint64_t)tz->iova;
+ return tz->addr;
+}
+
+#define CXGB4_MSG_AN ((void *)1)
+
+/**
+ * rspq_next - advance to the next entry in a response queue
+ * @q: the queue
+ *
+ * Updates the state of a response queue to advance it to the next entry.
+ */
+static inline void rspq_next(struct sge_rspq *q)
+{
+ q->cur_desc = (const __be64 *)((const char *)q->cur_desc + q->iqe_len);
+ if (unlikely(++q->cidx == q->size)) {
+ q->cidx = 0;
+ q->gen ^= 1;
+ q->cur_desc = q->desc;
+ }
+}
+
+static inline void cxgbe_set_mbuf_info(struct rte_mbuf *pkt, uint32_t ptype,
+ uint64_t ol_flags)
+{
+ pkt->packet_type |= ptype;
+ pkt->ol_flags |= ol_flags;
+}
+
+static inline void cxgbe_fill_mbuf_info(struct adapter *adap,
+ const struct cpl_rx_pkt *cpl,
+ struct rte_mbuf *pkt)
+{
+ bool csum_ok;
+ u16 err_vec;
+
+ if (adap->params.tp.rx_pkt_encap)
+ err_vec = G_T6_COMPR_RXERR_VEC(ntohs(cpl->err_vec));
+ else
+ err_vec = ntohs(cpl->err_vec);
+
+ csum_ok = cpl->csum_calc && !err_vec;
+
+ if (cpl->vlan_ex)
+ cxgbe_set_mbuf_info(pkt, RTE_PTYPE_L2_ETHER_VLAN,
+ RTE_MBUF_F_RX_VLAN | RTE_MBUF_F_RX_VLAN_STRIPPED);
+ else
+ cxgbe_set_mbuf_info(pkt, RTE_PTYPE_L2_ETHER, 0);
+
+ if (cpl->l2info & htonl(F_RXF_IP))
+ cxgbe_set_mbuf_info(pkt, RTE_PTYPE_L3_IPV4,
+ csum_ok ? RTE_MBUF_F_RX_IP_CKSUM_GOOD :
+ RTE_MBUF_F_RX_IP_CKSUM_BAD);
+ else if (cpl->l2info & htonl(F_RXF_IP6))
+ cxgbe_set_mbuf_info(pkt, RTE_PTYPE_L3_IPV6,
+ csum_ok ? RTE_MBUF_F_RX_IP_CKSUM_GOOD :
+ RTE_MBUF_F_RX_IP_CKSUM_BAD);
+
+ if (cpl->l2info & htonl(F_RXF_TCP))
+ cxgbe_set_mbuf_info(pkt, RTE_PTYPE_L4_TCP,
+ csum_ok ? RTE_MBUF_F_RX_L4_CKSUM_GOOD :
+ RTE_MBUF_F_RX_L4_CKSUM_BAD);
+ else if (cpl->l2info & htonl(F_RXF_UDP))
+ cxgbe_set_mbuf_info(pkt, RTE_PTYPE_L4_UDP,
+ csum_ok ? RTE_MBUF_F_RX_L4_CKSUM_GOOD :
+ RTE_MBUF_F_RX_L4_CKSUM_BAD);
+}
+
+/**
+ * process_responses - process responses from an SGE response queue
+ * @q: the ingress queue to process
+ * @budget: how many responses can be processed in this round
+ * @rx_pkts: mbuf to put the pkts
+ *
+ * Process responses from an SGE response queue up to the supplied budget.
+ * Responses include received packets as well as control messages from FW
+ * or HW.
+ *
+ * Additionally choose the interrupt holdoff time for the next interrupt
+ * on this queue. If the system is under memory shortage use a fairly
+ * long delay to help recovery.
+ */
+static int process_responses(struct sge_rspq *q, int budget,
+ struct rte_mbuf **rx_pkts)
+{
+ int ret = 0, rsp_type;
+ int budget_left = budget;
+ const struct rsp_ctrl *rc;
+ struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
+
+ while (likely(budget_left)) {
+ if (q->cidx == ntohs(q->stat->pidx))
+ break;
+
+ rc = (const struct rsp_ctrl *)
+ ((const char *)q->cur_desc + (q->iqe_len - sizeof(*rc)));
+
+ /*
+ * Ensure response has been read
+ */
+ rmb();
+ rsp_type = G_RSPD_TYPE(rc->u.type_gen);
+
+ if (likely(rsp_type == X_RSPD_TYPE_FLBUF)) {
+ struct sge *s = &q->adapter->sge;
+ unsigned int stat_pidx;
+ int stat_pidx_diff;
+
+ stat_pidx = ntohs(q->stat->pidx);
+ stat_pidx_diff = P_IDXDIFF(q, stat_pidx);
+ while (stat_pidx_diff && budget_left) {
+ const struct rx_sw_desc *rsd =
+ &rxq->fl.sdesc[rxq->fl.cidx];
+ const struct rss_header *rss_hdr =
+ (const void *)q->cur_desc;
+ const struct cpl_rx_pkt *cpl =
+ (const void *)&q->cur_desc[1];
+ struct rte_mbuf *pkt, *npkt;
+ u32 len, bufsz;
+
+ rc = (const struct rsp_ctrl *)
+ ((const char *)q->cur_desc +
+ (q->iqe_len - sizeof(*rc)));
+
+ rsp_type = G_RSPD_TYPE(rc->u.type_gen);
+ if (unlikely(rsp_type != X_RSPD_TYPE_FLBUF))
+ break;
+
+ len = ntohl(rc->pldbuflen_qid);
+ BUG_ON(!(len & F_RSPD_NEWBUF));
+ pkt = rsd->buf;
+ npkt = pkt;
+ len = G_RSPD_LEN(len);
+ pkt->pkt_len = len;
+
+ /* Chain mbufs into len if necessary */
+ while (len) {
+ struct rte_mbuf *new_pkt = rsd->buf;
+
+ bufsz = min(get_buf_size(q->adapter,
+ rsd), len);
+ new_pkt->data_len = bufsz;
+ unmap_rx_buf(&rxq->fl);
+ len -= bufsz;
+ npkt->next = new_pkt;
+ npkt = new_pkt;
+ pkt->nb_segs++;
+ rsd = &rxq->fl.sdesc[rxq->fl.cidx];
+ }
+ npkt->next = NULL;
+ pkt->nb_segs--;
+
+ cxgbe_fill_mbuf_info(q->adapter, cpl, pkt);
+
+ if (!rss_hdr->filter_tid &&
+ rss_hdr->hash_type) {
+ pkt->ol_flags |= RTE_MBUF_F_RX_RSS_HASH;
+ pkt->hash.rss =
+ ntohl(rss_hdr->hash_val);
+ }
+
+ if (cpl->vlan_ex)
+ pkt->vlan_tci = ntohs(cpl->vlan);
+
+ rte_pktmbuf_adj(pkt, s->pktshift);
+ rxq->stats.pkts++;
+ rxq->stats.rx_bytes += pkt->pkt_len;
+ rx_pkts[budget - budget_left] = pkt;
+
+ rspq_next(q);
+ budget_left--;
+ stat_pidx_diff--;
+ }
+ continue;
+ } else if (likely(rsp_type == X_RSPD_TYPE_CPL)) {
+ ret = q->handler(q, q->cur_desc, NULL);
+ } else {
+ ret = q->handler(q, (const __be64 *)rc, CXGB4_MSG_AN);
+ }
+
+ if (unlikely(ret)) {
+ /* couldn't process descriptor, back off for recovery */
+ q->next_intr_params = V_QINTR_TIMER_IDX(NOMEM_TMR_IDX);
+ break;
+ }
+
+ rspq_next(q);
+ budget_left--;
+ }
+
+ /*
+ * If this is a Response Queue with an associated Free List and
+ * there's room for another chunk of new Free List buffer pointers,
+ * refill the Free List.
+ */
+
+ if (q->offset >= 0 && fl_cap(&rxq->fl) - rxq->fl.avail >= 64)
+ __refill_fl(q->adapter, &rxq->fl);
+
+ return budget - budget_left;
+}
+
+int cxgbe_poll(struct sge_rspq *q, struct rte_mbuf **rx_pkts,
+ unsigned int budget, unsigned int *work_done)
+{
+ struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
+ unsigned int cidx_inc;
+ unsigned int params;
+ u32 val;
+
+ if (unlikely(rxq->flags & IQ_STOPPED)) {
+ *work_done = 0;
+ return 0;
+ }
+
+ *work_done = process_responses(q, budget, rx_pkts);
+
+ if (*work_done) {
+ cidx_inc = R_IDXDIFF(q, gts_idx);
+
+ if (q->offset >= 0 && fl_cap(&rxq->fl) - rxq->fl.avail >= 64)
+ __refill_fl(q->adapter, &rxq->fl);
-/*
- * Rx buffer sizes for "usembufs" Free List buffers (one ingress packet
- * per mbuf buffer). We currently only support two sizes for 1500- and
- * 9000-byte MTUs. We could easily support more but there doesn't seem to be
- * much need for that ...
+ params = q->intr_params;
+ q->next_intr_params = params;
+ val = V_CIDXINC(cidx_inc) | V_SEINTARM(params);
+
+ if (unlikely(!q->bar2_addr)) {
+ u32 reg = is_pf4(q->adapter) ? MYPF_REG(A_SGE_PF_GTS) :
+ T4VF_SGE_BASE_ADDR +
+ A_SGE_VF_GTS;
+
+ t4_write_reg(q->adapter, reg,
+ val | V_INGRESSQID((u32)q->cntxt_id));
+ } else {
+ writel(val | V_INGRESSQID(q->bar2_qid),
+ (void *)((uintptr_t)q->bar2_addr + SGE_UDB_GTS));
+ /* This Write memory Barrier will force the
+ * write to the User Doorbell area to be
+ * flushed.
+ */
+ wmb();
+ }
+ q->gts_idx = q->cidx;
+ }
+ return 0;
+}
+
+/**
+ * bar2_address - return the BAR2 address for an SGE Queue's Registers
+ * @adapter: the adapter
+ * @qid: the SGE Queue ID
+ * @qtype: the SGE Queue Type (Egress or Ingress)
+ * @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues
+ *
+ * Returns the BAR2 address for the SGE Queue Registers associated with
+ * @qid. If BAR2 SGE Registers aren't available, returns NULL. Also
+ * returns the BAR2 Queue ID to be used with writes to the BAR2 SGE
+ * Queue Registers. If the BAR2 Queue ID is 0, then "Inferred Queue ID"
+ * Registers are supported (e.g. the Write Combining Doorbell Buffer).
*/
-#define FL_MTU_SMALL 1500
-#define FL_MTU_LARGE 9000
+static void __iomem *bar2_address(struct adapter *adapter, unsigned int qid,
+ enum t4_bar2_qtype qtype,
+ unsigned int *pbar2_qid)
+{
+ u64 bar2_qoffset;
+ int ret;
+
+ ret = t4_bar2_sge_qregs(adapter, qid, qtype, &bar2_qoffset, pbar2_qid);
+ if (ret)
+ return NULL;
+
+ return adapter->bar2 + bar2_qoffset;
+}
+
+int t4_sge_eth_rxq_start(struct adapter *adap, struct sge_eth_rxq *rxq)
+{
+ unsigned int fl_id = rxq->fl.size ? rxq->fl.cntxt_id : 0xffff;
+
+ rxq->flags &= ~IQ_STOPPED;
+ return t4_iq_start_stop(adap, adap->mbox, true, adap->pf, 0,
+ rxq->rspq.cntxt_id, fl_id, 0xffff);
+}
-static inline unsigned int fl_mtu_bufsize(struct adapter *adapter,
- unsigned int mtu)
+int t4_sge_eth_rxq_stop(struct adapter *adap, struct sge_eth_rxq *rxq)
{
- struct sge *s = &adapter->sge;
+ unsigned int fl_id = rxq->fl.size ? rxq->fl.cntxt_id : 0xffff;
- return ALIGN(s->pktshift + ETH_HLEN + VLAN_HLEN + mtu, s->fl_align);
+ rxq->flags |= IQ_STOPPED;
+ return t4_iq_start_stop(adap, adap->mbox, false, adap->pf, 0,
+ rxq->rspq.cntxt_id, fl_id, 0xffff);
}
-#define FL_MTU_SMALL_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_SMALL)
-#define FL_MTU_LARGE_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_LARGE)
+static int cxgbe_sge_fl_buf_size_index(const struct adapter *adap,
+ struct rte_mempool *mp)
+{
+ int fl_buf_size, size, delta, min_delta = INT_MAX;
+ unsigned int i, match = UINT_MAX;
+ const struct sge *s = &adap->sge;
+
+ size = rte_pktmbuf_data_room_size(mp) - RTE_PKTMBUF_HEADROOM;
+ for (i = 0; i < RTE_DIM(s->fl_buffer_size); i++) {
+ fl_buf_size = s->fl_buffer_size[i];
+ if (fl_buf_size > size || fl_buf_size == 0)
+ continue;
+
+ delta = size - fl_buf_size;
+ if (delta < 0)
+ delta = -delta;
+ if (delta < min_delta) {
+ min_delta = delta;
+ match = i;
+ }
+ }
+
+ if (match == UINT_MAX) {
+ dev_err(adap,
+ "Could not find valid buffer size for mbuf data room: %d\n",
+ size);
+ return -EINVAL;
+ }
+
+ return match;
+}
/*
- * Bits 0..3 of rx_sw_desc.dma_addr have special meaning. The hardware uses
- * these to specify the buffer size as an index into the SGE Free List Buffer
- * Size register array. We also use bit 4, when the buffer has been unmapped
- * for DMA, but this is of course never sent to the hardware and is only used
- * to prevent double unmappings. All of the above requires that the Free List
- * Buffers which we allocate have the bottom 5 bits free (0) -- i.e. are
- * 32-byte or or a power of 2 greater in alignment. Since the SGE's minimal
- * Free List Buffer alignment is 32 bytes, this works out for us ...
+ * @intr_idx: MSI/MSI-X vector if >=0, -(absolute qid + 1) if < 0
+ * @cong: < 0 -> no congestion feedback, >= 0 -> congestion channel map
*/
-enum {
- RX_BUF_FLAGS = 0x1f, /* bottom five bits are special */
- RX_BUF_SIZE = 0x0f, /* bottom three bits are for buf sizes */
- RX_UNMAPPED_BUF = 0x10, /* buffer is not mapped */
+int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
+ struct rte_eth_dev *eth_dev, int intr_idx,
+ struct sge_fl *fl, rspq_handler_t hnd, int cong,
+ struct rte_mempool *mp, int queue_id, int socket_id)
+{
+ struct port_info *pi = eth_dev->data->dev_private;
+ u8 pciechan, fl_buf_size_idx = 0;
+ struct sge *s = &adap->sge;
+ unsigned int nb_refill;
+ struct fw_iq_cmd c;
+ int ret, flsz = 0;
+
+ if (fl != NULL) {
+ ret = cxgbe_sge_fl_buf_size_index(adap, mp);
+ if (ret < 0)
+ return ret;
+
+ fl_buf_size_idx = ret;
+ }
+
+ /* Size needs to be multiple of 16, including status entry. */
+ iq->size = cxgbe_roundup(iq->size, 16);
+
+ iq->desc = alloc_ring(eth_dev, fwevtq ? "fwq_ring" : "rx_ring",
+ queue_id, socket_id, iq->size, iq->iqe_len,
+ 0, 0, &iq->phys_addr, NULL);
+ if (!iq->desc)
+ return -ENOMEM;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST |
+ F_FW_CMD_WRITE | F_FW_CMD_EXEC);
+
+ if (is_pf4(adap)) {
+ pciechan = pi->tx_chan;
+ c.op_to_vfn |= htonl(V_FW_IQ_CMD_PFN(adap->pf) |
+ V_FW_IQ_CMD_VFN(0));
+ if (cong >= 0)
+ c.iqns_to_fl0congen =
+ htonl(F_FW_IQ_CMD_IQFLINTCONGEN |
+ V_FW_IQ_CMD_IQTYPE(cong ?
+ FW_IQ_IQTYPE_NIC :
+ FW_IQ_IQTYPE_OFLD) |
+ F_FW_IQ_CMD_IQRO);
+ } else {
+ pciechan = pi->port_id;
+ }
+
+ c.alloc_to_len16 = htonl(F_FW_IQ_CMD_ALLOC | F_FW_IQ_CMD_IQSTART |
+ (sizeof(c) / 16));
+ c.type_to_iqandstindex =
+ htonl(V_FW_IQ_CMD_TYPE(FW_IQ_TYPE_FL_INT_CAP) |
+ V_FW_IQ_CMD_IQASYNCH(fwevtq) |
+ V_FW_IQ_CMD_VIID(pi->viid) |
+ V_FW_IQ_CMD_IQANDST(intr_idx < 0) |
+ V_FW_IQ_CMD_IQANUD(X_UPDATEDELIVERY_STATUS_PAGE) |
+ V_FW_IQ_CMD_IQANDSTINDEX(intr_idx >= 0 ? intr_idx :
+ -intr_idx - 1));
+ c.iqdroprss_to_iqesize =
+ htons(V_FW_IQ_CMD_IQPCIECH(pciechan) |
+ F_FW_IQ_CMD_IQGTSMODE |
+ V_FW_IQ_CMD_IQINTCNTTHRESH(iq->pktcnt_idx) |
+ V_FW_IQ_CMD_IQESIZE(ilog2(iq->iqe_len) - 4));
+ c.iqsize = htons(iq->size);
+ c.iqaddr = cpu_to_be64(iq->phys_addr);
+
+ if (fl) {
+ unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip);
+
+ /*
+ * Allocate the ring for the hardware free list (with space
+ * for its status page) along with the associated software
+ * descriptor ring. The free list size needs to be a multiple
+ * of the Egress Queue Unit and at least 2 Egress Units larger
+ * than the SGE's Egress Congestion Threshold
+ * (fl_starve_thres - 1).
+ */
+ if (fl->size < s->fl_starve_thres - 1 + 2 * 8)
+ fl->size = s->fl_starve_thres - 1 + 2 * 8;
+ fl->size = cxgbe_roundup(fl->size, 8);
+
+ fl->desc = alloc_ring(eth_dev, "fl_ring", queue_id, socket_id,
+ fl->size, sizeof(__be64), s->stat_len,
+ sizeof(struct rx_sw_desc),
+ &fl->addr, &fl->sdesc);
+ if (!fl->desc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ flsz = fl->size / 8 + s->stat_len / sizeof(struct tx_desc);
+ c.iqns_to_fl0congen |=
+ htonl(V_FW_IQ_CMD_FL0HOSTFCMODE(X_HOSTFCMODE_NONE) |
+ F_FW_IQ_CMD_FL0FETCHRO | F_FW_IQ_CMD_FL0DATARO);
+ if (is_pf4(adap) && cong >= 0)
+ c.iqns_to_fl0congen |=
+ htonl(V_FW_IQ_CMD_FL0CNGCHMAP(cong) |
+ F_FW_IQ_CMD_FL0CONGCIF |
+ F_FW_IQ_CMD_FL0CONGEN);
+
+ /* In T6, for egress queue type FL there is internal overhead
+ * of 16B for header going into FLM module.
+ * Hence maximum allowed burst size will be 448 bytes.
+ */
+ c.fl0dcaen_to_fl0cidxfthresh =
+ htons(V_FW_IQ_CMD_FL0FBMIN(chip_ver <= CHELSIO_T5 ?
+ X_FETCHBURSTMIN_128B :
+ X_FETCHBURSTMIN_64B) |
+ V_FW_IQ_CMD_FL0FBMAX(chip_ver <= CHELSIO_T5 ?
+ X_FETCHBURSTMAX_512B :
+ X_FETCHBURSTMAX_256B));
+ c.fl0size = htons(flsz);
+ c.fl0addr = cpu_to_be64(fl->addr);
+ }
+
+ if (is_pf4(adap))
+ ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c);
+ else
+ ret = t4vf_wr_mbox(adap, &c, sizeof(c), &c);
+ if (ret)
+ goto err;
+
+ iq->cur_desc = iq->desc;
+ iq->cidx = 0;
+ iq->gts_idx = 0;
+ iq->gen = 1;
+ iq->next_intr_params = iq->intr_params;
+ iq->cntxt_id = ntohs(c.iqid);
+ iq->abs_id = ntohs(c.physiqid);
+ iq->bar2_addr = bar2_address(adap, iq->cntxt_id, T4_BAR2_QTYPE_INGRESS,
+ &iq->bar2_qid);
+ iq->size--; /* subtract status entry */
+ iq->stat = (void *)&iq->desc[iq->size * 8];
+ iq->eth_dev = eth_dev;
+ iq->handler = hnd;
+ iq->port_id = eth_dev->data->port_id;
+ iq->mb_pool = mp;
+
+ /* set offset to -1 to distinguish ingress queues without FL */
+ iq->offset = fl ? 0 : -1;
+
+ if (fl) {
+ fl->cntxt_id = ntohs(c.fl0id);
+ fl->avail = 0;
+ fl->pend_cred = 0;
+ fl->pidx = 0;
+ fl->cidx = 0;
+ fl->alloc_failed = 0;
+ fl->fl_buf_size_idx = fl_buf_size_idx;
+
+ /*
+ * Note, we must initialize the BAR2 Free List User Doorbell
+ * information before refilling the Free List!
+ */
+ fl->bar2_addr = bar2_address(adap, fl->cntxt_id,
+ T4_BAR2_QTYPE_EGRESS,
+ &fl->bar2_qid);
+
+ nb_refill = refill_fl(adap, fl, fl_cap(fl));
+ if (nb_refill != fl_cap(fl)) {
+ ret = -ENOMEM;
+ dev_err(adap, "%s: mbuf alloc failed with error: %d\n",
+ __func__, ret);
+ goto refill_fl_err;
+ }
+ }
/*
- * XXX We shouldn't depend on being able to use these indices.
- * XXX Especially when some other Master PF has initialized the
- * XXX adapter or we use the Firmware Configuration File. We
- * XXX should really search through the Host Buffer Size register
- * XXX array for the appropriately sized buffer indices.
+ * For T5 and later we attempt to set up the Congestion Manager values
+ * of the new RX Ethernet Queue. This should really be handled by
+ * firmware because it's more complex than any host driver wants to
+ * get involved with and it's different per chip and this is almost
+ * certainly wrong. Formware would be wrong as well, but it would be
+ * a lot easier to fix in one place ... For now we do something very
+ * simple (and hopefully less wrong).
*/
- RX_SMALL_PG_BUF = 0x0, /* small (PAGE_SIZE) page buffer */
- RX_LARGE_PG_BUF = 0x1, /* buffer large page buffer */
+ if (is_pf4(adap) && !is_t4(adap->params.chip) && cong >= 0) {
+ u8 cng_ch_bits_log = adap->params.arch.cng_ch_bits_log;
+ u32 param, val, ch_map = 0;
+ int i;
- RX_SMALL_MTU_BUF = 0x2, /* small MTU buffer */
- RX_LARGE_MTU_BUF = 0x3, /* large MTU buffer */
-};
+ param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) |
+ V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DMAQ_CONM_CTXT) |
+ V_FW_PARAMS_PARAM_YZ(iq->cntxt_id));
+ if (cong == 0) {
+ val = V_CONMCTXT_CNGTPMODE(X_CONMCTXT_CNGTPMODE_QUEUE);
+ } else {
+ val = V_CONMCTXT_CNGTPMODE(
+ X_CONMCTXT_CNGTPMODE_CHANNEL);
+ for (i = 0; i < 4; i++) {
+ if (cong & (1 << i))
+ ch_map |= 1 << (i << cng_ch_bits_log);
+ }
+ val |= V_CONMCTXT_CNGCHMAP(ch_map);
+ }
+ ret = t4_set_params(adap, adap->mbox, adap->pf, 0, 1,
+ ¶m, &val);
+ if (ret)
+ dev_warn(adap->pdev_dev, "Failed to set Congestion Manager Context for Ingress Queue %d: %d\n",
+ iq->cntxt_id, -ret);
+ }
+
+ return 0;
+
+refill_fl_err:
+ t4_iq_free(adap, adap->mbox, adap->pf, 0, FW_IQ_TYPE_FL_INT_CAP,
+ iq->cntxt_id, fl->cntxt_id, 0xffff);
+err:
+ iq->cntxt_id = 0;
+ iq->abs_id = 0;
+ if (iq->desc)
+ iq->desc = NULL;
+
+ if (fl && fl->desc) {
+ rte_free(fl->sdesc);
+ fl->cntxt_id = 0;
+ fl->sdesc = NULL;
+ fl->desc = NULL;
+ }
+ return ret;
+}
+
+static void init_txq(struct adapter *adap, struct sge_txq *q, unsigned int id,
+ unsigned int abs_id)
+{
+ q->cntxt_id = id;
+ q->abs_id = abs_id;
+ q->bar2_addr = bar2_address(adap, q->cntxt_id, T4_BAR2_QTYPE_EGRESS,
+ &q->bar2_qid);
+ q->cidx = 0;
+ q->pidx = 0;
+ q->dbidx = 0;
+ q->in_use = 0;
+ q->equeidx = 0;
+ q->coalesce.idx = 0;
+ q->coalesce.len = 0;
+ q->coalesce.flits = 0;
+ q->last_coal_idx = 0;
+ q->last_pidx = 0;
+ q->stat = (void *)&q->desc[q->size];
+}
+
+int t4_sge_eth_txq_start(struct sge_eth_txq *txq)
+{
+ /*
+ * TODO: For flow-control, queue may be stopped waiting to reclaim
+ * credits.
+ * Ensure queue is in EQ_STOPPED state before starting it.
+ */
+ if (!(txq->flags & EQ_STOPPED))
+ return -(EBUSY);
+
+ txq->flags &= ~EQ_STOPPED;
+
+ return 0;
+}
+
+int t4_sge_eth_txq_stop(struct sge_eth_txq *txq)
+{
+ txq->flags |= EQ_STOPPED;
+
+ return 0;
+}
+
+int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
+ struct rte_eth_dev *eth_dev, uint16_t queue_id,
+ unsigned int iqid, int socket_id)
+{
+ int ret, nentries;
+ struct fw_eq_eth_cmd c;
+ struct sge *s = &adap->sge;
+ struct port_info *pi = eth_dev->data->dev_private;
+ u8 pciechan;
+
+ /* Add status entries */
+ nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
+
+ txq->q.desc = alloc_ring(eth_dev, "tx_ring", queue_id, socket_id,
+ txq->q.size, sizeof(struct tx_desc),
+ s->stat_len, sizeof(struct tx_sw_desc),
+ &txq->q.phys_addr, &txq->q.sdesc);
+ if (!txq->q.desc)
+ return -ENOMEM;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(V_FW_CMD_OP(FW_EQ_ETH_CMD) | F_FW_CMD_REQUEST |
+ F_FW_CMD_WRITE | F_FW_CMD_EXEC);
+ if (is_pf4(adap)) {
+ pciechan = pi->tx_chan;
+ c.op_to_vfn |= htonl(V_FW_EQ_ETH_CMD_PFN(adap->pf) |
+ V_FW_EQ_ETH_CMD_VFN(0));
+ } else {
+ pciechan = pi->port_id;
+ }
+
+ c.alloc_to_len16 = htonl(F_FW_EQ_ETH_CMD_ALLOC |
+ F_FW_EQ_ETH_CMD_EQSTART | (sizeof(c) / 16));
+ c.autoequiqe_to_viid = htonl(F_FW_EQ_ETH_CMD_AUTOEQUEQE |
+ V_FW_EQ_ETH_CMD_VIID(pi->viid));
+ c.fetchszm_to_iqid =
+ htonl(V_FW_EQ_ETH_CMD_HOSTFCMODE(X_HOSTFCMODE_NONE) |
+ V_FW_EQ_ETH_CMD_PCIECHN(pciechan) |
+ F_FW_EQ_ETH_CMD_FETCHRO | V_FW_EQ_ETH_CMD_IQID(iqid));
+ c.dcaen_to_eqsize =
+ htonl(V_FW_EQ_ETH_CMD_FBMIN(X_FETCHBURSTMIN_64B) |
+ V_FW_EQ_ETH_CMD_FBMAX(X_FETCHBURSTMAX_512B) |
+ V_FW_EQ_ETH_CMD_EQSIZE(nentries));
+ c.eqaddr = rte_cpu_to_be_64(txq->q.phys_addr);
+
+ if (is_pf4(adap))
+ ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c);
+ else
+ ret = t4vf_wr_mbox(adap, &c, sizeof(c), &c);
+ if (ret) {
+ rte_free(txq->q.sdesc);
+ txq->q.sdesc = NULL;
+ txq->q.desc = NULL;
+ return ret;
+ }
+
+ init_txq(adap, &txq->q, G_FW_EQ_ETH_CMD_EQID(ntohl(c.eqid_pkd)),
+ G_FW_EQ_ETH_CMD_PHYSEQID(ntohl(c.physeqid_pkd)));
+ txq->stats.tso = 0;
+ txq->stats.pkts = 0;
+ txq->stats.tx_cso = 0;
+ txq->stats.coal_wr = 0;
+ txq->stats.vlan_ins = 0;
+ txq->stats.tx_bytes = 0;
+ txq->stats.coal_pkts = 0;
+ txq->stats.mapping_err = 0;
+ txq->flags |= EQ_STOPPED;
+ txq->eth_dev = eth_dev;
+ txq->data = eth_dev->data;
+ t4_os_lock_init(&txq->txq_lock);
+ return 0;
+}
+
+int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq,
+ struct rte_eth_dev *eth_dev, uint16_t queue_id,
+ unsigned int iqid, int socket_id)
+{
+ int ret, nentries;
+ struct fw_eq_ctrl_cmd c;
+ struct sge *s = &adap->sge;
+ struct port_info *pi = eth_dev->data->dev_private;
+
+ /* Add status entries */
+ nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
+
+ txq->q.desc = alloc_ring(eth_dev, "ctrl_tx_ring", queue_id,
+ socket_id, txq->q.size, sizeof(struct tx_desc),
+ 0, 0, &txq->q.phys_addr, NULL);
+ if (!txq->q.desc)
+ return -ENOMEM;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(V_FW_CMD_OP(FW_EQ_CTRL_CMD) | F_FW_CMD_REQUEST |
+ F_FW_CMD_WRITE | F_FW_CMD_EXEC |
+ V_FW_EQ_CTRL_CMD_PFN(adap->pf) |
+ V_FW_EQ_CTRL_CMD_VFN(0));
+ c.alloc_to_len16 = htonl(F_FW_EQ_CTRL_CMD_ALLOC |
+ F_FW_EQ_CTRL_CMD_EQSTART | (sizeof(c) / 16));
+ c.cmpliqid_eqid = htonl(V_FW_EQ_CTRL_CMD_CMPLIQID(0));
+ c.physeqid_pkd = htonl(0);
+ c.fetchszm_to_iqid =
+ htonl(V_FW_EQ_CTRL_CMD_HOSTFCMODE(X_HOSTFCMODE_NONE) |
+ V_FW_EQ_CTRL_CMD_PCIECHN(pi->tx_chan) |
+ F_FW_EQ_CTRL_CMD_FETCHRO | V_FW_EQ_CTRL_CMD_IQID(iqid));
+ c.dcaen_to_eqsize =
+ htonl(V_FW_EQ_CTRL_CMD_FBMIN(X_FETCHBURSTMIN_64B) |
+ V_FW_EQ_CTRL_CMD_FBMAX(X_FETCHBURSTMAX_512B) |
+ V_FW_EQ_CTRL_CMD_EQSIZE(nentries));
+ c.eqaddr = cpu_to_be64(txq->q.phys_addr);
+
+ ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c);
+ if (ret) {
+ txq->q.desc = NULL;
+ return ret;
+ }
+
+ init_txq(adap, &txq->q, G_FW_EQ_CTRL_CMD_EQID(ntohl(c.cmpliqid_eqid)),
+ G_FW_EQ_CTRL_CMD_EQID(ntohl(c. physeqid_pkd)));
+ txq->adapter = adap;
+ txq->full = 0;
+ return 0;
+}
+
+static void free_txq(struct sge_txq *q)
+{
+ q->cntxt_id = 0;
+ q->sdesc = NULL;
+ q->desc = NULL;
+}
+
+static void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq,
+ struct sge_fl *fl)
+{
+ unsigned int fl_id = fl ? fl->cntxt_id : 0xffff;
+
+ t4_iq_free(adap, adap->mbox, adap->pf, 0, FW_IQ_TYPE_FL_INT_CAP,
+ rq->cntxt_id, fl_id, 0xffff);
+ rq->cntxt_id = 0;
+ rq->abs_id = 0;
+ rq->desc = NULL;
+
+ if (fl) {
+ free_rx_bufs(fl, fl->avail);
+ rte_free(fl->sdesc);
+ fl->sdesc = NULL;
+ fl->cntxt_id = 0;
+ fl->desc = NULL;
+ }
+}
+
+/*
+ * Clear all queues of the port
+ *
+ * Note: This function must only be called after rx and tx path
+ * of the port have been disabled.
+ */
+void t4_sge_eth_clear_queues(struct port_info *pi)
+{
+ struct adapter *adap = pi->adapter;
+ struct sge_eth_rxq *rxq;
+ struct sge_eth_txq *txq;
+ int i;
+
+ rxq = &adap->sge.ethrxq[pi->first_rxqset];
+ for (i = 0; i < pi->n_rx_qsets; i++, rxq++) {
+ if (rxq->rspq.desc)
+ t4_sge_eth_rxq_stop(adap, rxq);
+ }
+
+ txq = &adap->sge.ethtxq[pi->first_txqset];
+ for (i = 0; i < pi->n_tx_qsets; i++, txq++) {
+ if (txq->q.desc) {
+ struct sge_txq *q = &txq->q;
+
+ t4_sge_eth_txq_stop(txq);
+ reclaim_completed_tx(q);
+ free_tx_desc(q, q->size);
+ q->equeidx = q->pidx;
+ }
+ }
+}
+
+void t4_sge_eth_rxq_release(struct adapter *adap, struct sge_eth_rxq *rxq)
+{
+ if (rxq->rspq.desc) {
+ t4_sge_eth_rxq_stop(adap, rxq);
+ free_rspq_fl(adap, &rxq->rspq, rxq->fl.size ? &rxq->fl : NULL);
+ }
+}
+
+void t4_sge_eth_txq_release(struct adapter *adap, struct sge_eth_txq *txq)
+{
+ if (txq->q.desc) {
+ t4_sge_eth_txq_stop(txq);
+ reclaim_completed_tx(&txq->q);
+ t4_eth_eq_free(adap, adap->mbox, adap->pf, 0, txq->q.cntxt_id);
+ free_tx_desc(&txq->q, txq->q.size);
+ rte_free(txq->q.sdesc);
+ free_txq(&txq->q);
+ }
+}
+
+void t4_sge_eth_release_queues(struct port_info *pi)
+{
+ struct adapter *adap = pi->adapter;
+ struct sge_eth_rxq *rxq;
+ struct sge_eth_txq *txq;
+ unsigned int i;
+
+ rxq = &adap->sge.ethrxq[pi->first_rxqset];
+ /* clean up Ethernet Tx/Rx queues */
+ for (i = 0; i < pi->n_rx_qsets; i++, rxq++) {
+ /* Free only the queues allocated */
+ if (rxq->rspq.desc) {
+ t4_sge_eth_rxq_release(adap, rxq);
+ rte_eth_dma_zone_free(rxq->rspq.eth_dev, "fl_ring", i);
+ rte_eth_dma_zone_free(rxq->rspq.eth_dev, "rx_ring", i);
+ rxq->rspq.eth_dev = NULL;
+ }
+ }
+
+ txq = &adap->sge.ethtxq[pi->first_txqset];
+ for (i = 0; i < pi->n_tx_qsets; i++, txq++) {
+ /* Free only the queues allocated */
+ if (txq->q.desc) {
+ t4_sge_eth_txq_release(adap, txq);
+ rte_eth_dma_zone_free(txq->eth_dev, "tx_ring", i);
+ txq->eth_dev = NULL;
+ }
+ }
+}
+
+void t4_sge_tx_monitor_start(struct adapter *adap)
+{
+ rte_eal_alarm_set(50, tx_timer_cb, (void *)adap);
+}
+
+void t4_sge_tx_monitor_stop(struct adapter *adap)
+{
+ rte_eal_alarm_cancel(tx_timer_cb, (void *)adap);
+}
+
+/**
+ * t4_free_sge_resources - free SGE resources
+ * @adap: the adapter
+ *
+ * Frees resources used by the SGE queue sets.
+ */
+void t4_free_sge_resources(struct adapter *adap)
+{
+ unsigned int i;
+
+ /* clean up control Tx queues */
+ for (i = 0; i < ARRAY_SIZE(adap->sge.ctrlq); i++) {
+ struct sge_ctrl_txq *cq = &adap->sge.ctrlq[i];
+
+ if (cq->q.desc) {
+ reclaim_completed_tx_imm(&cq->q);
+ t4_ctrl_eq_free(adap, adap->mbox, adap->pf, 0,
+ cq->q.cntxt_id);
+ rte_eth_dma_zone_free(adap->eth_dev, "ctrl_tx_ring", i);
+ rte_mempool_free(cq->mb_pool);
+ free_txq(&cq->q);
+ }
+ }
+
+ /* clean up firmware event queue */
+ if (adap->sge.fw_evtq.desc) {
+ free_rspq_fl(adap, &adap->sge.fw_evtq, NULL);
+ rte_eth_dma_zone_free(adap->eth_dev, "fwq_ring", 0);
+ }
+}
/**
* t4_sge_init - initialize SGE
*/
static int t4_sge_init_soft(struct adapter *adap)
{
- struct sge *s = &adap->sge;
- u32 fl_small_pg, fl_large_pg, fl_small_mtu, fl_large_mtu;
u32 timer_value_0_and_1, timer_value_2_and_3, timer_value_4_and_5;
+ struct sge *s = &adap->sge;
u32 ingress_rx_threshold;
+ u8 i;
/*
* Verify that CPL messages are going to the Ingress Queue for
}
/*
- * Validate the Host Buffer Register Array indices that we want to
+ * Read the Host Buffer Register Array indices that we want to
* use ...
- *
- * XXX Note that we should really read through the Host Buffer Size
- * XXX register array and find the indices of the Buffer Sizes which
- * XXX meet our needs!
- */
-#define READ_FL_BUF(x) \
- t4_read_reg(adap, A_SGE_FL_BUFFER_SIZE0 + (x) * sizeof(u32))
-
- fl_small_pg = READ_FL_BUF(RX_SMALL_PG_BUF);
- fl_large_pg = READ_FL_BUF(RX_LARGE_PG_BUF);
- fl_small_mtu = READ_FL_BUF(RX_SMALL_MTU_BUF);
- fl_large_mtu = READ_FL_BUF(RX_LARGE_MTU_BUF);
-
- /*
- * We only bother using the Large Page logic if the Large Page Buffer
- * is larger than our Page Size Buffer.
- */
- if (fl_large_pg <= fl_small_pg)
- fl_large_pg = 0;
-
-#undef READ_FL_BUF
-
- /*
- * The Page Size Buffer must be exactly equal to our Page Size and the
- * Large Page Size Buffer should be 0 (per above) or a power of 2.
*/
- if (fl_small_pg != PAGE_SIZE ||
- (fl_large_pg & (fl_large_pg - 1)) != 0) {
- dev_err(adap, "bad SGE FL page buffer sizes [%d, %d]\n",
- fl_small_pg, fl_large_pg);
- return -EINVAL;
- }
- if (fl_large_pg)
- s->fl_pg_order = ilog2(fl_large_pg) - PAGE_SHIFT;
-
- if (adap->use_unpacked_mode) {
- int err = 0;
-
- if (fl_small_mtu < FL_MTU_SMALL_BUFSIZE(adap)) {
- dev_err(adap, "bad SGE FL small MTU %d\n",
- fl_small_mtu);
- err = -EINVAL;
- }
- if (fl_large_mtu < FL_MTU_LARGE_BUFSIZE(adap)) {
- dev_err(adap, "bad SGE FL large MTU %d\n",
- fl_large_mtu);
- err = -EINVAL;
- }
- if (err)
- return err;
- }
+ for (i = 0; i < RTE_DIM(s->fl_buffer_size); i++)
+ s->fl_buffer_size[i] = t4_read_reg(adap,
+ A_SGE_FL_BUFFER_SIZE0 +
+ i * sizeof(u32));
/*
* Retrieve our RX interrupt holdoff timer values and counter
int t4_sge_init(struct adapter *adap)
{
struct sge *s = &adap->sge;
- u32 sge_control, sge_control2, sge_conm_ctrl;
- unsigned int ingpadboundary, ingpackboundary;
+ u32 sge_control, sge_conm_ctrl;
int ret, egress_threshold;
/*
sge_control = t4_read_reg(adap, A_SGE_CONTROL);
s->pktshift = G_PKTSHIFT(sge_control);
s->stat_len = (sge_control & F_EGRSTATUSPAGESIZE) ? 128 : 64;
-
- /*
- * T4 uses a single control field to specify both the PCIe Padding and
- * Packing Boundary. T5 introduced the ability to specify these
- * separately. The actual Ingress Packet Data alignment boundary
- * within Packed Buffer Mode is the maximum of these two
- * specifications.
- */
- ingpadboundary = 1 << (G_INGPADBOUNDARY(sge_control) +
- X_INGPADBOUNDARY_SHIFT);
- s->fl_align = ingpadboundary;
-
- if (!is_t4(adap->params.chip) && !adap->use_unpacked_mode) {
- /*
- * T5 has a weird interpretation of one of the PCIe Packing
- * Boundary values. No idea why ...
- */
- sge_control2 = t4_read_reg(adap, A_SGE_CONTROL2);
- ingpackboundary = G_INGPACKBOUNDARY(sge_control2);
- if (ingpackboundary == X_INGPACKBOUNDARY_16B)
- ingpackboundary = 16;
- else
- ingpackboundary = 1 << (ingpackboundary +
- X_INGPACKBOUNDARY_SHIFT);
-
- s->fl_align = max(ingpadboundary, ingpackboundary);
- }
-
ret = t4_sge_init_soft(adap);
if (ret < 0) {
dev_err(adap, "%s: t4_sge_init_soft failed, error %d\n",
return 0;
}
+
+int t4vf_sge_init(struct adapter *adap)
+{
+ struct sge_params *sge_params = &adap->params.sge;
+ u32 sge_ingress_queues_per_page;
+ u32 sge_egress_queues_per_page;
+ u32 sge_ingress_rx_threshold;
+ u32 sge_timer_value_0_and_1;
+ u32 sge_timer_value_2_and_3;
+ u32 sge_timer_value_4_and_5;
+ u32 sge_congestion_control;
+ struct sge *s = &adap->sge;
+ unsigned int s_hps, s_qpp;
+ u32 sge_host_page_size;
+ u32 params[7], vals[7];
+ u32 sge_control;
+ int v;
+ u8 i;
+
+ /* query basic params from fw */
+ params[0] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ V_FW_PARAMS_PARAM_XYZ(A_SGE_CONTROL));
+ params[1] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ V_FW_PARAMS_PARAM_XYZ(A_SGE_HOST_PAGE_SIZE));
+ params[2] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ V_FW_PARAMS_PARAM_XYZ(A_SGE_TIMER_VALUE_0_AND_1));
+ params[3] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ V_FW_PARAMS_PARAM_XYZ(A_SGE_TIMER_VALUE_2_AND_3));
+ params[4] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ V_FW_PARAMS_PARAM_XYZ(A_SGE_TIMER_VALUE_4_AND_5));
+ v = t4vf_query_params(adap, 7, params, vals);
+ if (v != FW_SUCCESS)
+ return v;
+
+ sge_control = vals[0];
+ sge_host_page_size = vals[1];
+ sge_timer_value_0_and_1 = vals[2];
+ sge_timer_value_2_and_3 = vals[3];
+ sge_timer_value_4_and_5 = vals[4];
+
+ for (i = 0; i < RTE_DIM(s->fl_buffer_size); i++) {
+ params[0] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ V_FW_PARAMS_PARAM_XYZ(A_SGE_FL_BUFFER_SIZE0 +
+ i * sizeof(u32)));
+ v = t4vf_query_params(adap, 1, params, vals);
+ if (v != FW_SUCCESS)
+ return v;
+
+ s->fl_buffer_size[i] = vals[0];
+ }
+
+ /*
+ * Start by vetting the basic SGE parameters which have been set up by
+ * the Physical Function Driver.
+ */
+
+ if ((sge_control & F_RXPKTCPLMODE) !=
+ V_RXPKTCPLMODE(X_RXPKTCPLMODE_SPLIT)) {
+ dev_err(adapter->pdev_dev, "bad SGE CPL MODE\n");
+ return -EINVAL;
+ }
+
+ params[0] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ V_FW_PARAMS_PARAM_XYZ(A_SGE_INGRESS_RX_THRESHOLD));
+ params[1] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ V_FW_PARAMS_PARAM_XYZ(A_SGE_CONM_CTRL));
+ v = t4vf_query_params(adap, 2, params, vals);
+ if (v != FW_SUCCESS)
+ return v;
+ sge_ingress_rx_threshold = vals[0];
+ sge_congestion_control = vals[1];
+ params[0] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ V_FW_PARAMS_PARAM_XYZ(A_SGE_EGRESS_QUEUES_PER_PAGE_VF));
+ params[1] = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ V_FW_PARAMS_PARAM_XYZ(A_SGE_INGRESS_QUEUES_PER_PAGE_VF));
+ v = t4vf_query_params(adap, 2, params, vals);
+ if (v != FW_SUCCESS) {
+ dev_warn(adap, "Unable to get VF SGE Queues/Page; "
+ "probably old firmware.\n");
+ return v;
+ }
+ sge_egress_queues_per_page = vals[0];
+ sge_ingress_queues_per_page = vals[1];
+
+ /*
+ * We need the Queues/Page for our VF. This is based on the
+ * PF from which we're instantiated and is indexed in the
+ * register we just read.
+ */
+ s_hps = (S_HOSTPAGESIZEPF0 +
+ (S_HOSTPAGESIZEPF1 - S_HOSTPAGESIZEPF0) * adap->pf);
+ sge_params->hps =
+ ((sge_host_page_size >> s_hps) & M_HOSTPAGESIZEPF0);
+
+ s_qpp = (S_QUEUESPERPAGEPF0 +
+ (S_QUEUESPERPAGEPF1 - S_QUEUESPERPAGEPF0) * adap->pf);
+ sge_params->eq_qpp =
+ ((sge_egress_queues_per_page >> s_qpp)
+ & M_QUEUESPERPAGEPF0);
+ sge_params->iq_qpp =
+ ((sge_ingress_queues_per_page >> s_qpp)
+ & M_QUEUESPERPAGEPF0);
+
+ /*
+ * Now translate the queried parameters into our internal forms.
+ */
+ s->stat_len = ((sge_control & F_EGRSTATUSPAGESIZE)
+ ? 128 : 64);
+ s->pktshift = G_PKTSHIFT(sge_control);
+
+ /*
+ * A FL with <= fl_starve_thres buffers is starving and a periodic
+ * timer will attempt to refill it. This needs to be larger than the
+ * SGE's Egress Congestion Threshold. If it isn't, then we can get
+ * stuck waiting for new packets while the SGE is waiting for us to
+ * give it more Free List entries. (Note that the SGE's Egress
+ * Congestion Threshold is in units of 2 Free List pointers.)
+ */
+ switch (CHELSIO_CHIP_VERSION(adap->params.chip)) {
+ case CHELSIO_T5:
+ s->fl_starve_thres =
+ G_EGRTHRESHOLDPACKING(sge_congestion_control);
+ break;
+ case CHELSIO_T6:
+ default:
+ s->fl_starve_thres =
+ G_T6_EGRTHRESHOLDPACKING(sge_congestion_control);
+ break;
+ }
+ s->fl_starve_thres = s->fl_starve_thres * 2 + 1;
+
+ /*
+ * Save RX interrupt holdoff timer values and counter
+ * threshold values from the SGE parameters.
+ */
+ s->timer_val[0] = core_ticks_to_us(adap,
+ G_TIMERVALUE0(sge_timer_value_0_and_1));
+ s->timer_val[1] = core_ticks_to_us(adap,
+ G_TIMERVALUE1(sge_timer_value_0_and_1));
+ s->timer_val[2] = core_ticks_to_us(adap,
+ G_TIMERVALUE2(sge_timer_value_2_and_3));
+ s->timer_val[3] = core_ticks_to_us(adap,
+ G_TIMERVALUE3(sge_timer_value_2_and_3));
+ s->timer_val[4] = core_ticks_to_us(adap,
+ G_TIMERVALUE4(sge_timer_value_4_and_5));
+ s->timer_val[5] = core_ticks_to_us(adap,
+ G_TIMERVALUE5(sge_timer_value_4_and_5));
+ s->counter_val[0] = G_THRESHOLD_0(sge_ingress_rx_threshold);
+ s->counter_val[1] = G_THRESHOLD_1(sge_ingress_rx_threshold);
+ s->counter_val[2] = G_THRESHOLD_2(sge_ingress_rx_threshold);
+ s->counter_val[3] = G_THRESHOLD_3(sge_ingress_rx_threshold);
+ return 0;
+}